Search Results

Search found 2609 results on 105 pages for 'htc hd 7'.

Page 12/105 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • Very poor SCSI hd performance on IBM x336 with LSI 1030 RAID1

    - by David Tschoepe
    I'm experiencing very poor performance on an IBM x336 server with dual 73GB 15k hard drives on a U320 controller, LSI 1030. We're getting maybe 3.5MB/sec max (per HD Tune utility). It should be over 100MB/sec at least, I would think (another x335 box is running 70-80MB/sec). The server was recently setup and didn't really notice the problem, but may have been there from the beginning, so not sure. I have installed the IBM ServerRAID Windows utility. The server is running Windows 2008 R2 Web edition (if that matters). I thought maybe one of the drives was bad, so far I have removed one of the drives out of the array and tested again, but still the same results. I'm waiting for the RAID1 to resync and I will try pulling the other drive next. I've also used the ServerRAID utility but haven't noticed anything in there that might indicate a problem. Not sure if I'm on the right path here. So looking for some advice to track this down.

    Read the article

  • Getting 2560x1600 out of an ATI Radeon HD 4670 on Windows 7

    - by Alexey
    Greetings, I've got a Dell Studio XPS 1640 laptop (with an ATI Radeon HD 4670 graphics card) running Windows 7, and just bought a Dell 3007HPC 30-inch monitor for it. I'm trying to figure out how to get the full 2560x1600 experience out of this setup. Here's what I've done so far: Plug in using an HDMI cable and an HDMI--D-DVI converter on the monitor side. Open up Screen Resolution. Maximum supported setting is 1920x1080. Tried that (several times) - sometimes it doesn't work at all (blank screen); other times, it only shows the first 1280x800 pixels on the bigger screen. Tried using the Catalyst control center - played with various settings there, couldn't get the screen to show anything interesting. Tried using PowerStrip to set a custom resolution, again, no luck. Spoke to a Dell Preferred Custom Support guy for about an hour before giving up. He remote-accessed my computer, and told me that (1) The maximum supported resolution for XPS 1640 is 1920x1080, and (2) 'it seems to be working from where he sees it, must be a connection issue'. None of this has helped. Does anybody have ideas? Should I be using a different cable set up? Am I using Powerstrip wrong?

    Read the article

  • External USB HD with -optional- mains?

    - by Stephen
    Hi, I'm Christmas-present-buying, and I'd appreciate recommendations for a USB HD with an optional mains power input. I've hunted, but can't find all the information I want (partially due to sketchy product specifications). Background: This is for a digital TV which I do not own, and so I'd like to get it correct first time. The TV has a USB port to allow recording straight to disk, but the manuals don't say how much power can be drawn through the USB port. The manual's instructions state, possibly generically, to plug the drive in before connecting to the TV. Ideally I'd like a small (2.5"?) drive which can draw power over USB, with an mains power input if it turns out the USB port on the TV doesn't offer enough juice. The ideal is to use one cable, two max. A powered USB hub would introduce too much clutter. I've spotted that the LaCie Petit drives have what appears to be an additional power input, but I'm not even sure from the specs what that is. And the device doesn't ship with a mains adapter. Suggestions?

    Read the article

  • How to migrate WinXP from failing old HD to new one

    - by Péter Török
    Following this issue, we have all our important data backed up now. I also bought and installed a new replacement hard disk (WD 160GB PATA) as secondary (slave) drive. I created two primary NTFS partitions on it: a 40 GB system partition, and a 110GB data partition. In theory I could start reinstalling WinXP from scratch on the new system partition, then copying over all user data from the old drive to the new data partition. Once this is done, I could even throw away the old drive, or keep it just to see what happens. (Note: I don't want to clone the whole drive as it contains a dual boot setup with an old Linux installation which I don't need anymore, and anyway, a fresh reinstall would do WinXP good to get rid of many years' clutter.) However, I am lazy :-) The old HD is still functioning, the problem has not manifested again since. So I feel there is no need to hurry with a complete OS reinstall. What I don't know though is whether I will be able to install WinXP on the new system partition at a later stage without affecting the contents of the data partition on the same drive. If this is possible, I can just move over all our data to the new data partition to have it safe, then continue running WinXP from the old drive as long as it works. Does anyone see any problems/risks with this plan?

    Read the article

  • Send SMS from PC through Android Phone

    - by Kaushik Gopal
    I have an HTC Hero Android (European version) unlocked phone. I'm looking for an app that will let me type away on my PC all my text messages and send the SMSs directly from the PC through my phone. I'm basically looking at something like Nokia PC Suite's equivalent.

    Read the article

  • Smartphones : la guerre des brevets est lancée, Google protège-t-il assez HTC et ses partenaires And

    Mise à jour du 30.04.2010 par Katleen Smartphones : la guerre des brevets est lancée, Google protège-t-il assez HTC et ses partenaires Android ? Alors qu'Apple s'emploie déjà depuis plusieurs mois à mettre des bâtons dans les roues d'Android, Microsoft se joint à la danse. Le marché des smartphones est en plein essor et attire de plus en plus les groupes informatiques qui voient en lui un atout stratégique très important. La compétition fait rage et les grands groupes commencent a faire feu de leurs brevets dans cette bataille. Les avocats d'HTC ont été asticotés de toute part, d'abord par Apple puis par Microsoft, à propos de ses téléphones Android. La quatrième ...

    Read the article

  • HTC Incredible displaying blank ImageView

    - by Todd
    HI, I have an app that displays an an image in an ImageView using the setImageDrawable(Drawable) method. However, with the release of the Droid Incredible the images are coming up as a blank screen. I am using Drawable.createFromPath(Environment.getExternalStorageDirectory() + "\imagefile") to access the image from the SD card. I don't get any sort of error, just a black screen. I will get a null pointer exception if after trying to load the image I try to access a property of the Drawable. This makes me believe that the Drawable wasn't loaded, but I don't know why or how to make it work. This code as been working on all other Android devices, so I'm not sure what is different with the Incredible. Unfortunately I don't have access to an Incredible to test on, so I've got to rely on others to test and send me the log files. Any help you can offer would be greatly appreciated. If anyone knows how to replicate this issue on the emulator, that would be helpful too. I've configured an emulator with firmware 7 and the correct screen resolution, but I was unable to replicate the issue. Thanks.

    Read the article

  • CELLPHONE's wifi makes my wireless router disconnect Plz Help me

    - by wifiprobodude
    Hey guys i have a problem. For 7 months now, i have been dealing with internet problems. But i finally found out why my wireless router has been disconnecting randomly. Everytime I enable wifi on my cellphone, my whole router disconnects and lose internet untill i swtich the wifi off on my phone. I dont understand why this is doing this Can anyone help has this happend to you? htc android-wifi everyday-problems And Just to findout it happens with all wifi devices?

    Read the article

  • Creating multiple profiles in Windows Mobile

    - by Saif Bechan
    I have a HTC HD2 which runs Windows Mobile 6.5. The way you can integrate different accounts is just amazing. You can integrate facebook,twitter,youtube. You can also sync your mail, and calendar from Hotmail or Gmail. It all works just great. Now my problem is that I have different profiles. I have my personal profile, and on the other side I have work profile. My work email is on Gmail Apps, so I have a mail and calendar there also. I also have a personal facebook account, and one I use for work. So my question is if there is a way of switching between these profiles quickly.

    Read the article

  • Hitachi DFT hangs - Causes and workarounds?

    - by Ssvarc
    Hitachi DFT hangs (it gets all the way to "Loading DFT" and hangs with a blinking cursor) when I use it on various computers (the latest computer to hang being a Dell Vostro 1000 laptop) and works on others. What determines when it will hang and when it won't? What similar program can I use (boot CD) that can determine HD health reliably? Thanks!

    Read the article

  • iPad3 HD Black Screen in Portrait Orientation

    - by Jason Brooks
    I'm currently updating my game using XCode 4.3.1 and an iPad3. WHen iPAD HD mode is selected, I get a black screen when I change the scene from the AppDelegate. I'm using COCOS2d v1.0.1 My Game is portrait only mode, and I think I've tracked the problem down. If you create a new project with the default HelloWorld Layer, it works on the iPad3 and it's simulator in HD. However if you change the following code :- -(BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { ... #elif GAME_AUTOROTATION == kGameAutorotationUIViewController // // EAGLView will be rotated by the UIViewController // // Sample: Autorotate only in landscpe mode // // return YES for the supported orientations //return ( UIInterfaceOrientationIsLandscape( interfaceOrientation ) ); return ( UIInterfaceOrientationIsPortrait ( interfaceOrientation ) ); //return NO; ... } In RootViewController.m You see a black screen for the iPad3 real device and simulator. It works as expected on all devices, iPhone/iPod Touch, and iPad 1 and 2. If I change the statement back to return ( UIInterfaceOrientationIsLandscape( interfaceOrientation ) ); I get the Hello World rendered to the screen, but it is in landscape only on iPad3. Has anyone else encountered this and have any suggestions for a fix? The project is quite large to upgrade to the latest V1 Beta code.

    Read the article

  • mini linux to use dd and access HD and/or USB

    - by acidzombie24
    I was thinking about something. I want to install a 7gb partition and store 2 compress disk image and install linux to it. I want it to be light. What i would like to do is hide the grub loader (or anything) and if i want to reformat my PC press a certain key on startup. Which will then load the linux OS and then i can use dd to restore the partition i want I plan to use windows XP and windows 7 as my main OS and virtualize anything else i need (vista, dummy XP for testing, multiple linux distos, etc). Bonus points if you can tell me how to hide the partition in windows so XP and 7 cant touch it

    Read the article

  • Realtek HD Audio 5.1 Optical Input (from Xbox 360)

    - by Shevek
    I'm trying to connect up my Xbox 360 digital audio to my 5.1 speakers via my PC (my LCD has dual input, DVI for the PC, D-SUB for the Xbox). The motherboard has a Realtek ALC888 chipset and I have a 5.1 speaker system connected via 3 x 3.5mm jacks (FR/FL, RR/RL, C/LFE) and I get full 5.1 output from the PC. I have connected the optical audio cable from the Xbox to the Optical In on the motherboard's backplate. With the Xbox in Digital Stereo mode I get 2 channel audio from the Xbox, through the PC, to the speakers. With the Xbox in Dolby Digital 5.1 mode I get no sound at all. I have the latest Realtek drivers installed in Win 7 32-bit. Questions: Is it possible to use the full 5.1 DD from the Xbox? If so, am I missing some option(s) in the Realtek setup? Do I need some other piece of software to do this? (AC3Filter or FFDShow perhaps) Many thanks

    Read the article

  • 2 ATI Radeon HD 5870 (crossfire): Intermittent loud fan and non-functioning secondary card

    - by Merritt
    Installed 2 5870s. Left off the left side panel of my case(cooler master haf x), started my computer, installed the drivers and set up the crossfire... yada yada yada... everything worked fine. Then turned off computer, put left side panel back on, turned on computer, and heard a very loud buzzing (asssuming it was a gpu fan). Checked status of cards (in Windows 7) and the secondary card did not appear. Turned off the computer, took off left side panel, jiggled power connectors into secondary card, then turned the computer back on, and it worked again. Put the panel on, turned on computer, worked. Sometime later, turned on computer, and there's that loud fan sound again. What gives?

    Read the article

  • Computer won't recognize second WD internal HD

    - by music man
    I installed a Western Digital Caviar Green 1TB internal hard drive, and want to use it for back up. My BIOS recognizes the device, but it is not recognized in Disk Management. It also is not recognized in "my computer." When I right-click my C drivepropertieshardware, I see it listed. First the drive was plugged into SATA port 1 on my motherboard, then I tried it in port 3, where it remains. I've been working on this for hours. Any help would be appreciated. More info Hard drive model #:WD10EADS-65M2B1 Windows 7 Home Premium 64 bit Service Pack 1 Computer:HP Model p6404y, Processor:AMD phenom II x4 820 2.80GHZ 8 gigs RAM

    Read the article

  • When did my Mac's HD last sleep?

    - by flipdoubt
    Is there any app or log that says when my MacBook Pro's hard drive last went into sleep mode? I ask because each night when I close the MBP's lid without being plugged into a power source, the power light goes into its snooze rhythm but the battery is half-drained by the next morning. It certainly looks like it is asleep, but the power drain seems to indicate otherwise.

    Read the article

  • Migration from XP to Windows 7 using recovered HD

    - by KenK
    Is it possible to migrate the Windows XP Pro 32 bit operating system, applications etc from a USB external drive which is the recovered hard drive from that failed system to my new desktop computer with Windows7 64 bit system? In doing so, I would like to set up the new computer with the OS and all general applications on the primary 1TB hard drive while the secondary 1TB hard drive to have nothing else but graphics programs and gaming applications complete with their related files and add-ons. What will I need to accomplish this task efficiently and economically?

    Read the article

  • Software to convert .m2ts to .mts (HD video files)

    - by Kelsey
    I am looking to convert some of .m2ts video files (about 80GB worth) to .mts format which the my current camera is produces natively. Is there any free software that anyone has used that can do this? I know the .m2ts is the container so I am not sure just doing a rename of the extension to .mts is valid. It works but I am not sure it is actually producing an mts stream.

    Read the article

  • Editting HD Quicktime .mov files in Windows

    - by NoCarrier
    I recently purchased one of those new wave of point & shoot digicams (canon SD780) that shoot high definition 720p video. Unfortunately it only writes to Quicktime files. How can I go about editing these in Windows without spending any money? I found a few MOV to AVI or WMV converters but am experiencing some quality degradation in the output.

    Read the article

  • Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

    - by Adam Driscoll
    I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

    Read the article

  • how to format external hd western digital when all ntfs boot sectors are unwritable

    - by FRATZESKOS
    I WANT TO FORMAT MY EXTERNAL HARD DRIVE WHICH IS A WESTERN DIGITAL 500GB, THROUGH CMD DOS COMMAND BUT IT FAILS BECAUSE ALL NTFS BOOT SECTORS ARE UNWRITABLE. HERE ARE THE COMMANDS I GAVE AND WHAT I GOT IN RETURN! C:\Users\Stefanos&FratzeskosFORMAT F: /Q The type of the file system is RAW. The new file system is NTFS. WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE F: WILL BE LOST! Proceed with Format (Y/N)? Y QuickFormatting 476269M Volume label (32 characters, ENTER for none)? Creating file system structures. The first NTFS boot sector is unwriteable. All NTFS boot sectors are unwriteable. Cannot continue. Format failed. IS THERE SOMETHING I CAN DO TO FORMAT MY DISC?

    Read the article

  • HD failure questions ...

    - by JP
    I recently had one of my home PC hard drives fail. It was in a striped raid, so I had to rebuild the raid (no data lost, only the OS partition was there). Is there any way to diagnose exactly what went wrong with the drive? That is what caused the failure? Also, in general, what is a good way to dispose of a failed hard drive securely and realistically (I don't have thermite or muriatic acid)?

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >