Search Results

Search found 31973 results on 1279 pages for 'network library'.

Page 108/1279 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• Snow Leopard can see Windows shares in Finder but can't connect

  - by Randy Miller

  I have an iMac with the latest version of Snow Leopard on it. I have a NAS drive and a Windows machine that both show up in the Finder's 'Shared' section. However, if I click on them, Finder says "Connection Failed". Clicking on 'Connect As...' gives an error dialog that says "The server 'blah' may not exist or it is unavailable at this time." Points of interest: All machines are receiving their IP/DNS info from the router using DHCP. I have a Mac Mini on the same network that connects to the NAS drive and windows machine perfectly with no config (i.e. worked out of the box). Both Macs are on the same version of Snow Leopard. There is no password required to access the NAS share. I've never setup a WINS server on any machines and all machines are using 'workgroup' by default. I've tried putting "workgroup" in the Mac's workgroup entry and have tried leaving it blank, neither solves the problem. Here are some things I have tried: Finder-Connect To Server: smb:///share. This works, but by name does not. Terminal-mount_smbfs //@/share share. This also works by ip, but not be name, resulting in "mount_smbfs: server connection failed: No route to host". If I put the IP address of the NAS in the WINS server entry in the Mac's network setup, I can connect by name. It obviously seems to be a name resolution error, but I can't figure out why. The only thing that has changed since it used to work is that I got a new router that now gives out DHCP (all machines are dhcp clients) addresses of 192.168.x.x, but used to be 10.0.x.x. I've grep'd through everything that might have saved that old address, but can't find anything. It's also worth noting that the second Mac (the one that connects successfully) was added to the network after the router change. Please let me know if there are additional points of information needed to troubleshoot this further. Thanks, Randy

  Read the article

• How can you enable SMB2.0 on a router running DD-WRT?

  - by jeffreypriebe

  I think the steps are something like: Install DD-WRT on a router with an external hard-drive Install Optware to get Samba Upgrade to Samba 3.6 (the link shows Samba 3.5, but using the NSLU2 optware packages, you can get 3.6 with built-in SMB2.0) ...then a miracle occurs... Then you can use SMB2.0 to connect to your share What is step 4? I can't find it on forums, etc. Am using Microsoft Network monitor to check for SMB2.0 connection, I'm on Windows 7 and have tried network connections on wireless and gigabit wired to the router. No joy. I doubt it matters, but to get ahead of the questions: DD-WRT v24-sp2 (10/26/10) big (SVN revision 15508M NEWD-2 K2.6 Eko) on Cisco/Linksys E3000

  Read the article

• Oracle Executive Network CFO - Milano 22 Maggio 2014

  - by Paolo Leveghi

  L'evento era il secondo degli incontri dedicati agli Execuive dei clienti Oracle. Abbiamo ascoltaro il Prof. Andrea Dossi, SDA Professor di Amministrazione, Controllo, Finanza Aziendale e Immobiliare parlare di: Strategic Performance Measurement Systems e cicli di Pianificazione e Controllo: quali legami? Alla fine della discussione lo Chef Daniel Canzian, titolare del ristorante Daniel, una delle novità del panorama gastronomico milanese ha intrattenuto gli intervenuti con un momento di show cooking in cui ha mostrato a tutti come cucinare i piatti che poi sono stati serviti a cena. I partecipanti hanno seguito con nolto interesse entrambe le parti dell'evento,  che si è dimostrato un ottimo connubio fra momenti di apprendimento e momenti di networking.

  Read the article

• Static libraries, dynamic libraries, DLLs, entry points, headers ... how to get out of this alive?

  - by tunnuz

  Hello, I recently had to program C++ under Windows for an University project, and I'm pretty confused about static and dynamic libraries system, what the compiler needs, what the linker needs, how to build a library ... is there any good document about this out there? I'm pretty confused about the *nix library system as well (so, dylibs, the ar tool, how to compile them ...), can you point a review document about the current library techniques on the various architectures? Note: due to my poor knowledge this message could contain wrong concepts, feel free to edit it. Thank you Feel free to add more reference, I will add them to the summary. References Since most of you posted *nix or Windows specific references I will summarize here the best ones, I will mark as accepted answer the Wikipedia one, because is a good start point (and has references inside too) to get introduced to this stuff. Program Library Howto (Unix) Dynamic-Link Libraries (from MSDN) (Windows) DLL Information (StackOverflow) (Windows) Programming in C (Unix) An Overview of Compiling and Linking (Windows)

  Read the article

• Vlan and Switch setting - dummy

  - by Andras Sebestyen

  I need to speak tomorrow the network engineer and I would like to understand his so apologise for the Dummy question: In the school we have a cab with a 24 port Netgear manageable switch with an admin and curriculum VLAN settings. Usually, as I over heard, in the morning and around 4.30pm there are a slowdown period on the computers which connect to this switch. No one could track this back yet. Questions: What is the best way to track back this slowdown Would it be a temporary solution to physical separate the two network with 2 switches If that would work how can I link them together to be able to see the curriculum from the admin side. Do I need an extra router then? Too many questions but I have no clue where to start and the gentleman will be paid by hours... can you see where I am coming from?:) Could you guide me in the right direction please? Any comment would be appreciated and please send links if you down vote the question:)

  Read the article

• [GEEK SCHOOL] Network Security 8: Keep Your System Updated for Security and Stability

  - by Ciprian Rusen

  Another important step in securing any computer or device is setting up automated updates. Your device’s security relies on your operating system, apps, plug-ins, and programs always being up to date. For example, using outdated Internet browsers and plug-ins like Adobe Flash, Java, or Silverlight represents a big security problem. There are many websites on the Internet that exploit security bugs in your browser or the plug-ins you have installed.Click Here to Continue Reading

  Read the article

• [GEEK SCHOOL] Network Security 7: Using the Action Center for Extra Security and Maintenance

  - by Ciprian Rusen

  In this lesson we will talk about another lesser-known security tool in Windows – the “Action Center”. This tool that has an impact on both how secure your system is and how well it is running from a maintenance perspective. The Action Center first made its appearance all the way back in Windows XP as the “Windows Security Center” and was such through Vista until being renamed in Windows 7.Click Here to Continue Reading

  Read the article

• Xen private networking between multiple hosts

  - by Joe

  I have two physical hosts running Xen 3.2, sharing storage via iSCSI. On these two hosts are a number of domUs and I'd like to network them in multiple private networks so they can only contact other domUs on their private network. My understanding of the xen documentation suggests it's possible to do this within one dom0 (ie create virtual networks between domUs), but I've found nothing explaining how this can be implemented across multiple dom0s on different hosts. The only thing that jumps to mind is manually creating iptable rules to route data to the other host, but this seems to lack elegance and could quickly grow cumbersome. Any suggestions? All advice is much appreciated!

  Read the article

• How to build march-0 for different architectures?

  - by Victor Lin

  I have some dylibs to load from python with ctypes. I can load libbass.dylib without problem, but I can't load the self-compiled libmp3lame.dylib. Here is the error I get. OSError: dlopen(libmp3lame.dylib, 6): no suitable image found. Did find: libmp3lame.dylib: mach-o, but wrong architecture Then, I inspect the file type of those libs. Here is the result of libbass.dylib: libbass.dylib: Mach-O universal binary with 2 architectures libbass.dylib (for architecture i386): Mach-O dynamically linked shared library i386 libbass.dylib (for architecture ppc): Mach-O dynamically linked shared library ppc And here is the self-compiled one: libmp3lame.dylib: Mach-O 64-bit dynamically linked shared library x86_64 I did compile the lame library with the install instructions: ./configure make make install I'm new to mac system, here comes the problem: how to build the libmp3lame.dylib so that it supports different architecture I want? Thanks.

  Read the article

• VPN says "successfully connected" and I'm internet-connected, but I can't access network resources

  - by Al S.

  To explain, I'm a university student who uses the VPN to access sites like Nature, PhysicsToday, etc. I have this VPN working on Windows 7 and I've got access to nearly every journal. However on my Ubuntu 12.04 partition I'm able to connect to the internet (in fact I'm typing this while connected through the VPN presumably) but journals have locked me out. Is there a problem on my end that I can fix?

  Read the article

• Port 53 UDP Outgoing flood

  - by DanSpd

  Hello I am experiencing very huge problem. I have 4 computers in network, and from each a lot of data is being sent to ISP name servers. Sometimes data is being sent a little from each computer in network, sometimes it is just a lot of data from one computer. I have antivirus (Avast) and malware scan (SpyBot) I know port 53 UDP is dns which resolves domain IP so its' needed. Also I have read that ISP name server might have been infected. So what is the best thing to do in this situation. Also sometimes internet starts to lag really because of port 53

  Read the article

• The best way to build iPhone/iPad static libraries?

  - by Derek Clarkson

  Hi everyone, I have a couple of static Phone/iPad libraries I an working on. The problem I am looking for advise on is the best way to package the libraries. My objective is to make it easy to use the libraries in other projects and include the correct one in a build with minimal problems. To make it more interesting I currently build 4 versions of each library as follows armv6/armv7 release (devices) i386 release (simulator) armv6/armv7 debug (devices) i386 debug (simulator) The difference between the release and debug versions is that the debug versions contain a lot of NSLog(...) code which enables people to see whats going on internally as an aid to debugging. Currently when I build the whole projects I arrange the libraries into two directories like this: release lib-device.a lib-simulator.a debug lib-device.a lib-simulator.a This works ok except that when include in projects, both paths are added to the library search path and switching a target from one to the other is a pain. Or alternatively I end up with two targets. The alternative I am thinking of is to change the directories like this: release device lib.a simulator lib.a debug device lib.a simulator lib.a In playing with XCode is appears that all xcode uses the lbrary references of a project for is to get the name of the library file, which it then looks up in the library paths. Thus by parameterising the library path with the current built type and target device, I can effectively auto switch. What do you guys think? Is there a better way to do this? ciao Derek

  Read the article

• Oracle Technology Network April 2012 Special Offers

  - by programmarketingOTN

  Several of our books publishing partners have added new titles to the list of books they are offering discounts on.  To see full details and get discount links/codes please visit the OTN Member Discount page.  The Oracle store has also extended their 15% discount until the end of the month as well.  Happy Shopping!Oracle Press - Effective MySQL: Backup and Recovery Oracle Database 11g Performance Tuning Tips & Techniques Packt Publishing - Oracle WebCenter 11g PS3 Administration Cookbook Oracle Service Bus 11g Development Cookbook Pearson Java Application Architecture

  Read the article

• How does one network at software conferences?

  - by Billy ONeal

  Well... I'm still at Microsoft TechEd -- and the response to my last question was overwhelmingly "networking is the most useful part of software conferences". Problem: I have no idea how to even approach that task. I've always been kind of an introvert. At school and at work I've generally not had issues because there are enough extroverts around that approach me that I've made some awesome friends over the years. However, at conferences, it seems most are introverted like myself, and those who aren't seem to be salespeople. The couple of times I've felt okay approaching people it's been after a session where there's been healthy discussion throughout the whole room, and just when I get the nerve to go up and talk to some people, they leave and go on to other things. Are there books I can read? Advice I can take? Anything as far as approaching people one does not know? 'Cause every time I try I just feel like an awkward mess. :( (Oddly enough, I don't have problems speaking to a group of people -- it's the one-on-one things that trip me up :P) (Oh, and by the way, if anyone from here is also there and would like to meet to talk about things, I'm game :P)

  Read the article

• How to build mach-0 for different architectures?

  - by Victor Lin

  I have some dylibs to load from python with ctypes. I can load libbass.dylib without problem, but I can't load the self-compiled libmp3lame.dylib. Here is the error I get. OSError: dlopen(libmp3lame.dylib, 6): no suitable image found. Did find: libmp3lame.dylib: mach-o, but wrong architecture Then, I inspect the file type of those libs. Here is the result of libbass.dylib: libbass.dylib: Mach-O universal binary with 2 architectures libbass.dylib (for architecture i386): Mach-O dynamically linked shared library i386 libbass.dylib (for architecture ppc): Mach-O dynamically linked shared library ppc And here is the self-compiled one: libmp3lame.dylib: Mach-O 64-bit dynamically linked shared library x86_64 I did compile the lame library with the install instructions: ./configure make make install I'm new to mac system, here comes the problem: how to build the libmp3lame.dylib so that it supports different architecture I want? Thanks.

  Read the article

• SQL SERVER Mirroring Configured Without Domain The server network address TCP://SQLServerName:5023

  Regular readers of my blog will be aware of my friend who called me few days ago with very a funny SQL Problem SQL SERVER SSMS Query Command(s) completed successfully without ANY Results. This time, it did not take long before he called me up with another interesting problem, although the issue he was [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Ad-hoc connection between iPhone and Macbook Pro

  - by Phil Nash

  I sometimes find it useful to connect my iPhone to my Macbook Pro by creating an ad-hoc wireless network from the MBP and connecting to that from the iPhone. However, what I find is that sometimes this works and sometimes it doesn't. When it's not working the symptoms are usually that I see the ad-hoc SSID in the list of available networks on the iPhone, can connect to it from there (including entering my WEP key), and it shows up as the wifi network in use. However I don't get the wifi symbol in the taskbar (it remains as 3G) and attempting to use the connection (e.g. trying to connect to iTunes or Keynote using their respective Remote apps) fails saying that there is so wifi connection. I've tried rebooting both the iPhone and the MBP, recreating networks with different SSIDs and tried different channels - all to no avail! I'm especially puzzled that (a) sometimes it works just fine first time and (b) the Settings app seems to think its all connected fine. Is there anything else I should be trying?

  Read the article

• Why do my Application Compatibility Toolkit Data Collectors fail to write to my ACT Log Share?

  - by Jay Michaud

  I am trying to get the Microsoft Application Compatibility Toolkit 5.6 (version 5.6.7320.0) to work, but I cannot get the Data Collectors to write to the ACT Log Share. The configuration is as follows. Machine: ACT-Server Domain: mydomain.example.com OS: Windows 7 Enterprise 64-bit Edition Windows Firewall configuration: File and Printer Sharing (SMB-In) is enabled for Public, Domain, and Private networks ACT Log Share: ACT Share permissions*: Group/user names Allow permissions --------------------------------------- Everyone Full Control Administrator Full Control Domain Admins Full Control Administrators Full Control ANONYMOUS LOGON Full Control Folder permissions*: Group/user name Allow permissions Apply to ------------------------------------------------- ANONYMOUS LOGON Read, write & execute This folder, subfolders, and files Domain Admins Full control This folder, subfolders, and files Everyone Read, write & execute This folder, subfolders, and files Administrators Full control This folder, subfolders, and files CREATOR OWNER Full control Subfolders and files SYSTEM Full control This folder, subfolders, and files INTERACTIVE Traverse folder / This folder, subfolders, and files execute file, List folder / read data, Read attributes, Read extended attributes, Create files / write data, Create folders / append data, Write attributes, Write extended attributes, Delete subfolders and files, Delete, Read permissions SERVICE (same as INTERACTIVE) BATCH (same as INTERACTIVE) *I am fully aware that these permissions are excessive, but that is beside the point of this question. Some of the clients running the Data Collector are domain members, but some are not. I am working under the assumption that this is a Windows file sharing permission issue or a network access policy issue, but of course, I could be wrong. It is my understanding that the Data Collector runs in the security context of the SYSTEM account, which for domain members appears on the network as MYDOMAIN\machineaccount. It is also my understanding from reading numerous pieces of documentation that setting the ANONYMOUS LOGON permissions as I have above should allow these computer accounts and non-domain-joined computers to access the share. To test connectivity, I set up the Windows XP Mode virtual machine (VM) on ACT-Server. In the VM, I opened a command prompt running as SYSTEM (using the old "at" command trick). I used this command prompt to run explorer.exe. In this Windows Explorer instance, I typed \ACT-Server\ACT into the address bar, and then I was prompted for logon credentials. The goal, though, was not to be prompted. I also used the "net use /delete" command in the command prompt window to delete connections to the ACT-Server\IPC$ share each time my connection attempt failed. I have made sure that the appropriate exceptions are Since ACT-Server is a domain member, the "Network access: Sharing and security model for local accounts" security policy is set to "Classic - local users authenticate as themselves". In spite of this, I still tried enabling the Guest account and adding permissions for it on the share to no effect. What am I missing here? How do I allow anonymous logons to a shared folder as a step toward getting my ACT Data Collectors to deposit their data correctly? Am I even on the right track, or is the issue elsewhere?

  Read the article

• Creating a Hello World library function in assembly and calling it from C#

  - by Filip Ekberg

  Let's say we use NASM as they do in this answer: how to write hellow world in assembly under windows. I got a couple of thoughts and questions regarding assembly combined with c# or any other .net languages for that matter. First of all I want to be able to create a library that has the following function HelloWorld that takes this parameter: Name In C# the method signature would looke like this: void HelloWorld(string name) and it would print out something like Hello World from name I've searched around a bit but can't find that much good and clean material for this to get me started. I know some basic assembly from before mostly gasthough. So any pointers in the right direction is very much apprechiated. To sum it up Create a function in ASM ( NASM ) that takes one or more parameters Compile and create a library of the above functionality Include the library in any .net language Call the included library function Bonus features How does one handle returned values? Is it possible to write the ASM-method inline? When creating libraries in assembly or c, you do follow a certain "pre defined" way, the c calling convetion, correct?

  Read the article

• Network Authentication when running exe from WMI

  - by Andy

  Hi, I have a C# exe that needs to be run using WMI and access a network share. However, when I access the share I get an UnauthorizedAccessException. If I run the exe directly the share is accessible. I am using the same user account in both cases. There are two parts to my application, a GUI client that runs on a local PC and a backend process that runs on a remote PC. When the client needs to connect to the backend it first launches the remote process using WMI (code reproduced below). The remote process does a number of things including accessing a network share using Directory.GetDirectories() and reports back to the client. When the remote process is launched automatically by the client using WMI, it cannot access the network share. However, if I connect to the remote machine using Remote Desktop and manually launch the backend process, access to the network share succeeds. The user specifed in the WMI call and the user logged in for the Remote Desktop session are the same, so the permissions should be the same, shouldn't they? I see in the MSDN entry for Directory.Exists() it states "The Exists method does not perform network authentication. If you query an existing network share without being pre-authenticated, the Exists method will return false." I assume this is related? How can I ensure the user is authenticated correctly in a WMI session? ConnectionOptions opts = new ConnectionOptions(); opts.Username = username; opts.Password = password; ManagementPath path = new ManagementPath(string.Format("\\\\{0}\\root\\cimv2:Win32_Process", remoteHost)); ManagementScope scope = new ManagementScope(path, opts); scope.Connect(); ObjectGetOptions getOpts = new ObjectGetOptions(); using (ManagementClass mngClass = new ManagementClass(scope, path, getOpts)) { ManagementBaseObject inParams = mngClass.GetMethodParameters("Create"); inParams["CommandLine"] = commandLine; ManagementBaseObject outParams = mngClass.InvokeMethod("Create", inParams, null); }

  Read the article

• NIC: Changing Link Speed & Duplex to Full Duplex Is Drastically Slower

  - by rism

  I have an old Win Xp box with a 100 PRO/100 VE NIC and connecting to a Win 7 box with gigabit NIC via an ASUS gigabit router and peer to peer. I was getting 76% network utilisation on the XP machine using AUTO as the value for Link Speed and Duplex which is fine. But I decided to see what would happen if i selected Full Duplex 100Mbps on the XP box. I thought at worst it would be as good as auto detect since the Win 7 box it's transferring to is faster. Instead network utilisation dropped to 0.12% (as in a 10th of a percent) and the transfers just timed out. No biggie to reverse back to Auto but my question is why is full duplex such a dog? Im not "stuck" but just dont understand. There are only 2 machines here connecting through a router so i cant see how that would cause alot of collisions etc (if thats the problem).

  Read the article

• Multiple vulnerabilities in Network Time Protocol (NTP)

  - by chandan

  CVE DescriptionCVSSv2 Base ScoreComponentProduct and Resolution CVE-2009-0021 Improper Authentication vulnerability 5.0 Firmware SPARC T3-4 SPARC: 147317-01 SPARC T3-2 SPARC: 147316-01 SPARC T3-1B SPARC: 147318-01 SPARC T3-1 SPARC: 147315-01 Netra SPARC T3-1B SPARC: 147320-01 Netra SPARC T3-1 SPARC: 147319-01 Netra SPARC T3-1BA SPARC: 144609-07 CVE-2009-0159 Buffer Overflow vulnerability 6.8 CVE-2009-3563 Denial of Service (DoS) vulnerability 6.4 This notification describes vulnerabilities fixed in third-party components that are included in Sun's product distribution.Information about vulnerabilities affecting Oracle Sun products can be found on Oracle Critical Patch Updates and Security Alerts page.

  Read the article

• Support TrendNet TEW-643PI Wireless N network card

  - by Matthew Rigdon

  Hello, Has anyone been able to get a TrendNet TEW-643PI Wireless N card working under UBUNTU, if so what drivers did you use and where did you find them. I have this card and would really like to be able to use it in my computer. I found drivers that may work but dont know how to get ubuntu to pick up the drivers. I have tried the Additional Drivers option but cannot seem to get ubuntu to pick up the drivers. Thanks.

  Read the article

• Authorization error when testing FTP to UNC

  - by user64204

  We have a Windows Server 2008 R2 with Active Directory (hereafter called DC) running as a domain controller on which we have IIS and an FTP site installed. We have a second Server 2008 (hereafter called SHARE) which is joined to that domain and has a disk shared as a network share (\\share\Office). That network share is used as the ftp's physical path on DC. We've tested the FTP from the IIS FTP configuration panel, by clicking on Basic Settings... then Test Settings.... When setting Administrator as a username with the Connect as... option, everything is fine: When no user is provided we can the below error: Q1: Could someone explain in more understandable terms what is written in the Details text area?

  Read the article

• Network Inventory Software

  The necessary condition of a company successful operation is a good state of computer assets. That is why all the company?s software and hardware should be inventoried on the regular basis. A system ... [Author: Dmitriy Stepanov - Computers and Internet - March 21, 2010]

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >