Search Results

Search found 2609 results on 105 pages for 'htc hd 7'.

Page 11/105 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• Radeon HD 5770 - DisplayPort Problem

  - by Nick Schmit

  I am trying to set up 3 monitors with the Radeon HD 5770 I recieved a few days ago. I have read that I can use 2 DVI ports and an active DisplayPort adapter for a third DVI monitor. I have purchased this adapter: http://www.accellcables.com/products/DisplayPort/DP/dp_dvid.htm I have the two normal DVI monitors working, but when I try to extend the display to the third, I get a message saying the system has detected a problem with the connection through the display port which may limit resolution/refresh rate. I know that all the cables are fine, I have replaced the adapter, the monitors all work, I have tried different monitors through the adapter, and even nothing but the adapter, but I cannot get any monitor to work using it. I am trying to use 2 Dell monitors and an Acer. Have I overlooked something? Is there a compatibiliy issue I missed? Any suggestions as to what I could try? Thanks in advance.

  Read the article

• HD latency measurement using bonnie++ on different machines with different RAM size

  - by j0nes

  Hello, I have run bonnie++ v1.96 on two different servers without any additional load. One server is a "physical" Dell server with 32GB RAM, the other one is a virtual instance with 14GB RAM. I have read in the bonnie manuals that I should use two times the size of RAM in my bonnie runs, so I used 64GB on the physical machine and 28GB on the virtual machine. Now I want to compare the results, and I am wondering whether the results are comparable at all. The most interesting part is the latency part - on the physical machine, the values are about 10 times higher than on the virtual machine! Can I take these results seriously (e.g. the virtual machine HD is much much faster) or does the different RAM size tamper the results? Thanks! Jonas

  Read the article

• Full HD video playback acceleration with mplayer on Ubuntu Lucid

  - by pts

  I know that for an NVidia card I can sudo apt-get install nvidia-current mplayer, reboot, and then use mplayer -vo vdpau -vc ffmpeg12vdpau,ffwmv3vdpau,ffvc1vdpau,ffh264vdpau FILE.mkv to get accelerated video playback of H.264 and other codecs, so even full HD videos can be played back with only little CPU. (And there are many other options, e.g. XBMC also supports VDPAU.) But how do I get accelerated video playback if I have a recent ATI or Intel video card on Ubuntu Lucid? How do I figure out if my video card has acceleration built in? The solution has to work with mplayer or mplayer2. It's OK for me to recompile mplayer(2), but I'd prefer installing both the kernel and the X.org X server from a binary package repository.

  Read the article

• Hybrid drive not booting faster than a normal HD

  - by Nigel Trotter

  I have used Windows 7 to create an image of my existing standard 160GB HD and copied this image back to a bigger 500GB Seagate hybrid drive. After copying the image to the hybrid I had to resize the partition, which was fine but after rebooting a few times to "teach" the hybrid, I have no increase in boot speed. It still takes 20-25 seconds to close down and then over a minute to start up. Is this something to do with the way the image lays itself on the drive indiscriminately? Do I need to load the OS on the drive from scratch to get the benefits? My PC with an i5 processor, is using AHCI mode.

  Read the article

• 1080 HD video display - Windows 7

  - by blasteralfred

  I am running Windows 7 in my Dell Studio 1555 Laptop. I have ATI Mobility Radeon HD 4570 graphics card inside. When I try to watch a video, I can see only some disturbed texture. I can hear the audio and no prob with that. The I can see the video frames peeking sometimes but is pretty slower. I have DirectX (directx_feb2010_redist) and Win7 codecs installed. Here are some screenshots; The video details are; Name: video.mp4 Frame width: 1920 Frame height: 1080 Frame rate: 29 fps data Rate: 7958 kbps Total bitrate: 8052 kbps Just comment if you want more info.

  Read the article

• ATI Radeon HD 5970 Display numbering issues

  - by Arindam Sen

  I have 2 computers on which i have ATI Radeon HD 5970 graphics card installed. There is 1 VGA out and 1 DVI out in it. When I connect my VGA out to a monitor on my 1st computer, it shows it as display 1 and when I connect my DVI out to a monitor it show it as display 2 (I am using extended display). When I do the same thing on my 2nd computer it shows just the opposite. The VGA out shows as display 2 and the DVI out shows as display 1. Is it a problem with the drivers or the hardware? (because the graphics card on both is exactly the same)

  Read the article

• ATI Radeon HD 5770 Cooling

  - by Murtez

  I have a Radeon HD 5770 manufactured by ATI. In the course of using compressed air to clean it the fan shattered. I put a case fan on the card to cool it, but it's not doing a great job; the temperature goes to nearly 100 sometimes. The card is not overclocked or anything, the PC itself is clean. I looked around for a third party cooling system but the only one I found was the Accelero L2 Pro. It's low on stock and I don't know how great it will be, some review say it may not fit on all 5770 cards. Does anyone know of another one that will work? Help is much appreciated.

  Read the article

• Running a VM off of an external HD via USB

  - by Nelson LaQuet

  Is it viable to run (i.e. reference the vmx/vhd directly from the mounted drive) a VM (vmware running Windows Seven) off of an external HD via USB? I mean, I know it's possible, but I guess I'm asking if USB provides enough bandwidth for normal usage... If so, are there any particular brands that may be better or worse? I know that ESATA would be a more viable setup, but my laptop doesn't have an ESATA port. Currently I use the VM to segregate all of my work development servers and software from my main machine; so I will be running all development servers and tools on the VM directly.

  Read the article

• Another "Trouble copying music files from HD to 16GB thumb drive"

  - by Ron

  I have a brand new HP Quad Core - 6GB Ram - running 64-bit Windows 7. Running Norton Internet 2010. I try copying music files from HD to 16 GB thumbdrive and get blue screen after a few files have transfered over to thumbdrive. Computer blinks once and boom - blue screen and then reboots. This is really aggravating. I stopped anti-virus, pulled other USB attached devices - still does same thing. Any solutions out there?

  Read the article

• 2010 MBP HD speed sanity check?

  - by hvgotcodes

  I have a 2010 MBP with the 7200 rpm hard drive. I was copying a 2.1GB file, and noticed read/write speeds of around 20MB/s. Is that reasonable? Seems slow to me.... What is the proper way to benchmark a HD on OS X? Googling I see xbench, but that hasn't been updated in years. I also see some guides for using the command line. The goal would be to benchmark my drive and then compare the results to some official scores that the drive should be getting.

  Read the article

• Radeon hd 5700 monitor blank until connected HDMI device is started

  - by kaido loor

  Have win7, radeon hd 5700. When both PC monitor and HDMI device (Onkyo 607) are connected to Radeon card, the monitor diplays boot info, "starting windows, etc" but goes blank when "log into windows" should appear. Monitor comes back (w normal screen) if Onkyo and TV are turned on, not before. Multiple monitors is disabled. Really crazy. Any help appreciated. Generally, Onkyo can pick up HDMI signal ok, so at least smth works as intended.

  Read the article

• Macbook Pro - Disk Locked HD needs repair, can't reinstall OSX

  - by Rob

  I basically have the same problem. A friends HD was acting badly. Ran Disk Repair Util many times. Says disk needs repair but it won't repair it. I re formatted and installed 10.8 but that hasn't fixed it. Ive tried partitioning it and that won't work. Now I'm trying to get system 10.8 to reinstall and it says the disk is locked. Your fix requires Terminal, is that right? How do I open terminal to run your fix? Please help if you can. Disk Warrior couldn't fix it. I think the disk is bad. What do you think?

  Read the article

• 1080p HD TV + what is minimum spec pc required to stream HD movie files to it?

  - by rutherford

  I want to stream hi-def (non flash-based) movies from my future minimum spec pc to my network-ready HDTV. What I want to know is a) when streaming from a computer (local wifi network), is the computer's cpu/video/ram resources used to the same extent as it would be if playing back on the computers local screen? If not what are the differences? b) So with streaming hd content what is the minimum spec processor I should go for, if i) only one TV is acting as client ii) two TVs are simultaneous clients.

  Read the article

• Windows 7 formatting HD

  - by Rick

  I have an Acer Aspire 5610 that I am trying to put an Operating System back on. I am trying to install windows 7 32-bit and it will not go through the install. Not sure why. I am now trying to reformat the hard drive and start with a fresh formatted HD. No other partitions. The problem is that the install disk is not doing the format it is giving me an error. The error is 0x8007045d. I am at a loss. This is the first time running into this issue. Please Help.

  Read the article

• XDCAM HD 422 frame setting

  - by sebastian

  I have a question that you can hopefully answer me. I am trying to write a ffmpeg script that transcodes my clips in XDCAM HD 422 1080p24, and it works fine as long as the original file has 24 fps, but is there a way that I can set an option which says "even if the original file has 25 fps I will transcode it in 24 fps". I have tried it, like I said it works fine as long as the original clip has 24 frames, but as soon as the original clip has another framerate, he can not convert it to 24 frames. I have tried using -r 24 which normally settles the framerate, but here it doesn't work. I am using the -vtag xd5c

  Read the article

• Unable to read USB External HD after aborted back up

  - by Stjepan

  I have two PC laptops. On one of the two PC's (Win 7) I Aborted a back up and ejected the drive. Now that same pc wants to format the drive. I plugged the drive into the other pc (Win XP) and that one reads the drive and all data stored. Why does one want to format the drive and the other does not? .... My apologies for not being clearer with my original question and thanks for the responses, so; The drive is not a flash stick, its an external WD Hard drive plugged in via the USB. The two tips provided did not resolve the issue. Strangely, the pc with win XP can read the drive but the pc that the HD was plugged into when the backup was aborted still wants to format the drive. Stjep

  Read the article

• What's a worthwhile test for a new HD?

  - by Michael Kohne

  I work for a company that uses standard 2.5" SATA HD's in our product. We presently test them by running the Linux 'badblocks -w' command on them when we get them - but they are 160 gig drives, so that takes like 5 hours (we boot parted magic onto a PC to do the scan). We don't actually build that many systems at a time, so this doable, but seriously annoying. Is there any research or anecdotal evidence on what a good incoming test for a hard drive should be? I'm thinking that we should just wipe them with all zeros, write out our image, and do a full drive read back. That would end up being only about 1 hour 45 minutes total. Given that drives do block remapping on their own, would what I've proposed show up any infant mortality just as well as running badblocks?

  Read the article

• Asus x551c windows 7 Intel HD Graphics driver

  - by user3609459

  I did install Windows 7 64 bit on my ex. Windows 8 pro Asus x551c "Ultrabook". The CD with the drivers isn't useable since its a windows 8 only DVD-Rom. I got the Wi-Fi and other stuff running and already tryed 3 of the Intel-HD Graphic drivers for win7 64Bit i found with google. No one was compatible with my pc. Any suggestions how to get this running? I hate windows 8 and dont want to get forced to use it.

  Read the article

• Problems with word completion on Windows Mobile

  - by Rowland Shaw

  For "some reason" the word completion function on my windows mobile phone (HTC Diamond, rebadged as a T-Mobile MDA Compact IV (UK) running WM6.1 with HTC Touch Flo 3D) hasn't worked since one of my firends was taking a look at the phone (I remember him bitching about it being too obtrusive for him, as an iPhone fanboy). I've checked all the obvious settings ( Start Input Word Completion ) and everything looks set there; I tried a hard reset, to no avail and even tried upgrading the ROM t the latest from my network provider. I even tried walking into the store where I bought the phone, and the staff couldn't fix the issue. I still have my old handset, which also runs WM6.1 (a T-Mobile MDA Compact III (UK), albeit without Touch Flo 3D), and the word completion works on there, so I'm a little confused as to why I can't get it to work again on my new handset. Can anybody identify why this might not be working, or help me fix it? Edit: Even "Touch Input Settings" has both "Word Completion in T9 mode" and "Word Completion in ABC mode" checked. The full qwerty keyboard option is in T9 mode, and word completion works for this input method; It still does not work for my preferred, "Letter Recogniser" method.

  Read the article

• JQUERY, Compare two Text Blocks, and then animate only the new text

  - by nobosh

  I have two blocks of text Text Block 1 - Currently displayed on the page: "Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsa" But now Block 1 on the backend is: "Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsaadskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasdadskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsaadskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasdadskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsaadskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsaadskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsaadskadskl1lksad klasd klasd dsa Ahd Hd ahaSdjdajs dadjs jasd adskadskl1lksad klasd klasd dsa" I'd like to update the original Block 1 that's on the page, with the Block 2 that's on the server to the page. And I'd like to append, and not flash the entire block. So only the new stuff is flashed. Any ideas on how to do this in JQUERY?

  Read the article

• Radeon HD 2000, 3000, 4000 on 12.10 Quantal: fglrx (legacy) 12.6 unsupported, what to do?

  - by Andrew Mao

  After upgrading to 12.10 quantal, the packaged version of fglrx no longer works. I discovered that this is because there is a separate 'legacy' fglrx driver for the HD 2k-4k series cards, but it is incompatible with the xorg server on 12.10. This is the most current version of the driver for HD 2000 through HD 4000 series cards. You can't use the non-legacy fglrx driver, but you can use the open-source radeon driver if you prefer your WM compositing to be laggy and your YouTube videos to play like they would on a Pentium MMX series: http://support.amd.com/us/kbarticles/Pages/catalyst126legacyproducts.aspx Usually this driver can be installed in the following way, necessary because apt-get install fglrx would pull in the non-legacy driver: wget http://www2.ati.com/drivers/legacy/amd-driver-installer-12.6-legacy-x86.x86_64.zip unzip amd-driver-installer-* sudo sh ./amd-driver-installer-*.run --buildpkg Ubuntu/quantal sudo dpkg -i fglrx*.deb sudo aticonfig --initial -f If you use a different version of fglrx (for example, a newer 12.9 that doesn't support those cards) then the final command will give you an error no supported hardware detected or something similar. However, everything works at this point and you will get a reasonable xorg.conf: ... other stuff Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:5:0" EndSection ... other stuff At this point you're supposed to reboot and everything will be working with the fglrx driver. However, upon rebooting, you'll be treated to the following errors in Xorg.0.log when fglrx attempts to load: (EE) Failed to load /usr/lib/xorg/modules/drivers/fglrx_drv.so: /usr/lib/xorg/modules/drivers/fglrx_drv.so: undefined symbol: noXFree86DRIExtension Some searching around will show that this is a problem with the legacy ATI drivers not supporting xserver 1.13 or newer. (Arch Linux thread) ATI has released a fixed driver for its most recent (HD 5000 series or later) cards, but not for the 'legacy' cards yet. The non-legacy ATI drivers can't be used with the old cards. What should an Ubuntu user, using one of these HD 2000-4000 series cards, do? Wait for an updated 'legacy' ATI driver that properly works with xserver 1.13? Downgrade back to 12.04 Precise, which uses xserver 1.11? Try to downgrade xserver on 12.10 Quantal to 1.12, which could possibly break Unity and GNOME? Forced upgrade to HD 5000 series or later card? (Not possible with integrated graphics...) Some other 1337 action that fixes this problem painlessly?

  Read the article

• Are Intel HD 4000 graphics supported on Ubuntu 10.04 LTS?

  - by user1118764

  I have an intel Core i7-3700 system with Intel HD 4000 integrated graphics with a dual monitor setup (1 connected via VGA, the other via DVI) on Ubuntu 10.04 LTS 64bit. I'm trying to get my monitors correctly detected. Right now, in only 1 unknown monitor is detected with a max resolution of 1280x1024, which is lower than my main monitor connected to DVI. Also, the desktop is mirrored rather than extended. I've previously managed to get a Core i5-2400 system with Intel HD 3000 integrated graphics with the same dual monitor setup and Ubuntu 10.04 LTS 64bit to work using the glasen ppa drivers, but this time, after installing them following the instructions How do I install the Intel HD 3000 video driver? but it doesn't seem to work. Does the Intel HD 4000 require a different driver from the 3000? If so, where can I get it?

  Read the article

• Looking for updated BIOS for '99 Gateway in order to format/recognize >127 GB HD

  - by Jeff

  I have a '99 Gateway that's apparently too old for even Gateway to acknowledge it exists. Want to use it as a media hub and put in a 320GB HD, but it will not format above 127GB even running Win XP SP3. Read somewhere that upgrading the BIOS may do the trick, but I can't find the correct BIOS, and GW has been no help. Hoping I can just upgrade the BIOS, which is 11 years old. Any help would be much appreciated! I don't know where to look, and searches have been fruitless. System info: OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600 OS Manufacturer Microsoft Corporation System Name xxxx System Manufacturer Gateway System Model TABOR_II System Type X86-based PC Processor x86 Family 6 Model 7 Stepping 3 GenuineIntel ~596 Mhz BIOS Version/Date Intel Corp. 4W4SB0X0.15A.0015.P10, 9/28/1999 SMBIOS Version 2.1 BIOS info (from a free app I located): BIOS Type: Phoenix BIOS Date: September 28th 1999 BIOS ID: 4W4SB0X0.15A.0015.P10.9909281445-None BIOS OEM: 4W4SB0X0.15A.0015.P10 Chipset: Intel 440BX/ZX rev 3 SuperIO: SMC 70x or 80x rev 0 at port 0370 Manufacturer: Gateway Motherboard: WS440BX

  Read the article

• Ubuntu 13.10 on Acer V5-472 with HD 4000

  - by Hyperboreus

  I have an Acer V5-472 with intel HD4000 graphics chipset and a built-in 1366*768 display. I have installed ubuntu 13.10 amd64 in legacy boot mode with an external monitor. Installation showed no problems, I can boot from HDD and log into my system. The internal display doesn't work and I have to use an external monitor. I have tried the following (found in other threads) to no avail: Setting grub option "acpi_backlight=vendor" or "acpi_osi=Linux" or both. Installing the intel HD drivers for Linux from their homepage. Running in circles, screaming and shouting. The internal display lights up (I can change the brightness with Fn-Left and Fn-Right) but that's all. When I boot, I get a purple splash screen and from then only the external monitor works. I read somewhere that this might be a problem with kernel 3.11? Has anybody ubuntu running on an Acer V5-472? Should I change ubuntu version or use 32-bit instead? In general, how can I get the internal display to work? Edit: The settings-display dialogue shows the internal display correctly with supported resolution of 1366.

  Read the article

• Dual Monitor Setup with Ati Radeon Hd 5700 results in unusabledesktop win7

  - by NorthPole

  I have an ATI Radeon HD 5700 card which i've been using under fully updated windows 7 with its latest drivers. My monitor is a 2004 NEC LCD1703M which despite being pretty old runs fine. A friend gave me an IIYAMA ProLite E1900WS monitor (2009 or 20010 ). Both monitors are vga only. I've been using a DLDVI to VGA adapter to connect my old monitor and tested the same adapter to the new monitor and it worked fine. So I bought an HDMI to vga adapter with the purpose of having a dual monitor setup. But when both screens are connected to the card the following problem occurs: The monitor connected to the hdmi port cycles between sleep and a black screen while the other shows the operating system for about two seconds before getting black for another two seconds. I can "use" the computer (move the mouse,click,type e.t.c.) while this happens but its not something pleasant. I tried reinstalling the driver, booting with both screens connected (in which case the powerup messages and the bios are mirrored in both screens until I get to the login screen where everything falls apart) Funny thing is, everything works if I disconnect the ATI graphics card and use the onboard intel one. So, any suggestions as to what might be the problem and how I can fix it?

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >