Search Results

Search found 9715 results on 389 pages for 'bad passwords'.

Page 109/389 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• New to building computers worried about temps

  - by dave

  I'm new to building my own computers and I was wondering about maximum temperatures. I understand that the room temp can affect the computers temp but how relevent is it? I understand that if my room temp is 20°C none of my computer parts could be lower than that. But if my room is 27°C instead of 20°C would this cause my computers parts to heat up more/faster? My new computer I built myself for gaming is i7 2600k 16gb ram ddr3 1600 hd6970 2 gb 240gb ssd ( bought a nas with 3 2tb drives in raid 5 for my home network ) 850w modular psu I also have my old hp computer i3 2120 8gb ram hd6770 1tb hdd I also have 3 laptops in my household, but I am not worried about their temps, they heat up my legs but they are never under stress. Due to size and money reasons I used an old case and it only has one of the sides left on it. Is this bad for the computer and will the extra dust cause problems? Or should I leave it this way or take the missus wrath and buy a case? If so is there any certain case I should get? I don't care about looks I just want card reader and usb slots and for it to run as cool or cooler than now, my case has 1 fan. Also what are the max temps for my new and old computer parts? Is 40°C under load ok for my CPU, what about 70°C for my GPU is that ok too, or should I worry? What are normal and safe temps for my components? I have looked around but there seem to be lots of different answers. I know that 100°C is bad but I want my parts to last as long as possible and this site always seems to give good replies without arguing or flaming.

  Read the article

• What can cause a kernel hang on redhat 4?

  - by Ivan Buttinoni

  I've to solve a nasty problem on a ten machine "cluster": randomly one of these machine hang during an hard computation, sometime still ping sometime not. The problem was described me at the phone, I've still no touch/see these machine, so I can't be more precise. It seem there's no (real) keyboard or monitor linked to them, so I haven't nothing about keyboard led or messages on monitor. Don't worry, what I really need is some suggestion where to search the problem, some suggestions on what can cause a kernel hang on a working machine. I also see this post, but seem same need on a different situation. My ideas since now: - HW problem (ram, cpu, fan etc.) - bad autofs configuration - bad nfs(?) configuration - presence of a trojan/hacker/etc - /dev/"swap" linked to /dev/zero - kernel out of memory(??) - kernel bugged In other words I try to imagine what kind of envent can occour that can crash the kernel insted of the application that generate the event. What hang have YOU experienced before? Write it to me! TIA

  Read the article

• How to log kernel panics without KVM

  - by Spacedust

  My server is crashing and I can't find an answer why. It all started after my datacenter upgrade RAM from 16 GB to 32 GB. I also found such logs in dmesg - they've started to show itself just before the first kernel panic: EXT4-fs error (device md2): ext4_ext_find_extent: bad header/extent in inode #97911179: invalid magic - magic 5f69, entries 28769, max 26988(0), depth 24939(0) EXT4-fs error (device md2): ext4_ext_remove_space: bad header/extent in inode #97911179: invalid magic - magic 5f69, entries 28769, max 26988(0), depth 24939(0) EXT4-fs error (device md2): ext4_mb_generate_buddy: EXT4-fs: group 20974: 8589 blocks in bitmap, 54896 in gd JBD: Spotted dirty metadata buffer (dev = md2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. EXT4-fs error (device md2): ext4_ext_split: inode #97911179: (comm pdflush) eh_entries 28769 != eh_max 26988! EXT4-fs (md2): delayed block allocation failed for inode 97911179 at logical offset 1039 with max blocks 1 with error -5 This should not happen!! Data will be lost EXT4-fs error (device md2): ext4_mb_generate_buddy: EXT4-fs: group 21731: 5 blocks in bitmap, 60762 in gd JBD: Spotted dirty metadata buffer (dev = md2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. My system is CentOS 5.8 64-bit with latest kernel 2.6.18-308.20.1.el5. How can I check what is the reason of kernel panic without having an access to the KVM ? I have told my datacenter admins to check the memory in the server.

  Read the article

• Flash drive suddenly died. Why? Can I recover it?

  - by mg

  Hi, I have a flash drive that I used not too much but, after few month of inactivity, it died. I know that flash drives have a limited write cycles but I am sure that this is not the problem. I tried to create a new partition table and format the drive nothing worked. This is the output of mkfs.ext2. marco@pinguina:~$ sudo LANG=en.UTF-8 mkfs.ext2 -v -c /dev/sdc1 [sudo] password for marco: mke2fs 1.41.11 (14-Mar-2010) fs_types for mke2fs.conf resolution: 'ext2', 'default' Calling BLKDISCARD from 0 to 4001431552 failed. Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 244320 inodes, 976912 blocks 48845 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=1002438656 30 block groups 32768 blocks per group, 32768 fragments per group 8144 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Running command: badblocks -b 4096 -X -s /dev/sdc1 976911 badblocks: Input/output error during ext2fs_sync_device Checking for bad blocks (read-only test): done Block 0 in primary superblock/group descriptor area bad. Blocks 0 through 2 must be good in order to build a filesystem. Aborting.... Is there something I can do to recover it?

  Read the article

• Building vs buying a server for an academic lab [closed]

  - by Roy

  I'm looking for advice on the classic build vs buy question. We need a new linux server to run Matlab computation on in our lab (academic). Matlab parallel computing toolbox licence allows up to 12 local workers so we are aiming at a 12 core server with 4GB memory per core (total of 48gb). The system will have an SSD for the OS and a raid-5 (4x2tb) for data. I looked around and found a (relatively) cheap vendor, Silicon Mechanics, that offers a system to our liking (specs below) for $6732. However, buying the components from newegg cost only $4464! The difference is $2268 which is 50% of the base cost. If buying from a company can be thought of as a sort of insurance, basically my premiums are of 50% of the base cost which to me sounds like a lot. Of course any downtime is bad, but the work is not "mission critical", i.e. if it takes a few days to fix it when it breaks its no the end of the world. If it takes weeks to months then its a problem. If it breaks 2-3 times in 3 years, not too bad. If it breaks every month not good. In term of build experience, I set up a linux cluster in grad school (from existing computers) and I build my home pcs but I never built a server before. The server components I'm thinking about: 1 x SUPERMICRO SYS-7046T-6F 4U Tower Server Barebone Dual LGA 1366 Intel 5520 DDR3 1333/1066/800 ($1,050) 12 x Kingston 4GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) ECC Unbuffered Server Memory ($420) 2 x Intel Xeon E5645 Westmere-EP 2.4GHz LGA 1366 80W Six-Core ($1,116) 4 x Seagate Constellation ES 2TB 7200 RPM SATA 6.0Gb/s 3.5" ($1,040) 1 x SAMSUNG Internal DVD Writer Black SATA ($20) 1 x Intel 520 Series 2.5" 180GB SATA III MLC SSD $300 1 x LSI LSI00281 PCI-Express 2.0 x8 MD2 Low profile SATA / SAS MegaRAID SAS 9260CV-4i Controller Card, $695

  Read the article

• Sharing music on NAS with other zunes and ipods

  - by osij2is

  After being a long time iPod owner, I'm switching to the new Zune with its subscription model. I haven't bought a Zune yet but I'm planning on doing so within the next month or so. I have approximately 40gb worth of music and my girlfriend has her iPod music library around 30gb. I've been trying to figure out how to migrate all our music off of our laptops/desktops and centralize everything on my NAS. In sharing iPod music isn't too bad. Sharing from one machine to all is fairly easy within the iTunes player. As far as storing all the music on a NAS, again, iPods aren't too bad and imagine other systems aren't difficult. But I'm really new to the Zune and I'm beginning to run into some issues. My questions are: Is it possible to store all music from our iPods and Zune subscriptions and share music between the iPod/Zune within the same file share on my NAS? I'm sure it's possible to store music on a share, but I'm not sure how iTunes and the Zune software differs. Is there 3rd party software, maybe something like DoubleTwist that can sync based from NAS to multiple desktop/laptops? I've never used DoubleTwist but it's something that I found that looks close to being what I need. I've never quite done this myself so I'm trying to find a solution that can: a) store music on a network share; b) sync between different devices (zune/ipod) seamlessly.

  Read the article

• How browsers handle multiple IPs

  - by Sandman4

  Can someone direct me to information on exact browsers behavior when browser gets multiple A records for a given hostname (say ip1 and ip2), and one of them is not accessible. I interested in EXACT details, like (but not limited to): Will browser get 2 IPs from OS, or it will get only one ? Which ip will browser try first (random or always the first one) ? Now, let's say browser started with the failed ip1 For how long will browser try ip1 ? If user hits "stop" while it waits for ip1, and then clicks refresh which IP will browser try ? What will happen when it times-out - will it start trying ip2 or give error ? (And if error, which ip will browser try when user clicks refresh). When user clicks refresh, will any browser attempt new DNS lookup ? Now let's assume browser tried working ip2 first. For the next page request, will browser still use ip2, or it may randomly switch ips ? For how long browsers keep IPs in their cache ? When browsers sends a new DNS request, and get SAME ips, will it CONTINUE to use the same known-to-be-working IP, or the process starts from scratch and it may try any of the two ? Of course it all may be browser dependent, and may also vary between versions and platforms, I'd be happy to have maximum of details. The purpose of this - I'm trying to understand what exactly users will experience when round-robin DNS based used and one of the hosts fails. Please, I'm NOT asking about how bad DNS load balancing is, and please refrain from answering "don't do it", "it's a bad idea", "you need heartbeat/proxy/BGP/whatever" and so on.

  Read the article

• Grub error 18, gparted not showing anything

  - by Montecristo

  Some week ago I started having some problems with my pc, sometimes it just freezed not allowing me to do anything. I had to turn it off and on and sometimes do it a couple of time even at startup. Now it does not start at all, grub is giving me error 18. I have found that a solution is to create a bootable partition in the first sector of the disk. gparted does not recognize any partition, the window in which there would be my partitions is empty. sudo fdisk -l does not output anything. If I type sudo mount /dev/sda and then tab tab to autocomplete these are the devices coming out: sda sda1 sda2 sda5. If I launch sudo mount -t ext3 /dev/sda1 disk I get the following error: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so dmesg outputs [ 1831.974847] EXT3-fs: unable to read superblock Do you know how to solve this issue? I'm not completely sure this is a software problem, should I try with a new hard disk?

  Read the article

• How to convert JPEG JFIF files to JPEG Exif format?

  - by tigrou

  I recently put the SD card of my camera in a Windows 7 PC and start browsing pictures on it. I noticed some were not aligned correctly and use rotate feature included in Windows Photo Viewer in order to view them as I wanted. What I didn't know is that when rotate feature is used, it also overwrite the picture when pressing next or previous button resulting in a possible loss of quality (which is in my opinion a bad idea, app should at least warn user of what will happened when using such a feature). After that, I re-inserted the SD card back in my camera and bad surprise happened : the rotated picture could not be previewed anymore. Instead, i got a black screen saying "Incompatible JPEG format". Other files (untouched) are still working ok. To try to understand what happened I opened a JPEG file from camera and one generated on windows 7 in a hex editor. Here is the difference : The camera JPEG files have a Exif tag in them (with 0xE1 in header). Other JPEG files (Windows 7) have first a JFIF tag in it, followed by a Exif tag (with 0xE0 in header). So if i understand it well, both are JPEG files, but using a different internal format. Here is my question : is it possible (using some tool) to convert JFIF files to Exif format ? I understand that original camera files have been reencoded and thus lose some quality (getting originals back is impossible). What i want know if convert them from JFIF back to Exif (without a second loss of quality if possible...)

  Read the article

• Why not block ICMP?

  - by Agvorth

  I think I almost have my iptables setup complete on my CentOS 5.3 system. Here is my script... # Establish a clean slate iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -F # Flush all rules iptables -X # Delete all chains # Disable routing. Drop packets if they reach the end of the chain. iptables -P FORWARD DROP # Drop all packets with a bad state iptables -A INPUT -m state --state INVALID -j DROP # Accept any packets that have something to do with ones we've sent on outbound iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # Accept any packets coming or going on localhost (this can be very important) iptables -A INPUT -i lo -j ACCEPT # Accept ICMP iptables -A INPUT -p icmp -j ACCEPT # Allow ssh iptables -A INPUT -p tcp --dport 22 -j ACCEPT # Allow httpd iptables -A INPUT -p tcp --dport 80 -j ACCEPT # Allow SSL iptables -A INPUT -p tcp --dport 443 -j ACCEPT # Block all other traffic iptables -A INPUT -j DROP For context, this machine is a Virtual Private Server Web app host. In a previous question, Lee B said that I should "lock down ICMP a bit more." Why not just block it altogether? What would happen if I did that (what bad thing would happen)? If I need to not block ICMP, how could I go about locking it down more?

  Read the article

• Sharing music on NAS with Zune and iPod?

  - by osij2is

  After being a long time iPod owner, I'm switching to the new Zune with its subscription model. I haven't bought a Zune yet but I'm planning on doing so within the next month or so. I have approximately 40GB worth of music and my girlfriend has her iPod music library around 30GB. I've been trying to figure out how to migrate all our music off of our laptops/desktops and centralize everything on my NAS. In sharing iPod music isn't too bad. Sharing from one machine to all is fairly easy within the iTunes player. As far as storing all the music on a NAS, again, iPods aren't too bad and imagine other systems aren't difficult. But I'm really new to the Zune and I'm beginning to run into some issues. My questions are: Is it possible to store all music from our iPods and Zune subscriptions and share music between the iPod/Zune within the same file share on my NAS? I'm sure it's possible to store music on a share, but I'm not sure how iTunes and the Zune software differs. Is there 3rd party software, maybe something like DoubleTwist that can sync based from NAS to multiple desktop/laptops? I've never used DoubleTwist but it's something that I found that looks close to being what I need. I've never quite done this myself so I'm trying to find a solution that can: a) store music on a network share; b) sync between different devices (Zune/iPod) seamlessly.

  Read the article

• IDE compatability with SATA image

  - by Ormis

  We had an old CNC machine's hard-drive fail recently. The hard-drive is an old 1275MB IDE (Seagate) and there were defiantly bad sectors on it. I was able to image the contents of the drive onto a drive in my computer before it became completely unusable (I used DD, replacing all bad sectors w/ 0s). After running a couple chdsks, the SATA drive will boot off of the image. This is great, but there's one problem. The CNC machine old and requires IDE, I've attempted to copy the currently booting image off of the SATA drive and onto IDE drives numerous times in numerous ways and every time I do so the machines return that a boot device cannot be found. Some other information: The file system is fat32, running windows 98 The SATA drive is an 80gb drive I have tried copying the image to three 20gb and two 80gb IDE drives I have checked the jumper on the back of the IDE drives when using them If anyone has any ideas, questions, suggestions, etc. please let me know. P.S. I would just put a fresh install of win98 on the machine if i had the installation media (so that's out of the question). And if it comes to it, this is my last week working here, so I'll leave that to my co-worker. EDIT: Also, I have tried using Clonezilla as well as straight up DD to copy the image to the IDE drives.

  Read the article

• How to improve Samba performance on VirtualBox machine?

  - by ColinM

  I am running a Windows 7 64bit host and Ubuntu 9.04 32bit guest inside of VirtualBox 4.0.0 on a laptop which has internet connectivity via Wifi. The main use is writing code for which I use Netbeans. My dev environment is hte virtual machine and I use Samba on the VM to share the code directory so that I can use Netbeans on the host as my IDE. Unfortunately Netbeans does a lot of disk access and due to the poor Samba performance it makes the IDE hardly usable. How can I improve performance of the Samba share? On my desktop it isn't so bad but I don't know what the difference would be since they are similar setups (Win 7 hosts, cloned guests, SSDs, Vbox guests using SATA in AHCI mode, etc..). With Bridged networking is the performance between the host and guest limited by the physical hardware (Intel 6200 AGN on laptop)? I switched to Host-only and it didn't seem to improve performance at all. To clarify bad performance, I used 7zip to zip a project directory and got 19kbs to 500kbs depending on the size of the files being zipped. On my desktop it was in the ~10mbs range. Any tips for VirtualBox/Samba configuration to get improve the performance? I am using Samba 3.3.2. Hopefully Samba with SMB2 support will be released soon..

  Read the article

• How can I get Windows to apply its settings?

  - by Jouke van der Maas

  I have a computer with a major problem; it gives a blue screen when the login screen loads. I've been using this guide to troubleshoot the issue, and now I've run into a problem. I have determined the issue is not bad memory or a bad hard drive. According to the guide, this means the problem is in the OS. I've tried to follow the steps, but Windows (Vista SP1) somehow doesn't remember any changes. On every reboot, the computer is in exactly the same state it was in before. Any changes to system settings or files won't be recorded. As this means I can't check what is causing the problem, I can't fix my PC. Is there a way to find out what's causing this? Is it just a mode Windows goes into to protect itself, or is it some other problem? Anything to help troubleshoot will be of great help here. PS. I'm kind of new to this site. If I messed up, please tell me in the comments.

  Read the article

• Can't mount hard drive. Ubuntu 12.04

  - by Sam

  I am trying to recover some pictures on my 320 GB Hard Disk, so I put in a Live Ubuntu CD and am in that right now. In the devices list, it shows my USB drive, but not my 320 GB Hard Disk. I can see the disk in Disk Utility (it says it's on /dev/sda), but it's not mounted, and it says it has a few bad sectors but it is OK. In Disk Usage Analyzer, it says my maximum capacity is 13.4 GB, so it's definitely not using the 320 GB Hard Disk. I tried the following: sudo mkdir /media/newhd (worked) sudo mount /dev/sda /media/newhd (didn't work. it says I must specify the filesystem type) I then tried: fsck.ext4 -f /dev/sda (didn't work. Said: Superblock invalid, trying to backup blocks. then: Bad magic number in super-block while trying to open /dev/sda. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock) Does anyone have any ideas? The whole problem started when my Windows Vista said "Can't find operating system". Any ideas on how I can get on to my hard drive at /dev/sda?

  Read the article

• What may be wrong with String::ToIdentifier::EN tests?

  - by wk01

  I try to install Perl module String::ToIdentifier::EN (as depndency of DBIx::Class::Schema::Loader) but it fails on tests. I googled those errors but get no picture, where is problem: Building and testing String-ToIdentifier-EN-0.07 cp lib/String/ToIdentifier/EN.pm blib/lib/String/ToIdentifier/EN.pm cp lib/String/ToIdentifier/EN/Unicode.pm blib/lib/String/ToIdentifier/EN/Unicode.pm Manifying blib/man3/String::ToIdentifier::EN.3pm Manifying blib/man3/String::ToIdentifier::EN::Unicode.3pm PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00_basic.t t/10_ascii.t t/20_capitalization.t Byte order is not compatible at ../../lib/Storable.pm (autosplit into ../../lib/auto/Storable/_retrieve.al) line 380, at /home/wanradt/perl5/lib/perl5/Lingua/EN/Tagger.pm line 167 # Looks like you planned 25 tests but ran 4. # Looks like your test exited with 25 just after 4. t/00_basic.t ........... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 21/25 subtests Byte order is not compatible at ../../lib/Storable.pm (autosplit into ../../lib/auto/Storable/_retrieve.al) line 380, at /home/wanradt/perl5/lib/perl5/Lingua/EN/Tagger.pm line 167 # Looks like you planned 768 tests but ran 512. # Looks like your test exited with 25 just after 512. t/10_ascii.t ........... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 256/768 subtests t/20_capitalization.t .. ok Test Summary Report ------------------- t/00_basic.t (Wstat: 6400 Tests: 4 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 25 tests but ran 4. t/10_ascii.t (Wstat: 6400 Tests: 512 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 768 tests but ran 512. Files=3, Tests=528, 1 wallclock secs ( 0.07 usr 0.02 sys + 0.42 cusr 0.04 csys = 0.55 CPU) Result: FAIL Failed 2/3 test programs. 0/528 subtests failed. make: *** [test_dynamic] Error 255 -> FAIL Installing String::ToIdentifier::EN failed. See /home/wanradt/.cpanm/build.log for details. Byte order is not compatible at... seems a key, but to where?

  Read the article

• troubleshooting really slow login on a (linux) machine

  - by Peeter Joot

  Within the last couple of weeks, any attempt to login to a specific linux server has gotten really slow. Once I've logged in, things appear to run without significant delay, but some other login like activities (like starting a new screen session) are slow. The machine's been rebooted a couple of times recently and that hasn't helped. , and it doesn't appear to be $PATH search (where $PATH can sometimes include bad NFS mounts), which I've seen historically in our environment. I've also tried completely removing my .profile/.bash*/... type of init files to rule out anything bad there. I also see slow login for at least one other userid on the system. One thing I've noticed is the following message when trying to exit from a screen terminal: Utmp slot not found -> not removed and am wondering if this is related (having a vague recollection that Utmp has something to do with login). Any idea what that message means, or how to fix it, and if it would be related? Failing that, what sort of problem determination tools are available to investigate what is slowing down this login process?

  Read the article

• What are my options in replacing the noisy fan in my Linksys Cisco SRW2008P managed GigE switch?

  - by Fred Sobotka

  My first managed GigE switch, the Linksys SRW2008, was a dream, until it started randomly chattering on various ports. That started while I was on the road all the time, which made it take forever to diagnose, but that's a different problem. When I finally determined that the switch was bad, it was still covered by warranty by Linksys/Cisco, so I opened an RMA ticket and returned it. Unfortunately, Linksys/Cisco "upgraded" my replacement switch to a SRW2008P, which has Power over Ethernet features I never planned on using. That by itself wasn't so bad, but it's my guess that the inclusion of PoE functions in this model required a tiny, super-loud internal fan to keep everything cool. This wasn't something I wanted or asked for, but, now that I am stuck with it, I am investigating options for replacing that little internal fan with something far quieter. For example, if I attach a larger fan to the outsite of the chassis, I think it could push enough air to replace the stock fan that is currently there. Any advice on carrying this out? I have no interest in melting my switch due to insufficient ventilation.

  Read the article

• Apache not routing to tomcat on correct Virtual host

  - by ttheobald

  We are looking at moving from Websphere to Tomcat. I'm trying to send traffic to tomcat from apache web server based on the virtual host directives in apache web server. After some playing around I have it sort of working, but I'm noticing that if I have a JKMount directive in the first VirtualHost in apache, all virtualHosts will send to the application server. If I have the JKMount in Virtual hosts further down in the configs, then only that VirtualHost works with the request. For Example, with the configs below here are my symptoms mysite.com/Webapp1/ -- I resolve to the proper application mysite2.com/Webapp1/ -- I resolve to the proper application (bad!) mysite.com/MonitorApp/ -- I resolve to the proper application mysite2.com/MonitorApp/ -- I resolve to the proper application (bad!) mysite.com/Webapp2/ -- I DO NOT get to the app (good) mysite2.com/Webapp2/ -- I resolve to the proper application Here's what my web server virtualhosts look like. <VirtualHost 255.255.255.1:80> ServerName mysite.com ServerAlias aliasmysite.ca ##all our rewrite rules JkMount /Webapp1/* LoadBalanceWorker JKmount /MonitorApp/* LoadBalanceWorker </VirtualHost> <VirtualHost 255.255.255.2:80> ServerName mysite2.com ServerAlias aliasmysite2.ca ##all our rewrite rules JkMount /Webapp2/* LoadBalanceWorker </VirtualHost> we are running apache webserver 2.2.10 and tomcat 7.0.29 on Solaris10 I've posted an image of our architecture here. http://imgur.com/IFaA6Rh I HAVE not defined VirtualHosts on Tomcat. Based on what I've read, my understanding is that it's only needed if I'm accessing Tomcat directly. Any assistance is appreciated. Edit Here's my worker.properties. worker.list= LoadBalanceWorker,App1,App2 worker.intApp1.port=8009 worker.intApp1.host=10.15.8.8 worker.intApp1.type=ajp13 worker.intApp1.lbfactor=1 worker.intApp1.socket_timeout=30 worker.intApp1.socket_connect_timeout=5000 worker.intApp1.fail_on_status=302,500,503 worker.intApp1.recover_time=30 worker.intApp2.port=8009 worker.intApp2.host=10.15.8.9 worker.intApp2.type=ajp13 worker.intApp2.lbfactor=1 worker.intApp2.socket_timeout=30 worker.intApp2.socket_connect_timeout=5000 worker.intApp2.fail_on_status=302,500,503 worker.intApp2.recover_time=30 worker.LoadBalanceWorker.type=lb worker.LoadBalanceWorker.balanced_workers=intApp1,intApp2 worker.LoadBalanceWorker.sticky_session=1

  Read the article

• Hp Pavilion dv6000 wont boot right and freezes

  - by MalwareManiac

  I have an hp pavilion dv6000 that was having windows issues recently including randomly freezing. I eventually concluded that the hard drive was bad (And I was correct as the bad drive started making funny noises and quit working soon after). So I replaced it with a known good drive and put windows on it and it worked for a few hours. After a few restarts startup didn't even make it to the login screen. It just stays at a lighted black screen until I restarted. After another restart it made it to windows but then froze after a few minutes. A few more restarts yielded one of these two results. Like I mentioned earlier I have a know good drive in it and I also replaced the memory that was in it with a know good stick along with running memtest with no errors. So What does that leave? a corrupted windows installation? Motherboard? CPU? Any ideas?

  Read the article

• "Outlook must be online or connected to complete this action" windows XP, outlook 2007, connect to e

  - by bob franklin smith harriet

  Hey, I can't connect to an exchange server using windows XP and outlook 2007, using the "connect anywhere over HTTP" process, it has been working until recently and the user reports no recent changes to his environment. The error is "Outlook must be online or connected to complete this action" It will prompt me for the username and password which I can enter, then it will give the errorm however this only happens when I delete the account and enter all details for the excahnge server again. The client computer that is unable to connect using outlook can connect to the HTTPS mail service and login send/receive fine. Nobody else has reported issues. making a test environment with a clean install of XP and outlook 2007 gives the same error, but using windows 7 and outlook 2007 connects perfectly fine everytime. I also removed all passwords using control keymgr.dll which didnt help. Any assistance or ideas would be appreciated, at this point nothing I've tried from technet or google works <_<

  Read the article

• How to set a management IP on a Dell powerconnect 5524/5548 switch?

  - by John Little

  When you first power on a 5524, connected via the serial console, you are offered a setup wizard where you can enter the management IP/Net/Gateway and enter the admin password. HOWEVER, if you dont do this in 60 seconds, the wizard dissapears, and there seems to be no way to run it again - even if you reboot the box. No commands work in the CLI, it just gives you this prompt: If you type say enable, or login, it gives: >login Unknown parameter May be one from the following list: debug help So no commands seem to work. The CLI reference guide does not seem to have any way to run the wizard, or to set the management port or admin passwords. So by not responding in 60 secons after boot, the unit is bricked. Any ideas?

  Read the article

• Why do I get Access Denied when using WinRM?

  - by Kev

  Following on from this question: Why does my PowerShell script hang when called in PSEXEC via a batch (.cmd) file? I took the advice from Jim B and installed WinRM. To recap I have two servers: HMon01 - runs Windows 2003 Standard SP2 Web1928 - runs Windows 2008 Standard SP2 Both servers are standalone. I installed WinRM for Windows 2003 from here and configured WinRM as follows on both machines: Client NetworkDelayms = 5000 URLPrefix = wsman AllowUnencrypted = false Auth Basic = true Digest = true Kerberos = true Negotiate = true Certificate = true DefaultPorts HTTP = 80 HTTPS = 443 TrustedHosts = * The problem I have is that if I remotely execute commands using the remote machine's built in Administrator account then all is well. However I have an account on the remote machine named remoteexec which is a member of the Administrators group (we disable our Administrator accounts). If I use this account then I get Access Denied errors. I've done all the usual things such as checking passwords and the like. Why would this be?

  Read the article

• Cloudera Manager CDH5 - Installation Failure on Oozie Database

  - by Nerrve

  While doing the installation, i keep getting a failure on the step "Creating Oozie database" java.lang.Exception: DB schema exists at org.apache.oozie.tools.OozieDBCLI.validateDBSchema(OozieDBCLI.java:877) at org.apache.oozie.tools.OozieDBCLI.createDB(OozieDBCLI.java:184) at org.apache.oozie.tools.OozieDBCLI.run(OozieDBCLI.java:127) at org.apache.oozie.tools.OozieDBCLI.main(OozieDBCLI.java:78) How do i fix this? Where do i get the password/username/dbname for the PostgreSQL database to drop the existing schema? I tried cat /etc/cloudera-scm-server/db*.properties | grep pass and /var/lib/cloudera-scm-server-db/data/generated-password.txt but the passwords don't work!

  Read the article

• Windows Web Server 2008 R2 Server Core local password complexity

  - by Dennis Allen

  How can I disable the local user account password complexity settings on Windows 2008 R2 "Server Core"? I am trying to migrate our windows 2003 web server to windows 2008 R2. I am trying to see if I can use the "Server Core" install, and it has been a very internet search intensive experience. What I can't find out how to do is to find out how to disable password complexity for local user accounts. While our user account generator currently creates nice strong passwords, there was a time when this was not the case and unfortunately forcing the users to change their password is not an option at this time. Any help greatly appreciated. Dennis

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >