Search Results

Search found 2732 results on 110 pages for 'shailesh ios'.

Page 106/110 | < Previous Page | 102 103 104 105 106 107 108 109 110  | Next Page >

  • Can Microsoft Build Appliances?

    - by andrewbrust
    Billy Hollis, my Visual Studio Live! colleague and fellow Microsoft Regional Director said recently, and I am paraphrasing, that the computing world, especially on the consumer side, has shifted from one of building hardware and software that makes things possible to do, to building products and technologies that make things easy to do.  Billy crystalized things perfectly, as he often does. In this new world of “easy to do,” Apple has done very well and Microsoft has struggled.  In the old world, customers wanted a Swiss Army Knife, with the most gimmicks and gadgets possible.  In the new world, people want elegantly cutlery.  They may want cake cutters and utility knives too, but they don’t want one device that works for all three tasks.  People don’t want tools, they want utensils.  People don’t want machines.  They want appliances. Microsoft Appliances: They Do Exist Microsoft has built a few appliance-like devices.  I would say XBox 360 is an appliance,  It’s versatile, mind you, but it’s the kind of thing you plug in, turn on and use, as opposed to set-up, tune, and open up to upgrade the internals.  Windows Phone 7 is an appliance too.  It’s a true smartphone, unlike Windows Mobile which was a handheld computer with a radio stack.  Zune is an appliance too, and a nice one.  It hasn’t attained much traction in the market, but that’s probably because the seminal consumer computing appliance -- the iPod – got there so much more quickly. In the embedded world, Mediaroom, Microsoft’s set-top product for the cable industry (used by AT&T U-Verse and others) is an appliance.  So is Microsoft’s Sync technology, used in Ford automobiles.  Even on the enterprise side, Microsoft has an appliance: SQL Server Parallel Data Warehouse Edition (PDW) combines Microsoft software with select OEMs’ server, networking and storage hardware.  You buy the appliance units from the OEMs, plug them in, connect them and go. I would even say that Bing is an appliance.  Not in the hardware sense, mind you.  But from the software perspective, it’s a single-purpose product that you visit or run, use and then move on.  You don’t have to install it (except the iOS and Android native apps where it’s pretty straightforward), you don’t have to customize it, you don’t have to program it.  Basically, you just use it. Microsoft Appliances that Should Exist But Microsoft builds a bunch of things that are not appliances.  Media Center is not an appliance, and it most certainly should be.  Instead, it’s an app that runs on Windows 7.  It runs full-screen and you can use this configuration to conceal the fact that Windows is under it, but eventually something will cause you to abandon that masquerade (like Patch Tuesday). The next version of Windows Home Server won’t, in my opinion, be an appliance either.  Now that the Drive Extender technology is gone, and users can’t just add and remove drives into and from a single storage pool, the product is much more like a IT server and less like an appliance-premised one.  Much has been written about this decision by Microsoft.  I’ll just sum it up in one word: pity. Microsoft doesn’t have anything remotely appliance-like in the tablet category, either.  Until it does, it likely won’t have much market share in that space either.  And of course, the bulk of Microsoft’s product catalog on the business side is geared to enterprise machines and not personal appliances. Appliance DNA: They Gotta Have It. The consumerization of IT is real, because businesspeople are consumers too.  They appreciate the fit and finish of appliances at home, and they increasingly feel entitled to have it at work too.  Secure and reliable push email in a smartphone is necessary, but it isn’t enough.  People want great apps and a pleasurable user experience too.  The full Microsoft Office product is needed at work, but a PC with a keyboard and mouse, or maybe a touch screen that uses a stylus (or requires really small fingers), to run Office isn’t enough either.  People want a flawless touch experience available for the times they want to read and take quick notes.  Until Microsoft realizes this fully and internalizes it, it will suffer defeats in the consumer market and even setbacks in the business market.  Think about how slow the Office upgrade cycle is…now imagine if the next version of Office had a first-class alternate touch UI and consider the possible acceleration in adoption rates. Can Microsoft make the appliance switch?  Can the appliance mentality become pervasive at the company?  Can Microsoft hasten its release cycles dramatically and shed the “some assembly required” paradigm upon which many of its products are based?  Let’s face it, the chances that Microsoft won’t make this transition are significant. But there are also encouraging signs, and they should not be ignored.  The appliances we have already discussed, especially Xbox, Zune and Windows Phone 7, are the most obvious in this regard.  The fact that SQL Server has an appliance SKU now is a more subtle but perhaps also more significant outcome, because that product sits so smack in the middle of Microsoft’s enterprise stack.  Bing is encouraging too, especially given its integrated travel, maps and augmented reality capabilities.  As Bing gains market share, Microsoft has tangible proof that it can transform and win, even when everyone outside the company, and many within it, would bet otherwise. That Great Big Appliance in the Sky Perhaps the most promising (and evolving) proof points toward the appliance mentality, though, are Microsoft’s cloud offerings -- Azure and BPOS/Office 365.  While the cloud does not represent a physical appliance (quite the opposite in fact) its ability to make acquisition, deployment and use of technology simple for the user is absolutely an embodiment of the appliance mentality and spirit.  Azure is primarily a platform as a service offering; it doesn’t just provide infrastructure.  SQL Azure does likewise for databases.  And Office 365 does likewise for SharePoint, Exchange and Lync. You don’t administer, tune and manage servers; instead, you create databases or site collections or mailboxes and start using them. Upgrades come automatically, and it seems like releases will come more frequently.  Fault tolerance and content distribution is just there.  No muss.  No fuss.  You use these services; you don’t have to set them up and think about them.  That’s how appliances work.  To me, these signs point out that Microsoft has the full capability of transforming itself.  But there’s a lot of work ahead.  Microsoft may say they’re “all in” on the cloud, but the majority of the company is still oriented around its old products and models.  There needs to be a wholesale cultural transformation in Redmond.  It can happen, but product management, program management, the field and executive ranks must unify in the effort. So must partners, and even customers.  New leaders must rise up and Microsoft must be able to see itself as a winner.  If Microsoft does this, it could lock-in decades of new success, and be a standard business school case study for doing so.  If not, the company will have missed an opportunity, and may see its undoing.

    Read the article

  • Mobile BI Comes of Age

    - by rich.clayton(at)oracle.com
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} One of the hot topics in the Business Intelligence industry is mobility.  More specifically the question is how business can be transformed by the iPhone and the iPad.  In June 2003, Gartner predicted that Mobile BI would be obsolete and that the technology was headed for the 'trough of disillusionment'.  I agreed with them at that time.  Many vendors like MicroStrategy and Business Objects jumped into the fray attempting to show how PDA's like Palm Pilots could be integrated with BI.  Their investments resulted in interesting demos with no commercial traction.  Why, because wireless networks and mobile operating systems were primitive, immature and slow. In my opinion, Apple's iOS has changed everything in Mobile BI.  Yes Blackberry, Android and Symbian and all the rest have their place in the market but I believe that increasingly consumers (not IT departments) influence BI decision making processes.  Consumers are choosing the iPhone and the iPad. The number of iPads I see in business meetings now is staggering.  Some use it for email and note taking and others are starting to use corporate applications.  The possibilities for Mobile BI are countless and I would expect to see iPads enterprise-wide over the next few years.   These new devices will provide just-in-time access to critical business information.  Front-line managers interacting with customers, suppliers, patients or citizens will have information literally at their fingertips. I've experimented with several mobile BI tools.  They look cool but like their Executive Information System (EIS) predecessors of the 1990's these tools lack a backbone and a plausible integration strategy.  EIS was a viral technology in the early 1990's.  Executives from every industry and job function were showcasing their dashboards to fellow co-workers and colleagues at the country club.  Just like the iPad, every senior manager wanted one.  EIS wasn't a device however, it was a software application.   EIS quickly faded into the software sunset as it lacked integration with corporate information systems.  BI servers  replaced EIS because the technology focused on the heavy data lifting of integrating, normalizing, aggregating and managing large, complex data volumes.  The devices are here to stay. The cute stand-alone mobile BI tools, not so much. If all you're looking to do is put Excel files on your iPad, there are plenty of free tools on the market.  You'll look cool at your next management meeting but after a few weeks, the cool factor will fade away and you'll be wondering how you will ever maintain it.  If however you want secure, consistent, reliable information on your iPad, you need an integration strategy and a way to model the data.  BI Server technologies like the Oracle BI Foundation is a market leading approach to tackle that issue. I liken the BI mobility frenzy to buying classic cars.  Classic Cars have two buying groups - teenagers and middle-age folks looking to tinker.  Teenagers look at the pin-stripes and the paint job while middle-agers (like me)  kick the tires a bit and look under the hood to check out the quality and reliability of the engine.  Mobile BI tools sure look sexy but don't go very far without an engine and a transmission or an integration strategy. The strategic question in Mobile BI is can these startups build a motor and transmission faster than Oracle can re-paint the car?  Oracle has a great engine and a transmission that connects to all enterprise information assets.  We're working on the new paint job and are excited about the possibilities.  Just as vertical integration worked in the automotive business, it too works in the technology industry.

    Read the article

  • Communities - The importance of exchange and discussion

    Communication with your environment is an essential part of everyone's life. And it doesn't matter whether you are actually living in a rural area in the middle of nowhere, within the pulsating heart of a big city, or in my case on a wonderful island in the Indian Ocean. The ability to exchange your thoughts, your experience and your worries with another person helps you to get different points of view and new ideas on how to resolve an issue you might be confronted with. Benefits of community work What happens to be common sense in your daily life, also applies to your work environment. Working in IT, or ICT as it is called in Mauritius, requires a lot of reading and learning. Not only during your lectures at the university but with your colleagues in a project assignment and hopefully with 'unknown' pals in the universe of online communities. At least I can say that I learned quite a lot from other developers code, their responses in various forums, their numerous blog articles, and while attending local user group meetings. When I started to work as a professional software developer (or engineer some may say) years ago I immediately checked the existence of communities on the programming language, the database technology and other vital information on software development in general. Luckily, it wasn't too difficult to find. My employer had a subscription of the monthly magazines and newsletters of a national organisation which also run the biggest forum in that area. Getting in touch with other developers and reading their common problems but also solutions was a huge benefit to my growth. Image courtesy of Michael Kappel (CC BY-NC 2.0) Active participation and regular contribution to this community gave me some nice advantages, too. Within three years I was listed as a conference speaker at the annual developer's conference and provided several sessions on different topics during consecutive years. Back in 2004, I took over the responsibility and management of the monthly meetings of a regional user group, and organised it for more than two years. Furthermore, I was invited to the newly-founded community program of Microsoft Germany (Community Leader/Insider Program - CLIP). My website on Active FoxPro Pages was nominated in the second batch of online communities. Due to my community work and providing advice to others, I had the honour to be awarded as Microsoft Most Valuable Professional (MVP) - Visual Developer for Visual FoxPro in the years 2006 and 2007. It was a great experience to meet with other like-minded people and I'm really grateful for that. Just in case, more details are listed in my Curriculum Vitae. But this all changed when I moved to Mauritius... Cyber island Mauritius? During the first months in Mauritius I was way too busy to think about community activities at all. First of all, there was the new company that had to be set up, the new staff had to be trained and of course the communication work-flows and so on with the project managers back in Germany had to be sorted out, too. Second, I had to get a grip of my private matters like getting the basics for my new household or exploring the neighbourhood, and last but not least I needed a break from the hectic and intensive work prior to my departure. As soon as the sea literally calmed down, I started to have conversations with my colleagues about communities and user groups. Sadly, it turned out that there were none, or at least no one was aware of any at that time. Oh oh, what did I do? Anyway, having this kind of background and very positive experience with off-line and on-line activities I decided for myself that some day I'm going to found a community in Mauritius for all kind of IT/ICT-related fields. The main focus might be on software development but not on a certain technology or methodology. It was clear to me that it should be an open infrastructure and anyone is welcome to join, to experience, to share and to contribute if they would like to. That was the idea at that time... Ok, fast-forward to recent events. At the end of October 2012 I was invited to an event called Open Days organised by Microsoft Indian Ocean Islands together with other local partners and resellers. There I got in touch with local Technical Evangelist Arnaud Meslier and we had a good conversation on communities during the breaks. Eventually, I left a good impression on him, as we are having chats on Facebook or Skype irregularly. Well, seeing that my personal and professional surroundings have been settled and running smooth, having that great exchange and contact with Microsoft IOI (again), and being really eager to re-animate my intentions from 2007, I recently founded a new community: Mauritius Software Craftsmanship Community - #MSCC It took me a while to settle down with the name but it was obvious that the community should not be attached to one single technology, like ie. .NET user group, Oracle developers, or Joomla friends (these are fictitious names). There are several other reasons why I came up with 'Craftsmanship' as the core topic of this community. The expression of 'engineering' didn't feel right with the fields covered. Software development in all kind of facets is a craft, and therefore demands a lot of practice but also guidance from more experienced developers. It also includes the process of designing, modelling and drafting the ideas. Has to deal with various types of tests and test methodologies, and of course should be focused on flexible and agile ways of acting. In order to meet and to excel a customer's request for a solution. Next, I was looking for an easy way to handle the organisation of events and meeting appointments. Using all kind of social media platforms like Google+, LinkedIn, Facebook, Xing, etc. I was never really confident about their features of event handling. More by chance I stumbled upon Meetup.com and in combination with the other entities (G+ Communities, FB Pages or in Groups) I am looking forward to advertise and manage all future activities here: Mauritius Software Craftsmanship Community This is a community for those who care and are proud of what they do. For those developers, regardless how experienced they are, who want to improve and master their craft. This is a community for those who believe that being average is just not good enough. I know, there are not many 'craftsmen' yet but it's a start... Let's see how it looks like by the end of the year. There are free smartphone apps for Android and iOS from Meetup.com that allow you to keep track of meetings and to stay informed on latest updates. And last but not least, there will be a Trello workspace to collect and share ideas and provide downloads of slides, etc. Sharing is caring! As mentioned, the #MSCC is present in various social media networks in order to cover as many people as possible here in Mauritius. Following is an overview of the current networks: Twitter - Latest updates and quickies Google+ - Community channel Facebook - Community Page LinkedIn - Community Group Trello - Collaboration workspace to share and develop ideas Hopefully, this covers the majority of computer-related people in Mauritius. Please spread the word about the #MSCC between your colleagues, your friends and other interested 'geeks'. Your future looks bright Running and participating in a user group or any kind of community usually provides quite a number of advantages for anyone. On the one side it is very joyful for me to organise appointments and get in touch with people that might be interested to present a little demo of their projects or their recent problems they had to tackle down, and on the other side there are lots of companies that have various support programs or sponsorships especially tailored for user groups. At the moment, I already have a couple of gimmicks that I would like to hand out in small contests or raffles during one of the upcoming meetings, and as said, companies provide all kind of goodies, books free of charge, or sometimes even licenses for communities. Meeting other software developers or IT guys also opens up your point of view on the local market and there might be interesting projects or job offers available, too. A community like the Mauritius Software Craftsmanship Community is great for freelancers, self-employed, students and of course employees. Meetings will be organised on a regular basis, and I'm open to all kind of suggestions from you. Please leave a comment here in blog or join the conversations in the above mentioned social networks. Let's get this community up and running, my fellow Mauritians!

    Read the article

  • 5 Ways Android Still Disappoints (Me)

    - by TStewartDev
    Let me make this clear: I'm annoyed with Apple. I don't like their current policies and I don't like where Steve Jobs is taking the company. In general, I don't like it when any one company gets too much control in a market. When that happens, the leading company dictates the game and as consumers, our options all but disappear. That said, I'm still going to buy a new iPhone next week. My Apple-hating friends seem to desperately want me to go Android instead, but frankly, it's not good enough for me, and here are the reasons why. The Modern WinMo One of the reasons that Microsoft has identified for Windows Mobile's rapid decline is the breadth of hardware. They exercised little control over manufacturer's implementations. In theory, that sounds great. We as consumers have lots of choice. In practice, though, it meant among other things that updates to the devices were left up to the manufacturers. As a result, that rarely happened. (I'm still bitter at Toshiba for leaving me hanging back in 2002.) And now, Google is doing the same thing with Android. Case in point: my wife has a Motorola Backflip that we bought in April. It was released in March. Motorola says it will get Android 2.1 "sometime in Q3". Great. Meanwhile, I pull down the latest version of iPhone OS (now iOS) and install it the same day it's released. You may say that I can't judge Android by one lazy manufacturer. Yup, I sure can. With Apple, my original iPhone has been supported perfectly for 3 years. With Android, I will have to wait for upgrades after Google releases them, possibly indefinitely. Not cool. AT&T We signed a new contract with AT&T in April to get my wife's phone. I've had a reasonable experience with them. I don't imagine my experience with Verizon would be any better, and I'm relatively confident that Sprint doesn't have the coverage it takes to work well for us. The fact is, AT&T, for whatever reason, doesn't have jack for Android phones. May not be Android's fault, but it's still a shortcoming that prevents me from having it just like the iPhone's exclusivity keeps some folks on other networks from having it. Innovation? What Innovation? Android has a nice dashboard and a great notification system and… nothing else original. I keep reading about how disappointing the iPhone is nowadays. "It has no innovation," people say. Who does? Android has modeled its behavior after the iPhone. That's fine, but if all you've got is a similar product and I'm invested both skill-wise and app-wise in my current platform, why should I change? Microsoft's new Windows Phone 7 looks somewhat innovative, and I'm pretty excited to see what they'll bring to the table, but that's another six months away, at least. I've got a 3 year old phone that has some annoying issues now (thanks to recent encounters with water). I need a new phone now. Is This Going to Work? There's no shortage of criticism of Apple over its App Store policies, and I've vented my own anger about it. However, I will give them credit: their screening of apps has done a great job of weeding out the crap and gives an excellent indication that the app will work on my device. How about Android? Nope. It might work on your phone. Maybe. You'll have to try it to see. Get burned by it? Well, write a nasty review to try to keep others from making the mistake you did. If you don't mind doing that stuff, then Android is the platform for you. Personally, I'd rather have a receptionist screening out the telemarketing and survey calls than hang up on them myself, but that's your call. Slow, Slowing, Slower All this yapping about multitasking. This is an area I've been on Apple's side from the beginning. Sorry folks, but this is the number one reason I hated Windows Mobile: the longer you use it, the slower it gets because it doesn't kill apps. I'm with Steve Jobs on this one: if you see a task manager, we're doing it wrong. I don't want to have to manually kill apps. I hate doing that on Windows let alone on a mobile device. To me, priority one should be keeping the device speedy. Waiting for your device to respond is unacceptable. Bonus! Taken from iPhone Letdown? 8 Things Apple Didn't Announce, here are my responses: 4G Yeah, let me know if your area actually has it. I live in Lincoln, Nebraska. No carrier is going to have 4G here for at least 3 years. Meanwhile, you still get to pay for it. Yay! Cloud iTunes/OTA Sync You got me here. Of course, whether or not your Android device will be able to do it is always a good question. 3G Video Chat You got me here, too. I'm sure you spent countless hours in front of your phone with video chat. Also, I can't wait for the "No Video Chat While Driving" laws. Mobile Hotspot This is a neat feature, but as the author points out, it's left up to the carrier whether to implement it or not. Pretty sure any Android phones that come to AT&T won't have this enabled in the foreseeable future. Is Verizon even allowing this? I just figured Sprint was because they're failing so hard at keeping customers. Free MobileMe I use Google's services with my iPhone. The only people I know who use MobileMe are Apple fanboys and fangirls. If you choose to pay for a service that you can get for free, that's your decision, not Apple's. Voice Input Voice input has been available on phones (even "dumb" phones) for years now. iPhone does have the ability, though limited. Why don't I hear people telling their phones what to do? Maybe because it's still easier to use your fingers than talk to it. Get back to me when this becomes an important feature. Free Navigation Maybe this will be a bigger deal to me now that I'm getting a phone with GPS, but when using my buddy's 3gs, Google maps has worked just fine. Maybe I just don't trust turn-by-turn navigation enough to want it. Dashboard The only legitimate complaint on this list, to me. iPhone's home screen is pathetic, doubly so for the iPad. What a waste of perfectly usable space. I also want to add notifications to this list. Android's notification panel is far superior to the iPhone's. I don't want to hunt all over my screen to find little red dots. Put 'em in one place, Apple.

    Read the article

  • Why people don't patch and upgrade?!?

    - by Mike Dietrich
    Discussing the topic "Why Upgrade" or "Why not Upgrade" is not always fun. Actually the arguments repeat from customer to customer. Typically we hear things such as: A PSU or Patch Set introduces new bugs A new PSU or Patch Set introduces new features which lead to risk and require application verification  Patching means risk Patching changes the execution plans Patching requires too much testing Patching is too much work for our DBAs Patching costs a lot of money and doesn't pay out And to be very honest sometimes it's hard for me to stay calm in such discussions. Let's discuss some of these points a bit more in detail. A PSU or Patch Set introduces new bugsWell, yes, that is true as no software containing more than some lines of code is bug free. This applies to Oracle's code as well as too any application or operating system code. But first of all, does that mean you never patch your OS because the patch may introduce new flaws? And second, what is the point of saying "it introduces new bugs"? Does that mean you will never get rid of the mean issues we know about and we fixed already? Scroll down from MOS Note:161818.1 to the patch release you are on, no matter if it's 10.2.0.4 or 11.2.0.3 and check for the Known Issues And Alerts.Will you take responsibility to know about all these issues and refuse to upgrade to 11.2.0.4? I won't. A new PSU or Patch Set introduces new featuresOk, we can discuss that. Offering new functionality within a database patch set is a dubious thing. It has advantages such as in 11.2.0.4 where we backported Database Redaction to. But this is something you will only use once you have an Advanced Security license. I interpret that statement I've heard quite often from customers in a different way: People don't want to get surprises such as new behaviour. This certainly gives everybody a hard time. And we've had many examples in the past (SESSION_CACHED_CURSROS in 10.2.0.4,  _DATAFILE_WRITE_ERRORS_CRASH_INSTANCE in 11.2.0.2 and others) where those things weren't documented, not even in the README. Thanks to many friends out there I learned about those as well. So new behaviour is the topic people consider as risky - not really new features. And just to point this out: A PSU never brings in new features or new behaviour by definition! Patching means riskDoes it really mean risk? Yes, there were issues in the past (and sometimes in the present as well) where a patch didn't get installed correctly. But personally I consider it way more risky to not patch. Keep that in mind: The day Oracle publishes an PSU (or CPU) containing security fixes all the great security experts out there go public with their findings as well. So from that day on even my grandma can find out about those issues and try to attack somebody. Now a lot of people say: "My database does not face the internet." And I will answer: "The enemy is sitting already behind your firewalls. And knows potentially about these things." My statement: Not patching introduces way more risk to your environment than patching. Seriously! Patching changes the execution plansDo they really? I agree - there's a very small risk for this happening with Patch Sets. But not with PSUs or CPUs as they contain no optimizer fixes changing behaviour (but they may contain fixes curing wrong-query-result-bugs). But what's the point of a changing execution plan? In Oracle Database 11g it is so simple to be prepared. SQL Plan Management is a free EE feature - so once that occurs you'll put the plan into the Plan Baseline. Basta! Yes, you wouldn't like to get such surprises? Than please use the SQL Performance Analyzer (SPA) from Real Application Testing and you'll detect that easily upfront in minutes. And not to forget this, a plan change can also be very positive!Yes, there's a little risk with a database patchset - and we have many possibilites to detect this before patching. Patching requires too much testingWell, does it really? I have seen in the past 12 years how people test. There are very different efforts and approaches on this. I have seen people spending a hell of money on licenses or on project team staffing. And I have seen people sailing blindly without any tests just going the John-Wayne-approach.Proper tools will allow you to test easily without too much efforts. See the paragraph above. We have used Real Application Testing in so many customer projects reducing the amount of work spend on testing by over 50%. But apart from that at some point you will have to stop testing. If you don't you'll get lost and you'll burn money. There's no 100% guaranty. You will have to deal with a little risk as reaching the final 5% of certainty will cost you the same as it did cost to reach 95%. And doing this will lead to abnormal long product cycles that you'll run behind forever. And this will cost even more money. Patching is too much work for our DBAsPatching is a lot of work. I agree. And it's no fun work. It's boring, annoying. You don't learn much from that. That's why you should try to automate this task. Use the Database's Lifecycle Management Pack. And don't cry about the fact that it costs money. Yes it does. But it will ease the process and you'll save a lot of costs as you don't waste your valuable time with patching. Or use Oracle Database 12c Oracle Multitenant and patch either by unplug/plug or patch an entire container database with all PDBs with one patch in one task. We have customer reference cases proofing it saved them 75% of time, effort and cost since they've used Lifecycle Management Pack. So why don't you use it? Patching costs a lot of money and doesn't pay outWell, see my statements in the paragraph above. And it pays out as flying with a database with 100 known critical flaws in it which are already fixed by Oracle (such as in the Oct 2013 PSU for Oracle Database 12c) will cost ways more in case of failure or even data loss. Bet with me? Let me finally ask you some questions. What cell phone are you using and which OS does it run? Do you have an iPhone 5 and did you upgrade already to iOS 7.0.3? I've just encountered on mine that the alarm (which I rely on when traveling) has gotten now a dependency on the physical switch "sound on/off". If it is switched to "off" physically the alarm rings "silently". What a wonderful example of a behaviour change coming in with a patch set. Will this push you to stay with iOS5 or iOS6? No, because those have security flaws which won't be fixed anymore. What browser are you surfing with? Do you use Mozilla 3.6? Well, congratulations to all the hackers. It will be easy for them to attack you and harm your system. I'd guess you have the auto updater on.  Same for Google Chrome, Safari, IE. Right? -Mike The T.htmtableborders, .htmtableborders td, .htmtableborders th {border : 1px dashed lightgrey ! important;} html, body { border: 0px; } body { background-color: #ffffff; } img, hr { cursor: default }

    Read the article

  • CodePlex Daily Summary for Monday, August 18, 2014

    CodePlex Daily Summary for Monday, August 18, 2014Popular ReleasesMagick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...WallSwitch: WallSwitch 1.2.5: Version 1.2.5 Changes: Added support for sequential order in collage mode. Added option to display multiple images per switch in collage mode. Fixed bug where border width wasn't being loaded properly, and was reverting to default values. Fixed bug where sequential order was repeating images on multiple monitors. Decreased likelihood of random images being repeated.OpenCppCoverage: OpenCppCoverage 0.9.1: - Add Jenkins support. - Command line argument can be placed inside a config file. If you do not have Visual Studio C++ 2013 you need to download redistributable packages: http://www.microsoft.com/en-us/download/details.aspx?id=40784Easy Backup Windows Service: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Force run program as administrator by default. Add 'everyday' schedule element. Update solution to VS 2013.Easy Backup Application: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Fix app location initialization. Force run program as administrator by default. Update solution to VS 2013.TEBookConverter: 1.5: Added: Turkish and French translations Added: A few interface changes Removed: SkinDynamulet: Dynamulet v0.1: DynamoDB Transaction Server v0.1Console parallel nunit tests runner: ConsoleUnitTestsRunner 1.03: bugfixingFluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.Google .Net API: Drive.Sample: Google .NET Client API – Drive.SampleInstructions for the Google .NET Client API – Drive.Sample</h2> http://code.google.com/p/google-api-dotnet-client/source/browse/?repo=samples#hg%2FDrive.SampleBrowse Source, or main file http://code.google.com/p/google-api-dotnet-client/source/browse/Drive.Sample/Program.cs?repo=samplesProgram.cs <h3>1. Checkout Instructions</h3> <p><b>Prerequisites:</b> Install Visual Studio, and <a href="http://mercurial.selenic.com/">Mercurial</a>.</p> ...FineUI - jQuery / ExtJS based ASP.NET Controls: FineUI v4.1.1: -??Form??????????????(???-5929)。 -?TemplateField??ExpandOnDoubleClick、ExpandOnEnter、ExpandToSelectRow????(LZOM-5932)。 -BodyPadding???????,??“5”“5 10”,???????????“5px”“5px 10px”。 -??TriggerBox?EnableEdit=false????,??????????????(Jango_Jing-5450)。 -???????????DataKeyNames???????????(yygy-6002)。 -????????????????????????(Gnid-6018)。 -??PageManager???AutoSizePanelID????,??????????????????(yygy-6008)。 -?FState???????????????,????????????????(????-5925)。 -??????OnClientClick???return?????????(FineU...DNN CMS Platform: 07.03.02: Major Highlights Fixed backwards compatibility issue with 3rd party control panels Fixed issue in the drag and drop functionality of the File Uploader in IE 11 and Safari Fixed issue where users were able to create pages with the same name Fixed issue that affected older versions of DNN that do not include the maxAllowedContentLength during upgrade Fixed issue that stopped some skins from being upgraded to newer versions Fixed issue that randomly showed an unexpected error during us...WordMat: WordMat for Mac: WordMat for Mac has a few limitations compared to the Windows version - Graph is not supported (Gnuplot, GeoGebra and Excel works) - Units are not supported yet (Coming up) The Mac version is yet as tested as the windows version.MFCMAPI: August 2014 Release: Build: 15.0.0.1042 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010/2013 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeEWSEditor: EwsEditor 1.10 Release: • Export and import of items as a full fidelity steam works - without proxy classes! - I used raw EWS POSTs. • Turned off word wrap for EWS request field in EWS POST windows. • Several windows with scrolling texts boxes were limiting content to 32k - I removed this restriction. • Split server timezone info off to separate menu item from the timezone info windows so that the timezone info window could be used without logging into a mailbox. • Lots of updates to the TimeZone window. • UserAgen...New Projectsballmon: ballmonExchange Database Recovery With and Without Log Files is Possible: This segments giving an overview of Exchange Server transaction log files. It describes process how users can recover their database with & without log filesFabs.Net: Ego tatmini ve gelisme amaçli yaptigim bir projedir.JacoChat: JacoChat is a simple chatting interface that uses my personal webserver as a "wall" for people to chat on.ManagedWin32: ManagedWin32 is a library that exposes the Win32 API to .NET applications.Open XML Extensions: The project provides additions to the Open XML SDK and related projects (e.g., PowerTools for Open XML), starting with MemoryStreams for Open XML Documents.orntic: Project for insurace companyTBOX: The Treasure Box Library: TBOX is a mutli-platform c library for unix, windows, mac, ios, android, etc. It includes asio, stream, container, algorithm, xml and other library modules.WeatherTS: Typescript weather application.?????@/????: ??????????????:????,????,????,???????,????????,??????:????????,?????! ?????????: ????????????????????,????????:??、??、???,?????????????????????! ????-??: ??????????????,????,???????????????。

    Read the article

  • Getting Started with jqChart for ASP.NET Web Forms

    - by jqChart
    Official Site | Samples | Download | Documentation | Forum | Twitter Introduction jqChart takes advantages of HTML5 Canvas to deliver high performance client-side charts and graphs across browsers (IE 6+, Firefox, Chrome, Opera, Safari) and devices, including iOS and Android mobile devices. Some of the key features are: High performance rendering. Animaitons. Scrolling/Zoooming. Support for unlimited number of data series and data points. Support for unlimited number of chart axes. True DateTime Axis. Logarithmic and Reversed axis scale. Large set of chart types - Bar, Column, Pie, Line, Spline, Area, Scatter, Bubble, Radar, Polar. Financial Charts - Stock Chart and Candlestick Chart. The different chart types can be easily combined.  System Requirements Browser Support jqChart supports all major browsers: Internet Explorer - 6+ Firefox Google Chrome Opera Safari jQuery version support jQuery JavaScript framework is required. We recommend using the latest official stable version of the jQuery library. Visual Studio Support jqChart for ASP.NET does not require using Visual Studio. You can use your favourite code editor. Still, the product has been tested with several versions of Visual Studio .NET and you can find the list of supported versions below: Visual Studio 2008 Visual Studio 2010 Visual Studio 2012 ASP.NET Web Forms support Supported version - ASP.NET Web Forms 3.5, 4.0 and 4.5 Installation Download and unzip the contents of the archive to any convenient location. The package contains the following folders: [bin] - Contains the assembly DLLs of the product (JQChart.Web.dll) for WebForms 3.5, 4.0 and 4.5. This is the assembly that you can reference directly in your web project (or better yet, add it to your ToolBox and then drag & drop it from there). [js] - The javascript files of jqChart and jqRangeSlider (and the needed libraries). You need to include them in your ASPX page, in order to gain the client side functionality of the chart. The first file is "jquery-1.5.1.min.js" - this is the official jQuery library. jqChart is built upon jQuery library version 1.4.3. The second file you need is the "excanvas.js" javascript file. It is used from the versions of IE, which dosn't support canvas graphics. The third is the jqChart javascript code itself, located in "jquery.jqChart.min.js". The last one is the jqRangeSlider javascript, located in "jquery.jqRangeSlider.min.js". It is used when the chart zooming is enabled. [css] - Contains the Css files that the jqChart and the jqRangeSlider need. [samples] - Contains some examples that use the jqChart. For full list of samples plese visit - jqChart for ASP.NET Samples. [themes] - Contains the themes shipped with the products. It is used from the jqRangeSlider. Since jqRangeSlider supports jQuery UI Themeroller, any theme compatible with jQuery UI ThemeRoller will work for jqRangeSlider as well. You can download any additional themes directly from jQuery UI's ThemeRoller site available here: http://jqueryui.com/themeroller/ or reference them from Microsoft's / Google's CDN. <link rel="stylesheet" type="text/css" media="screen" href="http://ajax.aspnetcdn.com/ajax/jquery.ui/1.8.21/themes/smoothness/jquery-ui.css" /> The final result you will have in an ASPX page containing jqChart would be something similar to that (assuming you have copied the [js] to the Script folder and [css] to Content folder of your ASP.NET site respectively). <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="samples_cs.Default" %> <%@ Register Assembly="JQChart.Web" Namespace="JQChart.Web.UI.WebControls" TagPrefix="jqChart" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html > <head runat="server"> <title>jqChart ASP.NET Sample</title> <link rel="stylesheet" type="text/css" href="~/Content/jquery.jqChart.css" /> <link rel="stylesheet" type="text/css" href="~/Content/jquery.jqRangeSlider.css" /> <link rel="stylesheet" type="text/css" href="~/Content/themes/smoothness/jquery-ui-1.8.21.css" /> <script src="<% = ResolveUrl("~/Scripts/jquery-1.5.1.min.js") %>" type="text/javascript"></script> <script src="<% = ResolveUrl("~/Scripts/jquery.jqRangeSlider.min.js") %>" type="text/javascript"></script> <script src="<% = ResolveUrl("~/Scripts/jquery.jqChart.min.js") %>" type="text/javascript"></script> <!--[if IE]><script lang="javascript" type="text/javascript" src="<% = ResolveUrl("~/Scripts/excanvas.js") %>"></script><![endif]--> </head> <body> <form id="form1" runat="server"> <asp:ObjectDataSource ID="ObjectDataSource1" runat="server" SelectMethod="GetData" TypeName="SamplesBrowser.Models.ChartData"></asp:ObjectDataSource> <jqChart:Chart ID="Chart1" Width="500px" Height="300px" runat="server" DataSourceID="ObjectDataSource1"> <Title Text="Chart Title"></Title> <Animation Enabled="True" Duration="00:00:01" /> <Axes> <jqChart:CategoryAxis Location="Bottom" ZoomEnabled="true"> </jqChart:CategoryAxis> </Axes> <Series> <jqChart:ColumnSeries XValuesField="Label" YValuesField="Value1" Title="Column"> </jqChart:ColumnSeries> <jqChart:LineSeries XValuesField="Label" YValuesField="Value2" Title="Line"> </jqChart:LineSeries> </Series> </jqChart:Chart> </form> </body> </html>   Official Site | Samples | Download | Documentation | Forum | Twitter

    Read the article

  • User Input That Involves A ' ' Causes A Substring Out Of Range Error

    - by Greenhouse Gases
    Hi Stackoverflow people. You have already helped me quite a bit but near the end of writing this program I have somewhat of a bug. You see in order to read in city names with a space in from a text file I use a '/' that is then replaced by the program for a ' ' (and when the serializer runs the opposite happens for next time the program is run). The problem is when a user inputs a name too add, search for, or delete that contains a space, for instance 'New York' I get a Debug Assertion Error with a substring out of range expression. I have a feeling it's to do with my correctCase function, or setElementsNull that looks at the string until it experiences a null element in the array, however ' ' is not null so I'm not sure how to fix this and I'm going a bit insane. Any help would be much appreciated. Here is my code: // U08221.cpp : main project file. #include "stdafx.h" #include <_iostream> #include <_string> #include <_fstream> #include <_cmath> using namespace std; class locationNode { public: string nodeCityName; double nodeLati; double nodeLongi; locationNode* Next; locationNode(string nameOf, double lat, double lon) { this->nodeCityName = nameOf; this->nodeLati = lat; this->nodeLongi = lon; this->Next = NULL; } locationNode() // NULL constructor { } void swapProps(locationNode *node2) { locationNode place; place.nodeCityName = this->nodeCityName; place.nodeLati = this->nodeLati; place.nodeLongi = this->nodeLongi; this->nodeCityName = node2->nodeCityName; this->nodeLati = node2->nodeLati; this->nodeLongi = node2->nodeLongi; node2->nodeCityName = place.nodeCityName; node2->nodeLati = place.nodeLati; node2->nodeLongi = place.nodeLongi; } void modify(string name) { this->nodeCityName = name; } void modify(double latlon, int mod) { switch(mod) { case 2: this->nodeLati = latlon; break; case 3: this->nodeLongi = latlon; break; } } void correctCase() // Correct upper and lower case letters of input { int MAX_SIZE = 35; int firstLetVal = this->nodeCityName[0], letVal; int n = 1; // variable for name index from second letter onwards if((this->nodeCityName[0] >90) && (this->nodeCityName[0] < 123)) // First letter is lower case { firstLetVal = firstLetVal - 32; // Capitalise first letter this->nodeCityName[0] = firstLetVal; } while(this->nodeCityName[n] != NULL) { if((this->nodeCityName[n] >= 65) && (this->nodeCityName[n] <= 90)) { if(this->nodeCityName[n - 1] != 32) { letVal = this->nodeCityName[n] + 32; this->nodeCityName[n] = letVal; } } n++; } } }; Here is the main part of the program: // U08221.cpp : main project file. #include "stdafx.h" #include "Locations2.h" #include <_iostream> #include <_string> #include <_fstream> #include <_cmath> using namespace std; #define pi 3.14159265358979323846264338327950288 #define radius 6371 #define gig 1073741824 //size of a gigabyte in bytes int n = 0,x, locationCount = 0, MAX_SIZE = 35 , g = 0, i = 0, modKey = 0, xx; string cityNameInput, alter; char targetCity[35], skipKey = ' '; double lat1, lon1, lat2, lon2, dist, dummy, modVal, result; bool acceptedInput = false, match = false, nodeExists = false;// note: addLocation(), set to true to enable user input as opposed to txt file locationNode *temp, *temp2, *example, *seek, *bridge, *start_ptr = NULL; class Menu { int junction; public: /* Convert decimal degrees to radians */ public: void setElementsNull(char cityParam[]) { int y=0; while(cityParam[y] != NULL) { y++; } while(y < MAX_SIZE) { cityParam[y] = NULL; y++; } } void correctCase(string name) // Correct upper and lower case letters of input { int MAX_SIZE = 35; int firstLetVal = name[0], letVal; int n = 1; // variable for name index from second letter onwards if((name[0] >90) && (name[0] < 123)) // First letter is lower case { firstLetVal = firstLetVal - 32; // Capitalise first letter name[0] = firstLetVal; } while(name[n] != NULL) { if((name[n] >= 65) && (name[n] <= 90)) { letVal = name[n] + 32; name[n] = letVal; } n++; } for(n = 0; targetCity[n] != NULL; n++) { targetCity[n] = name[n]; } } bool nodeExistTest(char targetCity[]) // see if entry is present in the database { match = false; seek = start_ptr; int letters = 0, letters2 = 0, x = 0, y = 0; while(targetCity[y] != NULL) { letters2++; y++; } while(x <= locationCount) // locationCount is number of entries currently in list { y=0, letters = 0; while(seek->nodeCityName[y] != NULL) // count letters in the current name { letters++; y++; } if(letters == letters2) // same amount of letters in the name { y = 0; while(y <= letters) // compare each letter against one another { if(targetCity[y] == seek->nodeCityName[y]) { match = true; y++; } else { match = false; y = letters + 1; // no match, terminate comparison } } } if(match) { x = locationCount + 1; //found match so terminate loop } else{ if(seek->Next != NULL) { bridge = seek; seek = seek->Next; x++; } else { x = locationCount + 1; // end of list so terminate loop } } } return match; } double deg2rad(double deg) { return (deg * pi / 180); } /* Convert radians to decimal degrees */ double rad2deg(double rad) { return (rad * 180 / pi); } /* Do the calculation */ double distance(double lat1, double lon1, double lat2, double lon2, double dist) { dist = sin(deg2rad(lat1)) * sin(deg2rad(lat2)) + cos(deg2rad(lat1)) * cos(deg2rad(lat2)) * cos(deg2rad(lon1 - lon2)); dist = acos(dist); dist = rad2deg(dist); dist = (radius * pi * dist) / 180; return dist; } void serialise() { // Serialize to format that can be written to text file fstream outfile; outfile.open("locations.txt",ios::out); temp = start_ptr; do { for(xx = 0; temp->nodeCityName[xx] != NULL; xx++) { if(temp->nodeCityName[xx] == 32) { temp->nodeCityName[xx] = 47; } } outfile << endl << temp->nodeCityName<< " "; outfile<<temp->nodeLati<< " "; outfile<<temp->nodeLongi; temp = temp->Next; }while(temp != NULL); outfile.close(); } void sortList() // do this { int changes = 1; locationNode *node1, *node2; while(changes > 0) // while changes are still being made to the list execute { node1 = start_ptr; node2 = node1->Next; changes = 0; do { xx = 1; if(node1->nodeCityName[0] > node2->nodeCityName[0]) //compare first letter of name with next in list { node1->swapProps(node2); // should come after the next in the list changes++; } else if(node1->nodeCityName[0] == node2->nodeCityName[0]) // if same first letter { while(node1->nodeCityName[xx] == node2->nodeCityName[xx]) // check next letter of name { if((node1->nodeCityName[xx + 1] != NULL) && (node2->nodeCityName[xx + 1] != NULL)) // check next letter until not the same { xx++; } else break; } if(node1->nodeCityName[xx] > node2->nodeCityName[xx]) { node1->swapProps(node2); // should come after the next in the list changes++; } } node1 = node2; node2 = node2->Next; // move to next pair in list } while(node2 != NULL); } } void initialise() { cout << "Populating List..."; ifstream inputFile; inputFile.open ("locations.txt", ios::in); char inputName[35] = " "; double inputLati = 0, inputLongi = 0; //temp = new locationNode(inputName, inputLati, inputLongi); do { inputFile.get(inputName, 35, ' '); inputFile >> inputLati; inputFile >> inputLongi; if(inputName[0] == 10 || 13) //remove linefeed from input { for(int i = 0; inputName[i] != NULL; i++) { inputName[i] = inputName[i + 1]; } } for(xx = 0; inputName[xx] != NULL; xx++) { if(inputName[xx] == 47) // if it is a '/' { inputName[xx] = 32; // replace it for a space } } temp = new locationNode(inputName, inputLati, inputLongi); if(start_ptr == NULL){ // if list is currently empty, start_ptr will point to this node start_ptr = temp; } else { temp2 = start_ptr; // We know this is not NULL - list not empty! while (temp2->Next != NULL) { temp2 = temp2->Next; // Move to next link in chain until reach end of list } temp2->Next = temp; } ++locationCount; // increment counter for number of records in list } while(!inputFile.eof()); cout << "Successful!" << endl << "List contains: " << locationCount << " entries" << endl; inputFile.close(); cout << endl << "*******************************************************************" << endl << "DISTANCE CALCULATOR v2.0\tAuthors: Darius Hodaei, Joe Clifton" << endl; } void menuInput() { char menuChoice = ' '; while(menuChoice != 'Q') { // Menu if(skipKey != 'X') // This is set by case 'S' below if a searched term does not exist but wants to be added { cout << endl << "*******************************************************************" << endl; cout << "Please enter a choice for the menu..." << endl << endl; cout << "(P) To print out the list" << endl << "(O) To order the list alphabetically" << endl << "(A) To add a location" << endl << "(D) To delete a record" << endl << "(C) To calculate distance between two points" << endl << "(S) To search for a location in the list" << endl << "(M) To check memory usage" << endl << "(U) To update a record" << endl << "(Q) To quit" << endl; cout << endl << "*******************************************************************" << endl; cin >> menuChoice; if(menuChoice >= 97) { menuChoice = menuChoice - 32; // Turn the lower case letter into an upper case letter } } skipKey = ' '; //Reset skipKey so that it does not skip the menu switch(menuChoice) { case 'P': temp = start_ptr; // set temp to the start of the list do { if (temp == NULL) { cout << "You have reached the end of the database" << endl; } else { // Display details for what temp points to at that stage cout << "Location : " << temp->nodeCityName << endl; cout << "Latitude : " << temp->nodeLati << endl; cout << "Longitude : " << temp->nodeLongi << endl; cout << endl; // Move on to next locationNode if one exists temp = temp->Next; } } while (temp != NULL); break; case 'O': { sortList(); // pass by reference??? cout << "List reordered alphabetically" << endl; } break; case 'A': char cityName[35]; double lati, longi; cout << endl << "Enter the name of the location: "; cin >> cityName; for(xx = 0; cityName[xx] != NULL; xx++) { if(cityName[xx] == 47) // if it is a '/' { cityName[xx] = 32; // replace it for a space } } if(!nodeExistTest(cityName)) { cout << endl << "Please enter the latitude value for this location: "; cin >> lati; cout << endl << "Please enter the longitude value for this location: "; cin >> longi; cout << endl; temp = new locationNode(cityName, lati, longi); temp->correctCase(); //start_ptr allignment if(start_ptr == NULL){ // if list is currently empty, start_ptr will point to this node start_ptr = temp; } else { temp2 = start_ptr; // We know this is not NULL - list not empty! while (temp2->Next != NULL) { temp2 = temp2->Next; // Move to next link in chain until reach end of list } temp2->Next = temp; } ++locationCount; // increment counter for number of records in list cout << "Location sucessfully added to the database! There are " << locationCount << " location(s) stored" << endl; } else { cout << "Node is already present in the list and so cannot be added again" << endl; } break; case 'D': { junction = 0; locationNode *place; cout << "Enter the name of the city you wish to remove" << endl; cin >> targetCity; setElementsNull(targetCity); correctCase(targetCity); for(xx = 0; targetCity[xx] != NULL; xx++) { if(targetCity[xx] == 47) { targetCity[xx] = 32; } } if(nodeExistTest(targetCity)) //if this node does exist { if(seek == start_ptr) // if it is the first in the list { junction = 1; } if(seek->Next == NULL) // if it is last in the list { junction = 2; } switch(junction) // will alter list accordingly dependant on where the searched for link is { case 1: start_ptr = start_ptr->Next; delete seek; --locationCount; break; case 2: place = seek; seek = bridge; seek->Next = NULL; delete place; --locationCount; break; default: bridge->Next = seek->Next; delete seek; --locationCount; break; } cout << endl << "Link deleted. There are now " << locationCount << " locations." << endl; } else { cout << "That entry does not currently exist" << endl << endl << endl; } } break; case 'C': { char city1[35], city2[35]; cout << "Enter the first city name" << endl; cin >> city1; setElementsNull(city1); correctCase(targetCity); if(nodeExistTest(city1)) { lat1 = seek->nodeLati; lon1 = seek->nodeLongi; cout << "Lati = " << seek->nodeLati << endl << "Longi = " << seek->nodeLongi << endl << endl; } cout << "Enter the second city name" << endl; cin >> city2; setElementsNull(city2); correctCase(targetCity); if(nodeExistTest(city2)) { lat2 = seek->nodeLati; lon2 = seek->nodeLongi; cout << "Lati = " << seek->nodeLati << endl << "Longi = " << seek->nodeLongi << endl << endl; } result = distance (lat1, lon1, lat2, lon2, dist); cout << "The distance between these two locations is " << result << " kilometres." << endl; } break; case 'S': { char choice; cout << "Enter search term..." << endl; cin >> targetCity; setElementsNull(targetCity); correctCase(targetCity); if(nodeExistTest(targetCity)) { cout << "Latitude: " << seek->nodeLati << endl << "Longitude: " << seek->nodeLongi << endl; } else { cout << "Sorry, that city is not currently present in the list." << endl << "Would you like to add this city now Y/N?" << endl; cin >> choice; /*while(choice != ('Y' || 'N')) { cout << "Please enter a valid choice..." << endl; cin >> choice; }*/ switch(choice) { case 'Y': skipKey = 'X'; menuChoice = 'A'; break; case 'N': break; default : cout << "Invalid choice" << endl; break; } } break; } case 'M': { cout << "Locations currently stored: " << locationCount << endl << "Memory used for this: " << (sizeof(start_ptr) * locationCount) << " bytes" << endl << endl << "You can store " << ((gig - (sizeof(start_ptr) * locationCount)) / sizeof(start_ptr)) << " more locations" << endl ; break; } case 'U': { cout << "Enter the name of the Location you would like to update: "; cin >> targetCity; setElementsNull(targetCity); correctCase(targetCity); if(nodeExistTest(targetCity)) { cout << "Select (1) to alter City Name, (2) to alter Longitude, (3) to alter Latitude" << endl; cin >> modKey; switch(modKey) { case 1: cout << "Enter the new name: "; cin >> alter; cout << endl; seek->modify(alter); break; case 2: cout << "Enter the new latitude: "; cin >> modVal; cout << endl; seek->modify(modVal, modKey); break; case 3: cout << "Enter the new longitude: "; cin >> modVal; cout << endl; seek->modify(modVal, modKey); break; default: break; } } else cout << "Location not found" << endl; break; } } } } }; int main(array<System::String ^> ^args) { Menu mm; //mm.initialise(); mm.menuInput(); mm.serialise(); }

    Read the article

  • Can't get the L2TP IPSEC up and running

    - by Maciej Swic
    i have an Ubuntu 11.10 (oneiric) server running on a ReadyNAS. Im planning to use this to accept ipsec+l2tp connections through a router. However, the connection is failing somewhere half through. Using Openswan IPsec U2.6.28/K3.0.0-12-generic and trying to connect with an iOS 5 iPhone 4S. This is how far i can get: auth.log: Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "PSK" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-NAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-noNAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "passthrough-for-non-l2tp" Jan 19 13:54:11 ubuntu pluto[1990]: listening for IKE messages Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying new style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying old style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo ::1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 2001:470:28:81:a00:27ff:* Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/etc/ipsec.secrets" Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/var/lib/openswan/ipsec.secrets.inc" Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [RFC 3947] method set to=109 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] method set to=110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [8f8d83826d246b6fc7a8a6a428c11de8] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [4d1e0e136deafa34c4f3ea9f02ec7285] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [80d0bb3def54565ee84645d4c85ce3ee] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [9909b64eed937c6573de52ace952fa6b] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [Dead Peer Detection] Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: responding to Main Mode from unknown peer 95.*.*.233 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R1: sent MR1, expecting MI2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R2: sent MR2, expecting MI3 Jan 19 14:05:03 ubuntu pluto[1990]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 95.*.*.233 port 500, complainant 95.*.*.233: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Router config UDP 500, 1701 and 4500 forwarded to 192.168.19.99 (Ubuntu server for ipsec). Ipsec passthrough enabled. /etc/ipsec.conf # /etc/ipsec.conf - Openswan IPsec configuration file # This file: /usr/share/doc/openswan/ipsec.conf-sample # # Manual: ipsec.conf.5 version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes #charonstart=yes #plutostart=yes protostack=netkey conn PSK authby=secret forceencaps=yes pfs=no auto=add keyingtries=3 dpdtimeout=60 dpdaction=clear rekey=no left=192.168.19.99 leftnexthop=192.168.19.1 leftprotoport=17/1701 right=%any rightprotoport=17/%any rightsubnet=vhost:%priv,%no dpddelay=10 #dpdtimeout=10 #dpdaction=clear include /etc/ipsec.d/l2tp-psk.conf /etc/ipsec.d/l2tp-psk.conf conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT # # PreSharedSecret needs to be specified in /etc/ipsec.secrets as # YourIPAddress %any: "sharedsecret" authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=192.168.19.99 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "0" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port, but propose "0" instead of their port. rightprotoport=17/%any dpddelay=10 dpdtimeout=10 dpdaction=clear conn passthrough-for-non-l2tp type=passthrough left=192.168.19.99 leftnexthop=192.168.19.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/ipsec.secrets include /var/lib/openswan/ipsec.secrets.inc %any %any: PSK "my-key" 192.168.19.99 %any: PSK "my-key" /etc/xl2tpd/xl2tpd.conf [global] debug network = yes debug tunnel = yes ipsec saref = no listen-addr = 192.168.19.99 [lns default] ip range = 192.168.19.201-192.168.19.220 local ip = 192.168.19.99 require chap = yes refuse chap = no refuse pap = no require authentication = no ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd pcp-accept-local ipcp-accept-remote noccp auth crtscts idle 1800 mtu 1410 mru 1410 defaultroute debug lock proxyarp connect-delay 5000 ipcp-accept-local /etc/ppp/chap-secrets # Secrets for authentication using CHAP # client server secret IP addresses maciekish * my-secret * * maciekish my-secret * I can't seem to find the problem. Other ipsec connections to other hosts work from the network im currently at.

    Read the article

  • OpenVPN Error : TLS Error: local/remote TLS keys are out of sync: [AF_INET]

    - by Lucidity
    Fist off thanks for reading this, I appreciate any and all suggestions. I am having some serious problems reconnecting to my OpenVPN client using Riseup.net's VPN. I have spent a few days banging my head against the wall in attempts to set this up on my iOS devices....but that is a whole other issue. I was however able to set it up on my Mac OS X specifically on my Windows Vista 32 bit BootCamp VM with relatively little trouble. To originally connect I only had to modify the recommended Config file very slightly (Config file included at the end of this post): - I had to enter the code directly into my config file - And change "dev tap" to "dev tun" So I was connected. (Note - I did test to ensure the VPN was actually working after I originally connected, it was. Also verified the .pem file (inserted as the coding in my config file) for authenticity). I left the VPN running. My computer went to sleep. Today I went to use the internet expecting (possibly incorrectly - I am now unsure if I was wrong to leave it running) to still be connected to the VPN. However I saw immediately I was not. I went to reconnect. And was (am) unable to. My logs after attempting to connect (and getting a connection failed dialog box) show everything working as it should (as far as I can tell) until the end where I get the following lines: Mon Sep 23 21:07:49 2013 us=276809 Initialization Sequence Completed Mon Sep 23 21:07:49 2013 us=276809 MANAGEMENT: >STATE:1379995669,CONNECTED,SUCCESS, OMITTED Mon Sep 23 21:22:50 2013 us=390350 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 21:23:39 2013 us=862180 TLS Error: local/remote TLS keys are out of sync: [AF_INET] VPN IP OMITTED [2] Mon Sep 23 21:23:57 2013 us=395183 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 22:07:41 2013 us=296898 TLS: soft reset sec=0 bytes=513834601/0 pkts=708032/0 Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=1, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=Riseup Networks, [email protected] Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=0, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=vpn.riseup.net Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA So I have searched for a solution online and I have included what I have attempted below, however I fear (know) I am not knowledgeable enough in this area to fix this myself. I apologize in advance for my ignorance. I do tech support for a living, but not this kind of tech support unfortunately. Other notes and troubleshooting done - - Windows Firewall is disabled completely, as well as other Anti-virus programs - Tor is disabled completely - No Proxies running - Time is correct in all locations - Router Firmware is up to date - Able to connect to the internet and as far as I can tell all necessary ports are open. - No settings have been altered since I was able to connect successfully. - Ethernet as well as wifi connections attempted, resulted in same error. Also tried adding the following lines to my config file (without success or change in error): persist-key persist-tun proto tcp (after reading that this error generally occurs on UDP connections, and is extremely rare on TCP) resolv-retry infinite (thinking the connection may have timed out since the issues occurred after leaving VPN connected during about 10 hrs of computer in sleep mode) All attempts resulted in exact same error code included at the top of this post. The original suggestions I found online stated - (regarding the TLS Error) - This error should resolve itself within 60 seconds, or if not quit wait 120 seconds and try again. (Which isnt the case here...) (regarding the Out of Sync" error) - If you continue to get "out of sync" errors and the link does not come up, then it means that something is probably wrong with your config file. You must use either ping and ping-restart on both sides of the connection, or keepalive on the server side of a client/server connection, in order to gracefully recover from "local/remote TLS keys are out of sync" errors. I wouldn't be surprised if my config file is lacking, or not correct. However I can confirm I followed the instructions to a tee. And was able to connect originally (and have not modified my settings or config file since I was able to connect to when the error began occurring). I have a very simple config file: client dev tun tun-mtu 1500 remote vpn.riseup.net auth-user-pass ca RiseupCA.pem redirect-gateway verb 4 <ca> -----BEGIN CERTIFICATE----- [OMITTED] -----END CERTIFICATE----- </ca> I would really appreciate any help or suggestions. I am at a total loss here, I know I'm asking a lot here. Though I am a new user on this site I help others on many forums including Microsoft's support community and especially Apple's support communities, so I will definitely pass on anything I learn here to help others. Thanks so so so much in advance for reading this.

    Read the article

  • Cisco PIX 8.0.4, static address mapping not working?

    - by Bill
    upgrading a working Pix running 5.3.1 to 8.0.4. The memory/IOS upgrade went fine, but the 8.0.4 configuration is not quite working 100%. The 5.3.1 config on which it was based is working fine. Basically, I have three networks (inside, outside, dmz) with some addresses on the dmz statically mapped to outside addresses. The problem seems to be that those addresses can't send or receive traffic from the outside (Internet.) Stuff on the DMZ that does not have a static mapping seems to work fine. So, basically: Inside - outside: works Inside - DMZ: works DMZ - inside: works, where the rules allow it DMZ (non-static) - outside: works But: DMZ (static) - outside: fails Outside - DMZ: fails (So, say, udp 1194 traffic to .102, http to .104) I suspect there's something I'm missing with the nat/global section of the config, but can't for the life of me figure out what. Help, anyone? The complete configuration is below. Thanks for any thoughts! ! PIX Version 8.0(4) ! hostname firewall domain-name asasdkpaskdspakdpoak.com enable password xxxxxxxx encrypted passwd xxxxxxxx encrypted names ! interface Ethernet0 nameif outside security-level 0 ip address XX.XX.XX.100 255.255.255.224 ! interface Ethernet1 nameif inside security-level 100 ip address 192.168.68.1 255.255.255.0 ! interface Ethernet2 nameif dmz security-level 10 ip address 192.168.69.1 255.255.255.0 ! boot system flash:/image.bin ftp mode passive dns server-group DefaultDNS domain-name asasdkpaskdspakdpoak.com access-list acl_out extended permit udp any host XX.XX.XX.102 eq 1194 access-list acl_out extended permit tcp any host XX.XX.XX.104 eq www access-list acl_dmz extended permit tcp host 192.168.69.10 host 192.168.68.17 eq ssh access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 192.168.68.0 255.255.255.0 eq ssh access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 192.168.68.0 255.255.255.0 eq 5901 access-list acl_dmz extended permit udp host 192.168.69.103 any eq ntp access-list acl_dmz extended permit udp host 192.168.69.103 any eq domain access-list acl_dmz extended permit tcp host 192.168.69.103 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.100 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.101 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.101 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.104 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.104 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.69.104 eq 8080 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.69.104 eq 8099 access-list acl_dmz extended permit tcp host 192.168.69.105 any eq www access-list acl_dmz extended permit tcp host 192.168.69.103 any eq smtp access-list acl_dmz extended permit tcp host 192.168.69.105 host 192.168.68.103 eq ssh access-list acl_dmz extended permit tcp host 192.168.69.104 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 any eq https pager lines 24 mtu outside 1500 mtu inside 1500 mtu dmz 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 static (dmz,outside) XX.XX.XX.103 192.168.69.11 netmask 255.255.255.255 static (inside,dmz) 192.168.68.17 192.168.68.17 netmask 255.255.255.255 static (inside,dmz) 192.168.68.100 192.168.68.100 netmask 255.255.255.255 static (inside,dmz) 192.168.68.101 192.168.68.101 netmask 255.255.255.255 static (inside,dmz) 192.168.68.102 192.168.68.102 netmask 255.255.255.255 static (inside,dmz) 192.168.68.103 192.168.68.103 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.104 192.168.69.100 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.105 192.168.69.105 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.102 192.168.69.10 netmask 255.255.255.255 access-group acl_out in interface outside access-group acl_dmz in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.97 1 route dmz 10.71.83.0 255.255.255.0 192.168.69.10 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute dynamic-access-policy-record DfltAccessPolicy no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 192.168.68.17 255.255.255.255 inside telnet timeout 5 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! service-policy global_policy global prompt hostname context Cryptochecksum:2d1bb2dee2d7a3e45db63a489102d7de

    Read the article

  • My IIS server won't serve SSL sites to some browsers

    - by sbleon
    (Update: This is now cross-posted at http://stackoverflow.com/questions/3355000. This is the more appropriate forum, but StackOverflow gets a lot more traffic.) I've got an IIS 6.0 server that won't serve pages over SSL to some browsers. In Webkit-based browsers on OS X 10.6, I can't load pages at all. In MSIE 8 on Windows XP SP3, I can load pages, but it will sometimes hang downloading images or sending POSTs. Working: Firefox 3.6 (OS X + Windows) Chrome (Windows) Partially Working: MSIE 8 (works sometimes, but hangs up, especially on POSTs) Not Working: Chrome 5 (OS X) Safari 5 (OS X) Mobile Safari (iOS 4) On OS X (the easiest platform for me to test on), Chrome and Firefox both negotiate the same TLS Cipher, but Chrome hangs on or after the post-negotiation handshake. Chrome packet capture (via ssldump): 1 1 0.0485 (0.0485) C>S Handshake ClientHello Version 3.1 cipher suites Unknown value 0xc00a Unknown value 0xc009 Unknown value 0xc007 Unknown value 0xc008 Unknown value 0xc013 Unknown value 0xc014 Unknown value 0xc011 Unknown value 0xc012 Unknown value 0xc004 Unknown value 0xc005 Unknown value 0xc002 Unknown value 0xc003 Unknown value 0xc00e Unknown value 0xc00f Unknown value 0xc00c Unknown value 0xc00d Unknown value 0x2f TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_RC4_128_MD5 Unknown value 0x35 TLS_RSA_WITH_3DES_EDE_CBC_SHA Unknown value 0x32 Unknown value 0x33 Unknown value 0x38 Unknown value 0x39 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA compression methods NULL 1 2 0.3106 (0.2620) S>C Handshake ServerHello Version 3.1 session_id[32]= bb 0e 00 00 7a 7e 07 50 5e 78 48 cf 43 5a f7 4d d2 ed 72 8f ff 1d 9e 74 66 74 03 b3 bb 92 8d eb cipherSuite TLS_RSA_WITH_RC4_128_MD5 compressionMethod NULL Certificate ServerHelloDone 1 3 0.3196 (0.0090) C>S Handshake ClientKeyExchange 1 4 0.3197 (0.0000) C>S ChangeCipherSpec 1 5 0.3197 (0.0000) C>S Handshake [hang, no more data transmitted] Firefox packet capture: 1 1 0.0485 (0.0485) C>S Handshake ClientHello Version 3.1 resume [32]= 14 03 00 00 4e 28 de aa da 7a 25 87 25 32 f3 a7 ae 4c 2d a0 e4 57 cc dd d7 0e d7 82 19 f7 8f b9 cipher suites Unknown value 0xff Unknown value 0xc00a Unknown value 0xc014 Unknown value 0x88 Unknown value 0x87 Unknown value 0x39 Unknown value 0x38 Unknown value 0xc00f Unknown value 0xc005 Unknown value 0x84 Unknown value 0x35 Unknown value 0xc007 Unknown value 0xc009 Unknown value 0xc011 Unknown value 0xc013 Unknown value 0x45 Unknown value 0x44 Unknown value 0x33 Unknown value 0x32 Unknown value 0xc00c Unknown value 0xc00e Unknown value 0xc002 Unknown value 0xc004 Unknown value 0x96 Unknown value 0x41 TLS_RSA_WITH_RC4_128_MD5 TLS_RSA_WITH_RC4_128_SHA Unknown value 0x2f Unknown value 0xc008 Unknown value 0xc012 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA Unknown value 0xc00d Unknown value 0xc003 Unknown value 0xfeff TLS_RSA_WITH_3DES_EDE_CBC_SHA compression methods NULL 1 2 0.0983 (0.0497) S>C Handshake ServerHello Version 3.1 session_id[32]= 14 03 00 00 4e 28 de aa da 7a 25 87 25 32 f3 a7 ae 4c 2d a0 e4 57 cc dd d7 0e d7 82 19 f7 8f b9 cipherSuite TLS_RSA_WITH_RC4_128_MD5 compressionMethod NULL 1 3 0.0983 (0.0000) S>C ChangeCipherSpec 1 4 0.0983 (0.0000) S>C Handshake 1 5 0.1019 (0.0035) C>S ChangeCipherSpec 1 6 0.1019 (0.0000) C>S Handshake 1 7 0.1019 (0.0000) C>S application_data 1 8 0.2460 (0.1440) S>C application_data 1 9 0.3108 (0.0648) S>C application_data 1 10 0.3650 (0.0542) S>C application_data 1 11 0.4188 (0.0537) S>C application_data 1 12 0.4580 (0.0392) S>C application_data 1 13 0.4831 (0.0251) S>C application_data [etc] Update: Here's a Wireshark capture from the server end. What's going on with those two much-delayed RST packets? Is that just IIS terminating what it perceives as a non-responsive connection? 19 10.129450 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=3 TSV=699250189 TSER=0 20 10.129517 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [SYN, ACK] Seq=0 Ack=1 Win=16384 Len=0 MSS=1460 WS=0 TSV=0 TSER=0 21 10.168596 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSV=699250189 TSER=0 22 10.172950 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Client Hello 23 10.173267 10.100.xxx.xx 67.249.xxx.xxx TCP [TCP segment of a reassembled PDU] 24 10.173297 10.100.xxx.xx 67.249.xxx.xxx TCP [TCP segment of a reassembled PDU] 25 10.385180 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=148 Ack=2897 Win=524280 Len=0 TSV=699250191 TSER=163006 26 10.385235 10.100.xxx.xx 67.249.xxx.xxx TLSv1 Server Hello, Certificate, Server Hello Done 27 10.424682 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=148 Ack=4215 Win=524280 Len=0 TSV=699250192 TSER=163008 28 10.435245 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Client Key Exchange 29 10.438522 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Change Cipher Spec 30 10.438553 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [ACK] Seq=4215 Ack=421 Win=65115 Len=0 TSV=163008 TSER=699250192 31 10.449036 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Encrypted Handshake Message 32 10.580652 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [ACK] Seq=4215 Ack=458 Win=65078 Len=0 TSV=163010 TSER=699250192 7312 57.315338 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50644 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0 19531 142.316425 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [RST, ACK] Seq=4215 Ack=458 Win=0 Len=0

    Read the article

  • My IIS server won't serve SSL sites to some browsers

    - by sbleon
    (Update: This is now cross-posted at http://stackoverflow.com/questions/3355000. This is the more appropriate forum, but StackOverflow gets a lot more traffic.) I've got an IIS 6.0 server that won't serve pages over SSL to some browsers. In Webkit-based browsers on OS X 10.6, I can't load pages at all. In MSIE 8 on Windows XP SP3, I can load pages, but it will sometimes hang downloading images or sending POSTs. Working: Firefox 3.6 (OS X + Windows) Chrome (Windows) Partially Working: MSIE 8 (works sometimes, but hangs up, especially on POSTs) Not Working: Chrome 5 (OS X) Safari 5 (OS X) Mobile Safari (iOS 4) On OS X (the easiest platform for me to test on), Chrome and Firefox both negotiate the same TLS Cipher, but Chrome hangs on or after the post-negotiation handshake. Chrome packet capture (via ssldump): 1 1 0.0485 (0.0485) C>S Handshake ClientHello Version 3.1 cipher suites Unknown value 0xc00a Unknown value 0xc009 Unknown value 0xc007 Unknown value 0xc008 Unknown value 0xc013 Unknown value 0xc014 Unknown value 0xc011 Unknown value 0xc012 Unknown value 0xc004 Unknown value 0xc005 Unknown value 0xc002 Unknown value 0xc003 Unknown value 0xc00e Unknown value 0xc00f Unknown value 0xc00c Unknown value 0xc00d Unknown value 0x2f TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_RC4_128_MD5 Unknown value 0x35 TLS_RSA_WITH_3DES_EDE_CBC_SHA Unknown value 0x32 Unknown value 0x33 Unknown value 0x38 Unknown value 0x39 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA compression methods NULL 1 2 0.3106 (0.2620) S>C Handshake ServerHello Version 3.1 session_id[32]= bb 0e 00 00 7a 7e 07 50 5e 78 48 cf 43 5a f7 4d d2 ed 72 8f ff 1d 9e 74 66 74 03 b3 bb 92 8d eb cipherSuite TLS_RSA_WITH_RC4_128_MD5 compressionMethod NULL Certificate ServerHelloDone 1 3 0.3196 (0.0090) C>S Handshake ClientKeyExchange 1 4 0.3197 (0.0000) C>S ChangeCipherSpec 1 5 0.3197 (0.0000) C>S Handshake [hang, no more data transmitted] Firefox packet capture: 1 1 0.0485 (0.0485) C>S Handshake ClientHello Version 3.1 resume [32]= 14 03 00 00 4e 28 de aa da 7a 25 87 25 32 f3 a7 ae 4c 2d a0 e4 57 cc dd d7 0e d7 82 19 f7 8f b9 cipher suites Unknown value 0xff Unknown value 0xc00a Unknown value 0xc014 Unknown value 0x88 Unknown value 0x87 Unknown value 0x39 Unknown value 0x38 Unknown value 0xc00f Unknown value 0xc005 Unknown value 0x84 Unknown value 0x35 Unknown value 0xc007 Unknown value 0xc009 Unknown value 0xc011 Unknown value 0xc013 Unknown value 0x45 Unknown value 0x44 Unknown value 0x33 Unknown value 0x32 Unknown value 0xc00c Unknown value 0xc00e Unknown value 0xc002 Unknown value 0xc004 Unknown value 0x96 Unknown value 0x41 TLS_RSA_WITH_RC4_128_MD5 TLS_RSA_WITH_RC4_128_SHA Unknown value 0x2f Unknown value 0xc008 Unknown value 0xc012 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA Unknown value 0xc00d Unknown value 0xc003 Unknown value 0xfeff TLS_RSA_WITH_3DES_EDE_CBC_SHA compression methods NULL 1 2 0.0983 (0.0497) S>C Handshake ServerHello Version 3.1 session_id[32]= 14 03 00 00 4e 28 de aa da 7a 25 87 25 32 f3 a7 ae 4c 2d a0 e4 57 cc dd d7 0e d7 82 19 f7 8f b9 cipherSuite TLS_RSA_WITH_RC4_128_MD5 compressionMethod NULL 1 3 0.0983 (0.0000) S>C ChangeCipherSpec 1 4 0.0983 (0.0000) S>C Handshake 1 5 0.1019 (0.0035) C>S ChangeCipherSpec 1 6 0.1019 (0.0000) C>S Handshake 1 7 0.1019 (0.0000) C>S application_data 1 8 0.2460 (0.1440) S>C application_data 1 9 0.3108 (0.0648) S>C application_data 1 10 0.3650 (0.0542) S>C application_data 1 11 0.4188 (0.0537) S>C application_data 1 12 0.4580 (0.0392) S>C application_data 1 13 0.4831 (0.0251) S>C application_data [etc] Update: Here's a Wireshark capture from the server end. What's going on with those two much-delayed RST packets? Is that just IIS terminating what it perceives as a non-responsive connection? 19 10.129450 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=3 TSV=699250189 TSER=0 20 10.129517 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [SYN, ACK] Seq=0 Ack=1 Win=16384 Len=0 MSS=1460 WS=0 TSV=0 TSER=0 21 10.168596 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSV=699250189 TSER=0 22 10.172950 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Client Hello 23 10.173267 10.100.xxx.xx 67.249.xxx.xxx TCP [TCP segment of a reassembled PDU] 24 10.173297 10.100.xxx.xx 67.249.xxx.xxx TCP [TCP segment of a reassembled PDU] 25 10.385180 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=148 Ack=2897 Win=524280 Len=0 TSV=699250191 TSER=163006 26 10.385235 10.100.xxx.xx 67.249.xxx.xxx TLSv1 Server Hello, Certificate, Server Hello Done 27 10.424682 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=148 Ack=4215 Win=524280 Len=0 TSV=699250192 TSER=163008 28 10.435245 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Client Key Exchange 29 10.438522 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Change Cipher Spec 30 10.438553 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [ACK] Seq=4215 Ack=421 Win=65115 Len=0 TSV=163008 TSER=699250192 31 10.449036 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Encrypted Handshake Message 32 10.580652 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [ACK] Seq=4215 Ack=458 Win=65078 Len=0 TSV=163010 TSER=699250192 7312 57.315338 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50644 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0 19531 142.316425 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [RST, ACK] Seq=4215 Ack=458 Win=0 Len=0

    Read the article

  • Server hung with "blocked for more than 120 seconds", diskless

    - by alterpub
    I have server which hung every 2-5 days. dmesg show following situation: kernel: [490894.231753] INFO: task munin-html:10187 blocked for more than 120 seconds. kernel: [490894.231799] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: [490894.231843] munin-html D 0000000000000000 0 10187 9796 0x00000000 kernel: [490894.231878] ffff88063174b968 0000000000000082 ffff88063174b8d8 0000000000015b80 kernel: [490894.231930] ffff88063174bfd8 0000000000015b80 ffff88063174bfd8 ffff88062fe644d0 kernel: [490894.231982] 0000000000015b80 0000000000015b80 ffff88063174bfd8 0000000000015b80 kernel: [490894.232033] Call Trace: kernel: [490894.232059] [<ffffffff8117fce0>] ? sync_buffer+0x0/0x50 kernel: [490894.232089] [<ffffffff815a1f13>] io_schedule+0x73/0xc0 kernel: [490894.232115] [<ffffffff8117fd25>] sync_buffer+0x45/0x50 kernel: [490894.232143] [<ffffffff815a258f>] __wait_on_bit+0x5f/0x90 kernel: [490894.232170] [<ffffffff8117fce0>] ? sync_buffer+0x0/0x50 kernel: [490894.232197] [<ffffffff815a2638>] out_of_line_wait_on_bit+0x78/0x90 kernel: [490894.232227] [<ffffffff81080250>] ? wake_bit_function+0x0/0x40 kernel: [490894.232255] [<ffffffff8117fcd6>] __wait_on_buffer+0x26/0x30 kernel: [490894.232288] [<ffffffffa00131be>] squashfs_read_data+0x1be/0x520 [squashfs] kernel: [490894.232320] [<ffffffff8114f0f1>] ? __mem_cgroup_try_charge+0x71/0x450 kernel: [490894.232350] [<ffffffffa0013963>] squashfs_cache_get+0x1c3/0x320 [squashfs] kernel: [490894.232381] [<ffffffffa00136eb>] ? squashfs_copy_data+0x10b/0x130 [squashfs] kernel: [490894.232426] [<ffffffff815a3dbe>] ? _raw_spin_lock+0xe/0x20 kernel: [490894.232454] [<ffffffffa0013b68>] ? squashfs_read_metadata+0x48/0xf0 [squashfs] kernel: [490894.232499] [<ffffffffa0013ae1>] squashfs_get_datablock+0x21/0x30 [squashfs] kernel: [490894.232544] [<ffffffffa0015026>] squashfs_readpage+0x436/0x4a0 [squashfs] kernel: [490894.232575] [<ffffffff8111a375>] ? __inc_zone_page_state+0x35/0x40 kernel: [490894.232606] [<ffffffff8110d072>] __do_page_cache_readahead+0x172/0x210 kernel: [490894.232636] [<ffffffff8110d131>] ra_submit+0x21/0x30 kernel: [490894.232662] [<ffffffff811045f3>] filemap_fault+0x3f3/0x450 kernel: [490894.232691] [<ffffffff812bd156>] ? prio_tree_insert+0x256/0x2b0 kernel: [490894.232726] [<ffffffffa009225d>] aufs_fault+0x11d/0x170 [aufs] kernel: [490894.232755] [<ffffffff8111f6d4>] __do_fault+0x54/0x560 kernel: [490894.232782] [<ffffffff81122f39>] handle_mm_fault+0x1b9/0x440 kernel: [490894.232811] [<ffffffff811286f5>] ? do_mmap_pgoff+0x335/0x380 kernel: [490894.232840] [<ffffffff815a7af5>] do_page_fault+0x125/0x350 kernel: [490894.232867] [<ffffffff815a4675>] page_fault+0x25/0x30 Os info cat /etc/issue.net Ubuntu 10.04.2 LTS uname -a Linux Shard1Host3 2.6.35-32-server #68~lucid1-Ubuntu SMP Wed Mar 28 18:33:00 UTC 2012 x86_64 GNU/Linux This system load via ltsp and hasn't harddrives also it has a lot of memory 24Gb. free -m total used free shared buffers cached Mem: 24152 17090 7061 0 50 494 -/+ buffers/cache: 16545 7607 Swap: 0 0 0 I put vmstat info here but I think it won't give results after reboot vmstat 1 30 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 7231156 52196 506400 0 0 0 0 172 143 7 0 92 0 1 0 0 7231024 52196 506400 0 0 0 0 7859 16233 5 0 94 0 0 0 0 7231024 52196 506400 0 0 0 0 7870 16446 2 0 98 0 0 0 0 7230900 52196 506400 0 0 0 0 7308 15661 5 0 95 0 0 0 0 7231100 52196 506400 0 0 0 0 7960 16543 6 0 94 0 0 0 0 7231100 52196 506400 0 0 0 0 7542 16047 5 1 94 0 3 0 0 7231100 52196 506400 0 0 0 0 7709 16621 3 0 96 0 0 0 0 7231220 52196 506400 0 0 0 0 7857 16552 4 0 96 0 0 0 0 7231220 52196 506400 0 0 0 0 7192 15491 6 0 94 0 0 0 0 7231220 52196 506400 0 0 0 0 7423 15792 5 1 94 0 1 0 0 7231260 52196 506404 0 0 0 0 7686 16296 2 0 98 0 0 0 0 7231260 52196 506404 0 0 0 0 6976 15183 5 0 95 0 0 0 0 7231260 52196 506404 0 0 0 0 7303 15600 4 0 95 0 0 0 0 7231320 52196 506404 0 0 0 0 7967 16241 1 0 98 0 0 0 0 7231444 52196 506404 0 0 0 0 6948 15113 6 0 94 0 0 0 0 7231444 52196 506404 0 0 0 0 7931 16181 6 0 94 0 1 0 0 7231516 52196 506404 0 0 0 0 7715 15829 6 0 94 0 0 0 0 7231516 52196 506404 0 0 0 0 7771 16036 2 0 97 0 0 0 0 7231268 52196 506404 0 0 0 0 7782 16202 6 0 94 0 1 0 0 7231212 52196 506404 0 0 0 0 7457 15622 4 0 96 0 0 0 0 7231212 52196 506404 0 0 0 0 7573 16045 2 0 98 0 2 0 0 7231216 52196 506404 0 0 0 0 7689 16076 6 0 94 0 0 0 0 7231424 52196 506404 0 0 0 0 7429 15650 4 0 95 0 3 0 0 7231424 52196 506404 0 0 0 0 7534 16168 3 0 97 0 1 0 0 7230548 52196 506404 0 0 0 0 8559 15926 7 1 92 0 0 0 0 7230672 52196 506404 0 0 0 0 7720 15905 2 0 98 0 0 0 0 7230548 52196 506404 0 0 0 0 7677 16313 5 0 95 0 1 0 0 7230676 52196 506404 0 0 0 0 7209 15432 5 0 95 0 0 0 0 7230800 52196 506404 0 0 0 0 7522 15861 2 0 98 0 0 0 0 7230552 52196 506404 0 0 0 0 7760 16661 5 0 95 0 In the munin(monitoring system) graphs I see(before server hung): Disk(nbd0) IOs per device: read: 289m but avg by week 2.09m Disk(nbd0) throughput per device: read: 4.73k but avg by week 108.76 Disk(nbd0) utilization per device: 100% but avg by week 1.2% Eth0 traffic was low: in/out only 2Mbps Number of threads increased to 566 usually 392 Fork rate 1.08 but usually 2.82 VMStat(processes state) Increased to 17.77(from 0 as far as I could see in the graph) CPU usage iowait 880.46% when usually 6.67% It'll be great if somebody help me to understand what's up.

    Read the article

  • How to open a server port outside of an OpenVPN tunnel with a pf firewall on OSX (BSD)

    - by Timbo
    I have a Mac mini that I use as a media server running XBMC and serves media from my NAS to my stereo and TV (which has been color calibrated with a Spyder3Express, happy). The Mac runs OSX 10.8.2 and the internet connection is tunneled for general privacy over OpenVPN through Tunnelblick. I believe my anonymous VPN provider pushes "redirect_gateway" to OpenVPN/Tunnelblick because when on it effectively tunnels all non-LAN traffic in- and outbound. As an unwanted side effect that also opens the boxes server ports unprotected to the outside world and bypasses my firewall-router (Netgear SRX5308). I have run nmap from outside the LAN on the VPN IP and the server ports on the mini are clearly visible and connectable. The mini has the following ports open: ssh/22, ARD/5900 and 8080+9090 for the XBMC iOS client Constellation. I also have Synology NAS which apart from LAN file serving over AFP and WebDAV only serves up an OpenVPN/1194 and a PPTP/1732 server. When outside of the LAN I connect to this from my laptop over OpenVPN and over PPTP from my iPhone. I only want to connect through AFP/548 from the mini to the NAS. The border firewall (SRX5308) just works excellently, stable and with a very high throughput when streaming from various VOD services. My connection is a 100/10 with a close to theoretical max throughput. The ruleset is as follows Inbound: PPTP/1723 Allow always to 10.0.0.40 (NAS/VPN server) from a restricted IP range >corresponding to possible cell provider range OpenVPN/1194 Allow always to 10.0.0.40 (NAS/VPN server) from any Outbound: Default outbound policy: Allow Always OpenVPN/1194 TCP Allow always from 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) OpenVPN/1194 UDP Allow always to 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) Block always from NAS to any On the Mini I have disabled the OSX Application Level Firewall because it throws popups which don't remember my choices from one time to another and that's annoying on a media server. Instead I run Little Snitch which controls outgoing connections nicely on an application level. I have configured the excellent OSX builtin firewall pf (from BSD) as follows pf.conf (Apple App firewall tie-ins removed) (# replaced with % to avoid formatting errors) ### macro name for external interface. eth_if = "en0" vpn_if = "tap0" ### wifi_if = "en1" ### %usb_if = "en3" ext_if = $eth_if LAN="{10.0.0.0/24}" ### General housekeeping rules ### ### Drop all blocked packets silently set block-policy drop ### all incoming traffic on external interface is normalized and fragmented ### packets are reassembled. scrub in on $ext_if all fragment reassemble scrub in on $vpn_if all fragment reassemble scrub out all ### exercise antispoofing on the external interface, but add the local ### loopback interface as an exception, to prevent services utilizing the ### local loop from being blocked accidentally. ### set skip on lo0 antispoof for $ext_if inet antispoof for $vpn_if inet ### spoofing protection for all interfaces block in quick from urpf-failed ############################# block all ### Access to the mini server over ssh/22 and remote desktop/5900 from LAN/en0 only pass in on $eth_if proto tcp from $LAN to any port {22, 5900, 8080, 9090} ### Allow all udp and icmp also, necessary for Constellation. Could be tightened. pass on $eth_if proto {udp, icmp} from $LAN to any ### Allow AFP to 10.0.0.40 (NAS) pass out on $eth_if proto tcp from any to 10.0.0.40 port 548 ### Allow OpenVPN tunnel setup over unprotected link (en0) only to VPN provider IPs ### and port ranges pass on $eth_if proto tcp from any to a.b.8.0/24 port 1194:1201 ### OpenVPN Tunnel rules. All traffic allowed out, only in to ports 4100-4110 ### Outgoing pings ok pass in on $vpn_if proto {tcp, udp} from any to any port 4100:4110 pass out on $vpn_if proto {tcp, udp, icmp} from any to any So what are my goals and what does the above setup achieve? (until you tell me otherwise :) 1) Full LAN access to the above ports on the mini/media server (including through my own VPN server) 2) All internet traffic from the mini/media server is anonymized and tunneled over VPN 3) If OpenVPN/Tunnelblick on the mini drops the connection, nothing is leaked both because of pf and the router outgoing ruleset. It can't even do a DNS lookup through the router. So what do I have to hide with all this? Nothing much really, I just got carried away trying to stop port scans through the VPN tunnel :) In any case this setup works perfectly and it is very stable. The Problem at last! I want to run a minecraft server and I installed that on a separate user account on the mini server (user=mc) to keep things partitioned. I don't want this server accessible through the anonymized VPN tunnel because there are lots more port scans and hacking attempts through that than over my regular IP and I don't trust java in general. So I added the following pf rule on the mini: ### Allow Minecraft public through user mc pass in on $eth_if proto {tcp,udp} from any to any port 24983 user mc pass out on $eth_if proto {tcp, udp} from any to any user mc And these additions on the border firewall: Inbound: Allow always TCP/UDP from any to 10.0.0.40 (NAS) Outbound: Allow always TCP port 80 from 10.0.0.40 to any (needed for online account checkups) This works fine but only when the OpenVPN/Tunnelblick tunnel is down. When up no connection is possbile to the minecraft server from outside of LAN. inside LAN is always OK. Everything else functions as intended. I believe the redirect_gateway push is close to the root of the problem, but I want to keep that specific VPN provider because of the fantastic throughput, price and service. The Solution? How can I open up the minecraft server port outside of the tunnel so it's only available over en0 not the VPN tunnel? Should I a static route? But I don't know which IPs will be connecting...stumbles How secure would to estimate this setup to be and do you have other improvements to share? I've searched extensively in the last few days to no avail...If you've read this far I bet you know the answer :)

    Read the article

  • Problems with Android Fragment back stack

    - by DexterMoon
    I've got a massive problem with the way the android fragment backstack seems to work and would be most grateful for any help that is offered. Imagine you have 3 Fragments [1] [2] [3] I want the user to be able to navigate [1] > [2] > [3] but on the way back (pressing back button) [3] > [1]. As I would have imagined this would be accomplished by not calling addToBackStack(..) when creating the transaction that brings fragment [2] into the fragment holder defined in XML. The reality of this seems as though that if I dont want [2] to appear again when user presses back button on [3], I must not call addToBackStack in the transaction that shows fragment [3]. This seems completely counter-intuitive (perhaps coming from the iOS world). Anyway if i do it this way, when I go from [1] > [2] and press back I arrive back at [1] as expected. If I go [1] > [2] > [3] and then press back I jump back to [1] (as expected). Now the strange behavior happens when I try and jump to [2] again from [1]. First of all [3] is briefly displayed before [2] comes into view. If I press back at this point [3] is displayed, and if I press back once again the app exits. Can anyone help me to understand whats going on here? And here is the layout xml file for my main activity: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent" android:orientation="vertical" > <fragment android:id="@+id/headerFragment" android:layout_width="match_parent" android:layout_height="wrap_content" class="com.fragment_test.FragmentControls" > <!-- Preview: layout=@layout/details --> </fragment> <FrameLayout android:id="@+id/detailFragment" android:layout_width="match_parent" android:layout_height="fill_parent" /> Update This is the code I'm using to build by nav heirarchy Fragment frag; FragmentTransaction transaction; //Create The first fragment [1], add it to the view, BUT Dont add the transaction to the backstack frag = new Fragment1(); transaction = getSupportFragmentManager().beginTransaction(); transaction.replace(R.id.detailFragment, frag); transaction.commit(); //Create the second [2] fragment, add it to the view and add the transaction that replaces the first fragment to the backstack frag = new Fragment2(); transaction = getSupportFragmentManager().beginTransaction(); transaction.replace(R.id.detailFragment, frag); transaction.addToBackStack(null); transaction.commit(); //Create third fragment frag = new Fragment3(); transaction = getSupportFragmentManager().beginTransaction(); transaction.replace(R.id.detailFragment, frag); transaction.commit(); //END OF SETUP CODE------------------------- //NOW: //Press back once and then issue the following code: frag = new Fragment2(); transaction = getSupportFragmentManager().beginTransaction(); transaction.replace(R.id.detailFragment, frag); transaction.addToBackStack(null); transaction.commit(); //Now press back again and you end up at fragment [3] not [1] Many thanks

    Read the article

  • Hard crash when drawing content for CALayer using quartz

    - by Lukasz
    I am trying to figure out why iOS crash my application in the harsh way (no crash logs, immediate shudown with black screen of death with spinner shown for a while). It happens when I render content for CALayer using Quartz. I suspected the memory issue (happens only when testing on the device), but memory logs, as well as instruments allocation logs looks quite OK. Let me past in the fatal function: - (void)renderTiles{ if (rendering) { //NSLog(@"====== RENDERING TILES SKIP ======="); return; } rendering = YES; CGRect b = tileLayer.bounds; CGSize s = b.size; CGFloat imageScale = [[UIScreen mainScreen] scale]; s.height *= imageScale; s.width *= imageScale; dispatch_async(queue, ^{ NSLog(@""); NSLog(@"====== RENDERING TILES START ======="); NSLog(@"1. Before creating context"); report_memory(); CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); NSLog(@"2. After creating color space"); report_memory(); NSLog(@"3. About to create context with size: %@", NSStringFromCGSize(s)); CGContextRef ctx = CGBitmapContextCreate(NULL, s.width, s.height, 8, 0, colorSpace, kCGImageAlphaPremultipliedLast); NSLog(@"4. After creating context"); report_memory(); CGAffineTransform flipTransform = CGAffineTransformMake(1.0, 0.0, 0.0, -1.0, 0.0, s.height); CGContextConcatCTM(ctx, flipTransform); CGRect tileRect = CGRectMake(0, 0, tileImageScaledSize.width, tileImageScaledSize.height); CGContextDrawTiledImage(ctx, tileRect, tileCGImageScaled); NSLog(@"5. Before creating cgimage from context"); report_memory(); CGImageRef cgImage = CGBitmapContextCreateImage(ctx); NSLog(@"6. After creating cgimage from context"); report_memory(); dispatch_sync(dispatch_get_main_queue(), ^{ tileLayer.contents = (id)cgImage; }); NSLog(@"7. After asgning tile layer contents = cgimage"); report_memory(); CGColorSpaceRelease(colorSpace); CGContextRelease(ctx); CGImageRelease(cgImage); NSLog(@"8. After releasing image and context context"); report_memory(); NSLog(@"====== RENDERING TILES END ======="); NSLog(@""); rendering = NO; }); } Here are the logs: ====== RENDERING TILES START ======= 1. Before creating context Memory in use (in bytes): 28340224 / 519442432 (5.5%) 2. After creating color space Memory in use (in bytes): 28340224 / 519442432 (5.5%) 3. About to create context with size: {6324, 5208} 4. After creating context Memory in use (in bytes): 28344320 / 651268096 (4.4%) 5. Before creating cgimage from context Memory in use (in bytes): 153649152 / 651333632 (23.6%) 6. After creating cgimage from context Memory in use (in bytes): 153649152 / 783159296 (19.6%) 7. After asgning tile layer contents = cgimage Memory in use (in bytes): 153653248 / 783253504 (19.6%) 8. After releasing image and context context Memory in use (in bytes): 21688320 / 651288576 (3.3%) ====== RENDERING TILES END ======= Application crashes in random places. Sometimes when reaching en of the function and sometime in random step. Which direction should I look for a solution? Is is possible that GDC is causing the problem? Or maybe the context size or some Core Animation underlying references?

    Read the article

  • CoreData: managedObjectContext not being created

    - by PruitIgoe
    I had to add core data to an existing project but I am having issues with the managedObjectContext... in prefix.pch I have this: #import <Availability.h> #ifndef __IPHONE_5_0 #warning "This project uses features only available in iOS SDK 5.0 and later." #endif #ifdef __OBJC__ #import <UIKit/UIKit.h> #import <Foundation/Foundation.h> #import <CoreData/CoreData.h> #endif ... in my appDelegate.h I have this: #import <UIKit/UIKit.h> #import "AppViewController.h" #import "DDLog.h" #import "DDASLLogger.h" #import "DDFileLogger.h" #import "DDTTYLogger.h" #import "KIP_LogManager.h" @interface AppDelegate : UIResponder <UIApplicationDelegate> { DDFileLogger* fileLogger; /*coredata*/ NSManagedObjectModel* managedObjectModel; NSManagedObjectContext* managedObjectContext; NSPersistentStoreCoordinator* persistentStoreCoordinator; } @property (strong, nonatomic) UIWindow *window; @property (strong, nonatomic) AppViewController* viewController; @property (readonly, strong, nonatomic) NSManagedObjectContext* managedObjectContext; @property (readonly, strong, nonatomic) NSManagedObjectModel* managedObjectModel; @property (readonly, strong, nonatomic) NSPersistentStoreCoordinator* persistentStoreCoordinator; - (void)setupLogging; - (NSString *)applicationDocumentsDirectory; in appDelegate.m this: @synthesize managedObjectContext = _managedObjectContext; @synthesize managedObjectModel = _managedObjectModel; @synthesize persistentStoreCoordinator = _persistentStoreCoordinator; ... - (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions { //establish lumberjack logging [self setupLogging]; DDLogVerbose(@"\n\n*********************\nNEW LOG SESSION\n**********************\n\n"); //set root view controller self.window = [[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]]; self.viewController = [[AppViewController alloc] init]; self.window.rootViewController = self.viewController; self.viewController.managedObjectContext = _managedObjectContext; return YES; } ... #pragma mark - CoreData Stack - (NSManagedObjectContext *)managedObjectContext { if (_managedObjectContext != nil) { return _managedObjectContext; } NSPersistentStoreCoordinator *coordinator = [self persistentStoreCoordinator]; if (coordinator != nil) { _managedObjectContext = [[NSManagedObjectContext alloc] init]; [_managedObjectContext setPersistentStoreCoordinator:coordinator]; } return _managedObjectContext; } // Returns the managed object model for the application. // If the model doesn't already exist, it is created from the application's model. - (NSManagedObjectModel *)managedObjectModel { if (_managedObjectModel != nil) { return _managedObjectModel; } NSURL *modelURL = [[NSBundle mainBundle] URLForResource:@"SPI_PAC" withExtension:@"momd"]; _managedObjectModel = [[NSManagedObjectModel alloc] initWithContentsOfURL:modelURL]; return _managedObjectModel; } - (NSPersistentStoreCoordinator *)persistentStoreCoordinator { if (persistentStoreCoordinator != nil) { return persistentStoreCoordinator; } NSMutableString* strDocsDirector = [[NSMutableString alloc] initWithString:[self applicationDocumentsDirectory]]; [strDocsDirector appendString:@"/SPI_PAC.sqlite"]; NSURL* storeURL = [NSURL URLWithString:strDocsDirector]; NSError *error = nil; persistentStoreCoordinator = [[NSPersistentStoreCoordinator alloc] initWithManagedObjectModel:[self managedObjectModel]]; if(![persistentStoreCoordinator addPersistentStoreWithType:NSSQLiteStoreType configuration:nil URL:storeURL options:nil error:&error]) { /*Error for store creation should be handled in here*/ } return persistentStoreCoordinator; } - (NSString *)applicationDocumentsDirectory { return [NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES) lastObject]; } in the view controller, viewDidLoad I am logging the passed managedObjectContext and am getting null returned. Obviously I am missing something but not sure what? In viewcontroller.h I have: @property (nonatomic, retain) NSManagedObjectModel* managedObjectModel; @property (nonatomic, retain) NSManagedObjectContext* managedObjectContext; @property (nonatomic, retain) NSPersistentStoreCoordinator* persistentStoreCoordinator; and in the viewcontroller.m: @synthesize managedObjectContext = managedObjectContext; ... DDLogVerbose(@"%@", managedObjectContext);

    Read the article

  • Losing data after reading them correct from file

    - by user1388172
    i have the fallowing class of object with a class a data structure which i use in main combined. The ADT(abstract data type) is a linked list. After i read from file the input data and create and object which at print looks just fine after a print. after i push_back() the 3-rd int variable get initializated to 0. So example and code: Example: ex.in: 1 7 31 2 2 2 3 3 3 now i create objects from each line, which at print look as they suppose, but after push_back(): 1 7 0 2 2 0 3 3 0 Class.h: class RAngle { private: int x,y,l,b; public: int solution,prec; RAngle(){ x = y = solution = prec = b = l =0; } RAngle(int i,int j,int k){ x = i; y = j; l = k; solution = 0; prec=0; b=0; } friend ostream& operator << (ostream& out, const RAngle& ra){ out << ra.x << " " << ra.y << " " << ra.l <<endl; return out; } friend istream& operator >>( istream& is, RAngle& ra){ is >> ra.x; is >> ra.y; is >> ra.l; return is ; } }; ADT.h: template <class T> class List { private: struct Elem { T data; Elem* next; }; Elem* first; T pop_front(){ if (first!=NULL) { T aux = first->data; first = first->next; return aux; } T a; return a; } void push_back(T data){ Elem *n = new Elem; n->data = data; n->next = NULL; if (first == NULL) { first = n; return ; } Elem *current; for(current=first;current->next != NULL;current=current->next); current->next = n; } Main.cpp(after i call this function in main which prints object as they suppose to be the x var(from RAngle class) changes to 0 in all cases.) void readData(List <RAngle> &l){ RAngle r; ifstream f_in; f_in.open("ex.in",ios::in); for(int i=0;i<10;++i){ f_in >> r; cout << r; l.push_back(r); }

    Read the article

  • OpenGL texture misaligned on quad

    - by user308226
    I've been having trouble with this for a while now, and I haven't gotten any solutions that work yet. Here is the problem, and the specifics: I am loading a 256x256 uncompressed TGA into a simple OpenGL program that draws a quad on the screen, but when it shows up, it is shifted about two pixels to the left, with the cropped part appearing on the right side. It has been baffling me for the longest time, people have suggested clamping and such, but somehow I think my problem is probably something really simple, but I just can't figure out what it is! Here is a screenshot comparing the TGA (left) and how it appears running in the program (right) for clarity. Also take note that there's a tiny black pixel on the upper right corner, I'm hoping that's related to the same problem. Here's the code for the loader, I'm convinced that my problem lies in the way that I'm loading the texture. Thanks in advance to anyone who can fix my problem. bool TGA::LoadUncompressedTGA(char *filename,ifstream &texturestream) { cout << "G position status:" << texturestream.tellg() << endl; texturestream.read((char*)header, sizeof(header)); //read 6 bytes into the file to get the tga header width = (GLuint)header[1] * 256 + (GLuint)header[0]; //read and calculate width and save height = (GLuint)header[3] * 256 + (GLuint)header[2]; //read and calculate height and save bpp = (GLuint)header[4]; //read bpp and save cout << bpp << endl; if((width <= 0) || (height <= 0) || ((bpp != 24) && (bpp !=32))) //check to make sure the height, width, and bpp are valid { return false; } if(bpp == 24) { type = GL_RGB; } else { type = GL_RGBA; } imagesize = ((bpp/8) * width * height); //determine size in bytes of the image cout << imagesize << endl; imagedata = new GLubyte[imagesize]; //allocate memory for our imagedata variable texturestream.read((char*)imagedata,imagesize); //read according the the size of the image and save into imagedata for(GLuint cswap = 0; cswap < (GLuint)imagesize; cswap += (bpp/8)) //loop through and reverse the tga's BGR format to RGB { imagedata[cswap] ^= imagedata[cswap+2] ^= //1st Byte XOR 3rd Byte XOR 1st Byte XOR 3rd Byte imagedata[cswap] ^= imagedata[cswap+2]; } texturestream.close(); //close ifstream because we're done with it cout << "image loaded" << endl; glGenTextures(1, &texID); // Generate OpenGL texture IDs glBindTexture(GL_TEXTURE_2D, texID); glPixelStorei(GL_UNPACK_ALIGNMENT, 1); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT); glTexParameteri (GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT); glTexParameteri (GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri (GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexEnvf(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE); glTexImage2D(GL_TEXTURE_2D, 0, type, width, height, 0, type, GL_UNSIGNED_BYTE, imagedata); delete imagedata; return true; } //Public loading function for TGA images. Opens TGA file and determines //its type, if any, then loads it and calls the appropriate function. //Returns: TRUE on success, FALSE on failure bool TGA::loadTGA(char *filename) { cout << width << endl; ifstream texturestream; texturestream.open(filename,ios::binary); texturestream.read((char*)header,sizeof(header)); //read 6 bytes into the file, its the header. //if it matches the uncompressed header's first 6 bytes, load it as uncompressed LoadUncompressedTGA(filename,texturestream); return true; }

    Read the article

  • Push notification not received in ios5 device

    - by Surender Rathore
    I am sending push notification on device which has iOS 5.0.1, but notification is not received on iOS5 device. If i try to send notification on iOS4.3.3 device, it received on this device. My server is developed in c# and apple push notification certificate is used in .p12 format. My code to register the notification is - (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions { // Override point for customization after application launch. // Set the navigation controller as the window's root view controller and display. deviceToken = nil; self.window.rootViewController = self.navigationController; [self.window makeKeyAndVisible]; [[UIApplication sharedApplication] enabledRemoteNotificationTypes]; [[UIApplication sharedApplication] registerForRemoteNotificationTypes: UIRemoteNotificationTypeBadge | UIRemoteNotificationTypeSound | UIRemoteNotificationTypeAlert]; return YES; } - (void)application:(UIApplication *)application didRegisterForRemoteNotificationsWithDeviceToken:(NSData *)devToken { UIAlertView *alertView=[[UIAlertView alloc]initWithTitle:@"Succeeded in registering for APNS" message:@"Sucess" delegate:self cancelButtonTitle:@"Ok" otherButtonTitles:nil]; [alertView show]; [alertView release]; deviceToken = [devToken retain]; NSMutableString *dev = [[NSMutableString alloc] init]; NSRange r; r.length = 1; unsigned char c; for (int i = 0; i < [deviceToken length]; i++) { r.location = i; [deviceToken getBytes:&c range:r]; if (c < 10) { [dev appendFormat:@"0%x", c]; } else { [dev appendFormat:@"%x", c]; } } NSUserDefaults *def = [NSUserDefaults standardUserDefaults]; [def setObject:dev forKey:@"DeviceToken"]; [def synchronize]; NSLog(@"Registered for APNS %@\n%@", deviceToken, dev); [dev release]; } - (void)application:(UIApplication *)application didFailToRegisterForRemoteNotificationsWithError:(NSError *)error { NSLog(@"Failed to register %@", [error localizedDescription]); UIAlertView *alertView=[[UIAlertView alloc]initWithTitle:@"FAILED" message:@"Fail" delegate:self cancelButtonTitle:@"Ok" otherButtonTitles:nil]; [alertView show]; [alertView release]; deviceToken = nil; } - (void)application:(UIApplication *)application didReceiveRemoteNotification:(NSDictionary *)userInfo { NSLog(@"Recieved Remote Notification %@", userInfo); NSDictionary *aps = [userInfo objectForKey:@"aps"]; NSDictionary *alert = [aps objectForKey:@"alert"]; //NSString *actionLocKey = [alert objectForKey:@"action-loc-key"]; NSString *body = [alert objectForKey:@"body"]; // NSMutableArray *viewControllers = [NSMutableArray arrayWithArray:[self.navigationController viewControllers]]; // // if ([viewControllers count] > 2) { // NSRange r; // r.length = [viewControllers count] - 2; // r.location = 2; // [viewControllers removeObjectsInRange:r]; // // MapViewController *map = (MapViewController*)[viewControllers objectAtIndex:1]; // [map askDriver]; // } // // [self.navigationController setViewControllers:viewControllers]; // [viewControllers release]; //NewBooking,"BookingId",Passenger_latitude,Passenger_longitude,Destination_latitude,Destination_longitude,Distance,Time,comments NSArray *arr = [body componentsSeparatedByString:@","]; if ([arr count]>0) { MapViewController *map = (MapViewController*)[[self.navigationController viewControllers] objectAtIndex:1]; [map askDriver:arr]; [self.navigationController popToViewController:[[self.navigationController viewControllers] objectAtIndex:1] animated:YES]; } //NSString *sound = [userInfo objectForKey:@"sound"]; //UIAlertView *alertV = [[UIAlertView alloc] initWithTitle:actionLocKey // message:body delegate:nil // cancelButtonTitle:@"Reject" // otherButtonTitles:@"Accept", nil]; // // [alertV show]; // [alertV release]; } Can anyone help me out with this issue. Why notification received on iOS4.3 device but not on iOS5? Thank you very much!!! in advance

    Read the article

  • Calling fuctions of header file

    - by navinbecse
    i want to know the way i am calling the methods defined in windows.h from c++ program is correct or wrong.. when i tried to get the library files out of it, it is showing the errors saying that unresolved methods... i am using this for jni purpose... #define _WIN32_WINNT 0x0500 #include "keylogs.h" #include <fstream #include <windows.h using namespace std; ofstream out("C:\Users\402100\Desktop\keyloggerfile.txt", ios::out); LRESULT CALLBACK keyboardHookProc(int nCode, WPARAM wParam, LPARAM lParam) { PKBDLLHOOKSTRUCT p = (PKBDLLHOOKSTRUCT) (lParam); // If key is being pressed if (wParam == WM_KEYDOWN) { switch (p-vkCode) { // Invisible keys case VK_CAPITAL: out << ""; break; case VK_SHIFT: out << ""; break; case VK_LCONTROL: out << ""; break; case VK_RCONTROL: out << ""; break; case VK_INSERT: out << ""; break; case VK_END: out << ""; break; case VK_PRINT: out << ""; break; case VK_DELETE: out << ""; break; case VK_BACK: out << ""; break; case VK_SPACE: out << ""; break; case VK_RMENU: out << ""; break; case VK_LMENU: out << ""; break; case VK_LEFT: out << ""; break; case VK_RIGHT: out << ""; break; case VK_UP: out << ""; break; case VK_DOWN: out << ""; break; // Visible keys default: out << char(tolower(p->vkCode)); } } return CallNextHookEx(NULL, nCode, wParam, lParam); } JNIEXPORT void JNICALL Java_keylog_Main_CallerMethod(JNIEnv *env, jobject) { HINSTANCE hInstance=GetModuleHandle(0); HHOOK keyboardHook = SetWindowsHookEx( WH_KEYBOARD_LL, keyboardHookProc, hInstance, 0); MessageBox(NULL, "Press OK to stop logging.", "Information", MB_OK); out.close(); } int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nShowCmd) { // Set windows hook return 0; } The errors which i am getting is... file.obj : error LNK2019: unresolved external symbol _imp_CallNextHookEx@16 re ferenced in function "long __stdcall keyboardHookProc(int,unsigned int,long)" (? keyboardHookProc@@YGJHIJ@Z) file.obj : error LNK2019: unresolved external symbol _imp_MessageBoxA@16 refer enced in function "class std::basic_string,cl ass std::allocator __cdecl CallerMethod(void)" (?CallerMethod@@YA?AV?$ba sic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@XZ) file.obj : error LNK2019: unresolved external symbol _imp_SetWindowsHookExA@16 referenced in function "class std::basic_string,class std::allocator __cdecl CallerMethod(void)" (?CallerMethod@@YA? AV?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@XZ) c:\Users\402100\Desktop\oldfile.dll : fatal error LNK1120: 3 unresolved externals can any one help me please....

    Read the article

  • CodePlex Daily Summary for Saturday, June 12, 2010

    CodePlex Daily Summary for Saturday, June 12, 2010New ProjectsAdverTool (Advertisement tool): AdverTool is an online tool which integrates the most popular advertisement networks (such as Microsoft adCenter, Google AdWords, Yahoo! Search Mar...Authentication Configuration Tool for SharePoint: Helpful tools to automatically configure SharePoint 2007 and 2010 for forms based authentication and other authentication mechanisms.Bacicworx: A C# .Net 3.5 helper library containing functionality for compression, encryption, hashes, downloading, PayPal API, text analysis and generation, a...BlogEngine.Net iPhone Theme: A port of BETouch originally created by soundbbgBT UPnP Nat Library: This Library makes it extremly simple to add NAT upnp port forwarding to your .net applications. Developed in C# using .Net 4.0CheckBox & CheckBoxList Validators: These validators fill the much needed gap in the Asp.Net Server controlsDataFactories: The DataFactories project was created to provide a standardized interface to SSAS and MSSQL data. However, as it is implemented using the Abstract ...DVD Swarm: Converts unprotected DVD video & audio streams to H.264 with AAC/Vorbis.Frio IM: Frio IM - is cross protocol instant messenger.jiuyuan: jiuyuan management systemMGM: MyGroupManager is a simple graphical interface written in PowerShell that can be deployed to Active Directory users to simplify the managed of grou...MGR2010: This the MA thesis by Witold Stanik & Michał Sereja, PJWSTK.Nauplius.ActiveDirectory: Web-based Active Directory management.Partial rendering control using JQuery: This article show a web custom control that allows partial rendering using JQueryREG - The Random Entertainment Generator: A simple tool to make your mid up when you can't figure out what you want to do!Runes of Magic - Heilerrechner: Heilerrechner für die Heiler von Runes of Magic (www.runes.ofmagic.com)Semagsoft Calculator: Basic calculator for Windows XP, Vista and Windows 7.SO League Tables: SOLT: Stack Overflow League Tables. A fun little app that lets you compare your stack overflow performance for each month, relative to other member...Stacky StackApps .Net Client Library: StackApps is a REST API for which provides access to the stackoverflow.com family of websites. Stacky is a .net client for that API. Stacky current...TwitterDotNet: TwitterDotNet is a TwitterLibrary for .NET Framework.ValiVIN: VIN (Vehicle Identification Number) Validator Validate Vin NumberWorkLogger: Simple work hour logger in WPFNew ReleasesAdverTool (Advertisement tool): Official releases: Please visit http://advertool.org to access the complete source code and downloads.Authentication Configuration Tool for SharePoint: Auth Config Tool (WSS 3.0, MOSS 2007 version): This tool automates the setup of dual authentication web applications in SharePoint that use Windows Authentication and Forms Based Authentication....BlogEngine.Net iPhone Theme: Version 0.1: Original version 0.1 from soundbbgBraintree Client Library: Braintree-2.3.0: Return AvsErrorResponseCode, AvsPostalCodeResponseCode, AvsStreetAddressResponseCode, CurrencyIsoCode, CvvResponseCode with Transaction Return Cr...BT UPnP Nat Library: Bt_Upnp Nat Library Alpha: Alpha Release of the libraryCNZK Library: Silverlight Behaviors - Deep Zoom Tag Filter: Behavior library for Silverlight 4 containing a Deep Zoom Tag Filter Behavior. Sample at the Expression Gallery http://gallery.expression.microsof...Demina: Demina Binaries version 0.2: Updated binaries. This release contains all of the new features, including simple animation transitions.DTLoggedExec: 1.0.0.2: -Fixed a bug that prevented loading packages from SSIS Package Store -Added support for {filename} placeholder in both Data Flow Profiling and CSV ...DVD Swarm: v0.8.10.611: Initial release, mostly stable.Exchange 2010 RBAC Editor (RBAC GUI) - updated on 6/11/2010: RBAC Editor 0.9.5.1: now supports creating and editing Role Assignment Policies; rest of the stuff is the same - still a lot of way to go :) Please use email address i...Extend SmallBasic: Teaching Extensions v.021: Compatible with SmallBasic v0.9 Lame version of TicTacToe Added - more coming later.Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.1.1 GA Released: Hi, Today we are releasing Visifire 3.1.1 GA with the following features: * Logarithmic Axis * ShowIndicator() in Chart. * HideIndica...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.5.4 GA Released: Hi, Today we are releasing Visifire 3.1.1 GA with the following features: Logarithmic Axis ShowIndicator() in Chart. HideIndicator() in Chart...Keep Focused - an enhanced tool for Time Management using Pomodoro Technique: Release 0.3.1 Alpha: Release 0.3.1 Alpha Technical patch. The previous release 0.3 Alpha had some errors and missing features. It was probably not build from the source...Mesopotamia Experiment: Mesopotamia 1.2.96: Bug Fixes - Fixed duplicate cells being added on creating new cells via mutations - Fixed bug where organisms without IO synapses where getting ios...NLog - Advanced .NET Logging: Nightly Build 2010.06.11.001: Changes since the last build:No changes. Unit test results:Passed 243/243 (100%) Passed 243/243 (100%) Passed 267/267 (100%) Passed 269/269 (100%)...Partial rendering control using JQuery: JQuery Web Control V 1.0: This is the first release of the code. It includes the source code and a web application to see how it worksphpxw: Phpxw2.0: 框架目录说明 ./_mod 模块存放目录 ./phpxw/ 框架核心目录 ./phpxw/common/ 框架核心函数 ./phpxw/system/ 框架核心基础类存放目录 ./phpxw/userlib/ 用户继承类存放目录 ./temp...Questionable Content Screensaver: Questionable Content Screensaver: Should be pretty self explanatory, install the appropriate version for your computer (x64 or x86). Features Include Cache comics for offline viewi...Quick Performance Monitor: Version 1.4.1: Added option to change the 'minimum' maximum value visible on the graph at run-time. Also fixed a number of other bugs.Refix - .NET dependency management: Refix v0.1.0.82 ALPHA: This has now been run against a real life project to tease out some of the issues. While this remains alpha software, which you use at your own ris...Rhyduino - Arduino and Managed Code: Beta Release (v0.8.2): ContentsSample Project - Demonstrates basic functionality and is flooded with code comments, so it's capable of being used as a learning tool. It d...Runes of Magic - Heilerrechner: Rom_Heiler_0.1: Erste Version von "RoM Heilerrechner". .Net 4.0 Framework wird vorausgesetzt. Das erhälst du hier: http://www.microsoft.com/downloads/details.aspx?...Semagsoft Calculator: 2.0: new theme and bug fix'sSilverlight Reporting: Release 2: Updated to correct issue in report footer xaml, and to add support for a calculated report footer.Stacky StackApps .Net Client Library: Beta Preview: This is a beta preview to go along with the StackApps beta.TwitterDotNet: TwitterDotNet Library: first versionUnOfficial AW Wrapper dot Net: Aw Wrapper 1.0.0.0 (5.0): New Functions :DValiVIN: ValiVIN first release: First Iteration. METHODS: IsValid(string vin) - Checks if a string is a valid VIN (returns true or false) GetCheckSumValue(string vin) - Returns...VCC: Latest build, v2.1.30611.0: Automatic drop of latest buildViewModelSupport: ViewModelSupport 1.0: Version 1.0 More information: http://houseofbilz.net/archives/2010/05/08/adventures-in-mvvm-my-viewmodel-base/ http://houseofbilz.net/archives/201...VolgaTransTelecomClient: v.1.0.3.0: v.1.0.3.0WCF Client Generator: Version 0.9.3.19259: Changed: - Always generate full type names for parameters and return typesWCF Client Generator: Version 0.9.3.21153: Fixed: - Service contracts namespace generation Added: - Templates assembly code base read from configurationXen: Graphics API for XNA: Xen 2.0 ALPHA: This is a very early alpha for Xen 2.0. Please note: The documentation for this alpha has not been updated yet. Xen 2.0 is not backwards compatib...ZGuideTV.NET: ZGuideTV.NET 0.93: Vendredi 11 avril 2010 (ZGuideTV.NET bêta 9 build 0.93) - English below Ajout : - Classement du contenu dans la description (affichage légende si...Most Popular ProjectsCAML GeneratorSharePoint Geographic Data VisualizerDbIdiom for ADO.NET CorestudyDTSRun Job RunnerXBStudio.asp.net.automationSilverlight load on demand with MEFCloud Business ServicesSharePoint 2010 Taxonomy Import UtilitySTS Federation Metadata EditorMost Active ProjectsRhyduino - Arduino and Managed Codepatterns & practices – Enterprise LibraryjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog ModuleCommunity Forums NNTP bridgeCassandraemonBlogEngine.NETMediaCoder.NETMicrosoft Silverlight Media FrameworkAndrew's XNA Helpers

    Read the article

  • How did I get here? My route to Android, iPhone, Windows Phone 7, and interest in Mobile Devices

    - by Wallym
    I get asked all the time how/why I got interested in mobile and jumped on this fairly early.  I tend to give half answers because it wasn't just one thing that took me to mobile, but a whole host of separate ivents culminating in a specific event where I wasdoing market research in May/June 2008.  Let me throw out the events and the facts about me: I tend to like new, different, cool stuff.  I jumped on .NET early on.  I jumped on Ajax early on.  I don't jump on every new technology that comes down the road, I'm probably the only person on the planet that doesn't "get" MVC, though I acknowledge that a lot of people do and it solves a number of problems in the default settings of ASP.NET WebForms. I remember buying an early Windows CE device. It was interesting, but dang, this stylus thing sucks. After I lost my third stylus, i just gave up.  I got my first mobile phone in early 1999.  Reception was crappy, but I could see the value in being mobile. In 1999, I worked on a manufacturing systems project.  One piece of the projects was a set of handheld devices on the shop floor.  While the UI was a crappy DOS based, yes I said DOS as in Disk Operating System Version 6.22, I could see that the wireless world was a direction I wanted to be in. In 2000, Microsoft released the first public alpha of .NET.  Very cool stuff indeed.  One piece of the puzzle was a set of mobile controls for ASP.NET.  I build numerous test apps as well as mobile version using these mobile controls.  Now, the mobile UIs of the time were based on WML, which was crap. I could real all the analysis of mobile and read all about growth rates.  Now, you have to realize that growth rates can be impressive when dealing with small numbers, but I knew it was a comer. In our first book, I got talked out of mobile because of the line from the publisher "Wally, mobile doesn't sell." Blackberry was the dominant device of the mid 2000s.  Its users were referred to as "Crackberry addicts."  Unfortunately, the mobile development experience for native apps was crap and the web experience was fairly rough as well, but if they could get the ecosystem started, other phones and better blackberryies would come out.  I finally jumped into using a blackberry. Sometime around 2006, I heard "Wally, mobile doesn't sell" again.  Now, anyone that knows me knows that someone saying something like this to me means I'll keep trying it. The phones of the mid 2000s were moving to be more graphical, but there were too many that had this idea that they had to use a stylus.  Stylus suck.  They get lost too easily. I worked on a project in 2007 and 2008 for a startup trying to answer the question of "What is there to do where I am at?"  For some reason, they wanted to be tied to PCs.  As it became obvious that they were having problems, their investor asked us to do some market research and to figure out what the marketplace did want.  One of the important things that I figured out was the we lived in a mobile world and if you had a mobile app, it need to be on a mobile device, not tied to a desktop/laptop/netbook device.  If there was any single event, this was it - I was doing some market research and sat and talked to people in a bar/restaurant in Atlanta called "The Grove" on Lavista.  The consensus of the people that I talked to was that they wanted their data where ever they were at, laptop, pc, mobile, whereever. In 2007, Apple released the iPhone.  Wow, what an impressive device, even with all the problems of a 1st generation device.  I bought an iPod Touch 1st generation to understand touch better, one of the best decisions I ever made. I decided in late 2008, to make a move into cloud, for a number of reasons.  I was working on an example app.  In April, 2009, one of my friends at Microsoft said "don't mention my name with this, but you need an iPhone front end for this app."  How do you get on the iPhone.  Well, there are a number of ways including: ObjectiveC.  Its hard to teach an old dog new tricks, and this dog knows .NET, not ObjectiveC. HTML, web, javascript optimized interface.  yeah, this is possible. PhoneGap.  Now, this is interesting, take an html interface and get it to run on the iPhone, Android, Blackberry, and other platforms.  I thought that this way made the most sense for me until......... MonoTouch.  In May/June 2009, Novell announced a way for .NET/c# developers to write apps for the iPhone.  This is the way that made the most sense to me. Titanium by Appcelerator.  This is similar in concept to PhoneGap.  I haven't played with this much but do want to learn more about it. In July, 2009, I emailed one of my contacts at Wrox to see if they would be interested in a short MonoTouch ebook in their Wrox Blox format.  I fully expected another  response along the lines of "Wally, mobile doesn't sell."  The response I got was "Wally, iPhone is H O T, get started immediately, can you have this to me before Labor Day."  Not quite the response I expected.  Thankfully, we didn't make the Labor Day, first draft date. I kept pushing back because I had a feeling that things were not going to be quite as polished and feature rich as necessary.  After all, Novell doesn't have the resouces of Microsoft's developer division. The ebook shipped on November 30, 2009. On about December, 15, 2009, my editor emailed and said "Your ebook is selling really well, lets do a full book and it by March 1 so get started."  Thankfully, guys like Craig Dunn and Chris Hardy were interested along with Martin and Ror joinged us later on. I bought my wife an iPhone 3Gs in early 2010 to go along with all my iPod Touch devices. I tried to pretend in 2010 that I wasn't that interested in mobile and still had interest in the desktop technologies.  I love the technologies and continue to use them today, but that isn't where my interest is right now.  I'm just about all mobile all the time with my energies.  Our book shipped in the beginning of July, 2010 right in the middle of the Apple FUD.I've been looking at Mobile Web as a way around the AppStores and Apple FUD problems of 2010. With all the Apple self FUD, we became interested in Android.I went up to Dino Esposito at DevConnections in Las Vegas at introduced myself. I've always tried to keep up with what Dino has been doing. I was shocked, he wanted to meet me.  We must have talked for 1.5 hours. It was way more time than I deserved. If you get a chance, go and introduce yourself to Dino. He's a great guy. Microsoft released Windows Phone 7 in the Fall of 2010.  I'm not doing development on that platform at this time.  I think they have a very interesting user interface.  The devices are being positively reviewed.  For my purposes, the devices are limited at this point in time.  We'll see what 2011 brings as far as updates to the operating system.  I need multitasking/background processing and html5 in the browser. Add that as well as acceptance in the marketplace and I'll be more interested in the device. Obviosuly, I'm now working on a MonoDroid book . I own Android and iPhone/iOS devices.  I am currently working on some startup ideas and am exploring as much in that area as I can. For 2011, I'm planning on speaking at Android Developer's Conference (AnDevCon) and Mobile Connections.  I'm really excited about this. I have a couple of magazine articles coming out in 2011 on Android and iPhone development with the Mono technologies.is Mono "The Answer"? What's "The Question?" I think it will work for me.  It might work for you, it might not.  it depends on your situation.  Its the current horse that I am riding. I might find a better horse tomorrow. So, that's how I got here.  I'm in love with mobile.  Mobile native apps on the device as well as mobile web.  I'm into all this cool stuff.  Where are you at?

    Read the article

  • Windows 8 Will be Here Tomorrow; but Should Silverlight be Gone Today?

    - by andrewbrust
    The software industry lives within an interesting paradox. IT in the enterprise moves slowly and cautiously, upgrading only when safe and necessary.  IT interests intentionally live in the past.  On the other hand, developers, and Independent Software Vendors (ISVs) not only want to use the latest and greatest technologies, but this constituency prides itself on gauging tech’s future, and basing its present-day strategy upon it.  Normally, we as an industry manage this paradox with a shrug of the shoulder and musings along the lines of “it takes all kinds.”  Different subcultures have different tendencies.  So be it. Microsoft, with its Windows operating system (OS), can’t take such a laissez-faire view of the world though.  Redmond relies on IT to deploy Windows and (at the very least) influence its procurement, but it also relies on developers to build software for Windows, especially software that has a dependency on features in new versions of the OS.  It must indulge and nourish developers’ fetish for an early birthing of the next generation of software, even as it acknowledges the IT reality that the next wave will arrive on-schedule in Redmond and will travel very slowly to end users. With the move to Windows 8, and the corresponding shift in application development models, this paradox is certainly in place. On the one hand, the next version of Windows is widely expected sometime in 2012, and its full-scale deployment will likely push into 2014 or even later.  Meanwhile, there’s a technology that runs on today’s Windows 7, will continue to run in the desktop mode of Windows 8 (the next version’s codename), and provides absolutely the best architectural bridge to the Windows 8 Metro-style application development stack.  That technology is Silverlight.  And given what we now know about Windows 8, one might think, as I do, that Microsoft ecosystem developers should be flocking to it. But because developers are trying to get a jump on the future, and since many of them believe the impending v5.0 release of Silverlight will be the technology’s last, not everyone is flocking to it; in fact some are fleeing from it.  Is this sensible?  Is it not unprecedented?  What options does it lead to?  What’s the right way to think about the situation? Is v5.0 really the last major version of the technology called Silverlight?  We don’t know.  But Scott Guthrie, the “father” and champion of the technology, left the Developer Division of Microsoft months ago to work on the Windows Azure team, and he took his people with him.  John Papa, who was a very influential Redmond-based evangelist for Silverlight (and is a Visual Studio Magazine author), left Microsoft completely.  About a year ago, when initial suspicion of Silverlight’s demise reached significant magnitude, Papa interviewed Guthrie on video and their discussion served to dispel developers’ fears; but now they’ve moved on. So read into that what you will and let’s suppose, for the sake of argument, speculation that Silverlight’s days of major revision and iteration are over now is correct.  Let’s assume the shine and glimmer has dimmed.  Let’s assume that any Silverlight application written today, and that therefore any investment of financial and human resources made in Silverlight development today, is destined for rework and extra investment in a few years, if the application’s platform needs to stay current. Is this really so different from any technology investment we make?  Every framework, language, runtime and operating system is subject to change, to improvement, to flux and, yes, to obsolescence.  What differs from project to project, is how near-term that obsolescence is and how disruptive the change will be.  The shift from .NET 1.1. to 2.0 was incremental.  Some of the further changes were too.  But the switch from Windows Forms to WPF was major, and the change from ASP.NET Web Services (asmx) to Windows Communication Foundation (WCF) was downright fundamental. Meanwhile, the transition to the .NET development model for Windows 8 Metro-style applications is actually quite gentle.  The finer points of this subject are covered nicely in Magenic’s excellent white paper “Assessing the Windows 8 Development Platform.” As the authors of that paper (including Rocky Lhotka)  point out, Silverlight code won’t just “port” to Windows 8.  And, no, Silverlight user interfaces won’t either; Metro always supports XAML, but that relationship is not commutative.  But the concepts, the syntax, the architecture and developers’ skills map from Silverlight to Windows 8 Metro and the Windows Runtime (WinRT) very nicely.  That’s not a coincidence.  It’s not an accident.  This is a protected transition.  It’s not a slap in the face. There are few things that are unnerving about this transition, which make it seem markedly different from others: The assumed end of the road for Silverlight is something many think they can see.  Instead of being ignorant of the technology’s expiration date, we believe we know it.  If ignorance is bliss, it would seem our situation lacks it. The new technology involving WinRT and Metro involves a name change from Silverlight. .NET, which underlies both Silverlight and the XAML approach to WinRT development, has just about reached 10 years of age.  That’s equivalent to 80 in human years, or so many fear. My take is that the combination of these three factors has contributed to what for many is a psychologically compelling case that Silverlight should be abandoned today and HTML 5 (the agnostic kind, not the Windows RT variety) should be embraced in its stead.  I understand the logic behind that.  I appreciate the preemptive, proactive, vigilant conscientiousness involved in its calculus.  But for a great many scenarios, I don’t agree with it.  HTML 5 clients, no matter how impressive their interactivity and the emulation of native application interfaces they present may be, are still second-class clients.  They are getting better, especially when hardware acceleration and fast processors are involved.  But they still lag.  They still feel like they’re emulating something, like they’re prototypes, like they’re not comfortable in their own skins.  They are based on compromise, and they feel compromised too. HTML 5/JavaScript development tools are getting better, and will get better still, but they are not as productive as tools for other environments, like Flash, like Silverlight or even more primitive tooling for iOS or Android.  HTML’s roots as a document markup language, rather than an application interface, create a disconnect that impedes productivity.  I do not necessarily think that problem is insurmountable, but it’s here today. If you’re building line-of-business applications, you need a first-class client and you need productivity.  Lack of productivity increases your costs and worsens your backlog.  A second class client will erode user satisfaction, which is never good.  Worse yet, this erosion will be inconspicuous, rather than easily identified and diagnosed, because the inferiority of an HTML 5 client over a native one is hard to identify and, notably, doing so at this juncture in the industry is unpopular.  Why would you fault a technology that everyone believes is revolutionary?  Instead, user disenchantment will remain latent and yet will add to the malaise caused by slower development. If you’re an ISV and you’re coveting the reach of running multi-platform, it’s a different story.  You’ve likely wanted to move to HTML 5 already, and the uncertainty around Silverlight may be the only remaining momentum or pretext you need to make the shift.  You’re deploying many more copies of your application than a line-of-business developer is anyway; this makes the economic hit from lower productivity less impactful, and the wider potential installed base might even make it profitable. But no matter who you are, it’s important to take stock of the situation and do it accurately.  Continued, but merely incremental changes in a development model lead to conservatism and general lack of innovation in the underlying platform.  Periods of stability and equilibrium are necessary, but permanence in that equilibrium leads to loss of platform relevance, market share and utility.  Arguably, that’s already happened to Windows.  The change Windows 8 brings is necessary and overdue.  The marked changes in using .NET if we’re to build applications for the new OS are inevitable.  We will ultimately benefit from the change, and what we can reasonably hope for in the interim is a migration path for our code and skills that is navigable, logical and conceptually comfortable. That path takes us to a place called WinRT, rather than a place called Silverlight.  But considering everything that is changing for the good, the number of disruptive changes is impressively minimal.  The name may be changing, and there may even be some significance to that in terms of Microsoft’s internal management of products and technologies.  But as the consumer, you should care about the ingredients, not the name.  Turkish coffee and Greek coffee are much the same. Although you’ll find plenty of interested parties who will find the names significant, drinkers of the beverage should enjoy either one.  It’s all coffee, it’s all sweet, and you can tell your fortune from the grounds that are left at the end.  Back on the software side, it’s all XAML, and C# or VB .NET, and you can make your fortune from the product that comes out at the end.  Coffee drinkers wouldn’t switch to tea.  Why should XAML developers switch to HTML?

    Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110  | Next Page >