Search Results

Search found 2609 results on 105 pages for 'htc hd 7'.

Page 13/105 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Ubuntu Determine HD RPM

  - by Webnet

  How do I determine the RPM speed of the hard drive on my server? I've tried hdparm -i /dev/sda and sginfo -g /dev/sdd, neither of which work.

  Read the article

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• Radeon hd 6570 black screen

  - by Sho

  I got some problem with new graphic card. Every time I use AMD Catalyst drivers on Windows or Linux, screen repeatedly goes black. This usually shows u when i open new cards in a browser, resize a window or run a program. Card runs smoothly on basic drivers but this means low resolution. 1940x1080 is native for my monitor so it causes a lot of problems. I've got a 600W Deus G1, so the power is not the problem. Maybe its a silly question, but would going form a vga cable to hdmi help to improve this situation? If not, can it be caused by slow processor or old mainboard? Im getting kinda confused about this whole thing...

  Read the article

• can I put files in hidden volume /home at the root level of macintosh HD

  - by mjr

  I am trying to reproduce the file structure of my VPS on my mac locally, so that it's easier for me to test websites in a local development environment to do this I would need have a /home folder at the root level of the hard drive using panic transmit I can see that there is already a volume called home at the root level can I store other files and folders in here to set up my local web server? sorry if this is a dumb question folks

  Read the article

• size of bad data on HD windows7

  - by acidzombie24

  While using my external harddrive (NTFS) i had a crc32 error. Now i would like to see how much data is corrupted. If its a few KBs i wont mind but if its a few MB i should consider getting a new harddrive. How can i check using windows7

  Read the article

• Multiple monitors on ATI Radeon HD 5450 1GB DDR2 (Brand: Sapphire)

  - by Robert

  From other posts here, I understand that it might be possible to use up to 3 monitors on this card. My understanding (from the other posts here as well) is that since I have a HDMI output, I do not have a 'DisplayPort', right ? Mine has indeed 3 ports: DVI, HDMI and VGA. Can I have dual-monitor using both the HDMI and DVI ports simulataneously (I am not looking for Eyefinity, but simply extended desktop). Currently I am using dual monitor with DVI and VGA but will replace my 17 inches next week with a new (larger) one that has both VGA and DVI, so I intend to use both monitors connected digitally. I intend to purchase a cable ''HDMI to DVI''(MM) to do so on the second monitor. Optimal resolution on the one I intend to keep (22 inches) : 1680 x 1050, primary monitor. New one (24 inches) has an optimal resolution of 1920 x 1080. Am I running for problems ? Thanks, Rob

  Read the article

• Best Configuration For Youtube HD 720p

  - by Eray Alakese

  Hello, I'm recording a screencast with CamStudio . My computer's screen resolution is 1280*800 , so video's resolution is 1280*800, too. I'm using Microsoft Video 1 codec when recording. I was record 9 minutes video and this video's size is 214 MB . I will upload this video to Youtube. I'm coding a web site at the video, because of this, video must be quality (720p) . I want to reduce file's size, before upload . I'm using Total Video Converter . But when i convert to FLV , video's size increase to 250MB :) I don't know, how can i configure this setting and which file type should i choose.

  Read the article

• Best Configuration For Youtube HD 720p

  - by Eray Alakese

  Hello, I'm recording a screencast with CamStudio (http://camstudio.org/) . My computer's screen resolution is 1280*800 , so video's resolution is 1280*800, too. I'm using Microsoft Video 1 codec when recording. I was record 9 minutes video and this video's size is 214 MB . I will upload this video to Youtube. I'm coding a web site at the video, because of this, video must be quality (720p) . I want to reduce file's size, before upload . I'm using Total Video Converter (http://www.effectmatrix.com/total-video-converter/) . But when i convert to FLV , video's size increase to 250MB :) I don't know, how can i configure this setting and which file type should i choose. (screenshot here : http://i.imgur.com/Se0EP.jpg )

  Read the article

• How to get external 2.5 inch HD enclosure get recognised

  - by fireBand

  I am completely out of ideas. I have 2.5inch HDD from my old laptop, I have tried with 2 different HDD enclosures but my desktop does not recognize it. Not even showing in the disk management or BIOS. The HDD works fine if I use in a 3.5 inch enclosure with external power. I have tried 3 different Y USB cables. I have also got a 7 port self powered 2A USB hub. I have updated my chipset drivers as well. The problem is with my desktop , the enclosures work fine with my new laptop. Anything else that I should try? Thanks in advance.

  Read the article

• CPU and HD degradation on sourced based Linux distribution

  - by danilo2

  I was wondering for a long time if source based Linux distributions, like Gentoo or Funtoo are "destroying" your system faster than binary ones (like Fedora or Debian). I'm talking about CPU and hard drive degradation. Of course, when you're updating your system, it has to compile everything from source, so it takes longer and your CPU is used at hard conditions (it is warmer and more loaded). Such systems compile hundreds of packages weekly, so does it really matter? Does such a system degrade faster than binary based ones?

  Read the article

• Bad HD video deinterlacing processing

  - by Guy Fawkes

  I have Ubuntu 12.04 32-bit with Unity. My system configuration is: CPU: Core 2 Quad Q6600 (2.4 GHz) RAM: 8192 Mb DDR2 Kingston Video: Palit GeForce GTX 260 216 SP, and my screen resolution is 1680x1050. I also have Window 7 Ulitimate installed, and I can see the same files in Media Player Classic without any horizontal lines. I've installed vdpau driver, NVIDIA drivers 304.51, and MPlayer 2 (within SMPlayer). I've disabled "Sync to VBlank" option in CCSM (because in other way, by default, MPlayer process use about 50-60 percents of my processor load), tried to swich between different deinterlace options in SMPlayer, used "-vc ffh264vdpau,ffmpeg12vdpau" (without quotes) parameters for MPlayer, switched to "Ubuntu 2D", but, finally, have no results. Any suggestions? How must I to set up MPlayer?

  Read the article

• Updating ATI HD 5970 Graphics card - version errors?

  - by user55406

  I'm having an issue...My system specs is: Intel i7 960 6GM Corair XMS RAM ATI HD5970 graphics card Intel dx58so motherboard Cooler Master HAF 922 case 1.5TB Seagate hard drive Windows Vista x86 (32-bit). Here is my issue: when I go to AMD/ATI website to update my graphics card - it doesn't. when I type DxDiag and then click on display it tell me my version is 8.17.0 and its on 10.10.0 for the latest version. How can I get 8.17.0 too 10.10.0? I figure it would have done that after I updated the driver for my graphics card. Thanks.

  Read the article

• Lots of artifacts while streaming HD content with VLC 0.9.9 on CentOS

  - by Zsub

  I'm trying to stream (multicast) a x264 encoded file using VLC. This in itself succeeds, but the stream has a huge lot of artifacts. This seems to suggest that the data cannot be transported fast enough. If I check network usage, though, it's only using about 15 mbit. I have a similar SD stream which functions perfectly. I think I could improve stream performance by not streaming the raw data, but I cannot seem to get this working. It seems that on keyframes all artifacts are removed for a short while (less than a second). This is the command I use: vlc -vv hdtest.mkv --sout '#duplicate{dst=rtp{dst=ff02::1%eth1,mux=ts,port=5678,sap,group="Testgroup",name="TeststreamHD"}}' --loop Which is all one long line.

  Read the article

• HD Radeon 6950 cannot run multiple monitors

  - by Bryan S.

  I'm having troubles getting multiple monitors to run on my graphics card. I plug one via the hdmi, and one into the DVI (I have tried both available DVI ports). with one DVI port it does not even register the monitor, with the second one I go into the Catalyst Control Center and it gives me the option to swap between the HDMI and the DVI port. I guess since this is the flex edition I could just go get 2 DSP to HDMI converters, plug 2 monitors in through the available DSP, and than the 3rd one into the HDMI, but do you have any idea why it will not let me run one HDMI and one DVI?

  Read the article

• Computer will not boot - disk read error - cannot boot from HD or DVD

  - by Grant Palin

  This is a 3 year-old system: HP a1640n. There have been no issues with it in the past. I added a video card 2 years ago, and more memory 1 year ago, both without issues. There haven't been any recent hardware changes. I did install Win7 in Oct., but there were no issues with that either. I used the computer fine two nights ago, and turned it off. Yesterday, I tried to turn it on, and got the error: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" So I restart, see the initial start screen (HP) and enter the BIOS. The hard drive and dvd drive appear to be listed, but the names are gibberish text. I tried putting a Windows disk in the dvd drive, and continued with the boot, but the disk did not get recognized. Even though the BIOS was set to check for optical media before the hard drive. Back to the error screen. If the computer would boot from a cd or dvd, I would just figure the hard drive needed replacing. But both being problematic worries me. Is this a matter of replacing both the hard drive and dvd drive, or might it be an indication of a bigger problem? Thanks for any advice.

  Read the article

• USB HD Freezes Windows Explorer

  - by nfplee

  I recently purchased a "Seagate STBX1000200 1TB Expansion 2.5 inch External Hard Drive". It has been working without problems until recently. When i plug the device into a USB port the device is recognised as it appears in the device manager but when i go to Windows Explorer and try to open it (or right click on it) it hangs/freezes windows explorer. Please note i am using Windows 7 Professional. I have already tried various things without success after searching for people with similar problems. I did read that it could be a problem with how the computer assigns a drive letter. But whrn i go to disk management (when running as an administrator) it hangs and displays the following message: Connecting to virtual disk service I'd appreciate it if anyone could offer some advice. Thanks

  Read the article

• XXClone as a tool for migrating Windows XP Home from PATA to SATA HD

  - by raw_noob

  Has anybody had any experience using XXClone as a tool for cloning an existing installation of Windows in order to move it from an old PATA drive to a new, larger SATA without having to reinstall everything? Did you have any problems? Or can you recommend an alternative (free) software tool that you know - preferably from repeated experience - is reliable? I'm looking to move Windows XP Home SP3 to a new disk: same file system, same partition size. Thanks for looking.

  Read the article

• BIOS recognizes HD, but Ubuntu doesn't recognize it as partition

  - by user23792

  Hello, I just stuck in a new 64 GB SSD (literally out of the box) into my Lenovo X61 laptop, replacing an old 5400 RPM 80 GB drive. When I boot the system, my motherboard successfully sees the SATA hard drive. Now I want to install Ubuntu on it. I stick it in the CD drive, bootup the system, and it gets to step 4 (choose partition), but sees no available partitions. Do I need to do something to the hard drive before installing Ubuntu? Many thanks.

  Read the article

• Acer Aspire One 725 - missing graphic card driver for Radeon HD 7290?

  - by Melon

  Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with AMD Radeon HD 7290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: OK. Another attempt. I have a fresh Ubuntu 12.10. All updates done. downloaded Catalyst 12.11 beta drivers and decided to create a package. After installing package, I have this error from /var/log/Xorg.0.log: [ 13.394] (**) fglrx(0): NoAccel = NO [ 13.394] (**) fglrx(0): AMD 2D Acceleration Architecture enabled [ 13.394] (--) fglrx(0): Chipset: "AMD Radeon HD 7290 Graphics" (Chipset = 0x980a) [ 13.394] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0740) [ 13.394] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD [ 13.394] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000 [ 13.394] (--) fglrx(0): MMIO registers at 0xf0200000 [ 13.394] (--) fglrx(0): I/O port at 0x00003000 [ 13.394] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 13.484] (II) fglrx(0): ATIF platform detected [ 13.564] (II) fglrx(0): AC Adapter is used [ 13.565] (EE) fglrx(0): V_BIOS address 0xd00 out of range [ 13.565] (EE) fglrx(0): Failed to obtain VBIOS from Kernel! [ 13.565] (EE) fglrx(0): VBIOS read from Kernel, Invalid signature! [ 13.565] (EE) fglrx(0): GetBIOSParameter failed [ 13.565] (EE) fglrx(0): PreInitAdapter failed [ 13.565] (EE) fglrx(0): PreInit failed [ 13.565] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === end

  Read the article

• How do I configure an Intel HD Graphics 4000?

  - by derabbink

  First off, please note that last night I already posted this question to a launchpad mailing list, so this could be considered a cross post. However, I think this is a better place to ask the same question The question: How can I configure my Ubuntu 12.04, with upgraded kernel (3.6), to use the Intel HD Graphics 4000 adapter? (Intel HD 4000 is the standard of 3rd gen Intel Core i7 (Ivy Bridge) graphics adapter) Some output: $ glxinfo name of display: :0 X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 $ cat /etc/X11/xorg.conf this is probably the farthest from what it should be Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Module" Load "glx" EndSection $ lspci I only listed the line I think are relevant. If you want more info in order to help me, please comment :) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 16:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 16:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks HDMI Audio [Radeon HD 6000 Series]

  Read the article

• win7: software raid for several hds which retains files on each HD?

  - by Fuxi

  hi, is there some kind of software/driver which enables to create one big volume out of several hard disks but retains file structure on each HD? (in case one hd crashes only data on that hd will be lost). win7 enables me to do that but in case one hd breaks all data will be lost. thx

  Read the article

• C# Microsoft LifeCam HD mjpeg capture

  - by IraqiGeek

  Hi, I have a Microsoft LifeCam HD-5000 webcams. According to AMCap, the camera outputs a MJPEG stream at 30fps at 720p. I want to capture each JPEG frame in a small application without doing any preview or decompression/transcoding to minimize CPU utilization to the minimum possible. I'm a C# developer, but I'm new to DirectShow. Is there a simple way to capture the MJPEG stream frame by frame as its output from the camera in C#/.NET without decompressing it?

  Read the article

• APK Assets not loaded on Kindle Fire HD

  - by Bastl

  I have developed an App for the Amazon Kindle Fire HD. While distributing I got a report from amazon that its not running on almost all Kindle devices and a blackscreen is displayed. They send me a logcat log file and I found out that it's not possible to load some assets directly from APK file (accessing via C++ and zlib). Everything is running fine if I start it via Eclipse. Any idea whats going wrong? Thanks!

  Read the article

• Frame rate upsampling codec/player/software?

  - by djechelon

  Hello, I recently noticed that when I play both HD and SD videos on my HDMI TV at 1080p 60Hz from my computer, the motion is not fluid as I would expect. As far as I know, it could be because the 24fps video needs to be upsampled by the codec to match the 60Hz output of the monitor. But, as far as I know, the upsampling is done by simply repeating each photogram for a certain amount of frames. I usually play MKV videos with VLC. Do you know if there is a player or codec that performs the upsampling by interpolation like some 100Hz TVs do? I recently saw an LG led TV play a 24fps 720p video at 100Hz with an incredible motion fluidity, and I simply wonder why can't my computer do! I have an NVidia card. Does PureVideo help? I'm a noob with these things. Thank you.

  Read the article

• Verizon HTC Eris - No sound on incoming phone call after 2.1 droid upgrade. Help!?

  - by Michael Rosario

  Has anyone had the following issue? I've had several issues as well: No sound when call connects, ringing or people talking. Apps would force close like weather. I did call HTC support and they had me go into Menu, Settings, Manage Applications and then clear the cache of the problem app. They also had me clear the cache once the browser was open and then do a soft reset (power off the phone and take the battery out for 15 seconds) This did fix some issues, but I am constantly turning my phone on and off to get sound back on call or to make the assigned ringtones work. There's no rhyme or reason as to why they stop working... Anyone else tried anything different??? Related problem statement... http://community.htc.com/na/htc-forums/android/f/32/p/2601/10344.aspx#10344 My wife and I are most concerned about the incoming call issue.

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >