Search Results

Search found 3106 results on 125 pages for 'installer'.

Page 107/125 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

  • Migrating WebLogic 10.3.0 to new host. Slow managed server startup times

    - by wadevondoom
    We are migrating our Blue Martini Commerce application (only supported on WebLogic 10.3.0) to a new host (Redhat 6.3 on a VMWare ESX vm). We are seeing extremely slow start up times for our managed server(s) that is basically 20x slower than our current production. As a for instance the Publish managed server takes ~30 - 45 seconds in current production and in the new environment it takes ~10 minutes. The setup uses the same domain structure and JVM as the current production environment. The same setup files are used. We use jdk1.6.0_33 on 64 bit architecture. We used the generic 64bit weblogic installer and used pack / unpack utilities to migrate the domain. The JAVA_OPTS to start this server are: "-d64 -Xms256m -Xmx512m -XX:PermSize=48m -XX:MaxPermSize=256m" The sysadmins have checked /etc/sysctl.conf and /etc/limits.conf to ensure we were not hitting some kind of process limit. As I am not sure what this managed server does from a Blue Martini perspective during the phase of startup I also had the DBA check to ensure that Oracle RAC (11.2.0.3) wasn't also hitting some kind of process limit or if there was a tns listener issue. The new host is quite a bit stricter with their server lock downs so there are a few differences.... Redhat 6.3 in new env, RH 5.7 in current SElinux is targeted in new env and disabled in current VM in new env and dedicated hardware in current iptables disabled in current. It was enabled in new prod but I had them disable it just in case I apologize for not being more specific. I am mostly hoping got some tips. I do not have the typical root access I would normally have in this environment. I am just hoping got a path forward. I did a few 'kill -3' to see if there are blocked threads and I got nadda. The service works for all intents and purposes it is just painfully slow. Thanks you all in advance for reading and best regards. Wade

    Read the article

  • What should I encrypt in Debian during install?

    - by ianfuture
    I have seen various guides and recommendations on web about how best to do this but nothing that clearly explains the best way and why. So I understand there is a need for part of Debian during install to be un-encrypted on its own partition to allow it to boot. Most info I have seen is call this /boot and set the boot flag. Next I believe the best approach is to create another partition out of all the rest of the disk space, encrypt this, then on top of that create a LVM and then within the LVM create my various partitions , name them , select size, and file system type. Can I include /swap in the encrypted LVM part ? Is this approach sound? If so what are the partitions I should use (this is going to be a minimal server install with a view to install as and when what I need for a dev server)? Finally how does the installer know what to put in each partition I define ? I appreciate there are more than one question but any help and suggestions would be appreciated. If further clarification is needed please mention in the comments . Thanks.. Ian

    Read the article

  • Browsers behaving very strangely/not working in Windows Vista SP 2

    - by Kim_guest
    Sorry, that I'm posting this as a guest, but I couldn't log in. Maybe you can help me. I had a virus and gave this inspiron 1525 laptop to a computer expert, who removed it. I think he reinstalled Windows, because when I got it back IE 7 was installed. So after 3 hours I installed SP 1, SP 2, IE 9 and Google Chrome. First when there was only SP 1 and IE 7 installed, I could only use Google in IE, and I had copy the links download links of the updates (Update center didn't work) over to Google Chrome to download it there, because I couldn't do that in IE. Now I can't use Google at all, but strangely Bing works. Also I can display certain pages, but not all (I could open StackExchange, but not the login page; that's why I'm posting this as a guest). Another strange thing is, that now a webpage either works in both browsers (I couldn't install Opera, because the installer says it can't download the files) or in none. It is a 32 Bit system. It would be nice if you could help! I hope I will be even able to post this question...

    Read the article

  • What is a suitable simple, open web server for Windows?

    - by alficles
    I'm looking for a dead simple web server for Windows. Load will not be high as it will be primarily serving binaries for a WPKG update service. It needs to serve the entire contents of a single folder over HTTP on a configurable (high) port. No CGI or other scripting is required, but it might be nice for future features. I started with Mongoose, since it doesn't even have an installation requirement (a very nice perk), but it fails to start when run as a service. (Technically, it acts as it's own installer.) I've investigated LighTPD as well, but it appears to be minimally (at best) tested on Windows. And naturally, I'm looking for something free. As in beer is good, but speech is better, as always. Edit: I didn't mention this initially, but non-tech people will be doing the install. They'll have whatever script I write for the install, but the goal is a simple system that is easy to troubleshoot. (I almost worded this question "What is the best...", but Serverfault rightly observed that that is a subjective question. And it's really not an optimization problem, any suitable solution will work. I just can't seem to find one for Windows.)

    Read the article

  • Unable to install .NET Framework 3.5 to my XP machine

    - by CptanPanic
    I have an application that requires .NET 3.5, but I can't install it. The installer quits saying "it has encoutered a problem during setup. If I look at some of the error logs in the tmp directory I see. Error occurred while initializing fusion. It seems that I have 2.0 SP1 installed. Any ideas how I can get it to work? I went through the temp directory and found these references to the error. Any ideas? [04/17/12,18:55:09] Microsoft .NET Framework 2.0a: [2] Error: Installation failed for component Microsoft .NET Framework 2.0a. MSI returned error code 1603 [04/17/12,18:55:27] WapUI: [2] DepCheck indicates Microsoft .NET Framework 2.0a is not installed. 04/19/12 19:08:48 DDSet_Status: Loading fusion.dll using LoadLibraryShim() 04/19/12 19:08:48 DDSet_Error: Error occurred while initializing fusion. Setup could not load fusion with LoadLibraryShim(). Error: 0x80131700 04/19/12 19:08:48 DDSet_Status: Loading fusion.dll using LoadLibraryShim() 04/19/12 19:08:48 DDSet_Error: Error occurred while initializing fusion. Setup could not load fusion with LoadLibraryShim(). Error: 0x80131700 MSI (s) (74!08) [19:08:48:062]: Product: Microsoft .NET Framework 2.0 Service Pack 1 -- Error 25007.Error occurred while initializing fusion. Setup could not load fusion with LoadLibraryShim(). Error: 0x80131700 Error 25007.Error occurred while initializing fusion. Setup could not load fusion with LoadLibraryShim(). Error: 0x80131700

    Read the article

  • How can I make a copy of a printer in Win7?

    - by hawbsl
    Has anyone been able to copy an existing printer in Win7? I know that we were able to do this in XP (not as a direct copy/paste, but by installing the printer twice) but in Win7 it doesn't seem to be possible. Googling the answer is hopeless because searching for "copy printer" or "duplicate printer" you get a bunch of posts about "printer copiers" or people complaining about duplicate printers getting created in the background (precisely what I'd like to be able to do) It'd be good to know how to do it in general, but if it depends on the printer type, then in our case we are trying to make a copy of an HP Laserjet. Tried installing from the CD - but the CD is too old for Win7 Tried installing via Add Printer and that seems to install the printer but it's marked with an error. Tried installing via the .exe installer from the HP site and that does result in a successful printer being installed, but it won't let you install the same printer twice (stalls on the "insert USB cable now" step - simply won't enable the greyed out "Next" button). The reason this is required is so that we can print to one to the feeder and to the tray separately.

    Read the article

  • How can I install .NET framework 3.5 on XP machines without internet connection?

    - by EricSchaefer
    I want to install .NET framework 3.5 on a couple of machines that do not have internet access. If I install the "no internet access"-package it still wants to download something. How can I figure out what is missing? Are there other installation packages? Edit: I would present screenshots but I cannot upload anything from here and the shots would be in german. So I present only the text translated back to english... Installing the "full redistributable package": At the bottom of the license agreement page it display this text: Size of download file: 67 MB Appoximate download time: 2h 44min (56KBit/s) 18min (512KBit/s) It shows the text even if I installed Windows Installer 3.1. After agreeing it displays the "Download and Installation Status"-Dialog with a progress bar labeled "Download:" and Status: Connection to server attempted (try X of 5). Total Download Status: 56MB/67MB I tried it in a VM with no network connection. It tries 5 times while the progress bar shows progress. Later the progress bar is labeled "Installation:". Even later it reports problems during setup and provides two buttons "Send Report Later" and "Don't Send". Now here it comes: "Setup completed" and "Microsoft .NET Framework 3.5 has been deinstalled successfully." (Emphasis is mine) "It is recommended to install current service packs and security updates. More information at Windows Update (link)." Edit2: Installed Service Pack 3, but still no success.

    Read the article

  • Setup ejabberd with SQL Server 2008

    - by wonster
    Here's what I have got so far. Windows 2008 Server 64 bit. Installed the latest version of ejabberd, ejabberd-2.1.8-windows-installer.exe. The windows service starts up fine but seems ineffective. However, using the start & stop scripts work. I am able to login to the admin page which so far doesn't seem that versatile. Opened up ports 5222, 5226 and 5280 for my workstation to talk to the server. I've got Spark and Jabbear Windows clients to register, login and instant message with multiple accounts using the server. After confirming that I've got the very basics working, I've decided to make use of SQL Server 2008 as the database. Reason? Mainly, I am very comfortable with SQL Server. I can deal with redundancy, failover, data analysis easily. Not sure if ejabberd's built in DB provides all that. Following the instructions from ejabberd's documentation, I setup a system DSN that points to another physical database. The DSN checks out fine. (Tried both Named Pipes and TCP/IP) Modified ejabberd.cfg. Commented line %%{auth_method, internal} and uncommented line {auth_method, odbc} Uncommented and modified {odbc_server, "DSN=ejabberd;UID=somelogin;PWD=somepassword"}. After making these changes, I restarted. No errors are found in the log files. The jabber clients are no longer able to register new accounts. I'm not sure where to look for errors besides the /logs/ folder as I'm new to all this. I am basically stuck here on step 5. Has anyone got this setup to work recently? Some of the posts I've found around are years old and of no help. I can't be the only one setting up ejabberd with MS SQL. Any help would be appreciated!

    Read the article

  • Desktop appliciations are unable to launch my browser in Windows 8 [migrated]

    - by Alex Ford
    I have a fresh copy of Windows 8 Pro installed from MSDN. I have Google Chrome installed (stable channel) and it is set as my default browser. I even went into Control Panel Default Programs to ensure that Chrome had all its defaults. When other desktop applications try to launch my browser they always fail. For example, while trying to install the Android SDK for Windows the installer accurately detected that I did not have the JDK installed. It provides a friendly button to visit java.oracle.com. When pressing this button, nothing happens at all. You can see that here: http://youtu.be/XXL8GhuWWg0 If it were only that application that was having issues I wouldn't think anything of it but I have been encountering similar issues all over the place. Probably the most irritating one is when visual studio has updates; clicking the update button does nothing. http://www.youtube.com/watch?v=zwd1mn3TId0 You can see in that screencast that Visual Studio is not able to launch the browser no matter what I click. The update button doesn't do anything and neither do the two links in the update's description. Any suggestions? I'm assuming it's a Windows issue since it is happening in multiple applications.

    Read the article

  • Debian grub2 update removed Windows boot option.

    - by Wrikken
    Since I updated grub to grub 2 I no longer get the option to boot to Windows (which is unfortunately sometimes necessary for proprietary MSIE browser plugins I need to use for work). Relevant /boot/grub/menu.lst portion: ### END DEBIAN AUTOMAGIC KERNELS LIST # This is a divider, added to separate the menu items below from the Debian # ones. title Other operating systems: root # This entry automatically added by the Debian installer for a non-linux OS # on /dev/hda1 title Windows NT/2000/XP root (hd0,0) savedefault makeactive chainloader +1 This however does not appear anymore. I do have some entries in /boot/grub/grub.cfg with entries like these: menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set e638c434-4884-412f-a141-2c194f881fae echo 'Loading Linux 2.6.32-5-amd64 ...' linux /boot/vmlinuz-2.6.32-5-amd64 root=UUID=e638c434-4884-412f-a141-2c194f881fae ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-5-amd64 } Do I have to alter that file? If so, what is the correct syntax for a Windows boot? If not, what could be the problem?

    Read the article

  • Microsoft Deployment Toolkit 2012 Error

    - by Jacob Schaer
    I just started with MDT2012 recently in hopes of eventually getting away with using Ghost to deploy all of our department computers. When I test deploy in VirtualBox, it deploys the OS properly, but stops because of a network driver failure (it gets the "could not allocate resources" issue). On physical hardware (Latitude E6500, Optiplex 980, and an older Latitude) it gets through the multicast and stops immediately after with: "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information" I've looked at the logs and never see anything really of note. Originally I was using DriverPacks from DriverPacks.net, but thinking it was a driver issue, I switched over to using Dell's cab driver packs. Still the same issue. I check and it did the HDD is all fine - it was properly partitioned, set to bootable, and was loaded with all the proper OS installer files. I'm using a flash drive to do the install - when I make changes to the deployment share I rebuild and copy the ISO to the drive, then use YUMI multiboot to start the ISO (probably irrelevant).

    Read the article

  • PCI configuration method error (Linux Kernel)

    - by user326580
    (I'm not sure if here is the best place for that question, so I will be pleased if anyone suggests me a more proper forum for that.) I'm trying to install Ubuntu 12.04.4 in a netbook (from an usb), but the kernel stops very early in initialization process. After two days of research, I've found that it boots with the parameter pci=conf2 but not with the default conf1 method. Nevertheless, after kernel boot, it seems that Ubuntu can't find usb devices and I'm not be able to install it. Trying with Debian, its a graphic installer and I found that the mouse isn't working neither.I think pci devices are not working. I tried about 50% of kernel pci boot options in the kernel-parameters file (in conjunction with the implicit default conf1) without luck. Any suggestions? PS: The problem is the same with kernel 2.6 or 3. (In Spanish) No estoy seguro si éste es el mejor lugar para esta pregunta, por lo cual estaré encantado si alguno me sugiere un mejor lugar para ella. Estoy intentando instalar Ubuntu 12.04.4 en una netbook (desde un usb), pero el kernel se detiene muy temprano en la inicialización. Después de dos días de investigar, encontré que arranca con el parámetro pci=conf2 pero no con método default conf1. Sin embargo después de que el kernel arranca, parece que Ubuntu no logra encontrar los dispositivos usb y no puedo instalar el sistema. Intentando con Debian y su instalador gráfico, encontré que el ratón tampoco funcionaba, así que pienso que los dispositivos pci no están funcionando. Intenté con aproximadamente el 50% de las opciones de arranque del kernel para pci (en conjunción con el método implícito conf1) sin suerte. Alguna idea? PS: El problema es el mismo con el kernel 2.6 o 3.

    Read the article

  • What should I encrypt in Debian during install?

    - by ianfuture
    I have seen various guides and recommendations on web about how best to do this but nothing that clearly explains the best way and why. So I understand there is a need for part of Debian during install to be un-encrypted on its own partition to allow it to boot. Most info I have seen is call this /boot and set the boot flag. Next I believe the best approach is to create another partition out of all the rest of the disk space, encrypt this, then on top of that create a LVM and then within the LVM create my various partitions , name them , select size, and file system type. Can I include /swap in the encrypted LVM part ? Is this approach sound? If so what are the partitions I should use (this is going to be a minimal server install with a view to install as and when what I need for a dev server)? Finally how does the installer know what to put in each partition I define ? I appreciate there are more than one question but any help and suggestions would be appreciated. If further clarification is needed please mention in the comments . EDIT : 16/3/2010 After Richard Holloways reply I thought it relevant to add this info: The reasons why I want to do this are to explore maximising security on any server install and set up, due to interest in the area of Computer Security and Forensics. Also I am trying to peform the task as if it being performed in an enterprise situation. On a technical matter, once set up and configured with minimal packages and ssh this server will not physically be easy to access so I will only be entering via ssh. (Yes I know why encrypt something no one will ever be able to get their hands on? Because I can and I want to is the simple answer, but see above too).

    Read the article

  • How to flash Dell Precision 390 from linux (debian)

    - by malat
    I am trying to update my BIOS: $ sudo dmidecode -s bios-version 2.1.2 With a newer one: 2.6.0. I went to this page Dell Precision System BIOS, 2.6.0 After downloading the file WS390-020600.BIN, here is what it states: $ ./WS390-020600.BIN --help Usage: WS390-020600.BIN [options] Options: --help Print this text. --version Print package versions. If no options, update the BIOS. and $ ./WS390-020600.BIN --version Dell BIOS Update Installer 1.2 Copyright 2006 Dell Inc. All Rights Reserved. ./WS390-020600.BIN: 60: ./WS390-020600.BIN: ./flash: not found Does anyone knows where this flash command can be found ? Update: it looks like this is a self-extracting archive (need bash as per comment in header). $ head -30 WS390-020600.BIN [...] Extract() { tail -n +`awk '/^__ARC__/ { print NR + 1; exit 0; }' $0` $0 | gzip -cd >$_PRG So the flash command should have been auto-generated, however the above command does not appear to be running as original author intended. I do not see anything wrong with the command though.

    Read the article

  • File corruption (bad checksums) in large files copied to VMware guest

    - by AllanA
    In setting up a development lab, I've got a desktop system running ESXi 4.1.0 (free license) on SATA RAID 0 (already purchased and configured when I started this job; I'm open to hardware input as it pertains to my problem.) Its guests so far include two Win2008 Server R2 64-bit VMs and on Ubuntu 10.04 64-bit VM. I'm installing onto the Windows servers. We've been copying off some fairly large files (over a gigabyte) for an installation, hoping to install more quickly from a (virtual) hard drive than from the network for from BD-ROM. The problem is that they keep coming up with different checksums from the originals. The file sizes are the same, but md5sum reports different numbers (and so does the installer, as it refuses to continue when the checksums don't match.) I've tried copying directly from the BD-ROM (attaching the OS drive to the host system's physical drive). I've tried copying the large files onto a co-worker's Windows machine from his Blu-Ray drive; when I do that, the checksums match. But when I copy from his machine to the VM guest over a network share, the checksums no longer match. Thinking this meant a corrupt destination drive, I deleted it in vSphere and added another freshly created drive. The problem persists. I'm not sure what to try next.

    Read the article

  • Fans still running after shutdown after upgrade to Windows 8

    - by docaholic
    I'm running into a really annoying issue after upgrading from Windows 7 to Windows 8. I first noticed it during the initial (clean) install; when the installer tried to reboot, my machine (an acer aspire 4755G) just hung after the initial shutdown. That is, after the screen turns off, the power lights and fans are still running, and the machine itself doesn't restart. (I let it sit for a good 15 minutes, and it still didn't change) I managed to do a hard reset (power button for 5 seconds) and the install finished, but every shutdown/restart has been like that. Interestingly enough, hibernate works just fine. I've looked at other solutions where it said to use the bcdedit /set disabledynamictick yes and that didn't work. I also turned off the "Fast Boot" option in the power settings menu. That didn't work either. So far, the only option is to do the hard shut down by holding down the power button, but that proves to be horribly inconvenient. Any ideas on what's going on here?

    Read the article

  • Unable to mount iso as dvd drive in VMware Fusion 6

    - by John O
    I have a newer iMac without an optical drive and some DVDs that I needed to run software off of. This software will have you juggle discs to read data off of them, and the data can't simply be copied to the machine's drive. I used a windows machine to make ISOs of these DVDs. And the first disc, the installer, it will mount in VMware and let you install the software. It then asks for the other discs, and these won't mount as ISOs. If I mount them as drive images, they'll show up on the iMac's and I have access to all the files. But if I try to mount them as the dvd drive through Fusion, nothing happens. For that matter, I'm unable to attempt it a second time, as Fusion believes that the there is already an iso mounted as the dvd, while nothing has happened as far as the guest OS is concerned. drutil eject will allow me to eject the ghost/non-existent dvd, at which point I can make a second (equally futile) attempt. Does anyone have an explanation for this behavior? How can the ISO be valid enough to mount as a drive image, but not valid enough for Fusion to mount it as if it were a dvd?

    Read the article

  • Oracle Linux screen freezes during installation

    - by Fearless
    I was installing Oracle Linux 6.4 on a server, and the screen suddenly froze. Here were the previous steps: I put in the disk, clicked install, checked the disk (no errors), did pre-install setup (clock, root password, host+domain name, etc.), configured two 40GB hard drives in a RAID1 array (no swap, 3100mb encrypted raid partitions, ~100mb ext4 partition mounting to /boot, encrypted ext4 RAID device with mounting to /), selected packages, hit continue. The system did its short preinstall processes, then when to the main installation screen with the long status bar. The installer proceeded like always, but around package 250 out of ~1000, the screen suddenly went black with a text cursor in the upper left corner of the screen and the mouse cursor in its previous place. Neither cursor moved and the only thing that triggered a response was a ctrl-alt-delete that rebooted it. I have run this in VMs before without this issue. Memtest hasn't reported anything, and the media check went smoothly. The machine has supported Ubuntu server without issues before. Any ideas? I have tried booting after that, but the grub bootloader tries to find fd0 for some reason (I have no idea why it would search for the floppy disk). UPDATE My server successfully installed, but won't boot up. I think that, for some reason, it is still using the old bootloader from the previous installation. Any ideas on how to fix that?

    Read the article

  • Removing Phantom Registry Entries

    - by shedd
    First, some background: I'm trying to install an HP OfficeJet 6500. I've got the printer setup on my network fine, but the driver software installation on Windows XP (SP3) is a PITA. The installation program keeps dying with the following error: Product: Network -- Error 1324. The folder path 'WD Sync Data' contains an invalid character. WD Sync Data is a program on external Western Digital harddrives, which I used to use on this computer, but no external drive is current mounted. I've searched my registry for those keywords, but haven't found anything. I also ran CCleaner on the registry just to make sure, but no loose ends detected there, either. There are a number of Google results for the error, but no solutions. One post pointed me to the Windows Installer Cleanup Utility, but this utility doesn't even run - it dies with the same error before even starting. Any thoughts on where I could look to clean up this invalid character so I can get the HP installation wizard to successfully run? Many thanks in advance!

    Read the article

  • Why is "start in" needed for Windows scheduled tasks?

    - by GomoX
    We develop a web application that can be deployed on Windows or Linux. The Linux implementation uses cron, and the Windows one uses scheduled tasks to run a single PHP script that processes all scheduled tasks for our system. The task is scheduled using schtasks during the install process, like: This has always worked both under W2003 and W2008. A week ago a customer reported that scheduled tasks were not running. He is running on Windows 2008. We checked over and over and finally solved the issue by entering the folder that contains the .vbs script as the "start in" folder for the scheduled task. This said, there is no way to set up the "start in..." value from schtasks without using an XML definition of the tasks. XML definitions don't work in Windows 2003, so I would have to add windows version detection to the installer, additional testing, etc (I'd like to avoid this if at all possible). The only atypical thing I noticed about the install is that the system is installed in D:\ as opposed to the default C:\Program Files (x86)\, but I don't see how this would matter. All the paths are absolute in all the scripts. Can anyone suggest a reasonable solution for this?

    Read the article

  • package manager cannot create users? installation script fails?

    - by RapidWebs
    It seems that when trying to install any package which requires the creation of a system User and Group, the installer fails with the error: install: invalid user 'username' When it happened the first time, I assumed it was related to the package, or it's installation script. But now I am attempting a different package, and alas, the same issue arises! note: /etc/passwd and /etc/group is not chattr -i Here is the example output from an attempted installation (of varnish): Selecting previously unselected package varnish. Unpacking varnish (from .../varnish_3.0.2-1ubuntu0.1_amd64.deb) ... Processing triggers for man-db ... Setting up libvarnishapi1 (3.0.2-1ubuntu0.1) ... Setting up varnish (3.0.2-1ubuntu0.1) ... install: invalid user `varnish' dpkg: error processing varnish (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: varnish note: running ubuntu 12.04 For now, I have resolved the issue by manually creating the users, and running apt-get install -f, but this does not resolve the actual issue. Any ideas?

    Read the article

  • solution for an offline server

    - by dashmug
    I'm trying to setup a development server at work that will ideally be able to test drive a couple of projects in PHP, Rails, or Django (not always running at the same time). I develop the apps locally on a Mac and then I'll put the projects up on this server for testing with my actual users (non-techies) before deploying to a production server. My problem is that we have a very poor internet connection (almost negligible) at work and doing the usual apt-get/yum/ports (make, clean, install) processes for setting up servers always get their packages from online repositories somewhere. I know I could probably download the source and then compile them myself but that's going to be too much of a hassle for me. I'm thinking about two solutions: Plan A: Run a server VM on my Mac and then use this VM as the source repository for the offline server. I've read about Ubuntu's apt-proxy and it seems to be good enough though I haven't tried it yet. I'm not sure if this is possible but can I simply do apt-get install nginx --downloadonly so that the package and its dependencies will be downloaded into my VM and my server can use the VM as the source repo for apt-get? Plan B: Run a server VM on my Mac (which I can setup/update easily when I'm home) and then clone the VM to the offline development server. Maybe I should simply make the server a VM host so I can simply copy the VM over. I think this is okay for the first-time setup but subsequent updates will take too long (cloning the VM image). If I was working on Windows, I imagine it'd be easier because most services have an installer file that I can download and then run at the server. If you could suggest another way, it would be much appreciated. Update: From Michael Hampton's answer, I found a possible solution which is apt-cacher. I also found this page on Ubuntu's website. I wonder if there is a better tool than this one.

    Read the article

  • Does "..." have meaning as a relative pathname? (EDIT: No.)

    - by Pup
    1. Is there a relative pathname/directory/folder meaning for the expression "..."? 2. What does "..." refer to in the context cited? I encountered the expression "..." when looking at the installation instructions for http://code.google.com/p/vim-win3264/wiki/Win64Binaries and it says the following (note bolded text): Unzip the zipfile into a directory whose name ends in vim, such as C:\Program Files\Vim, D:\vim, or C:\mytools\vim. This will create a vim72 subdirectory, containing all the files. Start a cmd.exe window, cd ...\vim\vim72, then run install.exe, the command-line installer. This will offer you a series of choices. You can probably just type d to "do it".`                                               Bonus points for listing all relative directory pathnames!

    Read the article

  • Safely transfer files from pc with internet connection to lan without allowing any other form of communication

    - by Hugh Quenneville
    In the company that I work there are computers that are connected to the Internet and computers that are connected to a Local Area Network. The LAN is considered a "safe zone" and the files that reside there should never be copied/moved to a computer that has Internet Access. So, now, if we want to download an installer for an application for example, we download it in a pc that has Internet Access and then move it using a "secure USB stick" to the Local Area Network. Is there a way to create an "safe, one-way connection" between a computer with Internet access and a computer from the LAN? This practically means that only files from the computer with the Internet access can be copied/moved to the LAN. In addition to that, if you want to transfer files you would have to provide your security credentials for the network (so, that only users with the appropriate access levels will be able to transfer files). Is it possible to create something like that and make it completely safe (or at least "equally safe" with the USB method that we currently use) or the fact that the computer with Internet access is connected with a wire to the LAN is a security risk by itself? NOTE: the LAN setup involves 2 Windows 2003 servers with Active Directory, Web servers and pretty much all the services that you would expect to find in a Windows network.

    Read the article

  • Trouble Starting MySL Community Server on Windows 7

    - by CodeAngel
    I have installed Netbeans 7 on my Windows 7. In addition, the MySQL Community Server 5.6.12 is installed with the MSI installer on thesame 7 PC. The MySQL server is integrated with the Netbeans IDE. However , it is not possible to start or stop the MySQL server from the command prompt or the Netbeans IDE. I am only able to start or stop the server from the Windows 7 services tool. Also , it is difficult running SQL queries from the Netbeans IDE even though it shows there is connection with the MySQL server. I have added the my.ini file to the installed directory of the MySQL server , that is : C:\Program Files\MySQL\MySQL Server 5.6 below is the my.ini file : # For advice on how to change settings please see # http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html # *** DO NOT EDIT THIS FILE. It's a template which will be copied to the # *** default location during install, and will be replaced if you # *** upgrade to a newer version of MySQL. [mysqld] # Remove leading # and set to the amount of RAM for the most important data # cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%. # innodb_buffer_pool_size = 128M # Remove leading # to turn on a very important data integrity option: logging # changes to the binary log between backups. # log_bin # These are commonly set, remove the # and set as required. # basedir = ..... # datadir = ..... port = 3306 # server_id = ..... # Remove leading # to set options mainly useful for reporting servers. # The server defaults are faster for transactions and fast SELECTs. # Adjust sizes as needed, experiment to find the optimal values. # join_buffer_size = 128M # sort_buffer_size = 2M # read_rnd_buffer_size = 2M sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES Any suggestion is welcomed.

    Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >