compatibility mode - Page 108

Git Diff with Beyond Compare

- by Avanst

I have succeeded in getting git to start Beyond Compare 3 as a diff tool however, when I do a diff, the file I am comparing against is not being loaded. Only the latest version of the file is loaded and nothing else, so there is nothing in the right pane of Beyond Compare. I am running git 1.6.3.1 with Cygwin with Beyond Compare 3. I have set up beyond compare as they suggest in the support part of their website with a script like such: #!/bin/sh # diff is called by git with 7 parameters: # path old-file old-hex old-mode new-file new-hex new-mode "path_to_bc3_executable" "$2" "$5" | cat Has anyone else encountered this problem and know a solution to this? Edit: I have followed the suggestions by VonC but I am still having exactly the same problem as before. I am kinda new to Git so perhaps I am not using the diff correctly. For example, I am trying to see the diff on a file with a command like such: git diff main.css Beyond Compare will then open and only display my current main.css in the left pane, there is nothing in the right pane. I would like the see my current main.css in the left pane compared to the HEAD, basically what I have last committed. My git-diff-wrapper.sh looks like this: #!/bin/sh # diff is called by git with 7 parameters: # path old-file old-hex old-mode new-file new-hex new-mode "c:/Program Files/Beyond Compare 3/BCompare.exe" "$2" "$5" | cat My git config looks like this for Diff: [diff] external = c:/cygwin/bin/git-diff-wrapper.sh

Read the article

Inactive area after device rotation

- by Sébastien

Hi all, I don't understand what's wrong in my very simple application with device rotation : I built my view with interface builder. (See screen capture here) I specified <key>UIInterfaceOrientation</key><string>UIInterfaceOrientationLandscapeRight</string> in my info.plist file. I had a (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation {return YES;} in my root view controller. The area on the left (shown in red on the capture), around 20 pixel width, keeps inactive (nothing append if I hit a button in this area). In fact the full screen is active only in portrait mode, in landscape right mode there is this 20 pixels width inactive area, in landscape left mode this inactive area is on the right, in portrait upside down mode this area is on the bottom. I read lots of posts and documentation about UIView rotation, but I did not find anything to solve this problem (I tried to play with view.frame and view.bounds without any success). Anybody has an idea ? Thanks a lot. Regards. Sébastien.

Read the article

ASP.NET - I am generating an .XLS file with a DLL, how do I grant permissions for writing to file? (

- by hamlin11

I'm generating an .XLS file with a DLL (Excel Library http://code.google.com/p/excellibrary/) I've added this DLL as a reference to my project. The code to save the .XLS to disk is running, but it's encountering a permissions issue. I've attempted to set full access for IUSRS, Network Service, and Everyone just to see if I could get it working, and none of these seems to make a difference. Here's where I'm trying to write the file: c:/temp/test1.xls Here's the error: [SecurityException: Request for the permission of type 'System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.] System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet) +0 System.Security.CodeAccessPermission.Demand() +54 System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) +2103 System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy) +138 System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share) +89 System.IO.File.Open(String path, FileMode mode, FileAccess access, FileShare share) +58 ExcelLibrary.Office.CompoundDocumentFormat.CompoundDocument.Create(String file) +88 ExcelLibrary.Office.Excel.Workbook.Save(String file) +73 CHC_Reports.LitAnalysis.CreateSpreadSheet_Click(Object sender, EventArgs e) in C:\Users\brian\Desktop\Enterprise Manager\CHC_Reports\LitAnalysis.aspx.vb:19 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +140 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +11041511 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +11041050 System.Web.UI.Page.ProcessRequest() +91 System.Web.UI.Page.ProcessRequest(HttpContext context) +240 ASP.litanalysis_aspx.ProcessRequest(HttpContext context) +52 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +599 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171 Any idea what I need to do to diagnose the permissions issue and allow the file creation? Thanks.

Read the article

How to use DLL reference with an ActiveX <object> via JavaScript

- by John Factorial

My question: how can I set an ActiveX object's property via JavaScript to an enum value found in a non-ActiveX DLL? Problem description: I am instantiating an ActiveX object with the following object tag: <object classid="clsid:F338193D-2491-4D7B-80CE-03487041A278" id="VideoCapture1" width="500" height="500"></object> (This is the guid for the 3rd party ActiveX I'm using, "VisioForge_Video_Capture_4.VFVideoCapture4X") I have example C# code for using this ActiveX, which I am porting to JavaScript. Code like this works just fine: VideoCapture1.Debug_Mode = true; var devcount = VideoCapture1.Video_CaptureDevices_GetCount(); var devs = []; for (var i =0; i < devcount; ++i) { devs[devs.length] = VideoCapture1.Video_CaptureDevices_GetItem(i); } ... etc ... However, VideoCapture1 has some settings which refer to a DLL enum, like so (C# code): VideoCapture1.Mode = VisioForge_Video_Capture_4.TxVFMode.Mode_Video_Preview; I can see in Visual Web Developer that TxVFMode.Mode_Video_Preview is value 1 in the enum. However, the following JS does not appear to set the Mode properly: VideoCapture1.Mode = 1; Does anyone know how I can set VideoCapture1.Mode to the enum value found in the TxVFMode? PS: In Visual Web Developer, when I "Go to definition" on TxVFMode, I get the Guid for the enum. I thought I could create an with this Guid or instantiate a VisioForge_Video_Capture_4.TxVFMode in JS, but neither gives me a usable object.

Read the article

How to handle activity life cycle involving sockets in Android?

- by Henrik

Hello all, I have an Android activity which in turn starts a thread. In the thread I open a persistent TCP socket connection. When the socket connects to the server dynamic data is downloaded. The thread sends messages using Handler-class to the activity when data has been received. Now if the user happens to switch from portrait to landscape mode the activity gets an onDestroy call. At this moment I close the socket and stop the thread. When Android has switched landscape mode it calls onCreate yet again and I have to do a socket re-connect. Also, all of the data the activity received needs to be downloaded once more because the server does not have the ability to know what has been sent before, i.e. there is no "resume" feature. Thus the problem is that there is alot of data which is resent all the time when landscape mode is changed. What are my options here? Should I create a service which handles the socket traffic towards the server thus I always got all the data which the server has sent in the service. Or should I disable landscape mode all together perhaps? Or would my best bet be to rewrite my server which is a VERY BIG job :-) All input is welcome :-) / Henrik

Read the article

Where to Store ID Field In Silverlight

- by Blake Blackwell

I am trying to use the MVVM pattern, and I am wondering where I place an ID value. Do I create a TextBlock that has its visibility property set to collapsed? Or is there a better place to store this kind of data? Currently the command parameter is set to: CommandParameter="{Binding ElementName=Name,Path=Text}" But I'd rather it be something like: CommandParameter="{Binding ElementName=Id,Path=Text}" I'm totally up for suggestions on what the best way there is to do this, since I'm new to this pattern and presentation language. <ListBox x:Name="MyListBox" ItemsSource="{Binding MyData, Mode=TwoWay}" BorderThickness="0"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <CheckBox x:Name="Visible" IsChecked="{Binding Visible, Mode=TwoWay}" Command="{Binding ElementName=MyListBox, Path=DataContext.MyCommand}" CommandParameter="{Binding ElementName=Name,Path=Text}" /> <TextBlock Text="{Binding Name}" /> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> EDIT: Option 1 <CheckBox x:Name="Visible" IsChecked="{Binding Visible, Mode=TwoWay}" Command="{Binding ElementName=MyListBox, Path=DataContext.MyCommand}" CommandParameter="{Binding Id}" /> This option gives me just the Id, which is useful in many situations. EDIT: Option 2 <CheckBox x:Name="Visible" IsChecked="{Binding Visible, Mode=TwoWay}" Command="{Binding ElementName=MyListBox, Path=DataContext.MyCommand}" CommandParameter="{Binding}" /> This option gives me the full model, which is even useful for my particular situation.

Read the article

Asynchronous event loop design and issues.

- by Artyom

Hello, I'm designing event loop for asynchronous socket IO using epoll/devpoll/kqueue/poll/select (including windows-select). I have two options of performing, IO operation: Non-blocking mode, poll on EAGAIN Set socket to non-blocking mode. Read/Write to socket. If operation succeeds, post completion notification to event loop. If I get EAGAIN, add socket to "select list" and poll socket. Polling mode: poll and then execute Add socket to select list and poll it. Wait for notification that it is readable writable read/write Post completion notification to event loop of sucseeds To me it looks like first would require less system calls when using in normal mode, especially for writing to socket (buffers are quite big). Also it looks like that it would be possible to reduce the overhead over number of "select" executions, especially it is nice when you do not have something that scales well as epoll/devpoll/kqueue. Questions: Are there any advantages of the second approach? Are there any portability issues with non-blocking operations on sockets/file descriptors over numerous operating systems: Linux, FreeBSD, Solaris, MacOSX, Windows. Notes: Please do not suggest using existing event-loop/socket-api implementations

Read the article

can I disable the "(Type e to repeat macro)" message in emacs?

- by lindes

Hi there, So, I've finally made the plunge, and have gotten to the state where I'm quite happy to have switched from vi and vim to emacs... I've been putting stuff in my .emacs file, learning how to evaluate things (not to mention becoming familiar with movement commands), etc. etc. etc. And now I have a problem with a require line in my .emacs file (a require statement*), which bombs out when I launch emacs (and generally fails to work). So, this lead me to the following situation: In the process of trying to debug the above situation, one of the steps I did was to open the file I was trying to require, and evaluate it bit by bit, using C-M-f and C-x C-e (and later just M-x eval-buffer), which all worked fine. But along the way of the section-by-section, I got tired of typing all those, and so I recorded a keyboard macro... C-x ( C-M-f C-x C-e C-x ) and then C-x e... which gave me a message in the minibuffer (I think I'm using the right name), saying (Type e to repeat macro). Which meant I could no longer see the resultant value of the evaluation of each section of code... which, while not critical in this case, I was liking having. Which leads me to the actual question: Is there a way to disable that message, and/or to cause the minibuffer to show multiple lines at once? I know about the *Messages* buffer, and that could have helped, I'm just wondering if there's a way to either disable that message, or otherwise make it coexist with other messages. Any suggestions? Thanks! lindes * - the problem at hand, which is not really my question, is that (require 'ruby-mode/ruby-mode) fails, even though emacs is definitely and successfully (per system call tracing) opening and reading the ruby-mode.el file. I presume this is because the provide line says just 'ruby-mode. I've found a solution for this, but if anyone can point me to any "best practices", I'd appreciate it.

Read the article

Html.ListBox() and MultiselectList

- by Ivan90

Hi guys, I've a little problem with an Html.ListBox! I am developing a personal blog in ASP.NET MVC 1.0 and I created an adminpanel where I can add and edit a post! During this two operations, I can add also tags! I think of use an Html.ListBox() helper to list all tags, and so I can select multiple tags to add in a post! The problem isn't during the add mode, but in the edit mode, where I have to pre-select post's tags! I read that I have to use a MultiSelectList and so in its constructor pass, tags' list and tag's list(pre-selected value). But I don't know how to use this class! I post, some code: This is my models method that get all list tags in selectlist public IEnumerable<SelectListItem> GetTagsListBox() { return from t in db.Tags orderby t.IDTag descending select new SelectListItem { Text = t.TagName, Value = t.IDTag.ToString(), }; } So in Edit (Get and Post), Add(Get and Post) I use a ViewData to pass this list in Html.ListBox(). ViewData["Tags"] = tagdb.GetTagsListBox(); And in my view <%=Html.ListBox("Tags",ViewData["Tags"] as SelectList) %> So with this code it's ok in Add Mode! But in Edit Mode I need to pre-select those values! So Now, of course I have to create a method that get all tagsbypostid! and then in ViewData what Must I to pass? Any suggest?

Read the article

NSOpenGLFullScreen and SetSystemUIMode freeze bug!?

- by Mattias

Hi! I have a really strange problem which is perfectly re-producable using sample code! If I use Apple's NSOpenGLFullScreen sample I can click a button to enter fullscreen OpenGL mode. However if I click the mouse in the area where the menubar would be if I was running windowed mode, the entire program freezes because I really activate the menu-choice behind the OpenGL screen, so to speak. The solution I have found after some Googling is to use SetSystemUIMode to hide the menubar. Also I want to initiate the application to fullscreen at startup by adding a call to EnterFullScreen after initialization. Entering FullScreen works perfectly, BUT - if I add the call to SetSystemUIMode I get a really strange error! The entire screen hangs, the animation stops and no mouse coordinates seem to be reported. If I then exit the Fullscreen mode and press the FullScreen button again everything works and the menubar is gone.. What could be wrong here? I mean it obviously works to remove the menubar in that manner and it obviously works to enter fullscreen mode like that (using Cocoa), but why doesn't the combination work!? Pleeease help :) Sincerely, / Mattias

Read the article

how to compare the checksums in a list corresponding to a file path with the file path in the operat

- by surab

Hi all, how to compare the checksums in a list corresponding to a file path with the file path in the operating system In Python? import os,sys,libxml2 files=[] sha1s=[] doc = libxml2.parseFile('files.xml') for path in doc.xpathEval('//File/Path'): files.append(path.content) for sha1 in doc.xpathEval('//File/Hash'): sha1s.append(sha1.content) for entry in zip(files,sha1s): print entry the files.xml contains <Files> <File> <Path>usr/share/doc/dialog/samples/form1</Path> <Type>doc</Type> <Size>1222</Size> <Uid>0</Uid> <Gid>0</Gid> <Mode>0755</Mode> <Hash>49744d73e8667d0e353923c0241891d46ebb9032</Hash> </File> <File> <Path>usr/share/doc/dialog/samples/form3</Path> <Type>doc</Type> <Size>1294</Size> <Uid>0</Uid> <Gid>0</Gid> <Mode>0755</Mode> <Hash>f30277f73e468232c59a526baf3a5ce49519b959</Hash> </File> </Files> I need to compare the sha1 checksum in between tags corresponding to the file specified in between the tags, with the same file path in base Operating system.

Read the article

How do I display a view as if it's the front page via a module?

- by Justin

I have a simple view that feeds a home page. I have a custom module that registers some specific URLs in hook_menu that I pass into my module so I can pass them as arguments into the view. I can get the module to display the view all right, but it doesn't use the teaser/is_front view that outputs when I access the home page. I looked through the APIs but I can't seem to figure out how I can output the view via my module as if it's the front page, meaning $is_front is true and the teasers would appear. The reason I'm not passing in the arguments via the URL bar into the view itself is: My argument list is known and finite The argument order is mixed, meaning I will sometimes have /argument1, /argument1/argument2 or just /argument2. I only want to capture the first level URL as an argument for specific, known strings (e.g. I don't want to pass /admin into my view but I do want to pass in /los-angeles, which I register in the menu system via hook_menu in my module) Here are some examples to make this more clear: /admin - loads the admin page /user - loads the login page /boston - passes into the first argument of the view; shows in front/teaser mode / - shows view with no arguments /bread - passes into argument 2 of the view; shows in front/teaser mode /boston/bread - Passes into argument 1 and 2 of the view; shows in front/teaser mode Maybe I'm going about this the wrong way? Or perhaps there is a way to have a module load a view and somehow set front/teaser mode? Details: Drupal 6, PHP 5, MySQL 5, Views, CCK

Read the article

Problem writing a snippet containing Emacs Lisp code

- by user388346

Hi all, I've been trying to make use of a cool feature of YASnippet: write snippets containing embedded Emacs Lisp code. There is a snippet for rst-mode that surrounds the entered text with "=" that is as long as the text such as in ==== Text ==== Based on this snippet, I decided to slightly modify it (with Elisp) so that it comments out these three lines depending on the major mode you are in (I thought that such a snippet would be useful to organize the source code). So I wrote this: ${1:`(insert comment-start)`} ${2:$(make-string (string-width text) ?\-)} $1 ${2:Text} $1 ${2:$(make-string (string-width text) ?\-)} $0 This code works relatively well except for one problem: the indentation of these three lines gets mixed up, depending on the major mode I'm in (e.g., in emacs-lisp-mode, the second and the third lines move more to the right than the first line). I think the source of the problem might have something to do with what comes after the string ${1: on the first line. If I add a character, I have no problem (i.e., all three lines are correctly aligned at the end of the snippet expansion). If I add a single space after this string, the misalignment problem still continues though. So my question is: do you know of any way of rewriting this snippet so that this misalignment does not arise? Do you know what's the source of this behaviour? Cheers,

Read the article

iPhone --- 3DES Encryption returns "wrong" results?

- by Jan Gressmann

Hello fellow developers, I have some serious trouble with a CommonCrypto function. There are two existing applications for BlackBerry and Windows Mobile, both use Triple-DES encryption with ECB mode for data exchange. On either the encrypted results are the same. Now I want to implent the 3DES encryption into our iPhone application, so I went straight for CommonCrypto: http://www.opensource.apple.com/source/CommonCrypto/CommonCrypto-32207/CommonCrypto/CommonCryptor.h I get some results if I use CBC mode, but they do not correspond with the results of Java or C#. Anyway, I want to use ECB mode, but I don't get this working at all - there is a parameter error showing up... This is my call for the ECB mode... I stripped it a little bit: const void *vplainText; plainTextBufferSize = [@"Hello World!" length]; bufferPtrSize = (plainTextBufferSize + kCCBlockSize3DES) & ~(kCCBlockSize3DES - 1); plainText = (const void *) [@"Hello World!" UTF8String]; NSString *key = @"abcdeabcdeabcdeabcdeabcd"; ccStatus = CCCrypt(kCCEncrypt, kCCAlgorithm3DES, kCCOptionECBMode, key, kCCKeySize3DES, nil, // iv, not used with ECB plainText, plainTextBufferSize, (void *)bufferPtr, // output bufferPtrSize, &movedBytes); t is more or less the code from here: http://discussions.apple.com/thread.jspa?messageID=9017515 But as already mentioned, I get a parameter error each time... When I use kCCOptionPKCS7Padding instead of kCCOptionECBMode and set the same initialization vector in C# and my iPhone code, the iPhone gives me different results. Is there a mistake by getting my output from the bufferPtr? Currently I get the encrypted stuff this way: NSData *myData = [NSData dataWithBytes:(const void *)bufferPtr length:(NSUInteger)movedBytes]; result = [[NSString alloc] initWithData:myData encoding:NSISOLatin1StringEncoding]; It seems I almost tried every setting twice, different encodings and so on... where is my error?

Read the article

static variable lose its value

- by user542719

I have helper class with this static variable that is used for passing data between two classes. public class Helper{ public static String paramDriveMod;//this is the static variable in first calss } this variable is used in following second class mathod public void USB_HandleMessage(char []USB_RXBuffer){ int type=USB_RXBuffer[2]; MESSAGES ms=MESSAGES.values()[type]; switch(ms) { case READ_PARAMETER_VALUE: // read parameter values switch(prm){ case PARAMETER_DRIVE_MODE: // paramet drive mode Helper.paramDriveMod =(Integer.toString(((USB_RXBuffer[4]<< 8)&0xff00))); System.out.println(Helper.paramDriveMod+"drive mode is selectd ");//here it shows the value that I need. ..........}}//let say end switch and method and the following is an third class method use the above class method public void buttonSwitch(int value) throws InterruptedException{ boolean bool=true; int c=0; int delay=(int) Math.random(); while(bool){ int param=3; PARAMETERS prm=PARAMETERS.values()[param]; switch(value){ case 0: value=1; while(c<5){ Thread.sleep(delay); protocol.onSending(3,prm.PARAMETER_DRIVE_MODE.ordinal(),dataToRead,dataToRead.length);//read drive mode System.out.println(Helper.paramDriveMod+" drive mode is ..........in wile loop");//here it shows null value }}//let say end switch and method what is the reason that this variable lose its value?

Read the article

XSLT: Using a different way of processing within the current way of processing.

- by krisvandenbergh

Below I'm trying to match certain nodes. <xsl:template match="nodes"> <element> <xsl:apply-templates select="nodes" mode="different" /> </element> </xsl:template> Now, there are multiple ways of processing for the same nodes. I want to use this different way of processing within the current way of processing. That's why I perform apply-templates on the same selection, which is nodes, however the mode is different now. Here's how the different mode could look like: <xsl:template match="nodes" mode="different">  </xsl:template> Now, this does not work. Only the first type of processing is processed and the apply-templates call is simply not applied. What am I doing wrong, how can I get what I want using XSLT? What could be another approach to solve this problem?

Read the article

Refactoring Tabs

- by Nimbuz

HTML: <ul> <li><a href="#tab1">tab1</a></li> <li><a href="#tab2">tab2</a></li> </ul> <div id="tab1" class="tab-content">content 1</div> <div id="tab2" class="tab-content">content 2</div> jQuery $('#mode li:first').addClass('active'); $('#mode li.active').append('<span class="arrow"> </span>'); $('#mode li a').click(function () { $('#mode li').removeClass('active') $('.arrow').remove(); $(this).parent().addClass('active').append('<span class="arrow"> </span>'); var a = $(this).attr('href'); $('.tab-content').hide(); $(a).show(); return false; }); .. works, but looking ugly. Can it be simplified/reduced further? Many thanks!

Read the article

What is a more "ruby way" to write this code?

- by steadfastbuck

This was a homework assignment for my students (I am a teaching assistant) in c and I am trying to learn Ruby, so I thought I would code it up. The goal is to read integers from a redirected file and print some simple information. The first line in the file is the number of elements, and then each integer resides on its own line. This code works (although perhaps inefficiently), but how can I make the code more Ruby-like? #!/usr/bin/ruby -w # first line is number of inputs (Don't need it) num_inputs = STDIN.gets.to_i # read inputs as ints h = Hash.new STDIN.each do |n| n = n.to_i h[n] = 1 unless h[n] and h[n] += 1 end # find smallest mode h.sort.each do |k,v| break puts "Mode is: #{k}", "\n" if v == h.values.max end # mode unique? v = h.values.sort print "Mode is unique: " puts v.pop == v.pop, "\n" # print number of singleton odds, # odd elems repeated odd number times in desc order # even singletons in desc order odd_once = 0 odd = Array.new even = Array.new h.each_pair do |k, v| odd_once += 1 if v == 1 and k.odd? odd << k if v.odd? even << k if v == 1 and k.even? end puts "Number of elements with an odd value that appear only once: #{odd_once}", "\n" puts "Elements repeated an odd number of times:" puts odd.sort.reverse, "\n" puts "Elements with an even value that appear exactly once:" puts even.sort.reverse, "\n" # print fib numbers in the hash class Fixnum def is_fib? l, h = 0, 1 while h <= self return true if h == self l, h = h, l+h end end end puts "Fibonacci numbers:" h.keys.sort.each do |n| puts n if n.is_fib? end

Read the article

rotating UITableViewController manually

- by lope

Hi there, I am trying to do something I am not really sure is possible :) I have application that is in portrait mode and doesn't react to device rotation. Almost all parts of app work best in portrait so I disabled autorotation. But one part should be viewed in landscape. I just drawed my view rotated by 90 degrees and with this forced user to rotate device (again no autorotation). Everything was ok until I added UITableViewController that is invoked from this (and only from this) rotated view. Table view is of course in portrait mode, so user has to rotate device again, which is not really user friendly experience. My problem is, how to manually rotate table view so it is in landscape mode without using autorotation feature. I was able to rotate it using transform, but I can't position it properly. Is this right way of doing this or did I missed something that would make this trivial task? I don't want to use autorotation because both part are pretty separated from each other and each of them would be almost useless in other's mode

Read the article

Strange Puzzle - Invalid memory access of location

- by Rob Graeber

The error message I'm getting consistently is: Invalid memory access of location 0x8 rip=0x10cf4ab28 What I'm doing is making a basic stock backtesting system, that is iterating huge arrays of stocks/historical data across various algorithms, using java + eclipse on the latest Mac Os X. I tracked down the code that seems to be causing it. A method that is used to get the massive arrays of data and is called thousands of times. Nothing is retained so I don't think there is a memory leak. However there seems to be a set limit of around 7000 times I can iterate over it before I get the memory error. The weird thing is that it works perfectly in debug mode. Does anyone know what debug mode does differently in Eclipse? Giving the jvm more memory doesn't help, and it appears to work fine using -xint. And again it works perfectly in debug mode. public static List<Stock> getStockArray(ExchangeType e){ List<Stock> stockArray = new ArrayList<Stock>(); if(e == ExchangeType.ALL){ stockArray.addAll(getStockArray(ExchangeType.NYSE)); stockArray.addAll(getStockArray(ExchangeType.NASDAQ)); }else if(e == ExchangeType.ETF){ stockArray.addAll(etfStockArray); }else if(e == ExchangeType.NYSE){ stockArray.addAll(nyseStockArray); }else if(e == ExchangeType.NASDAQ){ stockArray.addAll(nasdaqStockArray); } return stockArray; } A simple loop like this, iterated over 1000s of times, will cause the memory error. But not in debug mode. for (Stock stock : StockDatabase.getStockArray(ExchangeType.ETF)) { System.out.println(stock.symbol); }

Read the article

Validation in Silverlight

- by Timmy Kokke

Getting started with the basics Validation in Silverlight can get very complex pretty easy. The DataGrid control is the only control that does data validation automatically, but often you want to validate your own entry form. Values a user may enter in this form can be restricted by the customer and have to fit an exact fit to a list of requirements or you just want to prevent problems when saving the data to the database. Showing a message to the user when a value is entered is pretty straight forward as I’ll show you in the following example. This (default) Silverlight textbox is data-bound to a simple data class. It has to be bound in “Two-way” mode to be sure the source value is updated when the target value changes. The INotifyPropertyChanged interface must be implemented by the data class to get the notification system to work. When the property changes a simple check is performed and when it doesn’t match some criteria an ValidationException is thrown. The ValidatesOnExceptions binding attribute is set to True to tell the textbox it should handle the thrown ValidationException. Let’s have a look at some code now. The xaml should contain something like below. The most important part is inside the binding. In this case the Text property is bound to the “Name” property in TwoWay mode. It is also told to validate on exceptions. This property is false by default. <StackPanel Orientation="Horizontal"> <TextBox Width="150" x:Name="Name" Text="{Binding Path=Name, Mode=TwoWay, ValidatesOnExceptions=True}"/> <TextBlock Text="Name"/> </StackPanel> The data class in this first example is a very simplified person class with only one property: string Name. The INotifyPropertyChanged interface is implemented and the PropertyChanged event is fired when the Name property changes. When the property changes a check is performed to see if the new string is null or empty. If this is the case a ValidationException is thrown explaining that the entered value is invalid. public class PersonData:INotifyPropertyChanged { private string _name; public string Name { get { return _name; } set { if (_name != value) { if(string.IsNullOrEmpty(value)) throw new ValidationException("Name is required"); _name = value; if (PropertyChanged != null) PropertyChanged(this, new PropertyChangedEventArgs("Name")); } } } public event PropertyChangedEventHandler PropertyChanged=delegate { }; } The last thing that has to be done is letting binding an instance of the PersonData class to the DataContext of the control. This is done in the code behind file. public partial class Demo1 : UserControl { public Demo1() { InitializeComponent(); this.DataContext = new PersonData() {Name = "Johnny Walker"}; } } Error Summary In many cases you would have more than one entry control. A summary of errors would be nice in such case. With a few changes to the xaml an error summary, like below, can be added. First, add a namespace to the xaml so the control can be used. Add the following line to the header of the .xaml file. xmlns:Controls="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Data.Input" Next, add the control to the layout. To get the result as in the image showed earlier, add the control right above the StackPanel from the first example. It’s got a small margin to separate it from the textbox a little. <Controls:ValidationSummary Margin="8"/> The ValidationSummary control has to be notified that an ValidationException occurred. This can be done with a small change to the xaml too. Add the NotifyOnValidationError to the binding expression. By default this value is set to false, so nothing would be notified. Set the property to true to get it to work. <TextBox Width="150" x:Name="Name" Text="{Binding Name, Mode=TwoWay, ValidatesOnExceptions=True, NotifyOnValidationError=True}"/> Data annotation Validating data in the setter is one option, but not my personal favorite. It’s the easiest way if you have a single required value you want to check, but often you want to validate more. Besides, I don’t consider it best practice to write logic in setters. The way used by frameworks like WCF Ria Services is the use of attributes on the properties. Instead of throwing exceptions you have to call the static method ValidateProperty on the Validator class. This call stays always the same for a particular property, not even when you change the attributes on the property. To mark a property “Required” you can use the RequiredAttribute. This is what the Name property is going to look like: [Required] public string Name { get { return _name; } set { if (_name != value) { Validator.ValidateProperty(value, new ValidationContext(this, null, null){ MemberName = "Name" }); _name = value; if (PropertyChanged != null) PropertyChanged(this, new PropertyChangedEventArgs("Name")); } } } The ValidateProperty method takes the new value for the property and an instance of ValidationContext. The properties passed to the constructor of the ValidationContextclass are very straight forward. This part is the same every time. The only thing that changes is the MemberName property of the ValidationContext. Property has to hold the name of the property you want to validate. It’s the same value you provide the PropertyChangedEventArgs with. The System.ComponentModel.DataAnnotation contains eight different validation attributes including a base class to create your own. They are: RequiredAttribute Specifies that a value must be provided. RangeAttribute The provide value must fall in the specified range. RegularExpressionAttribute Validates is the value matches the regular expression. StringLengthAttribute Checks if the number of characters in a string falls between a minimum and maximum amount. CustomValidationAttribute Use a custom method to validate the value. DataTypeAttribute Specify a data type using an enum or a custom data type. EnumDataTypeAttribute Makes sure the value is found in a enum. ValidationAttribute A base class for custom validation attributes All of these will ensure that an validation exception is thrown, except the DataTypeAttribute. This attribute is used to provide some additional information about the property. You can use this information in your own code. [Required] [Range(0,125,ErrorMessage = "Value is not a valid age")] public int Age { It’s no problem to stack different validation attributes together. For example, when an Age is required and must fall in the range from 0 to 125: [Required, StringLength(255,MinimumLength = 3)] public string Name { Or in one row like this, for a required Name with at least 3 characters and a maximum of 255: Delayed validation Having properties marked as required can be very useful. The only downside to the technique described earlier is that you have to change the value in order to get it validated. What if you start out with empty an empty entry form? All fields are empty and thus won’t be validated. With this small trick you can validate at the moment the user click the submit button. <TextBox Width="150" x:Name="NameField" Text="{Binding Name, Mode=TwoWay, ValidatesOnExceptions=True, NotifyOnValidationError=True, UpdateSourceTrigger=Explicit}"/> By default, when a TwoWay bound control looses focus the value is updated. When you added validation like I’ve shown you earlier, the value is validated. To overcome this, you have to tell the binding update explicitly by setting the UpdateSourceTrigger binding property to Explicit: private void SubmitButtonClick(object sender, RoutedEventArgs e) { NameField.GetBindingExpression(TextBox.TextProperty).UpdateSource(); } This way, the binding is in two direction but the source is only updated, thus validated, when you tell it to. In the code behind you have to call the UpdateSource method on the binding expression, which you can get from the TextBox. Conclusion Data validation is something you’ll probably want on almost every entry form. I always thought it was hard to do, but it wasn’t. If you can throw an exception you can do validation. If you want to know anything more in depth about something I talked about in this article let me know. I might write an entire post to that.

Read the article

Make your CHM Help Files show HTML5 and CSS3 content

- by Rick Strahl

The HTML Help 1.0 specification aka CHM files, is pretty old. In fact, it's practically ancient as it was introduced in 1997 when Internet Explorer 4 was introduced. Html Help 1.0 is basically a completely HTML based Help system that uses a Help Viewer that internally uses Internet Explorer to render the HTML Help content. Because of its use of the Internet Explorer shell for rendering there were many security issues in the past, which resulted in locking down of the Web Browser control in Windows and also the Help Engine which caused some unfortunate side effects. Even so, CHM continues to be a popular help format because it is very easy to produce content for it, using plain HTML and because it works with many Windows application platforms out of the box. While there have been various attempts to replace CHM help files CHM files still seem to be a popular choice for many applications to display their help systems. The biggest alternative these days is no system based help at all, but links to online documentation. For Windows apps though it's still very common to see CHM help files and there are still a ton of CHM help out there and lots of tools (including our own West Wind Html Help Builder) that produce output for CHM files as well as Web output. Image is Everything and you ain't got it! One problem with the CHM engine is that it's stuck with an ancient Internet Explorer version for rendering. For example if you have help content that uses HTML5 or CSS3 content you might have an HTML Help topic like the following shown here in a full Web Browser instance of Internet Explorer: The page clearly uses some CSS3 features like rounded corners and box shadows that are rendered using plain CSS 3 features. Note that I used Internet Explorer on purpose here to demonstrate that IE9 on Windows 7 can properly render this content using some of the new features of CSS, but the same is true for all other recent versions of the major browsers (FireFox 3.1+, Safari 4.5+, WebKit 9+ etc.). Unfortunately if you take this nice and simple CSS3 content and run it through the HTML Help compiler to produce a CHM file the resulting output on the same machine looks a bit less flashy: All the CSS3 styling is gone and although the page display and functionality still works, but all the extra styling features are gone. This even though I am running this on a Windows 7 machine that has IE9 that should be able to render these CSS features. Bummer. Web Browser Control - perpetually stuck in IE 7 Mode The problem is the Web Browser/Shell Components in Windows. This component is and has been part of Windows for as long as Internet Explorer has been around, but the Web Browser control hasn't kept up with the latest versions of IE. In a nutshell the control is stuck in IE7 rendering mode for engine compatibility reasons by default. However, there is at least one way to fix this explicitly using Registry keys on a per application basis. The key point from that blog article is that you can override the IE rendering engine for a particular executable by setting one (or more) registry flags that tell the Windows Shell which version of the Internet Explorer rendering engine to load. An application that wishes to use a more recent version of Internet Explorer can then register itself during installation for the specific IE version desired and from then on the application will use that version of the Web Browser component. If the application is older than the specified version it falls back to the default version (IE 7 rendering). Forcing CHM files to display with IE9 (or later) Rendering Knowing that we can force the IE usage for a given process it's also possible to affect the CHM rendering by setting same keys on the executable that's hosting the CHM file. What that executable file is depends on the type of application as there are a number of ways that can launch the help engine. hh.exeThe standalone Windows CHM Help Viewer that launches when you launch a CHM from Windows Explorer. You can manually add hh.exe to the registry keys. YourApplication.exeIf you're using .NET or any tool that internally uses the hhControl ActiveX control to launch help content your application is your host. You should add your application's exe to the registry during application startup. foxhhelp9.exeIf you're building a FoxPro application that uses the built-in help features, foxhhelp9.exe is used to actually host the help controls. Make sure to add this executable to the registry. What to set You can configure the Internet Explorer version used for an application in the registry by specifying the executable file name and a value that specifies the IE version desired. There are two different sets of keys for 32 bit and 64 bit applications. 32 bit only or 64 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: hh.exe 32 bit on 64 bit machine: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: hh.exe Note that it's best to always set both values ideally when you install your application so it works regardless of which platform you run on. The value specified is a DWORD value and the interesting values are decimal 9000 for IE9 rendering mode depending on !DOCTYPE settings or 9999 for IE 9 standards mode always. You can use the same logic for 8000 and 8888 for IE8 and the final value of 7000 for IE7 (one has to wonder what they're going todo for version 10 to perpetuate that pattern). I think 9000 is the value you'd most likely want to use. 9000 means that IE9 will be used for rendering but unless the right doctypes are used (XHTML and HTML5 specifically) IE will still fall back into quirks mode as needed. This should allow existing pages to continue to use the fallback engine while new pages that have the proper HTML doctype set can take advantage of the newest features. Here's an example of how I set the registry keys in my Tarma Installmate registry configuration: Note that I set all three values both under the Software and Wow6432Node keys so that this works regardless of where these EXEs are launched from. Even though all apps are 32 bit apps, the 64 bit (the default one shown selected) key is often used. So, now once I've set the registry key for hh.exe I can now launch my CHM help file from Explorer and see the following CSS3 IE9 rendered display: Summary It sucks that we have to go through all these hoops to get what should be natural behavior for an application to support the latest features available on a system. But it shouldn't be a surprise - the Windows Help team (if there even is such a thing) has not been known for forward looking technologies. It's a pretty big hassle that we have to resort to setting registry keys in order to get the Web Browser control and the internal CHM engine to render itself properly but at least it's possible to make it work after all. Using this technique it's possible to ship an application with a help file and allow your CHM help to display with richer CSS markup and correct rendering using the stricter and more consistent XHTML or HTML5 doctypes. If you provide both Web help and in-application help (and why not if you're building from a single source) you now can side step the issue of your customers asking: Why does my help file look so much shittier than the online help… No more!© Rick Strahl, West Wind Technologies, 2005-2012Posted in HTML5 Help Html Help Builder Internet Explorer Windows Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Ops Center Solaris 11 IPS Repository Management: Using ISO Images

- by S Stelting

Please join us for a live WebEx presentation of this topic on Tuesday, November 20th at 9am MDT. Details for the call are provided below: https://oracleconferencing.webex.com/oracleconferencing/j.php?ED=209834017&UID=1512096072&PW=NYTVlZTYxMzdm&RT=MiMxMQ%3D%3D Meeting password: oracle123 Call-in toll-free number: 1-866-682-4770 International numbers: http://www.intercall.com/oracle/access_numbers.htm Conference Code: 762 9343 # Security Code: 7777 # With Enterprise Manager Ops Center 12c, you can provision, patch, monitor and manage Oracle Solaris 11 instances. To do this, Ops Center creates and maintains a Solaris 11 Image Packaging System (IPS) repository on the Enterprise Controller. During the Enterprise Controller configuration, you can load repository content directly from Oracle's Support Web site and subsequently synchronize the repository as new content becomes available. Of course, you can also use Solaris 11 ISO images to create and update your Ops Center repository. There are a few excellent reasons for doing this: You're running Ops Center in disconnected mode, and don't have Internet access on your Enterprise Controller You'd rather avoid the bandwidth associated with live synchronization of a Solaris 11 package repository This demo will show you how to use Solaris 11 ISO images to set up and update your Ops Center repository. Prerequisites This tip assumes that you've already installed the Enterprise Controller on a Solaris 11 OS instance and that you're ready for post-install configuration. In addition, there are specific Ops Center and OS version requirements depending on which version of Solaris 11 you plan to install.You can get full details about the requirements in the Release Notes for Ops Center 12c update 2. Additional information is available in the Ops Center update 2 Readme document. Part 1: Using a Solaris 11 ISO Image to Create an Ops Center Repository Step 1 – Download the Solaris 11 Repository Image The Oracle Web site provides a number of download links for official Solaris 11 images. Among those links is a two-part downloadable repository image, which provides repository content for Solaris 11 SPARC and X86 architectures. In this case, I used the Solaris 11 11/11 image. First, navigate to the Oracle Web site and accept the OTN License agreement: http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html Next, download both parts of the Solaris 11 repository image. I recommend using the Solaris 11 11/11 image, and have provided the URLs here: http://download.oracle.com/otn/solaris/11/sol-11-1111-repo-full.iso-ahttp://download.oracle.com/otn/solaris/11/sol-11-1111-repo-full.iso-b Finally, use the cat command to generate an ISO image you can use to create your repository: # cat sol-11-1111-repo-full.iso-a sol-11-1111-repo-full.iso-b > sol-11-1111-repo-full.iso The process is very similar if you plan to set up a Solaris 11.1 release in Ops Center. In that case, navigate to the Solaris 11 download page, accept the license agreement and download both parts of the Solaris 11.1 repository image. Use the cat command to create a single ISO image for Solaris 11.1 Step 2 – Mount the Solaris 11 ISO Image in your Local Filesystem Once you have created the Solaris 11 ISO file, use the mount command to attach it to your local filesystem. After the image has been mounted, you can browse the repository from the ./repo subdirectory, and use the pkgrepo command to verify that Solaris 11 recognizes the content: Step 3 – Use the Image to Create your Ops Center Repository When you have confirmed the repository is available, you can use the image to create the Enterprise Controller repository. The operation will be slightly different depending on whether you configure Ops Center for Connected or Disconnected Mode operation.For connected mode operation, specify the mounted ./repo directory in step 4.1 of the configuration wizard, replacing the default Web-based URL. Since you're synchronizing from an OS repository image, you don't need to specify a key or certificate for the operation. For disconnected mode configuration, specify the Solaris 11 directory along with the path to the disconnected mode bundle downloaded by running the Ops Center harvester script: Ops Center will run a job to import package content from the mounted ISO image. A synchronization job can take several hours to run – in my case, the job ran for 3 hours, 22 minutes on a SunFire X4200 M2 server. During the job, Ops Center performs three important tasks: Synchronizes all content from the image and refreshes the repository Updates the IPS publisher information Creates OS Provisioning profiles and policies based on the content When the job is complete, you can unmount the ISO image from your Enterprise Controller. At that time, you can view the repository contents in your Ops Center Solaris 11 library. For the Solaris 11 11/11 release, you should see 8,668 packages and patches in the contents. You should also see default deployment plans for Solaris 11 provisioning. As part of the repository import, Ops Center generates plans and profiles for desktop, small and large servers for the SPARC and X86 architecture. Part 2: Using a Solaris 11 SRU to update an Ops Center Repository It's possible to use the same approach to upgrade your Ops Center repository to a Solaris 11 Support Repository Update, or SRU. Each SRU provides packages and updates to Solaris 11 - for example, SRU 8.5 provided the packaged for Oracle VM Server for SPARC 2.2 SRUs are available for download as ISO images from My Oracle Support, under document ID 1372094.1. The document provides download links for all SRUs which have been released by Oracle for Solaris 11. SRUs are cumulative, so later versions include the packages from earlier SRUs. After downloading an ISO image for an SRU, you can mount it to your local filesystem using a mount command similar to the one shown for Solaris 11 11/11. When the ISO image is mounted to the file system, you can perform the Add Content action from the Solaris 11 Library to synchronize packages and patches from the mounted image. I used the same mount point, so the repository URL was file://mnt/repo once again: After the synchronization of an SRU is complete, you can verify its content in the Solaris 11 library using the search function. The version pattern is 0.175.0.#, where the # is the same value as the SRU. In this example, I upgraded to SRU 1. The update job ran in just under 8 minutes, and a quick search shows that 22 software components were added to the repository: It's also possible to search for "Support Repository Update" to confirm the SRU was successfully added to the repository. Details on any of the update content are available by clicking the "View Details" button under the Packages/Patches entry.

Read the article

Fun with Declarative Components

- by [email protected]

Use case background I have been asked on a number of occasions if our selectOneChoice component could allow random text to be entered, as well as having a list of selections available. Unfortunately, the selectOneChoice component only allows entry via the dropdown selection list and doesn't allow text entry. I was thinking of possible solutions and thought that this might make a good example for using a declarative component.My initial idea My first thought was to use an af:inputText to allow the text entry, and an af:selectOneChoice with mode="compact" for the selections. To get it to layout horizontally, we would want to use an af:panelGroupLayout with layout="horizontal". To get the label for this to line up correctly, we'll need to wrap the af:panelGroupLayout with an af:panelLabelAndMessage. This is the basic structure: <af:panelLabelAndMessage> <af:panelGroupLayout layout="horizontal"> <af:inputText/> <af:selectOneChoice mode="compact"/> </af:panelgroupLayout></af:panelLabelAndMessage> Make it into a declarative component One of the steps to making a declarative component is deciding what attributes we want to be able to specify. To keep this example simple, let's just have: 'label' (the label of our declarative component)'value' (what we want to bind to the value of the input text)'items' (the select items in our dropdown) Here is the initial declarative component code (saved as file "inputTextWithChoice.jsff"): <?xml version='1.0' encoding='UTF-8'?><jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"> <jsp:directive.page contentType="text/html;charset=utf-8"/> <af:componentDef var="attrs" componentVar="comp"> <af:xmlContent> <component xmlns="http://xmlns.oracle.com/adf/faces/rich/component"> <description>Input text with choice component.</description> <attribute> <description>Label</description> <attribute-name>label</attribute-name> <attribute-class>java.lang.String</attribute-class> </attribute> <attribute> <description>Value</description> <attribute-name>value</attribute-name> <attribute-class>java.lang.Object</attribute-class> </attribute> <attribute> <description>Choice Select Items Value</description> <attribute-name>items</attribute-name> <attribute-class>[[Ljavax.faces.model.SelectItem;</attribute-class> </attribute> </component> </af:xmlContent> <af:panelLabelAndMessage id="myPlm" label="#{attrs.label}" for="myIt"> <af:panelGroupLayout id="myPgl" layout="horizontal"> <af:inputText id="myIt" value="#{attrs.value}" partialTriggers="mySoc" label="myIt" simple="true" /> <af:selectOneChoice id="mySoc" label="mySoc" simple="true" mode="compact" value="#{attrs.value}" autoSubmit="true"> <f:selectItems id="mySIs" value="#{attrs.items}" /> </af:selectOneChoice> </af:panelGroupLayout> </af:panelLabelAndMessage> </af:componentDef></jsp:root> By having af:inputText and af:selectOneChoice both have the same value, then (assuming that this passed in as an EL expression) selecting something in the selectOneChoice will update the value in the af:inputText. To use this declarative component in a jspx page: <af:declarativeComponent id="myItwc" viewId="inputTextWithChoice.jsff" label="InputText with Choice" value="#{demoInput.choiceValue}" items="#{demoInput.selectItems}" /> Some problems arise At first glace, this seems to be functioning like we want it to. However, there is a side effect to having the af:inputText and af:selectOneChoice share a value, if one changes, so does the other. The problem here is that when we update the af:inputText to something that doesn't match one of the selections in the af:selectOneChoice, the af:selectOneChoice will set itself to null (since the value doesn't match one of the selections) and the next time the page is submitted, it will submit the null value and the af:inputText will be empty. Oops, we don't want that. Hmm, what to do. Okay, how about if we make sure that the current value is always available in the selection list. But, lets not render it if the value is empty. We also need to add a partialTriggers attribute so that this gets updated when the af:inputText is changed. Plus, we really don't want to select this item so let's disable it. <af:selectOneChoice id="mySoc" partialTriggers="myIt" label="mySoc" simple="true" mode="compact" value="#{attrs.value}" autoSubmit="true"> <af:selectItem id="mySI" label="Selected:#{attrs.value}" value="#{attrs.value}" disabled="true" rendered="#{!empty attrs.value}"/> <af:separator id="mySp" /> <f:selectItems id="mySIs" value="#{attrs.items}" /></af:selectOneChoice> That seems to be working pretty good. One minor issue that we probably can't do anything about is that when you enter something in the inputText and then click on the selectOneChoice, the popup is displayed, but then goes away because it has been replaced via PPR because we told it to with the partialTriggers="myIt". This is not that big a deal, since if you are entering something manually, you probably don't want to select something from the list right afterwards. Making it look like a single component. Now, let's play around a bit with the contentStyle of the af:inputText and the af:selectOneChoice so that the compact icon will layout inside the af:inputText, making it look more like an af:selectManyChoice. We need to add some padding-right to the af;inputText so there is space for the icon. These adjustments were for the Fusion FX skin. <af:inputText id="myIt" partialTriggers="mySoc" autoSubmit="true" contentStyle="padding-right: 15px;" value="#{attrs.value}" label="myIt" simple="true" /><af:selectOneChoice id="mySoc" partialTriggers="myIt" contentStyle="position: relative; top: -2px; left: -19px;" label="mySoc" simple="true" mode="compact" value="#{attrs.value}" autoSubmit="true"> <af:selectItem id="mySI" label="Selected:#{attrs.value}" value="#{attrs.value}" disabled="true" rendered="#{!empty attrs.value}"/> <af:separator id="mySp" /> <f:selectItems id="mySIs" value="#{attrs.items}" /></af:selectOneChoice> There you have it, a declarative component that allows for suggested selections, but also allows arbitrary text to be entered. This could be used for search field, where the 'items' attribute could be populated with popular searches. Lines of java code written: 0

Read the article

Why Is Faulty Behaviour In The .NET Framework Not Fixed?

- by Alois Kraus

Here is the scenario: You have a Windows Form Application that calls a method via Invoke or BeginInvoke which throws exceptions. Now you want to find out where the error did occur and how the method has been called. Here is the output we do get when we call Begin/EndInvoke or simply Invoke The actual code that was executed was like this: private void cInvoke_Click(object sender, EventArgs e) { InvokingFunction(CallMode.Invoke); } [MethodImpl(MethodImplOptions.NoInlining)] void InvokingFunction(CallMode mode) { switch (mode) { case CallMode.Invoke: this.Invoke(new MethodInvoker(GenerateError)); The faulting method is called GenerateError which does throw a NotImplementedException exception and wraps it in a NotSupportedException. [MethodImpl(MethodImplOptions.NoInlining)] void GenerateError() { F1(); } private void F1() { try { F2(); } catch (Exception ex) { throw new NotSupportedException("Outer Exception", ex); } } private void F2() { throw new NotImplementedException("Inner Exception"); } It is clear that the method F2 and F1 did actually throw these exceptions but we do not see them in the call stack. If we directly call the InvokingFunction and catch and print the exception we can find out very easily how we did get into this situation. We see methods F1,F2,GenerateError and InvokingFunction directly in the stack trace and we see that actually two exceptions did occur. Here is for comparison what we get from Invoke/EndInvoke System.NotImplementedException: Inner Exception StackTrace: at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous) at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args) at WindowsFormsApplication1.AppForm.InvokingFunction(CallMode mode) at WindowsFormsApplication1.AppForm.cInvoke_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) The exception message is kept but the stack starts running from our Invoke call and not from the faulting method F2. We have therefore no clue where this exception did occur! The stack starts running at the method MarshaledInvoke because the exception is rethrown with the throw catchedException which resets the stack trace. That is bad but things are even worse because if previously lets say 5 exceptions did occur .NET will return only the first (innermost) exception. That does mean that we do not only loose the original call stack but all other exceptions and all data contained therein as well. It is a pity that MS does know about this and simply closes this issue as not important. Programmers will play a lot more around with threads than before thanks to TPL, PLINQ that do come with .NET 4. Multithreading is hyped quit a lot in the press and everybody wants to use threads. But if the .NET Framework makes it nearly impossible to track down the easiest UI multithreading issue I have a problem with that. The problem has been reported but obviously not been solved. .NET 4 Beta 2 did not have changed that dreaded GetBaseException call in MarshaledInvoke to return only the innermost exception of the complete exception stack. It is really time to fix this. WPF on the other hand does the right thing and wraps the exceptions inside a TargetInvocationException which makes much more sense. But Not everybody uses WPF for its daily work and Windows forms applications will still be used for a long time. Below is the code to repro the issues shown and how the exceptions can be rendered in a meaningful way. The default Exception.ToString implementation generates a hard to interpret stack if several nested exceptions did occur. using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.Threading; using System.Globalization; using System.Runtime.CompilerServices; namespace WindowsFormsApplication1 { public partial class AppForm : Form { enum CallMode { Direct = 0, BeginInvoke = 1, Invoke = 2 }; public AppForm() { InitializeComponent(); Thread.CurrentThread.CurrentUICulture = CultureInfo.InvariantCulture; Application.ThreadException += new System.Threading.ThreadExceptionEventHandler(Application_ThreadException); } void Application_ThreadException(object sender, System.Threading.ThreadExceptionEventArgs e) { cOutput.Text = PrintException(e.Exception, 0, null).ToString(); } private void cDirectUnhandled_Click(object sender, EventArgs e) { InvokingFunction(CallMode.Direct); } private void cDirectCall_Click(object sender, EventArgs e) { try { InvokingFunction(CallMode.Direct); } catch (Exception ex) { cOutput.Text = PrintException(ex, 0, null).ToString(); } } private void cInvoke_Click(object sender, EventArgs e) { InvokingFunction(CallMode.Invoke); } private void cBeginInvokeCall_Click(object sender, EventArgs e) { InvokingFunction(CallMode.BeginInvoke); } [MethodImpl(MethodImplOptions.NoInlining)] void InvokingFunction(CallMode mode) { switch (mode) { case CallMode.Direct: GenerateError(); break; case CallMode.Invoke: this.Invoke(new MethodInvoker(GenerateError)); break; case CallMode.BeginInvoke: IAsyncResult res = this.BeginInvoke(new MethodInvoker(GenerateError)); this.EndInvoke(res); break; } } [MethodImpl(MethodImplOptions.NoInlining)] void GenerateError() { F1(); } private void F1() { try { F2(); } catch (Exception ex) { throw new NotSupportedException("Outer Exception", ex); } } private void F2() { throw new NotImplementedException("Inner Exception"); } StringBuilder PrintException(Exception ex, int identLevel, StringBuilder sb) { StringBuilder builtStr = sb; if( builtStr == null ) builtStr = new StringBuilder(); if( ex == null ) return builtStr; WriteLine(builtStr, String.Format("{0}: {1}", ex.GetType().FullName, ex.Message), identLevel); WriteLine(builtStr, String.Format("StackTrace: {0}", ShortenStack(ex.StackTrace)), identLevel + 1); builtStr.AppendLine(); return PrintException(ex.InnerException, ++identLevel, builtStr); } void WriteLine(StringBuilder sb, string msg, int identLevel) { foreach (string trimmedLine in SplitToLines(msg) .Select( (line) => line.Trim()) ) { for (int i = 0; i < identLevel; i++) sb.Append('\t'); sb.Append(trimmedLine); sb.AppendLine(); } } string ShortenStack(string stack) { int nonAppFrames = 0; // Skip stack frames not part of our app but include two foreign frames and skip the rest // If our stack frame is encountered reset counter to 0 return SplitToLines(stack) .Where((line) => { nonAppFrames = line.Contains("WindowsFormsApplication1") ? 0 : nonAppFrames + 1; return nonAppFrames < 3; }) .Select((line) => line) .Aggregate("", (current, line) => current + line + Environment.NewLine); } static char[] NewLines = Environment.NewLine.ToCharArray(); string[] SplitToLines(string str) { return str.Split(NewLines, StringSplitOptions.RemoveEmptyEntries); } } }

Search Results

Search found 12726 results on 510 pages for 'compatibility mode'.

Page 108/510 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115 | Next Page >

- by Avanst

- by Sébastien

- by hamlin11

- by John Factorial

- by Henrik

- by Blake Blackwell

- by Artyom

- by lindes

- by Ivan90

- by Mattias

- by surab

- by Justin

- by user388346

- by Jan Gressmann

- by user542719

- by krisvandenbergh

- by Nimbuz

- by steadfastbuck

- by lope

- by Rob Graeber

- by Timmy Kokke

- by Rick Strahl

- by S Stelting

- by [email protected]

- by Alois Kraus

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115 | Next Page >