Search Results

Search found 10274 results on 411 pages for 'port 587'.

Page 105/411 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

  • Mac does not recognize wide screen

    - by DUKE
    I am using Mac OS X Lion 10.7.4 on my Mac mini, with Samsung monitor with default resolution 1360 x 768. My Mac mini is connected to Samsung VGA port by Apple mini port to VGA adapter. When starting, my Mac does not recognize the wide screen resolution and always starts in a 4:3 mode, (but it shows 1360x768 as the resolution in the settings). I have to do one of the following actions to bring my Mac to the wide screen resolution: (1) Changing to some other resolution and bring back to the default resolution. (2) Unplug the Apple mini port to VGA adapter and re-connect again. (3) Put the machine to sleep and wake it up again. I am using Ubuntu 12.04, (in a different partition) in the same hardware, but Ubuntu is perfectly recognizing the display.

    Read the article

  • Intranet Site Authentication Issues on SBS 2008

    - by mwillmott
    Hello, Simply, the Sharepoint intranet site that is automatically installed with SBS 2008 is bound to port 5555 in IIS so to get to it you can browse to server-name:5555 and then authenticate using domain credentials. I have added another binding on port 80 using a host header so intranet.localdomain.local (and added the required record in the DNS). This works fine from any computer on the domain, you can go to the nicer address and authenticate no problem. However, when you browse to the port 80 binding on the local server it reaches it but fails to authenticate. I cannot figure out why and it is really annoying. Not essential to fix but it would be nice. Any ideas? Michael

    Read the article

  • Varnish VCL Reload Fails After Adding Second Backend

    - by Andy
    I have been running Varnish on my production server successfully for several weeks now. Now I'm trying to configure Varnish to use a second backend for certain requests. My original working VCL (/etc/varnish/default.vcl) begins like this: backend default { .host = "127.0.0.1"; .port = "8080"; } ...rest of VCL... And I'm changing it to: backend default { .host = "127.0.0.1"; .port = "8080"; } backend backend2 { .host = "12.34.56.78"; .port = "80"; } ...rest of VCL... When I reload the VCL file, I get the following: Command failed with error code 106 Failed to reload /etc/varnish/default.vcl. Any idea what the error could be, or how I can get more information on the problem?

    Read the article

  • Linux IPTables / routing issue

    - by Jon
    Hi all, EDIT 1/3/10 22:00 GMT - rewrote some of it after further investigation It has been a while since I looked at IPtables and I seem to be worse than before as I can not seem to get my webserver online. Below is my firewall rules on the gateway server that is running the dhcp server accessing the net. The webserver is inside my network on a static IP (192.168.0.98, default port). When I use Nmap or GRC.com I see that port 80 is open on the gateway server but when I browse to it, (via public URL. http://www.houseofhawkins.com) it always fails with a connection error, (nmap cannot connect and figure out what the web server is either). I can nmap the webserver and browse to it just fine via same IP inside my network. I believe it is my IPTable rules that are not letting it through. Internally I can route all my requests. Each machine can browse to the website and traffic works just fine. I can MSTSC / ssh to all the webservers internally and they inturn can connect to the web. IPTABLE: *EDIT - Added new firewall rules 2/3/10 * #!/bin/sh iptables="/sbin/iptables" modprobe="/sbin/modprobe" depmod="/sbin/depmod" EXTIF="eth2" INTIF="eth1" load () { $depmod -a $modprobe ip_tables $modprobe ip_conntrack $modprobe ip_conntrack_ftp $modprobe ip_conntrack_irc $modprobe iptable_nat $modprobe ip_nat_ftp echo "enable forwarding.." echo "1" > /proc/sys/net/ipv4/ip_forward echo "enable dynamic addr" echo "1" > /proc/sys/net/ipv4/ip_dynaddr # start firewall # default policies $iptables -P INPUT DROP $iptables -F INPUT $iptables -P OUTPUT DROP $iptables -F OUTPUT $iptables -P FORWARD DROP $iptables -F FORWARD $iptables -t nat -F #echo " Opening loopback interface for socket based services." $iptables -A INPUT -i lo -j ACCEPT $iptables -A OUTPUT -o lo -j ACCEPT #echo " Allow all connections OUT and only existing and related ones IN" $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A OUTPUT -o $EXTIF -j ACCEPT $iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $iptables -A FORWARD -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A INPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " #echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF" $iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A OUTPUT -o $INTIF -j ACCEPT #echo " Allowing packets with ICMP data (i.e. ping)." $iptables -A INPUT -p icmp -j ACCEPT $iptables -A OUTPUT -p icmp -j ACCEPT $iptables -A INPUT -p udp -i $INTIF --dport 67 -m state --state NEW -j ACCEPT #echo " Port 137 is for NetBIOS." $iptables -A INPUT -i $INTIF -p udp --dport 137 -j ACCEPT $iptables -A OUTPUT -o $INTIF -p udp --dport 137 -j ACCEPT #echo " Opening port 53 for DNS queries." $iptables -A INPUT -p udp -i $EXTIF --sport 53 -j ACCEPT #echo " opening Apache webserver" $iptables -A PREROUTING -t nat -i $EXTIF -p tcp --dport 80 -j DNAT --to 192.168.0.96:80 $iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.0.96 --dport 80 -j ACCEPT } flush () { echo "flushing rules..." $iptables -P FORWARD ACCEPT $iptables -F INPUT $iptables -P INPUT ACCEPT echo "rules flushed" } case "$1" in start|restart) flush load ;; stop) flush ;; *) echo "usage: start|stop|restart." ;; esac exit 0 route info: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 5e0412a6.bb.sky * 255.255.255.255 UH 0 0 0 eth2 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 default 5e0412a6.bb.sky 0.0.0.0 UG 100 0 0 eth2 ifconfig: eth1 Link encap:Ethernet HWaddr 00:22:b0:cf:4a:1c inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:b0ff:fecf:4a1c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:79023 errors:0 dropped:0 overruns:0 frame:0 TX packets:57786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11580918 (11.5 MB) TX bytes:22872030 (22.8 MB) Interrupt:17 Base address:0x2b00 eth2 Link encap:Ethernet HWaddr 00:0c:f1:7c:45:5b inet addr:94.4.18.166 Bcast:94.4.18.166 Mask:255.255.255.255 inet6 addr: fe80::20c:f1ff:fe7c:455b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57038 errors:0 dropped:0 overruns:0 frame:0 TX packets:34532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:21631721 (21.6 MB) TX bytes:7685444 (7.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1517 (1.5 KB) TX bytes:1517 (1.5 KB) EDIT OK so as requested I will try and expand on my infrastructure: I previously had it setup with a Sky broadband modem router that did the DHCP and I used its web interface to port forward the web across to the web server. The network looked something like this: I have now replaced the sky modem with a dlink modem which gives the IP to the gateway server that now does the DHCP. It looks like: The internet connection is a standard broadband connection with a dynamic IP, (use zoneedit.com to keep it updated). I have tried it on each of the webservers(one Ubuntu Apache server and one WS2008 IIS7). I think there must also be an issue with my IPTable rules as it can route to my win7 box which has the default IIS7 page and that would not display when I forwarded all port 80 to it. I would be really grateful for any and all help with this. Thanks Jon

    Read the article

  • Multiple vlan issue with procurve switch

    - by Chris-AZ
    I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

    Read the article

  • Lots of TIME_WAIT connections in netstat (Windows Server 2008)

    - by Rhys Causey
    I'm having some issues on a Windows 2008 server with some network connections not going through. For instance, in a web application on the server, we need to open a socket connection to another server, and this fails sometimes with the following message: Only one usage of each socket address (protocol/network address/port) is normally permitted I looked up the error, which led me to this page: http://msdn.microsoft.com/en-us/library/aa560610(v=bts.20).aspx, which indicates that it might be TCP/IP port exhaustion. When I perform netstat -n, I get tons of TIME_WAIT connections on port 80. Does anyone have any idea what could be causing this?

    Read the article

  • Isolating VMware virtual machines from the network

    - by jetboy
    I have: VMware Workstation 7 running on a Windows 7 box (with a single NIC), with multiple virtual machines running a range of OSs. The host box is connected to a WRT54G router running Tomato firmware. The router is acting as a wireless bridge to another WRT54G that's wired to my broadband modem. I can access the VMs externally via VNC using VMware's Remote Display. Over time I've had these running: a. Using NAT networking (single IP) with port forwarding on the router and a custom port in VMware for each VM. b. Using bridged networking with static IPs assigned to each VM via MAC address, and port forwarding on the router to each IP running with standard ports. Either way, the host box, and other physical machines on the network are accessible from the VMs. Is there a way to isolate the VMs from the rest of the network, but still maintain internet access and remote VNC to the VMs?

    Read the article

  • Unable to connect to Adobe Connect

    - by ub3rst4r
    I am having troubles trying to connect my colleges Adobe Connect. I have done the test meeting connection and it will say "Unable to connect". I have tried connecting on 3 other computers and it works with flying colors. I am running Norton 360 on my computer and I also tried it on my other laptop thats also running Norton 360 and it works on that laptop. I also checked my hosts file and that is not the problem because I am able to connect to the server (on port 80) but not the Adobe Connect port (port 1935). The only thing in it is "127.0.0.1 localhost" Here are the details from the log that the test created: Player Version: WIN 11,3,300,271 App-Server returned: code:ok, servers=rtmp://connect.bowvalleycollege.ca:1935/_rtmp://localhost:8506/,rtmpt://connect.bowvalleycollege.ca:443/_rtmp://localhost:8506/ ERROR: FMS Server did not return correctly! Here is my specifications: Windows 7 SP1 x64 Norton 360 v6.3 (latest) It won't connect in Firefox v15, Chrome v19, or IE9 All of my computers are connected through the same router (D-Link DIR-625) Any ideas?

    Read the article

  • WinXP How to Tunnel LPT over USB

    - by Michael Pruitt
    I have a windows program that accesses a device connected to a LPT (1-3) 25 pin port. The communication is bidirectional, and I suspected the control lines are also accessed directly. I would like to migrate the device to a machine that does not have a LPT port. I saw the dos2usb software, but that takes the output (from a DOS program) and 'prints' it formatted for a specific printer. I need a raw LPT connection, and a cable that provides access to all the control signals. I do have a USB to 36-pin Centronics that may have the extra signals. I use it with a vinyl cutter that doesn't like most of the USB dongles. It comes up as USB001. Would adding and sharing a generic printer, then mapping LPT1 to the share get me closer? Would that work for a parallel port scanner? My preferred solution is a USB cable with a driver that will map it to LPT1, LPT2, or LPT3.

    Read the article

  • Uninstall last n of ports/packages

    - by Radio
    While compiling some port, I realized that it depends on 1000+ of other ports and will install forever until I die or my disk is full (my hdd is really small). I interrupted make install clean. How do I uninstall and clean those dependencies which have already been built and installed? (there are at least 100+ of them) pkg_cutleaves wont work in this case, since the main port wasn't registered yet. Please help. FreeBSD 9.0-RELEASE amd64 EDIT: Another way to ask this question: How can I see all dependencies for a non-registered port, and all subdependencies for those dependencies, independent with previously installed ports or their [sub]dependencies?

    Read the article

  • Unexpected "Connection timed out: proxy connect" lines in Apache error.log

    - by Gregg Lind
    I see some unexpected lines in my Apache (1.3!) error.log. What is happening here? My isp has complained in the past about proxying attempts... how do I check for them? [Sun Apr 4 16:43:32 2010] [error] [client 60.173.11.34] (110)Connection timed out: proxy connect to 61.132.221.146 port 80 failed [Sun Apr 4 16:44:11 2010] [error] [client 60.173.11.34] (110)Connection timed out: proxy connect to 61.132.221.146 port 80 failed [Sun Apr 4 16:45:34 2010] [error] [client 79.2.28.220] (110)Connection timed out: proxy connect to 203.212.171.170 port 80 failed (If more information would be useful, please ask me to clarify!)

    Read the article

  • Multiple home routers

    - by netvope
    Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

    Read the article

  • Multiple home routers

    - by netvope
    Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

    Read the article

  • How do I tell sudo to write files with a umask of 0022?

    - by mipadi
    I recently upgrading to Snow Leopard. I have noticed that some files written by MacPorts are installed with the wrong permission -- they are written with a umask of 0077. I think I have narrowed down the problem: The port command is invoked via sudo. My .bashrc file specifies a umask of 0077. On older versions of OS X (10.5 and below), sudo used the umask of the root user (which was 0022); however, now it uses my umask of 0077. Is there anyway to have sudo use the old behavior? Right now, it's kind of annoying because I have to use sudo to run simple commands like port installed, port outdated, etc. (The problem is described in more detail in this MacPorts ticket.) Edit I discovered the umask option for sudo, and in /etc/sudoers I added the following line: Defaults umask=0022 However, this did not function as desired, because the real umask used by sudo is the union of the user mask with this default mask.

    Read the article

  • Amazon EC2 SSH Failed to connect "Bad File Number"

    - by Mark McCook
    This is the command I am told to use by clicking connect in the control panel "ssh -i private_key.pem root@instancePublicDNS" Well that one failed so I wanted to know what happen so I ran "ssh -vvv private_key.pem root@instancePublicDNS" OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug2: ssh_connect: needpriv 0 debug1: Connecting to private_key.pem [...] port 22. debug1: connect to address ... port 22: Attempt to connect timed out without establishing a connection ssh: connect to host private_key.pem port 22: Bad file number Any Ideas? I have searched for the answer on google and serverfault, I found a few possible solutions that did not work. info about the instance AMI-ID : ami-688c7801 ( ubuntu 10.10 Server )

    Read the article

  • Network wide rule to forwared IP address

    - by Patrick
    Hi, we have a virtual machine which hosts a web based bug tracker in our network which is reached internally via e.g. 192.168.1.5:9800. From the outside we made a port forwarding in our firewall so that the web site can be reached via e.g. 72.10.10.10:9800. Now that works fine but the problem is that we got different IP addresses to reach the same service depending if we are in the office or at home and when the service sends out an email the link doesn't always work :) So we are looking for a solution to fix it. One could be to make a rule in out firewall that all communication to 72.10.10.10:9800 is forwarded to 192.168.1.5:9800... If that's possible that is considering it's an IP address + a port. The reason we used a port is because we only got one static public IP address but multiple virtual web appliances. Thanks for any suggestions or solutions :) Patrick PS: The network is a Win 2008 R2 domain by the way

    Read the article

  • Remote servlet by mod_jk ?

    - by marioosh.net
    I have remote servlet for example: h*tps://[ip_address]/servlet (h*tps://[ip_address]/ - Tomcat main page) that i need to configure on local Apache HTTPd server. My mod_jk configuration looks like below, but doesn't work. Something works, because when i type h*tps://localhost/console in a browser i get Tomcat error page "HTTP Status 404 - /console/". JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/mod_jk.log JkLogLevel info JkMount /console/* ajp13 workers.properties: worker.ajp13.type=ajp13 worker.ajp13.host=[ip_address] worker.ajp13.port=8009 Remote Tomcat is configured good i think - listen on port 8009 and servlet h*tps://[ip_address]/servlet works too. <Connector port="8009" protocol="AJP/1.3" redirectPort="443" /> Anybody helps ?

    Read the article

  • SFTP is not connecting to remote server

    - by Crono15
    $ sftp -vvv Remote_IP Connecting to Remote_IP... OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to Remote_IP [Remote_IP] port 22. debug1: connect to address Remote_IP port 22: Operation timed out ssh: connect to host Remote_IP port 22: Operation timed out Connection closed I set up an account for SFTP only access with a chroot. I tested that on the server and it works fine. The problem is, I could not get remote SFTP access to the server to work right. The example above is what I keep on running into. I have been trying to figure out how to solve this problem for 2 days now. I am not sure if it have to do with /etc/ssh/sshd_config. Is it something that I am not aware of? I am hoping that you could help point me to the right place for this issue.

    Read the article

  • I need access control within the same network/VLAN

    - by Sadiq ali
    Hi, I have a single network/VLAN and I want to block some traffic and allow some traffic in my network, is this possible using a L2 or L3 switch? If so which switches support this feature and what would be the commands to configure this? I have already tried this using access lists by applying it to an ethernet port but if I apply it on one port it will automatically work on incoming traffic on that port but I mean it to work on only outgoing traffic as per my ACL. Do you have any suggestions please?

    Read the article

  • Slower than expected 802.11n wireless network speeds

    - by Ian
    I have two ASUS laptops running Windows 7 connected wirelessly via 802.11n at 150 Mbit, as reported by Task Manager. The router is Netgear WNDR3700. When testing the wireless connection speed using iperf, I'm not getting nearly 150 Mbit: C:\>iperf -c 10.0.0.123 -t 30 ------------------------------------------------------------ Client connecting to 10.0.0.123, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 10.0.0.116 port 53819 connected with 10.0.0.123 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-30.0 sec 41.2 MBytes 11.5 Mbits/sec That's a typical result. Running parallel client threads does not increase the overall total speed. Why would I only be getting 11.5 Mbit on a 150 Mbit connection?

    Read the article

  • VMware networking - PortChannel or not?

    - by dunxd
    My ESX hosts each have 8 NICS. I have set up 2 NICs for our iSCSI SAN - each is connected to a different SAN switch. 2 NICs are set up for vMotion and Service Console - these are each connected to a different core switch (ports are trunked with VLANs dedicated to vMotion and Management) I now have four ports left over. Currently we have these set up each going into our default VLAN. Two NICs are connected to one core-switch and two are connected to the other. We decided to aggregate the connections to each switch - so they are teamed at the vswitch end, and port channelled at the physical switch end. I am now reading that port channelling these connections is not particularly useful, perhaps even over complicating things. Is there a particular problem with using port channels for VMware? What method provides the best balance between redundancy and performance?

    Read the article

  • pfSense + DDoS Protection

    - by Jeremy
    I run a gaming community on a colo with a 100Mbps port. I want to buy a very cheap 35 dollar server with the same 100Mbps port, and run pfSense to use as a hardware firewall. I'm dealing with a bunch of 14 year old kids that have access to botnets, so it can become a bit necessary to get something like this. My overall question, is using pfSense on a cheap identical datacenter/port speed server worth it to actually block DDoS attacks? A bit more into detail since I assume you will ask this, the attacks we receive are normally around 1Gbps. We currently run CentOS using CSF Firewall, and even when using a software firewall, we block 500Mbps UDP floods, or just generic attacks pretty easily. Thanks, - Necro

    Read the article

  • How to configure LAN IP Filter on Huawei E586 UMTS Modem

    - by Mose
    I need to prevent clients of an Huawei E586 UMTS to WiFi modem from downloading much data from specific servers eg. Windows update or OSX update. On the config page of the device there's an "LAN IP Filter" which seems pretty good but I can't figure out the right settings. The mask looks like this: The help pages states the following: My problem with this is, I want some wildcard for the local ip and port. In my opinion the help page can not be correct by "lan port: enter 80" because the source port is normally dynamic. I tried to set it up like stated there but as expected it doesn't work. As wildcards I tried * and "ALL" but nothing worked as it prevents me from saving settings with an "wrong value" error. Any suggestions? Thanks in advance!

    Read the article

  • supervise apache with daemontools

    - by perlwle
    I am trying to setup daemontools for two apaches in one server. one apache 2.2 listening on port 80 proxy request to a second apache 1.3 listening on port 8888. ./run script as following: #!/bin/sh # apache 1.3 exec /apache_1_3/apache/bin/httpd -F #!/bin/sh # apache 2.2 exec /apache_2_2/apache/bin/httpd -D FOREGROUND daemontools monitors both apache fine. however, If I stop apache2.2 (using svc -t or apachectl), the apache 1.3 will see the following error in error_log [crit] (98)Address already in use: make_sock: could not bind to port 8888 I had to manually apachectl stop the apache1.3 to stop the error message clobber the log file. There is no such problem before using daemontools. any idea why this is happening?

    Read the article

  • Virtualhost entries gets over-written when apache httpd.conf is rebuilt

    - by Amitabh
    Background: We have been trying to get a wildcard SSL working on multiple sub domains on a single dedicated address.. We have two sub domains next.my-personal-website.com and blog.my-personal-website.com Part of our strategy has been to edit the httpd.conf and add the NameVirtualHost xx.xx.144.72:443 directive and the virtualhost entries for port 443 for the subdomains there. This works good if we just edit the httpd.conf, add the entries, save it and restart the apache. The problem: But if we add a new sub domain from cpanel or we run the # /usr/local/cpanel/bin/apache_conf_distiller --update # /scripts/rebuildhttpdconf the virtualhost entries that we added manually are no more there in the newly generated httpd.conf file. Only the virtualhost entry for the main domain for port 443 that was there before we made edits to the httpd.conf is there(assuming we are not discussing virtualhost entries for port 80). I understand we need to put the new virtualhost entries in some include files as mentioned here in the cpanel documentation. But am not sure where to. So the question would be where do I put the NameVirtualHost xx.xx.144.72:443 directive and the two virtualhost directive for port 443, so that they are not overwritten when httpd.conf is rebuilt/regenerated later. Virtualhost entries: The two virtualhost entries for the subdomains are: <VirtualHost xx.xx.144.72:443> ServerName next.my-personal-website.com ServerAlias www.next.my-personal-website.com DocumentRoot /home/myguardi/public_html/next.my-personal-website.com ServerAdmin [email protected] UseCanonicalName On CustomLog /usr/local/apache/domlogs/next.my-personal-website.com combined CustomLog /usr/local/apache/domlogs/next.my-personal-website.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ## User myguardi # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup myguardi myguardi </IfModule> <IfModule !mod_disable_suexec.c> SuexecUserGroup myguardi myguardi </IfModule> ScriptAlias /cgi-bin/ /home/myguardi/public_html/next.my-personal-website.com/cgi-bin/ SSLEngine on SSLCertificateFile /etc/ssl/certs/my-personal-website.com.crt SSLCertificateKeyFile /etc/ssl/private/my-personal-website.com.key SSLCACertificateFile /etc/ssl/certs/my-personal-website.com.cabundle CustomLog /usr/local/apache/domlogs/next.my-personal-website.com-ssl_log combined SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/home/myguardi/public_html/cgi-bin"> SSLOptions +StdEnvVars </Directory> and <VirtualHost xx.xx.144.72:443> ServerName blog.my-personal-website.com ServerAlias www.blog.my-personal-website.com DocumentRoot /home/myguardi/public_html/blog.my-personal-website.com ServerAdmin [email protected] UseCanonicalName On CustomLog /usr/local/apache/domlogs/blog.my-personal-website.com combined CustomLog /usr/local/apache/domlogs/blog.my-personal-website.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ## User myguardi # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup myguardi myguardi </IfModule> <IfModule !mod_disable_suexec.c> SuexecUserGroup myguardi myguardi </IfModule> ScriptAlias /cgi-bin/ /home/myguardi/public_html/blog.my-personal-website.com/cgi-bin/ SSLEngine on SSLCertificateFile /etc/ssl/certs/my-personal-website.com.crt SSLCertificateKeyFile /etc/ssl/private/my-personal-website.com.key SSLCACertificateFile /etc/ssl/certs/my-personal-website.com.cabundle CustomLog /usr/local/apache/domlogs/blog.my-personal-website.com-ssl_log combined SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/home/myguardi/public_html/cgi-bin"> SSLOptions +StdEnvVars </Directory> and the automatically generated virtualhost entry for the main domain for port 443 is <VirtualHost xx.xx.144.72:443> ServerName my-personal-website.com ServerAlias www.my-personal-website.com DocumentRoot /home/myguardi/public_html ServerAdmin [email protected] UseCanonicalName Off CustomLog /usr/local/apache/domlogs/my-personal-website.com combined CustomLog /usr/local/apache/domlogs/my-personal-website.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ## User myguardi # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup myguardi myguardi </IfModule> <IfModule !mod_disable_suexec.c> SuexecUserGroup myguardi myguardi </IfModule> ScriptAlias /cgi-bin/ /home/myguardi/public_html/cgi-bin/ SSLEngine on SSLCertificateFile /etc/ssl/certs/my-personal-website.com.crt SSLCertificateKeyFile /etc/ssl/private/my-personal-website.com.key SSLCACertificateFile /etc/ssl/certs/my-personal-website.com.cabundle CustomLog /usr/local/apache/domlogs/my-personal-website.com-ssl_log combined SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/home/myguardi/public_html/cgi-bin"> SSLOptions +StdEnvVars </Directory> # To customize this VirtualHost use an include file at the following location # Include "/usr/local/apache/conf/userdata/ssl/2/myguardi/my-personal-website.com/*.conf" I really appreciate if somebody can tell me how to proceed on this. Thank you. Update: Include directives present are: `Include "/usr/local/apache/conf/includes/pre_main_global.conf" Include "/usr/local/apache/conf/includes/pre_main_2.conf" Include "/usr/local/apache/conf/php.conf" Include "/usr/local/apache/conf/includes/errordocument.conf" Include "/usr/local/apache/conf/modsec2.conf" Include "/usr/local/apache/conf/includes/pre_virtualhost_global.conf" Include "/usr/local/apache/conf/includes/pre_virtualhost_2.conf" ` These are the entries that are generated before any virtualhost entry is defined. Towards the end of the httpd.conf file , the following two entries are added Include "/usr/local/apache/conf/includes/post_virtualhost_global.conf" Include "/usr/local/apache/conf/includes/post_virtualhost_2.conf" The older httpd.conf file before we added the virtualhost entries for sub domains for port 443 can be viewed here

    Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >