small jam - Page 110 - Developer IT

Create a virtual serial port for widcomm stack under 32feet

- by i13m

Hi, all Currently I am doing a project involves a bluetooth communication setup between a PDA and a small embedded device. This small embedded device can only be communicated with a virtual serial port over a bluetooth link. The PDA is the ipaq running with windows mobile 6, and I am using c#. I had done a program which can communication with the serial port over bluetooth. But the only issue is every time I run this program, I have to active the bluetooth radio, and manually pairing this device with the pda via the bluetooth manager. What I want to do is when running this program, it can establish the bluetooth connection between the pda and the embedded module. So I am using functions from the 32feet prject. This is one issue is I cant make the virutal serial port part, as I think the 32feet project can only make virual serial ports for the window bluetooth stack but not the widcomm bluetooth stact, which the ipaq is using. Therefore, are there any existing c# classes or stacks that can make virtual serial port under widcomm for windows mobile 6. Thanks

Read the article

Multiple sendto() using UDP socket

- by ereOn

Hi, I have a network software which uses UDP to communicate with other instances of the same program. For different reasons, I must use UDP here. I recently had problems sending huge ammounts of data over UDP and had to implement a fragmentation system to split my messages into small data chunks. So far, it worked well but I now encounter an issue when I have to send a lot of data chunks. I have the following algorithm: Split message into small data chunks (around 1500 bytes) Iterate over the data chunks list and for each, send it using sendto() However, when I send a lot of data chunks, the receiver only gets the first 6 messages. Sometimes it misses the sixth and receives the seventh. It depends. Anyway, sendto() always indicates success. This always happen when I test my software over a loopback interface (127.0.0.1) but never over my LAN network. If I add something like std::cout << "test" << std::endl; between the sendto() then every frame is received. I am aware that UDP allows packet loss and that my frames might be loss for a lot of reasons and I suppose it has to do with the rate I am sending the data chunks at. What would be the right approach here ? Implementing some acknowledgement mechanism (just like TCP) seems overkill. Adding some arbitrary waiting time between the sendto() is ugly and will probably decrease performance. Increasing (if possible) the receiver UDP internal buffer ? I don't even know if this is possible. Something else ? I really need your advices here. Thank very much.

Read the article

javasript function

- by user289346

Read the article

jQuery AJAX call not working in Webkit

- by Brian

I've run into a strange issue with Webkit based browsers (both Safari and Chrome - I'm testing on a Mac) and I am not sure what is causing it. Here's a small script I've created that replicates the issue: <html> <head> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js"></script> <script type="text/javascript" language="javascript"> function doRequest() { document.test.submit(); $.ajax({ type: "GET", cache: false, url: 'ajax.php?tmp=1', success: doSuccess }); } function doSuccess(t_data,t_status,req) { alert('Data is: '+ t_data +', XMLHTTPRequest status is: '+ req.status); } </script> </head> <body> <form name="test" method="post" action="ajax.html" enctype="multipart/form-data"> <input type="file" name="file_1"> <br><input type="button" value="upload" onclick="doRequest();"> </form> </body> </html> ajax.php is: <?php echo $_REQUEST['tmp']; ?> This works as is on Firefox, but the XMLHTTPRequest status is always "0" on both Safari and Chrome. If I remove this line: document.test.submit(); then it works, but of course the form is not submitted. I've tried changing the form submit button from "button" to "submit", but that also prevents it from working on Safari or Chrome. What I am trying to accomplish is: submit the form call another script to get status on the file being uploaded via the form (it's for a small upload progress meter). Any help is really appreciated - I'm hopeful it is just a quirk I'm not familiar with. Thanks! Brian

Read the article

PHP Localization Best Practices? gettext?

- by nute

We are in the process of making our website international, allowing multiple languages. I've looked into php's "gettext" however, if I understand it right, I see a big flaw: If my webpage has let's say "Hello World" as a static text. I can put the string as <?php echo gettext("Hello World"); ?>, generate the po/mo files using a tool. Then I would give the file to a translator to work on. A few days later we want to change the text in English to say "Hello Small World"? Do I change the value in gettext? Do I create an english PO file and change it there? If you change the gettext it will consider it as a new string and you'll instantly loose the current translation ... It seems to me that gradually, the content of the php file will have old text everywhere. Or people translating might have to be told "when you see Hello World, instead, translate Hello Small World". I don't know I'm getting confused. In other programming languages, I've seen that they use keywords such as web.home.featured.HelloWorld. What is the best way to handle translations in PHP? Thanks

Read the article

C# winforms: graphics.DrawImage problem

- by Tony

Hi, I have a really strange problem with Graphics.DrawImage method. I have the PictureBox control in the Panel control with AllowScroll property = true. The program cuts the image on small parts basing on the area selected by the user. I load the image 300x547 and select the area (the red rectangle): program properly cuts the image: then, I load another image 427x640: and then, as the result I see that the image is not cut properly. Each img.jpg file has properly width & height but the drawn image is too small: here's the code snippet - it saves the bitmap area selected by the user: Bitmap bmp = new Bitmap(selectedAreaRECT.Width, selectedAreaRECT.Height); Graphics g = Graphics.FromImage(bmp); g.DrawImage(OriginalIMG, 0,0, selectedAreaRECT, GraphicsUnit.Pixel); g.Save(); g.Dispose(); bmp.Save(AppDomain.CurrentDomain.BaseDirectory + @"\Temp\" + "img1.jpg", System.Drawing.Imaging.ImageFormat.Jpeg); As You see, the code is the same for the img1.jpg from image A and from Image B. I'm trying to resolve that stupid problem for too long, I don't know what's the reason of that problem. I tried diffrent constructors of the DrawImage method, with no success

Read the article

How to switch users in a smooth way in a Point-Of-Sale system?

- by Sanoj

I am designing a Point-Of-Sale system for a small shop. The shop just have one Point-Of-Sale but often they are one to three users (sellers) in the shop. Each user have their own user account in the system so they login and logout very often. How should I design the login/logout system in a good way? For the moment the users don't use passwords, because it takes so long time to type the password each time they login. The Platform is Windows Vista but I would like to support Windows 7 too. We use Active Directory on the Network. The system is developed in Java/Swing for the moment, but I'm thinking about to change to C#.NET/WPF. I am thinking about an SmartCard solution, but I don't know if that fits my situation. It would be more secure (which I like) but I don't know if it will be easy to implement and smooth to use, i.e. can I have the POS-system running in the background or started very quickly when the users switch? Are SmartCard solutions very expensive? (My customers are small shops) Is it preferred to use .NET or Java in a SmartCard solution? What other solutions do I have other than passwords/no passwords/smartcards? How should I design the login/logout system in a good way? Is there any good solution using SmartCards for this purpose? I would like suggested solutions both for C#.NET/WPF and Java/Swing platforms. I would like suggested solutions both for Active Directory solutions and solutions that only use one user profile in Windows. How is this problem solved in similar products? I have only seen password-solutions, but they are clumsy.

Read the article

UIImage Shadow Trouble

- by Brandon Schlenker

I'm trying to add a small shadow to an image, much like the icon shadows in the App Store. Right now I'm using the following code to round the corners of my images. Does anyone know how I can adapt it to add a small shadow? - (UIImage *)roundCornersOfImage:(UIImage *)source height:(int)height width:(int)width { int w = width; int h = height; CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); CGContextRef imageContext = CGBitmapContextCreate(NULL, w, h, 8, 4 * w, colorSpace, kCGImageAlphaPremultipliedFirst); CGContextBeginPath(imageContext); CGRect rect = CGRectMake(0, 0, w, h); addRoundedRectToPath(imageContext, rect, 10, 10); CGContextClosePath(imageContext); CGContextClip(imageContext); CGContextDrawImage(imageContext, CGRectMake(0, 0, w, h), source.CGImage); CGImageRef imageMasked = CGBitmapContextCreateImage(imageContext); CGContextRelease(imageContext); CGColorSpaceRelease(colorSpace); return [UIImage imageWithCGImage:imageMasked]; } "addRoundedRectToPath" refers to another method that obviously rounds the corners.

Read the article

TDD vs. Unit testing

- by Walter

My company is fairly new to unit testing our code. I've been reading about TDD and unit testing for some time and am convinced of their value. I've attempted to convince our team that TDD is worth the effort of learning and changing our mindsets on how we program but it is a struggle. Which brings me to my question(s). There are many in the TDD community who are very religious about writing the test and then the code (and I'm with them), but for a team that is struggling with TDD does a compromise still bring added benefits? I can probably succeed in getting the team to write unit tests once the code is written (perhaps as a requirement for checking in code) and my assumption is that there is still value in writing those unit tests. What's the best way to bring a struggling team into TDD? And failing that is it still worth writing unit tests even if it is after the code is written? EDIT What I've taken away from this is that it is important for us to start unit testing, somewhere in the coding process. For those in the team who pickup the concept, start to move more towards TDD and testing first. Thanks for everyone's input. FOLLOW UP We recently started a new small project and a small portion of the team used TDD, the rest wrote unit tests after the code. After we wrapped up the coding portion of the project, those writing unit tests after the code were surprised to see the TDD coders already done and with more solid code. It was a good way to win over the skeptics. We still have a lot of growing pains ahead, but the battle of wills appears to be over. Thanks for everyone who offered advice!

Read the article

Combine Text with a Draggable Mask AS3.0

- by RC

So I have an image that is the size of the stage: img_mc. Then I drew a small rectangle: mask_mc. The idea is to make a "window" of the small rectangle, view img_mc through the window, and be able to drag the window around. The following code works fine but I want to add text to the mask - "Drag Me!" or whatever. But if I group text with the mask it breaks down. If I make a separate text_mc I can drag it around but it's not part of the mask. How can I combine text with a mask? (sorry if this question is pathetically easy!) Thanks for any thoughts you can share! img_mc.mask = mask_mc; mask_mc.buttonMode = true; img_mc.cacheAsBitmap = true; //because I blurred the mask text_mc.addEventListener(MouseEvent.MOUSE_DOWN, dragF); mask_mc.addEventListener(MouseEvent.MOUSE_DOWN, dragF); stage.addEventListener(MouseEvent.MOUSE_UP, dropF); function dragF(event:MouseEvent):void{ mask_mc.startDrag(); } function dropF(event:MouseEvent):void{ mask_mc.stopDrag(); }

Read the article

iPhone sdk Cocoa Touch - Pass touches down from parent UIView to child UIScrollview

- by Joe

I have a UIView inside my xib in IB and inside that is a UIScrollview that is a small 80x80 square and dynamically loaded with 8 or so 80 x 80 thumbnail images. The UIScrollview is not clipping the images so that they extend out either side so you can swipe left and right to scroll a chosen image into the the centre, paging is on so they snap ti each image. I have researched and found this is the best and possibly only way to do this. The UIScrollview sits in a 'container' UIView for one reason, it is there to receive the touches/swipes and pass them down to it's child the UIScrollview as otherwise all touches would have to start in the small 80x80 UIScrollview area and I wan them to be anywhere along the row of images. I have seen some sample code somewhere for doing this but just can not implement it. Treat me as a noob, starting from beginning to end, how should the UIView and UIScrollview be set up in IB to allow any touches to be passed, and what code should I put into where? The UIView is set up as scroll_container and the child UIScrollview is char_scroll At the moment I have got it all working except for the touches being passed from the parent to the child, and at the moment the touches have to always start inside the UIScrollview (tiny 80x80 box in centre) when I want to be able to swipe left or right in the long 480X80 horizontal parent UIView and have this still scroll the child UIScrollview. Hope you can help and understand what I mean!

Read the article

What is the relationship between Turing Machine & Modern Computer ? [closed]

- by smwikipedia

I heard a lot that modern computers are based on Turing machine. I just cannot build a bridge between a conceptual Turing Machine and a modern computer. Could someone help me build this bridge? Below is my current understanding. I think the computer is a big general-purpose Turing machine. Each program we write is a small specific-purpose Turing machine. The classical Turing machine do its job based on the input and its current state inside and so do our programs. Let's take a running program (a process) as an example. We know that in the process's address space, there's areas for stack, heap, and code. A classical Turing machine doesn't have the ability to remember many things, so we borrow the concept of stack from the push-down automaton. The heap and stack areas contains the state of our specific-purpose Turing machine (our program). The code area represents the logic of this small Turing machine. And various I/O devices supply input to this Turing machine.

Read the article

jQuery - Not sure which method to use, closest() and parent() don't work.

- by Nike

Hello, again. :) God i feel like i'm spamming stackoverflow, this is my 3rd post for today. Sorry, heh. I even posted a question regarding this before, kind of, but i've changed the code a bit since so i thought it was better to post a new question. $('.pmlist ul li h4 .toggle').click(function() { $(this).closest('.meddel').toggle(250); }); That's what i've got now. The reason why the closest() method isn't working is because the div .meddel is just next to the h4 element. And closest() only crawls right up the DOM tree, ignoring other child elements. Right? parent() works almost the same and doesn't work either. And as i only want to toggle the closest .meddel div in the element, i need something that, yeah justs grabs the nearest one, and not all of them. To clear it up a bit, here's the HTML for one list item: <li class="item"> <h4><a class="toggle">ämne</a><small>2010-04-17 kl 12:54 by <u>nike1</u></small></h4> <div class="meddel"> <span> <img style="max-width: 70%; min-height: 70%;" src="profile-images/nike1.jpg" alt="" /> <a href="account.php?usr=47">nike1</a> </span> <p>text</p> </div> </li> I have several items like that, and if i click one toggle link, i just want the nearest .meddel to be toggled, as mentioned before. Thanks. -Nike

Read the article

An annoying printing issue with Crystal Reports 2008

- by Xience

A little background: I have an extremely annoying printing issue with crystal reports. My environment is crystal reports 2008 SP2 on Windows 7 (64bit), Visual studio 2008 and .net framework 3.5 with all the latest updates for everything. The report is designed basically to render a small shelf label of the size (40mm width and 20mm height). In crystal when I set the page size to the above mentioned values and set orientation to portrait and take a preview, everything is displayed as i expect it to be and issuing a print command, it prints absolutely correct. The problem: The problem comes when i print this report from my program (in vb.net), dynamically setting data to some text fields, the result is that crystal somehow changes the print orientation, NOT the paper orientation as in portrait or landscape. Instead of printing from top left towards the bottom right, it rotates the whole output at 90 degrees to the left and reduces everything so small that it is barely visible, although it prints everything out. I have tested it on Intermec PF8t and Zebra GK420d label printers and a whole bunch of laser printers, but with the above stated page settings the output is always the same. Another strange thing that i noticed while experimenting with page sizes if i switch to landscape mode, the print out is correct in its font sizes and positions but then the text gets truncated due to overflowing the page size. Can anyone help me with this. Does crystal has anything like its own print drivers or something. I have tried to ensure to the best of my abilities that it is not a printer driver problem.

Read the article

Looking for a smarter way to convert a Python list to a GList?

- by Kingdom of Fish

I'm really new to C - Python interaction and am currently writing a small app in C which will read a file (using Python to parse it) and then using the parsed information to execute small Python snippets. At the moment I'm feeling very much like I'm reinventing wheels, for example this function: typedef gpointer (list_func)(PyObject *obj); GList *pylist_to_glist(list_func func, PyObject *pylist) { GList *result = NULL; if (func == NULL) { fprintf(stderr, "No function definied for coverting PyObject.\n"); } else if (PyList_Check(pylist)) { PyObject *pIter = PyObject_GetIter(pylist); PyObject *pItem; while ((pItem = PyIter_Next(pIter))) { gpointer obj = func(pItem); if (obj != NULL) result = g_list_append(result, obj); else fprintf(stderr, "Could not convert PyObject to C object.\n"); Py_DECREF(pItem); } Py_DECREF(pIter); } return result; } I would really like to do this in a easier/smarter way less prone to memory leaks and errors. All comments and suggestions are appreciated.

Read the article

What are the best open-source software non-profits for making financial contributions and/or facilitating useful work?

- by Jason S

I'm not a great programmer myself (my main job is more electrical engineering) and have never really helped out with any open source projects, but I've benefited greatly from free and/or open-source software (MySQL, OpenOffice, Firefox, Apache, PHP, Java, etc.) and at some point would like to make some modest financial contributions to help keep this stuff going. I'm wondering, what are the best non-profits to make financial contributions? I'm aware of: Open Source Initiative (founded 10 years ago by several prominent figures including programmer and "The Cathedral and the Bazaar" author Eric S. Raymond) Free Software Foundation Mozilla Foundation Apache Foundation Anyone have a particular favorite? Ideally I'd like to give money to a non-profit that would foster some of the smaller but promising open-source and/or free software projects. The big projects like Firefox and Apache are already well-established. There are a few small individual shareware programs I've already paid for directly. But it's those middle-ground projects that I would really like my contributions to support. (one that comes to mind is a good GUI for Subversion or Mercurial.) It's one thing for a single person to donate a little $$ to a small project. It's another for a foundation or something to give larger grants to projects that give a good bang for the buck. Conservation organizations like The Nature Conservancy, or the Trust for Public Lands, have really honed this approach, but I'm not really sure if there's an equivalent model in software-land.

Read the article

Perl XML SAX parser emulating XML::Simple record for record

- by DVK

Short Q summary: I am looking a fast XML parser (most likely a wrapper around some standard SAX parser) which will produce per-record data structure 100% identical to those produced by XML::Simple. Details: We have a large code infrastructure which depends on processing records one-by-one and expects the record to be a data structure in a format produced by XML::Simple since it always used XML::Simple since early Jurassic era. An example simple XML is: <root> <rec><f1>v1</f1><f2>v2</f2></rec> <rec><f1>v1b</f1><f2>v2b</f2></rec> <rec><f1>v1c</f1><f2>v2c</f2></rec> </root> And example rough code is: sub process_record { my ($obj, $record_hash) = @_; # do_stuff } my $records = XML::Simple->XMLin(@args)->{root}; foreach my $record (@$records) { $obj->process_record($record) }; As everyone knows XML::Simple is, well, simple. And more importantly, it is very slow and a memory hog - due to being a DOM parser and needing to build/store 100% of data in memory. So, it's not the best tool for parsing an XML file consisting of large amount of small records record-by-record. However, re-writing the entire code (which consist of large amount of "process_record"-like methods) to work with standard SAX parser seems like an big task not worth the resources, even at the cost of living with XML::Simple. What I'm looking for is an existing module which will probably be based on a SAX parser (or anything fast with small memory footprint) which can be used to produce $record hashrefs one by one based on the XML pictured above that can be passed to $obj->process_record($record) and be 100% identical to what XML::Simple's hashrefs would have been.

Read the article

Rich editor.. need to replace ccorrect string...

- by JamesM

On my website I have a login and an article tag for editing. my article code is in HTML5 witch is enough as my editor rule is HTML5: HTML5: index.php line 212 <article contentEditable="false"> >> Changes to true when in edit mode.. <div>One row of text goes here.</div> <div>Row two's content goes here.</div> </article> I want to be able to get the selected text via JS. JS: js.php format : (function(format){ if (user = "{$ADMIN}"){ selection = getSelection(); text = selection.toString(); switch(format){ case "big": result = text.big(); break; case "small": result = text.small(); break; case "bold": result = text.bold(); break; case "italics": result = text.italics(); break; case "fixed": result = text.fixed(); break; case "strike": result = text.strike(); break; case "fontcolor": result = text.fontcolor(); break; case "fontsize": result = text.fontsize(); break; case "sub": result = text.sub(); break; case "sup": result = text.sup(); break; case "link": result = text.link(); break; } } }), I can replace the text with the result but that will replace all of them I a=can do only the first but i want to do it to the selected...

Read the article

Write to file using CopyHere without using WScript.Sleep

- by mlevit

Hi guys, I've written a small VBScript to creates a .zip file and then copies the contents of a specified folder into that .zip file. I copy the files over one by one for a reason (I know I can do the whole lot at once). However my problem is when I try to copy them one by one without a WScript.Sleep between each loop iteration I get a "File not found or no read permission." error; if I place a WScript.Sleep 200 after each write it works but not 100% of the time. Pretty much I'd like to get rid of the Sleep function and not rely on that because depending on the file size it may take longer to write therefore 200 milliseconds may not be enough etc. As you can see with the small piece of code below, I loop through the files, then if they match the extension I place them into the .zip (zipFile) For Each file In folderToZip.Items For Each extension In fileExtensions if (InStr(file, extension)) Then zipFile.CopyHere(file) WScript.Sleep 200 Exit For End If Next Next Any suggestions on how I can stop relying on the Sleep function? Thanks

Read the article

Game login authentication and security.

- by Charles

First off I will say I am completely new to security in coding. I am currently helping a friend develop a small game (in Python) which will have a login server. I don't have much knowledge regarding security, but I know many games do have issues with this. Everything from 3rd party applications (bots) to WPE packet manipulation. Considering how small this game will be and the limited user base, I doubt we will have serious issues, but would like to try our best to limit problems. I am not sure where to start or what methods I should use, or what's worth it. For example, sending data to the server such as login name and password. I was told his information should be encrypted when sending, so in-case someone was viewing it (with whatever means), that they couldn't get into the account. However, if someone is able to capture the encrypted string, wouldn't this string always work since it's decrypted server side? In other words, someone could just capture the packet, reuse it, and still gain access to the account? The main goal I am really looking for is to make sure the players are logging into the game with the client we provide, and to make sure it's 'secure' (broad, I know). I have looked around at different methods such as Public and Private Key encryption, which I am sure any hex editor could eventually find. There are many other methods that seem way over my head at the moment and leave the impression of overkill. I realize nothing is 100% secure. I am just looking for any input or reading material (links) to accomplish the main goal stated above. Would appreciate any help, thanks.

Read the article

javascript text overlay

- by Gwilym

Im pretty unknowledgeable about javascript being desktop application rather a web programmer but I'm trying to add an element to a friends website. Google has failed all my attempts to find a script I can adapt. What I want is a small text box in the bottom right hand corner of the browser window that sits above the html/css, that will disappear if the user scrolls. could provide a small chunk of javascript that could help? or point me to a script which could be adapted. thanks [EDIT] Final Code HTML: <body onscroll="document.getElementById('textbox').style.display = 'none';" > <div id="textbox"> Please Scroll down for more information </div> CSS #textbox { background-color :#FF732F; border: solid 1px #5F6800; padding: 5px; position: absolute; z-index: 9999; right: 0; bottom:0; } [/EDIT]

Read the article

Latex renewcommand not working properly

- by Nazgulled

Why is this not working: \documentclass[a4paper,10pt]{article} \usepackage{a4wide} \usepackage[T1]{fontenc} \usepackage[portuguese]{babel} \usepackage[latin1]{inputenc} \usepackage{indentfirst} \usepackage{listings} \usepackage{fancyhdr} \usepackage{url} \usepackage[compat2,a4paper,left=25mm,right=25mm,bottom=15mm,top=20mm]{geometry} \usepackage{color} \usepackage[colorlinks]{hyperref} \usepackage[pdftex]{graphicx} \renewcommand{\headrulewidth}{0.4pt} \renewcommand{\footrulewidth}{0.4pt} \pagestyle{fancy} \fancyhead[L]{\small Laboratórios de Informática III} \fancyhead[R]{\small Projecto 1 (Linguagem \textsf{C})} \lstset{ basicstyle=\ttfamily\footnotesize, showstringspaces=false, frame=single, tabsize=4, breaklines=true, } \definecolor{Section1}{rgb}{0.09,0.21,0.36} \definecolor{Section2}{rgb}{0.21,0.37,0.56} \definecolor{Section3}{rgb}{0.30,0.50,0.74} \hypersetup{ bookmarks=false, linkcolor=red, urlcolor=cyan, } \renewcommand{\section}[1]{\texorpdfstring{\color{green}#1}{#1}} \parskip=6pt \begin{document} \begin{titlepage} \begin{center} \includegraphics[width=5cm]{./logo.jpg}\\[1cm] \textsc{\LARGE Universidade do Minho}\\[1cm] \textsc{\large Licenciatura em Engenharia Informática\\Laboratórios de Informática III}\\[1.5cm] \rule{\linewidth}{0.5mm}\\[0.4cm] \huge{\textbf{\textsc{Relatório do Projecto 1 (Linguagem C)}}} \rule{\linewidth}{0.5mm} \vfill \begin{tabular}{c c} \includegraphics[width=3.5cm]{./nuno.jpg} & \includegraphics[width=3.5cm]{./ricardo.jpg} \\ \textsc{\large{Nuno Mendes (51161)}} & \textsc{\large{Ricardo Amaral (48404)}} \\ \end{tabular} \vfill \large{\today} \end{center} \end{titlepage} \tableofcontents \newpage \section{Introdução} Lorem ipsum... \newpage \appendix \section{\color{Section1}Diagrama das Estruturas de Dados} \begin{center} \includegraphics[width=16cm]{./Diagrama.pdf} \end{center} \end{document} ! LaTeX Error: Something's wrong--perhaps a missing \item. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.2 ...rline {1}\color {green}Teste}{3}{section.1} How can I make it work properly?

Read the article

Is it practical to program with your feet?

- by bmm

Has anyone tried using foot pedals in addition to the traditional keyboard and mouse combo to improve your effectiveness in the editor? Any actual experiences out there? Does it work, or is it just for carpal tunnel relief? I found one blog entry from a programmer who actually tried it: So now I can type using my feet for most of the modifier keys. I am using the pedals as I type this. I am still getting used to them, but the burning in my left wrist has definitely reduced. I think I can also type a little faster, but I am too lazy to do the speed tests with and without the pedals to verify this. On the negative side: Working out where to put your feet when you aren’t typing can be a little awkward. The pedals tend to move around the carpet, despite being metal and quite heavy. Some small spikes might have helped. Although the travel on the pedals is small, they are surprisingly stiff. Another programmer's experience: Anybody with hand pain must get foot pedals, since they can remove a tremendous load from your hands. I have two foot pedals, and use one for the SHIFT key, and the other for the CONTROL key. (I still type META by hand.) I have found that in the process of using the Emacs text editor to compose computer programs, I tend to use the SHIFT, CONTROL and META keys constantly, and it is easy to remove most of this load from one's hands. Some foot switch products: Savant Elite Triple Foot Switch FragPedal Bilbo Step On It!

Read the article

jQuery autocomplete for dynamically created inputs

- by Jamatu

Hi all! I'm having an issue using jQuery autocomplete with dynamically created inputs (again created with jQuery). I can't get autocomplete to bind to the new inputs. Autocomplete $("#description").autocomplete({ source: function(request, response) { $.ajax({ url: "../../works_search", dataType: "json", type: "post", data: { maxRows: 15, term: request.term }, success: function(data) { response($.map(data.works, function(item) { return { label: item.description, value: item.description } })) } }) }, minLength: 2, }); New table row with inputs var i = 1; var $table = $("#works"); var $tableBody = $("tbody",$table); $('a#add').click(function() { var newtr = $('<tr class="jobs"><td><input type="text" name="item[' + i + '][quantity]" /></td><td><input type="text" id="description" name="item[' + i + '][works_description]" /></td></tr>'); $tableBody.append(newtr); i++; }); I'm aware that the problem is due to the content being created after the page has been loaded but I can't figure out how to get around it. I've read several related questions and come across the jQuery live method but I'm still in a jam! Any advice?

Read the article

Can pdflatex (or any tex package) automatically rescale included images which have been reduced in s

- by drfrogsplat

I'm writing my thesis in LaTeX, generating it with pdflatex. I have a large number of figures, many of which are bitmaps (as opposed to SVG) in PNG/JPEG format. I've generally created them to be fairly high resolution (say 1600x1200-ish) to ensure that whatever size they end up in the document, they'll be at least 300dpi when printed. As I'm writing/laying out the document, I'm including graphics (using \includegraphics from the graphicx package) and setting widths/heights as appropriate (e.g. subfigures are quite small). I don't need the images to be any more than about 300 dpi at best, so where I have shrunk a 1600x1200 image down to say 5cm, the image is now at 800 dpi. So despite including some very small (on the page) images, the PDF is becoming quite large. Is there a way to tell pdflatex or graphicx (or something else involved?) to convert all images to a maximum of 300 dpi, based on the dimensions I'm setting with say \includegraphics[width=2in]{filename}? i.e. so it scales the image to a max of 600x600 pixels as it includes it in the PDF (leaving the original file untouched). I know I can resize the original images with various command line applications, and include the pre-resized versions, but given the images vary in size considerably, it wouldn't be as simple as making sure they're all 300dpi for a constant printed size. It'd also be nice to be able to easily create different versions of PDFs (web vs final print) without resizing images manually, so that the 'web' PDF capped images at say 72-100 dpi while the final print one could cap at 600 (if at all).

Search Results

Search found 12887 results on 516 pages for 'small jam'.

Page 110/516 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117 | Next Page >

- by i13m

- by ereOn

- by user289346

- by Brian

- by nute

- by Tony

- by Sanoj

- by Brandon Schlenker

- by Walter

- by RC

- by Joe

- by smwikipedia

- by Nike

- by Xience

- by Kingdom of Fish

- by Jason S

- by DVK

- by JamesM

- by mlevit

- by Charles

- by Gwilym

- by Nazgulled

- by bmm

- by Jamatu

- by drfrogsplat

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117 | Next Page >