Search Results

Search found 19701 results on 789 pages for 'disk images'.

Page 106/789 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

• Raid-5 Performance per spindle scaling

  - by Bill N.

  So I am stuck in a corner, I have a storage project that is limited to 24 spindles, and requires heavy random Write (the corresponding read side is purely sequential). Needs every bit of space on my Drives, ~13TB total in a n-1 raid-5, and has to go fast, over 2GB/s sort of fast. The obvious answer is to use a Stripe/Concat (Raid-0/1), or better yet a raid-10 in place of the raid-5, but that is disallowed for reasons beyond my control. So I am here asking for help in getting a sub optimal configuration to be as good as it can be. The array built on direct attached SAS-2 10K rpm drives, backed by a ARECA 18xx series controller with 4GB of cache. 64k array stripes and an 4K stripe aligned XFS File system, with 24 Allocation groups (to avoid some of the penalty for being raid 5). The heart of my question is this: In the same setup with 6 spindles/AG's I see a near disk limited performance on the write, ~100MB/s per spindle, at 12 spindles I see that drop to ~80MB/s and at 24 ~60MB/s. I would expect that with a distributed parity and matched AG's, the performance should scale with the # of spindles, or be worse at small spindle counts, but this array is doing the opposite. What am I missing ? Should Raid-5 performance scale with # of spindles ? Many thanks for your answers and any ideas, input, or guidance. --Bill Edit: Improving RAID performance The other relevant thread I was able to find, discusses some of the same issues in the answers, though it still leaves me with out an answer on the performance scaling.

  Read the article

• Looking to replace Ghost with FSArchiver or Clonezilla, few questions about capabilities

  - by Daniel Wright

  I work for a PC Repair company and we are looking into setting up a dedicated machine with externally accessible SATA bays to clone harddrives as a safety net incase something goes wrong during a repair. We currently use a SATA/PATA to USB bridge called MagicBridge and Norton Ghost on any workstation, but we're looking to move away from Ghost. We have a computer with a large RAID5 array with Windows Server 2008 Standard currently installed, but this can be replaced with a flavour of *nix. I have some experience with Clonezilla, but FSArchiver also seems like a suitable replacment too. My Head Technician wants to know if my chosen solution (probably Clonezilla or FSArchiver, but I'm open to free suggestions) is capable of: Cloning a degraded RAID, such as a single drive from a RAID1 mirror without complaining Producing images that are easily mountable (he'd prefer them to be mountable in Windows, but if there is no other easy way, *nix should be fine) akin to Ghost Explorer so individual files can be restored as well as being able to do bare metal restores. My apologies for wordiness but I wanted to be thorough in my explaination. Thanks for any suggestions or tips :) EDIT: I've just found out that Clonezilla has a workaround for cloning RADI1 drives EDIT2: Found the answer to both of my questions, aparently I wasn't phrasing my searches right, could this question be deleted please?

  Read the article

• Why does hiberfil.sys come back from the dead on Windows 7?

  - by Corey White

  I have Windows 7 running on a small (40GB) partition, with 4GB ram. This means that the hiberfil.sys file created by Hibernate takes up a significant portion of the available diskspace. I would like to remove it. I am aware that I can disable Hibernate and remove hiberfil.sys by entering powercfg -h off in an elevated command prompt. This works -- the file is immediately removed, and after doing so, the HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Power\HibernateEnabled key is (correctly) set to 0. However, the next time I reboot the PC, hiberfil.sys returns from the dead, Hibernate is reenabled, and that registry key has returned to 1. I'm pretty much at my wits' end with this. Almost everything I can find online related to removing the hiberfil.sys file simply suggests using powercfg to turn off hibernation, and that appears to work for just about everyone. But it just keeps coming back for me! (Like a vampire, sucking up my disk space.) I did find one other thread from someone who seems to have had the same issue, but none of the suggestions there worked for the original poster (or for me). Still, I have tried everything listed there, including: Disabling hybrid sleep Disabling Hibernate through the command prompt, through the Power Options GUI, and through both (in both orders) Manually changing the HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Power\HibernateEnabled key Pretty much everything else I can think of! I do want to reiterate that I have no problem removing the file -- that works great. It just comes back after every reboot. I'm about ready to throw in the towel and just run a script on login to disable Hibernate each time, even though that seems like a crazily hacky "solution" . . . but I was hoping someone here could suggest something else, first. Thanks!

  Read the article

• Solaris 10: How to image a machine?

  - by nonot1

  I've got a Solaris 10 workstation that I'd like to create a full image backup from. The machine has 2 drives, one UFS for system root, and 1 ZFS for data storage. I intend to add a third HD to keep the backup images of both primary drives (including any zfs snapshots). The purpose is not disaster recovery, but rather to allow me to easily blow away a series of application installation/configuration changes I intend to try. What's the best way to do this? I'm not too familiar with Solaris, but have some basic Linux knowledge. I looked at CloneZilla, but it does not support Solaris. I'm OK with just a dd | gzip > image style solution, but I'd need some way to first zero-out the non-used blocks on the primary drives to aid gzip. They are are much larger than my 3rd drive, but hardly have any real data. Update to clarify: I specifically want to avoid using any file-system snapshot functionality, because part of the app configuration changes involve/depend slightly on existing and new snapshots. Ideally the full collection of snapshots should be part of the backup. Virtualization not an option, because the goal is to do performance evaluation on a very specific HW configuration. For the same reason, the spurious "back up" snapshots could skew performance data. Thank you

  Read the article

• Slow filesystem access

  - by danneh3826

  I'm trying to diagnose a slow filesystem issue on a server I look after. It's been ongoing for quite some time, and I've run out of ideas as to what I can try. Here's the thick of it. The server itself is a Dell Poweredge T310. It has 4 SAS hard drives in it, configured at RAID5, and is running Citrix XenServer 5.6. The VM is a (relatively) old Debian 5.0.6 installation. It's given 4 cores, and 4Gb's of RAM. It has 3 volumes. A 10Gb volume (ext3) for the system, 980Gb volume (xfs) for data (~94% full), and another 200Gb volume (xfs) for data (~13% full). Now here's the weird thing. Read/write access to the 980Gb volume is really slow. I might get 5Mb/s out of it if I'm lucky. At first I figured it was actually disk access in the system, or at a hypervisor level, but ruled that out entirely as other VMs on the same host are running perfectly fine (a good couple hundred Mb/s disk r/w access). So then I started to target this particular VM. I started thinking it was XFS, but to prove it I wasn't going to attempt to change the filesystem on the 980Gb drive, with years and years of billions of files on there. So I provisioned the 200Gb drive, and did the same read/write test (basically dd), and got a good couple hundred Mb/s r/w access to it. So that ruled out the VM, the hardware, and the filesystem type. There's also a lot of these in /var/log/kern.log; (sorry, this is quite long) Sep 4 10:16:59 uriel kernel: [32571790.564689] httpd: page allocation failure. order:5, mode:0x4020 Sep 4 10:16:59 uriel kernel: [32571790.564693] Pid: 7318, comm: httpd Not tainted 2.6.32-4-686-bigmem #1 Sep 4 10:16:59 uriel kernel: [32571790.564696] Call Trace: Sep 4 10:16:59 uriel kernel: [32571790.564705] [<c1092a4d>] ? __alloc_pages_nodemask+0x476/0x4e0 Sep 4 10:16:59 uriel kernel: [32571790.564711] [<c1092ac3>] ? __get_free_pages+0xc/0x17 Sep 4 10:16:59 uriel kernel: [32571790.564716] [<c10b632e>] ? __kmalloc+0x30/0x128 Sep 4 10:16:59 uriel kernel: [32571790.564722] [<c11dd774>] ? pskb_expand_head+0x4f/0x157 Sep 4 10:16:59 uriel kernel: [32571790.564727] [<c11ddbbf>] ? __pskb_pull_tail+0x41/0x1fb Sep 4 10:16:59 uriel kernel: [32571790.564732] [<c11e4882>] ? dev_queue_xmit+0xe4/0x38e Sep 4 10:16:59 uriel kernel: [32571790.564738] [<c1205902>] ? ip_finish_output+0x0/0x5c Sep 4 10:16:59 uriel kernel: [32571790.564742] [<c12058c7>] ? ip_finish_output2+0x187/0x1c2 Sep 4 10:16:59 uriel kernel: [32571790.564747] [<c1204dc8>] ? ip_local_out+0x15/0x17 Sep 4 10:16:59 uriel kernel: [32571790.564751] [<c12055a9>] ? ip_queue_xmit+0x31e/0x379 Sep 4 10:16:59 uriel kernel: [32571790.564758] [<c1279a90>] ? _spin_lock_bh+0x8/0x1e Sep 4 10:16:59 uriel kernel: [32571790.564767] [<eda15a8d>] ? __nf_ct_refresh_acct+0x66/0xa4 [nf_conntrack] Sep 4 10:16:59 uriel kernel: [32571790.564773] [<c103bf42>] ? _local_bh_enable_ip+0x16/0x6e Sep 4 10:16:59 uriel kernel: [32571790.564779] [<c1214593>] ? tcp_transmit_skb+0x595/0x5cc Sep 4 10:16:59 uriel kernel: [32571790.564785] [<c1005c4f>] ? xen_restore_fl_direct_end+0x0/0x1 Sep 4 10:16:59 uriel kernel: [32571790.564791] [<c12165ea>] ? tcp_write_xmit+0x7a3/0x874 Sep 4 10:16:59 uriel kernel: [32571790.564796] [<c121203a>] ? tcp_ack+0x1611/0x1802 Sep 4 10:16:59 uriel kernel: [32571790.564801] [<c10055ec>] ? xen_force_evtchn_callback+0xc/0x10 Sep 4 10:16:59 uriel kernel: [32571790.564806] [<c121392f>] ? tcp_established_options+0x1d/0x8b Sep 4 10:16:59 uriel kernel: [32571790.564811] [<c1213be4>] ? tcp_current_mss+0x38/0x53 Sep 4 10:16:59 uriel kernel: [32571790.564816] [<c1216701>] ? __tcp_push_pending_frames+0x1e/0x50 Sep 4 10:16:59 uriel kernel: [32571790.564821] [<c1212246>] ? tcp_data_snd_check+0x1b/0xd2 Sep 4 10:16:59 uriel kernel: [32571790.564825] [<c1212de3>] ? tcp_rcv_established+0x5d0/0x626 Sep 4 10:16:59 uriel kernel: [32571790.564831] [<c121902c>] ? tcp_v4_do_rcv+0x15f/0x2cf Sep 4 10:16:59 uriel kernel: [32571790.564835] [<c1219561>] ? tcp_v4_rcv+0x3c5/0x5c0 Sep 4 10:16:59 uriel kernel: [32571790.564841] [<c120197e>] ? ip_local_deliver_finish+0x10c/0x18c Sep 4 10:16:59 uriel kernel: [32571790.564846] [<c12015a4>] ? ip_rcv_finish+0x2c4/0x2d8 Sep 4 10:16:59 uriel kernel: [32571790.564852] [<c11e3b71>] ? netif_receive_skb+0x3bb/0x3d6 Sep 4 10:16:59 uriel kernel: [32571790.564864] [<ed823efc>] ? xennet_poll+0x9b8/0xafc [xen_netfront] Sep 4 10:16:59 uriel kernel: [32571790.564869] [<c11e40ee>] ? net_rx_action+0x96/0x194 Sep 4 10:16:59 uriel kernel: [32571790.564874] [<c103bd4c>] ? __do_softirq+0xaa/0x151 Sep 4 10:16:59 uriel kernel: [32571790.564878] [<c103be24>] ? do_softirq+0x31/0x3c Sep 4 10:16:59 uriel kernel: [32571790.564883] [<c103befa>] ? irq_exit+0x26/0x58 Sep 4 10:16:59 uriel kernel: [32571790.564890] [<c118ff9f>] ? xen_evtchn_do_upcall+0x12c/0x13e Sep 4 10:16:59 uriel kernel: [32571790.564896] [<c1008c3f>] ? xen_do_upcall+0x7/0xc Sep 4 10:16:59 uriel kernel: [32571790.564899] Mem-Info: Sep 4 10:16:59 uriel kernel: [32571790.564902] DMA per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564905] CPU 0: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564908] CPU 1: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564911] CPU 2: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564914] CPU 3: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564916] Normal per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564919] CPU 0: hi: 186, btch: 31 usd: 175 Sep 4 10:16:59 uriel kernel: [32571790.564922] CPU 1: hi: 186, btch: 31 usd: 165 Sep 4 10:16:59 uriel kernel: [32571790.564925] CPU 2: hi: 186, btch: 31 usd: 30 Sep 4 10:16:59 uriel kernel: [32571790.564928] CPU 3: hi: 186, btch: 31 usd: 140 Sep 4 10:16:59 uriel kernel: [32571790.564931] HighMem per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564933] CPU 0: hi: 186, btch: 31 usd: 159 Sep 4 10:16:59 uriel kernel: [32571790.564936] CPU 1: hi: 186, btch: 31 usd: 22 Sep 4 10:16:59 uriel kernel: [32571790.564939] CPU 2: hi: 186, btch: 31 usd: 24 Sep 4 10:16:59 uriel kernel: [32571790.564942] CPU 3: hi: 186, btch: 31 usd: 13 Sep 4 10:16:59 uriel kernel: [32571790.564947] active_anon:485974 inactive_anon:121138 isolated_anon:0 Sep 4 10:16:59 uriel kernel: [32571790.564948] active_file:75215 inactive_file:79510 isolated_file:0 Sep 4 10:16:59 uriel kernel: [32571790.564949] unevictable:0 dirty:516 writeback:15 unstable:0 Sep 4 10:16:59 uriel kernel: [32571790.564950] free:230770 slab_reclaimable:36661 slab_unreclaimable:21249 Sep 4 10:16:59 uriel kernel: [32571790.564952] mapped:20016 shmem:29450 pagetables:5600 bounce:0 Sep 4 10:16:59 uriel kernel: [32571790.564958] DMA free:2884kB min:72kB low:88kB high:108kB active_anon:0kB inactive_anon:0kB active_file:5692kB inactive_file:724kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15872kB mlocked:0kB dirty:8kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:5112kB slab_unreclaimable:156kB kernel_stack:56kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.564964] lowmem_reserve[]: 0 698 4143 4143 Sep 4 10:16:59 uriel kernel: [32571790.564977] Normal free:143468kB min:3344kB low:4180kB high:5016kB active_anon:56kB inactive_anon:2068kB active_file:131812kB inactive_file:131728kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:715256kB mlocked:0kB dirty:156kB writeback:0kB mapped:308kB shmem:4kB slab_reclaimable:141532kB slab_unreclaimable:84840kB kernel_stack:1928kB pagetables:22400kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.564983] lowmem_reserve[]: 0 0 27559 27559 Sep 4 10:16:59 uriel kernel: [32571790.564995] HighMem free:776728kB min:512kB low:4636kB high:8760kB active_anon:1943840kB inactive_anon:482484kB active_file:163356kB inactive_file:185588kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3527556kB mlocked:0kB dirty:1900kB writeback:60kB mapped:79756kB shmem:117796kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.565001] lowmem_reserve[]: 0 0 0 0 Sep 4 10:16:59 uriel kernel: [32571790.565011] DMA: 385*4kB 16*8kB 3*16kB 9*32kB 6*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2900kB Sep 4 10:16:59 uriel kernel: [32571790.565032] Normal: 21505*4kB 6508*8kB 273*16kB 24*32kB 3*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 143412kB Sep 4 10:16:59 uriel kernel: [32571790.565054] HighMem: 949*4kB 8859*8kB 7063*16kB 6186*32kB 4631*64kB 727*128kB 6*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 776604kB Sep 4 10:16:59 uriel kernel: [32571790.565076] 198980 total pagecache pages Sep 4 10:16:59 uriel kernel: [32571790.565079] 14850 pages in swap cache Sep 4 10:16:59 uriel kernel: [32571790.565082] Swap cache stats: add 2556273, delete 2541423, find 82961339/83153719 Sep 4 10:16:59 uriel kernel: [32571790.565085] Free swap = 250592kB Sep 4 10:16:59 uriel kernel: [32571790.565087] Total swap = 385520kB Sep 4 10:16:59 uriel kernel: [32571790.575454] 1073152 pages RAM Sep 4 10:16:59 uriel kernel: [32571790.575458] 888834 pages HighMem Sep 4 10:16:59 uriel kernel: [32571790.575461] 11344 pages reserved Sep 4 10:16:59 uriel kernel: [32571790.575463] 1090481 pages shared Sep 4 10:16:59 uriel kernel: [32571790.575465] 737188 pages non-shared Now, I've no idea what this means. There's plenty of free memory; total used free shared buffers cached Mem: 4247232 3455904 791328 0 5348 736412 -/+ buffers/cache: 2714144 1533088 Swap: 385520 131004 254516 Though now I see the swap is relatively low in size, but would that matter? I've been starting to think about fragmentation, or inode usage on that large partition, but a recent fsck on it showed is as only like 0.5% fragmented. Which leaves me with inode usage, but how much of an effect really would a large inode table or filesystem TOC have? I've love to hear people's opinions on this. It's driving me potty! df -h output; Filesystem Size Used Avail Use% Mounted on /dev/xvda1 9.5G 6.6G 2.4G 74% / tmpfs 2.1G 0 2.1G 0% /lib/init/rw udev 10M 520K 9.5M 6% /dev tmpfs 2.1G 0 2.1G 0% /dev/shm /dev/xvdb 980G 921G 59G 94% /data

  Read the article

• What's the best way to clone multiple PCs from one machine?

  - by Jason T.

  Where I work we have dozens and dozens of old ThinkPad laptops. A lot of these can be reused but not for our needs. They have been long since replaced. The higher-ups have decided to donate them to charity. For better or for worse I have been tasked with reimaging them. I took a laptop and installed the factory copy of Windows, updated it, configured it appropriately. Now I'm trying to reimage it to dozens of other laptops. What's some good software to do this? First I used clonezilla to clone the hdd in the laptop to an internal drive in an external enclosure and it worked. Then I tried taking the base image out and connecting it externally to a laptop that needed to be imaged and I got it to work a few times. So far so good, right? Well once I informed my boss of my findings and what I would want to do then the images started to not work on new laptops. One of three things would happen: The Thinkpads would just blink at me and Windows wouldn't load. Or Windows would load but freeze within two minutes. Last but not least the laptops would BSOD during the Windows XP bootup. These laptops are not going to be used by the company. They're going to charity. So can anyone else recommend a way to reimage multiple laptops?

  Read the article

• Missing drive space in Server 2003

  - by Tim Brigham

  I have two drives used for SQL backups which for the last week have been acting strange - the free space indicated by windows is far off from what windirstat, etc indicates. There should only be about 60 GB of drive space used and there is about 160. This would match the utilization if the two last backup files were still residing on disk. SQL server is 2000, OS Server 2003 x64. Running on a VMware 5.0 cluster. OSSEC and McAfee for this system shows clean. My current plan is to temporarily attach one of these drives this drive to another VM for analysis. Is there anything more I should be looking at? There were a lot of pages on the net when I was looking for documentation on this issue but I haven't found this case described. EDIT: Unfortunately even a full reboot did not clear this behavior. I also used process explorer to look for open file handles. No dice.

  Read the article

• Linux RAID: Replacing Failed Drive...permanantly

  - by user137519

  Okay, odd question here. I have a server with RAID 5. A drive failed, in a really physically in a really odd way. On the machine it boots and is seen by the BIOS but...no partition can be seen on the drive consistantly (in and out). 2 out of 3 drives working...I made new spare disk and added it, RAID 5 rebuilt clean. All appears well but...when I reboot it keeps trying to use the 2nd drive which doesn't give any partition data, so of course the RAID 5 gets 2 out of 3...again. The status of my drive is as follows: /dev/sda2:Good /dev/sdb2 (drive has physical problem so no partition data) bad, /dev/sdc2:good /dev/sdd2:good. Every time I reboot the mdadm system seems to keep trying to use /dev/sdb which has physical failure (although spins and is detected). /dev/sdd is the new drive I created. I added /dev/sdd to the raid and it rebuilds the raid but this action isn't memorized upon reboot so it keeps listing /dev/sda and /dev/sdc but doesn't use the perfectly good /dev/sdd until I re-add manually. I've tried removing the dead drive with the mdadm tool, but as it cannot see /dev/sdb paritions it will not fail or remove it (says partition doesn't exist). the /etc/mdadm.conf was automatically made on the original OS install which only lists: DEVICE partitions MAILADDR root ARRAY /dev/md2 super-minor=2 ARRAY /dev/md0 super-minor=0 ARRAY /dev/md1 super-minor=1 Basically just the raids to use on boot. I need to remove this semi-dead drive (/dev/sdb) but I'd prefer to know why this is happening before I do. any ideas or suggestions. I supposed I could attempt to clone/replace /dev/sdb (the partitions on drive show up, then disappear shortly after) but given the partition "chester cat" behaviour this seems risky to me and as I have a working "spare" it seems unnecessary. Thanks in advance for your insight.

  Read the article

• Best solution top keep data secure

  - by mrwooster

  What is the simplest and most elegant way of storing a small amount of data in a reasonably secure way? I am not looking for ridiculous levels of advanced encryption (AES-256 is more than enough) and I am only looking to encrypt a small number of files. The files I wish to encrypt are mostly comprised of password lists and SSH keys for servers. Unfortunately it is impossible to keep track of ever changing passwords for my servers (and SSH keys) and so need to keep a list of the passwords. Obviously this list needs to be secure, and also portable (I work from multiple locations). At the moment, I use a 10MB encrypted disk image on my mac (std .dmg AES-256) and just mount it whenever I need access to the data. To my knowledge this is very secure and I am very happy using it. However, the data is not very portable. I would like to be able to access my data from other machines (especially ones running linux), and I am aware that there are quite a few issues trying to mount an encrypted .dmg on linux. An alternative I have considered is to create a tar archive containing the files and use gpg --symmetric to encrypt it, but this is not a very elegant solution as it requires gpg to be installed on every system. So, what over solutions exist, and which ones would you consider to be the most elegant? Ty

  Read the article

• FDE / SSD - partition and leave some unencrypted?

  - by Web Design Hero

  Just bought a used beast of a desktop pc. The system drive is setup as a Raid 0 SSD (Intel 510 SSD Drives) with 128 each. I will probably not have to many programs beyond office and maybe Adobe CS if I spring for it, I will be keeping big data on a regular hdd. My question is about setting up TrueCrypt with my configuration. I have not previously done full disk encryption, but I feel that its probably a good idea. I have done some speed tests using file containers on the hdd and the sdd with truecrypt. While there is a huge hit with the SSDs and Truecrypt, it still outperforms the hdd on its own by a good margin, so I think i will be okay for my needs with truecrypt. I have seen in a few places that they recommend partitioning the drive and leavign some of the SSD not inside truecrypt, does this really make a difference? If so, how much should I leave? Will there be any issue in the Raid0 configuration? I am not really concerned about all the wear leveling issue, rather loose data and be secure, but since I don't need all that space neccesarily, I would like to optimize my setup for security and speed.

  Read the article

• How to access files on a USB-connected NTFS disk removed from a Win7 notebook?

  - by yosh m

  My daughter seems to have fried her motherboard in her Lenovo Notebook. The disk seems to be fine. I removed the disk and used a universal disk-to-USB kit to attach it to another computer. The disk is recognized fine and I can peruse it in Windows Explorer. The problem is that the files she would like to recover from it are located in places that Windows refuses to let me access. When I try, for example, to enter the directory "Documents and Settings" it gives me an "Access is denied" error. Same thing when I try to go into the various User directories and other locations. I thought to try creating a Ghost image & retrieve the files from that, but Ghost seems to croak when I try to run it - apparently it doesn't like accessing the disk via a USB connection (even though I've told it to install the drivers for USB). Any other ideas about how to get to the files I need, either through Windows or perhaps some other OS that I could boot from a CD that can read an NTFS disk? Thanks, Yosh

  Read the article

• ABCpdf7 Not Rendering Images using AddImageUrl

  - by ddango

  Fairly exotic it seems to me. We recently upgraded/migrated from Windows Server 2003 to 2008, and now it seems that images cannot be rendered when using Doc.AddImageUrl(). (when the pdf is saved, the images appear at the correct dimensions, but the IE8 missing image x shows up). If I understand correctly, ABCpdf uses IE rendering internally for this sort of thing. We thought it might be a permission issue, but we've check IE ESC and that seems to be configured as they suggest. Has anyone else run into a similar problem? Perhaps a code configuration is needed? Not the entire snippet, but the ABCpdf7 stuff: using (Doc doc = new Doc()) { doc.HtmlOptions.PageCacheEnabled = false; doc.HtmlOptions.UseNoCache = true; doc.HtmlOptions.PageCacheClear(); doc.HtmlOptions.PageCachePurge(); doc.HtmlOptions.UseResync = true; doc.HtmlOptions.ImageQuality = 25; int pageID = doc.AddImageUrl(url + "&guid=" + url.GetHashCode()); while (true) { if (!doc.Chainable(pageID)) break; doc.Page = doc.AddPage(); pageID = doc.AddImageToChain(pageID); } // file saving etc. }

  Read the article

• displaying images in a list box so the image resizes based on parent container

  - by MikeU

  I have an expander with a list box in it that displays image thumbnails. I want the images to be sized according to the size of the listbox and the list box to be sized based on the width of the expander. When I expand the expander I want the list box and the images to resize also. Does anyone know how I can accomplish this? <Expander Style="{DynamicResource ExpanderStyle}" Name="pictureExpander" IsExpanded="True" ExpandDirection="Left" Collapsed="pictureExpander_Collapsed" Expanded="pictureExpander_Expanded" Grid.Column="4"> <ListBox Name="photoList" ItemsSource="{Binding Source={StaticResource PhotoBin}}" IsSynchronizedWithCurrentItem="True" HorizontalAlignment="Stretch" ScrollViewer.CanContentScroll="False"> <ListBox.ItemContainerStyle> <Style TargetType="{x:Type ListBoxItem}"> <Style.Resources> <SolidColorBrush x:Key="{x:Static SystemColors.HighlightBrushKey}" Color="Yellow" /> </Style.Resources> <Style.Triggers> <Trigger Property="IsSelected" Value="True"> <Setter Property="BorderBrush" Value="Black"/> <Setter Property="BorderThickness" Value="5"/> </Trigger> </Style.Triggers> </Style> </ListBox.ItemContainerStyle> <ListBox.ItemTemplate> <DataTemplate> <Image Source="{Binding FileLocation}" Margin="0,5" HorizontalAlignment="Stretch" MouseLeftButtonDown="DragImage" /> </DataTemplate> </ListBox.ItemTemplate> </ListBox> </Expander>

  Read the article

• Problem creating a mosaic of images using JAI

  - by IanW

  Hello I'm trying to use JAI to create a single mosaic consisting of 4 TIF images each of which is 5000 x 5000. The code I have written is as follows .. RenderedOp mosaic=null; ParameterBlock pbMosaic=new ParameterBlock(); pbMosaic.add(MosaicDescriptor.MOSAIC_TYPE_OVERLAY); RenderedOp in=null; // Get 4 tiles and add them to the Mosaic in=returnRenderedOp(path,"northwest.tif"); pbMosaic.addSource(in); in=returnRenderedOp(path,"northeast.tif"); pbMosaic.addSource(in); in=returnRenderedOp(path,"southwest.tif"); pbMosaic.addSource(in); in=returnRenderedOp(path,"southeast.tif"); pbMosaic.addSource(in); // Setup the ImageLayout ImageLayout imageLayout=new ImageLayout(0,0,10000,10000); imageLayout.setTileWidth(5000); imageLayout.setTileHeight(5000); imageLayout.setColorModel(in.getColorModel()); imageLayout.setSampleModel(in.getSampleModel()); mosaic=JAI.create("mosaic",pbMosaic,new RenderingHints(JAI.KEY_IMAGE_LAYOUT,imageLayout)); The problem is that all 4 images are being positioned in the same place in the top left hand corner of the mosaic so the other three quarters of it is empty. Can anyone tell me how I can choose the position of each picture that makes up the mosaic so each appears in the correct place ? Thanks Ian

  Read the article

• Jquery Flexslider - can't see navigational images (manualControl)

  - by Kim Thomas

  I've spent a lot of time looking at the post on 3/13/12 re: manual controls, but isn't getting me all the way there...probably because I don't know jquery. Sorry, newbie on board. I'm trying to get the right/left arrows to show, as well as the 1, 2, 3...at the bottom. They are there, I see the lists on Firebug, just don't know how to add them to the "hook" (?) so they appear. Here is the code I have in header: <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js" type="text/javascript"></script> <script src="jquery.flexslider.js"></script> <script type="text/javascript" charset="utf-8"> $(window).load(function() { $('.flexslider').flexslider({ animation: "slide", slideshow: false, controlNav: true, manualControls: ".flex-control-nav li a", controlsContainer: ".flex-container" }); }); </script> Here is my html: <div class="flex-container"> <div class="flexslider"> <ul class="slides"> <li><img src="images/tah_home.jpg" alt="taylor art house home page" width="600" height="320"/> <p class="flex-caption">Taylor Art House Home Page</p></li> <li><img src="images/tah_blog.jpg" alt="taylor art house blog page" width="600" height="320" /> <p class="flex-caption">We created a blog that fits seemlessly into Taylor Art House's look</p></li> <li><img src="images/tah_artwork_page.jpg" alt="taylor art house art page" width="600" height="320" /> <p class="flex-caption">One of Taylor Art House's gallery pages, using a Wordpress plugin</p></li> <li><img src="images/tah_arch_portfolio.jpg" alt="jon taylor architecture portfolio page" width="600" height="320" /> <p class="flex-caption">We created links to toggle from TAH to Jon Taylor Architecture</p></li> </ul> </div><!--end flexsider--> </div><!--end flex-container--> Here is the Flexslider CSS: /* * jQuery FlexSlider v1.8 * http://www.woothemes.com/flexslider/ * * Copyright 2012 WooThemes * Free to use under the MIT license. * http://www.opensource.org/licenses/mit-license.php */ /* Browser Resets */ .flex-container a:active, .flexslider a:active, .flex-container a:focus, .flexslider a:focus {outline: none;} .slides, .flex-control-nav, .flex-direction-nav {margin: 0; padding: 0; list-style: none;} /* FlexSlider Necessary Styles *********************************/ .flexslider { width: 100%; margin: 0; padding: 0; } .flexslider .slides > li { display: none; -webkit-backface-visibility: hidden; } /* Hide the slides before the JS is loaded. Avoids image jumping */ .flexslider .slides img { max-width: 100%; display: block; } .flex-pauseplay span { text-transform: capitalize; } /* Clearfix for the .slides element */ .slides:after { content: "."; display: block; clear: both; visibility: hidden; line-height: 0; height: 0; } html[xmlns] .slides { display: block; } * html .slides { height: 1%; } /* No JavaScript Fallback */ /* If you are not using another script, such as Modernizr, make sure you * include js that eliminates this class on page load */ .no-js .slides > li:first-child { display: block; } /* FlexSlider Default Theme *********************************/ .flexslider { width: 600px; background: #fff; border: 4px solid #999; position: relative; margin: 30px 0; -webkit-border-radius: 5px; -moz-border-radius: 5px; -o-border-radius: 5px; border-radius: 5px; zoom: 1; } .flexslider .slides { zoom: 1; } .flexslider .slides > li { position: relative; } /* Suggested container for "Slide" animation setups. Can replace this with your own, if you wish */ .flex-container { zoom: 1; position: relative; margin-left:100px; } /* Caption style */ /* IE rgba() hack */ .flex-caption { background:none; -ms-filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#4C000000,endColorstr=#4C000000); filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#4C000000,endColorstr=#4C000000); zoom: 1; } .flex-caption { width: 96%; padding: 2%; margin: 0; position: absolute; left: 0; bottom: 0; background: rgba(0,0,0,.3); color: #fff; text-shadow: 0 -1px 0 rgba(0,0,0,.3); font-size: 14px; line-height: 18px; } /* Direction Nav */ .flex-direction-nav { height: 0; } .flex-direction-nav li a { width: 52px; height: 52px; margin: -13px 0 0; display: block; background: url(theme/bg_direction_nav.png) no-repeat; position: absolute; top: 50%; cursor: pointer; text-indent: -999em; } .flex-direction-nav li .next { background-position: -52px 0; right: -21px; } .flex-direction-nav li .prev { left: -20px; } .flex-direction-nav li .disabled { opacity: .3; filter:alpha(opacity=30); cursor: default; } /* Control Nav */ .flex-control-nav { width: 100%; position: absolute; bottom: -30px; text-align: center; } .flex-control-nav li { margin: 0 0 0 5px; display: inline-block; zoom: 1; *display: inline; } .flex-control-nav li:first-child { margin: 0; } .flex-control-nav li a { width: 13px; height: 13px; display: block; background: url(theme/bg_control_nav.png) no-repeat; cursor: pointer; text-indent: -999em; } .flex-control-nav li a:hover { background-position: 0 -13px; } .flex-control-nav li a.active { background-position: 0 -26px; cursor: default; } Here is how it appears in Firebug: <div class="flex-container"> <div class="flexslider" style="overflow: hidden;"> <ul class="slides" style="width: 1200%; margin-left: -1800px;"> <li class="clone" style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li class="clone" style="width: 600px; float: left; display: block;"> </ul> </div> <ol class="flex-control-nav"> <li> <a class="">1</a> </li> <li> <li> <li> </ol> <ul class="flex-direction-nav"> <li> <a class="prev" href="#">Previous</a> </li> <li> <a class="next" href="#">Next</a> </li> </ul> </div> Finally, here is a link to the jsFiddle file (I saw someone wanted that in other flexslider post): http://jsfiddle.net/kthms/Wxmsp/ Link to page: http://www.kajortdesigns.com/tah.php I've tried every combo of class from the CSS in the manualControl: "", but I'm just guessing. If anyone can help this newbie out, I would be very appreciative. Explicit instructions are always appreciated.

  Read the article

• Extracting images from a PDF

  - by sagar

  My Query I want to extract only images from a PDF document, using Objective-C in an iPhone Application. My Efforts I have gone through the info on this link, which has details regarding different operators on PDF documents. I also studied this document from Apple about PDF parsing with Quartz. I also went through the entire PDF reference document from the Adobe site. According to that document, for each image there are the following operators: q Q BI EI I have created a table to get the image: myTable = CGPDFOperatorTableCreate(); CGPDFOperatorTableSetCallback(myTable, "q", arrayCallback2); CGPDFOperatorTableSetCallback(myTable, "TJ", arrayCallback); CGPDFOperatorTableSetCallback(myTable, "Tj", stringCallback); I use this method to get the image: void arrayCallback2(CGPDFScannerRef inScanner, void *userInfo) { // THIS DOESN'T WORK // CGPDFStreamRef stream; // represents a sequence of bytes // if (CGPDFDictionaryGetStream (d, "BI", &stream)){ // CGPDFDataFormat t=CGPDFDataFormatJPEG2000; // CFDataRef data = CGPDFStreamCopyData (stream, &t); // } } This method is called for the operator "q", but I don't know how to extract an image from it. What should be the solution for extracting the images from the PDF documents? Thanks in advance for your kind help.

  Read the article

• Best Practice for Uploading Many (2000+) Images to A Server

  - by bob

  Hello, I have a general question about this. When you have a gallery, sometimes people need to upload 1000's of images at once. Most likely, it would be done through a .zip file. What is the best way to go about uploading this sort of thing to a server. Many times, server have timeouts etc. that need to be accounted for. I am wondering what kinds of things should I be looking out for and what is the best way to handle a large amount of images being uploaded. I'm guessing that you would allow a user to upload a zip file (assuming the timeout does not effect you), and this zip file is uploaded to a specific directory, lets assume in this case a directory is created for each user in the system. You would then unzip the directory on the server and scan the user's folder for any directories containing .jpg or .png or .gif files (etc.) and then import them into a table accordingly. I'm guessing labeled by folder name. What kind of server side troubles could I run into? I'm aware that there may be many issues. Even general ideas would be could so I can then research further. Thanks! Also, I would be programming in Ruby on Rails but I think this question applies accross any language.

  Read the article

• Images not uploading when htmlentities has 'UTF-8' set

  - by gaoshan88

  I have a form that, among other things, accepts an image for upload and sticks it in the database. Previously I had a function filtering the POSTed data that was basically: function processInput($stuff) { $formdata = $stuff; $formdata = htmlentities($formdata, ENT_QUOTES); return "'" . mysql_real_escape_string(stripslashes($formdata)) . "'"; } When, in an effort to fix some weird entities that weren't getting converted properly I changed the function to (all that has changed is I added that 'UTF-8' bit in htmlentities): function processInput($stuff) { $formdata = $stuff; $formdata = htmlentities($formdata, ENT_QUOTES, 'UTF-8'); //added UTF-8 return "'" . mysql_real_escape_string(stripslashes($formdata)) . "'"; } And now images will not upload. What would be causing this? Simply removing the 'UTF-8' bit allows images to upload properly but then some of the MS Word entities that users put into the system show up as gibberish. What is going on?

  Read the article

• Java: Reading images and displaying as an ImageIcon

  - by 11helen

  I'm writing an application which reads and displays images as ImageIcons (within a JLabel), the application needs to be able to support jpegs and bitmaps. For jpegs I find that passing the filename directly to the ImageIcon constructor works fine (even for displaying two large jpegs), however if I use ImageIO.read to get the image and then pass the image to the ImageIcon constructor, I get an OutOfMemoryError( Java Heap Space ) when the second image is read (using the same images as before). For bitmaps, if I try to read by passing the filename to ImageIcon, nothing is displayed, however by reading the image with ImageIO.read and then using this image in the ImageIcon constructor works fine. I understand from reading other forum posts that the reason that the two methods don't work the same for the different formats is down to java's compatability issues with bitmaps, however is there a way around my problem so that I can use the same method for both bitmaps and jpegs without an OutOfMemoryError? (I would like to avoid having to increase the heap size if possible!) The OutOfMemoryError is triggered by this line: img = getFileContentsAsImage(file); and the method definition is: public static BufferedImage getFileContentsAsImage(File file) throws FileNotFoundException { BufferedImage img = null; try { ImageIO.setUseCache(false); img = ImageIO.read(file); img.flush(); } catch (IOException ex) { //log error } return img; } The stack trace is: Exception in thread "AWT-EventQueue-0" java.lang.OutOfMemoryError: Java heap space at java.awt.image.DataBufferByte.<init>(DataBufferByte.java:58) at java.awt.image.ComponentSampleModel.createDataBuffer(ComponentSampleModel.java:397) at java.awt.image.Raster.createWritableRaster(Raster.java:938) at javax.imageio.ImageTypeSpecifier.createBufferedImage(ImageTypeSpecifier.java:1056) at javax.imageio.ImageReader.getDestination(ImageReader.java:2879) at com.sun.imageio.plugins.jpeg.JPEGImageReader.readInternal(JPEGImageReader.java:925) at com.sun.imageio.plugins.jpeg.JPEGImageReader.read(JPEGImageReader.java:897) at javax.imageio.ImageIO.read(ImageIO.java:1422) at javax.imageio.ImageIO.read(ImageIO.java:1282) at framework.FileUtils.getFileContentsAsImage(FileUtils.java:33)

  Read the article

• How to MakeTable ReadOnly including contents like images

  - by GustlyWind

  I have a table which has two text boxes and a image beside it to click and open a popup. In read-only mode based on condition I am able to make text boxes read-only but images are not becoming read-only.One solution I had is the anchor tag associated with image calls for JavaScript where I can check for a dummy click when it is in read-only mode. The problem here is the function is common and effects everywhere. So is there a way to make the entire table read-only so that no extra workaround needs to done. Edited for code <table> <tr> <td class="lightbg" colspan='4'>&nbsp; Expires:<input type="TEXT" value="" id="element1" name="expireDate" size="10" maxlength="20" class="" onChange="javascript:validateDateEntry('element1',true);;"> Period:<input type="TEXT" value="" id="element2" name="refershDate" size="10" maxlength="20" class="" onChange="javascript:validateDateEntry('element2',true);;"> &nbsp; <a href="javascript:doCalendar('element1');"> <img src="/PWM/images/images_2006/calendarbtn.gif" border="0" alt="Click to select date from calendar" align="absmiddle"> </a> </td> </tr> <tr> <td colspan='4'><b>*</b>Times are in the WFM Server's Time Zone.</td></tr> </table> Thanks

  Read the article

• Sending series of images to display like a movie on iPhone

  - by unknownthreat

  Allow me to elaborate more. On the server, we will have a program that will take data from iPhone and process that data and produce series of images. Each time an image is generated, it will be send back to display on iPhone. I have done all of the things above using UDP, OpenGL, and such. It works. The images are transferred to iPhone and can be displayed, but it is slow. The image's resolution is around 320 x 420 and we send the image pixels by pixels. This naive implementation leads to a slow framerate. I can see around 2-3 frames per second. There are also some UDP packets dropped, and this is expected. Are there any sort of compression method available for something like this? Are there any other method that can make this better? NOTE: please don't just write "compression" as an answer, because we are aware that we will need to do it in some ways.

  Read the article

• android & libgdx - disable blurry images rendering

  - by android developer

  i'm trying out libgdx as an opengl wrapper , and i have some issues with its graphical rendering : for some reason , all images (textures) on android device look a little blurred using libgdx . this also includes text (font) . however, for normal images , even though i show the entire image , i expect it to look as sharp as i see it on a computer , especially if i have such a good screen on the device (it's galaxy nexus) . i've tried to set the anti-aliasing off , by using the next code : final AndroidApplicationConfiguration androidApplicationConfiguration=new AndroidApplicationConfiguration(); androidApplicationConfiguration.numSamples=0; //tried the value of 1 too. ... i've also tried to set the scaling method to various methods , but with no luck. example: texture.setFilter(TextureFilter.Nearest,TextureFilter.Nearest); as a test , i've found a sharp image that is exactly the same as the seen resolution on the device (720x1184 for galaxy nexus , because of the buttons bar) , and i've put it to be on the background of the libgdx app . of course , i had to add extra blank space in order for the texute to be loaded , so the final size of the image (which will include content and empty space) is still a power of 2 for both width and height (1024x2048 in my case) . on the desktop app , it look ok . on the device , it looked blurred. a weird thing that i've noticed is that when i change the device's orientation (horizontal <= vertical) , for the very short time before the rotating animation starts , i see both the image and the text very well . can anyone please help me?

  Read the article

• jQuery ajax not preloading images

  - by George Wiscombe

  I have a list of galleries, when you click on the title of a gallery it pulls in the contents (HTML with images). When the content is pulled in it preloads the html but not the images, any ideas? This is the JavaScript i'm using: $('#ajax-load').ajaxStart(function() { $(this).show(); }).ajaxStop(function() { $(this).hide();}); // PORTFOLIO SECTION // Hide project details on load $('.project > .details').hide(); // Slide details up / down on click $('.ajax > .header').click(function () { if ($(this).siblings(".details").is(":hidden")) { var detailUrl = $(this).find("a").attr("href"); var $details = $(this).siblings(".details"); $.ajax({ url: detailUrl, data: "", type: "GET", success: function(data) { $details.empty(); $details.html(data); $details.find("ul.project-nav").tabs($details.find(".pane"), {effect: 'fade'}); $details.slideDown("slow"); }}); } else {$(this).siblings(".details").slideUp();} return false; }); You can see this demonstrated at http://www.georgewiscombe.com Thanks in advance!

  Read the article

• Error Converting PIL B&W images to Numpy Arrays

  - by Elliot

  I am getting weird errors when I try to convert a black and white PIL image to a numpy array. An example of the code I am working with is below. if image.mode != '1': image = image.convert('1') #convert to B&W data = np.array(image) #convert data to a numpy array n_lines = data.shape[0] #number of raster passes line_range = range(data.shape[1]) for l in range(n_lines): # process one horizontal line of the image line = data[l] for n in line_range: if line[n] == 1: write_line_to(xl, z+scale*n, speed) #conversion to other program code elif line[n] == 0: run_to(xl, z+scale*n) #conversion to other program code I have tried this using both array and asarray for the conversion, and gotten different errors. If I use array, then the data I get out is nothing like what I put in. It looks like several very shrunken partial images side by side, with the remainder of the image space filled in in black. If I use asarray, then the entirety of python crashes during the raster step (on a random line). If I work with a greyscale image ('L'), then neither of these errors occurs for either array or asarray. Does anyone know what I am doing wrong? Is there something odd about the way PIL encodes B&W images, or something special I need to pass numpy to make it convert properly?

  Read the article

• jQuery Ajax load images problem

  - by jackysee

  I have a code that would call $.load() to get an HTML fragment. In the fragment there will be a list of images and a script that would do some calculation based on the list size. The fragment looks like <div> <ul> <li><img .../></li> <li><img .../></li> ... </ul> </div> <script> //... script to do calculation on the list width </script> Originally, I use css's max-width to ensure that the image would not exceed 180px. But as IE has no max-width, I use the expression hack. However, it seems when the image are first load, the script cannot get a correct width of image list. Seems like the script load earlier than the CSS expression. If it is a new page, I can certainly call $(window).load() to ensure all the images are loaded. But what can I do in an ajax html fragment request?

  Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >