Search Results

Search found 30252 results on 1211 pages for 'network programming'.

Page 1089/1211 | < Previous Page | 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096  | Next Page >

  • Linux DHCPD Mac-Address based Groups

    - by GruffTech
    Our Current DHCPD.conf looks like the following. subnet 10.0.32.0 netmask 255.255.255.0 { range 10.0.32.100 10.0.32.254; option subnet-mask 255.255.255.0; option broadcast-address 10.0.32.255; option domain-name-servers 208.67.222.222,208.67.220.220; option routers 10.0.32.5; host Dev-ABaird-W { hardware ethernet 00:1D:09:3E:49:13; fixed-address 10.0.32.94; } ... more static hosts .... } About as basic as it gets. The old router is 10.0.32.1, our company wanted to implement a squid proxy to better monitor web traffic while at work, and if necessary block large time-wasters, IE Facebook.com. However, we've quickly realized that this change has played a mean prank on our Polycom SIP Phones. Occasionally our phones will not ring, the end recipient hears ringing (this is artificially created by our PBX) however the handset never rings. The ONLY thing that has changed in our network is the option routers line. So, Since all Polycom MAC addresses begin with 00:04:F2 would it be possible in DHCP to say any 00:04:F2:::* MAC addresses get option routers 10.0.32.1, and anything else must talk with our Gateway?

    Read the article

  • Long access time for static web page on virtual machine

    - by Karol
    My setup Windows 7 on workstation that I use at work (with domain) and home (no domain) Virtual machine (VMWare) that runs Arch Linux (I will call it just "Linux") with network interface in bridged mode. Linux serves web pages with Nginx. IP address of Linux machine is 192.168.0.16 and is added to C:\windows\system32\drivers\etc\hosts: 192.168.0.16 bridged bri IP address of Windows workstation is added to /etc/hosts: 192.168.0.10 workstation I can add more details to my setup description (I am not sure what is relevant). The question Often (but not always) it takes long time for a web browser (Firefox) to open static web page served by Linux. I am sure it is not a performance issue. To be more specific: it takes about ~20 seconds to resolve(?) the address http://bridged for a web browser. Additionally I have just installed samba service and noticed similar problem, so it is not specific to browser & http. Initial access for samba shares also takes long time.

    Read the article

  • Error upgrading Ubuntu server from Intrepid to Jaunty

    - by Martin
    I'm trying to upgrade an old ubuntu server from 8.10 (Intrepid) to 9.04 (Jaunty). But it fails. root@server1:/# do-release-upgrade Checking for a new ubuntu release Failed Upgrade tool signature Failed Upgrade tool Done downloading extracting 'jaunty.tar.gz' Failed to extract Extracting the upgrade failed. There may be a problem with the network or with the server. Does anyone have an idea why I get this error and how to fix it? UPDATE: I think i might have tracked the problem down. My /etc/update-manager/meta-release looks like this: [METARELEASE] URI = http://changelogs.ubuntu.com/meta-release URI_LTS = http://changelogs.ubuntu.com/meta-release-lts URI_UNSTABLE_POSTFIX = -development URI_PROPOSED_POSTFIX = -proposed If i go to http://changelogs.ubuntu.com/meta-release it has this info for Jaunty: Dist: jaunty Name: Jaunty Jackalope Version: 9.04 Date: Thu, 23 Apr 2009 12:00:00 UTC Supported: 0 Description: This is the 9.04 release Release-File: http://archive.ubuntu.com/ubuntu/dists/jaunty/Release ReleaseNotes: http://changelogs.ubuntu.com/EOLReleaseAnnouncement UpgradeTool: http://archive.ubuntu.com/ubuntu/dists/jaunty-proposed/main/dist-upgrader-all/0.111.8/jaunty.tar.gz UpgradeToolSignature: http://archive.ubuntu.com/ubuntu/dists/jaunty-proposed/main/dist-upgrader-all/0.111.8/jaunty.tar.gz.gpg Those links starting with archive.ubuntu.com are broken since jaunty is EOL. I guess i could fix this by copying this file, replacing "archive" with "old-releases", host the modified file somewhere and change the url in the meta-release file. Is this a good solution or will it make me run into worse problems?

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • VPN issue: SSTP Service service started and then stopped

    - by Ampersand
    When I was trying to set up a VPN connect on my laptop running Windows 7 Ultimate, I got this error: Network Connections Cannot load the Remote Access Connection Manager service. Error 711: The operation could not finish because it could not start the Remote Access Connection Manager service in time. Please try the operation again. I traced through some service dependencies and discovered that Secure Socket Tunneling Protocol Service was set to Manual. However, when I try to manually start the service, I get: Services The Secure Socket Tunneling Protocol Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. Setting all the services involved to Automatic did not help. SSTP just showed Automatic and Stopped in the Services panel. I found a solution that involved booting in Safe Mode and deleting the contents of C:\Windows\System32\LogFiles\WMI\RtBackup. This solution worked, and I could set up a vpn connection, but only until I rebooted again. TL;DR I'm looking for a way to permanently enable Secure Socket Tunneling Protocol Service and other vpn-related services permanently so I don't have to reboot into safe mode and delete files every time I need to connect to a vpn.

    Read the article

  • "Server Unavailable" and removed permissions on .NET sites after Windows Update [closed]

    - by andrewcameron
    Our company has five almost identical Windows 2003 servers with the same host, and all but one performed an automatic Windows Update last night without issue. The one that had problems, of course, was the one which hosts the majority of our sites. What the update appeared to do was cause the NETWORK user to stop having access to the .NET Framework 2.0 files, as the event log was complaining about not being able to open System.Web. This resulted in every .NET site on the server returning "Server Unavailable" as the App Domains failed to be initialise. I ran aspnet_regiis which didn't appear to fix the problem, so I ran FileMon which revealed that nobody but the Administrators group had access to any files in any of the website folders! After resetting the permissions, things appear to be fine. I was wondering if anyone had an idea of what could have caused this to go wrong? As I say, the four other servers updated without a problem. Are there any known issues involved with any of the following updates? My major suspect at the moment is the 3.5 update as all of the sites on the server are running in 3.5. Windows Server 2003 Update Rollup for ActiveX Killbits for Windows Server 2003 (KB960715) Windows Server 2003 Security Update for Internet Explorer 7 for Windows Server 2003 (KB960714) Windows Server 2003 Microsoft .NET Framework 3.5 Family Update (KB959209) x86 Windows Server 2003 Security Update for Windows Server 2003 (KB958687) Thanks for any light you can shed on this.

    Read the article

  • NTDS Replication Warning (Event ID 2089)

    - by Chris_K
    I have a simple little network with 3 AD servers in 2 sites. Site A has Win2k3 SP2 and Win2k SP4 servers, site B has a single Win2k3 SP2 server. All have been in place for at least 3 years now. Just last week I started getting Event 2089 "not backed up" warnings (example below) on both of the win2k3 servers. I understand what the message means, no need to send me links to the technet article explaining it. I'll improve my backups. What I'm more curious about is why did I just start getting this message now? Why haven't I been getting it for the past 3 years?!? Perhaps this is related: I recently decommissioned a few other sites and AD controllers (there used to be 3 more sites, each with their own controller). Don't worry, I did proper DCpromo exercises and made sure we didn't lose anything. But would shutting those down possibly be related to why I get this error now? This won't keep me awake at night but I am curious as to what changed... Event Type: Warning Event Source: NTDS Replication Event Category: Backup Event ID: 2089 Date: 3/28/2010 Time: 9:25:27 AM User: NT AUTHORITY\ANONYMOUS LOGON Computer: RedactedName Description: This directory partition has not been backed up since at least the following number of days. Directory partition: DC=MyDomain,DC=com 'Backup latency interval' (days): 30 It is recommended that you take a backup as often as possible to recover from accidental loss of data. However if you haven't taken a backup since at least the 'backup latency interval' number of days, this message will be logged every day until a backup is taken. You can take a backup of any replica that holds this partition. By default the 'Backup latency interval' is set to half the 'Tombstone Lifetime Interval'. If you want to change the default 'Backup latency interval', you could do so by adding the following registry key. 'Backup latency interval' (days) registry key: System\CurrentControlSet\Services\NTDS\Parameters\Backup Latency Threshold (days) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • Migrateing to Windows Server 2008 R2 Domain Controllers - a few Questions/Issues

    - by Chris
    Ok so here's our setup: We have 2 Windows2k3 Domain Controllers. I am trying to replace them with Windows 2008 R2. The Win2k3 servers are DC01 and DC02. The Windows2k8 servers are DC1 and DC2. I prepared the Windows Server 2003 Forest Schema for a Domain Controller That Runs Windows Server 2008 or Windows Server 2008 R2. Then with both of the new servers up as member servers I dcpromo'd DC1 using the advanced option and added it successfully to my exisiting domain. Roles are GC, DNS and Active Directory Domain Services.I transferred The PDC, RID pool manager and Infrastructure master FSMO to the new DC.(DC1) The Schema master and Domain naming master are still on the old DC (DC01). The first issue I'm encountering is when i dcpromo the second DC (DC2) and select "Replicate data over the network from and existing domain controller" I select the new DC to replicate from (DC1) I get the following error: "Failed to identify the requested replica partner (dc1.xxx.org) as a valid domain controller with a machine account for (DC2$). This is likely due to either the machine account not being replicated to this domain controller because of replication latency or the domain controller not advertising the Active Directory Domain Services. Please consider retrying the operation with \dc01.xxx.org as the replica partner. "The server is unwilling to process the request." Is this because the Schema master and Domain naming master roles are still on the old DC (DC01)? And if so, if I transfer Schema master and Domain naming master roles to DC1 what is the risk or breaking my AD? I'm a little paranoid because this process HAS to be transparent. ANY down time or interruption will result in me getting a verbal ass kicking from my I.T. Director. Both of the new servers DNS point the the old DNS servers (DC01 and DC02) not themselves by the way. Thanks in Advance -Chris

    Read the article

  • In spite of correct DNS, Exchange sending to wrong destination server for single outbound domain

    - by beporter
    My company uses an SBS 2003 server and makes use of Exchange to host our own email. We also have a linux server hosting domains for some of our clients. In order for us to send to those clients, we had internal DNS set up to shadow the client domains to provide "correct" MX records inside our network. For example, public DNS for a domain abc.com might point to 1.2.3.4, but internally we have MX records set up to route mail for abc.com to 172.16.0.4, which is the linux email server. This setup was entirely functional; this is just back story. We've recently moved one of our client domains from our internal linux server to an external email provider. When we did that, we naturally deleted our internal shadow DNS records so our Exchange server would fetch correct (public) DNS records and route mail out to the new external host. This has NOT had any effect on Exchange though. Even after rebooting the Exchange server and completely flushing the DNS cache (nslookups on the Exchange machine itself correctly resolve to the new external address) Exchange still attempts to deliver messages for the domain to our internal server! Exchange correctly routes to all other internal and external domains when sending email. Somehow Exchange is trying to deliver to a machine that by all accounts it has no business trying to use for just this one domain. Is there a DNS cache that Exchange uses internally? Is there a way to flush that internal cache? What else could I be missing?

    Read the article

  • Cannot ping Google Public DNS on 8.8.8.8

    - by Tibor
    I have a weird problem on my Windows 7 (x64) computer. I seem to cannot ping the Google Public DNS on one of its addresses (while the other works fine). The peculiar thing is that it fails with the General failure. error message which usually means that there is a problem with a network adapter/base connectivity and not a timeout as one would expect. I checked my routing tables for any anomalies and I even flushed them but the problem seems unrelated. All the other hosts I tried ping fine (either respond or timeout). If I try to tracert or connect to the address via browser (yes, I know that it doesn't listen on port 80), it also fails instantaneously. The reason I need to ping 8.8.8.8 is that I commonly use it as a test of Internet conectivity due to it being rememberable. The problem occurs no matter where I connect to the Internet (it is a laptop computer). What could be the cause of this anomaly? Note: I use native IPv6 connectivity.

    Read the article

  • Durability of Websockets Server

    - by smitchell360
    I am starting to experiment with websockets. Does anyone know of a websockets server (open source or paid) that provides a durable store of the websocket "channel"? All of the examples that I have found do not address durability -- if a websockets server goes down, all "channel" data is lost. Services such as Pusher do not really discuss whether they address the durability issue (and I have not received a response from tech support yet). Happy to roll my own, but would rather not reinvent the wheel. EDIT: I'm not looking for websockets 101 information. That is readily available and understood. I'm looking for a server (open source or paid) that supports websockets and has a durable store for the websocket data so that, in the event that a server fails, a new server can take over where the original one left off. Two main purposes: 1. support failover scenarios contemplated by the websockets Network Working Group http://tools.ietf.org/html/draft-ibc-websocket-dns-srv-02#section-5.1 (most importantly so that missed messages are sent when a client connects to a failover server) 2. support scenarios where new subscribers must receive all past messages that were published. Of course this can be handled at the application layer...but that is not what I am looking for.

    Read the article

  • Shared printer hosted by Windows 7 to XP peers [closed]

    - by Alistair Knock
    Possible Duplicate: Add Network Printer drivers in Windows 7/Server 2008 R2? A Canon Pixma ip4600 installed all by itself when connected to a Windows 7-64 bit machine. I then updated it with the add-on Canon provide to give additional functionality. I then wish to share it with a box which is running Windows XP 32-bit. The XP box can see the printer but can't find a driver from the 7 machine, which is fine. I ask the 7 machine to get the x86 drivers, but it can't. I install the 32-bit XP drivers on the XP machine, but unlike previous Canon drivers (which unzip to give an .inf file), they assume a local printer and partially give up. I find the .inf file in the Program files\CanonBJ\... directory. Neither the XP machine, nor the 7 machine when the CanonBJ directory is shared to it, is happy with the .inf file. I attempt to install the 32-bit drivers on the 64-bit 7 machine, which, understandably, fail. Where do we go from here? (I apologise for posting in the first-person, I'm not sure why this was)

    Read the article

  • How to deal with the extremely big *.ost files in a Terminal Server environment which is running out of space

    - by Wolfgang Kuehne
    Our Terminal Server is running out of hard disk space, and the major files which occupy most of the space are *.ost files of the Outook, which come form the users which use the Terminal Server all the time through remote desktop. The Outlook is installed on the Terminal Server and various users can use it. What would be a solution in this case. Is there a way to limit the size of the *.ost files? I read in forums that having the Outlook 2010 set up in Cached Exchange Mode isn't the best practice for an environment where the hdd space is a major constraint. First thing that came to my mind is using folder redirection, and place the ost files (together with the AppData forlder) in a network share, but this does not help, because the ost files are saved a part of the AppData folder which can not be redirected. Then I thought if it is possible to limit the size of the ost file? Or limit the time that it keeps emailed cached, say just emails from the last 6 months are sufficient. Another solutions that came to my mind, moving the ost files somewhere else, this required the old ost file to be removed, and creation of a new one. I am not quite sure if the new OST file will still have cached the emails which where available in the old ost, or will it start caching from where the other one left. What do you suggest?

    Read the article

  • "Password Server: Stopped" on Mac OS Lion Server. Stops with error -1 during startup

    - by V1ru8
    Since I've restored the Open Directory from an archive because my Server crashed and the DB was corrupt. The password server does not start anymore. The log looks like this: Feb 14 2012 21:41:20 156746us Mac OS X Password Service version 376.1 (pid = 2438) was started at: Tue Feb 14 21:41:20 2012. Feb 14 2012 21:41:20 156801us RunAppThread Created Feb 14 2012 21:41:20 156852us RunAppThread Started Feb 14 2012 21:41:20 156879us Initializing Server Globals ... Feb 14 2012 21:41:20 163094us Initializing Networking ... Feb 14 2012 21:41:20 163196us Initializing TCP ... Feb 14 2012 21:41:20 191790us SASL is using realm "SERVER.HOME.POST-NET.CH" Feb 14 2012 21:41:20 191847us Starting Central Thread ... Feb 14 2012 21:41:20 191860us Starting other server processes ... Feb 14 2012 21:41:20 191873us StartCentralThreads: 1 threads to stop Feb 14 2012 21:41:20 191905us Initializing TCP ... Feb 14 2012 21:41:20 191954us Starting TCP/IP Listener on ethernet interface, port 106 Feb 14 2012 21:41:20 192012us Starting TCP/IP Listener on ethernet interface, port 3659 Feb 14 2012 21:41:20 192048us Starting TCP/IP Listener on interface lo0, port 106 Feb 14 2012 21:41:20 192082us Starting TCP/IP Listener on interface lo0, port 3659 Feb 14 2012 21:41:20 192117us StartCentralThreads: Created 4 TCP/IP Connection Listeners Feb 14 2012 21:41:20 192132us Starting UNIX domain socket listener /var/run/passwordserver Feb 14 2012 21:41:20 193034us CRunAppThread::StartUp: caught error -1. Feb 14 2012 21:41:20 193056us ** ERROR: The Server received an error during startup. See error log for details. Feb 14 2012 21:41:20 193075us RunAppThread::StartUp() returned: 4294967295 Feb 14 2012 21:41:20 193107us Stopping server processes ... Feb 14 2012 21:41:20 193119us Stopping Network Processes ... Feb 14 2012 21:41:20 193131us Deinitializing networking ... Feb 14 2012 21:41:20 193149us Server Processes Stopped ... Feb 14 2012 21:41:20 193165us RunAppThread Stopped Feb 14 2012 21:41:20 193202us Aborting Password Service. See error log. The error log repeats the following: Feb 14 2012 21:41:50 409022us Server received error -1 during startup. Feb 14 2012 21:41:50 409141us Aborting Password Service. Anyone an idea what's wrong here and how I can fix this?

    Read the article

  • Oracle with Kerberos authentication and Windows 2003 Server as KDC

    - by Supaplex
    Hello everyone. I am running Oracle 10.2 on a Windows 2003 Server SP2 which is also the domain controller on the network. I wish to switch authentication method from NTS to Kerberos. I have spent a lot of time trying to configure Oracle with Kerberos authentication from the Oracle Advanced Security option from the Net Manager utility. I have disabled NTS so Kerberos is promoted as the preferred authentication method. But as soon as the configuration is saved from Net Manager and I restart the Oracle server service, Oracle will not start. I don't know what Oracle is complaining about, because I don't know where to look for the Oracle error log. My first question is: how can I figure out what's bugging Oracle? My second question: is there a good tutorial for setting up Oracle on a Windows 2003 with Kerberos Authentication, where the Windows 2003 Server is the KDC? Maybe there is a book I can get? I have read Oracles own guide, but it is mostly for Linux/Unix. Thanks a lot!

    Read the article

  • What privilege level is required on a Windows client workstation on an ActiveDomain to break file lo

    - by Mike Burton
    I'm not sure if I should be asking this here or on StackOverflow, but here goes: I'm part of a team maintaining a document management application, and I'm trying to figure out Windows file locking permissions. We use a utility somebody downloaded years ago called psunlock to remotely close all locks on a file. We recently discovered that this does not work across different domains on our VPN. A little bit of digging lead me to the samba manual's discussion of file locking. I still don't really "get it", though. Does anyone have any insight to share into how the process of locking and breaking locks on files works in a network context? My thinking is that privileges are required both on the file appliance and on the client workstations which hold locks. Is that accurate? Can anyone give a more specific version? Ideally I'm looking for something along the lines of A user must have privilege level X in order to break locks held from a client workstation. In practice I'd be happy with a hotlink to a good white paper on the subject.

    Read the article

  • Mac OS X - configuring ntpd server with on LAN with D-Link DIR-655

    - by Mark C
    Hey all, This question is pretty specific, but I hope someone will have seen this error elsewhere. I a configuring a machine running OS X 10.5.8 to be an NTP server for machines connected to a LAN that is not connected to the Internet. I am not too worried about knowing the "right" time on all the machines, but rather worried about making sure everyone has the same notion of time. I configured the NTP daemon on Mac by turning on the Set date and time automatically in System Preferences, using the server's clock, 127.127.1.0 as the reference clock. I figured I should see if the server can NTP query itself before proceeding to the clients. The weird part is when I run the ntpq -p command in a command-prompt when connected to my D-Link DIR-655 (firmware: 1.33), it hangs for about a minute or so each time before finally giving me some output. I thought the problem might have to do with Port Forwarding, so I configured the router to forward port 123 for the IP of the server, but that did not improve the situation. When I run the ntpq -p command on my school's network, on a Linksys WRT54G router, or with the wireless Airport card turned off - I have absolutely no problems - the command returns a response instantly. Is this normal? I can see why a query might take a minute or so, but I don't understand why one router does it faster than the other. I tried messing around with the ntp.conf file adding the burst, minpoll, and maxpoll options: server 127.127.1.0 burst minpoll 4 maxpoll 5 Figuring that perhaps I am polling too often and the configuration file is slowing me down, but even with this, the ntpq still hangs on the D-Link DIR-655, but does just fine on the other routers. Any thoughts on where the lag is coming from or if the lag is even a problem?

    Read the article

  • TCP: Address already in use exception - possible causes for client port? NO PORT EXHAUSTION

    - by TomTom
    Hello, stupid problem. I get those from a client connecting to a server. Sadly, the setup is complicated making debugging complex - and we run out of options. The environment: *Client/Server system, both running on the same machine. The client is actually a service doing some database manipulation at specific times. * The cnonection comes from C# going through OleDb to an EasySoft JDBC driver to a custom written JDBC server that then hosts logic in C++. Yeah, compelx - but the third party supplier decided to expose the extension mechanisms for their server through a JDBC interface. Not a lot can be done here ;) The Symptom: At (ir)regular intervals we get a "Address already in use: connect" told from the JDBC driver. They seem to come from one particular service we run. Now, I did read all the stuff about port exhaustion. This is why we have a little tool running now that counts ports and their states every minute. Last time this happened, we had an astonishing 370 ports in use, with the count rising to about 900 AFTER the error. We aleady patched the registry (it is a windows machine) to allow more than the 5000 client ports standard, but even then, we are far far from that limit to start with. Which is why I am asking here. Ayneone an ide what ELSE could cause this? It is a Windows 2003 Server machine, 64 bit. The only other thing I can see that may cause it (but this functionality is supposedly disabled) is Symantec Endpoint Protection that is installed on the server - and being capable of actinc as a firewall, it could possibly intercept network traffic. I dont want to open a can of worms by pointing to Symantec prematurely (if pointing to Symantec can ever be seen as such). So, anyone an idea what else may be the cause? Thanks

    Read the article

  • DNS issue for internal website routing internet connection from remote location

    - by Michael Paul
    I have an issue that I could use some help with. Our company has a main location and a remote location. Previously, the remote location was connected to the main location through an internet connection VPN tunnel. The connection was pitifully slow at 1.5Mbps, so we upgraded it with a 75Mbps direct link. That meant the remote location lost it's internet access, so we routed their access through the main office internet connection. Everything works perfect except for one thing. The website we host is not accessible from the remote location unless the IP address is used. If I do NSLOOKUP on our website address from a machine connected to the main location network, it resolves correctly to the inside IP address. However, if I do the same from a remote location machine, it resolves to the website's outside IP address. Our internal DNS server(s) have a pointer and CNAME records set up, and everything was working perfectly before the connection was upgraded. In addition, the remote location has a domain controller, DNS server and DHCP server to service these requests at the remote location and prevent these requests from getting routed back and forth over the link. So I think was it happening is that for some reason the DNS server at the remote location is not resolving our website name correctly and passing the requests on to the routers, which then push the request out to the internet DNS system. That resolves the name to our external IP. This is purely a DNS issue, everything else works just fine. I am just stumped on this one. Any ideas on how to fix this? Edit: I forgot to mention that at the remote side of the link is a Cisco ASA-5505 and at the main office there is a Cisco ASA-5510. The link is connected between these 2 devices and the routing is handled in the 5510. Thanks, Michael

    Read the article

  • Building a PC for Work and play? [closed]

    - by Derek Organ
    Ok, Its been a long time since I build my own PC so I'm looking to get back into it again and build a new one. First off budget is about €800 excluding the monitor and windows 7 licence and mouse. (just bought a new g500) I plan on using my computer for work, lots of applications open at once but none particularly excessive (photoshop being the most demanding, mostly coding tools) I also use it for some gaming, e.g. COD, Starcraft etc. One thing I do want to do eventually is get a really good monitor with hight resolution and maybe 27" so the graphics card needs to be able to make best use of that. So a few questions 1) Is the bottle neck in performance mostly still the harddrives? 2) Aren't most processors e.g. i5 etc even i3 so far a head of other bottlenecks it makes litte difference the higher you go. Isn't the Graphics card dealing with heavy graphics so what really slows because of a slow CPU? So from this my thinking is to get a SSD drive as my primary drive for OS etc and have loads of memory e.g. 6-8GB and a decent mid level graphics card? It doesn't seem at my level worth spending much on CPU and any other parts really. I basic parts off the top of my head Case, Motherboard CPU SSD Drive SATA Drive Power Supply Memory Cooling (fan?) Graphics Card Network Card Keyboard DVD drive Mouse Windows Monitor Am I missing anything? Any helpful tips or general education much appreciated. Thanks, Derek

    Read the article

  • Can't remove route from routing table

    - by anon
    (I am on Windows Server 2003.) I see a couple of unusual entries in my routing table that I would like to remove: Network Destination Netmask Gateway Interface Metric XXX.27.44.1 255.255.255.255 127.0.0.1 127.0.0.1 20 XXX.27.255.255 255.255.255.255 XXX.27.44.1 XXX.27.44.1 20 All the "XXX"'s are the same octet. I would strongly prefer NOT to clear the routing table, since this is a production server. Here is what I've tried: route delete XXX.27.44.1 The route specified was not found. route delete XXX.27.44.1 mask 255.255.255.255 127.0.0.1 metric 20 The route specified was not found. route delete XXX.27.255.255 The route specified was not found. route delete XXX.27.255.255 mask 255.255.255.255 XXX.27.44.1 metric 20 The route specified was not found. I also tried adding the routes in hopes that I could delete them: route add XXX.27.44.1 mask 255.255.255.255 127.0.0.1 metric 20 The route addition failed: The parameter is incorrect. route add XXX.27.255.255 mask 255.255.255.255 XXX.27.44.1 metric 20 The route addition failed: The parameter is incorrect. Bonus question: What do these entries do, and how did they get there?

    Read the article

  • Lenovo S110 netbook screen resolution Ubuntu

    - by Neigyl R. Noval
    I am still stuck with 800x600 resolution. Here is the output of lspci: 00:00.0 Host bridge: Intel Corporation Device 0bf2 (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Device 0be2 (rev 09) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8176 (rev 01) Also, I tried modifying /usr/lib/X11/xorg.conf.d/10-monitor.conf to fix this problem, but still does not work: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Screen0" Monitor "Monitor0" Device "Card0" SubSection "Display" Viewport 0 0 Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" EndSubSection EndSection Section "Device" Identifier "Card0" Driver "vesa" VendorName "Intel Corporation Device" EndSection I'm using Gnome. System Preference Monitor screen resolution sticks to 800x600. What am I going to do?

    Read the article

  • Microsoft Windows DHCP: Steering IPv4 clients into specific scopes based on MAC

    - by Easter Sunshine
    We have visitors on our campus who bring their own laptops and devices and use our wireless and wired networks. When we receive a copyright infringement notice (typically BitTorrenting), we are required to quarantine that MAC address so that it no longer has Internet access. No matter what website it tries to visit, it is sent to a web page explaining to the user that the device has been quarantined. We have thus far implemented this in ISC DHCP on Linux. We have multiple VLANs with one or more public-IP subnets and one RFC1918 quarantine subnet each. All clients are leased IPs in the public-IP subnet(s) unless you're in a list of known bad MACs. Then, you are sent to the quarantine subnet so that your traffic is unroutable on the Internet (you are isolated by subnet only, not by VLAN). We would like to move to Windows DHCP in light of the IPAM role but I cannot figure out how to replicate this in Windows DHCP 2012 (Assign DHCP IPs for specific MAC prefixes on Windows Server 2008 R2 suggests it was not possible in 2008 R2), even while using policies. So here's what I'd like: The administrator/help desk provides and maintains a list of MAC addresses that are to be quarantined. The DHCP server places those MACs into the quarantine subnet on the respective VLAN, no matter which VLAN the client is in. I don't think reservations would work: We currently have about 300 registered bad MACs and about 12 VLANs. I don't want to make 300 x 12 reservations nor have to add 12 reservations per new MAC address. Not to mention all of the quarantine subnets are /24s. We do not have NPS/NAC. You do not have to register your MAC address get network access. We use Cisco routers/switches. Thanks.

    Read the article

  • Active Directory Child Domain Replication Problems

    - by MikeR
    Hi, I've recently inherited an Active Directory (all DCs Windows 2003) which has been configured with several child domains that are used as test environments for out CRM software. Two of these child domains have been used for testing using dates in the future (2015), throwing them well outside of the Kerberos tolerance for time, and they're flooding my event logs with replication errors such as the following: Description: The attempt to establish a replication link for the following writable directory partition failed. Directory partition: CN=Schema,CN=Configuration,DC=ad,DC=xxxxxxx,DC=com Source domain controller: CN=NTDS Settings,CN=TESTDC001,CN=Servers,CN=SiteName,CN=Sites,CN=Configuration,DC=ad,DC=xxxxxxx,DC=com Source domain controller address: 38e95b2a-35af-4174-84ba-9ab039528cce._msdcs.ad.xxxxxxx.com Intersite transport (if any): This domain controller will be unable to replicate with the source domain controller until this problem is corrected. User Action Verify if the source domain controller is accessible or network connectivity is available. Additional Data Error value: 5 Access is denied. I'd also like to upgrade to Windows 2008 at some point, but wouldn't want to attempt any schema updates while I'm not 100% confident on the replication. I'm guessing my only real solution will be to get rid of these child domains. The child domains are operating as stand alone domains, the DC is up and running and authenticating test users fine. I'm guessing the best solution to this would be to delete the domains (although I'd be happily told otherwise). The clock forwarding appears to have been happening for several years, so I'm assuming I can't just put the clock right (I'm guessing scope for this would be 180days, the same as the tombstone lifetime) With the replication errors would I be able to dcpromo the child domains DC, select it as the last domain controller in the domain and the child domain would be deleted? Or would I be better off treating the domain as an orphaned domain and use Microsoft's instructions to clear up as such. Any advice would be much appreciated.

    Read the article

  • Microsoft , Hotmail , Live , MSN, Outlook , unable to send emails and no support received from microsoft in 3 months we are trying asking for that

    - by bombastic
    Ok this is somenthing unbelievable, we have a website, users sign up and receives links to confirm they signed up BUT: 1 - microsoft blocked our IP (no one with microsoft email account can receive our emails) 2 - we tryed contacting microsoft submitting the detailed form about our problem 3 - we posted 3 times in their community about our problem 4 - we tweeted they about our problem 5 - we tryed finding out some telephone support number (the few there are arent' helping at all) Do you think we solved? the answer is NO :/ We still unable to send emails from our IP to microsoft email accounts, since 3 months back. Our emails are perfect we checked all the email headers following microsoft guidelines but it seems not enought, checking our IP reputation it seems everythings ok, indeed we can send email easly to any other provider , gmail, yahoo, etc Do you know any other way to try to get help ? FULL STACK ERROR FROM MICROSOFT: host mx1.hotmail.com[65.55.37.120] said: 550 SC-001 (COL0-MC4-F28) Unfortunately, messages from 94.23.***** weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. (in reply to MAIL FROM command) We are running a Virtual Private Server , so no HOSTING SITE, using NGINX too

    Read the article

< Previous Page | 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096  | Next Page >