Search Results

Search found 8023 results on 321 pages for 'admin topics'.

Page 110/321 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• The Web Hosting Connundrum for "not quite" developers

  - by saltcod

  Hey all, Apologies if this post feels like its been covered elsewhere, but I don't think it has. I've been down a winding web hosting road. To date, I've tried: Joyent, Media Temple, Bluehost, Hostgator, and finally Linode. The reason for switching are likely obvious to everyone: speed. With the exception of the lightening fast Linode, all of the shared hosts are absolutely sloooow. What do do when you're not really a "developer" While I'v grown addicted to the speed of Linode, I really don't feel like its where I should be. I have this nagging feeling in the back of my mind that one of these days (likely soon), I'm going to run into something that i won't be able to figure out and i'll have days worth of downtime. Just the other day, for example, I realized that one of my domains wasn't sending emails. After 4(!) hours looking into the problem, I still can't get sendmail or postfix to work. Four hours!! I want to be a Drupal expert, not a Ubuntu expert That's really the heart of my problem: I spend way too much time learning Ubuntu's ins-and-outs, and not nearly enough time working on Drupal. So here goes: Is there a web host out there anywhere that offers the speed of Linode, but will let me focus on Drupal instead of sys-admin-ing? Thanks! [ I know, I know. There are going to be lots of people who read this saying - "just learn Ubuntu like a real developer". And I get that. I do. But when I work full-time and try and develop some of these sites in my evenings and weekends, I'm really feeling like the sys-admin stuff gets in the way.

  Read the article

• Virtual Host Configuration and mod_rewrite - Removing PHP Extension and Adding Forward Slash

  - by nicorellius

  On my production server, things are fine: PHP extension removal and trailing slash rules are in place in my .htaccess file. But locally, this isn't working (well, partially, anyway). I'm running Apache2 with a virtual host for the site in question. I decided to not use the .htaccess file in this case and just add the rules to the httpd-vhosts.conf file instead, which, I've heard, if possible on your server, is a better way to go. The virtual host is working and the URL I use for my site is like this: devserver:9090 Here is my httpd-vhosts.conf file: NameVirtualHost *:9090 # for stuff other than this site <VirtualHost *:9090> ServerAdmin admin@localhost DocumentRoot "/opt/lampstack/apache2/htdocs" ServerName localhost </VirtualHost> # for site in question <VirtualHost *:9090> ServerAdmin admin@localhost DocumentRoot "/opt/lampstack/apache2/htdocs/devserver" ServerName devserver <Directory "/opt/lampstack/apache2/htdocs/devserver"> Options Indexes FollowSymLinks Includes AllowOverride None Order allow,deny Allow from all </Directory> <IfModule rewrite_module> RewriteEngine ON # remove PHP extension and add trailing slash # note - this doesn't work for directories, and throws 404 # TODO - fix so directories use index.php RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{THE_REQUEST} ^GET\ /[^?\s]+\.php RewriteRule (.*)\.php$ /$1/ [R=302,L] RewriteCond %{REQUEST_FILENAME} !-d RewriteRule (.*)/$ /$1.php [L] RewriteCond %{REQUEST_FILENAME}.php -f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule .*[^/]$ /$0/ [R=302,L] </IfModule> # error docs ErrorDocument 404 /errors/404.php </VirtualHost> The problem I'm facing is that when I go to directories on the site, I get a 404 error. So for example, this: devserver:9090/page.php goes to devserver:9090/page/ but going to a directory (that has an index.php): devserver:9090/dir/ throws 404 error page. If I type in devserver:9090/dir/index.php I get devserver:9090/dir/index/ and the contents I want appear... Can anyone help me with my rewrite rules?

  Read the article

• customer wont provide ssh access - ftp only

  - by Max

  Eh, here is my problem: I am working in a webdevelopment agency (thats a problem but not the real problem, read on). Most of the time I choose the live server myself when creating a new website project. But now the customer already has a "server" (10 GB on a cheapo host!) and the "admin" refuses to give me ssh access to it. But I need to access the server via shell because many files will be transported (need to be able to upload and extract a tar) and I need to insert or create mysql dumps via command line. He argues FTP and phpmyadmin should be enough... as far as I know the webspace was just ordered to host the website, so no security critical apps are running there. How can I either convince the admin to give me the ssh login or tell management that we need our own server? Anyone with similiar experiences? This is really annoying as this is a very small project that should be done fast and now one has to fight in order to just get the work done...

  Read the article

• Better urls for this internal web server?

  - by sprugman

  I've got a server that I have admin access to, but don't fully manage. (I think it's a virtual machine, but I'm not 100% sure. It's running Apache on Windows Server 2003.) I share the ip with another user, so my sites all have to use the :8080 port. This is kind of ugly. Also, AFAIK, the only access I have is through an ip address. (I'm inside a corporate firewall and don't think I have access to a DNS server or anything.) I've adjusted my hosts file so I don't have to use the ip address on my local machine, but that's not a very generic solution. Are there any options to 1) get rid of the port requirement 2) be able to use a name (maybe a machine name) instead of the ip address in a generic way? (I'm not really a network admin -- I'm a developer managing this machine. The IT folks who really manage it are a few people away from me and tough to get to do anything, so I'm looking for a light-weight solution if possible.)

  Read the article

• how do i completely delete ask.com from my computer?

  - by celyn

  I have used Final Uninstaller (unregistered version) to remove it. So it removed the toolbar and the things in its folder from C:Program Files/Ask.com except for one thing; remaining are "Ask.com" folder > "Updater" folder > "Updater.exe" I have not checked my registry yet. But if there is something I want it to be gone! As to why I can't delete that updater thing, my laptop asks me permission (says need to be admin) whenever I tried to delete anything from ask.com folder, or its folder at all. I have googled, came to and followed the instructions from "Scott McClenning" in this post. Does not really work. When I say "not really", means, this error message pops up everytime I tried to do that: An error occurred applying attributes to the file: C:/Program Files/Ask.com Access is denied. How can I gain access? I AM the admin for this computer. And... don't ask me to download too many things for my computer, it adds to my frustration. Just in case you are wondering, I got this from FormatFactory when I updated it to 2.70. I should not have done so. Update: Now after I restarted my computer, I got the "EVERYONE" group in and it is under Full Control with every box ticked except for the last one (Special). When I tried to delete that folder and the .exe file, this keeps popping up as i click "try again", only goes away when I click "cancel"

  Read the article

• Windows 7 Account Settings Vanished

  - by Roy Tang

  So I came home and stumbled upon a bit of a mystery. When I got home my brother was using my desktop PC that was running Windows 7 (I have accounts for my 2 brothers and my mom on the machine, but mine is the only admin account). After he finished his game he logged out and I logged in to my account, but found only strangeness. My windows account seems to have been somewhat "reset", meaning: my quick launch shortcuts were gone my dropbox account did not automatically login my pidgin accounts were no longer there I had to relogin Steam iTunes could not launch (I had hooked up my iDevice before logging in) The Documents/Pictures/Music shortcuts in the start menu no longer work However, despite that: my desktop wallpaper was still correct my documents folder was still there in c:\Users\my account name\My Documents as expected Google Chrome settings seem to have been retained other accounts on the same machine seem to be fine I asked my brother if he had installed anything strange during the day, he only installed Yahoo Messenger. I last used the machine around 24 hours ago and it was fine then. I'm not sure what else has been affected. I'm inclined to just create a new admin user for me to use, but I'd like to have some idea of what actually happened.

  Read the article

• Directories Throwing 404 Errors - Virtual Host Configuration and mod_rewrite

  - by nicorellius

  On my production server, things are fine: PHP extension removal and trailing slash rules are in place in my .htaccess file. But locally, this isn't working (well, partially, anyway). I'm running Apache2 with a virtual host for the site in question. I decided to not use the .htaccess file in this case and just add the rules to the httpd-vhosts.conf file instead, which, I've heard, if possible on your server, is a better way to go. The virtual host is working and the URL I use for my site is like this: devserver:9090 Here is my httpd-vhosts.conf file: NameVirtualHost *:9090 # for stuff other than this site <VirtualHost *:9090> ServerAdmin admin@localhost DocumentRoot "/opt/lampstack/apache2/htdocs" ServerName localhost </VirtualHost> # for site in question <VirtualHost *:9090> ServerAdmin admin@localhost DocumentRoot "/opt/lampstack/apache2/htdocs/devserver" ServerName devserver <Directory "/opt/lampstack/apache2/htdocs/devserver"> Options Indexes FollowSymLinks Includes AllowOverride None Order allow,deny Allow from all </Directory> <IfModule rewrite_module> RewriteEngine ON # remove PHP extension and add trailing slash # note - this doesn't work for directories, and throws 404 # TODO - fix so directories use index.php RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{THE_REQUEST} ^GET\ /[^?\s]+\.php RewriteRule (.*)\.php$ /$1/ [R=302,L] RewriteCond %{REQUEST_FILENAME} !-d RewriteRule (.*)/$ /$1.php [L] RewriteCond %{REQUEST_FILENAME}.php -f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule .*[^/]$ /$0/ [R=302,L] </IfModule> # error docs ErrorDocument 404 /errors/404.php </VirtualHost> The problem I'm facing is that when I go to directories on the site, I get a 404 error. So for example, this: devserver:9090/page.php goes to devserver:9090/page/ but going to a directory (that has an index.php): devserver:9090/dir/ throws 404 error page. If I type in devserver:9090/dir/index.php I get devserver:9090/dir/index/ and the contents I want appear... Can anyone help me with my rewrite rules?

  Read the article

• Unwanted blank lines when committing from SVN

  - by Alon_A

  I'm using CentOS Linux 5.8 as a web server and tortoise SVN for synchronizing version of our code. We write the code in Windows 7 professional 64BIT with NetBeans and NotePad++. I'm committing the code files (.php) from the Linux Shell by this command: svn co svnFolder serverFolder --username **** --password **** The problem is, after committing the files, when I'm opening them directly from the server (for debugging) by NotePad++ (I'm doing View/Edit from Filezilla) I have extra blank lines. A code that looks like this on the localhost (On NotePad++): private $producer; private $account; private $admin; private $producerEvents; private $accountProducers; private $adminAccounts; Will look like this after committing to the server (Again, on NotePad++): private $producer; private $account; private $admin; private $producerEvents; private $accountProducers; private $adminAccounts; If I upload files by FTP, No blank lines are being added. How can I solve it ? Thanks.

  Read the article

• Software disables itself when the PC is accessed via RDP

  - by blckgrffn

  We have a large, specialty printer that has vendor specific software that enables its use outside of it showing up simply as a printer in the Windows Control Panel. This software recognizes when we RDP into the machine and "disconnects" the PC from the printer within its proprietary control panel. All is well when an application like TeamViewer is used to access the machine. Ostensibly, the application is helping us be safe by "enforcing" that the machine used for the printer is a walk up workstation, or so the support folks informed me. If TeamViewer etc, fixes the issue, then what is the problem? We have many headless workstations in our warehouse attached to a variety of specialty machines, all used via RDP. We want/need to keep access to the machines the same for the sanity of our production staff. The meat of the question - how, specifically, might a machine know that it is being accessed via RDP (terminal services management???) and how might this be defeated without altering an application or driver. Of note, the system being used is a Windows 7 Pro machine hooked to the printer via USB. Thanks! Nat edit Is there any combination of /admin switches, etc. that will possibly fix this? Simply putting /admin did not.

  Read the article

• .NET Winform AJAX Login Services

  - by AdamSane

  I am working on a Windows Form that connects to a ASP.NET membership database and I am trying to use the AJAX Login Service. No matter what I do I keep on getting 404 errors on the Authentication_JSON_AppService.axd call. Web Config Below <?xml version="1.0"?> <!-- Note: As an alternative to hand editing this file you can use the web admin tool to configure settings for your application. Use the Website->Asp.Net Configuration option in Visual Studio. A full list of settings and comments can be found in machine.config.comments usually located in \Windows\Microsoft.Net\Framework\v2.x\Config --> <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere"/> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <connectionStrings <!-- Removed --> /> <appSettings/> <system.web> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation> <membership defaultProvider="dbSqlMembershipProvider"> <providers> <add name="dbSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="Fire.Common.Properties.Settings.dbFireConnectionString" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression=""/> </providers> </membership> <roleManager enabled="true" defaultProvider="dbSqlRoleProvider"> <providers> <add connectionStringName="Fire.Common.Properties.Settings.dbFireConnectionString" applicationName="/" name="dbSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> </providers> </roleManager> <authentication mode="Forms"> <forms loginUrl="Login.aspx" cookieless="UseCookies" protection="All" timeout="30" requireSSL="false" slidingExpiration="true" defaultUrl="default.aspx" enableCrossAppRedirects="false"/> </authentication> <authorization> <allow users="*"/> <allow users="?"/> </authorization> <customErrors mode="Off"> </customErrors> <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <location path="~/Admin"> <system.web> <authorization> <allow roles="Admin"/> <allow roles="System"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Admin/System"> <system.web> <authorization> <allow roles="System"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Export"> <system.web> <authorization> <allow roles="Export"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Field"> <system.web> <authorization> <allow roles="Field"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Default.aspx"> <system.web> <authorization> <allow roles="Admin"/> <allow roles="System"/> <allow roles="Export"/> <allow roles="Field"/> <deny users="?"/> </authorization> </system.web> </location> <location path="~/Login.aspx"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/App_Themes"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/Includes"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/WebServices"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/Authentication_JSON_AppService.axd"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" type="Microsoft.CSharp.CSharpCodeProvider,System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> <compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="OptionInfer" value="true"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> <!-- The system.webServer section is required for running ASP.NET AJAX under Internet Information Services 7.0. It is not necessary for previous version of IIS. --> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule"/> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory"/> <remove name="ScriptHandlerFactoryAppServices"/> <remove name="ScriptResource"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" verb="GET,HEAD" path="ScriptResource.axd" preCondition="integratedMode" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </handlers> </system.webServer> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> </assemblyBinding> </runtime> </configuration>

  Read the article

• Need help with workflow in Alfresco

  - by Scott Gartner

  Hello SO community, I haven't had any luck getting help in the Alfresco forums, and I'm hoping for more here. We are building an application based on Alfresco and jBPM and I have defined a workflow, but I have either defined it wrong or am missing something or there are bugs in Alfresco integration with jBPM and I need help figuring out which and fixing it. Here is the problem: I have an advanced workflow and I am trying to launch it from JavaScript. Here is the code I'm using to start the workflow: var nodeId = args.nodeid; var document = search.findNode("workspace://SpacesStore/" + nodeId); var workflowAction = actions.create("start-workflow"); workflowAction.parameters.workflowName = "jbpm$nmwf:MyWorkflow"; workflowAction.parameters["bpm:workflowDescription"] = "Please edit: " + document.name; workflowAction.parameters["bpm:assignees"] = [people.getPerson("admin"), people.getPerson("andyg")]; var futureDate = new Date(); futureDate.setDate(futureDate.getDate() + 7); workflowAction.parameters["bpm:workflowDueDate"] = futureDate; workflowAction.execute(document); This runs fine and e-mail sent from the start node's default transition fires just fine. However, when I go looking for the workflow in my task list it is not there, but it is in my completed task list. The default transition (the only transition) from the start node points at a task node which has four transitions. There are 8 tasks and 22 transitions in the workflow. When I use the workflow console to start the workflow and end the start task, it properly follows the default start node transition to the next task. The new task shows up in "show tasks" but does not show up in "show my tasks" (apparently because the task was marked completed for some reason, though it is not in the "end" node). The task is: task id: jbpm$111 , name: nmwf:submitInEditing , properties: 18 If I do "show transitions" it looks just as I would expect: path: jbpm$62-@ , node: In Editing , active: true task id: jbpm$111 , name: nmwf:submitInEditing, title: submitInEditing title , desc: submitInEditing description , properties: 18 transition id: Submit for Approval , title: Submit for Approval transition id: Request Copyediting Review , title: Request Copyediting Review transition id: Request Legal Review , title: Request Legal Review transition id: Request Review , title: Request Review I don't want to post the entire workflow as it's large, but here are the first two nodes: First the swimlanes: <swimlane name="initiator"></swimlane> <swimlane name="Content Providers"> <assignment actor-id="Content Providers"> <actor>#{bpm_assignees}</actor> </assignment> </swimlane> Now the nodes: <start-state name="start"> <task name="nmwf:submitTask" swimlane="initiator"/> <transition name="" to="In Editing"> <action> <runas>admin</runas> <script> /* Code to send e-mail that a new workflow was started. I get this e-mail. */ </script> </action> </transition> </start-state> <task-node name="In Editing"> <task name="nmwf:submitInEditing" swimlane="Content Providers" /> <!-- I put e-mail sending code in each of these transitions, but none are firing. --> <transition to="In Approval" name="Submit for Approval"></transition> <transition to="In Copyediting" name="Request Copyediting Review"></transition> <transition to="In Legal Review" name="Request Legal Review"></transition> <transition to="In Review" name="Request Review"></transition> </task-node> Here is the model for these two nodes: <type name="nmwf:submitTask"> <parent>bpm:startTask</parent> <mandatory-aspects> <aspect>bpm:assignees</aspect> </mandatory-aspects> </type> <type name="nmwf:submitInEditing"> <parent>bpm:workflowTask</parent> <mandatory-aspects> <aspect>bpm:assignees</aspect> </mandatory-aspects> </type> Here is a pseudo-log of running the workflow in the workflow console: :: deploy alfresco/extension/workflow/processdefinition.xml deployed definition id: jbpm$69 , name: jbpm$nmwf:MyWorkflow , title: nmwf:MyWorkflow , version: 28 :: var bpm:assignees* person admin,andyg set var {http://www.alfresco.org/model/bpm/1.0}assignees = [workspace://SpacesStore/73cf1b28-21aa-40ca-9dde-1cff492d0268, workspace://SpacesStore/03297e91-0b89-4db6-b764-5ada2d167424] :: var bpm:package package 1 set var {http://www.alfresco.org/model/bpm/1.0}package = workspace://SpacesStore/6e2bbbbd-b728-4403-be37-dfce55a83641 :: start bpm:assignees bpm:package started workflow id: jbpm$63 , def: nmwf:MyWorkflow path: jbpm$63-@ , node: start , active: true task id: jbpm$112 , name: nmwf:submitTask, title: submitTask title , desc: submitTask description , properties: 16 transition id: [default] , title: Task Done :: show transitions path: jbpm$63-@ , node: start , active: true task id: jbpm$112 , name: nmwf:submitTask, title: submitTask title , desc: submitTask description , properties: 17 transition id: [default] , title: Task Done :: end task jbpm$112 signal sent - path id: jbpm$63-@ path: jbpm$63-@ , node: In Editing , active: true task id: jbpm$113 , name: nmwf:submitInEditing, title: submitInEditing title , desc: submitInEditing description , properties: 17 transition id: Submit for Approval , title: Submit for Approval transition id: Request Copyediting Review , title: Request Copyediting Review transition id: Request Legal Review , title: Request Legal Review transition id: Request Review , title: Request Review :: show tasks task id: jbpm$113 , name: nmwf:submitInEditing , properties: 18 :: show my tasks admin: [there is no output here] I have been making the assumption that the bpm:assignees that I am setting before starting the workflow initially are getting passed to the first task node "In Editing". Clearly the assignees are on the task object and not on the workflow object. I added the assignees aspect to the start-state task so that it could hold them (after I had a problem; initially they were not there) and possibly they are still sitting there, but the start-state has ended before I even get control back from the web script (not that it would help if it wasn't ended, I need it to be in "In Editing" as the start-state is only used to log that the workflow was started). It has always confused me that the properties that I need to set on each task need to be requested before the task is entered (when you choose a transition you must provide the data for the next task before you can actually move to the next task as you have to validate that you have all of the required data first and then signal the transition). However, the code to start the workflow is asynchronous and therefore does not return either the started workflow or the current task (which in my case would be "In Editing"). So, either way you cannot set variables such as bpm:assignees and bpm:dueDate. I wonder if this is the problem with the user task list. I'm setting the assignees in the property list, but maybe those assignees are going to the start-state task and are not getting passed to the "In Editing" task? Note that this is my first jBPM workflow, so please don't assume I know what I'm doing. If you see something that looks off, it probably is and I just don't know it. Thanks in advance for any advice or help,

  Read the article

• sqllite and populating list view, android

  - by Rob Bushway

  I am populating a text and list view from a sqllite database. The data is populating from the cursor correctly (I see the list filling with text rows), but I'm not able to see the actual text in the rows - all I see are empty rows. For the life of me, I can't figure out what I'm not able to see the data in the text rows. My layouts: Tab layout: list layout: row layout: <?xml version="1.0" encoding="utf-8"?> / My topics activity package com.gotquestions.gqapp; import com.gotquestions.gqapp.R.layout; import android.R; import android.app.ListActivity; import android.database.Cursor; import android.database.SQLException; import android.os.Bundle; import android.widget.SimpleCursorAdapter; public class TopicsActivity extends ListActivity { private DataBaseHelper myDbHelper; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); // DataBaseHelper myDbHelper = new DataBaseHelper(this); myDbHelper = new DataBaseHelper(this); //test try { myDbHelper.openDataBase(); }catch(SQLException sqle){ throw sqle; } setContentView(layout.list_layout); Cursor c = myDbHelper.fetchAllTopics(); startManagingCursor(c); String[] from = new String[] { DataBaseHelper.KEY_TITLE }; int[] to = new int[] { R.id.text1 }; // Now create an array adapter and set it to display using our row SimpleCursorAdapter notes = new SimpleCursorAdapter(this, layout.notes_row, c, from, to); setListAdapter(notes); myDbHelper.close(); } } My database helper: package com.gotquestions.gqapp; import java.io.FileOutputStream; import java.io.IOException; import java.io.InputStream; import java.io.OutputStream; import android.content.Context; import android.database.Cursor; import android.database.SQLException; import android.database.sqlite.SQLiteDatabase; import android.database.sqlite.SQLiteException; import android.database.sqlite.SQLiteOpenHelper; import android.util.Log; public class DataBaseHelper extends SQLiteOpenHelper{ //The Android's default system path of your application database. private static String DB_PATH = "/data/data/com.gotquestions.gqapp/databases/"; private static String DB_NAME = "gotquestions_database.mp3"; public static final String KEY_TITLE = "topic_title"; public static final String KEY_ARTICLE_TITLE = "article_title"; public static final String KEY_ROWID = "_id"; private static final String TAG = null; private SQLiteDatabase myDataBase; // private final Context myContext; /** * Constructor * Takes and keeps a reference of the passed context in order to access to the application assets and resources. * @param context */ public DataBaseHelper(Context context) { super(context, DB_NAME, null, 1); this.myContext = context; } /** * Creates a empty database on the system and rewrites it with your own database. * */ public void createDataBase() throws IOException{ boolean dbExist = checkDataBase(); if(dbExist){ //do nothing - database already exist }else{ //By calling this method and empty database will be created into the default system path //of your application so we are gonna be able to overwrite that database with our database. this.getReadableDatabase(); try { copyDataBase(); } catch (IOException e) { throw new Error("Error copying database"); } } } /** * Check if the database already exist to avoid re-copying the file each time you open the application. * @return true if it exists, false if it doesn't */ private boolean checkDataBase(){ SQLiteDatabase checkDB = null; try{ String myPath = DB_PATH + DB_NAME; checkDB = SQLiteDatabase.openDatabase(myPath, null, SQLiteDatabase.OPEN_READONLY); }catch(SQLiteException e){ //database does't exist yet. } if(checkDB != null){ checkDB.close(); } return checkDB != null ? true : false; } /** * Copies your database from your local assets-folder to the just created empty database in the * system folder, from where it can be accessed and handled. * This is done by transfering bytestream. * */ private void copyDataBase() throws IOException{ //Open your local db as the input stream InputStream myInput = myContext.getAssets().open(DB_NAME); // Path to the just created empty db String outFileName = DB_PATH + DB_NAME; //Open the empty db as the output stream OutputStream myOutput = new FileOutputStream(outFileName); //transfer bytes from the inputfile to the outputfile byte[] buffer = new byte[1024]; int length; while ((length = myInput.read(buffer))>0){ myOutput.write(buffer, 0, length); } //Close the streams myOutput.flush(); myOutput.close(); myInput.close(); } public void openDataBase() throws SQLException{ //Open the database String myPath = DB_PATH + DB_NAME; myDataBase = SQLiteDatabase.openDatabase(myPath, null, SQLiteDatabase.OPEN_READONLY); } @Override public synchronized void close() { if(myDataBase != null) myDataBase.close(); super.close(); } @Override public void onCreate(SQLiteDatabase db) { // TODO Auto-generated method stub } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { Log.w(TAG, "Upgrading database from version " + oldVersion + " to " + newVersion + ", which will destroy all old data"); db.execSQL("DROP TABLE IF EXISTS titles"); onCreate(db); } public Cursor getTitle(long rowId) throws SQLException { Cursor mCursor = myDataBase.query(true, "topics", new String[] { KEY_ROWID, KEY_TITLE }, KEY_ROWID + "=" + rowId, null, null, null, null, null); if (mCursor != null) { mCursor.moveToFirst(); } return mCursor; } public Cursor fetchAllTopics() { return myDataBase.query("topics", new String[] {KEY_ROWID, KEY_TITLE}, null, null, null, null, null); }; public Cursor fetchAllFavorites() { return myDataBase.query("articles", new String[] { KEY_ROWID, KEY_ARTICLE_TITLE}, null, null, null, null, null); }; }

  Read the article

• Installing multiple php versions plus extensions on freebsd

  - by jgtumusiime

  I'm a currently learning how to work with freebsd. Lately I have been trying to run multiple php versions along with their respective packages. However, I seem to be running into issues while making installations. The default location for my php installation is /usr/local/etc/, however I want to be able to install php5.2, php5.3 and php5.4 in /usr/local/etc/php52, /usr/local/etc/php53 and /usr/local/etc/php54 respectively. Using ports I simply achieved this by doing cd /usr/ports/lang/php5x && make PREFIX="/usr/local/etc/php5x" install clean. The problem now is: How do I do the same for extensions of all my PHP versions? When I try installing php-extensions like so: cd /usr/ports/lang/php5x-extension && make PREFIX="/usr/local/etc/php5x/lib/php" install clean, I get this error ... ===> PHPizing for php53-bcmath-5.3.17 env: /usr/local/bin/phpize: No such file or directory *** Error code 127 Stop in /usr/ports/math/php53-bcmath. *** Error code 1 Stop in /usr/ports/lang/php53-extensions. My PHPize is located in /usr/local/etc/php5x/bin/phpize So how do I get make or whatever to look for phpize in the right path? Is there a cleaner, may be simpler way of maintaining multiple php installations? I need to achieve this because of compatibility issues from some legacy code that runs on 5.2 and breaks on 5.3. Thank you. ================= So I successfully installed an configured freebsd jail and I would like to install software within my jail but I cannot connect to the network. Here is my rc.conf jail_enable="YES" # Set to NO to disable starting of any jails jail_list="mambo2" # Space separated list of names of jails jail_mambo2_rootdir="/usr/jails/j01" # jail's root directory jail_mambo2_hostname="mambo2.ug" # jail's hostname jail_mambo2_ip="192.168.100.174" # jail's IP address jail_mambo2_devfs_enable="YES" # mount devfs in the jail jail_mambo2_devfs_ruleset="mambo2_ruleset" # devfs ruleset to apply to jail here is my jail ifconfig output mambo2# ifconfig rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:c1:28:00:48:db media: Ethernet autoselect (100baseTX <full-duplex>) status: active plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 mambo2# I created a /etc/resolv.conf for nameservers mambo2# cat /etc/resolv.conf nameserver 192.168.100.251 nameserver 8.8.8.8 mambo2# Here is a list of jails running [root@mambo /usr/home/jtumusiime]# jls JID IP Address Hostname Path 5 192.168.100.174 mambo2.ug /usr/jails/j01 my host has 4 ip addresses, 3 public and one private: 192.168.100.173 I tried creating a jail using ezjail and this does not work out. [root@mambo /usr/home/jtumusiime]# ezjail-admin update -p -i Error: Cannot find your copy of the FreeBSD source tree in . Consider using 'ezjail-admin install' to create the base jail from an ftp server. [root@mambo /usr/home/jtumusiime]# I have an updated copy of freebsd 7.1 source in /usr/src/ and I did #make buildworld while building the first jail mambo2 Here is an excerpt of ouput of ezjail-admin install ... 221 Goodbye. Trying 193.162.146.4... Connected to ftp.freebsd.org. 220 ftp.beastie.tdk.net FTP server (Version 6.00LS) ready. 331 Guest login ok, send your email address as password. 230 Guest login ok, access restrictions apply. Remote system type is UNIX. Using binary mode to transfer files. 200 Type set to I. 550 pub/FreeBSD-Archive/old-releases/i386/7.1-RELEASE/base: No such file or directory. 221 Goodbye. Could not fetch base from ftp.freebsd.org. Maybe your release (7.1-RELEASE) is specified incorrectly or the host ftp.freebsd.org does not provide that release build. Use the -r option to specify an existing release or the -h option to specify an alternative ftp server. Querying your ftp-server... The ftp server you specified (ftp.freebsd.org) seems to provide the following builds: Trying 193.162.146.4... total 10 drwxrwxr-x 13 1006 1006 512 Feb 20 2011 8.2-RELEASE drwxrwxr-x 13 1006 1006 512 Apr 10 2012 8.3-RELEASE lrwxr-xr-x 1 1006 1006 16 Jan 7 2012 9.0-RELEASE -> i386/9.0-RELEASE drwxrwxr-x 7 1006 1006 1024 Feb 19 2012 ISO-IMAGES -rw-rw-r-- 1 1006 1006 637 Nov 23 2005 README.TXT drwxrwxr-x 5 1006 1006 512 Nov 2 02:59 i386 I do not want to upgrade my freebsd installation. I have googled around; but all on vail

  Read the article

• Rails on server syntax error?

  - by Danny McClelland

  Hi Everyone, I am trying to get my rails application running on my web server, but when I run the rake db:migrate I get the following error: r oot@oak [/home/macandco/rails_apps/survey_manager]# rake db:migrate (in /home/macandco/rails_apps/survey_manager) == Baseapp: migrating ======================================================== -- create_table(:settings, {:force=>true}) -> 0.0072s -- create_table(:users) -> 0.0072s -- add_index(:users, :login, {:unique=>true}) -> 0.0097s -- create_table(:profiles) -> 0.0084s -- create_table(:open_id_authentication_associations, {:force=>true}) -> 0.0067s -- create_table(:open_id_authentication_nonces, {:force=>true}) -> 0.0064s -- create_table(:roles) -> 0.0052s -- create_table(:roles_users, {:id=>false}) -> 0.0060s rake aborted! An error has occurred, all later migrations canceled: 555 5.5.2 Syntax error. g9sm2526951gvc.8 Has anyone come across this before? Thanks, Danny Main Migration file c lass Baseapp < ActiveRecord::Migration def self.up # Create Settings Table create_table :settings, :force => true do |t| t.string :label t.string :identifier t.text :description t.string :field_type, :default => 'string' t.text :value t.timestamps end # Create Users Table create_table :users do |t| t.string :login, :limit => 40 t.string :identity_url t.string :name, :limit => 100, :default => '', :null => true t.string :email, :limit => 100 t.string :mobile t.string :signaturenotes t.string :crypted_password, :limit => 40 t.string :salt, :limit => 40 t.string :remember_token, :limit => 40 t.string :activation_code, :limit => 40 t.string :state, :null => :false, :default => 'passive' t.datetime :remember_token_expires_at t.string :password_reset_code, :default => nil t.datetime :activated_at t.datetime :deleted_at t.timestamps end add_index :users, :login, :unique => true # Create Profile Table create_table :profiles do |t| t.references :user t.string :real_name t.string :location t.string :website t.string :mobile t.timestamps end # Create OpenID Tables create_table :open_id_authentication_associations, :force => true do |t| t.integer :issued, :lifetime t.string :handle, :assoc_type t.binary :server_url, :secret end create_table :open_id_authentication_nonces, :force => true do |t| t.integer :timestamp, :null => false t.string :server_url, :null => true t.string :salt, :null => false end create_table :roles do |t| t.column :name, :string end # generate the join table create_table :roles_users, :id => false do |t| t.column :role_id, :integer t.column :user_id, :integer end # Create admin role and user admin_role = Role.create(:name => 'admin') user = User.create do |u| u.login = 'admin' u.password = u.password_confirmation = 'advices' u.email = '[email protected]' end user.register! user.activate! user.roles << admin_role end def self.down # Drop all BaseApp drop_table :settings drop_table :users drop_table :profiles drop_table :open_id_authentication_associations drop_table :open_id_authentication_nonces drop_table :roles drop_table :roles_users end end

  Read the article

• Should we hire someone who writes C in Perl?

  - by paxdiablo

  One of my colleagues recently interviewed some candidates for a job and one said they had very good Perl experience. Since my colleague didn't know Perl, he asked me for a critique of some code written (off-site) by that potential hire, so I had a look and told him my concerns (the main one was that it originally had no comments and it's not like we gave them enough time). However, the code works so I'm loathe to say no-go without some more input. Another concern is that this code basically looks exactly how I'd code it in C. It's been a while since I did Perl (and I didn't do a lot, I'm more a Python bod for quick scripts) but I seem to recall that it was a much more expressive language than what this guy used. I'm looking for input from real Perl coders, and suggestions for how it could be improved (and why a Perl coder should know that method of improvement). You can also wax lyrical about whether people who write one language in a totally different language should (or shouldn't be hired). I'm interested in your arguments but this question is primarily for a critique of the code. The spec was to successfully process a CSV file as follows and output the individual fields: User ID,Name , Level,Numeric ID pax, Pax Morgan ,admin,0 gt," Turner, George" rubbish,user,1 ms,"Mark \"X-Men\" Spencer","guest user",2 ab,, "user","3" The output was to be something like this (the potential hire's code actually output this): User ID,Name , Level,Numeric ID: [User ID] [Name] [Level] [Numeric ID] pax, Pax Morgan ,admin,0: [pax] [Pax Morgan] [admin] [0] gt," Turner, George " rubbish,user,1: [gt] [ Turner, George ] [user] [1] ms,"Mark \"X-Men\" Spencer","guest user",2: [ms] [Mark "X-Men" Spencer] [guest user] [2] ab,, "user","3": [ab] [] [user] [3] Here is the code they submitted: #!/usr/bin/perl # Open file. open (IN, "qq.in") || die "Cannot open qq.in"; # Process every line. while (<IN>) { chomp; $line = $_; print "$line:\n"; # Process every field in line. while ($line ne "") { # Skip spaces and start with empty field. if (substr ($line,0,1) eq " ") { $line = substr ($line,1); next; } $field = ""; $minlen = 0; # Detect quoted field or otherwise. if (substr ($line,0,1) eq "\"") { $line = substr ($line,1); $pastquote = 0; while ($line ne "") { # Special handling for quotes (\\ and \"). if (length ($line) >= 2) { if (substr ($line,0,2) eq "\\\"") { $field = $field . "\""; $line = substr ($line,2); next; } if (substr ($line,0,2) eq "\\\\") { $field = $field . "\\"; $line = substr ($line,2); next; } } # Detect closing quote. if (($pastquote == 0) && (substr ($line,0,1) eq "\"")) { $pastquote = 1; $line = substr ($line,1); $minlen = length ($field); next; } # Only worry about comma if past closing quote. if (($pastquote == 1) && (substr ($line,0,1) eq ",")) { $line = substr ($line,1); last; } $field = $field . substr ($line,0,1); $line = substr ($line,1); } } else { while ($line ne "") { if (substr ($line,0,1) eq ",") { $line = substr ($line,1); last; } if ($pastquote == 0) { $field = $field . substr ($line,0,1); } $line = substr ($line,1); } } # Strip trailing space. while ($field ne "") { if (length ($field) == $minlen) { last; } if (substr ($field,length ($field)-1,1) eq " ") { $field = substr ($field,0, length ($field)-1); next; } last; } print " [$field]\n"; } } close (IN);

  Read the article

• Redirect local service to custom proxy

  - by Pedro Laguna

  Hello, I'm trying to create a custom proxy program but I have a problem. My program connects to a fixed port from a random port and I need to tunnel all this traffic by my local proxy. I think the solution is using iptables, but all the topics I found are related to redirect incoming connections, not outbounds. How can I redirect all the traffic from a local port to another local port and later to the internet? Thanks,

  Read the article

• Can't configure PAM + LDAP on Debian Lenny - Getting error=49 on server logs

  - by Jorge Suárez de Lis

  I've been migrating some servers and desktops using Ubuntu 10.04 from getting the users from an old OpenLDAP implementation to a newer Centos Active Directory. I haven't had any problems so far, until I reached a Debian Lenny server. I've set up the server as the others, setting /etc/ldap.conf and /etc/ldap/ldap.conf. However, when I issue "getent passwd", I get nothing from the LDAP server. Reading the pam_ldap manpage, I realized that /etc/ldap.conf was not an accepted file by pam_ldap -it worked with Ubuntu though-, so I renamed it to /etc/pam_ldap.conf. Same result. However, once I've changed the name of this file, when I login using SSH I get this on the LDAP server logs: [20/Jul/2012:11:19:40 +0200] conn=16501 fd=155 slot=155 connection from x.x.x.50 to 10.1.176.237 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 RESULT err=49 tag=97 nentries=0 etime=0 The password isn't working. I don't know that could be wrong, anything else seems to be OK. That user/password is working from another clients: [20/Jul/2012:11:29:39 +0200] conn=16528 fd=188 slot=188 connection from x.x.x.224 to 10.1.176.237 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=jorge.suarez,ou=people,ou=citius,dc=inv,dc=usc,dc=es" I'm using SSHA for storing passwords on the LDAP server. Maybe this is not supported by Debian Lenny? On pam_ldap.conf, I've set up this, as in all the other servers: # Do not hash the password at all; presume # the directory server will do it, if # necessary. This is the default. pam_password md5 Also tried clear, but it didn't work. Anyways, it's weird that issuing getent passwd still gets me no users. However, if I use pamtest from the package libpam-dotfile to test login, it works. # pamtest ssh jorge.suarez Trying to authenticate <jorge.suarez> for service <ssh>. Password: Authentication successful. # pamtest foo jorge.suarez Trying to authenticate <jorge.suarez> for service <foo>. Password: Authentication successful. But "su" won't work also: # su jorge.suarez Id. descoñecido: jorge.suarez Just the output from getent passwd : # getent passwd root:x:0:0:root:/root:/bin/bash daemon:x:1:1:daemon:/usr/sbin:/bin/sh bin:x:2:2:bin:/bin:/bin/sh sys:x:3:3:sys:/dev:/bin/sh sync:x:4:65534:sync:/bin:/bin/sync games:x:5:60:games:/usr/games:/bin/sh man:x:6:12:man:/var/cache/man:/bin/sh lp:x:7:7:lp:/var/spool/lpd:/bin/sh mail:x:8:8:mail:/var/mail:/bin/sh news:x:9:9:news:/var/spool/news:/bin/sh uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh proxy:x:13:13:proxy:/bin:/bin/sh www-data:x:33:33:www-data:/var/www:/bin/sh backup:x:34:34:backup:/var/backups:/bin/sh list:x:38:38:Mailing List Manager:/var/list:/bin/sh irc:x:39:39:ircd:/var/run/ircd:/bin/sh gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh nobody:x:65534:65534:nobody:/nonexistent:/bin/sh libuuid:x:100:101::/var/lib/libuuid:/bin/sh Debian-exim:x:101:103::/var/spool/exim4:/bin/false statd:x:102:65534::/var/lib/nfs:/bin/false sshd:x:104:65534::/var/run/sshd:/usr/sbin/nologin luser:x:1000:1000:Usuario local de Burdeos,,,:/home/luser:/bin/bash messagebus:x:105:107::/var/run/dbus:/bin/false sge-admin:x:1001:1001:Administrador do SGE,,,:/home/cluster/sge-admin:/bin/bash ntp:x:107:110::/home/ntp:/bin/false haldaemon:x:108:111:Hardware abstraction layer,,,:/var/run/hald:/bin/false vde2-net:x:109:114::/var/run/vde2:/bin/false uml-net:x:110:115::/home/uml-net:/bin/false polkituser:x:111:116:PolicyKit,,,:/var/run/PolicyKit:/bin/false Debian-pxe:x:113:65534:Dummy user for Debian pxe package,,,:/home/Debian-pxe:/bin/false Nscd was stopped from the beginning.

  Read the article

• How to do URL authentication in struts2

  - by Enrique Malhotra

  Hi, I am using struts2.1.6 + Spring 2.5 I have four modules in my application. Registration Module Admin Module Quote Module Location Module. In registration module the customer can register himself and only after registering he is supposed to have access of the remaining three modules. I want to implement something like if the action being called belongs to the registration module it will work as normal but if the action being called belongs to the rest of those three modules it first should check if the user is logged-in and session has not timed-out. if yes it should proceed normally otherwise it should redirect to the login page. Through research I have found out that interceptors could be used for this purpose but before proceeding I thought its better to get some feedback on it from experts. Please suggest how it should be done and If possible put some code suggestions. Here is my struts.xml file(The struts.xml contains four different config files belonging to each module): <struts> <include file="struts-default.xml" /> <constant name="struts.i18n.reload" value="false" /> <constant name="struts.objectFactory" value="spring" /> <constant name="struts.devMode" value="false" /> <constant name="struts.serve.static.browserCache" value="false" /> <constant name="struts.enable.DynamicMethodInvocation" value="true" /> <constant name="struts.multipart.maxSize" value="10000000" /> <constant name="struts.multipart.saveDir" value="C:/Temporary_image_location" /> <include file="/com/action/mappingFiles/registration_config.xml" /> <include file="/com/action/mappingFiles/admin_config.xml" /> <include file="/com/action/mappingFiles/quote.xml" /> <include file="/com/action/mappingFiles/location_config.xml" /> </struts> The sample registration_config.xml file is: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE struts PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 2.0//EN" "http://struts.apache.org/dtds/struts-2.0.dtd"> <struts> <package name="registration" extends="struts-default" namespace="/my_company"> <action name="LoginView" class="registration" method="showLoginView"> <result>....</result> <result name="input">...</result> </action> </package> </struts> The sample admin_config.xml file is: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE struts PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 2.0//EN" "http://struts.apache.org/dtds/struts-2.0.dtd"> <struts> <package name="admin" extends="struts-default" namespace="/my_company"> <action name="viewAdmin" class="admin" method="showAdminView"> <result>....</result> <result name="input">...</result> </action> </package> </struts> Same code is there in the rest of two struts2 xml config files. I have used the same namespace in all the four config files with the different package names(As you can see)

  Read the article

• Linux server apache httpd processes take i/o wait to close to 100% and lock down server

  - by user3682065

  For about 5 days now, and seemingly out of the blue, my linux server has started locking up from time to time. The pattern is always the same as far as I can tell from top and iotop commands around the time it starts happening: One or more httpd processes (usually one) hang and start using up 100% of CPU power, the %wa goes close to 100% and in the iotop I see several httpd processes with 99.99% in the IO column. I'm also running an SVN server on this machine through apache and the one way that I've been consistently able to reproduce this is to do an SVN commit of new files or an SVN update from the repository on this server (I am the only one using this SVN repository). This will always reproduce this scenario successfully, but until very recently I had no problems at all checking in/out of SVN. But sometimes it just happens for no detectable reason at all it seems. So it seems like there is some issue with my Apache that leads it to have processes use up a lot of read/write upon certain triggers. I was wondering if anyone could help me uncover that issue. EDIT: OK now it's happening again: This is top: [root@server ~]# top top - 10:56:54 up 2:59, 5 users, load average: 171.46, 70.35, 27.01 Tasks: 328 total, 2 running, 326 sleeping, 0 stopped, 0 zombie Cpu(s): 1.9%us, 2.0%sy, 0.0%ni, 0.0%id, 96.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2021144k total, 1968192k used, 52952k free, 2500k buffers Swap: 4194288k total, 2938584k used, 1255704k free, 39008k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10390 apache 20 0 2774m 936m 6200 D 2.0 47.4 1:52.27 httpd 2149 root 20 0 927m 13m 1040 S 0.7 0.7 1:50.46 namecoind 11 root 20 0 0 0 0 R 0.3 0.0 0:30.10 events/0 23 root 20 0 0 0 0 S 0.3 0.0 0:17.88 kblockd/1 2049 root 20 0 382m 4932 2880 D 0.3 0.2 0:03.67 httpd 2144 root 20 0 1702m 69m 1164 S 0.3 3.5 5:19.68 bitcoind 6325 root 20 0 15164 1100 656 R 0.3 0.1 0:11.09 top 10311 apache 20 0 387m 9496 7320 D 0.3 0.5 0:01.89 httpd 10313 apache 20 0 391m 10m 7364 D 0.3 0.5 0:02.40 httpd 10466 apache 20 0 399m 12m 7392 D 0.3 0.7 0:02.41 httpd 10599 apache 20 0 391m 9324 7340 D 0.3 0.5 0:00.15 httpd 10628 apache 20 0 384m 7620 4052 D 0.3 0.4 0:00.01 httpd 10633 apache 20 0 384m 7048 3504 D 0.3 0.3 0:00.01 httpd 10634 apache 20 0 384m 8012 4048 D 0.3 0.4 0:00.02 httpd 10638 apache 20 0 400m 22m 9.8m D 0.3 1.1 0:01.93 httpd 10640 apache 20 0 385m 8288 4028 D 0.3 0.4 0:00.03 httpd 10641 apache 20 0 401m 21m 6376 D 0.3 1.1 0:01.45 httpd 10759 apache 20 0 385m 8816 3480 D 0.3 0.4 0:01.45 httpd 10773 apache 20 0 384m 8044 3464 D 0.3 0.4 0:00.02 httpd This is an iotop snapshot: Total DISK READ: 5.93 M/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 10732 be/4 apache 3.76 K/s 0.00 B/s 0.00 % 58.48 % httpd 876 be/3 root 0.00 B/s 52.68 K/s 0.00 % 52.98 % [jbd2/dm-1-8] 10906 be/4 root 124.17 K/s 0.00 B/s 0.00 % 23.03 % sh -c [ -x /usr/local/psa/admin/sbin/backupmng ] && /usr/local/psa/admin/sbin/backupmng >/dev/null 2>&1 2156 be/4 root 206.94 K/s 0.00 B/s 0.00 % 21.15 % bitcoind 10904 be/4 mysql 0.00 B/s 0.00 B/s 0.00 % 18.94 % mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --log-error=/var/log/mysqld.log --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/lib/mysql/mysql.sock 10773 be/4 apache 7.53 K/s 0.00 B/s 0.00 % 14.77 % httpd 10641 be/4 apache 15.05 K/s 0.00 B/s 0.00 % 11.57 % httpd 10399 be/4 apache 1057.29 K/s 0.00 B/s 43.16 % 10.56 % httpd 10682 be/4 sw-cp-se 158.03 K/s 0.00 B/s 0.00 % 7.45 % sw-engine-cgi -c /usr/local/psa/admin/conf/php.ini -d auto_prepend_file=auth.php3 -u psaadm 10774 be/4 apache 3.76 K/s 0.00 B/s 0.00 % 6.53 % httpd 10624 be/4 apache 0.00 B/s 0.00 B/s 0.00 % 5.53 % httpd 10356 be/4 apache 899.26 K/s 0.00 B/s 35.52 % 4.01 % httpd 10795 be/4 apache 0.00 B/s 0.00 B/s 0.00 % 3.93 % httpd 10804 be/4 apache 7.53 K/s 0.00 B/s 0.00 % 3.08 % httpd 4379 be/4 root 2.89 M/s 0.00 B/s 99.99 % 0.00 % namecoind 10619 be/4 apache 462.80 K/s 0.00 B/s 7.80 % 0.00 % httpd 10636 be/4 apache 3.76 K/s 0.00 B/s 0.00 % 0.00 % httpd 10716 be/4 mysql 105.35 K/s 0.00 B/s 5.92 % 0.00 % mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --log-error=/var/log/mysqld.log --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/lib/mysql/mysql.sock 1988 be/4 root 18.81 K/s 0.00 B/s 0.00 % 0.00 % spamd_full.sock I also ran lsof -p for pid 10390 which was way up top under the top command and this is the bottom line where I can sort of see what request this was and it says CLOSE_WAIT: httpd 10390 apache 34u IPv6 315879 0t0 TCP default-domain.com:https->crawl-66-249-65-91.googlebot.com:42907 (CLOSE_WAIT) I'm still not sure what exactly is causing this all to happen though? I killed that service but %wa and load average remain high, I also stopped mysqld and other services. It really only goes down once I stop httpd altogether, and even then I can't start it without finding remaining hanging httpd processes via "netstat -tulpn", killing those or doing "killall -9 httpd" and after waiting a while for it to cycle through all those then doing /etc/init.d/httpd start

  Read the article

• Is this PHP/MySQL login script secure?

  - by NightMICU

  Greetings, A site I designed was compromised today, working on damage control at the moment. Two user accounts, including the primary administrator, were accessed without authorization. Please take a look at the log-in script that was in use, any insight on security holes would be appreciated. I am not sure if this was an SQL injection or possibly breach on a computer that had been used to access this area in the past. Thanks <?php //Start session session_start(); //Include DB config require_once('config.php'); //Error message array $errmsg_arr = array(); $errflag = false; //Connect to mysql server $link = mysql_connect(DB_HOST, DB_USER, DB_PASSWORD); if(!$link) { die('Failed to connect to server: ' . mysql_error()); } //Select database $db = mysql_select_db(DB_DATABASE); if(!$db) { die("Unable to select database"); } //Function to sanitize values received from the form. Prevents SQL injection function clean($str) { $str = @trim($str); if(get_magic_quotes_gpc()) { $str = stripslashes($str); } return mysql_real_escape_string($str); } //Sanitize the POST values $login = clean($_POST['login']); $password = clean($_POST['password']); //Input Validations if($login == '') { $errmsg_arr[] = 'Login ID missing'; $errflag = true; } if($password == '') { $errmsg_arr[] = 'Password missing'; $errflag = true; } //If there are input validations, redirect back to the login form if($errflag) { $_SESSION['ERRMSG_ARR'] = $errmsg_arr; session_write_close(); header("location: http://tapp-essexvfd.org/admin/index.php"); exit(); } //Create query $qry="SELECT * FROM user_control WHERE username='$login' AND password='".md5($_POST['password'])."'"; $result=mysql_query($qry); //Check whether the query was successful or not if($result) { if(mysql_num_rows($result) == 1) { //Login Successful session_regenerate_id(); //Collect details about user and assign session details $member = mysql_fetch_assoc($result); $_SESSION['SESS_MEMBER_ID'] = $member['user_id']; $_SESSION['SESS_USERNAME'] = $member['username']; $_SESSION['SESS_FIRST_NAME'] = $member['name_f']; $_SESSION['SESS_LAST_NAME'] = $member['name_l']; $_SESSION['SESS_STATUS'] = $member['status']; $_SESSION['SESS_LEVEL'] = $member['level']; //Get Last Login $_SESSION['SESS_LAST_LOGIN'] = $member['lastLogin']; //Set Last Login info $qry = "UPDATE user_control SET lastLogin = DATE_ADD(NOW(), INTERVAL 1 HOUR) WHERE user_id = $member[user_id]"; $login = mysql_query($qry) or die(mysql_error()); session_write_close(); if ($member['level'] != "3" || $member['status'] == "Suspended") { header("location: http://members.tapp-essexvfd.org"); //CHANGE!!! } else { header("location: http://tapp-essexvfd.org/admin/admin_main.php"); } exit(); }else { //Login failed header("location: http://tapp-essexvfd.org/admin/index.php"); exit(); } }else { die("Query failed"); } ?>

  Read the article

• Wireless internet connection connects but internet does not work (no packets received). Wired does.

  - by Rodney

  When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

  Read the article

• windows http tunnel trough 2 linux hosts?

  - by Darkmage

  the localhost only have connection to host1, Host1 have connetion to Host2 and localhost, how can i setup this to use host2 as a proxy for web trafic from localhost. i have seen similar topics but cant get it to work. how do i set it up on the XP client?

  Read the article

• Ruby on rails model and controllers inside of different namespaces

  - by Nelson LaQuet

  OK. This is insane. I'm new to RoR and I really want to get into it as everything about it that I have seen so far makes it more appealing to the type of work that I do. However, I can't seem to accomplish a very simple thing with RoR. I want these controlers: /admin/blog/entries (index/show/edit/delete) /admin/blog/categories (index/show/edit/delete) /admin/blog/comments (index/show/edit/delete) ... and so on And these models: Blog::Entry (table: blog_entries) Blog::Category (table: blog_categories) Blog::Comments (table: blog_comments) ... and so on Now, I have already gone though quite a bit of misery to make this work. My first attempt was with generating scaffolding (I'm using 2.2.2). I generated my scaffolding, but had to move my model, then fix the references to the model in my controller (see http://stackoverflow.com/questions/903258/ruby-on-rails-model-inside-namespace-cant-be-found-in-controller). That is already a big of a pain, but hey, I got it to work. Now though form_for won't work and I cannot figure out how to use the url helpers (I have no idea what these are called... they are the automatically generated methods that return URLs to controllers associated with a model). I cannot figure out what their name is. My model is Blog::Entries. I have tried to mess with the route.rb's map's resource method, but no luck. When I attempt to use form_for with my model, I get this error undefined method `blog_entries_path' for #<ActionView::Base:0xb6848080> Now. This is really quite frustrating. I am not going to completely destroy my code's organization in order to use this framework, and if I cannot figure out how to accomplish this simple task (I have been researching this for at least 5 hours) then I simply cannot continue. Are there any ideas on how to accomplish this? Thanks EDIT Here are my routes: admin_blog_entries GET /admin_blog_entries {:controller=>"admin_blog_entries", :action=>"index"} formatted_admin_blog_entries GET /admin_blog_entries.:format {:controller=>"admin_blog_entries", :action=>"index"} POST /admin_blog_entries {:controller=>"admin_blog_entries", :action=>"create"} POST /admin_blog_entries.:format {:controller=>"admin_blog_entries", :action=>"create"} new_admin_blog_entry GET /admin_blog_entries/new {:controller=>"admin_blog_entries", :action=>"new"} formatted_new_admin_blog_entry GET /admin_blog_entries/new.:format {:controller=>"admin_blog_entries", :action=>"new"} edit_admin_blog_entry GET /admin_blog_entries/:id/edit {:controller=>"admin_blog_entries", :action=>"edit"} formatted_edit_admin_blog_entry GET /admin_blog_entries/:id/edit.:format {:controller=>"admin_blog_entries", :action=>"edit"} admin_blog_entry GET /admin_blog_entries/:id {:controller=>"admin_blog_entries", :action=>"show"} formatted_admin_blog_entry GET /admin_blog_entries/:id.:format {:controller=>"admin_blog_entries", :action=>"show"} PUT /admin_blog_entries/:id {:controller=>"admin_blog_entries", :action=>"update"} PUT /admin_blog_entries/:id.:format {:controller=>"admin_blog_entries", :action=>"update"} DELETE /admin_blog_entries/:id {:controller=>"admin_blog_entries", :action=>"destroy"} DELE

  Read the article

• Windows HTTP tunnel through 2 Linux hosts?

  - by Darkmage

  The localhost only has connection to Host1. Host1 has connection to Host2 and localhost. How can I setup this to use Host2 as a proxy for web trafic from localhost? I have seen similar topics but can't get it to work. How do I set it up on the Windows XP client?

  Read the article

• Reading Usenet w/o Spam

  - by user36720

  I'm trying to read comp.lang.javascript. The group seems to be active with decent content, but there is so much spam in there. Currently I'm reading it via Google Groups (http://groups.google.com/group/comp.lang.javascript/topics). Is there a way to read this group without the spam?

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >