Search Results

Search found 3422 results on 137 pages for 'svn trunk'.

Page 107/137 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

• What is the correct iptables rule when NATing multiple private subnets?

  - by Jose Mendez

  I have a Centos minimal 6.5 acting as a router. eth0 is connected to a Cisco switch trunk port, allowing VLANs 200-213. I have several VLAN interfaces just as this link suggests: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/s2-networkscripts-interfaces_802.1q-vlan-tagging.html And have IPv4 forwarding, so all my network devices from any of the networks 200-213 can communicate with each other using this linux box as their router. Problem is, I need them to access the Internet, so I added the following rule: iptables -t nat -A POSTROUTING -s 192.168.0.0/16 -j SNAT --to 1.1.1.56 1.1.1.56 is the "outside" address. This works fine, devices connected to the internal networks can ping Intertnet addresses BUT, they stop being able to talk to each other across subnets, so 192.168.211.55 can ping 8.8.8.8, but can't talk to 192.168.213.5. As soon as I do a service iptables restart to remove the rule, I can start talking across internal subnets again. What would be the correct way to set up NAT for multiple private subnets? Or maybe the correct way to set up forwarding?

  Read the article

• Capistrano deploying to different servers with different authentication methods

  - by marimaf

  I need to deploy to 2 different server and these 2 servers have different authentication methods (one is my university's server and the other is an amazon web server AWS) I already have running capistrano for my university's server, but I don't know how to add the deployment to AWS since for this one I need to add ssh options for example to user the .pem file, like this: ssh_options[:keys] = [File.join(ENV["HOME"], ".ssh", "test.pem")] ssh_options[:forward_agent] = true I have browsed starckoverflow and no post mention about how to deal with different authentication methods this and this I found a post that talks about 2 different keys, but this one refers to a server and a git, both usings different pem files. This is not the case. I got to this tutorial, but couldn't find what I need. I don't know if this is relevant for what I am asking: I am working on a rails app with ruby 1.9.2p290 and rails 3.0.10 and I am using an svn repository Please any help os welcome. Thanks a lot

  Read the article

• development server?

  - by ajsie

  for a project there will be me and one more programmer to develop a web service. i wonder how the development environment should be like. cause we need central storage (documents, pictures, business materials etc), file version handling, lamp (testing the web service) etc. i have never set up an environment for this before and want to have suggestions from experienced people which tools to use for effective collaboration. what crossed my mind: seperate applications: - google wave (for communication forth and back, setting up guide lines, other information) - team viewer (desktop sharing) - skype (calling) vps (ubuntu server): - svn (version tracking) - ftp (central storage) - lamp (testing the web service) - ssh (managing the vps) is this an appropriate programming environment? and regarding the vps, is it best practice to use ONE vps for all tasks listed up there? all suggestions and feedbacks are welcome!

  Read the article

• Are SANs unreliable?

  - by chaos

  So at the place where I wear one of my various hats, this one representing a development rather than admin role, there's been an initiative to move to SANs. So far, I have been spectacularly unimpressed. First it was this behavior where, when MySQL databases are on the SAN, the first few tables that anything tries to hit after the system boots come up as nonexistent and MySQL has to be restarted before it realizes they're actually there. Then today, on multiple systems (including the primary SVN repository, ever-so-wonderfully) we get SAN mounts spewing IO errors and the filesystems going into read-only, which is the kind of behavior I expect from directly mounted naked disks, not fault-tolerant managed storage. Right now, I'm at the point where if I were putting together a project and somebody said "hey we should use SANs", my response would be "GTFO". So basically I want to know whether my experience is typical or even common, or whether I'm having some kind of freakishly bad luck with SANs. The systems these SANs are attached to are all CentOS machines, if that's relevant.

  Read the article

• Why use multiple partitions on a rhel server?

  - by Jakobud

  I'm about to reformat and reinstall CentOS onto an old server. The server runs on a modest 30 node small business network and has a variety of responsibilities including MySQL, a Samba share, DHCPd & SVN/Trac. The old sysadmin had this server setup with almost a dozen different partitions for various things. I'm trying to understand what the advantages of multiple partitions are as opposed to a just one filesystem at /. Speed? Flexibility? Security? It seems like if you misjudge the necessary size for any given partition and it ends up filling up too fast, it requires a sysadmin to go in and expand the partition, etc... Seems like it would be easier if everything was just one flat / filesystem. But I'm sure there are some advantages I'm not aware of. The server is currently running a handful of HDDs raided to ~2TB (raid 0).

  Read the article

• Configuring vlans on Cisco SG200 series switch with Ubuntu server

  - by nixnotwin

  I created a vlan on Ubuntu with vconfig tool with 21 as id and eth1 as the host port. I connected eth1 to one of the ports on the swtich (GE23) as all ports trunk by default. In the webgui I created a vlan named test with the id 21 and I made GE2 are port as an access port. In port to vlan mapping I selected vlan 21 and added it port GE2 by selecting untagged option. I have assigned 192.168.1.1/24 as the ip of eth1.21 on Ubuntu. If I connect another cleint pc to GE2 port with a ip of 192.168.1.2/24 I cannot ping the server ip (192.168.1.1/24). Ping from server to client also does not work. I inspected packets that are sent out eth1 on the server and I could see the vlan 21 tag. And I connect the other end of the cable to a different Linux pc and inspected the packets but no vlan tags can be seen. What could be preventing me from getting vlans working? Edit 1 screenshots:

  Read the article

• Differences in memory consumption between two identical D7 sites?

  - by aendrew

  I'm running Drupal on a news site that has a lot of different View blocks on the front page (~5 total, all cached). In trying to reduce the memory footprint of the site, I've checked out source from SVN to a local development install to try and convert some of those blocks into more optimized code. Here's the weird thing. Devel module lists memory consumption at 50mb on the Production site (Running Nginx, PHP 5.2.17, XCache and Zend Optimizer.) but only 14mb on my development site (Running Apache2, PHP 5.2.13 and XCache). These are nearly-identical versions of the same site — frankly, the Production site should use even less memory as I've disabled some of the modules running on the Dev site. Any idea why this might be the case?

  Read the article

• Centralized sudo sudoers file?

  - by Stefan Thyberg

  I am the admin of several different servers and currently there is a different sudoers file on each one. This is getting slightly out of hand as quite often I need to give someone permissions to do something with sudo but it only gets done on one server. Is there an easy way of editing the sudoers file just on my central server and then distributing it by SFTP or something like that to the other servers in an easy way? Mostly wondering how other sysadmins solve this problem, since the sudoers file doesn't seem to be remotely accessible with NIS, for example. Operating system is SUSE Linux Enterprise Server 11 64-bit, but it shouldn't matter. EDIT: Every machine will, for now, have the same sudoers file. EDIT2: The accepted answer's comment was the closest to what I actually went ahead and did. I am right now using an SVN-supported puppet-installation and after a few headaches, it's working very well.

  Read the article

• Possible to get IIS on Windows Server 2008 R2 to "port-forward" port 80 for certain domains to other

  - by Lasse V. Karlsen

  I have IIS set up on my server, but also Apache x2 (other products which comes with their own servers, cannot be integrated into IIS.) Is it possible for me to "port-forward" certain domains on port 80 (that IIS handles) to those other ports? For instance: www.vkarlsen.no - IIS svn.vkarlsen.no - port 81 on same machine teamcity.vkarlsen.no - port 82 on same machine Or do I just need to set up those domains and redirect to the correct port? I'd like the domain name and url to be transparent to the user, but perhaps that won't work. Can anyone shed some light on this?

  Read the article

• Are whole VM images backed up on Amazon EC2/S3?

  - by John

  I've been trying to get my head around Amazon Web Services as a VPS provider. My understanding is a EC2 instance running Windows is basically a Windows VM, very similar to renting a VPS from a more traditional hosting provider. I don't want to have complex backups, either to administer or to restore - if my restore involves installing SVN, MySQL, Jira, etc on a new box before I can even try to restore the backup then it's not great to me. What I really want is a service which backs up my entire VM... if the PC running the VPS dies then the VM image is installed on a new PC and off we go again. With Amazon being all about flexibility and elasticity, I wondered if they have this service? I can't figure it out from reading their docs.

  Read the article

• Slow git clone and fetch

  - by EtienneT

  I setuped gitosis on a linux server following this tutorial: http://scie.nti.st/2007/11/14/hosting-git-repositories-the-easy-and-secure-way We are using git on our windows machines with TortoiseGit and msysgit. Pushing changes to the server is pretty fast, but when we want to clone or fetch changes from the remote server, it begins really fast (800k/s) and then drop pretty fast to around 3 to 30k/s and it can take forever to update. git-pull for small update is fast, but as soon as we have to download something of more than a few MB, it is slow. We are switching from SVN to git and this is holding us back from using git full time. Thanks!

  Read the article

• What is the difference between Startup programs in windows and the same programs being started manually

  - by sup

  I am no Windows guy, but I am trying to get a seamless integration of Windows program through Virtual Box Windows guest onto my Ubuntu machine. I more or less followed this tutorial: https://nowhere.dk/articles/running-windows-applications-natively-with-seamlessrdp Basically I start up Windows in Virtual Box and then I try to launch an application (on Ubuntu host) like this: rdesktop -A -s "c:\Program Files\ThinLinc\WTSTools\seamlessrdpshell.exe notepad.exe" 192.168.123.103:3389 -u user -p password That just gives me full Windows desktop that I do not want. However, when I run (on the Windows guest) "c:\Program Files\ThinLinc\WTSTools\seamlessrdpshell.exe" "notepad" The command above works and I get just the window I want. Now, so I thought I would put this command into startup folder of the Windows machine and everything would be fine. But it says "Unable to set up the virtual channel". (by googling, I nailed it to this file: https://sourceforge.net/p/rdesktop/code/1686/tree/seamlessrdp/trunk/ServerExe/vchannel.c - the warning is triggered (by main.c in the same directory) when function vchannel_open() returns something that C interprets as yes for if condition). I have no idea why it works when I launch this command manually via a bat file and not when I put it to startup programs. Any ideas?

  Read the article

• Interrupted system call during "hg convert"

  - by Aaron Digulla

  When I run "hg convert" to convert a Subversion repository to Mercurial, I get this error: fetching revision log for "/trunk" from 1538 to 0 run hg sink post-conversion action Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 46, in _runcatch return _dispatch(ui, args) File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 454, in _dispatch return runcommand(lui, repo, cmd, fullargs, ui, options, d) File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 324, in runcommand ret = _runcommand(ui, options, cmd, d) File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 505, in _runcommand return checkargs() File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 459, in checkargs return cmdfunc() File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 453, in <lambda> d = lambda: util.checksignature(func)(ui, *args, **cmdoptions) File "/usr/lib/pymodules/python2.6/mercurial/util.py", line 386, in check return func(*args, **kwargs) File "/usr/lib/pymodules/python2.6/hgext/convert/__init__.py", line 229, in convert return convcmd.convert(ui, src, dest, revmapfile, **opts) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 398, in convert c.convert(sortmode) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 312, in convert parents = self.walktree(heads) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 109, in walktree commit = self.cachecommit(n) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 267, in cachecommit commit = self.source.getcommit(rev) File "/usr/lib/pymodules/python2.6/hgext/convert/subversion.py", line 433, in getcommit self._fetch_revisions(revnum, stop) File "/usr/lib/pymodules/python2.6/hgext/convert/subversion.py", line 814, in _fetch_revisions for entry in stream: File "/usr/lib/pymodules/python2.6/hgext/convert/subversion.py", line 122, in __iter__ entry = pickle.load(self._stdout) IOError: [Errno 4] Interrupted system call abort: Interrupted system call Apparently, it is possible to restart a read on EINTR but how would I do that with pickle.load()? Also I wonder where that signal comes from? I suspect it's SIGCHILD but shouldn't popen() handle that?

  Read the article

• Windows 7 offline files - work temporarily offline even if network connection works

  - by Robert

  Sometimes I am connected via VPN to a network containing the server where files are stored which are cached by Windows offline files feature. Sometimes the connection works good and working this way is not a problem - on other times working is quite a pain because of high latency when working with the files in the Windows explorer. Is there an interactive way how a user (with admin permissions) can temporary suspend online usage of offline files? I already activated the "Transparent caching" group policy feature (Computer Configuration Policies Administrative Templates Networks Offline Files) with a network latency of 200msec but from my experience even if I get ping times to the file server of less than 40msec online usage is quite tenacious. Setting low latency times at this point causes the offline files often to toggle which makes problems with some applications working with several files and requires them to be consistent (like SVN client).

  Read the article

• Abnormally high amount of Transmit discards reported by Solarwinds for multiple switches

  - by Jared

  I have several 3750X Cisco switches that, according to our Solarwinds NPM, are producing billions of transmit discards per day. I'm not sure why it's reporting these discards. Many of the ports on the 3750X's have 2960's connected to them and are hardcoded as trunk ports. Solarwinds NPM version 10.3 Cisco IOS version 12.2(58)SE2 Total output drops: 29139431: GigabitEthernet1/0/43 is up, line protocol is up (connected) Hardware is Gigabit Ethernet, address is XXXX (bia XXXX) Description: XXXX MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100/1000BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:47, output 00:00:50, output hang never Last clearing of "show interface" counters 1w4d Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 29139431 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 35000 bits/sec, 56 packets/sec 51376 packets input, 9967594 bytes, 0 no buffer Received 51376 broadcasts (51376 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 51376 multicast, 0 pause input 0 input packets with dribble condition detected 115672302 packets output, 8673778028 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out sh controllers gigabitEthernet 1/0/43 utilization: Receive Bandwidth Percentage Utilization : 0 Transmit Bandwidth Percentage Utilization : 0

  Read the article

• What linux permissions are need for www?

  - by Xeoncross

  I know that 777 is full read/write/execute permission for owner/group/other. So this doesn't seem to be needed as it leaves random users full permissions. What permissions are need to be used on /var/www so that... Source control like git or svn Normal users in a group like "websites" or added to "www-data" Servers like apache or lighthttpd And PHP/Perl/Ruby can all read, create, and run files there? If I'm correct, Ruby and PHP scripts are not "executed" directly - but passed to an interpreter. So there is no need for execute permission on files in /var/www. Therefore, it seems like the correct permission would be chmod -R 1660 which would make all files shareable by these four entities all files non-executable by mistake block everyone else from the directory entirely set the permission mode to "sticky" for all future files Is this correct? Update: I just realized that files and directories might need different permissions - I was talking about files above so i'm not sure what the directory permissions would need to be.

  Read the article

• Paint.NET equivalent for Linux?

  - by Macha

  On Windows, my favorite image editor is Paint.NET. However, on Linux, GIMP is as unfriendly as photoshop despite having less features. (i.e. It takes ages to load, their's far too much stuff). Most of my image editing is simple things where Photoshop or GIMP would be overkill. Paint.NET does not run on Wine or Mono. So is there any similar fast and simple but powerful image editor available for Linux? EDIT: There is a Mono version available, but I don't want to have to deal with installing svn versions of mono, and compiling the version myself.

  Read the article

• Debian Server Daemon: File sync

  - by Gehk

  Hello, I'm looking for a way to (auto) sync files on some pcs over the internet and save/backup them on my server. Just like Dropbox and other services like that. I found iFolder (by Novell), but it's not made for debian (i think it would still compile). I don't know if it's made for an webserver or just home server. Another way would be FTP, I don't know clients (i use ubuntu and windows on my pcs), which autoupload new/edited files. There is also svn/csv, but they are quite slow (afaik), and I don't know if there are suited for this. Someone got an idea? Thanks.

  Read the article

• BASH function not escaping control characters

  - by ehime

  Hey guys I have a function that I'm using to find stuff, but unfortunately anytime I pass it a control character ($intVal or testing : etc) it chokes. I was wondering what the fix was? I can understand that using $ or % or : etc in grep without escaping causes this issue, but since I'm passing it in by reference I'm not sure how to escape it... Anyway, here's the code. function ffind() { if [ $1 ] ; then find -type f | grep -ir '$1' * | grep -v '.svn' else echo "'$1' is not a valid resource" fi } Example(s): $ ffind $intVal '' is not a valid resource $ ffind "testing :" bash: [: testing: unary operator expected 'testing :' is not a valid resource

  Read the article

• How can you enable SMB2.0 on a router running DD-WRT?

  - by jeffreypriebe

  I think the steps are something like: Install DD-WRT on a router with an external hard-drive Install Optware to get Samba Upgrade to Samba 3.6 (the link shows Samba 3.5, but using the NSLU2 optware packages, you can get 3.6 with built-in SMB2.0) ...then a miracle occurs... Then you can use SMB2.0 to connect to your share What is step 4? I can't find it on forums, etc. Am using Microsoft Network monitor to check for SMB2.0 connection, I'm on Windows 7 and have tried network connections on wireless and gigabit wired to the router. No joy. I doubt it matters, but to get ahead of the questions: DD-WRT v24-sp2 (10/26/10) big (SVN revision 15508M NEWD-2 K2.6 Eko) on Cisco/Linksys E3000

  Read the article

• Uninstall php5 installed from source

  - by diegomichel

  I have tried to install php5 from source , and it worked... Then for some reason need to install the official packets, so i tried a make uninstall and for my surprise there is such make uninstall... so i tried delete all the installed files by hand. Then installed the official debian packages and it worked fine... till i need install sqlite module, which give me the following error: php --version PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/pdo_sqlite.so' - /usr/lib/php5/20090626/pdo_sqlite.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/sqlite.so' - /usr/lib/php5/20090626/sqlite.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP 5.3.1-5 with Suhosin-Patch (cli) (built: Feb 22 2010 22:46:05) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies So i remember that manual install i did, and i think there is some old lib installed causing that problem, the bad thing is that there is not such make uninstall on the source code of php5... php-5.2.13 > make uninstall make: *** No rule to make target `uninstall'. Stop. I have tried reinstall and purge all php related packages via aptitude with not success. OS: Debian Squeeze. uname -a Linux desktop 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 GNU/Linux Any idea how to fix that?

  Read the article

• What is it that automatically checks config changes (such as those in /etc) into git?

  - by Brandon

  I remember reading on the ubuntu forums some time ago about a program to automatically check configuration changes into version control for you. It was (of course) not Ubuntu-specific. I'm pretty sure it used git, though it may have been svn, or perhaps even able to work with multiple different VCSs. My Googling has turned up nothing, and I'd rather not roll my own script if someone has already done this well. Of course I could just manually check things in, but there are reasons I'd like it done automatically. (I'm actually planning to use this for my LastSession.plist file for Safari, so when the #@$%^*&! thing crashes, and I don't restore everything, and then Leopard crashes, the fact that it has such lousy session management won't mean I lose the dozens of windows with dozens of tabs I had open.)

  Read the article

• Setting up NFS server on Gentoo

  - by StackedCrooked

  I'm trying to set up an NFS server on a Gentoo VM. I've installed nfs-utils-1.2.2 and added the following line to the /etc/exports file: /root/svn 10.0.0.0/255.0.0.0(rw,sync,no_subtree_check) However, when I try to start the nfs service I get the following errors: gentoo-amd64-francis orig # /etc/init.d/nfs start FATAL: Could not load /lib/modules/2.6.24-9-pve/modules.dep: No such file or directory * Exporting NFS directories ... [ ok ] * Starting NFS mountd ... [ !! ] * Starting NFS daemon ... [ !! ] * Starting NFS smnotify ... [ ok ] It complains about not finding the /lib/modules/2.6.24-9-pve/modules.dep file, but the /lib/modules directory doesn't even exist on this machine. Can anyone help me getting it to work?

  Read the article

• Cannot access Network Shares on Windows Server 2008 running VisualSVN Server

  - by mwillmott

  I have installed VisualSVN server on Windows Server 2008. The server is part of a domain but not the domain controller, it is just a data server and now an SVN server. VisualSVN uses port 80 and can only be access from inside the network (i do i by going to the dns name of the server). However, ever since i have installed this, other computers on the network can no longer access the shared folders on the server EXCEPT the domain controller which has no problems accessing the shares. I am stumped, i am guessing it is something to do with Apache running and not using host-headers (or whatever the Apache equivalent may be) but just being bound to the servers DNS name or IP. Any suggestions?

  Read the article

• ffmpeg add two audio streams to video

  - by Tossin Hausen

  I tried this: ffmpeg -i /sdcard/video/transcode/video.avi -map 0:0,0 -i /sdcard/video/transcode/first.mp3 -map 1:0,1 -i /sdcard/video/transcode/second.mp3 -map 2:0,2 -acodec copy -vcodec py /sdcard/video/transcode/Output.avi to add two audio streams to one video file. But ffmpeg says the number of mappings should match the number of output streams. What is wrong here? I'm trying to work with an Android build of FFmepg "ffmpeg for android beta". "Does not work" means that this uncommunicative Android build of FFmpeg just stops without giving any error message. The -codec copy option does not work with this build. Now I tried the same set of files with the FFmpeg called command line tool that comes with Ubuntu 10. Something (can't say where it is from). The -codec copy option does not work with this FFmpeg too. Here the complete output: m30x:~/movie/Film$ ffmpeg -i input.avi -i first.mp3 -i second.mp3 -map 0 -map 1 -map 2 -acodec copy -vcodec copy output.avi FFmpeg version SVN-r0.5.9-4:0.5.9-0ubuntu0.10.04.1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.9-0ubuntu0.10.04.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jun 12 2012 16:27:34, gcc: 4.4.3 [NULL @ 0x93cfd10]looks like this file was encoded with (divx4/(old)xvid/opendivx) -> forcing low_delay flag Seems stream 0 codec frame rate differs from container frame rate: 30000.00 (30000/1) -> 25.00 (25/1) Input #0, avi, from 'input.avi': Duration: 01:30:33.00, start: 0.000000, bitrate: 901 kb/s Stream #0.0: Video: mpeg4, yuv420p, 576x432, 25 tbr, 25 tbn, 30k tbc Input #1, mp3, from 'first.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #1.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Input #2, mp3, from 'second.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #2.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Number of stream maps must match number of output streams Merging only one audio stream with the video stream works with Ubuntu and Android version of FFmpeg. Here the complete output: ffmpeg -i input.avi -i first.mp3 -map 0 -map 1 -acodec copy -vcodec copy output.avi FFmpeg version SVN-r0.5.9-4:0.5.9-0ubuntu0.10.04.1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.9-0ubuntu0.10.04.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jun 12 2012 16:27:34, gcc: 4.4.3 [NULL @ 0x9bfad10]looks like this file was encoded with (divx4/(old)xvid/opendivx) -> forcing low_delay flag Seems stream 0 codec frame rate differs from container frame rate: 30000.00 (30000/1) -> 25.00 (25/1) Input #0, avi, from 'input.avi': Duration: 01:30:33.00, start: 0.000000, bitrate: 901 kb/s Stream #0.0: Video: mpeg4, yuv420p, 576x432, 25 tbr, 25 tbn, 30k tbc Input #1, mp3, from 'first.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #1.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Output #0, avi, to 'output.avi': Stream #0.0: Video: mpeg4, yuv420p, 576x432, q=2-31, 90k tbn, 25 tbc Stream #0.1: Audio: libmp3lame, 22050 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #1.0 -> #0.1 Press [q] to stop encoding frame= 6157 fps=6156 q=-1.0 size= 31667kB time=246.28 bitrate=1053.3kbits/s Do you have an idea why it does not work with two audio streams? By the way, ffmpeg -i input_with_first_audio_stream.avi -i second.mp3 -acodec copy -vcodec copy output_two_audio_streams.avi -newaudio works with both versions of ffmpeg that I use, but the first audio stream is played too fast (x10 or more), while the second audio stream is played correct. Many thanks in advance and sorry for my unconventional question and outdated versions of ffmpeg. But I am a lamer and it is not so easy for me to compile from the source (especially for the Android version). I will try to compile an up to date version of ffmpeg with Ubuntu, but I don't have much free time.

  Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >