Search Results

Search found 2872 results on 115 pages for 'packet injection'.

Page 107/115 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

• translating specifications into query predicates

  - by Jeroen

  I'm trying to find a nice and elegant way to query database content based on DDD "specifications". In domain driven design, a specification is used to check if some object, also known as the candidate, is compliant to a (domain specific) requirement. For example, the specification 'IsTaskDone' goes like: class IsTaskDone extends Specification<Task> { boolean isSatisfiedBy(Task candidate) { return candidate.isDone(); } } The above specification can be used for many purposes, e.g. it can be used to validate if a task has been completed, or to filter all completed tasks from a collection. However, I want to re-use this, nice, domain related specification to query on the database. Of course, the easiest solution would be to retrieve all entities of our desired type from the database, and filter that list in-memory by looping and removing non-matching entities. But clearly that would not be optimal for performance, especially when the entity count in our db increases. Proposal So my idea is to create a 'ConversionManager' that translates my specification into a persistence technique specific criteria, think of the JPA predicate class. The services looks as follows: public interface JpaSpecificationConversionManager { <T> Predicate getPredicateFor(Specification<T> specification, Root<T> root, CriteriaQuery<?> cq, CriteriaBuilder cb); JpaSpecificationConversionManager registerConverter(JpaSpecificationConverter<?, ?> converter); } By using our manager, the users can register their own conversion logic, isolating the domain related specification from persistence specific logic. To minimize the configuration of our manager, I want to use annotations on my converter classes, allowing the manager to automatically register those converters. JPA repository implementations could then use my manager, via dependency injection, to offer a find by specification method. Providing a find by specification should drastically reduce the number of methods on our repository interface. In theory, this all sounds decent, but I feel like I'm missing something critical. What do you guys think of my proposal, does it comply to the DDD way of thinking? Or is there already a framework that does something identical to what I just described?

  Read the article

• Objective-c design advice for use of different data sources, swapping between test and live

  - by user200341

  I'm in the process of designing an application that is part of a larger piece of work, depending on other people to build an API that the app can make use of to retrieve data. While I was thinking about how to setup this project and design the architecture around it, something occurred to me, and I'm sure many people have been in similar situations. Since my work is depending on other people to complete their tasks, and a test server, this slows work down at my end. So the question is: What's the best practice for creating test repositories and classes, implementing them, and not having to depend on altering several places in the code to swap between the test classes and the actual repositories / proper api calls. Contemplate the following scenario: GetDataFromApiCommand *getDataCommand = [[GetDataFromApiCommand alloc]init]; getDataCommand.delegate = self; [getDataCommand getData]; Once the data is available via the API, "GetDataFromApiCommand" could use the actual API, but until then a set of mock data could be returned upon the call of [getDataCommand getData] There might be multiple instances of this, in various places in the code, so replacing all of them wherever they are, is a slow and painful process which inevitably leads to one or two being overlooked. In strongly typed languages we could use dependency injection and just alter one place. In objective-c a factory pattern could be implemented, but is that the best route to go for this? GetDataFromApiCommand *getDataCommand = [GetDataFromApiCommandFactory buildGetDataFromApiCommand]; getDataCommand.delegate = self; [getDataCommand getData]; What is the best practices to achieve this result? Since this would be most useful, even if you have the actual API available, to run tests, or work off-line, the ApiCommands would not necessarily have to be replaced permanently, but the option to select "Do I want to use TestApiCommand or ApiCommand". It is more interesting to have the option to switch between: All commands are test and All command use the live API, rather than selecting them one by one, however that would also be useful to do for testing one or two actual API commands, mixing them with test data. EDIT The way I have chosen to go with this is to use the factory pattern. I set up the factory as follows: @implementation ApiCommandFactory + (ApiCommand *)newApiCommand { // return [[ApiCommand alloc]init]; return [[ApiCommandMock alloc]init]; } @end And anywhere I want to use the ApiCommand class: GetDataFromApiCommand *getDataCommand = [ApiCommandFactory newApiCommand]; When the actual API call is required, the comments can be removed and the mock can be commented out. Using new in the message name implies that who ever uses the factory to get an object, is responsible for releasing it (since we want to avoid autorelease on the iPhone). If additional parameters are required, the factory needs to take these into consideration i.e: [ApiCommandFactory newSecondApiCommand:@"param1"]; This will work quite well with repositories as well.

  Read the article

• How can I send multiple types of objects across Protobuf?

  - by cyclotis04

  I'm implementing a client-server application, and am looking into various ways to serialize and transmit data. I began working with Xml Serializers, which worked rather well, but generate data slowly, and make large objects, especially when they need to be sent over the net. So I started looking into Protobuf, and protobuf-net. My problem lies in the fact that protobuf doesn't sent type information with it. With Xml Serializers, I was able to build a wrapper which would send and receive any various (serializable) object over the same stream, since object serialized into Xml contain the type name of the object. ObjectSocket socket = new ObjectSocket(); socket.AddTypeHandler(typeof(string)); // Tells the socket the types socket.AddTypeHandler(typeof(int)); // of objects we will want socket.AddTypeHandler(typeof(bool)); // to send and receive. socket.AddTypeHandler(typeof(Person)); // When it gets data, it looks for socket.AddTypeHandler(typeof(Address)); // these types in the Xml, then uses // the appropriate serializer. socket.Connect(_host, _port); socket.Send(new Person() { ... }); socket.Send(new Address() { ... }); ... Object o = socket.Read(); Type oType = o.GetType(); if (oType == typeof(Person)) HandlePerson(o as Person); else if (oType == typeof(Address)) HandleAddress(o as Address); ... I've considered a few solutions to this, including creating a master "state" type class, which is the only type of object sent over my socket. This moves away from the functionality I've worked out with Xml Serializers, though, so I'd like to avoid that direction. The second option would be to wrap protobuf objects in some type of wrapper, which defines the type of object. (This wrapper would also include information such as packet ID, and destination.) It seems silly to use protobuf-net to serialize an object, then stick that stream between Xml tags, but I've considered it. Is there an easy way to get this functionality out of protobuf or protobuf-net? I've come up with a third solution, and posted it below, but if you have a better one, please post it too!

  Read the article

• Design patterns and interview question

  - by user160758

  When I was learning to code, I read up on the design patterns like a good boy. Long after this, I started to actually understand them. Design discussions such as those on this site constantly try to make the rules more and more general, which is good. But there is a line, over which it becomes over-analysis starts to feed off itself and as such I think begins to obfuscate the original point - for example the "What's Alternative to Singleton" post and the links contained therein. http://stackoverflow.com/questions/1300655/whats-alternative-to-singleton I say this having been asked in both interviews I’ve had over the last 2 weeks what a singleton is and what criticisms I have of it. I have used it a few times for items such as user data (simple key-value eg. last file opened by this user) and logging (very common i'm sure). I've never ever used it just to have what is essentially global application data, as this is clearly stupid. In the first interview, I reply that I have no criticisms of it. He seemed disappointed by this but as the job wasn’t really for me, I forgot about it. In the next one, I was asked again and, as I wanted this job, I thought about it on the spot and made some objections, similar to those contained in the post linked to above (I suggested use of a factory or dependency injection instead). He seemed happy with this. But my problem is that I have used the singleton without ever using it in this kind of stupid way, which I had to describe on the spot. Using it for global data and the like isn’t something I did then realised was stupid, or read was stupid so didn’t do, it was just something I knew was stupid from the start. Essentially I’m supposed to be able to think of ways of how to misuse a pattern in the interview? Which class of programmers can best answer this question? The best ones? The medium ones? I'm not sure.... And these were both bright guys. I read more than enough to get better at my job but had never actually bothered to seek out criticisms of the most simple of the design patterns like this one. Do people think such questions are valid and that I ought to know the objections off by heart? Or that it is reasonable to be able to work out what other people who are missing the point would do on the fly? Or do you think I’m at least partially right that the question is too unsubtle and that the questions ought to be better thought out in order to make sure only good candidates can answer. PS. Please don’t think I’m saying that I’m just so clever that I know everything automatically - I’ve learnt the hard way like everyone else. But avoiding global data is hardly revolutionary.

  Read the article

• Asp.net Mvc - Kigg: Maintain User object in HttpContext.Items between requests.

  - by Pickels

  Hallo, first I want to say that I hope this doesn't look like I am lazy but I have some trouble understanding a piece of code from the following project. http://kigg.codeplex.com/ I was going through the source code and I noticed something that would be usefull for my own little project I am making. In their BaseController they have the following code: private static readonly Type CurrentUserKey = typeof(IUser); public IUser CurrentUser { get { if (!string.IsNullOrEmpty(CurrentUserName)) { IUser user = HttpContext.Items[CurrentUserKey] as IUser; if (user == null) { user = AccountRepository.FindByClaim(CurrentUserName); if (user != null) { HttpContext.Items[CurrentUserKey] = user; } } return user; } return null; } } This isn't an exact copy of the code I adjusted it a little to my needs. This part of the code I still understand. They store their IUser in HttpContext.Items. I guess they do it so that they don't have to call the database eachtime they need the User object. The part that I don't understand is how they maintain this object in between requests. If I understand correctly the HttpContext.Items is a per request cache storage. So after some more digging I found the following code. internal static IDictionary<UnityPerWebRequestLifetimeManager, object> GetInstances(HttpContextBase httpContext) { IDictionary<UnityPerWebRequestLifetimeManager, object> instances; if (httpContext.Items.Contains(Key)) { instances = (IDictionary<UnityPerWebRequestLifetimeManager, object>) httpContext.Items[Key]; } else { lock (httpContext.Items) { if (httpContext.Items.Contains(Key)) { instances = (IDictionary<UnityPerWebRequestLifetimeManager, object>) httpContext.Items[Key]; } else { instances = new Dictionary<UnityPerWebRequestLifetimeManager, object>(); httpContext.Items.Add(Key, instances); } } } return instances; } This is the part where some magic happens that I don't understand. I think they use Unity to do some dependency injection on each request? In my project I am using Ninject and I am wondering how I can get the same result. I guess InRequestScope in Ninject is the same as UnityPerWebRequestLifetimeManager? I am also wondering which class/method they are binding to which interface? Since the HttpContext.Items get destroyed each request how do they prevent losing their user object? Anyway it's kinda a long question so I am gradefull for any push in the right direction. Kind regards, Pickels

  Read the article

• One Controller is Sometimes Bound Twice with Ninject

  - by Dusda

  I have the following NinjectModule, where we bind our repositories and business objects: /// <summary> /// Used by Ninject to bind interface contracts to concrete types. /// </summary> public class ServiceModule : NinjectModule { /// <summary> /// Loads this instance. /// </summary> public override void Load() { //bindings here. //Bind<IMyInterface>().To<MyImplementation>(); Bind<IUserRepository>().To<SqlUserRepository>(); Bind<IHomeRepository>().To<SqlHomeRepository>(); Bind<IPhotoRepository>().To<SqlPhotoRepository>(); //and so on //business objects Bind<IUser>().To<Data.User>(); Bind<IHome>().To<Data.Home>(); Bind<IPhoto>().To<Data.Photo>(); //and so on } } And here are the relevant overrides from our Global.asax, where we inherit from NinjectHttpApplication in order to integrate it with Asp.Net Mvc (The module lies in a separate dll called Thing.Web.Configuration): protected override void OnApplicationStarted() { base.OnApplicationStarted(); //routes and areas AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); //Initializes a singleton that must reference this HttpApplication class, //in order to provide the Ninject Kernel to the rest of Thing.Web. This //is necessary because there are a few instances (currently Membership) //that require manual dependency injection. NinjectKernel.Instance = new NinjectKernel(this); //view model factory. NinjectKernel.Instance.Kernel.Bind<IModelFactory>().To<MasterModelFactory>(); } protected override NinjectControllerFactory CreateControllerFactory() { return base.CreateControllerFactory(); } protected override Ninject.IKernel CreateKernel() { var kernel = new StandardKernel(); kernel.Load("Thing.Web.Configuration.dll"); return kernel; } Now, everything works great, with one exception: For some reason, sometimes Ninject will bind the PhotoController twice. This leads to an ActivationException, because Ninject can't discern which PhotoController I want. This causes all requests for thumbnails and other user images on the site to fail. Here is the PhotoController in it's entirety: public class PhotoController : Controller { public PhotoController() { } public ActionResult Index(string id) { var dir = Server.MapPath("~/" + ConfigurationManager.AppSettings["UserPhotos"]); var path = Path.Combine(dir, id); return base.File(path, "image/jpeg"); } } Every controller works in exactly the same way, but for some reason the PhotoController gets double-bound. Even then, it only happens occasionally (either when re-building the solution, or on staging/production when the app pool kicks in). Once this happens, it continues to happen until I redeploy without changing anything. So...what's up with that?

  Read the article

• waiting for 2 different events in a single thread

  - by João Portela

  component A (in C++) - is blocked waiting for alarm signals (not relevant) and IO signals (1 udp socket). has one handler for each of these. component B (java) - has to receive the same information the component A udp socket receives. periodicaly gives instructions that should be sent through component A udp socket. How to join both components? it is strongly desirable that: the changes to attach component B to component A are minimal (its not my code and it is not very pleasent to mess with). the time taken by the new operations (usually communicating with component B) interfere very little with the usual processing time of component A - this means that if the operations are going to take a "some" time I would rather use a thread or something to do them. note: since component A receives udp packets more frequently that it has component B instructions to forward, if necessary, it can only forward the instructions (when available) from the IO handler. my initial ideia was to develop a component C (in C++) that would sit inside the component A code (is this called an adapter?) that when instanciated starts the java process and makes the necessary connections (that not so little overhead in the initialization is not a problem). It would have 2 stacks, one for the data to give component B (lets call it Bstack) and for the data to give component A (lets call it Astack). It would sit on its thread (lets call it new-thread) waiting for data to be available in Bstack to send it over udp, and listen on the udp socket to put data on the Astack. This means that the changes to component A are only: when it receives a new UDP packet put it on the Bstack, and if there is something on the Astack sent it over its UDP socket (I decided for this because this socket would only be used in the main thread). One of the problems is that I don't know how to wait for both of these events at the same time using only one thread. so my questions are: Do I really need to use the main thread to send the data over component A socket or can I do it from the new-thread? (I think the answer is no, but I'm not sure about race conditions on sockets) how to I wait for both events? boost::condition_variable or something similar seems the solution in the case of the stack and boost::asio::io_service io_service.run() seems like the thing to use for the socket. Is there any other alternative solution for this problem that I'm not aware of? Thanks for reading this long text but I really wanted you to understand the problem.

  Read the article

• L-Soft LISTSERV TCPGUI Interface for PHP Creation

  - by poolnoodl

  I'm trying to use LISTSERV's "API" in PHP. L-Soft calls this TCPGUI, and essentially, you can request data like over Telnet. To do this, I'm using PHP's TCP socket functions. I've seen this done in other languages but can't quite convert it to PHP. I can connect, I can change set ASCII or BINARY mode. But I can never quite craft the header packet the way I need to authenticate, so I'm thinking I'm messing up my conversion. C: http://www.lsoft.com/manuals/16.0/htmlhelp/advanced%20topics/TCPGUI.html#2334328 $origin = '[email protected]'; $pwd = 'password'; $host = "example.com"; $port = 2306; $email = "[email protected]"; $list = "mailinglist"; $command = "Query $list FOR $email"; $fp = stream_socket_client("tcp://$host:$port", $errno, $errstr, 30); $cmd = $command . " PW=" . $pwd; $len = strlen($cmd); $orglen = strlen($origin); $n = $len + $orglen + 1; $headerPacket[0] = "1"; $headerPacket[1] = "B"; $headerPacket[2] = "\r"; $headerPacket[3] = "\n"; $headerPacket[4] = ord($n / 256); $headerPacket[5] = ord($n + 255); $headerPacket[6] = ord($orglen); for ($i = 0; $i < $orglen; $i++) { $headerPacket[$i + 7] = ord($origin[$i]); } for ($i = 0; $i < $len; $i++) { $cmdPacket[$i] = ord($cmd[$i]); } fwrite($fp, implode($headerPacket)); while (!feof($fp)) { echo fgets($fp, 1024); } Any thoughts on where I'm going wrong? I'd much appreciate it if anyone could point me toward some code to do this, days of googling and searching here on SO has only lead me to examples in other languages. Of course, if you know C (or Java or Perl as linked below in my comment to bypass the spam filter), PHP, and socket programming fairly well, you could probably rewrite the whole of the code in an hour, maybe a few minutes. You'd have my eternal thanks for that.

  Read the article

• How do you unit test the real world?

  - by Kim Sun-wu

  I'm primarily a C++ coder, and thus far, have managed without really writing tests for all of my code. I've decided this is a Bad Idea(tm), after adding new features that subtly broke old features, or, depending on how you wish to look at it, introduced some new "features" of their own. But, unit testing seems to be an extremely brittle mechanism. You can test for something in "perfect" conditions, but you don't get to see how your code performs when stuff breaks. A for instance is a crawler, let's say it crawls a few specific sites, for data X. Do you simply save sample pages, test against those, and hope that the sites never change? This would work fine as regression tests, but, what sort of tests would you write to constantly check those sites live and let you know when the application isn't doing it's job because the site changed something, that now causes your application to crash? Wouldn't you want your test suite to monitor the intent of the code? The above example is a bit contrived, and something I haven't run into (in case you haven't guessed). Let me pick something I have, though. How do you test an application will do its job in the face of a degraded network stack? That is, say you have a moderate amount of packet loss, for one reason or the other, and you have a function DoSomethingOverTheNetwork() which is supposed to degrade gracefully when the stack isn't performing as it's supposed to; but does it? The developer tests it personally by purposely setting up a gateway that drops packets to simulate a bad network when he first writes it. A few months later, someone checks in some code that modifies something subtly, so the degradation isn't detected in time, or, the application doesn't even recognize the degradation, this is never caught, because you can't run real world tests like this using unit tests, can you? Further, how about file corruption? Let's say you're storing a list of servers in a file, and the checksum looks okay, but the data isn't really. You want the code to handle that, you write some code that you think does that. How do you test that it does exactly that for the life of the application? Can you? Hence, brittleness. Unit tests seem to test the code only in perfect conditions(and this is promoted, with mock objects and such), not what they'll face in the wild. Don't get me wrong, I think unit tests are great, but a test suite composed only of them seems to be a smart way to introduce subtle bugs in your code while feeling overconfident about it's reliability. How do I address the above situations? If unit tests aren't the answer, what is? Thanks!

  Read the article

• Refactoring Singleton Overuse

  - by drharris

  Today I had an epiphany, and it was that I was doing everything wrong. Some history: I inherited a C# application, which was really just a collection of static methods, a completely procedural mess of C# code. I refactored this the best I knew at the time, bringing in lots of post-college OOP knowledge. To make a long story short, many of the entities in code have turned out to be Singletons. Today I realized I needed 3 new classes, which would each follow the same Singleton pattern to match the rest of the software. If I keep tumbling down this slippery slope, eventually every class in my application will be Singleton, which will really be no logically different from the original group of static methods. I need help on rethinking this. I know about Dependency Injection, and that would generally be the strategy to use in breaking the Singleton curse. However, I have a few specific questions related to this refactoring, and all about best practices for doing so. How acceptable is the use of static variables to encapsulate configuration information? I have a brain block on using static, and I think it is due to an early OO class in college where the professor said static was bad. But, should I have to reconfigure the class every time I access it? When accessing hardware, is it ok to leave a static pointer to the addresses and variables needed, or should I continually perform Open() and Close() operations? Right now I have a single method acting as the controller. Specifically, I continually poll several external instruments (via hardware drivers) for data. Should this type of controller be the way to go, or should I spawn separate threads for each instrument at the program's startup? If the latter, how do I make this object oriented? Should I create classes called InstrumentAListener and InstrumentBListener? Or is there some standard way to approach this? Is there a better way to do global configuration? Right now I simply have Configuration.Instance.Foo sprinkled liberally throughout the code. Almost every class uses it, so perhaps keeping it as a Singleton makes sense. Any thoughts? A lot of my classes are things like SerialPortWriter or DataFileWriter, which must sit around waiting for this data to stream in. Since they are active the entire time, how should I arrange these in order to listen for the events generated when data comes in? Any other resources, books, or comments about how to get away from Singletons and other pattern overuse would be helpful.

  Read the article

• Any suggestions for improvement on this style for BDD/TDD?

  - by Sean B

  I was tinkering with doing the setups with our unit test specifciations which go like Specification for SUT when behaviour X happens in scenario Y Given that this thing And also this other thing When I do X... Then It should do ... And It should also do ... I wrapped each of the steps of the GivenThat in Actions... any feed back whether separating with Actions is good / bad / or better way to make the GivenThat clear? /// <summary> /// Given a product is setup for injection /// And Product Image Factory Is Stubbed(); /// And Product Size Is Stubbed(); /// And Drawing Scale Is Stubbed(); /// And Product Type Is Stubbed(); /// </summary> protected override void GivenThat() { base.GivenThat(); Action givenThatAProductIsSetupforInjection = () => { var randomGenerator = new RandomGenerator(); this.Position = randomGenerator.Generate<Point>(); this.Product = new Diffuser { Size = new RectangularProductSize( 2.Inches()), Position = this.Position, ProductType = Dep<IProductType>() }; }; Action andProductImageFactoryIsStubbed = () => Dep<IProductBitmapImageFactory>().Stub(f => f.GetInstance(Dep<IProductType>())).Return(ExpectedBitmapImage); Action andProductSizeIsStubbed = () => { Stub<IDisplacementProduct, IProductSize>(p => p.Size); var productBounds = new ProductBounds(Width.Feet(), Height.Feet()); Dep<IProductSize>().Stub(s => s.Bounds).Return(productBounds); }; Action andDrawingScaleIsStubbed = () => Dep<IDrawingScale>().Stub(s => s.PixelsPerFoot).Return(PixelsPerFoot); Action andProductTypeIsStubbed = () => Stub<IDisplacementProduct, IProductType>(p => p.ProductType); givenThatAProductIsSetupforInjection(); andProductImageFactoryIsStubbed(); andProductSizeIsStubbed(); andDrawingScaleIsStubbed(); andProductTypeIsStubbed(); }

  Read the article

• execl doesn't work in a while(1) cicle, server side; C script

  - by Possa

  Hi guys, I have a problem with a little C script who should run as a server and launch a popup for every message arriving. The execl syntax is correct because if I try a little script with main() { execl(...); } it works. When I put it in a while(1) cicle it doesn't work. Everything else is working, like printf or string operation, but not the execl. Even if I fork it doesn't work. I really don't know what I can do ... can anyone help me? Thanks in advice for your help and sorry for my bad english. Here's the complete server C code. #include <arpa/inet.h> #include <netinet/in.h> #include <stdio.h> #include <stdlib.h> #include <sys/types.h> #include <sys/socket.h> #include <unistd.h> #include <string.h> #define BUFLEN 512 #define PORT 9930 void diep(char *s) { perror(s); exit(1); } int main() { struct sockaddr_in si_me, si_other; int s, i, slen=sizeof(si_other), broadcastPermission; char buf[100], zeni[BUFLEN]; if ((s=socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP))==-1) diep("socket"); broadcastPermission = 1; if (setsockopt(s, SOL_SOCKET, SO_BROADCAST, (void *) &broadcastPermission, sizeof(broadcastPermission)) < 0) diep("setsockopt() failed"); memset((char *) &si_me, 0, sizeof(si_me)); si_me.sin_family = AF_INET; si_me.sin_port = htons(PORT); si_me.sin_addr.s_addr = htonl(INADDR_ANY); if (bind(s, &si_me, sizeof(si_me))==-1) diep("bind"); while (1) { if (recvfrom(s, buf, BUFLEN, 0, &si_other, &slen)==-1) diep("recvfrom()"); //printf("Received packet from %s:%d\nData: %s\n", inet_ntoa(si_other.sin_addr), ntohs(si_other.sin_port), buf); strcpy(zeni, ""); strcat(zeni, "zenity --warning --title Hack!! --text "); strcat(zeni, buf); printf("cmd: %s\n", zeni); //system (zeni); execl("/usr/bin/zenity", "/usr/bin/zenity", "--warning", "--title", "Warn!", "--text", buf, (char *) NULL); } close(s); return 0; }

  Read the article

• When does logic belong in the Business Object/Entity, and when does it belong in a Service?

  - by Casey

  In trying to understand Domain Driven Design I keep returning to a question that I can't seem to definitively answer. How do you determine what logic belongs to a Domain entity, and what logic belongs to a Domain Service? Example: We have an Order class for an online store. This class is an entity and an aggregate root (it contains OrderItems). Public Class Order:IOrder { Private List<IOrderItem> OrderItems Public Order(List<IOrderItem>) { OrderItems = List<IOrderItem> } Public Decimal CalculateTotalItemWeight() //This logic seems to belong in the entity. { Decimal TotalWeight = 0 foreach(IOrderItem OrderItem in OrderItems) { TotalWeight += OrderItem.Weight } return TotalWeight } } I think most people would agree that CalculateTotalItemWeight belongs on the entity. However, at some point we have to ship this order to the customer. To accomplish this we need to do two things: 1) Determine the postage rate necessary to ship this order. 2) Print a shipping label after determining the postage rate. Both of these actions will require dependencies that are outside the Order entity, such as an external webservice to retrieve postage rates. How should we accomplish these two things? I see a few options: 1) Code the logic directly in the domain entity, like CalculateTotalItemWeight. We then call: Order.GetPostageRate Order.PrintLabel 2) Put the logic in a service that accepts IOrder. We then call: PostageService.GetPostageRate(Order) PrintService.PrintLabel(Order) 3) Create a class for each action that operates on an Order, and pass an instance of that class to the Order through Constructor Injection (this is a variation of option 1 but allows reuse of the RateRetriever and LabelPrinter classes): Public Class Order:IOrder { Private List<IOrderItem> OrderItems Private RateRetriever _Retriever Private LabelPrinter _Printer Public Order(List<IOrderItem>, RateRetriever Retriever, LabelPrinter Printer) { OrderItems = List<IOrderItem> _Retriever = Retriever _Printer = Printer } Public Decimal GetPostageRate { _Retriever.GetPostageRate(this) } Public void PrintLabel { _Printer.PrintLabel(this) } } Which one of these methods do you choose for this logic, if any? What is the reasoning behind your choice? Most importantly, is there a set of guidelines that led you to your choice?

  Read the article

• GKSession sendDataToAllPeers getting invalid parameter

  - by cb4

  This is my first post and I wanted to start it by thanking the many stackoverflow contributors who will never know how much they helped me out these past several days as I worked to complete my first iOS app. I am indebted to them and to this site for giving them a place to post. To 'pay off' some of that debt, I hope this will help others as I have been helped... So, my app uses the GKPeerPickerController to make a connection to a 2nd device. Once connected, the devices can send text messages to each other. The receiving peer has the message displayed in a UIAlertView. Everything was working fine. Then I decided to experiment with locations and added code to get the current location. I convert it into latitude & longitude in degrees, minutes, and seconds and put them into one NSString. I added a button to my storyboard called 'Send Location' which, when tapped, sends the location to the connected peer. This is where I ran into the problem. Both the send text and send location methods call the sendPacket method with a NSString. sendPacket converts the string to NSData and calls sendDataToAllPeers. When I learned how to capture the error, it was "Invalid parameter for - sendDataToAllPeers:withDataMode:error:". [.....pause.....] Well, this was going to be a question but in writing all this to explain the problem, the answer just dawned on me. Did a few tests and verified it now works. The issue was not in sendDataToAllPeers, it was in the conversion of the NSString (strToSend) to NSData: packet = [strToSend dataUsingEncoding:NSASCIIStringEncoding]; Specifically, it was the degree sign character (little circle, ASCII 176). NSASCIIStringEncoding only includes ASCII characters up to 127 so don't use any above that. I'm sure there was a quicker way to find the problem, but I don't know Objective-C or Xcode's debugging facility well enough yet. Whew! Several hours to discover that little tidbit. I did learn a lot, though, and that's always a good thing!

  Read the article

• Socket connection to a telnet-based server hangs on read

  - by mixwhit

  I'm trying to write a simple socket-based client in Python that will connect to a telnet server. I can test the server by telnetting to its port (5007), and entering text. It responds with a NAK (error) or an AK (success), sometimes accompanied by other text. Seems very simple. I wrote a client to connect and communicate with the server, but it hangs on the first attempt to read the response. The connection is successful. Queries like getsockname and getpeername are successful. The send command returns a value that equals the number of characters I'm sending, so it seems to be sending correctly. But in the end, it always hangs when I try to read the response. I've tried using both file-based objects like readline and write (via socket.makefile), as well as using send and recv. With the file object I tried making it with "rw" and reading and writing via that object, and later tried one object for "r" and another for "w" to separate them. None of these worked. I used a packet sniffer to watch what's going on. I'm not versed in all that I'm seeing, but during a telnet session I can see my typed text and the server's text coming back. During my Python socket connection, I can see my text going to the server, but packets back don't seem to have any text in them. Any ideas on what I'm doing wrong, or any strategies to try? Here's the code I'm using (in this case, it's with send and recv): #!/usr/bin/python host = "localhost" port = 5007 msg = "HELLO EMC 1 1" msg2 = "HELLO" import socket import sys try: skt = socket.socket(socket.AF_INET, socket.SOCK_STREAM) except socket.error, e: print("Error creating socket: %s" % e) sys.exit(1) try: skt.connect((host,port)) except socket.gaierror, e: print("Address-related error connecting to server: %s" % e) sys.exit(1) except socket.error, e: print("Error connecting to socket: %s" % e) sys.exit(1) try: print(skt.send(msg)) print("SEND: %s" % msg) except socket.error, e: print("Error sending data: %s" % e) sys.exit(1) while 1: try: buf = skt.recv(1024) print("RECV: %s" % buf) except socket.error, e: print("Error receiving data: %s" % e) sys.exit(1) if not len(buf): break sys.stdout.write(buf)

  Read the article

• session fixation

  - by markiv

  Hi All, I am new to web development, and trying to get a hold on security issues. I went through this article on http://guides.rubyonrails.org/security.html these are some of the steps the author has mentioned how an attacker fixes session. 1. The attacker creates a valid session id: He loads the login page of the web application where he wants to fix the session, and takes the session id in the cookie from the response (see number 1 and 2 in the image). 2. He possibly maintains the session. Expiring sessions, for example every 20 minutes, greatly reduces the time-frame for attack. Therefore he accesses the web application from time to time in order to keep the session alive. 3. Now the attacker will force the user’s browser into using this session id (see number 3 in the image). As you may not change a cookie of another domain (because of the same origin policy), the attacker has to run a JavaScript from the domain of the target web application. Injecting the JavaScript code into the application by XSS accomplishes this attack. Here is an example: <script>?document.cookie="_session_id=16d5b78abb28e3d6206b60f22a03c8d9";?</script>. Read more about XSS and injection later on. 4. The attacker lures the victim to the infected page with the JavaScript code. By viewing the page, the victim’s browser will change the session id to the trap session id. 5. As the new trap session is unused, the web application will require the user to authenticate. 6. From now on, the victim and the attacker will co-use the web application with the same session: The session became valid and the victim didn’t notice the attack. I dont understand couple of points. i) why is user made to login in step5, since session is sent through. ii) I saw possible solutions on wiki, like user properties check and others why cant we just reset the session for the user whoever is login in when they enter username and password in step5? Thanks in advance Markiv

  Read the article

• CodePlex Daily Summary for Monday, February 22, 2010

  CodePlex Daily Summary for Monday, February 22, 2010New ProjectsAVDB: System to keep track of orders and the inventory of televisions, DVDs, VCRs etcBooky: Booky is an online Bookmark Management Tool. Gear Up for Lord of the Rings Online (lotro): Windows utility for checking what your LOTRO character currently has equipped and figuring out gear you should get to improve your stats.GotSharp Extensions: GotSharp Extensions is a set of helpful classes and extension methods that can make your coding experience easier and cleaner. Halfwit: A minimalist WPF Twitter client.HOA Starter Kit: A community subdivision website starter kit. First draft.Lua For Irony: Project to define the Lua language using the Irony (http://irony.codeplex.com/) development kit. This work is based heavily on the work done for V...MimeCloud: Scalable .NET Digital Asset & Media Management: MimeCloud is a scalable digital asset library & media management toolset. Founded by Alex Norcliffe and Peter Miller Written by people who have b...Parallel Mandelbrot Set solver: Solving the Mandelbrot set using the Parallel class in .NET 4.0. Showing the resulting image in a WPF application. The solution file requires VS 2010.Pomogad - Pomodoro Windows Gadget: Você usa Pomodoro Technique? Não sabe o que é? Veja aqui http://www.pomodorotechnique.com Agora que você já sabe, que tal usar essa técnica? E p...PostCrap - flyweight .NET AOP post compiler: PostCrap is a flyweight attribute based aspect injection .NET post compiler It is written in C# and uses Mono.Cecil to modify assemblies and injec...Software + Service Reference Demo Kit: MS China Developer and Platform Evangelism team created an End-2-End demo for Software + Service. Yet Another SharePoint Tool: YEAST provides you with a simple to integrate approach to generating SharePoint solution packages as part of a Visual Studio project. Zen Coding Visual Studio Plugin: Zen Coding for Visual Studio is plugin for HTML and CSS hi-speed codingNew Releases.Net MSBuild Google Closure Compiler Task: .Net MSBuild Google Closure Compiler Task 1.1: - Corrected issue with regular expression source file and renamingdotNails: dotNails_0.5.9: NOTE - the latest source code has been moved to google code to take advantage of Mercurial source control - http://code.google.com/p/dotnails/sourc...EasyWFUnit: EasyWFUnit-2.2: Release 2.2 of EasyWFUnit, an extension library to support unit testing of Windows Workflow, includes a revised WinForm GUI Test Builder that utili...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite BETA2 (for .NET 4.0RC): Includes Fluent.dll (with .pdb and .xml) and test application compiled with .NET 4.0 RC.FolderSize: FolderSize.Win32.1.0.3.0: FolderSize.Win32.1.0.3.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...Fusion Charts Free for SharePoint: 1.3: Fix release for issue #11833 : Feature Must Be Activated on Root of Web Application.GotSharp Extensions: 1.0: First release, containing only a few extension methods for the System.String and System.IO.Stream classes, and a Range utility class.Jeremy's Experimental Repository: FluentValidation with IoC Sample: Sample code for the blog post Using FluentValidation with an IoC containerMiniTwitter: 1.08: MiniTwitter 1.08 更新内容 修正 自動更新が CodePlex の変更で動いていなかった問題を修正 自動更新に失敗すると落ちるバグを修正 通知領域アイコン右クリックで表示されるメニューが消えないバグを修正 変更 ハッシュタグの抽出条件を変更 API のエンドポイ...MSTS Editors & Tools: Simis Editor v0.3: Simis Editor v0.3 Enabled Edit > Undo and Edit > Redo. Undoing/redoing back to last saved state is identified as saved (no prompt on exit, etc.)....Parallel Mandelbrot Set solver: Alpha 1: First releaseParallelTasks: ParallelTasks 2.0 beta1: ParallelTasks 2.0 is a total re-write of the original version. Featuring improved performance and stability and a more consistent API.Personal Expense Tracker: Personal Expense Tracker v0.1 beta: This is the first beta release. Please provide me with your feedback.PostCrap - flyweight .NET AOP post compiler: PostCrap 1.0 AOP source and binaries: PostCrap 1.0 source and binaries (the unit test project contains sample interceptor attributes for exception handling & logging)Protoforma | Tactica Adversa: Skilful 0.1.3.276: AlphaRawr: Rawr 2.3.10: - More improvements to the default filters - Further improvement on avoiding useless gem swaps from the Optimizer. - Normal/Heroic ICC items shou...Reusable Library: v1.0.2: A collection of reusable abstractions for enterprise application developer.Sem.Sync: 2010-02-21 - Synchronization Manager - Beta: This release is not tested very well, so you should use this version only to evaluate new features. - Changed way of handling source-ids in order ...Survey - web survey & form engine: Survey 1.1.0: Release Survey v. 1.1.0.0 Major changes: - layout & graphics completely overhauled - several technical changes & repairs (e.g. matrix question iss...Yet Another SharePoint Tool: Version 1: Version 1Zeta Resource Editor: Release 2010-02-21: New source code release.Most Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Image Resizer Powertoy Clone for WindowsASP.NETDotNetNuke® Community EditionMicrosoft SQL Server Community & SamplesMost Active ProjectsDinnerNow.netRawrBlogEngine.NETNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSharpyjQuery Library for SharePoint Web ServicesSharePoint ContribInfoServicepatterns & practices – Enterprise LibraryPHPExcel

  Read the article

• Solaris 10 branded zone VM Templates for Solaris 11 on OTN

  - by jsavit

  Early this year I wrote the article Ours Goes To 11 which describes the ability to import Solaris 10 systems into a "Solaris 10 branded zone" under Oracle Solaris 11. I did this using Solaris 11 Express, and the capability remains in Solaris 11 with only slight changes. This important tool lets you painlessly inhaling a Solaris Container from Solaris 10 or entire Solaris 10 systems ("the global zone") into virtualized environments on a Solaris 11 OS. Just recently, Oracle provided Oracle VM Templates for Oracle Solaris 10 Zones to let you create Solaris 10 branded zones for Solaris 11 even if you don't currently have access to install media or a running Solaris 10 system. To use this, just download the Oracle VM Template for Oracle Solaris Zone 10 from OTN at http://www.oracle.com/technetwork/server-storage/solaris11/downloads/virtual-machines-1355605.html. This page contains images of Oracle Solaris 10 8/11 (the recent update to Solaris 10) in SPARC and x86 formats suitable for creating branded zones. The same page also has a VirtualBox image you can download for a complete Solaris 10 install in a guest virtual machine you can run on any host OS that supports VirtualBox. Both sets of downloads provide a quick - and extremely easy - way to set up a virtual Solaris 10 environment. In the case of the Oracle VM Templates, they illustrate several advanced features of Solaris 11. To start, just go to the above link, download the template for the hardware platform (SPARC or x86) you want, and download the README file also linked from that page. Install prerequisites The README file tells you to install the prerequisite Solaris 11 package that implements the Solaris 10 brand. Then you can install instances of zones with that brand. # pkg install pkg:/system/zones/brand/brand-solaris10 Packages to install: 1 Create boot environment: No Create backup boot environment: Yes DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 44/44 0.4/0.4 PHASE ACTIONS Install Phase 74/74 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 That took only a few minutes, and didn't require a reboot. Install the Solaris 10 zone Now it's time to run the downloaded template file. First make it executable via the chmod command, of course. I found that (unlike stated in the README) there was no need to rename the downloaded file to remove the .bin. When you run it you provide several parameters to describe the zone configuration: -a IP address - the IP address and optional netmask for the zone. This is the only mandatory parameter. -z zonename - the name of the zone you would like to create. -i interface - the package will create an exclusive-IP zone using a virtual NIC (vnic) based on this physical interface. In my case, I have a NIC called rge0. -p PATH - specifies the path in which you want the zoneroot to be placed. In my case, I have a ZFS dataset mounted at /zones, and this will create a zoneroot at /zones/s10u10. Kicking it off, you will see a copyright message, and then messages showing progress building the zone, which only takes a few minutes. # ./solaris-10u10-x86.bin -p /zones -a 192.168.1.100 -i rge0 -z s10u10 ... ... Checking disk-space for extraction Ok Extracting in /export/home/CDimages/s10zone/bootimage.ihaqvh ... 100% [===============================] Checking data integrity Ok Checking platform compatibility The host and the image do not have the same Solaris release: host Solaris release: 5.11 image Solaris release: 5.10 Will create a Solaris 10 branded zone. Warning: could not find a defaultrouter Zone won't have any defaultrouter configured IMAGE: ./solaris-10u10-x86.bin ZONE: s10u10 ZONEPATH: /zones/s10u10 INTERFACE: rge0 VNIC: vnicZBI13379 MAC ADDR: 2:8:20:5c:1a:cc IP ADDR: 192.168.1.100 NETMASK: 255.255.255.0 DEFROUTER: NONE TIMEZONE: US/Arizona Checking disk-space for installation Ok Installing in /zones/s10u10 ... 100% [===============================] Using a static exclusive-IP Attaching s10u10 Booting s10u10 Waiting for boot to complete booting... booting... booting... Zone s10u10 booted The zone's root password has been set using the root password of the local host. You can change the zone's root password to further harden the security of the zone: being root, log into the zone from the local host with the command 'zlogin s10u10'. Once logged in, change the root password with the command 'passwd'. The nifty part in my opinion (besides being so easy), is that the zone was created as an exclusive-IP zone on a virtual NIC. This network configuration lets you enforce traffic isolation from other zones, enforce network Quality of Service, and even let the zone set its own characteristics like IP address and packet size. Independence of the zone's network characteristics from the global zone is one of the enhancements in Solaris 10 that make it easier to consolidate zones while preserving their autonomy, yet provide control in a consolidated environment. Let's see what the virtual network environment looks like by issuing commands from the Solaris 11 global zone. First I'll use Old School ifconfig, and then I'll use the new ipadm and dladm commands. # ifconfig -a4 lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 rge0: flags=1004943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,DHCP,IPv4> mtu 1500 index 2 inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 ether 0:14:d1:18:ac:bc vboxnet0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3 inet 192.168.56.1 netmask ffffff00 broadcast 192.168.56.255 ether 8:0:27:f8:62:1c # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE yge0 Ethernet unknown 0 unknown yge0 yge1 Ethernet unknown 0 unknown yge1 rge0 Ethernet up 1000 full rge0 vboxnet0 Ethernet up 1000 full vboxnet0 # dladm show-link LINK CLASS MTU STATE OVER yge0 phys 1500 unknown -- yge1 phys 1500 unknown -- rge0 phys 1500 up -- vboxnet0 phys 1500 up -- vnicZBI13379 vnic 1500 up rge0 s10u10/vnicZBI13379 vnic 1500 up rge0 s10u10/net0 vnic 1500 up rge0 # dladm show-vnic LINK OVER SPEED MACADDRESS MACADDRTYPE VID vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/net0 rge0 1000 2:8:20:9d:d0:79 random 0 # ipadm show-addr ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8 rge0/_a dhcp ok 192.168.1.3/24 vboxnet0/_a static ok 192.168.56.1/24 lo0/v6 static ok ::1/128 Log into the zone The install step already booted the zone, so lets log into it. Notice how you have to be appropriately privileged to log into a zone. This is my home system so I'm being a bit cavalier, but in a production environment you can give granular control of who can login to which zones. Voila! a Solaris 10 environment under a Solaris 11 kernel. Notice the output from the uname -a and ifconfig commands, and output from a ping to a nearby host. $ zlogin s10u10 zlogin: You lack sufficient privilege to run this command (all privs required) savit@home:~$ sudo zlogin s10u10 Password: [Connected to zone 's10u10' pts/5] Oracle Corporation SunOS 5.10 Generic Patch January 2005 # uname -a SunOS s10u10 5.10 Generic_Virtual i86pc i386 i86pc # ifconfig -a4 lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc # bash bash-3.2# ifconfig -a lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc bash-3.2# ping 192.168.1.2 192.168.1.2 is alive For fun, I configured Apache (setting its configuration file in /etc/apache2) and brought it up. Easy - took just a few minutes. bash-3.2# svcs apache2 STATE STIME FMRI disabled 12:38:46 svc:/network/http:apache2 bash-3.2# svcadm enable apache2 Summary In just a few minutes, I built a functioning virtual Solaris 10 environment under by Solaris 11 system. It was... easy! While I can still do it the manual way (creating and using a system archive), this is a low-effort way to create a Solaris 10 zone on Solaris 11.

  Read the article

• ASP.NET Controls – CommunityServer Captcha ControlAdapter, a practical case

  - by nmgomes

  The ControlAdapter is available since .NET framework version 2.0 and his main goal is to adapt and customize a control render in order to achieve a specific behavior or layout. This customization is done without changing the base control. A ControlAdapter is commonly used to custom render for specific platforms like Mobile. In this particular case the ControlAdapter was used to add a specific behavior to a Control. In this  post I will use one adapter to add a Captcha to all WeblogPostCommentForm controls within pontonetpt.com CommunityServer instance. The Challenge The ControlAdapter complexity is usually associated with the complexity/structure of is base control. This case is precisely one of those since base control dynamically load his content (controls) thru several ITemplate. Those of you who already played with ITemplate knows that while it is an excellent option for control composition it also brings to the table a big issue: “Controls defined within a template are not available for manipulation until they are instantiated inside another control.” While analyzing the WeblogPostCommentForm control I found that he uses the ITemplate technique to compose it’s layout and unfortunately I also found that the template content vary from theme to theme. This could have been a problem but luckily WeblogPostCommentForm control template content always contains a submit button with a well known ID (at least I can assume that there are a well known set of IDs). Using this submit button as anchor it’s possible to add the Captcha controls in the correct place. Another important finding was that WeblogPostCommentForm control inherits from the WrappedFormBase control which is the base control for all CommunityServer input forms. Knowing this inheritance link the main goal has changed to became the creation of a base ControlAdapter that  could be extended and customized to allow adding Captcha to: post comments form contact form user creation form. And, with this mind set, I decided to used the following ControlAdapter base class signature :public abstract class WrappedFormBaseCaptchaAdapter<T> : ControlAdapter where T : WrappedFormBase { }Great, but there are still many to do … Captcha The Captcha will be assembled with: A dynamically generated image with a set of random numbers A TextBox control where the image number will be inserted A Validator control to validate whether TextBox numbers match the image numbers This is a common Captcha implementation, is not rocket science and don’t bring any additional problem. The main problem, as told before, is to find the correct anchor control to ensure a correct Captcha control injection. The anchor control can vary by: target control  theme Implementation To support this dynamic scenario I choose to use the following implementation:private List<string> _validAnchorIds = null; protected virtual List<string> ValidAnchorIds { get { if (this._validAnchorIds == null) { this._validAnchorIds = new List<string>(); this._validAnchorIds.Add("btnSubmit"); } return this._validAnchorIds; } } private Control GetAnchorControl(T wrapper) { if (this.ValidAnchorIds == null || this.ValidAnchorIds.Count == 0) { throw new ArgumentException("Cannot be null or empty", "validAnchorNames"); } var q = from anchorId in this.ValidAnchorIds let anchorControl = CSControlUtility.Instance().FindControl(wrapper, anchorId) where anchorControl != null select anchorControl; return q.FirstOrDefault(); } I can now, using the ValidAnchorIds property, configure a set of valid anchor control  Ids. The GetAnchorControl method searches for a valid anchor control within the set of valid control Ids. Here, some of you may question why to use a LINQ To Objects expression, but the important here is to notice the usage of CSControlUtility.Instance().FindControl CommunityServer method. I want to build on top of CommunityServer not to reinvent the wheel. Assuming that an anchor control was found, it’s now possible to inject the Captcha at the correct place. This not something new, we do this all the time when creating server controls or adding dynamic controls:protected sealed override void CreateChildControls() { base.CreateChildControls(); if (this.IsCaptchaRequired) { T wrapper = base.Control as T; if (wrapper != null) { Control anchorControl = GetAnchorControl(wrapper); if (anchorControl != null) { Panel phCaptcha = new Panel {CssClass = "CommonFormField", ID = "Captcha"}; int index = anchorControl.Parent.Controls.IndexOf(anchorControl); anchorControl.Parent.Controls.AddAt(index, phCaptcha); CaptchaConfiguration.DefaultProvider.AddCaptchaControls( phCaptcha, GetValidationGroup(wrapper, anchorControl)); } } } } Here you can see a new entity in action: a provider. This is a CaptchaProvider class instance and is only goal is to create the Captcha itself and do everything else is needed to ensure is correct operation.public abstract class CaptchaProvider : ProviderBase { public abstract void AddCaptchaControls(Panel captchaPanel, string validationGroup); } You can create your own specific CaptchaProvider class to use different Captcha strategies including the use of existing Captcha services  like ReCaptcha. Once the generic ControlAdapter was created became extremely easy to created a specific one. Here is the specific ControlAdapter for the WeblogPostCommentForm control:public class WeblogPostCommentFormCaptchaAdapter : WrappedFormBaseCaptchaAdapter<WrappedFormBase> { #region Overriden Methods protected override List<string> ValidAnchorIds { get { List<string> validAnchorNames = base.ValidAnchorIds; validAnchorNames.Add("CommentSubmit"); return validAnchorNames; } } protected override string DefaultValidationGroup { get { return "CreateCommentForm"; } } #endregion Overriden Methods } Configuration This is the magic step. Without changing the original pages and keeping the application original assemblies untouched we are going to add a new behavior to the CommunityServer application. To glue everything together you must follow this steps: Add the following configuration to default.browser file:<?xml version='1.0' encoding='utf-8'?> <browsers> <browser refID="Default"> <controlAdapters> <!-- Adapter for the WeblogPostCommentForm control in order to add the Captcha and prevent SPAM comments --> <adapter controlType="CommunityServer.Blogs.Controls.WeblogPostCommentForm" adapterType="NunoGomes.CommunityServer.Components.WeblogPostCommentFormCaptchaAdapter, NunoGomes.CommunityServer" /> </controlAdapters> </browser> </browsers> Add the following configuration to web.config file:<configuration> <configSections> <!-- New section for Captcha providers configuration --> <section name="communityServer.Captcha" type="NunoGomes.CommunityServer.Captcha.Configuration.CaptchaSection" /> </configSections> <!-- Configuring a simple Captcha provider --> <communityServer.Captcha defaultProvider="simpleCaptcha"> <providers> <add name="simpleCaptcha" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProvider, NunoGomes.CommunityServer" imageUrl="~/captcha.ashx" enabled="true" passPhrase="_YourPassPhrase_" saltValue="_YourSaltValue_" hashAlgorithm="SHA1" passwordIterations="3" keySize="256" initVector="_YourInitVectorWithExactly_16_Bytes_" /> </providers> </communityServer.Captcha> <system.web> <httpHandlers> <!-- The Captcha Image handler used by the simple Captcha provider --> <add verb="GET" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </httpHandlers> </system.web> <system.webServer> <handlers accessPolicy="Read, Write, Script, Execute"> <!-- The Captcha Image handler used by the simple Captcha provider --> <add verb="GET" name="captcha" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </handlers> </system.webServer> </configuration> Conclusion Building a ControlAdapter can be complex but the reward is his ability to allows us, thru configuration changes, to modify an application render and/or behavior. You can see this ControlAdapter in action here and here (anonymous required). A complete solution is available in “CommunityServer Extensions” Codeplex project.

  Read the article

• SSH new connection begins to hang (not reject or terminate) after a day or so on Ubuntu 13.04 server

  - by kross

  Recently we upgraded the server from 12.04 LTS server to 13.04. All was well, including after a reboot. With all packages updated we began to see a strange issue, ssh works for a day or so (unclear on timing) then a later request for SSH hangs (cannot ctrl+c, nothing). It is up and serving webserver traffic etc. Port 22 is open (ips etc altered slightly for posting): nmap -T4 -A x.acme.com Starting Nmap 6.40 ( http://nmap.org ) at 2013-09-12 16:01 CDT Nmap scan report for x.acme.com (69.137.56.18) Host is up (0.026s latency). rDNS record for 69.137.56.18: c-69-137-56-18.hsd1.tn.provider.net Not shown: 998 filtered ports PORT STATE SERVICE VERSION 22/tcp open ssh OpenSSH 6.1p1 Debian 4 (protocol 2.0) | ssh-hostkey: 1024 54:d3:e3:38:44:f4:20:a4:e7:42:49:d0:a7:f1:3e:21 (DSA) | 2048 dc:21:77:3b:f4:4e:74:d0:87:33:14:40:04:68:33:a6 (RSA) |_256 45:69:10:79:5a:9f:0b:f0:66:15:39:87:b9:a1:37:f7 (ECDSA) 80/tcp open http Jetty 7.6.2.v20120308 | http-title: Log in as a Bamboo user - Atlassian Bamboo |_Requested resource was http://x.acme.com/userlogin!default.action;jsessionid=19v135zn8cl1tgso28fse4d50?os_destination=%2Fstart.action Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 12.89 seconds Here is the ssh -vvv: ssh -vvv x.acme.com OpenSSH_5.9p1, OpenSSL 0.9.8x 10 May 2012 debug1: Reading configuration data /Users/tfergeson/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to x.acme.com [69.137.56.18] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/Users/tfergeson/.ssh/id_rsa" as a RSA1 public key debug1: identity file /Users/tfergeson/.ssh/id_rsa type 1 debug1: identity file /Users/tfergeson/.ssh/id_rsa-cert type -1 debug1: identity file /Users/tfergeson/.ssh/id_dsa type -1 debug1: identity file /Users/tfergeson/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1p1 Debian-4 debug1: match: OpenSSH_6.1p1 Debian-4 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "x.acme.com" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:10 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 130/256 debug2: bits set: 503/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA dc:21:77:3b:f4:4e:74:d0:87:33:14:40:04:68:33:a6 debug3: load_hostkeys: loading entries for host "x.acme.com" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:10 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "69.137.56.18" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:6 debug3: load_hostkeys: loaded 1 keys debug1: Host 'x.acme.com' is known and matches the RSA host key. debug1: Found key in /Users/tfergeson/.ssh/known_hosts:10 debug2: bits set: 493/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /Users/tfergeson/.ssh/id_rsa (0x7ff189c1d7d0) debug2: key: /Users/tfergeson/.ssh/id_dsa (0x0) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/tfergeson/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 277 debug2: input_userauth_pk_ok: fp 3c:e5:29:6c:9d:27:d1:7d:e8:09:a2:e8:8e:6e:af:6f debug3: sign_and_send_pubkey: RSA 3c:e5:29:6c:9d:27:d1:7d:e8:09:a2:e8:8e:6e:af:6f debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). Authenticated to x.acme.com ([69.137.56.18]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: fd 3 setting TCP_NODELAY debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ATLAS_OPTS debug3: Ignored env rvm_bin_path debug3: Ignored env TERM_PROGRAM debug3: Ignored env GEM_HOME debug3: Ignored env SHELL debug3: Ignored env TERM debug3: Ignored env CLICOLOR debug3: Ignored env IRBRC debug3: Ignored env TMPDIR debug3: Ignored env Apple_PubSub_Socket_Render debug3: Ignored env TERM_PROGRAM_VERSION debug3: Ignored env MY_RUBY_HOME debug3: Ignored env TERM_SESSION_ID debug3: Ignored env USER debug3: Ignored env COMMAND_MODE debug3: Ignored env rvm_path debug3: Ignored env COM_GOOGLE_CHROME_FRAMEWORK_SERVICE_PROCESS/USERS/tfergeson/LIBRARY/APPLICATION_SUPPORT/GOOGLE/CHROME_SOCKET debug3: Ignored env JPDA_ADDRESS debug3: Ignored env APDK_HOME debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env Apple_Ubiquity_Message debug3: Ignored env __CF_USER_TEXT_ENCODING debug3: Ignored env rvm_sticky_flag debug3: Ignored env MAVEN_OPTS debug3: Ignored env LSCOLORS debug3: Ignored env rvm_prefix debug3: Ignored env PATH debug3: Ignored env PWD debug3: Ignored env JAVA_HOME debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env JPDA_TRANSPORT debug3: Ignored env rvm_version debug3: Ignored env M2_HOME debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env rvm_ruby_string debug3: Ignored env LOGNAME debug3: Ignored env M2_REPO debug3: Ignored env GEM_PATH debug3: Ignored env AWS_RDS_HOME debug3: Ignored env rvm_delete_flag debug3: Ignored env EC2_PRIVATE_KEY debug3: Ignored env RUBY_VERSION debug3: Ignored env SECURITYSESSIONID debug3: Ignored env EC2_CERT debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 I can hard reboot (only mac monitors at that location) and it will again be accessible. This now happens every single time. It is imperative that I get it sorted. The strange thing is that it behaves initially then starts to hang after several hours. I perused logs previously and nothing stood out. From the auth.log, I can see that it has allowed me in, but still I get nothing back on the client side: Sep 20 12:47:50 cbear sshd[25376]: Accepted publickey for tfergeson from 10.1.10.14 port 54631 ssh2 Sep 20 12:47:50 cbear sshd[25376]: pam_unix(sshd:session): session opened for user tfergeson by (uid=0) UPDATES: Still occurring even after setting UseDNS no and commenting out #session optional pam_mail.so standard noenv This does not appear to be a network/dns related issue, as all services running on the machine are as responsive and accessible as ever, with the exception of sshd. Any thoughts on where to start?

  Read the article

• RSS feeds in Orchard

  - by Bertrand Le Roy

  When we added RSS to Orchard, we wanted to make it easy for any module to expose any contents as a feed. We also wanted the rendering of the feed to be handled by Orchard in order to minimize the amount of work from the module developer. A typical example of such feed exposition is of course blog feeds. We have an IFeedManager interface for which you can get the built-in implementation through dependency injection. Look at the BlogController constructor for an example: public BlogController( IOrchardServices services, IBlogService blogService, IBlogSlugConstraint blogSlugConstraint, IFeedManager feedManager, RouteCollection routeCollection) { If you look a little further in that same controller, in the Item action, you’ll see a call to the Register method of the feed manager: _feedManager.Register(blog); This in reality is a call into an extension method that is specialized for blogs, but we could have made the two calls to the actual generic Register directly in the action instead, that is just an implementation detail: feedManager.Register(blog.Name, "rss", new RouteValueDictionary { { "containerid", blog.Id } }); feedManager.Register(blog.Name + " - Comments", "rss", new RouteValueDictionary { { "commentedoncontainer", blog.Id } }); What those two effective calls are doing is to register two feeds: one for the blog itself and one for the comments on the blog. For each call, the name of the feed is provided, then we have the type of feed (“rss”) and some values to be injected into the generic RSS route that will be used later to route the feed to the right providers. This is all you have to do to expose a new feed. If you’re only interested in exposing feeds, you can stop right there. If on the other hand you want to know what happens after that under the hood, carry on. What happens after that is that the feedmanager will take care of formatting the link tag for the feed (see FeedManager.GetRegisteredLinks). The GetRegisteredLinks method itself will be called from a specialized filter, FeedFilter. FeedFilter is an MVC filter and the event we’re interested in hooking into is OnResultExecuting, which happens after the controller action has returned an ActionResult and just before MVC executes that action result. In other words, our feed registration has already been called but the view is not yet rendered. Here’s the code for OnResultExecuting: model.Zones.AddAction("head:after", html => html.ViewContext.Writer.Write( _feedManager.GetRegisteredLinks(html))); This is another piece of code whose execution is differed. It is saying that whenever comes time to render the “head” zone, this code should be called right after. The code itself is rendering the link tags. As a result of all that, here’s what can be found in an Orchard blog’s head section: <link rel="alternate" type="application/rss+xml"     title="Tales from the Evil Empire"     href="/rss?containerid=5" /> <link rel="alternate" type="application/rss+xml"     title="Tales from the Evil Empire - Comments"     href="/rss?commentedoncontainer=5" /> The generic action that these two feeds point to is Index on FeedController. That controller has three important dependencies: an IFeedBuilderProvider, an IFeedQueryProvider and an IFeedItemProvider. Different implementations of these interfaces can provide different formats of feeds, such as RSS and Atom. The Match method enables each of the competing providers to provide a priority for themselves based on arbitrary criteria that can be found on the FeedContext. This means that a provider can be selected based not only on the desired format, but also on the nature of the objects being exposed as a feed or on something even more arbitrary such as the destination device (you could imagine for example giving shorter text only excerpts of posts on mobile devices, and full HTML on desktop). The key here is extensibility and dynamic competition and collaboration from unknown and loosely coupled parts. You’ll find this pattern pretty much everywhere in the Orchard architecture. The RssFeedBuilder implementation of IFeedBuilderProvider is also a regular controller with a Process action that builds a RssResult, which is itself a thin ActionResult wrapper around an XDocument. Let’s get back to the FeedController’s Index action. After having called into each known feed builder to get its priority on the currently requested feed, it will select the one with the highest priority. The next thing it needs to do is to actually fetch the data for the feed. This again is a collaborative effort from a priori unknown providers, the implementations of IFeedQueryProvider. There are several implementations by default in Orchard, the choice of which is again done through a Match method. ContainerFeedQuery for example chimes in when a “containerid” parameter is found in the context (see URL in the link tag above): public FeedQueryMatch Match(FeedContext context) { var containerIdValue = context.ValueProvider.GetValue("containerid"); if (containerIdValue == null) return null; return new FeedQueryMatch { FeedQuery = this, Priority = -5 }; } The actual work is done in the Execute method, which finds the right container content item in the Orchard database and adds elements for each of them. In other words, the feed query provider knows how to retrieve the list of content items to add to the feed. The last step is to translate each of the content items into feed entries, which is done by implementations of IFeedItemBuilder. There is no Match method this time. Instead, all providers are called with the collection of items (or more accurately with the FeedContext, but this contains the list of items, which is what’s relevant in most cases). Each provider can then choose to pick those items that it knows how to treat and transform them into the format requested. This enables the construction of heterogeneous feeds that expose content items of various types into a single feed. That will be extremely important when you’ll want to expose a single feed for all your site. So here are feeds in Orchard in a nutshell. The main point here is that there is a fair number of components involved, with some complexity in implementation in order to allow for extreme flexibility, but the part that you use to expose a new feed is extremely simple and light: declare that you want your content exposed as a feed and you’re done. There are cases where you’ll have to dive in and provide new implementations for some or all of the interfaces involved, but that requirement will only arise as needed. For example, you might need to create a new feed item builder to include your custom content type but that effort will be extremely focused on the specialized task at hand. The rest of the system won’t need to change. So what do you think?

  Read the article

• Listing common SQL Code Smells.

  - by Phil Factor

  Once you’ve done a number of SQL Code-reviews, you’ll know those signs in the code that all might not be well. These ’Code Smells’ are coding styles that don’t directly cause a bug, but are indicators that all is not well with the code. . Kent Beck and Massimo Arnoldi seem to have coined the phrase in the "OnceAndOnlyOnce" page of www.C2.com, where Kent also said that code "wants to be simple". Bad Smells in Code was an essay by Kent Beck and Martin Fowler, published as Chapter 3 of the book ‘Refactoring: Improving the Design of Existing Code’ (ISBN 978-0201485677) Although there are generic code-smells, SQL has its own particular coding habits that will alert the programmer to the need to re-factor what has been written. See Exploring Smelly Code   and Code Deodorants for Code Smells by Nick Harrison for a grounding in Code Smells in C# I’ve always been tempted by the idea of automating a preliminary code-review for SQL. It would be so useful to trawl through code and pick up the various problems, much like the classic ‘Lint’ did for C, and how the Code Metrics plug-in for .NET Reflector by Jonathan 'Peli' de Halleux is used for finding Code Smells in .NET code. The problem is that few of the standard procedural code smells are relevant to SQL, and we need an agreed list of code smells. Merrilll Aldrich made a grand start last year in his blog Top 10 T-SQL Code Smells.However, I'd like to make a start by discovering if there is a general opinion amongst Database developers what the most important SQL Smells are. One can be a bit defensive about code smells. I will cheerfully write very long stored procedures, even though they are frowned on. I’ll use dynamic SQL occasionally. You can only use them as an aid for your own judgment and it is fine to ‘sign them off’ as being appropriate in particular circumstances. Also, whole classes of ‘code smells’ may be irrelevant for a particular database. The use of proprietary SQL, for example, is only a ‘code smell’ if there is a chance that the database will have to be ported to another RDBMS. The use of dynamic SQL is a risk only with certain security models. As the saying goes,  a CodeSmell is a hint of possible bad practice to a pragmatist, but a sure sign of bad practice to a purist. Plamen Ratchev’s wonderful article Ten Common SQL Programming Mistakes lists some of these ‘code smells’ along with out-and-out mistakes, but there are more. The use of nested transactions, for example, isn’t entirely incorrect, even though the database engine ignores all but the outermost: but it does flag up the possibility that the programmer thinks that nested transactions are supported. If anything requires some sort of general agreement, the definition of code smells is one. I’m therefore going to make this Blog ‘dynamic, in that, if anyone twitters a suggestion with a #SQLCodeSmells tag (or sends me a twitter) I’ll update the list here. If you add a comment to the blog with a suggestion of what should be added or removed, I’ll do my best to oblige. In other words, I’ll try to keep this blog up to date. The name against each 'smell' is the name of the person who Twittered me, commented about or who has written about the 'smell'. it does not imply that they were the first ever to think of the smell! Use of deprecated syntax such as *= (Dave Howard) Denormalisation that requires the shredding of the contents of columns. (Merrill Aldrich) Contrived interfaces Use of deprecated datatypes such as TEXT/NTEXT (Dave Howard) Datatype mis-matches in predicates that rely on implicit conversion.(Plamen Ratchev) Using Correlated subqueries instead of a join   (Dave_Levy/ Plamen Ratchev) The use of Hints in queries, especially NOLOCK (Dave Howard /Mike Reigler) Few or No comments. Use of functions in a WHERE clause. (Anil Das) Overuse of scalar UDFs (Dave Howard, Plamen Ratchev) Excessive ‘overloading’ of routines. The use of Exec xp_cmdShell (Merrill Aldrich) Excessive use of brackets. (Dave Levy) Lack of the use of a semicolon to terminate statements Use of non-SARGable functions on indexed columns in predicates (Plamen Ratchev) Duplicated code, or strikingly similar code. Misuse of SELECT * (Plamen Ratchev) Overuse of Cursors (Everyone. Special mention to Dave Levy & Adrian Hills) Overuse of CLR routines when not necessary (Sam Stange) Same column name in different tables with different datatypes. (Ian Stirk) Use of ‘broken’ functions such as ‘ISNUMERIC’ without additional checks. Excessive use of the WHILE loop (Merrill Aldrich) INSERT ... EXEC (Merrill Aldrich) The use of stored procedures where a view is sufficient (Merrill Aldrich) Not using two-part object names (Merrill Aldrich) Using INSERT INTO without specifying the columns and their order (Merrill Aldrich) Full outer joins even when they are not needed. (Plamen Ratchev) Huge stored procedures (hundreds/thousands of lines). Stored procedures that can produce different columns, or order of columns in their results, depending on the inputs. Code that is never used. Complex and nested conditionals WHILE (not done) loops without an error exit. Variable name same as the Datatype Vague identifiers. Storing complex data  or list in a character map, bitmap or XML field User procedures with sp_ prefix (Aaron Bertrand)Views that reference views that reference views that reference views (Aaron Bertrand) Inappropriate use of sql_variant (Neil Hambly) Errors with identity scope using SCOPE_IDENTITY @@IDENTITY or IDENT_CURRENT (Neil Hambly, Aaron Bertrand) Schemas that involve multiple dated copies of the same table instead of partitions (Matt Whitfield-Atlantis UK) Scalar UDFs that do data lookups (poor man's join) (Matt Whitfield-Atlantis UK) Code that allows SQL Injection (Mladen Prajdic) Tables without clustered indexes (Matt Whitfield-Atlantis UK) Use of "SELECT DISTINCT" to mask a join problem (Nick Harrison) Multiple stored procedures with nearly identical implementation. (Nick Harrison) Excessive column aliasing may point to a problem or it could be a mapping implementation. (Nick Harrison) Joining "too many" tables in a query. (Nick Harrison) Stored procedure returning more than one record set. (Nick Harrison) A NOT LIKE condition (Nick Harrison) excessive "OR" conditions. (Nick Harrison) User procedures with sp_ prefix (Aaron Bertrand) Views that reference views that reference views that reference views (Aaron Bertrand) sp_OACreate or anything related to it (Bill Fellows) Prefixing names with tbl_, vw_, fn_, and usp_ ('tibbling') (Jeremiah Peschka) Aliases that go a,b,c,d,e... (Dave Levy/Diane McNurlan) Overweight Queries (e.g. 4 inner joins, 8 left joins, 4 derived tables, 10 subqueries, 8 clustered GUIDs, 2 UDFs, 6 case statements = 1 query) (Robert L Davis) Order by 3,2 (Dave Levy) MultiStatement Table functions which are then filtered 'Sel * from Udf() where Udf.Col = Something' (Dave Ballantyne) running a SQL 2008 system in SQL 2000 compatibility mode(John Stafford)

  Read the article

• TS-7800 Hangs on bootup

  - by Reid

  I have a TS-7800, and it typically boots from the SD card inserted in it. When I tried to boot it up today, it hung on the syslog line. I am now having "Read only file system" problems. What has gone wrong? Bootup console: >> Copyright (c) 2008, Technologic Systems >> Booting from SD card... . . . . >> Booting to SD Card... INIT: version 2.86 booting Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. mount: can't find / in /etc/fstab or /etc/mtab Cleaning up ifupdown...rm: cannot remove `/etc/network/run/ifstate': Read-only file system Loading kernel modules...done. Checking all file systems... fsck 1.37 (21-Mar-2005) ... done. none on /dev/pts type devpts (rw,gid=5,mode=620) /etc/init.d/rcS: line 39: /tmp/.clean: Read-only file system Setting up networking...done. Setting up IP spoofing protection: rp_filter. Enabling packet forwarding...done. Configuring network interfaces...ifup: failed to open statefile /etc/network/run/ifstate: Read-only file system done. Starting portmap daemon: portmap. /etc/init.d/rcS: line 39: /tmp/.clean: Read-only file system /etc/init.d/rcS: line 24: /var/run/utmp: Read-only file system rm: cannot remove `/var/lib/urandom/random-seed': Read-only file system urandom start: failed. Recovering nvi editor sessions... done. INIT: Entering runlevel: 3 Starting system log daemon: syslogd . Starting kernel log daemon: klogd. Starting MTA: open: Read-only file system touch: cannot touch `/var/lib/exim4/config.autogenerated.tmp': Read-only file system chown: cannot access `/var/lib/exim4/config.autogenerated.tmp': No such file or directory chmod: cannot access `/var/lib/exim4/config.autogenerated.tmp': No such file or directory chmod: changing permissions of `/var/lib/exim4/config.autogenerated': Read-only file system /usr/sbin/update-exim4.conf: line 260: cannot create temp file for here document: Read-only file system /usr/sbin/update-exim4.conf: line 387: /var/lib/exim4/config.autogenerated.tmp: Read-only file system 2002-01-01 01:31:36 Cannot open main log file "/var/log/exim4/mainlog": Read-only file system: euid=0 egid=0 2002-01-01 01:31:36 non-existent configuration file(s): /var/lib/exim4/config.autogenerated.tmp 2002-01-01 01:31:36 Cannot open main log file "/var/log/exim4/mainlog": Read-only file system: euid=0 egid=0 exim: could not open panic log - aborting: see message(s) above Invalid new configfile /var/lib/exim4/config.autogenerated.tmp not installing /var/lib/exim4/config.autogenerated.tmp to /var/lib/exim4/config.autogenerated Starting internet superserver: inetd. Starting OpenBSD Secure Shell server: sshd. Starting NFS common utilities: statdStarting periodic command scheduler: cron/usr/sbin/cron: can't open or create /var/run/crond.pid: Read-only file system . Starting web server (apache2)...(30)Read-only file system: apache2: could not open error log file /var/log/apache2/error.log. Unable to open logs failed! Debian GNU/Linux 3.1 ts7800 ttyS0 ts7800 login:

  Read the article

• OpenSwan IPSec phase #2 complications

  - by XXL

  Phase #1 (IKE) succeeds without any problems (verified at the target host). Phase #2 (IPSec), however, is erroneous at some point (apparently due to misconfiguration on localhost). This should be an IPSec-only connection. I am using OpenSwan on Debian. The error log reads the following (the actual IP-addr. of the remote endpoint has been modified): pluto[30868]: "x" #2: initiating Quick Mode PSK+ENCRYPT+PFS+UP+IKEv2ALLOW+SAREFTRACK {using isakmp#1 msgid:5ece82ee proposal=AES(12)_256-SHA1(2)_160 pfsgroup=OAKLEY_GROUP_DH22} pluto[30868]: "x" #1: ignoring informational payload, type NO_PROPOSAL_CHOSEN msgid=00000000 pluto[30868]: "x" #1: received and ignored informational message pluto[30868]: "x" #1: the peer proposed: 0.0.0.0/0:0/0 - 0.0.0.0/0:0/0 pluto[30868]: "x" #3: responding to Quick Mode proposal {msgid:a4f5a81c} pluto[30868]: "x" #3: us: 192.168.1.76<192.168.1.76[+S=C] pluto[30868]: "x" #3: them: 222.222.222.222<222.222.222.222[+S=C]===10.196.0.0/17 pluto[30868]: "x" #3: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 pluto[30868]: "x" #3: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 pluto[30868]: "x" #1: ignoring informational payload, type NO_PROPOSAL_CHOSEN msgid=00000000 pluto[30868]: "x" #1: received and ignored informational message pluto[30868]: "x" #3: next payload type of ISAKMP Hash Payload has an unknown value: 97 X pluto[30868]: "x" #3: malformed payload in packet pluto[30868]: | payload malformed after IV I am behind NAT and this is all coming from wlan2. Here are the details: default via 192.168.1.254 dev wlan2 proto static 169.254.0.0/16 dev wlan2 scope link metric 1000 192.168.1.0/24 dev wlan2 proto kernel scope link src 192.168.1.76 metric 2 Output of ipsec verify: Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.37/K3.2.0-24-generic (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Two or more interfaces found, checking IP forwarding [OK] Checking NAT and MASQUERADEing [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] This is what happens when I run ipsec auto --up x: 104 "x" #1: STATE_MAIN_I1: initiate 003 "x" #1: received Vendor ID payload [RFC 3947] method set to=109 106 "x" #1: STATE_MAIN_I2: sent MI2, expecting MR2 003 "x" #1: received Vendor ID payload [Cisco-Unity] 003 "x" #1: received Vendor ID payload [Dead Peer Detection] 003 "x" #1: ignoring unknown Vendor ID payload [502099ff84bd4373039074cf56649aad] 003 "x" #1: received Vendor ID payload [XAUTH] 003 "x" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed 108 "x" #1: STATE_MAIN_I3: sent MI3, expecting MR3 004 "x" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_128 prf=oakley_sha group=modp1024} 117 "x" #2: STATE_QUICK_I1: initiate 010 "x" #2: STATE_QUICK_I1: retransmission; will wait 20s for response 010 "x" #2: STATE_QUICK_I1: retransmission; will wait 40s for response 031 "x" #2: max number of retransmissions (2) reached STATE_QUICK_I1. No acceptable response to our first Quick Mode message: perhaps peer likes no proposal 000 "x" #2: starting keying attempt 2 of at most 3, but releasing whack I have enabled NAT traversal in ipsec.conf accordingly. Here are the settings relative to the connection in question: version 2.0 config setup plutoopts="--perpeerlog" plutoopts="--interface=wlan2" dumpdir=/var/run/pluto/ nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn x authby=secret pfs=yes auto=add phase2alg=aes256-sha1;dh22 keyingtries=3 ikelifetime=8h type=transport left=192.168.1.76 leftsubnet=192.168.1.0/24 leftprotoport=0/0 right=222.222.222.222 rightsubnet=10.196.0.0/17 rightprotoport=0/0 Here are the specs provided by the other end that must be met for Phase #2: encryption algorithm: AES (128 or 256 bit) hash algorithm: SHA local ident1 (addr/mask/prot/port): (10.196.0.0/255.255.128.0/0/0) local ident2 (addr/mask/prot/port): (10.241.0.0/255.255.0.0/0/0) remote ident (addr/mask/prot/port): (x.x.x.x/x.x.x.x/0/0) (internal network or localhost) Security association lifetime: 4608000 kilobytes/3600 seconds PFS: DH group2 So, finally, what might be the cause of the issue that I am experiencing? Thank you.

  Read the article

• bluetooth not working on Ubuntu 13.10

  - by iacopo

  I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

  Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >