Search Results

Search found 12844 results on 514 pages for 'dual graphics card'.

Page 109/514 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

  • Assignment to LAN queues (qWAN1 & qWAN2) from dual-WAN in pfSense

    - by Kurian
    I need help creating floating rules in pfSense for the following: I have two upper limited download queues qWAN1 and qWAN2 on my LAN interface. Each has its own qACK1, qDefault1 etc. How do I assign all unclassified traffic from WAN1 to LAN->qWAN1->qDefault1 and from WAN2 to LAN->qWAN2->qDefault2. qLink is the one and only default queue on LAN so that I get wire speed to the pfSense host from the LAN.

    Read the article

  • nVidia driver is not installed for x64 Windows 7 (Vaio VGN-SZ460N)

    - by Sergey Osypchuk
    I just upgraded memory to 4GB for Sony Vaio VGN-SZ460N laptop and trying to install Windows 7 x64. All works fine with default drivers, except video - I am not able to set resolution more than 1024x768. Technical specification says that this model is using: Chipset : Intel® 945GM Processor : NVIDIA® GeForce® Go 7400 notebook graphics processing unit (GPU) and Intel® Graphics Media Accelerator 950 I was trying to use Intel 945GM driver, for Windows 7 Ultimate x64 and get error: This computer does not meet the mininum requirements for installing the software Also, I was trying to download nVidia GeForce Go 7400 x64 but it says that there is no compatible hardware. Actually, it has disclaimer that those drivers doesn't work for Sony vaio and recomendation to use OEM website. Sony website has only 32-bit version of driver which says that it cannot be installed and x64 should be used... Any ideas?

    Read the article

  • Windows system drive letter changed after repair install

    - by taffer
    yesterday I did a repair install, because Windows froze on welcome screen after resizing its partition on a dual boot system. corresponding question Everything worked fine so far, but now I am facing another challenge: The Windows drive letter changed from G: to C:, so that most programs, including drivers, firewall and virus scanner do not work anymore. I tried to reinstall the virus scanner, but the uninstaller said, that drive G: is not available. What to do now, to get all programs running again? Is it possible, to rename C: to G: or will that mess up my system?

    Read the article

  • How can I make my monitor run at it's native resolution under Kubuntu 9.10?

    - by Adam Matan
    Hi, I have installed Kubuntu 9.10 afresh on an HP desktop computer with a Samsung SyncMaster 2243 and Intel integrated graphics card. The screen resolution is fixed on 1280x1024 instead of the native 1680x1050, which makes my eyes bleed. $ lspci -k |grep "VGA" -A2 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) Kernel driver in use: i915 Kernel modules: i915 and my xorg.conf: /etc/X11$ cat xorg.conf Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection Any ideas how to make this driver work? I found no working solutions on Google searches. Thanks, Adam

    Read the article

  • sound clipping in windows 7 64bit

    - by Sonic Soul
    something is up with 64 bit version of windows 7. i have 2 (good pro-sumer) sound cards which i've used in other version of windows 7 w/out problems, but now it is causing severe clipping (noise, sound having little gaps surrounded by static).. the cards i am using is echo mia, and native instruments audio kontrol 1. the audio kontrol 1 is a external card, and would work ok for a few hours after rebooting, and than it would go back into clipping mode, to the point where you tube videos would not play from trying to process sound and it stopping for extended periods of time. echo mia is performing better, but there is still some clipping and distortion. the machine i use is newly built, with i7 920 64 bit cpu, 6 gigs of ram and an outdated nvidia video card (geforece 7950 gx2)

    Read the article

  • CentOS - dual boot from new partition

    - by Dima
    I need to install two copies of the CentOS 5.5 (bank A and bank B) on different partitions of the same hard disk and install grub boot loader to another partition (visible from both banks). The boot loader should redirect the boot menu to bank A or bank B (according to the configuration). The new partition is mounted to /common_partition and grub is installed on it using following command: grub-install /dev/hda In the new partition I'm created the following menu.lst file: title BOOTCONTROL REDIRECT : PLEASE WAIT root (hd0,1) configfile /boot/menu.lst boot On my setup: both partitions (bank A and bank B) are primary and grub is installed on MBR. The problem is: but the new boot loader (on common_partition) did not load. What wrong on my configuration?

    Read the article

  • Bridging a Windows 7 and Ubuntu dual boot inside an OS

    - by matsko
    I have Windows 7 and Ubuntu installed on my local PC. They're both installed on separate partitions on the same machine, and when the computer boots up the user is given the option to choose which one they want to boot use as the OS. This all works fine, but I want to use Windows 7 instead of Ubuntu, I am required to restart the computer and boot up the other OS. Is is possible to use an "inline" tool that will allow to change between both OSs as if they were windows in Windows 7? Which tool would that be? Does anyone know of anything else than Parallels? Also are there any free tools that would do this?. Many Thanks.

    Read the article

  • usb device in dual mode on gentoo linux

    - by Idlecool
    i am having a flip flop usb modem which has two modes 1 usb mass storage mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fff5 ONDA Communication S.p.A. 2 usbserial mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fffe ONDA Communication S.p.A. by default whenever i plug the modem to the usb port.. the linux machine recognize it as a usb mass storage device.. how can i make it load as usbserial device i have been using a package usb_modeswitch in the past on ubuntu 10.04 but i cannt install the same package on gentoo live cd.. even udev is not installed on live cd.. how to change the product-id of the usb device on gentoo live disc without udev.

    Read the article

  • Mavericks Dock Lag

    - by Syle
    Im having an weird bug on my MacBook Pro. When I start the machine, the dock have some graphic lag, the same when I open and close windows. The solution is simple, just open the AutoCAD and close it and the bug is gone. The same if I open AutoDesk Maya or other similar 3D program. My question where is not how to fix it, but why it happens. Its like Mavericks on the start thinks: Well you can only use a little memory of the graphic card! But if i open AutoCad, its like: Oh you are opening AutoCad so its better starting boosting the graphic card and giving you more memory. I bet there is something that is forcing Mavericks to think like this. Any help is welcome! =)

    Read the article

  • Timeout option not working on efi windows 7/windows8 dual boot machine

    - by Guenter
    I hav a gigbyte GA-Z77m-D3h mobo and installed Windows 8 Pro and Windows 7 Ultimate on two SSDs (in that order) in EFI mode. Now when I start my computer, I get the windows boot menu (text mode) with the two OSses to choose, but I have to manually press RETURN to have the computer boot into the Win OS. Even if I wait an hour, no default action takes place. Using bcdedit (from either of the OSses) I can successfully change the time out value, and it shows up in the bcdedit (no params) output. But it doesn't fire ... Here is my current BCDEdit output (headers are in German, but values should be readable): Windows-Start-Manager --------------------- Bezeichner {bootmgr} device partition=O: path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale de-DE inherit {globalsettings} integrityservices Enable default {default} resumeobject {5ad2802c-c60a-11e2-acdb-80331c501b11} displayorder {default} {current} {5ad2802a-c60a-11e2-acdb-80331c501b11} {5ad28028-c60a-11e2-acdb-80331c501b11} {5ad28029-c60a-11e2-acdb-80331c501b11} toolsdisplayorder {memdiag} timeout 5 displaybootmenu Yes Windows-Startladeprogramm ------------------------- Bezeichner {default} device partition=W: path \Windows\system32\winload.efi description Windows 7 locale de-DE inherit {bootloadersettings} recoverysequence {5ad2802e-c60a-11e2-acdb-80331c501b11} recoveryenabled Yes osdevice partition=W: systemroot \Windows resumeobject {5ad2802c-c60a-11e2-acdb-80331c501b11} nx OptIn Windows-Startladeprogramm ------------------------- Bezeichner {current} device partition=C: path \Windows\system32\winload.efi description Windows 8 locale de-DE inherit {bootloadersettings} recoverysequence {5ad28033-c60a-11e2-acdb-80331c501b11} integrityservices Enable recoveryenabled Yes isolatedcontext Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \Windows resumeobject {5ad28031-c60a-11e2-acdb-80331c501b11} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto (this output is from Win8; the Win7 looks nearly identical) If maybe the problem comes from a bad EFI Windows boot manager installation, can this be fixed without loosing my windows installations?

    Read the article

  • ubuntu12.04 hangs at checking battery state

    - by crystalbass17
    My 12.04 system hangs at "Checking battery state". At this stage, no commands work eg: ctrl+alt+f1, alt+f5. I ran recovery mode, I ran the command sudo mount -o remount, rw sudo dpkg-reconfigure gdm and gdm was the only one installed so I didn't get a GUI screen. I have an integrated graphics card "Intel Corporation Mobile 4 chipset Integrated Graphics Controller (rev 07)". So I cannot install nvidia drivers as everyone else suggests. I have gone through several similar questions but everyone suggests reconfiguring gdm or reinstalling graphic drivers. I did sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get upgrade to get the latest x-swat drivers. The system still hung at the same line. The other option is to reinstall ubuntu, which is out of the question, since we have a very specific install for our project where the settings are very hard to duplicate. Suggestions/Comments welcome.

    Read the article

  • Anti Aliasing dead

    - by Gazoza
    I have a problem with anti-aliasing. No matter the software settings, it seems to be gone. I tried driver updating and reinstalling, cleaning of the hardware, different monitor with different cablies, OS reinstalling and changing, none of which helped. I decided to change the graphic card, but that didn't work either. Moreover, I have a distinct impression that the jagged edges are worsening as time goes by. I think this is a hardware-related issue, but I don't know exactly what to do. If anyone here had similar troubles, and/or has an idea how to cope with them, I'd be very grateful. My current card is a nVidia GT610.

    Read the article

  • Output to TV only works if monitor is plugged in

    - by Greg Sansom
    I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

    Read the article

  • MPD to play music to single channel of my multi-channel card?

    - by hany tawfik
    I installed an Ubuntu 12-04 LTS server for a special background music application of mine, where I am using the server with an Asus Xonar DS sound card. The installation is successful, the MPD is working, the sound card is working with Alsa and its libraries installed accept for Alsa-oss. Alsamixer is working fine with left/right sides of each channel volume control through Q/Z letters shortcut when alsamixer is open in terminal . using the command " speaker-test -Dplug:surround71 -c8 -l1 -twav " I can hear every voice message coming out from the card at the right connector, so "front right/ front left" voice message are coming from first output in the card back, while the other outputs are silent..so on. The problem is that MPD is playing on all outputs simultaneously the same audio. I have been trying various configurations for the last 12 days with out any success, including trying to put mappings in the /etc/asound.conf Can any body help me achieve the above, or direct me to the right configuration of MPD or asound.conf

    Read the article

  • Operative systems on SD cards

    - by HisDudeness
    I was getting some wild ideas the last days, like putting some operative systems into SD cards rather than on my hard drive. I'll go further into details now and explain what lead me to consider this probably abominable decision. I am on a laptop (that means I have a native SD-card reader) which is currently running a cross-distro setup, with a bunch of Linux systems (placed in dedicated ext4 logical partitions into a huge extended one) regulated by an unique GRUB. Since today, my laptop haven't even seen any Windows system with binoculars. I was thinking about placing all the os part of my setup into a Secure Digital to save all my 500 Gb Hard Drive for documents, music, videos and so on, and being able to just remove the SD and boot my system into another computer too, as well as having the possibility of booting other systems into mine by just plugging in another SD, without having to keep it constantly placed in my PC. Also, in the remote case in the near future I just wanted to boot Windows 8 in it, I read it causes major boot incompatibility issues with other systems by needing a digital signature in order for them to start. By having it in a removable drive, I could just get rid of it when I'm needing him and switch its card with Linux one, and so not having any obstacles to their boot. Now, my questions are: I know unlikely traditional rotating disk drives, integrated circuits ones have a limited lifespan in terms of cluster rewriting. Is it an obstacle to that kind of usage? I mean, some Ultrabooks are using SSD now, is it the same issue, or there are some differences between Solid State Drives and Secure Digitals in that sense? Maybe having them to store system files which are in fixed positions (making the even-usage of cluster technology useless) constantly being re-read and updated and similar things just gets them soon unserviceable, do it? Second question: are all motherboards and BIOSes able to boot from SDs just like they are from USB pen drives (I mean, provided card reader is USB-connected, isn't it)? Or can't bootloaders like GRUB be installed on SDs working? If they can't, is it a solution installing GRUB to MBR and making boot option pointing to SD? Will it work? Are there any other problems to installing OSs on a Secure Digital?

    Read the article

  • how to take a backup of ubuntu system as it is?

    - by rajat
    I have installed ubuntu(dual boot) using wubi(Windows-based UBuntu Installer) installer for windows , and since then i am working in linux now it has many projects with many dependencies now i want to install the same ubuntu to other machines ,so that i don't need to install Ubuntu first and then install each and every project and it's dependencies . There is a folder called ubuntu in my windows driver which was created by wubi and which has all the ubuntu stuff . PS: Other machines have only windows 7 installed and have same configuration . Is there any way to install the save ubuntu i am using to the other machines ?

    Read the article

  • Ways to increase my Ubuntu partition space

    - by Andreas Grech
    I am currently running Ubuntu and Windows 7 as dual-boot on a single HD. The problem is that when I installed Ubuntu, I didn't allocate as much space as I thought I would need and now I need 'reinstall' Ubuntu so that I can increase the amount of storage space. Now there are two ways to go about this. Either I use use gparted to increase my partition space (but I read that it's not really that safe as regards data loss) or create the new partition with more space and reinstall Ubuntu there. But if want to reinstall Ubuntu, is there a way I can somehow "save" my current Ubuntu and install that one? What I mean is that I don't want to lose my current installed packages and files that I have on this partition. Is there a way to kind of maybe 'streamline' my current Ubuntu so that I install this one on the new partition? If not, what are your opinions as regards gparted?

    Read the article

  • Setting up dual wireless routers

    - by JasCav
    I have two wireless routers (one is the router supplied by Verizon - MI424-WR ActionTek and the other is DD-WRT Buffalo router). I want to set them up so that I have the second router (Buffalo) on its own subnet and two SSIDs so I can put different devices on different routers and so I can put my web server on the first router and put most of my other computers behind the second router for a little extra protection in case of a compromise. From my understanding, I have to hook the two routers together so that the LAN from the Verizon router plugs into the WAN port of the Buffalo router. This is where I get stuck. What settings do I need to look for to setup the Buffalo on its own subnet? Do I need to do anything with the Verizon router, or are the configuration changes done to the Buffalo?

    Read the article

  • how to set up dual wireless routers (G and N) with single broadband connection

    - by user15973
    A local cafe has an 802.11g wireless router attached to either an 8- or 12Mbs broadband connection. Although many customers still have -g devices, an increasing number are showing up with 802.11n devices (e.g. Mac laptops, iPads). The cafe owner is content with his router's area coverage, but he would like for his customers to be able to take advantage of the higher -n download speeds. He could simply replace the -g router with a -n router, but reportedly -n routers slow down considerably when servicing both -g and -n connections. Another option would be to buy the -n router, run an Ethernet cable between the two routers, and (of course) hook up the broadband connection to one of the two routers. Still another option would be to attach an ordinary, wired switch to the broadband connection and then attach both routers to the switch. Aside from the cost issue, what are the tradeoffs of those approaches? Which would you recommend, and why? Is there a better option than the ones I mentioned? Thank you in advance for your advice.

    Read the article

  • Can I ping via an arbitrary interface of a DD-WRT system?

    - by bytebuster
    There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

    Read the article

  • ATI Radeon HD 5970 Display numbering issues

    - by Arindam Sen
    I have 2 computers on which i have ATI Radeon HD 5970 graphics card installed. There is 1 VGA out and 1 DVI out in it. When I connect my VGA out to a monitor on my 1st computer, it shows it as display 1 and when I connect my DVI out to a monitor it show it as display 2 (I am using extended display). When I do the same thing on my 2nd computer it shows just the opposite. The VGA out shows as display 2 and the DVI out shows as display 1. Is it a problem with the drivers or the hardware? (because the graphics card on both is exactly the same)

    Read the article

  • Is it possible to add hardware on a remote machine and use it as if it was installed on the local machine?

    - by that0th3rGuy
    Probably a silly question. We have two computers in the apartment running Windows 7 and Windows Vista. 99% of the time we use headphones but every now and then we have a desire for some ambiance so we got a set of 2.1 speakers. But now only one of us has access to the speakers unless we move them around every now and then. So I was wondering if it's possible to add the other computer's sound card as a hardware device on my computer so that I can configure, for instance, Winamp to play through the other computer's sound card, hence the speakers connected to the other computer.

    Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >