Search Results

Search found 17187 results on 688 pages for 'vpn connection'.

Page 106/688 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

  • iPhone always assigned wrong ip

    - by Ashley Ray
    for some reason most of the time my iPhone connects to the home network the ip address seems wrongly assigned as it 'loses connection' even even with strong reception. If I change the ip address to a static from 168.2.10 to 168.2.15 works fine until it appears to renew back to the prior. I am using a power-plug extender from the modem to router. Then have a laptop Printer playstation tv and another iPhone that always connect fine. The modem also has a crappy wireless which I haven't connected any devices to. I'm sure the forum will have a simple answer!

    Read the article

  • Laptop connects to other network but not to my home wireless

    - by Nilesh
    My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

    Read the article

  • Timeouts when connecting to SQL Server since installing SP1 for Windows 7

    - by Julien
    Hi, I just installed SP1 for windows 7 and I have severe performance degradation when connecting to SQL Server 2005 since then. Establishing connection takes more than 30 seconds while it's instantaneous on another computer. Firewall is disabled and I didn't make any change to the configuration. It happens both when trying to connect with a hostname and with an ip address. Everything else seems to be fine (for instance, I'm have no issue connecting to other computers with remote desktop) What can cause such a problem? Thanks in advance! Edit : uninstalling the SP1 solves the issue instantly.

    Read the article

  • impossible to connect.. days trying..

    - by dany
    I have a problem: I am on Debian. I configured my nic with a static ip (192.168.1.56). When I try to connect to a network, initially with ifconfig eth2 I get (correctly): eth2 inet addr:192.168.1.56 .... inet6 addr: fe80:221:ff:fe96:4598/64 but after a few seconds the 102.168.1.56 disappears and after some other seconds disappears the inet6 address too. When I press in the nm-applet it requires me the password but in the meantime it try to connect. At uni, the connection is a DHCP one. It works for the first few seconds but after it doesn't. Any possible solution? Here it is the relevant part of the syslog: (static ip configuration) http://pastebin.com/u3BPAsda

    Read the article

  • Does the password get sent in the clear when connecting to Sql-Server?

    - by Scott Chamberlain
    I was asked this today and I honestly did not know the answer. If you connect using a connection string without sspi to a server is there any way a 3rd party can intercept on the wire the password used to log in? "Data Source=MyServer;Initial Catalog=MyDatabase;User Id=sa;Password=CanThisBeSniffed;" I am not asking about MiTM attacks just someone listing on the same computer or on the same hub on the network with wireshark or something similar running. I fired up wireshark myself and did not see it in plain text but it could be a simple obfuscation or proper encryption, I just wanted to know which.

    Read the article

  • web browser not opening

    - by Hoss7811
    I had a virus adware on my desktop. I cleaned it using AVG. Now no browser will open, though the Internet connection is fine. When trying to open any browser I get a dialog box that says it can't find that location. This happens to all my browsers. I even downloaded firefox on my laptop and installed it on the desktop and still get the same response - Windows can't find the location. This all started when opening an email. I'm running Windows Vista

    Read the article

  • Is there a way to get att.net email to stay connected?

    - by Clay Shannon
    My att.net account at home (wireless connection) has been bad for the last several days: I have to hit F5 quite a few times to "unfreeze" it (I can read an email or two, then it freezes, etc.). At work (company LAN) it's even worse: I can connect to the site and see that I have email, but can't open any of the emails - and the screen constantly refreshes (every couple of seconds) with a "Connecting..." message. It apparently connects and disconnects over and over again, but never stays connected long enough to actually access the email. Is there a way either to fix this OR forward my att.net (from home) to my work email address (accessible via MS Outlook)? Or set it up from work using Outlook to pull in my att.net email? I have Outlook 2003 at work.

    Read the article

  • cannot at all find sql instance (while installing an asp.net app on IIS)

    - by giddy
    So I'm really not a DBA, I'm an app dev. I had to install my asp.net mvc3 app on my client's(a large company) IIS6 + Win2k3 machine, with absolutely no help from their sysadmins. The final problem now is SQL Server 2008 r2, after figuring out how to create a login from windows, my app and sqlcmd.exe always complains it cannot find a sql server instance!! I have all the sql services (in services.msc) running to Log On as the local system. I can login fine with SQL Server Management Studio with Windows Auth. I created my database, my asp.net app needs/uses windows auth. But for the love of God, whatever I do my app always complains it cannot find the instance. (Also tried running SQL CMD and it complains of the same thing too!) My data base connection string looks like this: Data Source=machinename\username;Initial Catalog=myDataStore;Integrated Security=True;MultipleActiveResultSets=True Machinename\user is the same thing that shows up on the sql server management studio login if I choose windows authentication right?

    Read the article

  • Laptop connects to other network but not to my home wireless

    - by Nilesh
    My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

    Read the article

  • Sharing internet through a wireless ad-hoc in Windows 7

    - by vzait
    I'm actually requesting a workaround to share a PPoE wired Internet connection between two laptops using wireless. I've tried sharing it the usual way... New Ad-hoc = Click turn On sharing = etc. I've tried changing all the settings I could find related to the two networks on both machines. Conclusion: Sometimes it works, sometimes it doesn't. Is it really buggy, or are my hands growing from the wrong place? I'm almost sure I'm not the only one having this kind of problem. What is the easiest/correct workaround ?

    Read the article

  • Connect two devices with ethernet

    - by mofle
    I have a MacBook Pro and I'm going to buy a Boxee Box. I have access to wireless internet, but it's slow and out of my control. So my question is, what is the best way for both devices to get internet access, and the Boxee Box to get SMB access to the Mac, when only the Mac is connected to the wireless internet? I'm thinking an ethernet cable from the Boxee Box to my Mac, and connection sharing on my Mac. Can you explain the setup, is there any configuring.

    Read the article

  • what is the best setting for using lighttpd on 8G ram?

    - by user39639
    I have running 8GB ram and 8 x Xeon 3361 system! What is the best setting for running simultaneous connection! What is the maximum? Is setting like this correct? server.max-keep-alive-requests = 0 server.max-keep-alive-idle = 10 server.max-read-idle = 60 server.max-write-idle = 60 server.event-handler = "linux-sysepoll" server.max-fds = 2048 fastcgi.server = ( ".php" = ( "localhost" = ( "socket" = "/tmp/php-fastcgi.socket", "bin-path" = "/usr/bin/php-cgi", "max-procs" = 20, "bin-environment" = ( "PHP_FCGI_CHILDREN" = "40", "PHP_FCGI_MAX_REQUESTS" = "800" ), "broken-scriptfilename" = "enable" ) ) ) please help me!

    Read the article

  • Auto logon to internet provider

    - by user31673
    We use wireless internet access. The wireless is secured and to get an IP address, you provide the right key. That is setup just fine. However, on top of that, the first time we access the internet, a browser page appears and we have to enter a password. then we have access to the internet for a period of time. How can the password step be automated? I also have a web-based printer that doesn't work (except via USB connection) because it can't get out to the web. I can't change the router settings. Is there anything I can do to get the printer working and automatic the access?

    Read the article

  • How to tell if any MySQL connections has been dropped or timed out?

    - by Continuation
    A client is using PHP to connect to MySQL. The PHP scripts and the MySQL database are located on 2 different Linux servers. He complained that database connections were being dropped or timed out and asked me to take a look. Is there any place in MySQL that can show me what and how many connections have been dropped or timed out? I looked into slow query log and didn't see anything. Any suggestions on how to diagnose this dropped/timed out database connection problem? Thanks EDIT: Slow query log is enabled in my.cnf: log-slow-queries=/var/log/mysql-slow-queries.log And when I do a mysql> show global status; I got: | Slow_queries | 11402347 | So there are a lot of slow queries. But the file /var/log/mysql-slow-queries.log doesn't exist. Why is that?

    Read the article

  • 2 workstations won't connect to most websites, but will connect to some

    - by Dean
    I have a very frustrating issue I wasn't able to solve: 2 workstations which are used by the same user are not able to connect to most websites receivin a timeout, however they will load some websites specificly from my country. They are able to get the website addresses via DNS. Both stations have their internet connection through a remote router. Other stations in the same LAN are connecting fine. Here's what I tried: Virus scan Renewing IPs Reseting the workstations Moving one workstation to a different RJ-45 in the wall Reseting the hub and switch Checking the hosts file DNS flush Nothing seems to help. I am preparing a CD with more AV tools to see if there's anything hiding on the stations. UPDATE: It was an incorrect configuration in "Internet Options". I configured the correct proxy and now it works.

    Read the article

  • Problem with Win7 connecting to Internet

    - by Lucas
    Hello, I have had Windows 7 for about a year now and for the first four months it worked perfectly. But for the last 8 months it has been horrible. It will connect to the Internet for about 5 minutes and then just lose connection. It will reconnect in about 5 minues but then it just keeps disconnecting. I ran a virus scan about 2 weeks ago and I found a Trojan on my PC which I removed and dealt with. It was fine after that but now for these last couple days it has been just as bad as before. I think a virus is causing this but I will read any suggestions and tips to help me solve this problem. Thank you. PC DETAILS: OS: WIndows 7 Home Premium 64-Bit- System Model: Aspire M5802- Processor: Intel Core 2 Quad CPU- Memory: 8192MB RAM- Graphics Card: NVIDIA GeForce GT 220

    Read the article

  • Computer connects to lan, but not the internet

    - by Jay
    I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

    Read the article

  • Problems with connecting to wireless network on windows 7

    - by Naveen
    I have a Dell laptop with Windows 7 (Home premium) 64 bit edition installed on it. I use a Wi-Fi router to browse the net. My problem is, I lose the network connection every 10 minutes or so. The network icon on the system tray shows the refresh icon and the status as "identifying network". The network is fine and works fine with my phone. I saw on the net this may be caused if I have enabled IPv6, so I disabled it but still problem persists. When I look at the event log I see the following entries: "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xXXXXXXXX. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." I have also installed VirtualBox(32 bit edition) on the laptop. Does anybody any solution to this?

    Read the article

  • What security changes are necessary when connecting DSL modem directly to PC instead of router?

    - by Mike B
    Windows XP I have a user with a single PC that was connected to the internet via a standard home router. The router is now having hardware-related issues and to save money, they're considering connecting the PC directly to the DSL modem since they don't need to share the internet connection or need wireless functionality. If they decide to do that, I'm concerned that this will introduce additional security concerns. Is the Windows Firewall sufficient and Microsoft Security Essentials sufficient for protecting a computer directly connected to a DSL Modem? Or is other security software needed here? Ideally, I'd like to avoid having third-party firewall software constantly bringing up alerts and asking them to approve everything. Also, just to clarify, their use cases are just internet browsing and email.

    Read the article

  • IPSec 2 hosts (preshared key) - network shares very slow

    - by LxFlip
    I'm testing a IPSec config between 2 hosts, using ipsec auth with preshared key, very simple configuration. (I want to start with a IPSec simple preshared key config, and then step up to a Certificate or kerberos...) The problem is: The connection is working but when accessing network file shares the first time it's very slow. On the same host i'm testing the shares, i have an IIS site running, and the performance seems very normal, fast. Does anybody know why does SMB shares are soo slow? Is there any ipsec policy options that should be tweaked? Thanks

    Read the article

  • MySQL max_user_connections

    - by Sheriffen
    We're releasing a site in a couple of weeks that has been developed on a local machine but now when were testing on dev server we get MySQL error 'max_user_connections'. We have talked to the host company (biggest in sweden) and they say that we don't close our connections properly. But the thing is that we user the EXACT same code on another host where it works. And I also added echo "closed"; in the database_close function so that now in the very bottom of very page there is "closed". To me this means that we do close the connection, anyone got any idea of what could be wrong? We connect through the PHP PDO function and closes it by setting it to 'null', all according to the manual.

    Read the article

  • [Closed] Oracle JDBC connection with Weblogic 10 datasource mapping, giving problem java.sql.SQLExce

    - by gauravkarnatak
    Oracle JDBC connection with Weblogic 10 datasource mapping, giving problem java.sql.SQLException: Closed Connection I am using weblogic 10 JNDI datasource to create JDBC connections, below is my config <?xml version="1.0" encoding="UTF-8"?> <jdbc-data-source xmlns="http://www.bea.com/ns/weblogic/90" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/920 http://www.bea.com/ns/weblogic/920.xsd"> <name>XL-Reference-DS</name> <jdbc-driver-params> <url>jdbc:oracle:oci:@abc.XL.COM</url> <driver-name>oracle.jdbc.driver.OracleDriver</driver-name> <properties> <property> <name>user</name> <value>DEV_260908</value> </property> <property> <name>password</name> <value>password</value> </property> <property> <name>dll</name> <value>ocijdbc10</value> </property> <property> <name>protocol</name> <value>oci</value> </property> <property> <name>oracle.jdbc.V8Compatible</name> <value>true</value> </property> <property> <name>baseDriverClass</name> <value>oracle.jdbc.driver.OracleDriver</value> </property> </properties> </jdbc-driver-params> <jdbc-connection-pool-params> <initial-capacity>1</initial-capacity> <max-capacity>100</max-capacity> <capacity-increment>1</capacity-increment> <test-connections-on-reserve>true</test-connections-on-reserve> <test-table-name>SQL SELECT 1 FROM DUAL</test-table-name> </jdbc-connection-pool-params> <jdbc-data-source-params> <jndi-name>ReferenceData</jndi-name> <global-transactions-protocol>OnePhaseCommit</global-transactions-protocol> </jdbc-data-source-params> </jdbc-data-source> When I run a bulk task where there are lots of connections made and closed, sometimes it gives connection closed exception for any of the task in the bulk task. Below is detailed exception' java.sql.SQLException: Closed Connection at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:207) at oracle.jdbc.driver.OracleStatement.ensureOpen(OracleStatement.java:3512) at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3265) at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3367) Any ideas?

    Read the article

  • Access Database connect C# local director

    - by Bomboe Cristian
    I want my connection to the database to be available all the time, so if i move the folder with the project, to an other computer, the connection to be made automaticaly. So, how can i change this connection: this.oleDbConnection1.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=\"C:\\Documents and Settings\\Cristi\\Do" + "cuments\\Visual Studio 2008\\Projects\\WindowsApplication3\\bd1.mdb\""; ??? It should read the project directory or something. I don't know. Any ideas? Thank You!

    Read the article

  • MVC: returning multiple results on stream connection to implement HTML5 SSE

    - by eddo
    I am trying to set up a lightweight HTML5 Server-Sent Event implementation on my MVC 4 Web, without using one of the libraries available to implement sockets and similars. The lightweight approach I am trying is: Client side: EventSource (or jquery.eventsource for IE) Server side: long polling with AsynchController (sorry for dropping here the raw test code but just to give an idea) public class HTML5testAsyncController : AsyncController { private static int curIdx = 0; private static BlockingCollection<string> _data = new BlockingCollection<string>(); static HTML5testAsyncController() { addItems(10); } //adds some test messages static void addItems(int howMany) { _data.Add("started"); for (int i = 0; i < howMany; i++) { _data.Add("HTML5 item" + (curIdx++).ToString()); } _data.Add("ended"); } // here comes the async action, 'Simple' public void SimpleAsync() { AsyncManager.OutstandingOperations.Increment(); Task.Factory.StartNew(() => { var result = string.Empty; var sb = new StringBuilder(); string serializedObject = null; //wait up to 40 secs that a message arrives if (_data.TryTake(out result, TimeSpan.FromMilliseconds(40000))) { JavaScriptSerializer ser = new JavaScriptSerializer(); serializedObject = ser.Serialize(new { item = result, message = "MSG content" }); sb.AppendFormat("data: {0}\n\n", serializedObject); } AsyncManager.Parameters["serializedObject"] = serializedObject; AsyncManager.OutstandingOperations.Decrement(); }); } // callback which returns the results on the stream public ActionResult SimpleCompleted(string serializedObject) { ServerSentEventResult sar = new ServerSentEventResult(); sar.Content = () => { return serializedObject; }; return sar; } //pushes the data on the stream in a format conforming HTML5 SSE public class ServerSentEventResult : ActionResult { public ServerSentEventResult() { } public delegate string GetContent(); public GetContent Content { get; set; } public int Version { get; set; } public override void ExecuteResult(ControllerContext context) { if (context == null) { throw new ArgumentNullException("context"); } if (this.Content != null) { HttpResponseBase response = context.HttpContext.Response; // this is the content type required by chrome 6 for server sent events response.ContentType = "text/event-stream"; response.BufferOutput = false; // this is important because chrome fails with a "failed to load resource" error if the server attempts to put the char set after the content type response.Charset = null; string[] newStrings = context.HttpContext.Request.Headers.GetValues("Last-Event-ID"); if (newStrings == null || newStrings[0] != this.Version.ToString()) { string value = this.Content(); response.Write(string.Format("data:{0}\n\n", value)); //response.Write(string.Format("id:{0}\n", this.Version)); } else { response.Write(""); } } } } } The problem is on the server side as there is still a big gap between the expected result and what's actually going on. Expected result: EventSource opens a stream connection to the server, the server keeps it open for a safe time (say, 2 minutes) so that I am protected from thread leaking from dead clients, as new message events are received by the server (and enqueued to a thread safe collection such as BlockingCollection) they are pushed in the open stream to the client: message 1 received at T+0ms, pushed to the client at T+x message 2 received at T+200ms, pushed to the client at T+x+200ms Actual behaviour: EventSource opens a stream connection to the server, the server keeps it open until a message event arrives (thanks to long polling) once a message is received, MVC pushes the message and closes the connection. EventSource has to reopen the connection and this happens after a couple of seconds. message 1 received at T+0ms, pushed to the client at T+x message 2 received at T+200ms, pushed to the client at T+x+3200ms This is not OK as it defeats the purpose of using SSE as the clients start again reconnecting as in normal polling and message delivery gets delayed. Now, the question: is there a native way to keep the connection open after sending the first message and sending further messages on the same connection?

    Read the article

  • Spring & Hibernate SessionFactory - recovery from a down server

    - by MJB
    So pre spring, we used version of HibernateUtil that cached the SessionFactory instance if a successful raw JDBC connection was made, and threw SQLException otherwise. This allowed us to recover from initial setup of the SessionFactory being "bad" due to authentication or server connection issues. We moved to Spring and wired things in a more or less classic way with the LocalSessionFactoryBean, the C3P0 datasource, and various dao classes which have the SessionFactory injected. Now, if the SQL server appears to not be up when the web app runs, the web app never recovers. All access to the dao methods blow up because a null sessionfactory gets injected. (once the sessionfactory is made properly, the connection pool mostly handles the up/down status of the sql server fine, so recovery is possible) Now, the dao methods are wired by default to be singletons, and we could change them to prototype. I don't think that will fix the matter though - I believe the LocalSessionFactoryBean is now "stuck" and caches the null reference (I haven't tested this yet, though, I'll shamefully admit). This has to be an issue that concerns people.

    Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >