Search Results

Search found 2417 results on 97 pages for 'mb'.

Page 11/97 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• Airtel 3G in Chennai – User experience, Price & What’s the catch?

  - by Boonei

  Finally ! Here we are with Airtel 3G in India. Now Airtel customers can have a go at real 3G speed. Sources suggest that the delay in rolling out 3G was due to hardware problems. It was provided by Ericsson. Now first things first. Let me get to the point. I had subscribed to Airtel’s 3G pack Rs.100 for 100 MB. This is to check out how good it is, did not want to pay a hefty sum at the first instance. It was pretty smooth upgrading.. After the upgrade I did see the much awaited 3G signal bar on my phone. Ok! now its testing time. User experience First I did a bit of browsing, boy ! it was pretty quick, web pages loaded in a jiffy. I really did not time it because it loaded really quick. I loaded a YouTube Video, no buffering, watched the 4 min Video with no problems, it took around 6 MB of data usage Made a Skype call for about 6 min, voice clarity was really good and data usage was around 4-5 MB Tried Google Maps everything was so fast could not see the difference between computer and my phone, used it for about couple of minutes. Did listen to an Online Radio for about 5 min took about 8 MB of data usage Guess there is no need to say about Facebook or Twitter. It was good obviously. Video Call – Not yet tested Price – Do you get what you pay for ? 3G speed is fantastic, you have to really feel it to enjoy it. But currently in Airtel, 3G is available only in 3 places wiz. Bengaluru, Chennai, Coimbatore. ok ! Its not even there in all the metros? hmmm. 3G signal was not available in all parts of Chennai, often in many places it changed to 2G. Let alone all the places, even in my house when walking from one room to another sometimes its shows 2G. When it chaged from 3G to 2G there was lag in the application when it was loading data which often made me wonder if the application hanged. Currently prices not low. 2G plans in Airtel is Rs.98 for 2GB and for Rs.100 its only 100MB in 3G. Now you decide please, it’s quite a debate. The Catch – There is always a catch right ? If you have bought 3G connection and in places where 3G is not available (2G) and use any application that requires data connections (youtube, browse, chat etc) its changed with 3G!. Meaning if you have bought 100MB of 3G by paying Rs.100 like I did, suppose you used the connection for about 10MB using 2G, then it would reduce from the 100MB to 90 MB….That’s bad ! You cannot have 2G and 3G plans activated at the same point of time in your phone. You will pay 3G price for using 2G. This article titled,Airtel 3G in Chennai – User experience, Price & What’s the catch?, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Get Exchange Online Mailbox Size in GB

  - by Brian Jackett

  As mentioned in my previous post I was recently working with a customer to get started with Exchange Online PowerShell commandlets.  In this post I wanted to follow up and show one example of a difference in output from commandlets in Exchange 2010 on-premises vs. Exchange Online.   Problem    The customer was interested in getting the size of mailboxes in GB.  For Exchange on-premises this is fairly easy.  A fellow PFE Gary Siepser wrote an article explaining how to accomplish this (click here).  Note that Gary’s script will not work when remoting from a local machine that doesn’t have the Exchange object model installed.  A similar type of scenario exists if you are executing PowerShell against Exchange Online.  The data type for TotalItemSize  being returned (ByteQuantifiedSize) exists in the Exchange namespace.  If the PowerShell session doesn’t have access to that namespace (or hasn’t loaded it) PowerShell works with an approximation of that data type.    The customer found a sample script on this TechNet article that they attempted to use (minor edits by me to fit on page and remove references to deleted item size.)   Get-Mailbox -ResultSize Unlimited | Get-MailboxStatistics | Select DisplayName,StorageLimitStatus, ` @{name="TotalItemSize (MB)"; expression={[math]::Round( ` ($_.TotalItemSize.Split("(")[1].Split(" ")[0].Replace(",","")/1MB),2)}}, ` ItemCount | Sort "TotalItemSize (MB)" -Descending | Export-CSV "C:\My Documents\All Mailboxes.csv" -NoTypeInformation     The script is targeted to Exchange 2010 but fails for Exchange Online.  In Exchange Online when referencing the TotalItemSize property though it does not have a Split method which ultimately causes the script to fail.   Solution    A simple solution would be to add a call to the ToString method off of the TotalItemSize property (in bold on line 5 below).   Get-Mailbox -ResultSize Unlimited | Get-MailboxStatistics | Select DisplayName,StorageLimitStatus, ` @{name="TotalItemSize (MB)"; expression={[math]::Round( ` ($_.TotalItemSize.ToString().Split("(")[1].Split(" ")[0].Replace(",","")/1MB),2)}}, ` ItemCount | Sort "TotalItemSize (MB)" -Descending | Export-CSV "C:\My Documents\All Mailboxes.csv" -NoTypeInformation      This fixes the script to run but the numerous string replacements and splits are an eye sore to me.  I attempted to simplify the string manipulation with a regular expression (more info on regular expressions in PowerShell click here).  The result is a workable script that does one nice feature of adding a new member to the mailbox statistics called TotalItemSizeInBytes.  With this member you can then convert into any byte level (KB, MB, GB, etc.) that suits your needs.  You can download the full version of this script below (includes commands to connect to Exchange Online session). $UserMailboxStats = Get-Mailbox -RecipientTypeDetails UserMailbox ` -ResultSize Unlimited | Get-MailboxStatistics $UserMailboxStats | Add-Member -MemberType ScriptProperty -Name TotalItemSizeInBytes ` -Value {$this.TotalItemSize -replace "(.*\()|,| [a-z]*\)", ""} $UserMailboxStats | Select-Object DisplayName,@{Name="TotalItemSize (GB)"; ` Expression={[math]::Round($_.TotalItemSizeInBytes/1GB,2)}}   Conclusion    Moving from on-premises to the cloud with PowerShell (and PowerShell remoting in general) can sometimes present some new challenges due to what you have access to.  This means that you must always test your code / scripts.  I still believe that not having to physically RDP to a server is a huge gain over some of the small hurdles you may encounter during the transition.  Scripting is the future of administration and makes you more valuable.  Hopefully this script and the concepts presented help you be a better admin / developer.         -Frog Out     Links The Get-MailboxStatistics Cmdlet, the TotalitemSize Property, and that pesky little “b” http://blogs.technet.com/b/gary/archive/2010/02/20/the-get-mailboxstatistics-cmdlet-the-totalitemsize-property-and-that-pesky-little-b.aspx   View Mailbox Sizes and Mailbox Quotas Using Windows PowerShell http://technet.microsoft.com/en-us/exchangelabshelp/gg576861#ViewAllMailboxes   Regular Expressions with Windows PowerShell http://www.regular-expressions.info/powershell.html   “I don’t always test my code…” image http://blogs.pinkelephant.com/images/uploads/conferences/I-dont-always-test-my-code-But-when-I-do-I-do-it-in-production.jpg   The One Thing: Brian Jackett and SharePoint 2010 http://www.youtube.com/watch?v=Sg_h66HMP9o

  Read the article

• Performance required to improve Windows Experience Index?

  - by Ian Boyd

  Is there a guide on the metrics required to obtain a certain Windows Experience Index? A Microsoft guy said in January 2009: On the matter of transparency, it is indeed our plan to disclose in great detail how the scores are calculated, what the tests attempt to measure, why, and how they map to realistic scenarios and usage patterns. Has that amount of transparency happened? Is there a technet article somewhere? If my score was limited by my Memory subscore of 5.9. A nieve person would suggest: Buy a faster RAM Which is wrong of course. From the Windows help: If your computer has a 64-bit central processing unit (CPU) and 4 gigabytes (GB) or less random access memory (RAM), then the Memory (RAM) subscore for your computer will have a maximum of 5.9. You can buy the fastest, overclocked, liquid-cooled, DDR5 RAM on the planet; you'll still have a maximum Memory subscore of 5.9. So in general the knee-jerk advice "buy better stuff" is not helpful. What i am looking for is attributes required to achieve a certain score, or move beyond a current limitation. The information i've been able to compile so far, chiefly from 3 Windows blog entries, and an article: Memory subscore Score Conditions ======= ================================ 1.0 < 256 MB 2.0 < 500 MB 2.9 <= 512 MB 3.5 < 704 MB 3.9 < 944 MB 4.5 <= 1.5 GB 5.9 < 4.0GB-64MB on a 64-bit OS Windows Vista highest score 7.9 Windows 7 highest score Graphics Subscore Score Conditions ======= ====================== 1.0 doesn't support DX9 1.9 doesn't support WDDM 4.9 does not support Pixel Shader 3.0 5.9 doesn't support DX10 or WDDM1.1 Windows Vista highest score 7.9 Windows 7 highest score Gaming graphics subscore Score Result ======= ============================= 1.0 doesn't support D3D 2.0 supports D3D9, DX9 and WDDM 5.9 doesn't support DX10 or WDDM1.1 Windows Vista highest score 6.0-6.9 good framerates (e.g. 40-50fps) at normal resoltuions (e.g. 1280x1024) 7.0-7.9 even higher framerates at even higher resolutions 7.9 Windows 7 highest score Processor subscore Score Conditions ======= ========================================================================== 5.9 Windows Vista highest score 6.0-6.9 many quad core processors will be able to score in the high 6 low 7 ranges 7.0+ many quad core processors will be able to score in the high 6 low 7 ranges 7.9 8-core systems will be able to approach 8.9 Windows 7 highest score Primary hard disk subscore (note) Score Conditions ======= ======================================== 1.9 Limit for pathological drives that stop responding when pending writes 2.0 Limit for pathological drives that stop responding when pending writes 2.9 Limit for pathological drives that stop responding when pending writes 3.0 Limit for pathological drives that stop responding when pending writes 5.9 highest you're likely to see without SSD Windows Vista highest score 7.9 Windows 7 highest score Bonus Chatter You can find your WEI detailed test results in: C:\Windows\Performance\WinSAT\DataStore e.g. 2011-11-06 01.00.19.482 Disk.Assessment (Recent).WinSAT.xml <WinSAT> <WinSPR> <DiskScore>5.9</DiskScore> </WinSPR> <Metrics> <DiskMetrics> <AvgThroughput units="MB/s" score="6.4" ioSize="65536" kind="Sequential Read">89.95188</AvgThroughput> <AvgThroughput units="MB/s" score="4.0" ioSize="16384" kind="Random Read">1.58000</AvgThroughput> <Responsiveness Reason="UnableToAssess" Kind="Cap">TRUE</Responsiveness> </DiskMetrics> </Metrics> </WinSAT> Pre-emptive snarky comment: "WEI is useless, it has no relation to reality" Fine, how do i increase my hard-drive's random I/O throughput? Update - Amount of memory limits rating Some people don't believe Microsoft's statement that having less than 4GB of RAM on a 64-bit edition of Windows doesn't limit the rating to 5.9: And from xxx.Formal.Assessment (Recent).WinSAT.xml: <WinSPR> <LimitsApplied> <MemoryScore> <LimitApplied Friendly="Physical memory available to the OS is less than 4.0GB-64MB on a 64-bit OS : limit mem score to 5.9" Relation="LT">4227858432</LimitApplied> </MemoryScore> </LimitsApplied> </WinSPR> References Windows Vista Team Blog: Windows Experience Index: An In-Depth Look Understand and improve your computer's performance in Windows Vista Engineering Windows 7 Blog: Engineering the Windows 7 “Windows Experience Index”

  Read the article

• Load a MySQL innodb database into memory

  - by jack

  I have a MySQL innodb database at 1.9GB, showed by following command. SELECT table_schema "Data Base Name", -> sum( data_length + index_length ) / 1024 / -> 1024 "Data Base Size in MB", -> sum( data_free )/ 1024 / 1024 "Free Space in MB" -> FROM information_schema.TABLES -> GROUP BY table_schema ; +--------------------+----------------------+------------------+ | Data Base Name | Data Base Size in MB | Free Space in MB | +--------------------+----------------------+------------------+ | database_name | 1959.73437500 | 31080.00000000 | My questions are: Does it mean if I set the innodb_buffer_pool_size to 2GB or larger, the whole database can be loaded into memory so much fewer read from disk requests are needed? What does the free space of 31GB mean? If the maximum RAM can be allocated to innodb_buffer_pool_size is 1GB, is it possible to specify which tables to loaded into memory while keep others always read from disk? Thanks in advance.

  Read the article

• How to install MariaDB rpms in CentOS 6.4 using rpm (not yum cmd) + handling mysql-libs conflicts

  - by Pat C

  I need to script the install of MariaDB using the rpm command in CentOS 6.4. I can't use yum since it's going to be an offline install so there's no access to the repository. The only MySQL package installed is mysql-libs as various other packages in CentOS depend on it. When I did a test install of MariaDB with yum it correctly accounted for mysql-libs and uninstalled it at the end as MariaDB could handle the dependencies after it was installed: [root@new-host-6 ~]# yum install MariaDB-client MariaDB-common MariaDB-compat MariaDB-devel MariaDB-server MariaDB-shared Loaded plugins: downloadonly, fastestmirror, refresh-packagekit, security, verify Loading mirror speeds from cached hostfile * base: mirrors.kernel.org * extras: mirror.keystealth.org * updates: mirror.umd.edu Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package MariaDB-client.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-common.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-compat.x86_64 0:5.5.32-1 will be obsoleting ---> Package MariaDB-devel.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-server.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-shared.x86_64 0:5.5.32-1 will be obsoleting ---> Package mysql-libs.x86_64 0:5.1.66-2.el6_3 will be obsoleted --> Finished Dependency Resolution Dependencies Resolved ==================================================================================================================================================================== Package Arch Version Repository Size ==================================================================================================================================================================== Installing: MariaDB-client x86_64 5.5.32-1 mariadb 10 M MariaDB-common x86_64 5.5.32-1 mariadb 23 k MariaDB-compat x86_64 5.5.32-1 mariadb 2.7 M replacing mysql-libs.x86_64 5.1.66-2.el6_3 MariaDB-devel x86_64 5.5.32-1 mariadb 5.6 M MariaDB-server x86_64 5.5.32-1 mariadb 34 M MariaDB-shared x86_64 5.5.32-1 mariadb 1.1 M replacing mysql-libs.x86_64 5.1.66-2.el6_3 Transaction Summary ==================================================================================================================================================================== Install 6 Package(s) Total download size: 53 M Is this ok [y/N]: y Downloading Packages: (1/6): MariaDB-5.5.32-centos6-x86_64-client.rpm | 10 MB 00:06 (2/6): MariaDB-5.5.32-centos6-x86_64-common.rpm | 23 kB 00:00 (3/6): MariaDB-5.5.32-centos6-x86_64-compat.rpm | 2.7 MB 00:02 (4/6): MariaDB-5.5.32-centos6-x86_64-devel.rpm | 5.6 MB 00:06 (5/6): MariaDB-5.5.32-centos6-x86_64-server.rpm | 34 MB 00:23 (6/6): MariaDB-5.5.32-centos6-x86_64-shared.rpm | 1.1 MB 00:00 -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Total 1.3 MB/s | 53 MB 00:40 warning: rpmts_HdrFromFdno: Header V4 DSA/SHA1 Signature, key ID 1bb943db: NOKEY Retrieving key from https://yum.mariadb.org/RPM-GPG-KEY-MariaDB Importing GPG key 0x1BB943DB: Userid: "Daniel Bartholomew (Monty Program signing key) <[email protected]>" From : https://yum.mariadb.org/RPM-GPG-KEY-MariaDB Is this ok [y/N]: y Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Warning: RPMDB altered outside of yum. Installing : MariaDB-compat-5.5.32-1.x86_64 1/7 Installing : MariaDB-common-5.5.32-1.x86_64 2/7 Installing : MariaDB-server-5.5.32-1.x86_64 3/7 chown: cannot access `/var/lib/mysql': No such file or directory PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER ! To do so, start the server, then issue the following commands: '/usr/bin/mysqladmin' -u root password 'new-password' '/usr/bin/mysqladmin' -u root -h new-host-6 password 'new-password' Alternatively you can run: '/usr/bin/mysql_secure_installation' which will also give you the option of removing the test databases and anonymous user created by default. This is strongly recommended for production servers. See the MariaDB Knowledgebase at http://kb.askmonty.org or the MySQL manual for more instructions. Please report any problems with the '/usr/bin/mysqlbug' script! The latest information about MariaDB is available at http://mariadb.org/. You can find additional information about the MySQL part at: http://dev.mysql.com Support MariaDB development by buying support/new features from Monty Program Ab. You can contact us about this at [email protected]. Alternatively consider joining our community based development effort: http://kb.askmonty.org/en/contributing-to-the-mariadb-project/ Installing : MariaDB-devel-5.5.32-1.x86_64 4/7 Installing : MariaDB-client-5.5.32-1.x86_64 5/7 Installing : MariaDB-shared-5.5.32-1.x86_64 6/7 Erasing : mysql-libs-5.1.66-2.el6_3.x86_64 7/7 Verifying : MariaDB-common-5.5.32-1.x86_64 1/7 Verifying : MariaDB-server-5.5.32-1.x86_64 2/7 Verifying : MariaDB-devel-5.5.32-1.x86_64 3/7 Verifying : MariaDB-client-5.5.32-1.x86_64 4/7 Verifying : MariaDB-compat-5.5.32-1.x86_64 5/7 Verifying : MariaDB-shared-5.5.32-1.x86_64 6/7 Verifying : mysql-libs-5.1.66-2.el6_3.x86_64 7/7 Installed: MariaDB-client.x86_64 0:5.5.32-1 MariaDB-common.x86_64 0:5.5.32-1 MariaDB-compat.x86_64 0:5.5.32-1 MariaDB-devel.x86_64 0:5.5.32-1 MariaDB-server.x86_64 0:5.5.32-1 MariaDB-shared.x86_64 0:5.5.32-1 Replaced: mysql-libs.x86_64 0:5.1.66-2.el6_3 Complete! My question is, what is the equivalent way to install the MariaDB packages using the rpm command only as opposed to yum? If I do rpm -ivh MariaDB*.rpm, I will get a ton of messages like the following about conflicts with mysql-libs: file /etc/my.cnf from install of MariaDB-common-5.5.32-1.x86_64 conflicts with file from package mysql-libs-5.1.66-2.el6_3.x86_64 file /usr/share/mysql/charsets/Index.xml from install of MariaDB-common-5.5.32-1.x86_64 conflicts with file from package mysql-libs-5.1.66-2.el6_3.x86_64 I then used the --force option to install the MariaDB rpms and uninstalled mysql-lib, I didn't get any weird messages but I'm not sure that is the cleanest method to handle the conflicts and do the install. So can someone confirm that installing MariaDB with the following rpm commands would be the same as using yum to install the packages and handle mysql-libs conflicts/removal: rpm -ivh --force MariaDB*.rpm rpm -e mysql-libs Thanks for any input!

  Read the article

• Hosting a database?

  - by user296516

  Hi, I was kinda puzzled by seeing that most hosting plans do offer, say, 12.000 MB disk space and 60 MB Database space... what is the difference between this two and what do I do if I need like a few gigs for a database and only some tens of MB for the rest of the site?

  Read the article

• Auto-hide JMenuBar

  - by PeterMmm

  When i run the code above the frame's menu bar come up when the mouse moves to the upper part of the window. The problem is when i open the menu but do not select any item and move out the mouse the menu bar get invisible but the items stay on screen. public class Test extends JFrame { public Test() { setLayout(new BorderLayout()); setSize(300, 300); JMenuBar mb = new JMenuBar(); setJMenuBar(mb); mb.setVisible(false); JMenu menu = new JMenu("File"); mb.add(menu); menu.add(new JMenuItem("Item-1")); menu.add(new JMenuItem("Item-2")); addMouseMotionListener(new MouseAdapter() { @Override public void mouseMoved(MouseEvent e) { getJMenuBar().setVisible(e.getY() < 50); } }); } public static void main(String args[]) { new Test().setVisible(true); } }

  Read the article

• memory issue iPad 4.2 crashes

  - by Manoj Kumar

  I am developing a application which receives 600-700 KB of XML data from the server. I have to do some manipulations in that data so once received the data the memory increases to 600 KB to 2 M.B. Already view occupied 4 M.B of memory in the application. So while processing the XML data i m doing some manipulation(pre-parsing) and the memory increases to 600 K.B to 2 M.B and finally decreases to 600 K.B. due to increase in memory, application gives the memory warning. While getting memory warning i m releasing all the views in the navigation controller but it releases only 1 M.B of memory. Even though I release all the views the application is crashing. Please help me out in this issue. It happens in iPad 4.2. Thanks in advance

  Read the article

• PHP file upload

  - by Develman

  I have big trouble with file uploads with php. My own tests are successful but my colleague is telling me that he cannot update "larger" (ca. 5mb) files. Phpinfo says: - max_execution_time 30 - memory_limit 32 Mb - post_max_size 8 Mb - upload_max_filesize 10 Mb Is it better to use FTP? The problem is that I cannot change these settings at my webhoster.

  Read the article

• Memory Warning but Small Live Bytes

  - by Kamchatka

  Hi everyone, In my application, I get a memory warning of level 1 and then 2 after repeating some action (choosing a picture + processing) several times and then a crash. The leak tool doesn't show any leak. I'm also following the Allocations tool in Instruments and my Live Bytes are roughly 4 MB, overall I allocate 113 MB. At maximum I have maybe 20 MB in memory when the picture is loaded. Since I have to repeat an action to get to the crash, it is very likely to be a memory leak. However, I don't know how to locate it since my live bytes are 4 MB and things supposed to be allocated (apart a small leak of ~100 KB in the UIImagePickerController). How much can I trust the memory leak/allocation tools? Would you have an advice to help me locate the reason of the problem?

  Read the article

• mod_perl memory leak

  - by marghi

  Hello, I recently discovered that one of our sites has a memory leak in it, it's very strange because it happened all of the sudden. I've used GTop to measure the memory size per process and it tells me that the real value is somewhere around 65 MB (on the server) per request and and additional 5 MB shared. I tried preloading the modules in the startup.pl file a indicated in the performance tuning article for mod_perl. Nothing happened if fact the shared memory decreased down to 3.7 MB, in this situation I thought that my application is leaking memory do before any line of code got executed I measured the memory just to find out that the total value is in fact 64 MB, my questions are: Is there a default preallocation of memory for each process? Is there a configuration issue? Is mod_perl leaking memory ? Thank you very much.

  Read the article

• How to estimate memory need by XPathDocument for a specific xml file

  - by bill seacham

  Is there any way to estimate the memory requirement for creating an XpathDocument instance based on the file size of the xml? XpathDocument xdoc = new XpathDocument(xmlfile); Is there any way to programmatically stop the process of creating the XpathDocument if memory drops to a very low level? Since it loads the entire xml into memory, it would be nice to know ahead of time if the xml is too big. What I have found is that when I create a new XpathDocument with a big xml file, an outofmemory exception is never fired, but that the process slows to a crawl, only 5 Mb of memory remains a available and the Task Manager reports it is not responding. This happened with a 266 Mb xml file when there was 584 Mb of ram. I was able to load a 150 Mb file with no problems in 18. After loading the xml, I want to do xpath queries using an XpathNavigator and an XpathNodeIterator. I am using .net 2.0, xp sp3.

  Read the article

• CUDA driver installation on a laptop with nVidia NVS140M card

  - by stanigator

  I'm trying to first figure out if my computer contains a CUDA-enabled card. It has an nVidia NVS 140M card, but I can't seem to figure out if it is the 128 MB version or 256 MB version. On the laptop purchase receipt, I found out that I ordered the 128 MB version, but the control panel description of the card said otherwise as shown below: When I ran the CUDA driver from nVidia's site, it cannot find a hardware compatible with CUDA (even though the product series is CUDA-enabled, the card does not have 256 MB minimum of memory to do so). What would be your recommendations in this case with trying to use CUDA on this computer (I'm not sure if nothing can be done at this point)? Thanks in advance.

  Read the article

• reporting tool/viewer for large datasets

  - by FrustratedWithFormsDesigner

  I have a data processing system that generates very large reports on the data it processes. By "large" I mean that a "small" execution of this system produces about 30 MB of reporting data when dumped into a CSV file and a large dataset is about 130-150 MB (I'm sure someone out there has a bigger idea of "large" but that's not the point... ;) Excel has the ideal interface for the report consumers in the form of its Data Lists: users can filter and segment the data on-the-fly to see the specific details that they are interested in - they can also add notes and markup to the reports, create charts, graphs, etc... They know how to do all this and it's much easier to let them do it if we just give them the data. Excel was great for the small test datasets, but it cannot handle these large ones. Does anyone know of a tool that can provide a similar interface as Excel data lists, but that can handle much larger files? The next tool I tried was MS Access, and found that the Access file bloats hugely (30 MB input file leads to about 70 MB Access file, and when I open the file, run a report and close it the file's at 120-150 MB!), the import process is slow and very manual (currently, the CSV files are created by the same plsql script that runs the main process so there's next to no intervention on my part). I also tried an Access database with linked tables to the database tables that store the report data and that was many times slower (for some reason, sqlplus could query and generate the report file in a minute or soe while Access would take anywhere from 2-5 minutes for the same data) (If it helps, the data processing system is written in PL/SQL and runs on Oracle 10g.)

  Read the article

• How do I know if my PHP application is using too much memory?

  - by John

  I'm working on a PHP web application that let's users network with each other, book events, message etc... I launched it a few months ago and at the moment, there's only about 100 users. I set up the application on a VPS with ubuntu 9.10, apache 2, mysql 5 and php 5. I had 360 Mb of RAM, but upgraded to 720 MB a few minutes ago. Lately, my web application has been experiencing outages due to excessive memory usage. From what I can tell in error logs, it seems the server automatically kills apache processes that consume too much memory. As a result, I upgraded memory from 360 MB to 720 MB as a stop-gap measure. So my question is, how do I go about resolving these outage issues? How do I know if my website's need for more memory is due to poor code or if it's part of the website's natural growth? What's the most efficient way to determine which PHP scripts consume the most memory?

  Read the article

• Quantifying the Performance of Garbage Collection vs. Explicit Memory Management

  - by EmbeddedProg

  I found this article here: Quantifying the Performance of Garbage Collection vs. Explicit Memory Management http://www.cs.umass.edu/~emery/pubs/gcvsmalloc.pdf In the conclusion section, it reads: Comparing runtime, space consumption, and virtual memory footprints over a range of benchmarks, we show that the runtime performance of the best-performing garbage collector is competitive with explicit memory management when given enough memory. In particular, when garbage collection has five times as much memory as required, its runtime performance matches or slightly exceeds that of explicit memory management. However, garbage collection’s performance degrades substantially when it must use smaller heaps. With three times as much memory, it runs 17% slower on average, and with twice as much memory, it runs 70% slower. Garbage collection also is more susceptible to paging when physical memory is scarce. In such conditions, all of the garbage collectors we examine here suffer order-of-magnitude performance penalties relative to explicit memory management. So, if my understanding is correct: if I have an app written in native C++ requiring 100 MB of memory, to achieve the same performance with a "managed" (i.e. garbage collector based) language (e.g. Java, C#), the app should require 5*100 MB = 500 MB? (And with 2*100 MB = 200 MB, the managed app would run 70% slower than the native app?) Do you know if current (i.e. latest Java VM's and .NET 4.0's) garbage collectors suffer the same problems described in the aforementioned article? Has the performance of modern garbage collectors improved? Thanks.

  Read the article

• HP SmartArray P400: How to repair failed logical drive?

  - by TegtmeierDE

  I have a HP Server with SmartArray P400 controller (incl. 256 MB Cache/Battery Backup) with a logicaldrive with replaced failed physicaldrive that does not rebuild. This is how it looked when I detected the error: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, Failed) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) unassigned physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SATA, 750 GB, OK) ~# I thought that I had drive 2I:1:8 configured as a spare for Array A and Array B, but it seems this was not the case :-(. I noticed the problem due to I/O errors on the host, even if only 1 physicaldrive of the RAID5 is failed. Does someone know why this could happen? The logicaldrive should go into "Degraded" mode but still be fully accessible from the host os!? I first tried to add the unassigned drive 2I:1:8 as a spare to logicaldrive 2, but this was not possible: ~# /usr/sbin/hpacucli ctrl slot=0 array B add spares=2I:1:8 Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# Interestingly it is possible to add the unassigned drive to the first array without problems. I thought maybe the controller put the array into "failed" state due to the missing spare and protects failed arrays from modification. So I tried was to reenable the logicaldrive (to add the spare afterwards): ~# /usr/sbin/hpacucli ctrl slot=0 ld 2 modify reenable Warning: Any previously existing data on the logical drive may not be valid or recoverable. Continue? (y/n) y Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# But as you can see, re-enabling the logicaldrive this was not possible. Now I replaced the failed drive by hotswapping it with the unassigned drive. The status now looks like this: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, OK) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) ~# The logical drive is still not accessible. Why is it not rebuilding? What can I do? FYI, this is the configuration of my controller: ~# /usr/sbin/hpacucli ctrl slot=0 show Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: XXXX Cache Serial Number: XXXX RAID 6 (ADG) Status: Enabled Controller Status: OK Chassis Slot: Hardware Revision: Rev E Firmware Version: 5.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Analysis Inconsistency Notification: Disabled Raid1 Write Buffering: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True ~# Thanks for you help in advance.

  Read the article

• GNU/Linux swapping blocks system

  - by Ole Tange

  I have used GNU/Linux on systems from 4 MB RAM to 512 GB RAM. When they start swapping, most of the time you can still log in and kill off the offending process - you just have to be 100-1000 times more patient. On my new 32 GB system that has changed: It blocks when it starts swapping. Sometimes with full disk activity but other times with no disk activity. To examine what might be the issue I have written this program. The idea is: 1 grab 3% of the memory free right now 2 if that caused swap to increase: stop 3 keep the chunk used for 30 seconds by forking off 4 goto 1 - #!/usr/bin/perl sub freekb { my $free = `free|grep buffers/cache`; my @a=split / +/,$free; return $a[3]; } sub swapkb { my $swap = `free|grep Swap:`; my @a=split / +/,$swap; return $a[2]; } my $swap = swapkb(); my $lastswap = $swap; my $free; while($lastswap >= $swap) { print "$swap $free"; $lastswap = $swap; $swap = swapkb(); $free = freekb(); my $used_mem = "x"x(1024 * $free * 0.03); if(not fork()) { sleep 30; exit(); } } print "Swap increased $swap $lastswap\n"; Running the program forever ought to keep the system at the limit of swapping, but only grabbing a minimal amount of swap and do that very slowly (i.e. a few MB at a time at most). If I run: forever free | stdbuf -o0 timestamp > freelog I ought to see swap slowly rising every second. (forever and timestamp from https://github.com/ole-tange/tangetools). But that is not the behaviour I see: I see swap increasing in jumps and that the system is completely blocked during these jumps. Here the system is blocked for 30 seconds with the swap usage increases with 1 GB: secs 169.527 Swap: 18440184 154184 18286000 170.531 Swap: 18440184 154184 18286000 200.630 Swap: 18440184 1134240 17305944 210.259 Swap: 18440184 1076228 17363956 Blocked: 21 secs. Swap increase 2400 MB: 307.773 Swap: 18440184 581324 17858860 308.799 Swap: 18440184 597676 17842508 330.103 Swap: 18440184 2503020 15937164 331.106 Swap: 18440184 2502936 15937248 Blocked: 20 secs. Swap increase 2200 MB: 751.283 Swap: 18440184 885288 17554896 752.286 Swap: 18440184 911676 17528508 772.331 Swap: 18440184 3193532 15246652 773.333 Swap: 18440184 1404540 17035644 Blocked: 37 secs. Swap increase 2400 MB: 904.068 Swap: 18440184 613108 17827076 905.072 Swap: 18440184 610368 17829816 942.424 Swap: 18440184 3014668 15425516 942.610 Swap: 18440184 2073580 16366604 This is bad enough, but what is even worse is that the system sometimes stops responding at all - even if I wait for hours. I have the feeling it is related to the swapping issue, but I cannot tell for sure. My first idea was to tweak /proc/sys/vm/swappiness from 60 to 0 or 100, just to see if that had any effect at all. 0 did not have an effect, but 100 did cause the problem to arise less often. How can I prevent the system from blocking for such a long time? Why does it decide to swapout 1-3 GB when less than 10 MB would suffice?

  Read the article

• Proliant server will not accept new hard disks in RAID 1+0?

  - by Leigh

  I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have one logical drive RAID 1+0 with two 72 gb 10k sas 1 port spare no 376597-001. I had one hard disk fail and ordered a replacement. The configuration utility showed error and would not rebuild the RAID. I presumed a hard disk fault and ordered a replacement again. In the mean time I put the original failed disk back in the server and this started rebuilding. Currently shows ok status however in the log I can see hardware errors. The new disk has come and I again have the same problem of not accepting the hard disk. I have updated the P400 controller with the latest firmware 7.24 , but still no luck. The only difference I can see is the original drive has firmware 0103 (same as the RAID drive) and the new one has HPD2. Any advice would be appreciated. Thanks in advance Logs from server ctrl all show config Smart Array P400 in Slot 1 (sn: PAFGK0P9VWO0UQ) array A (SAS, Unused Space: 0 MB) logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode) physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK) physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed array B (SAS, Unused Space: 0 MB) logicaldrive 2 (558.7 GB, RAID 5, OK) physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 300 GB, OK) ctrl all show config detail Smart Array P400 in Slot 1 Bus Interface: PCI Slot: 1 Serial Number: PAFGK0P9VWO0UQ Cache Serial Number: PA82C0J9VWL8I7 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: E Firmware Version: 7.24 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Status Details: A cache error was detected. Run more information. Cache Ratio: 100% Read / 0% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Battery/Capacitor Count: 0 SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 0 MB Status: Failed Physical Drive Array Type: Data One of the drives on this array have failed or has Logical Drive: 1 Size: 68.5 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 17594 Strip Size: 128 KB Full Stripe Size: 128 KB Status: Interim Recovery Mode Caching: Enabled Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive0 Mount Points: C:\ 68.5 GB Logical Drive Label: A0100539PAFGK0P9VWO0UQ0E93 Mirror Group 0: physicaldrive 2I:1:2 (port 2I:box 1:bay 2, S Mirror Group 1: physicaldrive 2I:1:1 (port 2I:box 1:bay 1, S Drive Type: Data physicaldrive 2I:1:1 Port: 2I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 73.5 GB Rotational Speed: 10000 Firmware Revision: 0103 Serial Number: B379P8C006RK Model: HP DG072A9B7 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:2 Port: 2I Box: 1 Bay: 2 Status: Failed Drive Type: Data Drive Interface Type: SAS Size: 72 GB Rotational Speed: 15000 Firmware Revision: HPD9 Serial Number: D5A1PCA04SL01244 Model: HP EH0072FARUA PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 2 Size: 558.7 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Co Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive1 Mount Points: E:\ 558.7 GB Logical Drive Label: AF14FD12PAFGK0P9VWO0UQD007 Drive Type: Data physicaldrive 1I:1:5 Port: 1I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE07QH300009923X1X3 Model: HP DG0300BALVP Current Temperature (C): 32 Maximum Temperature (C): 45 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:3 Port: 2I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE0AHVH00009924P8F3 Model: HP DG0300BALVP Current Temperature (C): 34 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:4 Port: 2I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE08NAK00009924KWD6 Model: HP DG0300BALVP Current Temperature (C): 35 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown

  Read the article

• An increase to 3 Gig of RAM slows down Ubuntu 10.04 LTS

  - by williepabon

  I have Ubuntu 10.04 running from an external hard drive (installed on an enclosure) connected via USB port. Like a month or so ago, I increased RAM on my pc from 2 Gigs to 3 Gigs. This resulted on extremely long boot times and slow application loads. While I was understanding the nature of my problem, I posted various threads on this forum ( Questions # 188417, 188801), where I was advised to gather speed tests, and other info on my machine. I was also suggested that I might have problems with the RAM installed. Initially, I did not consider that possibility because: 1) I did a memory test with a diagnostic program from DELL (My pc is from Dell) 2) My pc works fine with Windows XP (the default OS), no problems with memory 3) My pc works fine when booting with Ubuntu 10.10 memory stick, no speed problems 4) My pc works fine when booting with Ubuntu 11.10 memory stick, no speed problems Anyway, I performed the memory tests suggested. But before doing it, and to check out any possibility of hardware issues on the hard drive, I did the following: (1) purchased a new hard drive enclosure and moved my hard drive to it, (2) purchased a new USB cable and used it to connect my hard drive/enclosure setup to a different USB port on my pc. Then, I performed speed tests with 1 Gig, 2 Gigs and 3 Gigs of RAM with my Ubuntu 10.04 OS. Ubuntu 10.04 worked well when booted with 1 Gig or 2 Gigs of RAM. When I increased to 3 Gigs, it slowed down to a crawl. I can't understand the relationship between an increase of 1 Gig and the effect it has in Ubuntu 10.04. This doesn't happen with Ubuntu 10.10 and 11.10. Unfortunately for me, Ubuntu 10.04 is my principal work operating system. So, I need a solution for this. Hardware and system information: DELL Precision 670 2 internal SATA Hard drives Audigy 2 ZS audio system Factory OS: Windows XP Professional SP3 NVidia 8400 GTS video card More info: williepabon@WP-WrkStation:~$ uname -a Linux WP-WrkStation 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04 UTC 2012 i686 GNU/Linux williepabon@WP-WrkStation:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 10.04.4 LTS Release: 10.04 Codename: lucid Speed test with the 3 Gigs of RAM installed: williepabon@WP-WrkStation:~$ sudo hdparm -tT /dev/sdc [sudo] password for williepabon: /dev/sdc: Timing cached reads: 84 MB in 2.00 seconds = 41.96 MB/sec Timing buffered disk reads: 4 MB in 3.81 seconds = 1.05 MB/sec This is a very slow transfer rate from a hard drive. I will really appreciate a solution or a work around for this problem. I know that that there are users that have Ubuntu 10.04 with 3 Gigs or more of RAM and they don't have this problem. Same question asked on Launchpad for reference.

  Read the article

• Psychonauts crashes right after entering load save door

  - by user67974

  Psychonauts crashes right after entering the 'Load Save' door. Here is the terminal output: Shader assembly time: 0.88 seconds Found OpenAL device: 'Simple Directmedia Layer' Found OpenAL device: 'ALSA Software' Found OpenAL device: 'OSS Software' Found OpenAL device: 'PulseAudio Software' Opened OpenAL Device: '(null)' ERROR: CAudioDrv::CAudioDrv->alGenSources reports AL_INVALID_VALUE error. PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonfx.isb' to 'WorkResource/Sounds/commonfx.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonvoice.isb' to 'WorkResource/Sounds/commonvoice.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonmusic.isb' to 'WorkResource/Sounds/commonmusic.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonmentalfx.isb' to 'WorkResource/Sounds/commonmentalfx.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonmenfxmem.isb' to 'WorkResource/Sounds/commonmenfxmem.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonfxmem.isb' to 'WorkResource/Sounds/commonfxmem.isb' GameApp::StartUp InitSoundFiles() completed in 0.15 seconds GameApp::StartUp Load some common textures completed in 0.00 seconds WARN: ENGINE: Lua garbage collection starting FreeUnusedBlocksInBuckets released 0 Kb GameApp::StartUp InitEntities() completed in 0.02 seconds PSYCHONAUTS UNIX FILENAME: corrected 'WorkResource/SavedGames/savegameprefs.ini' to 'WorkResource/SAVEDGAMES/savegameprefs.ini' PSYCHONAUTS UNIX FILENAME: corrected 'WorkResource/SavedGames/savegameprefs.ini' to 'WorkResource/SAVEDGAMES/savegameprefs.ini' GameApp::StartUp m_pSaveLoadInterface->Startup() completed in 0.00 seconds GameApp::StartUp m_UserInterface.Setup() completed in 0.00 seconds STUBBED: multisample at EDisplayOptionsWidget (/home/icculus/projects/psychonauts/Source/game/luatest/Game/UIPCDisplayOptions.cpp:97) STUBBED: VK_* at CheckVirtualKey (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:1443) Game: Engine Running hook startup Game: Engine -> SetupGlobalObjects Game: Engine -> SetupLevelMenu Game: Engine -> InitMath GameApp::StartUp InitLua2() completed in 0.00 seconds GameApp::StartUp SetupLevelMenu() completed in 0.00 seconds STUBBED: do we even use this? at InitSocket (/home/icculus/projects/psychonauts/Source/game/luatest/Game/Gameplaylogger.cpp:210) GameApp::StartUp Post-Install total completed in 0.20 seconds Start Up completed in 1.57 seconds UnixMain: StartUp successful.. Working directory: /opt/psychonauts STUBBED: dispatch SDL events at PCMainHandleAnyWindowsMessages (/home/icculus/projects/psychonauts/Source/game/luatest/UnixMain.cpp:56) STUBBED: write me at GetJoystickInput (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:428) STUBBED: write me at GetJoystickActionValue (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:613) PSYCHONAUTS UNIX FILENAME: corrected 'workresource/cutScenes/prerendered/dflogo.bik' to 'WorkResource/cutscenes/prerendered/DFLogo.bik' Prerender subtitle file: workresource\cutScenes\prerendered\dflogo.dfs not found PSYCHONAUTS UNIX FILENAME: corrected 'workresource/cutScenes/prerendered/dflogo.bik' to 'WorkResource/cutscenes/prerendered/DFLogo.bik' STUBBED: fixed function pipeline? at setColorOp (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2097) STUBBED: fixed function pipeline? at setColorArg1 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2106) STUBBED: fixed function pipeline? at setColorArg2 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2115) STUBBED: fixed function pipeline? at setAlphaOp (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2124) STUBBED: fixed function pipeline? at setAlphaArg1 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2133) STUBBED: fixed function pipeline? at setAlphaArg2 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2142) STUBBED: fixed function pipeline? at setProjected (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2223) LOC WARN: Could not open Localization file 'Localization/English/_StringTable.lub' STUBBED: memory status at UpdateMemoryTracking (/home/icculus/projects/psychonauts/Source/game/luatest/Game/GameApp.cpp:4884) WARN: Couldn't resize array to 128; out-of-bounds elements are still in use: Vertex Pool, 188 Loading new level 'STMU' STUBBED: Need multithreaded GL at DisplayLoadingScreen (/home/icculus/projects/psychonauts/Source/game/luatest/Game/LoadingScreen.cpp:83) ========================= Memory post unload level ========================= ========================= LOC WARN: Could not open Localization file 'Localization/English/ST_StringTable.lub' DaveD: Info: Texture pack file contains 137 textures Doing a texture readback for locking! Game: Engine Saved[GLOBAL]: InstaHintFord_HostileRecord = [table] Game: Engine Saved[GLOBAL]: InstaHintFord_HostileOrder = [table] WARN: Redundant packfile read: anims\thought_bubble\bubblefirestarting.jan WARN: Redundant packfile read: anims\thought_bubble\bubbleintothemind.jan WARN: Redundant packfile read: anims\thought_bubble\bubbleinvisibility.jan WARN: Redundant packfile read: anims\thought_bubble\bubblepopperfill.jan WARN: Redundant packfile read: anims\thought_bubble\bubbletelekinesis.jan Initializing level script (if there is one) PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/stfx.isb' to 'WorkResource/Sounds/stfx.isb' Game: Engine Reloading goals: Game: Engine Saved[GLOBAL]: NextEncouragement = '/GLZF014TO/ 10' Game: Engine Saved[GLOBAL]: bUsedSalts = 0 Game: Engine Saved[GLOBAL]: bSTEntered = 1 Game: Engine Saved[GLOBAL]: memoriesST = 1 Game: Engine Saved[GLOBAL]: PsiBallColor = 'red' Game: Engine Saved[ST]: lastSubLevel = 'STMU' Game: Engine LOADING LEVEL st.STMU Game: Engine Saved[CA]: CALevelState = 1 Game: Engine Cutscene progression: CS Script moving from state nil to state nil, resultant state nil. Time: 0.124746672809124. * Stack Trace 1: (null) (line -1, file '(none)) () 2: SpawnScript (line -1, file 'C) (global) 3: onBeginLevel (line -1, file '(none)) (field) 4: (null) (line -1, file '(none)) () WARN: Cannot call GetDirectoryListing when running from the DVD Game: Engine Raz spawning at DartStart startpoint VM : LevelScript could not find script 'doorrimlight1' * Stack Trace 1: (null) (line -1, file '(none)) () WARN: (none(-1) SetEntityAlpha LevelScript: NULL script object passed Game: Engine Saved[GLOBAL]: bLoadedFromMainMenu = 1 Game: Engine Saved[GLOBAL]: NextEncouragement = '/GLZF014TO/ 10' Game: Engine Saved[GLOBAL]: NeedRankIncrement = 0 STUBBED: Need multithreaded GL at HideLoadingScreen (/home/icculus/projects/psychonauts/Source/game/luatest/Game/LoadingScreen.cpp:110) WARN: ENGINE: Lua garbage collection starting FreeUnusedBlocksInBuckets released 0 Kb Game: Engine Saved[GLOBAL]: SplineFigmentTVSizex = 4.51434326171875 Game: Engine Saved[GLOBAL]: SplineFigmentTVSizey = 46.38104248046875 Game: Engine Saved[GLOBAL]: SplineFigmentTVSizez = 47.08810424804688 WARN: (none(-1) SetNewAction LevelScript: no string passed ====================== Asset load progression ====================== Initial: 2.518 MB Vertex, 8.688 MB Texture Level : 3.719 MB Vertex, 22.535 MB Texture Scripts: 3.747 MB Vertex, 22.848 MB Texture ====================== ====================== Memory post level load ====================== ====================== WARN: ENGINE: Lua garbage collection starting FreeUnusedBlocksInBuckets released 0 Kb DaveD: Level loaded in 0.14 seconds Anim: anims\objects\tk_arrow_idle.jan: loaded (1 frames latency) Anim: anims\dartnew\helmet\darthelmetdn.jan: loaded (1 frames latency) Anim: anims\thought_bubble\shieldloop.jan: loaded (1 frames latency) Anim: anims\dartnew\standready.jan: loaded (1 frames latency) Anim: anims\dartnew\walkmove.jan: loaded (1 frames latency) Anim: anims\janitor\hint_end.jan: loaded (1 frames latency) Anim: anims\thought_bubble\ballstatic.jan: loaded (1 frames latency) Anim: anims\dartnew\actionfall.jan: loaded (1 frames latency) Anim: anims\dartnew\standstill.jan: loaded (1 frames latency) Anim: anims\dartnew\pack\packbounce_lf_rt.jan: loaded (1 frames latency) Anim: anims\dartnew\pack\packbounce_up_dn.jan: loaded (1 frames latency) Anim: anims\dartnew\helmet\darthelmetdefpose.jan: loaded (1 frames latency) 1: 1 (number) 1: 1 (number) STUBBED: This is probably wrong at GetDt (/home/icculus/projects/psychonauts/Source/CommonLibs/DFUtil/Profiler.cpp:181) STUBBED: set specular highlights at setSpecularEnable (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Renderer.cpp:2035) Anim: anims\dartnew\trnrtcycle.jan: loaded (1 frames latency) Anim: anims\dartnew\run.jan: loaded (1 frames latency) Anim: anims\dartnew\walk.jan: loaded (1 frames latency) Anim: anims\thought_bubble\bubbledoublejump.jan: loaded (1 frames latency) Anim: anims\dartnew\longjump.jan: loaded (1 frames latency) Anim: anims\menubrain\door1crack.jan: loaded (1 frames latency) Anim: anims\menubrain\door1crackedidle.jan: loaded (1 frames latency) Anim: anims\menubrain\door1closedidle.jan: loaded (1 frames latency) Anim: anims\dartnew\180.jan: loaded (1 frames latency) Anim: anims\menubrain\door3crack.jan: loaded (1 frames latency) Anim: anims\menubrain\door3crackedidle.jan: loaded (1 frames latency) Anim: anims\menubrain\door3closedidle.jan: loaded (1 frames latency) Anim: anims\dartnew\railslide45angle.jan: loaded (1 frames latency) Anim: anims\dartnew\railslideflat.jan: loaded (1 frames latency) Anim: anims\dartnew\trnlfcycle.jan: loaded (1 frames latency) WARN: (none(-1) SetNewAction LevelScript: no string passed Anim: anims\dartnew\mainmenu_jump.jan: loaded (1 frames latency) Anim: anims\menubrain\door1open.jan: loaded (1 frames latency) ERROR: Assert in /home/icculus/projects/psychonauts/Source/game/luatest/../../CommonLibs/Include/../DFGraphics/Color.h, line 96 v.x >= 0.0f && v.x <= 1.0f && v.y >= 0.0f && v.y <= 1.0f && v.z >= 0.0f && v.z <= 1.0f && v.w >= 0.0f && v.w <= 1.0f Encountered Error: Psychonauts has encountered an error /home/icculus/projects/psychonauts/Source/game/luatest/../../CommonLibs/Include/../DFGraphics/Color.h, line 96 v.x >= 0.0f && v.x <= 1.0f && v.y >= 0.0f && v.y <= 1.0f && v.z >= 0.0f && v.z <= 1.0f && v.w >= 0.0f && v.w <= 1.0f Please contact technical support at http://www.doublefine.com. I am currently using Bumblebee for hybrid graphics, if that helps in any way.

  Read the article

• Both 12.10&12.04 Installation freeze

  - by Fih

  A friend of mine is having problems installing Ubuntu. We've tried both 12.10 and 12.04 ver. but each time we get http://img513.imageshack.us/img513/6332/27456089.png and then we got stuck. His comp is: Motherboard: ASUS P5G41-M LX CPU: Pentium(R) Dual-Core CPU E6500 @ 2.93GHz DISK: Disk 500.1 GB SAMSUNG HD502HJ RAM: Slot 1 DDR2 (PC2-6400) 2048 MB Kingston Slot 2 DDR2 (PC2-6400) 2048 MB Hyundai Electronics Graph card: NVIDIA GeForce GT 240 Any solution to this? Bests, Dwig

  Read the article

• Cannot install Acrobat Reader on Ubuntu 12.04.1

  - by user91137

  I have been trying to install Acrobat Reader on my Ubuntu 12.04.1. In the be;ggining, I tried to install it from the software-center, but it crashes with the report: (Reading database ... 189311 files and directories currently installed.) Unpacking acroread (from .../acroread_9.5.1-1precise1_i386.deb) ... dpkg: error processing /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb (--unpack): trying to overwrite '/usr/bin/acroread', which is also in package adobereader-ptb 8.1.7-2 No apport report written because MaxReports is reached already Processing triggers for desktop-file-utils ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for gnome-menus ... Processing triggers for man-db ... Errors were encountered while processing: /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb" As as solution, I tried to install it via terminal, with the $sudo apt-get install acroread and receive the following: arcanjo@arcanjo:~$ sudo apt-get install acroread Lendo listas de pacotes... Pronto Construindo árvore de dependências Lendo informação de estado... Pronto Pacotes sugeridos: libldap2 libgnome-speech7 Os NOVOS pacotes a seguir serão instalados: acroread 0 pacotes atualizados, 1 pacotes novos instalados, 0 a serem removidos e 0 não atualizados. É preciso baixar 60,1 MB de arquivos. Depois desta operação, 142 MB adicionais de espaço em disco serão usados. Obter:1 http://archive.canonical.com/ubuntu/ precise/partner acroread i386 9.5.1-1precise1 [60,1 MB] Baixados 60,1 MB em 4min 17s (234 kB/s) (Lendo banco de dados ... 189311 ficheiros e directórios actualmente instalados.) Desempacotando acroread (de .../acroread_9.5.1-1precise1_i386.deb) ... dpkg: erro processando /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb (--unpack): a tentar sobre-escrever '/usr/bin/acroread', que também está no pacote adobereader-ptb 8.1.7-2 Nenhum relatório apport escrito pois MaxReports já foi atingido Processando gatilhos para desktop-file-utils ... Processando gatilhos para bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processando gatilhos para gnome-menus ... Processando gatilhos para man-db ... Erros foram encontrados durante o processamento de: /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) arcanjo@arcanjo:~$ I've already tried to upgrade and update the apt-get, also tried to remove and re-install the software-center, tried deleting the "problematic" files and re-updating the apt-get... Nothing seems to work... Any solutions?

  Read the article

• Simulating smooth movement along a line after calculating a collision containing a restitution of zero in 2D

  - by Casey

  [for tl;dr see after listing] //...Code to determine shapes types involved in collision here... //...Rectangle-Line collision detected. if(_rbTest->GetCollisionShape()->Intersects(*_ground->GetCollisionShape())) { //Convert incoming shape to a line. a2de::Line l(*dynamic_cast<a2de::Line*>(_ground->GetCollisionShape())); //Get line's normal. a2de::Vector2D normal_vector(l.GetSlope().GetY(), -l.GetSlope().GetX()); a2de::Vector2D::Normalize(normal_vector); //Accumulate forces involved. a2de::Vector2D intermediate_forces; a2de::Vector2D normal_force = normal_vector * _rbTest->GetMass() * _world->GetGravityHandler()->GetGravityValue(); intermediate_forces += normal_force; //Calculate final velocity: See [1] double Ma = _rbTest->GetMass(); a2de::Vector2D Ua = _rbTest->GetVelocity(); double Mb = _ground->GetMass(); a2de::Vector2D Ub = _ground->GetVelocity(); double mCr = Mb * _ground->GetRestitution(); a2de::Vector2D collision_velocity( ((Ma * Ua) + (Mb * Ub) + ((mCr * Ub) - (mCr * Ua))) / (Ma + Mb)); //Calculate reflection vector: See [2] a2de::Vector2D reflect_velocity( -collision_velocity + 2 * (a2de::Vector2D::DotProduct(collision_velocity, normal_vector)) * normal_vector ); //Affect velocity to account for restitution of colliding bodies. reflect_velocity *= (_ground->GetRestitution() * _rbTest->GetRestitution()); _rbTest->SetVelocity(reflect_velocity); //THE ULTIMATE ISSUE STEMS FROM THE FOLLOWING LINE: //Move object away from collision one pixel to prevent constant collision. _rbTest->SetPosition(_rbTest->GetPosition() + normal_vector); _rbTest->ApplyImpulse(intermediate_forces); } Sources: (1) Wikipedia: Coefficient of Restitution: Speeds after impact (2) Wikipedia: Specular Reflection: Direction of reflection First, I have a system in place to account for friction (that is, a coefficient of friction) but is not used right now (in addition, it is zero, which should not affect the math anyway). I'll deal with that after I get this working. Anyway, when the restitution of either object involved in the collision is zero the object stops as required, but if movement along the same direction (again, irrespective of the friction value that isn't used) as the line is attempted the object moves as if slogging through knee deep snow. If I remove the line of code in question and the object is not push away one pixel the object barely moves at all. All because the object collides, is stopped, is pushed up, collides, is stopped...etc. OR collides, is stopped, collides, is stopped, etc... TL;DR How do I only account for a collision ONCE for restitution purposes (BONUS: but CONTINUALLY for frictional purposes, to be implemented later)

  Read the article

• install Ubuntu and remove Windows 7

  - by dani

  I'm using Windows 7 on my laptop (2GB RAM, 250 GB HDD). I want to install Ubuntu and remove Windows 7. I have Partitioned my laptop into 2 partitions: , C Drive - 105 GB and D Drive - 145 GB. I want to install Ubuntu on C drive all my data in D drive, no backup I have already selected the "Try something else option " /dev/sdb /dev/sdb1 ntfs 104855 MB unknown C drive /dev/sdb5 ntfs 145192 MB unknown D drive I need help using the "Try Something Else" Option My course of action: laptop power on bootubuntu nextsomething elsepartition.

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >