Search Results

Search found 19385 results on 776 pages for 'canonical link'.

Page 111/776 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

• Strange DNS issue with internal Windows DNS

  - by Brady

  I've encountered a strange issue with our internal Windows DNS infrastructure. We have a website hosted on Amazon EC2 with the DNS running on Amazon Route 53. In the publicly facing DNS we have the wildcard record setup as an A record Alias pointing to an AWS Elastic Load Balancer sitting in front of our EC2 instances. For those who are not aware, the A record Alias behaves like a CNAME record, however no extra lookup is required on the client side (See http://docs.amazonwebservices.com/Route53/latest/DeveloperGuide/CreatingAliasRRSets.html for more information). We have a secondary domain that has the www subdomain as a CNAME pointing to a subdomain on the primary domain, which resolves against the wildcard entry. For example the subdomain www.secondary.com is a CNAME to sub1.primary.com, but there is no explicit entry for sub1.primary.com, so it resolves to wildcard record. This setup work without issue publicly. The issue comes in our internal DNS at our corporate office where we use the same primary domain for some internal only facing sites. In this setup we have two Active Directory DNS servers with one Server 2003 and one Server 2008 R2 instance. The zone is an AD integrated zone, but it is not the AD domain. In the internal DNS we have the wildcard record pointing to a third external domain, that is also hosted on Route 53 with an A record Alias pointing to the same ELB instance. For example, *.primary.com is a CNAME to tertiary.com, so in effect you have www.secondary.com as a CNAME to *.primary.com, which is a CNAME to tertiary.com. In this setup, attempting to resolve www.secondary.com will fail. Clearing the cache on the Server 2003 instance will allow it to resolve once, but subsequent attempts will fail. It fails even with a clean cache against the 2008 R2 server. It seems that only Windows clients are affected. A Mac running OSX Mountain Lion does not experience this issue. I'm even able to replicate the issue using nslookup. Against the 2003 server, with a freshly cleaned cache, I recieve the appropriate response from www.secondary.com: Non-authoritative answer: Name: subdomain.primary.com Address: x.x.x.x (Public IP) Aliases: www.secondary.com Subsequent checks simply return: Non-authoritative answer: Name: www.secondary.com If you set the type to CNAME you get the appropriate responses all the time. www.secondary.com gives you: Non-authoritative answer: www.secondary.com canonical name = subdomain.primary.com And subdomain.primary.com gives you: subdomain.primary.com canonical name = tertiary.com And setting type back to A gives you the appropriate response for tertiary.com: Non-authoritative answer: Name: tertiary.com Address: x.x.x.x (Public IP) Against the 2008 R2 server things are a little different. Even with a clean cache, www.secondary.com returns just: Non-authoritative answer: Name: www.secondary.com The CNAME records are returned appropriately. www.secondary.com returns: Non-authoritative answer: www.secondary.com canonical name = subdomain.primary.com And subdomain.primary.com gives you: subdomain.primary.com canonical name = tertiary.com tertiary.com internet address = x.x.x.x (Public IP) tertiary.com AAAA IPv6 address = x::x (Public IPv6) And setting type back to A gives you the appropriate response for tertiary.com: Non-authoritative answer: Name: tertiary.com Address: x.x.x.x (Public IP) Requests directly against subdomain.primary.com work correctly.

  Read the article

• NIC Bonding/balance-rr with Dell PowerConnect 5324

  - by Branden Martin

  I'm trying to get NIC bonding to work with balance-rr so that three NIC ports are combined, so that instead of getting 1 Gbps we get 3 Gbps. We are doing this on two servers connected to the same switch. However, we're only getting the speed of one physical link. We are using 1 Dell PowerConnect 5324, SW version 2.0.1.3, Boot version 1.0.2.02, HW version 00.00.02. Both servers are CentOS 5.9 (Final) running OnApp Hypervisor (CloudBoot) Server 1 is using ports g5-g7 in port-channel 1. Server 2 is using ports g9-g11 in port-channel 2. Switch show interface status Port Type Duplex Speed Neg ctrl State Pressure Mode -------- ------------ ------ ----- -------- ---- ----------- -------- ------- g1 1G-Copper -- -- -- -- Down -- -- g2 1G-Copper Full 1000 Enabled Off Up Disabled Off g3 1G-Copper -- -- -- -- Down -- -- g4 1G-Copper -- -- -- -- Down -- -- g5 1G-Copper Full 1000 Enabled Off Up Disabled Off g6 1G-Copper Full 1000 Enabled Off Up Disabled Off g7 1G-Copper Full 1000 Enabled Off Up Disabled On g8 1G-Copper Full 1000 Enabled Off Up Disabled Off g9 1G-Copper Full 1000 Enabled Off Up Disabled On g10 1G-Copper Full 1000 Enabled Off Up Disabled On g11 1G-Copper Full 1000 Enabled Off Up Disabled Off g12 1G-Copper Full 1000 Enabled Off Up Disabled On g13 1G-Copper -- -- -- -- Down -- -- g14 1G-Copper -- -- -- -- Down -- -- g15 1G-Copper -- -- -- -- Down -- -- g16 1G-Copper -- -- -- -- Down -- -- g17 1G-Copper -- -- -- -- Down -- -- g18 1G-Copper -- -- -- -- Down -- -- g19 1G-Copper -- -- -- -- Down -- -- g20 1G-Copper -- -- -- -- Down -- -- g21 1G-Combo-C -- -- -- -- Down -- -- g22 1G-Combo-C -- -- -- -- Down -- -- g23 1G-Combo-C -- -- -- -- Down -- -- g24 1G-Combo-C Full 100 Enabled Off Up Disabled On Flow Link Ch Type Duplex Speed Neg control State -------- ------- ------ ----- -------- ------- ----------- ch1 1G Full 1000 Enabled Off Up ch2 1G Full 1000 Enabled Off Up ch3 -- -- -- -- -- Not Present ch4 -- -- -- -- -- Not Present ch5 -- -- -- -- -- Not Present ch6 -- -- -- -- -- Not Present ch7 -- -- -- -- -- Not Present ch8 -- -- -- -- -- Not Present Server 1: cat /etc/sysconfig/network-scripts/ifcfg-eth3 DEVICE=eth3 HWADDR=00:1b:21:ac:d5:55 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth4 DEVICE=eth4 HWADDR=68:05:ca:18:28:ae USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth5 DEVICE=eth5 HWADDR=68:05:ca:18:28:af USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-onappstorebond DEVICE=onappstorebond IPADDR=10.200.52.1 NETMASK=255.255.0.0 GATEWAY=10.200.2.254 NETWORK=10.200.0.0 USERCTL=no BOOTPROTO=none ONBOOT=yes cat /proc/net/bonding/onappstorebond Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1b:21:ac:d5:55 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:28:ae Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:28:af Server 2: cat /etc/sysconfig/network-scripts/ifcfg-eth3 DEVICE=eth3 HWADDR=00:1b:21:ac:d5:a7 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth4 DEVICE=eth4 HWADDR=68:05:ca:18:30:30 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth5 DEVICE=eth5 HWADDR=68:05:ca:18:30:31 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-onappstorebond DEVICE=onappstorebond IPADDR=10.200.53.1 NETMASK=255.255.0.0 GATEWAY=10.200.3.254 NETWORK=10.200.0.0 USERCTL=no BOOTPROTO=none ONBOOT=yes cat /proc/net/bonding/onappstorebond Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1b:21:ac:d5:a7 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:30:30 Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:30:31 Here are the results of iperf. ------------------------------------------------------------ Client connecting to 10.200.52.1, TCP port 5001 TCP window size: 27.7 KByte (default) ------------------------------------------------------------ [ 3] local 10.200.3.254 port 53766 connected with 10.200.52.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 950 MBytes 794 Mbits/sec

  Read the article

• wireless internet in linux is very very slow... but in windows.... everythnings fine

  - by Cody Acer

  yesterday when i was connecting to our neighbors wifi connection which is the signal strength is below 50%, i cant browse anything... even ping to gateway. 100% packet loss, and sometimes.. i can connect awesomely i can open my facebook account for 15 minutes but after 15min.. connection is extremely slow. but not windows i can surf even the signal str is very poor weird ey??.. root@Emely:~# lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a010] Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller [0380]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a012] Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel modules: i2c-i801 05:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01) Subsystem: Wistron NeWeb Corp. Device [185f:051a] Kernel driver in use: bcma-pci-bridge Kernel modules: bcma 09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: sky2 Kernel modules: sky2 root@Emely:~# ip addr show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether e8:11:32:2e:a6:fd brd ff:ff:ff:ff:ff:ff 3: wlan0: mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:1b:b1:a9:ac:e0 brd ff:ff:ff:ff:ff:ff inet 192.168.1.108/24 brd 192.168.1.255 scope global wlan0 inet6 fe80::21b:b1ff:fea9:ace0/64 scope link valid_lft forever preferred_lft forever root@Emely:~# ip link show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether e8:11:32:2e:a6:fd brd ff:ff:ff:ff:ff:ff 3: wlan0: mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:1b:b1:a9:ac:e0 brd ff:ff:ff:ff:ff:ff root@Emely:~# rfkill list all 0: samsung-wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: samsung-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no 3: phy0: Wireless LAN Soft blocked: no Hard blocked: no is this a wireless driver issue?

  Read the article

• SharePoint Upgrade Global Nav Quirks?

  - by elorg

  We're working on a parallel install/upgrade of SharePoint. The client has WSS 2003 on some old hardware. We've installed MOSS 2007 in a medium farm environment. They want to use this as an opportunity to not just upgrade and use the new features, but to also better organize their content and categorize between different site collections. To accommodate, we've created a few site collections per their specifications in the new environment, and when we ran an upgrade test run we ran into a few .. quirks. We made a backup of the old content database, copied it over to the new environment and restored it as a new database. Created a new web app and attached the migrated data to do an in-place upgrade in this new "test" area. This seems pretty standard - no issues. We have to do a little bit of cleanup (e.g. reset pages to site definition, reset themes, and inherit the global nav / top link bar, etc.). Once that's done, we're using stsadm export/import to copy the individual sites over to their ultimate destinations in the various different site collections. So far so good. But then we ran into one particular site that has a link to an .aspx page in the top link bar in WSS 2003 that's not behaving properly after the upgrade. It's just a link to a "dashboard" .aspx page in a doc library - nothing special. It doesn't seem to matter what we do, or what order we do it (in the "test" web app, in the destination web app, or both). In the end, this ONE site will not allow us to create a link/tab in the global nav. It can inherit the global nav just fine. We can break the inheritance just fine. But if we want to manually add a link in the top link bar - we go through the steps that I've done 1,000x before and click OK - and the tab never appears. It doesn't matter if it's to a page within the site itself, or to Google. We can migrate over other sites into the same site collection and add a tab without issue. If we migrate this quirky site over to another site collection we run into the same issue. Yet, in the "test" web app that we're using to upgrade the data we can add a tab? If we add the tab before we export/import to the final destination, the tab is lost during the process? Has anyone run into anything like this? Any ideas? I've tried every combination of everything that I can think of and nothing works. Unless we can figure out how to get this to work, we're going to just add this tab to the global nav for the entire site collection and inherit it for this site (but that adds the link to all of the site that will inherit, which is both a pro & con for them).

  Read the article

• Calling AS3 function from html link - Javascript? php? swfaddress?

  - by wdense51

  I have an actionscript function that loads an external swf and is currently linked to a button in the same swf... function btnClick(event:MouseEvent):void{ SoundMixer.stopAll(); removeChild(loader); loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onSWFLoaded); loader.load(movieSWF) loader.x=Xpos loader.y=Ypos addChild(loader) } button.addEventListener(MouseEvent.CLICK,btnClick); I'm wondering if there is a way to call this function from a link on the page that the swf is housed on. I'm guessing javascript, php or swfaddress would be the most likely way, but I'm unbelievably new to all this so I'm not sure where to start or how to go about it. Any help would be appreciated.

  Read the article

• KVM + Cloudmin + IpTables

  - by Alex

  I have a KVM virtualization on a machine. I use Ubuntu Server + Cloudmin (in order to manage virtual machine instances). On a host system I have four network interfaces: ebadmin@saturn:/var/log$ ifconfig br0 Link encap:Ethernet HWaddr 10:78:d2:ec:16:38 inet addr:192.168.0.253 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::1278:d2ff:feec:1638/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:589337 errors:0 dropped:0 overruns:0 frame:0 TX packets:334357 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:753652448 (753.6 MB) TX bytes:43385198 (43.3 MB) br1 Link encap:Ethernet HWaddr 6e:a4:06:39:26:60 inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::6ca4:6ff:fe39:2660/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16995 errors:0 dropped:0 overruns:0 frame:0 TX packets:13309 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2059264 (2.0 MB) TX bytes:1763980 (1.7 MB) eth0 Link encap:Ethernet HWaddr 10:78:d2:ec:16:38 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:610558 errors:0 dropped:0 overruns:0 frame:0 TX packets:332382 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:769477564 (769.4 MB) TX bytes:44360402 (44.3 MB) Interrupt:20 Memory:fe400000-fe420000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:239632 errors:0 dropped:0 overruns:0 frame:0 TX packets:239632 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:50738052 (50.7 MB) TX bytes:50738052 (50.7 MB) tap0 Link encap:Ethernet HWaddr 6e:a4:06:39:26:60 inet6 addr: fe80::6ca4:6ff:fe39:2660/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17821 errors:0 dropped:0 overruns:0 frame:0 TX packets:13703 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:2370468 (2.3 MB) TX bytes:1782356 (1.7 MB) br0 is connected to a real network, br1 is used to create a private network shared between guest systems. Now I need to configure iptables for network access. First of all I allow ssh sessions on port 8022 on the host system, then I allow all connections in state RELATED, ESTABLISHED. This is working ok. I install another system as guest, it's IP address is 192.168.10.2, and now I have two problems: I want to allow the access from this host to the outside world, cannot accomplish this. I can ssh from the host. I want to be able to ssh to the guest from the outside world using 8023 port. Cannot accomplish this. Full iptables configuration is following: ebadmin@saturn:/var/log$ sudo iptables --list [sudo] password for ebadmin: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:8022 ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED LOG all -- anywhere anywhere LOG level warning Chain FORWARD (policy ACCEPT) target prot opt source destination LOG all -- anywhere anywhere LOG level warning Chain OUTPUT (policy ACCEPT) target prot opt source destination LOG all -- anywhere anywhere LOG level warning ebadmin@saturn:/var/log$ sudo iptables -t nat --list Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT tcp -- anywhere anywhere tcp spt:8023 to:192.168.10.2:22 Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination The worst of all is that I don't know how to interpret iptables logs. I don't see the final decision of the firewall. Need help urgently.

  Read the article

• vconfig created virtual interface and trunking - is the the interface untagged or tagged for that VLAN ID?

  - by kce

  I am trying to setup an additional VLAN on our Debian-based router/firewall (which exists as a virtual machine on Hyper-V), our core switch (an HP Procurve 5406) and a remote HP ProCurve 2610 that is connected via a WAN Transparent Lan Service (TLS) link. Let's work backwards from the network edge: The Debian server has an external connection attached to eth0. The internal interface is eth1, which is connected directly from our Hyper-V host to the 5406. The port that eth1 is attached to is setup as Trk12. The 2610 is attached to Trk9 (which trunks a whole slew of VLANs - Trk9 is our TLS head). I can successfully ping the management IP addresses for my VLAN from both switches but I cannot ping, from either switch, the virtual interface for my new VLAN on the Debian-base router and firewall. The existing VLAN works fine. What gives? The port eth1 is attached to is a trunk, the existing VLAN (ID 98) is untagged on the trunk, the new VLAN (ID 198) is tagged. VLAN 198 is tagged on Trk9 on the 5406 and on the 2610. I can ping the other switch's management IP (10.100.198.2 and 10.100.198.3) from the other respective switch. That leg of the VLAN works - however I cannot communicate with eth1.198's 10.100.198.1. I feel like I'm missing something elementary but what it is remains illusive to me. I suspect the issue is with the vconfig created eth1.198. It should pass the tagged VLAN 198 packets correct? But they cannot seem to get any further than the 5406. Communication on the existing VLAN 98 works fine. From the Debian box: eth1: eth1 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.0.1 Bcast:10.100.255.255 Mask:255.255.0.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12179786 errors:0 dropped:0 overruns:0 frame:0 TX packets:20210532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1586498028 (1.4 GiB) TX bytes:26154226278 (24.3 GiB) Interrupt:9 Base address:0xec00 eth1.198: eth1.198 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.198.1 Bcast:10.100.198.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1496 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:72 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:3528 (3.4 KiB) # cat /proc/net/vlan/eth1.198: eth1.198 VID: 198 REORDER_HDR: 0 dev->priv_flags: 1 total frames received 0 total bytes received 0 Broadcast/Multicast Rcvd 0 total frames transmitted 72 total bytes transmitted 3528 total headroom inc 0 total encap on xmit 39 Device: eth1 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESS priority mappings: # ip route 10.100.198.0/24 dev eth1.198 proto kernel scope link src 10.100.198.1 206.174.64.0/20 dev eth0 proto kernel scope link src 206.174.66.14 10.100.0.0/16 dev eth1 proto kernel scope link src 10.100.0.1 default via 206.174.64.1 dev eth0 # iptables -L -v Chain INPUT (policy DROP 6875 packets, 637K bytes) pkts bytes target prot opt in out source destination 41 4320 ACCEPT all -- lo any anywhere anywhere 11481 1560K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 107 8058 ACCEPT icmp -- any any anywhere anywhere 0 0 ACCEPT tcp -- eth1 any 10.100.0.0/24 anywhere tcp dpt:ssh 701 317K ACCEPT udp -- eth1 any anywhere anywhere udp dpts:bootps:bootpc Chain FORWARD (policy DROP 1 packets, 40 bytes) pkts bytes target prot opt in out source destination 156K 25M ACCEPT all -- eth1 any anywhere anywhere 215K 248M ACCEPT all -- eth0 eth1 anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT all -- eth1.198 any anywhere anywhere 0 0 ACCEPT all -- eth0 eth1.198 anywhere anywhere state RELATED,ESTABLISHED Chain OUTPUT (policy ACCEPT 13048 packets, 1640K bytes) pkts bytes target prot opt in out source destination From the 5406: # show vlan ports trk12 detail Status and Counters - VLAN Information - for ports Trk12 VLAN ID Name | Status Voice Jumbo Mode ------- -------------------- + ---------- ----- ----- -------- 98 WIFI | Port-based No No Untagged 198 VLAN198 | Port-based No No Tagged

  Read the article

• ovs-vsctl: "eth0" is not a valid UUID

  - by Przemek Lach

  I'm trying to setup an open v-switch inside my Ubuntu 12.04 Server VM. I have created three interfaces for this VM and I want to create a port mirror inside of the VM using these there interfaces and open v-switch. There are three Host-Only Adapters: eth0, eth1, eth2. The idea is that three other VM's will be connected to these adapters. One of these VM's will stream UDP video to eth0 and I want the vswitch'd VM to mirror those packets from eth0 onto eth1 and eth2. Each of the VM's connected to eth1 and eth2 will get the same video stream. I performed the following steps to install open v-switch: $ apt-get install python-simplejson python-qt4 python-twisted-conch automake autoconf gcc uml-utilities libtool build-essential $ apt-get install build-essential autoconf automake pkg-config $ wget http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ tar xf http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ cd http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ apt-get install libssl-dev iproute tcpdump linux-headers-`uname -r` $ ./boot.sh $ ./configure - -with-linux=/lib/modules/`uname -r`/build $ make $ sudo make install After installation I configured as follows: $ insmod datapath/linux/openvswitch.ko $ sudo touch /usr/local/etc/ovs-vswitchd.conf $ mkdir -p /usr/local/etc/openvswitch $ ovsdb-tool create /usr/local/etc/openvswitch/conf.db Then I started the server: $ ovsdb-server /usr/local/etc/openvswitch/conf.db \ --remote=punix:/usr/local/var/run/openvswitch/db.sock \ --remote=db:Open_vSwitch,manager_options \ --private-key=db:SSL,private_key \ --certificate=db:SSL,certificate \ --bootstrap-ca-cert=db:SSL,ca_cert --pidfile --detach --log-file $ ovs-vsctl –no-wait init (run only once) $ ovs-vswitchd --pidfile --detach The above steps I got from this tutorial and it all worked fine. I then proceeded to add a port mirror based on the open v-switch documentation under Port Mirroring. I successfully completed the following commands: $ ovs-vsctl add-br br0 $ ovs-vsctl add-port br0 eth0 $ ovs-vsctl add-port br0 eth1 $ ovs-vsctl add-port br0 eth2 $ ifconfig eth0 promisc up $ ifconfig eth1 promisc up $ ifconfig eth2 promisc up At this point when I run ovs-vsctl show I get the following: 75bda8c2-b870-438b-9115-e36288ea1cd8 Bridge "br0" Port "br0" Interface "br0" type: internal Port "eth0" Interface "eth0" Port "eth2" Interface "eth2" Port "eth1" Interface "eth1" And when I run ifconfig I get the following: eth0 Link encap:Ethernet HWaddr 08:00:27:9f:51:ca inet6 addr: fe80::a00:27ff:fe9f:51ca/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth1 Link encap:Ethernet HWaddr 08:00:27:53:02:d4 inet6 addr: fe80::a00:27ff:fe53:2d4/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth2 Link encap:Ethernet HWaddr 08:00:27:cb:a5:93 inet6 addr: fe80::a00:27ff:fecb:a593/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth3 Link encap:Ethernet HWaddr 08:00:27:df:bb:d8 inet addr:192.168.1.139 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fedf:bbd8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2211 errors:0 dropped:0 overruns:0 frame:0 TX packets:1196 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:182987 (182.9 KB) TX bytes:125441 (125.4 KB) NOTE: I use eth3 as a bridge adapter for SSH'ing into the VM. So now, I think I've done everything correctly but when I try to create the bridge using the following command: $ ovs-vsctl -- set Bridge br0 mirrors=@m -- --id=@eth0 get Port eth0 -- --id=@eth1 get Port eth1 -- --id=@m create Mirror name=app1Mirror select-dst-port=eth0 select-src-port=@eth0 output-port=@eth1,eth2 I get the following error: ovs-vsctl: "eth0" is not a valid UUID I don't understand why it's not able to find the interfaces?

  Read the article

• howto only tunnel specific hosts route through openvpn client on tomato

  - by kcome

  I am relatively newbie in networking world although I did coding and know some sysadmin background for a long time. and here I'm only one step from my destination. The whole picture is : at home I use one LinkSys E3000 as the gateway(don't know yet if this is it's name), wireless AP and no other routing/switching devices. It serves 1 PC and 1 Mac with LAN, 1 Mac Mini + 1 iPad + 2 smartphones with WIFI. My goal is use an openvpn client on the E3000 (with tomato firmware) and make my iPad and smartphone's all WiFi traffic through it, and other devices route remain the same non-openvpn route. So far I'm able to connect openvpn client on E3000 to an openvpn server, tunnel all my devices' all traffic through that openvpn connection. What's left is howto selectively route by source IP (at least in my guessing) to the tunnel while don't bother others. I had learned some 'iptables' and 'route' in past few days however without much luck, so here comes my question. Here are some info which will help you get the structure. ifconfig -a output, some useless lines striped, and in the web interface C0:C1:C0:1A:E0:28 is WAN, C0:C1:C0:1A:E0:27 is LAN, C0:C1:C0:1A:E0:29 is 2.4G wifi AP, C0:C1:C0:1A:E0:2A is 5G wifi AP. root@router:/tmp/home/root# ifconfig -a br0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 eth2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:2A UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host ppp0 Link encap:Point-to-Point Protocol inet addr:172.200.1.43 P-t-P:172.200.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING MULTICAST MTU:1480 Metric:1 vlan1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 vlan2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:28 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 wl0.1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 BROADCAST MULTICAST MTU:1500 Metric:1 brctl show output root@router:/tmp/home/root# brctl show bridge name bridge id STP enabled interfaces br0 8000.c0c1c01ae027 no vlan1 eth1 eth2 before openvpn route-up script root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 openvpn server push PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 8.8.8.8,route 172.20.0.1,topology net30,ping 10,ping-restart 120,ifconfig 172.20.0.6 172.20.0.5' openvpn's stock route-up script Apr 24 14:52:06 router daemon.notice openvpn[1768]: /sbin/ifconfig tun11 172.20.0.6 pointopoint 172.20.0.5 mtu 1500 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 72.14.177.29 netmask 255.255.255.255 gw 172.200.0.1 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 172.20.0.1 netmask 255.255.255.255 gw 172.20.0.5 route after openvpn root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.20.0.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun11 72.14.177.29 172.200.0.1 255.255.255.255 UGH 0 0 0 ppp0 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 172.20.0.1 172.20.0.5 255.255.255.255 UGH 0 0 0 tun11 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 128.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 something I had noticed and tried: * on the web interface of openvpn client there is an option "Create NAT on tunnel", if i check this, there is the following script (probably executed after openvpn connection established) root@router:/tmp/home/root# cat /tmp/etc/openvpn/fw/client1-fw.sh #!/bin/sh iptables -I INPUT -i tun11 -j ACCEPT iptables -I FORWARD -i tun11 -j ACCEPT iptables -t nat -I POSTROUTING -s 192.168.1.0/255.255.255.0 -o tun11 -j MASQUERADE if i uncheck this option, the last line will not appear. Then I guess probably the my issue will be solved by iptables and NAT related commands, I just haven't got enough knowledge to figure them out. I tried run iptables -t nat -I POSTROUTING -s 192.168.1.6 -o tun11 -j MASQUERADE manually after openvpn connected (192.168.1.6 is the ip address of my iPad), then my iPad get internet with openvpn tunnel, however all other devices can't reach internet. in case if needed, here is the iptables about NAT root@router:/tmp/home/root# iptables -t nat -L -n Chain PREROUTING (policy ACCEPT) target prot opt source destination DROP all -- 0.0.0.0/0 192.168.1.0/24 WANPREROUTING all -- 0.0.0.0/0 172.200.1.43 upnp all -- 0.0.0.0/0 172.200.1.43 Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 SNAT all -- 192.168.1.0/24 192.168.1.0/24 to:192.168.1.1 Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain WANPREROUTING (1 references) target prot opt source destination DNAT icmp -- 0.0.0.0/0 0.0.0.0/0 to:192.168.1.1 Chain upnp (1 references) target prot opt source destination DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5353 to:192.168.1.3:5353 Thanks in advance for helping and read this so much, I hope i made every info you need to give a help :)

  Read the article

• Using the Data Form Web Part (SharePoint 2010) Site Agnostically!

  - by David Jacobus

  Originally posted on: http://geekswithblogs.net/djacobus/archive/2013/10/24/154465.aspxAs a Developer whom has worked closely with web designers (Power users) in a SharePoint environment, I have come across the issue of making the Data Form Web Part reusable across the site collection! In SharePoint 2007 it was very easy and this blog pointed the way to make it happen: Josh Gaffey's Blog. In SharePoint 2010 something changed! This method failed except for using a Data Form Web Part that pointed to a list in the Site Collection Root! I am making this discussion relative to a developer whom creates a solution (WSP) with all the artifacts embedded and the user shouldn’t have any involvement in the process except to activate features. The Scenario: 1. A Power User creates a Data Form Web Part using SharePoint Designer 2010! It is a great web part the uses all the power of SharePoint Designer and XSLT (Conditional formatting, etc.). 2. Other Users in the site collection want to use that specific web part in sub sites in the site collection. Pointing to a list with the same name, not at the site collection root! The Issues: 1. The Data Form Web Part Data Source uses a List ID (GUID) to point to the specific list. Which means a list in a sub site will have a list with a new GUID different than the one which was created with SharePoint Designer! Obviously, the List needs to be the same List (Fields, Content Types, etc.) with different data. 2. How can we make this web part site agnostic, and dependent only on the lists Name? I had this problem come up over and over and decided to put my solution forward! The Solution: 1. Use the XSL of the Data Form Web Part Created By the Power User in SharePoint Designer! 2. Extend the OOTB Data Form Web Part to use this XSL and Point to a List by name. The solution points to a hybrid solution that requires some coding (Developer) and the XSL (Power User) artifacts put together in a Visual Studio SharePoint Solution. Here are the solution steps in summary: 1. Create an empty SharePoint project in Visual Studio 2. Create a Module and Feature and put the XSL file created by the Power User into it a. Scope the feature to web 3. Create a Feature Receiver to Create the List. The same list from which the Data Form Web Part was created with by the Power User. a. Scope the feature to web 4. Create a Web Part extending the Data Form Web a. Point the Data Form Web Part to point to the List by Name b. Point the Data Form Web Part XSL link to the XSL added using the Module feature c. Scope The feature to Site i. This is because all web parts are in the site collection web part gallery. So in a Narrative Summary: We are creating a list in code which has the same name and (site Columns) as the list from which the Power User created the Data Form Web Part Using SharePoint Designer. We are creating a Web Part in code which extends the OOTB Data Form Web Part to point to a list by name and use the XSL created by the Power User. Okay! Here are the steps with images and code! At the end of this post I will provide a link to the code for a solution which works in any site! I want to TOOT the HORN for the power of this solution! It is the mantra a use with all my clients! What is a basic skill a SharePoint Developer: Create an application that uses the data from a SharePoint list and make that data visible to the user in a manner which meets requirements! Create an Empty SharePoint 2010 Project Here I am naming my Project DJ.DataFormWebPart Create a Code Folder Copy and paste the Extension and Utilities classes (Found in the solution provided at the end of this post) Change the Namespace to match this project The List to which the Data Form Web Part which was used to make the XSL by the Power User in SharePoint Designer is now going to be created in code! If already in code, then all the better! Here I am going to create a list in the site collection root and add some data to it! For the purpose of this discussion I will actually create this list in code before using SharePoint Designer for simplicity! So here I create the List and deploy it within this solution before I do anything else. I will use a List I created before for demo purposes. Footer List is used within the footer of my master page. Add a new Feature: Here I name the Feature FooterList and add a Feature Event Receiver: Here is the code for the Event Receiver: I have a previous blog post about adding lists in code so I will not take time to narrate this code: using System; using System.Runtime.InteropServices; using System.Security.Permissions; using Microsoft.SharePoint; using DJ.DataFormWebPart.Code; namespace DJ.DataFormWebPart.Features.FooterList { /// <summary> /// This class handles events raised during feature activation, deactivation, installation, uninstallation, and upgrade. /// </summary> /// <remarks> /// The GUID attached to this class may be used during packaging and should not be modified. /// </remarks> [Guid("a58644fd-9209-41f4-aa16-67a53af7a9bf")] public class FooterListEventReceiver : SPFeatureReceiver { SPWeb currentWeb = null; SPSite currentSite = null; const string columnGroup = "DJ"; const string ctName = "FooterContentType"; // Uncomment the method below to handle the event raised after a feature has been activated. public override void FeatureActivated(SPFeatureReceiverProperties properties) { using (SPWeb spWeb = properties.GetWeb() as SPWeb) { using (SPSite site = new SPSite(spWeb.Site.ID)) { using (SPWeb rootWeb = site.OpenWeb(site.RootWeb.ID)) { //add the fields addFields(rootWeb); //add content type SPContentType testCT = rootWeb.ContentTypes[ctName]; // we will not create the content type if it exists if (testCT == null) { //the content type does not exist add it addContentType(rootWeb, ctName); } if ((spWeb.Lists.TryGetList("FooterList") == null)) { //create the list if it dosen't to exist CreateFooterList(spWeb, site); } } } } } #region ContentType public void addFields(SPWeb spWeb) { Utilities.addField(spWeb, "Link", SPFieldType.URL, false, columnGroup); Utilities.addField(spWeb, "Information", SPFieldType.Text, false, columnGroup); } private static void addContentType(SPWeb spWeb, string name) { SPContentType myContentType = new SPContentType(spWeb.ContentTypes["Item"], spWeb.ContentTypes, name) { Group = columnGroup }; spWeb.ContentTypes.Add(myContentType); addContentTypeLinkages(spWeb, myContentType); myContentType.Update(); } public static void addContentTypeLinkages(SPWeb spWeb, SPContentType ct) { Utilities.addContentTypeLink(spWeb, "Link", ct); Utilities.addContentTypeLink(spWeb, "Information", ct); } private void CreateFooterList(SPWeb web, SPSite site) { Guid newListGuid = web.Lists.Add("FooterList", "Footer List", SPListTemplateType.GenericList); SPList newList = web.Lists[newListGuid]; newList.ContentTypesEnabled = true; var footer = site.RootWeb.ContentTypes[ctName]; newList.ContentTypes.Add(footer); newList.ContentTypes.Delete(newList.ContentTypes["Item"].Id); newList.Update(); var view = newList.DefaultView; //add all view fields here //view.ViewFields.Add("NewsTitle"); view.ViewFields.Add("Link"); view.ViewFields.Add("Information"); view.Update(); } } } Basically created a content type with two site columns Link and Information. I had to change some code as we are working at the SPWeb level and need Content Types at the SPSite level! I’ll use a new Site Collection for this demo (Best Practice) keep old artifacts from impinging on development: Next we will add this list to the root of the site collection by deploying this solution, add some data and then use SharePoint Designer to create a Data Form Web Part. The list has been added, now let’s add some data: Okay let’s add a Data Form Web Part in SharePoint Designer. Create a new web part page in the site pages library: I will name it TestWP.aspx and edit it in advanced mode: Let’s add an empty Data Form Web Part to the web part zone: Click on the web part to add a data source: Choose FooterList in the Data Source menu: Choose appropriate fields and select insert as multiple item view: Here is what it look like after insertion: Let’s add some conditional formatting if the information filed is not blank: Choose Create (right side) apply formatting: Choose the Information Field and set the condition not null: Click Set Style: Here is the result: Okay! Not flashy but simple enough for this demo. Remember this is the job of the Power user! All we want from this web part is the XLS-Style Sheet out of SharePoint Designer. We are going to use it as the XSL for our web part which we will be creating next. Let’s add a web part to our project extending the OOTB Data Form Web Part. Add new item from the Visual Studio add menu: Choose Web Part: Change WebPart to DataFormWebPart (Oh well my namespace needs some improvement, but it will sure make it readily identifiable as an extended web part!) Below is the code for this web part: using System; using System.ComponentModel; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using Microsoft.SharePoint; using Microsoft.SharePoint.WebControls; using System.Text; namespace DJ.DataFormWebPart.DataFormWebPart { [ToolboxItemAttribute(false)] public class DataFormWebPart : Microsoft.SharePoint.WebPartPages.DataFormWebPart { protected override void OnInit(EventArgs e) { base.OnInit(e); this.ChromeType = PartChromeType.None; this.Title = "FooterListDF"; try { //SPSite site = SPContext.Current.Site; SPWeb web = SPContext.Current.Web; SPList list = web.Lists.TryGetList("FooterList"); if (list != null) { string queryList1 = "<Query><Where><IsNotNull><FieldRef Name='Title' /></IsNotNull></Where><OrderBy><FieldRef Name='Title' Ascending='True' /></OrderBy></Query>"; uint maximumRowList1 = 10; SPDataSource dataSourceList1 = GetDataSource(list.Title, web.Url, list, queryList1, maximumRowList1); this.DataSources.Add(dataSourceList1); this.XslLink = web.Url + "/Assests/Footer.xsl"; this.ParameterBindings = BuildDataFormParameters(); this.DataBind(); } } catch (Exception ex) { this.Controls.Add(new LiteralControl("ERROR: " + ex.Message)); } } private SPDataSource GetDataSource(string dataSourceId, string webUrl, SPList list, string query, uint maximumRow) { SPDataSource dataSource = new SPDataSource(); dataSource.UseInternalName = true; dataSource.ID = dataSourceId; dataSource.DataSourceMode = SPDataSourceMode.List; dataSource.List = list; dataSource.SelectCommand = "" + query + ""; Parameter listIdParam = new Parameter("ListID"); listIdParam.DefaultValue = list.ID.ToString( "B").ToUpper(); Parameter maximumRowsParam = new Parameter("MaximumRows"); maximumRowsParam.DefaultValue = maximumRow.ToString(); QueryStringParameter rootFolderParam = new QueryStringParameter("RootFolder", "RootFolder"); dataSource.SelectParameters.Add(listIdParam); dataSource.SelectParameters.Add(maximumRowsParam); dataSource.SelectParameters.Add(rootFolderParam); dataSource.UpdateParameters.Add(listIdParam); dataSource.DeleteParameters.Add(listIdParam); dataSource.InsertParameters.Add(listIdParam); return dataSource; } private string BuildDataFormParameters() { StringBuilder parameters = new StringBuilder("<ParameterBindings><ParameterBinding Name=\"dvt_apos\" Location=\"Postback;Connection\"/><ParameterBinding Name=\"UserID\" Location=\"CAMLVariable\" DefaultValue=\"CurrentUserName\"/><ParameterBinding Name=\"Today\" Location=\"CAMLVariable\" DefaultValue=\"CurrentDate\"/>"); parameters.Append("<ParameterBinding Name=\"dvt_firstrow\" Location=\"Postback;Connection\"/>"); parameters.Append("<ParameterBinding Name=\"dvt_nextpagedata\" Location=\"Postback;Connection\"/>"); parameters.Append("<ParameterBinding Name=\"dvt_adhocmode\" Location=\"Postback;Connection\"/>"); parameters.Append("<ParameterBinding Name=\"dvt_adhocfiltermode\" Location=\"Postback;Connection\"/>"); parameters.Append("</ParameterBindings>"); return parameters.ToString(); } } } The OnInit method we use to set the list name and the XSL Link property of the Data Form Web Part. We do not have the link to XSL in our Solution so we will add the XSL now: Add a Module in the Visual Studio add menu: Rename Sample.txt in the module to footer.xsl and then copy the XSL from SharePoint Designer Look at elements.xml to where the footer.xsl is being provisioned to which is Assets/footer.xsl, make sure the Web parts xsl link is pointing to this url: Okay we are good to go! Let’s check our features and package: DataFormWebPart should be scoped to site and have the web part: The Footer List feature should be scoped to web and have the Assets module (Okay, I see, a spelling issue but it won’t affect this demo) If everything is correct we should be able to click a couple of sub site feature activations and have our list and web part in a sub site. (In fact this solution can be activated anywhere) Here is the list created at SubSite1 with new data It. Next let’s add the web part on a test page and see if it works as expected: It does! So we now have a repeatable way to use a WSP to move a Data Form Web Part around our sites! Here is a link to the code: DataFormWebPart Solution

  Read the article

• Acer aspire 5735z wireless not working after upgrade to 11.10

  - by Jon

  I cant get my wifi card to work at all after upgrading to 11.10 Oneiric. I'm not sure where to start to fix this. Ive tried using the additional drivers tool but this shows that no additional drivers are needed. Before my upgrade I had a drivers working for the Rt2860 chipset. Any help on this would be much appreciated.... thanks Jon jon@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1d:72:ec:76:d5 inet addr:192.168.1.134 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21d:72ff:feec:76d5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7846 errors:0 dropped:0 overruns:0 frame:0 TX packets:7213 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8046624 (8.0 MB) TX bytes:1329442 (1.3 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:91 errors:0 dropped:0 overruns:0 frame:0 TX packets:91 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:34497 (34.4 KB) TX bytes:34497 (34.4 KB) Ive included by dmesg output below [ 0.428818] NET: Registered protocol family 2 [ 0.429003] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.430562] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.436614] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.437409] TCP: Hash tables configured (established 524288 bind 65536) [ 0.437412] TCP reno registered [ 0.437431] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437482] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437678] NET: Registered protocol family 1 [ 0.437705] pci 0000:00:02.0: Boot video device [ 0.437892] PCI: CLS 64 bytes, default 64 [ 0.437916] Simple Boot Flag at 0x57 set to 0x1 [ 0.438294] audit: initializing netlink socket (disabled) [ 0.438309] type=2000 audit(1319243447.432:1): initialized [ 0.440763] Freeing initrd memory: 13416k freed [ 0.468362] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.488192] VFS: Disk quotas dquot_6.5.2 [ 0.488254] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.488888] fuse init (API version 7.16) [ 0.488985] msgmni has been set to 5890 [ 0.489381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.489413] io scheduler noop registered [ 0.489415] io scheduler deadline registered [ 0.489460] io scheduler cfq registered (default) [ 0.489583] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.489633] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.489699] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.489741] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.489800] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.489841] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.489904] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.489944] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.490006] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.490047] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.490126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.490149] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.490196] intel_idle: MWAIT substates: 0x1110 [ 0.490198] intel_idle: does not run on family 6 model 15 [ 0.491240] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.493473] ACPI: AC Adapter [ADP1] (on-line) [ 0.493590] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.496771] ACPI: Lid Switch [LID0] [ 0.496818] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.496823] ACPI: Sleep Button [SLPB] [ 0.496865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.496869] ACPI: Power Button [PWRF] [ 0.496900] ACPI: acpi_idle registered with cpuidle [ 0.498719] Monitor-Mwait will be used to enter C-1 state [ 0.498753] Monitor-Mwait will be used to enter C-2 state [ 0.498761] Marking TSC unstable due to TSC halts in idle [ 0.517627] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.517630] ACPI: Thermal Zone [TZS0] (67 C) [ 0.524796] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.524799] ACPI: Thermal Zone [TZS1] (67 C) [ 0.524823] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.524852] ERST: Table is not found! [ 0.524948] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.680991] ACPI: Battery Slot [BAT0] (battery present) [ 0.688567] Linux agpgart interface v0.103 [ 0.688672] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.688865] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.689786] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.689912] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.691006] brd: module loaded [ 0.691510] loop: module loaded [ 0.691967] Fixed MDIO Bus: probed [ 0.691990] PPP generic driver version 2.4.2 [ 0.692065] tun: Universal TUN/TAP device driver, 1.6 [ 0.692067] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.692146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.692181] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.692206] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.692210] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.692255] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.692289] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.696181] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.696202] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf8904800 [ 0.712014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.712131] hub 1-0:1.0: USB hub found [ 0.712136] hub 1-0:1.0: 6 ports detected [ 0.712230] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.712243] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.712247] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.712287] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.712315] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.716201] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.716216] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8904c00 [ 0.732014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.732130] hub 2-0:1.0: USB hub found [ 0.732135] hub 2-0:1.0: 6 ports detected [ 0.732209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.732223] uhci_hcd: USB Universal Host Controller Interface driver [ 0.732254] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.732262] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.732265] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.732298] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.732325] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 0.732441] hub 3-0:1.0: USB hub found [ 0.732445] hub 3-0:1.0: 2 ports detected [ 0.732508] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.732514] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.732518] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.732553] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.732577] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 0.732696] hub 4-0:1.0: USB hub found [ 0.732700] hub 4-0:1.0: 2 ports detected [ 0.732762] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.732768] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.732772] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.732805] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.732829] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860 [ 0.732942] hub 5-0:1.0: USB hub found [ 0.732946] hub 5-0:1.0: 2 ports detected [ 0.733007] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.733014] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.733017] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.733057] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.733082] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.733202] hub 6-0:1.0: USB hub found [ 0.733206] hub 6-0:1.0: 2 ports detected [ 0.733265] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.733273] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.733276] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.733313] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.733351] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0 [ 0.733466] hub 7-0:1.0: USB hub found [ 0.733470] hub 7-0:1.0: 2 ports detected [ 0.733532] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.733539] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.733542] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.733578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.733610] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 0.733730] hub 8-0:1.0: USB hub found [ 0.733736] hub 8-0:1.0: 2 ports detected [ 0.733843] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.751594] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.751605] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.751732] mousedev: PS/2 mouse device common for all mice [ 0.752670] rtc_cmos 00:08: RTC can wake from S4 [ 0.752770] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.752796] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.752907] device-mapper: uevent: version 1.0.3 [ 0.752976] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected] [ 0.753028] cpuidle: using governor ladder [ 0.753093] cpuidle: using governor menu [ 0.753096] EFI Variables Facility v0.08 2004-May-17 [ 0.753361] TCP cubic registered [ 0.753482] NET: Registered protocol family 10 [ 0.753966] NET: Registered protocol family 17 [ 0.753992] Registering the dns_resolver key type [ 0.754113] PM: Hibernation image not present or could not be loaded. [ 0.754131] registered taskstats version 1 [ 0.771553] Magic number: 15:152:507 [ 0.771667] rtc_cmos 00:08: setting system clock to 2011-10-22 00:30:48 UTC (1319243448) [ 0.772238] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.772240] EDD information not available. [ 0.774165] Freeing unused kernel memory: 984k freed [ 0.774504] Write protecting the kernel read-only data: 10240k [ 0.774755] Freeing unused kernel memory: 20k freed [ 0.775093] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.779727] Freeing unused kernel memory: 1400k freed [ 0.801946] udevd[84]: starting version 173 [ 0.880950] sky2: driver version 1.28 [ 0.881046] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.881096] sky2 0000:02:00.0: setting latency timer to 64 [ 0.881197] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2 [ 0.881871] sky2 0000:02:00.0: irq 45 for MSI/MSI-X [ 0.896273] sky2 0000:02:00.0: eth0: addr 00:1d:72:ec:76:d5 [ 0.910630] ahci 0000:00:1f.2: version 3.0 [ 0.910647] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.910710] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 0.910775] ahci: SSS flag set, parallel bus scan disabled [ 0.910812] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.910816] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 0.910821] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.941773] scsi0 : ahci [ 0.941954] scsi1 : ahci [ 0.942038] scsi2 : ahci [ 0.942118] scsi3 : ahci [ 0.942196] scsi4 : ahci [ 0.942268] scsi5 : ahci [ 0.942332] ata1: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904100 irq 46 [ 0.942336] ata2: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904180 irq 46 [ 0.942339] ata3: DUMMY [ 0.942340] ata4: DUMMY [ 0.942344] ata5: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904300 irq 46 [ 0.942347] ata6: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904380 irq 46 [ 1.028061] usb 1-5: new high speed USB device number 2 using ehci_hcd [ 1.181775] usbcore: registered new interface driver uas [ 1.260062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.261126] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133 [ 1.261129] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.262360] ata1.00: configured for UDMA/133 [ 1.262518] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5 [ 1.262716] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.262762] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.262824] sd 0:0:0:0: [sda] Write Protect is off [ 1.262827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.262851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.287277] sda: sda1 sda2 sda3 [ 1.287693] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.580059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.581188] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.00, max UDMA/100 [ 1.582663] ata2.00: configured for UDMA/100 [ 1.584162] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT10N 1.00 PQ: 0 ANSI: 5 [ 1.585821] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.585824] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.585953] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.586038] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.632061] usb 6-1: new low speed USB device number 2 using uhci_hcd [ 1.908056] ata5: SATA link down (SStatus 0 SControl 300) [ 2.228065] ata6: SATA link down (SStatus 0 SControl 300) [ 2.228955] Initializing USB Mass Storage driver... [ 2.229052] usbcore: registered new interface driver usb-storage [ 2.229054] USB Mass Storage support registered. [ 2.235827] scsi6 : usb-storage 1-5:1.0 [ 2.235987] usbcore: registered new interface driver ums-realtek [ 2.244451] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4 [ 2.244598] generic-usb 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 2.244620] usbcore: registered new interface driver usbhid [ 2.244622] usbhid: USB HID core driver [ 3.091083] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 3.238275] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 3.348261] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.351897] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 47.138012] udevd[334]: starting version 173 [ 47.177678] lp: driver loaded but no devices found [ 47.197084] wmi: Mapper loaded [ 47.197526] acer_wmi: Acer Laptop ACPI-WMI Extras [ 47.210227] acer_wmi: Brightness must be controlled by generic video driver [ 47.566578] Disabling lock debugging due to kernel taint [ 47.584050] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 47.620666] type=1400 audit(1319239895.347:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=624 comm="apparmor_parser" [ 47.620934] type=1400 audit(1319239895.347:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=624 comm="apparmor_parser" [ 47.621108] type=1400 audit(1319239895.347:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=624 comm="apparmor_parser" [ 47.633056] [drm] Initialized drm 1.1.0 20060810 [ 47.722594] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 47.722602] i915 0000:00:02.0: setting latency timer to 64 [ 47.807152] ndiswrapper (check_nt_hdr:141): kernel is 64-bit, but Windows driver is not 64-bit;bad magic: 010B [ 47.807159] ndiswrapper (load_sys_files:206): couldn't prepare driver 'rt2860' [ 47.807930] ndiswrapper (load_wrap_driver:108): couldn't load driver rt2860; check system log for messages from 'loadndisdriver' [ 47.856250] usbcore: registered new interface driver ndiswrapper [ 47.861772] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 47.861781] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 47.861783] [drm] Driver supports precise vblank timestamp query. [ 47.861842] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 47.980620] fixme: max PWM is zero. [ 48.286153] fbcon: inteldrmfb (fb0) is primary device [ 48.287033] Console: switching to colour frame buffer device 170x48 [ 48.287062] fb0: inteldrmfb frame buffer device [ 48.287064] drm: registered panic notifier [ 48.333883] acpi device:02: registered as cooling_device2 [ 48.334053] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 48.334128] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 48.334203] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 48.334644] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334652] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334673] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 48.334737] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 48.334772] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 48.356107] Adding 261116k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261116k [ 48.380946] hda_codec: ALC268: BIOS auto-probing. [ 48.390242] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 48.390365] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 48.490870] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr [ 48.917990] ppdev: user-space parallel port driver [ 48.950729] type=1400 audit(1319239896.675:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=941 comm="apparmor_parser" [ 48.951114] type=1400 audit(1319239896.675:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=941 comm="apparmor_parser" [ 48.977706] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000 [ 49.048871] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 49.078713] sky2 0000:02:00.0: eth0: enabling interface [ 49.079462] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 50.762266] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 50.762702] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 54.751478] type=1400 audit(1319239902.475:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1039 comm="apparmor_parser" [ 54.755907] type=1400 audit(1319239902.479:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1040 comm="apparmor_parser" [ 54.756237] type=1400 audit(1319239902.483:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1040 comm="apparmor_parser" [ 54.756417] type=1400 audit(1319239902.483:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1040 comm="apparmor_parser" [ 54.764825] type=1400 audit(1319239902.491:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1041 comm="apparmor_parser" [ 54.768365] type=1400 audit(1319239902.495:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1041 comm="apparmor_parser" [ 54.770601] type=1400 audit(1319239902.495:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1041 comm="apparmor_parser" [ 54.770729] type=1400 audit(1319239902.495:14): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1038 comm="apparmor_parser" [ 54.775181] type=1400 audit(1319239902.499:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1043 comm="apparmor_parser" [ 54.775533] type=1400 audit(1319239902.499:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1043 comm="apparmor_parser" [ 54.936691] init: failsafe main process (891) killed by TERM signal [ 54.944583] init: apport pre-start process (1096) terminated with status 1 [ 55.000373] init: apport post-stop process (1160) terminated with status 1 [ 55.005291] init: gdm main process (1159) killed by TERM signal [ 59.782579] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [ 60.992021] eth0: no IPv6 routers present [ 61.936072] device eth0 entered promiscuous mode [ 62.053949] Bluetooth: Core ver 2.16 [ 62.054005] NET: Registered protocol family 31 [ 62.054007] Bluetooth: HCI device and connection manager initialized [ 62.054010] Bluetooth: HCI socket layer initialized [ 62.054012] Bluetooth: L2CAP socket layer initialized [ 62.054993] Bluetooth: SCO socket layer initialized [ 62.058750] Bluetooth: RFCOMM TTY layer initialized [ 62.058758] Bluetooth: RFCOMM socket layer initialized [ 62.058760] Bluetooth: RFCOMM ver 1.11 [ 62.059428] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 62.059432] Bluetooth: BNEP filters: protocol multicast [ 62.460389] init: plymouth-stop pre-start process (1662) terminated with status 1 '

  Read the article

• E.T. Phone "Home" - Hey I've discovered a leak..!

  - by Martin Deh

  Being a member of the WebCenter ATEAM, we are often asked to performance tune a WebCenter custom portal application or a WebCenter Spaces deployment.  Most of the time, the process is pretty much the same.  For example, we often use tools like httpWatch and FireBug to monitor the application, and then perform load tests using JMeter or Selenium.  In addition, there are the fine tuning of the different performance based tuning parameters that are outlined in the documentation and by blogs that have been written by my fellow ATEAMers (click on the "performance" tag in this ATEAM blog).  While performing the load test where the outcome produces a significant reduction in the systems resources (memory), one of the causes that plays a role in memory "leakage" is due to the implementation of the navigation menu UI.  OOTB in both JDeveloper and WebCenter Spaces, there are sample (page) templates that include a "default" navigation menu.  In WebCenter Spaces, this is through the SpacesNavigationModel taskflow region, and in a custom portal (i.e. pageTemplate_globe.jspx) the menu UI is contructed using standard ADF components.  These sample menu UI's basically enable the underlying navigation model to visualize itself to some extent.  However, due to certain limitations of these sample menu implementations (i.e. deeper sub-level of navigations items, look-n-feel, .etc), many customers have developed their own custom navigation menus using a combination of HTML, CSS and JQuery.  While this is supported somewhat by the framework, it is important to know what are some of the best practices in ensuring that the navigation menu does not leak.  In addition, in this blog I will point out a leak (BUG) that is in the sample templates.  OK, E.T. the suspence is killing me, what is this leak? Note: for those who don't know, info on E.T. can be found here In both of the included templates, the example given for handling the navigation back to the "Home" page, will essentially provide a nice little memory leak every time the link is clicked. Let's take a look a simple example, which uses the default template in Spaces. The outlined section below is the "link", which is used to enable a user to navigation back quickly to the Group Space Home page. When you (mouse) hover over the link, the browser displays the target URL. From looking initially at the proposed URL, this is the intended destination.  Note: "home" in this case is the navigation model reference (id), that enables the display of the "pretty URL". Next, notice the current URL, which is displayed in the browser.  Remember, that PortalSiteHome = home.  The other highlighted item adf.ctrl-state, is very important to the framework.  This item is basically a persistent query parameter, which is used by the (ADF) framework to managing the current session and page instance.  Without this parameter present, among other things, the browser back-button navigation will fail.  In this example, the value for this parameter is currently 95K25i7dd_4.  Next, through the navigation menu item, I will click on the Page2 link. Inspecting the URL again, I can see that it reports that indeed the navigation is successful and the adf.ctrl-state is also in the URL.  For those that are wondering why the URL displays Page3.jspx, instead of Page2.jspx. Basically the (file) naming convention for pages created ar runtime in Spaces start at Page1, and then increment as you create additional pages.  The name of the actual link (i.e. Page2) is the page "title" attribute.  So the moral of the story is, unlike design time created pages, run time created pages the name of the file will 99% never match the name that appears in the link. Next, is to click on the quick link for navigating back to the Home page. Quick investigation yields that the navigation was indeed successful.  In the browser's URL there is a home (pretty URL) reference, and there is also a reference to the adf.ctrl-state parameter.  So what's the issue?  Can you remember what the value was for the adf.ctrl-state?  The current value is 3D95k25i7dd_149.  However, the previous value was 95k25i7dd_4.  Here is what happened.  Remember when (mouse) hovering over the link produced the following target URL: http://localhost:8888/webcenter/spaces/NavigationTest/home This is great for the browser as this URL will navigate to the intended targer.  However, what is missing is the adf.ctrl-state parameter.  Since this parameter was not present upon navigation "within" the framework, the ADF framework produced another adf.ctrl-state (object).  The previous adf.ctrl-state basically is orphaned while continuing to be alive in memory.  Note: the auto-creation of the adf.ctrl state does happen initially when you invoke the Spaces application  for the first time.  The following is the line of code which produced the issue: <af:goLink destination="#{boilerBean.globalLogoURIInSpace} ... Here the boilerBean is responsible for returning the "string" url, which in this case is /spaces/NavigationTest/home. Unfortunately, again what is missing is adf.ctrl-state. Note: there are more than one instance of the goLinks in the sample templates. So E.T. how can I correct this? There are 2 simple fixes.  For the goLink's destination, use the navigation model to return the actually "node" value, then use the goLinkPrettyUrl method to add the current adf.ctrl-state: <af:goLink destination="#{navigationContext.defaultNavigationModel.node['home'].goLinkPrettyUrl}"} ... />  Note: the node value is the [navigation model id]  Using a goLink does solve the main issue.  However, since the link basically does a redirect, some browsers like IE will produce a somewhat significant "flash".  In a Spaces application, this may be an annoyance to the users.  Another way to solve the leakage problem, and also remove the flash between navigations is to use a af:commandLink.  For example, here is the code example for this scenario: <af:commandLink id="pt_cl2asf" actionListener="#{navigationContext.processAction}" action="pprnav">    <f:attribute name="node" value="#{navigationContext.defaultNavigationModel.node['home']}"/> </af:commandLink> Here, the navigation node to where home is located is delivered by way of the attribute to the commandLink.  The actual navigation is performed by the processAction, which is needing the "node" value. E.T. OK, you solved the OOTB sample BUG, what about my custom navigation code? I have seen many implementations of creating a navigation menu through custom code.  In addition, there are some blog sites that also give detailed examples.  The majority of these implementations are very similar.  The code usually involves using standard HTML tags (i.e. DIVS, UL, LI, .,etc) and either CSS or JavaScript (JQuery) to produce the flyout/drop-down effect.  The navigation links in these cases are standard <a href... > tags.  Although, this type of approach is not fully accepted by the ADF community, it does work.  The important thing to note here is that the <a> tag value must use the goLinkPrettyURL method of contructing the target URL.  For example: <a href="${contextRoot}${menu.goLinkPrettyUrl}"> The main reason why this type of approach is popular is that links that are created this way (also with using af:goLinks), the pages become crawlable by search engines.  CommandLinks are currently not search friendly.  However, in the case of a Spaces instance this may be acceptable.  So in this use-case, af:commandLinks, which would replace the <a>  (or goLink) tags. The example code given of the af:commandLink above is still valid. One last important item.  If you choose to use af:commandLinks, special attention must be given to the scenario in which java script has been used to produce the flyout effect in the custom menu UI.  In many cases that I have seen, the commandLink can only be invoked once, since there is a conflict between the custom java script with the ADF frameworks own scripting to control the view.  The recommendation here, would be to use a pure CSS approach to acheive the dropdown effects. One very important thing to note.  Due to another BUG, the WebCenter environement must be patched to BP3 (patch  p14076906).  Otherwise the leak is still present using the goLinkPrettyUrl method.  Thanks E.T.!  Now I can phone home and not worry about my application running out of resources due to my custom navigation! 

  Read the article

• IPTables masquerading with one NIC

  - by Tuinslak

  Hi, I am running an OpenVPN server with only one NIC. This is my current layout: public.ip > Cisco firewall > lan.ip > OpenVPN server lan.ip = 192.168.22.70 The Cisco firewall forwards the requests to the oVPN server, thus so far everything works and clients are able to connect. However, all clients connected should be able to access 3 networks: lan1: 192.168.200.0 (vpn lan) > tun0 lan2: 192.168.110.0 (office lan) > eth1 (gw 192.168.22.1) lan3: 192.168.22.0 (server lan) > eth1 (broadcast network) So tun0 is mapped to eth1. Iptables output: # iptables-save # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *filter :INPUT ACCEPT [327:26098] :FORWARD DROP [305:31700] :OUTPUT ACCEPT [291:27378] -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A INPUT -i ! tun0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable -A INPUT -i ! tun0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -d 192.168.200.0/24 -i tun0 -j DROP -A FORWARD -s 192.168.200.0/24 -i tun0 -j ACCEPT -A FORWARD -d 192.168.200.0/24 -i eth1 -j ACCEPT COMMIT # Completed on Wed Feb 16 14:14:20 2011 # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *nat :PREROUTING ACCEPT [302:26000] :POSTROUTING ACCEPT [3:377] :OUTPUT ACCEPT [49:3885] -A POSTROUTING -o eth1 -j MASQUERADE COMMIT # Completed on Wed Feb 16 14:14:20 2011 Yet, clients are unable to ping any ip (including 192.168.200.1, which is the oVPN's IP) When the machine was directly connected to the internet, with 2 NICs, it was quite simply solved with masquerading and adding static routes in the oVPN client's config. However, as masquerading won't accept virtual interfaces (eth0:0, etc) I am unable to get masquerading to work again (and I'm not even sure whether I need virtual interfaces). Thanks. Edit: OpenVPN server: # ifconfig eth1 Link encap:Ethernet HWaddr ba:e6:64:ec:57:ac inet addr:192.168.22.70 Bcast:192.168.22.255 Mask:255.255.255.0 inet6 addr: fe80::b8e6:64ff:feec:57ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6857 errors:0 dropped:0 overruns:0 frame:0 TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:584046 (570.3 KiB) TX bytes:473691 (462.5 KiB) Interrupt:14 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33773 (32.9 KiB) TX bytes:33773 (32.9 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.1 P-t-P:192.168.200.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on a client: # ifconfig eth0 Link encap:Ethernet HWaddr 00:22:64:71:11:56 inet addr:192.168.110.94 Bcast:192.168.110.255 Mask:255.255.255.0 inet6 addr: fe80::222:64ff:fe71:1156/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3466 errors:0 dropped:0 overruns:0 frame:0 TX packets:1838 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:997924 (974.5 KiB) TX bytes:332406 (324.6 KiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:37847 errors:0 dropped:0 overruns:0 frame:0 TX packets:37847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2922444 (2.7 MiB) TX bytes:2922444 (2.7 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.30 P-t-P:192.168.200.29 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:689 errors:0 dropped:18 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:468778 (457.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:db:ae:86 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:704699 errors:0 dropped:0 overruns:0 frame:0 TX packets:730176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:520385963 (496.2 MiB) TX bytes:225210422 (214.7 MiB) static routes line at the end of the client's config (I've been playing around with the 192.168.200.0 -- (un)commenting to see if anything changes): route 192.168.200.0 255.255.255.0 route 192.168.110.0 255.255.255.0 route 192.168.22.0 255.255.255.0 route on a vpn client: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.200.29 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.22.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.200.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.110.1 0.0.0.0 UG 0 0 0 eth0 edit: Weirdly enough, if I set push "redirect-gateway def1" in the server config, (and thus routes all traffic through VPN, which is not what I want), it seems to work.

  Read the article

• When someone deletes a shared data source in SSRS

  - by Rob Farley

  SQL Server Reporting Services plays nicely. You can have things in the catalogue that get shared. You can have Reports that have Links, Datasets that can be used across different reports, and Data Sources that can be used in a variety of ways too. So if you find that someone has deleted a shared data source, you potentially have a bit of a horror story going on. And this works for this month’s T-SQL Tuesday theme, hosted by Nick Haslam, who wants to hear about horror stories. I don’t write about LobsterPot client horror stories, so I’m writing about a situation that a fellow MVP friend asked me about recently instead. The best thing to do is to grab a recent backup of the ReportServer database, restore it somewhere, and figure out what’s changed. But of course, this isn’t always possible. And it’s much nicer to help someone with this kind of thing, rather than to be trying to fix it yourself when you’ve just deleted the wrong data source. Unfortunately, it lets you delete data sources, without trying to scream that the data source is shared across over 400 reports in over 100 folders, as was the case for my friend’s colleague. So, suddenly there’s a big problem – lots of reports are failing, and the time to turn it around is small. You probably know which data source has been deleted, but getting the shared data source back isn’t the hard part (that’s just a connection string really). The nasty bit is all the re-mapping, to get those 400 reports working again. I know from exploring this kind of stuff in the past that the ReportServer database (using its default name) has a table called dbo.Catalog to represent the catalogue, and that Reports are stored here. However, the information about what data sources these deployed reports are configured to use is stored in a different table, dbo.DataSource. You could be forgiven for thinking that shared data sources would live in this table, but they don’t – they’re catalogue items just like the reports. Let’s have a look at the structure of these two tables (although if you’re reading this because you have a disaster, feel free to skim past). Frustratingly, there doesn’t seem to be a Books Online page for this information, sorry about that. I’m also not going to look at all the columns, just ones that I find interesting enough to mention, and that are related to the problem at hand. These fields are consistent all the way through to SQL Server 2012 – there doesn’t seem to have been any changes here for quite a while. dbo.Catalog The Primary Key is ItemID. It’s a uniqueidentifier. I’m not going to comment any more on that. A minor nice point about using GUIDs in unfamiliar databases is that you can more easily figure out what’s what. But foreign keys are for that too… Path, Name and ParentID tell you where in the folder structure the item lives. Path isn’t actually required – you could’ve done recursive queries to get there. But as that would be quite painful, I’m more than happy for the Path column to be there. Path contains the Name as well, incidentally. Type tells you what kind of item it is. Some examples are 1 for a folder and 2 a report. 4 is linked reports, 5 is a data source, 6 is a report model. I forget the others for now (but feel free to put a comment giving the full list if you know it). Content is an image field, remembering that image doesn’t necessarily store images – these days we’d rather use varbinary(max), but even in SQL Server 2012, this field is still image. It stores the actual item definition in binary form, whether it’s actually an image, a report, whatever. LinkSourceID is used for Linked Reports, and has a self-referencing foreign key (allowing NULL, of course) back to ItemID. Parameter is an ntext field containing XML for the parameters of the report. Not sure why this couldn’t be a separate table, but I guess that’s just the way it goes. This field gets changed when the default parameters get changed in Report Manager. There is nothing in dbo.Catalog that describes the actual data sources that the report uses. The default data sources would be part of the Content field, as they are defined in the RDL, but when you deploy reports, you typically choose to NOT replace the data sources. Anyway, they’re not in this table. Maybe it was already considered a bit wide to throw in another ntext field, I’m not sure. They’re in dbo.DataSource instead. dbo.DataSource The Primary key is DSID. Yes it’s a uniqueidentifier... ItemID is a foreign key reference back to dbo.Catalog Fields such as ConnectionString, Prompt, UserName and Password do what they say on the tin, storing information about how to connect to the particular source in question. Link is a uniqueidentifier, which refers back to dbo.Catalog. This is used when a data source within a report refers back to a shared data source, rather than embedding the connection information itself. You’d think this should be enforced by foreign key, but it’s not. It does allow NULLs though. Flags this is an int, and I’ll come back to this. When a Data Source gets deleted out of dbo.Catalog, you might assume that it would be disallowed if there are references to it from dbo.DataSource. Well, you’d be wrong. And not because of the lack of a foreign key either. Deleting anything from the catalogue is done by calling a stored procedure called dbo.DeleteObject. You can look at the definition in there – it feels very much like the kind of Delete stored procedures that many people write, the kind of thing that means they don’t need to worry about allowing cascading deletes with foreign keys – because the stored procedure does the lot. Except that it doesn’t quite do that. If it deleted everything on a cascading delete, we’d’ve lost all the data sources as configured in dbo.DataSource, and that would be bad. This is fine if the ItemID from dbo.DataSource hooks in – if the report is being deleted. But if a shared data source is being deleted, you don’t want to lose the existence of the data source from the report. So it sets it to NULL, and it marks it as invalid. We see this code in that stored procedure. UPDATE [DataSource]    SET       [Flags] = [Flags] & 0x7FFFFFFD, -- broken link       [Link] = NULL FROM    [Catalog] AS C    INNER JOIN [DataSource] AS DS ON C.[ItemID] = DS.[Link] WHERE    (C.Path = @Path OR C.Path LIKE @Prefix ESCAPE '*') Unfortunately there’s no semi-colon on the end (but I’d rather they fix the ntext and image types first), and don’t get me started about using the table name in the UPDATE clause (it should use the alias DS). But there is a nice comment about what’s going on with the Flags field. What I’d LIKE it to do would be to set the connection information to a report-embedded copy of the connection information that’s in the shared data source, the one that’s about to be deleted. I understand that this would cause someone to lose the benefit of having the data sources configured in a central point, but I’d say that’s probably still slightly better than LOSING THE INFORMATION COMPLETELY. Sorry, rant over. I should log a Connect item – I’ll put that on my todo list. So it sets the Link field to NULL, and marks the Flags to tell you they’re broken. So this is your clue to fixing it. A bitwise AND with 0x7FFFFFFD is basically stripping out the ‘2’ bit from a number. So numbers like 2, 3, 6, 7, 10, 11, etc, whose binary representation ends in either 11 or 10 get turned into 0, 1, 4, 5, 8, 9, etc. We can test for it using a WHERE clause that matches the SET clause we’ve just used. I’d also recommend checking for Link being NULL and also having no ConnectionString. And join back to dbo.Catalog to get the path (including the name) of broken reports are – in case you get a surprise from a different data source being broken in the past. SELECT c.Path, ds.Name FROM dbo.[DataSource] AS ds JOIN dbo.[Catalog] AS c ON c.ItemID = ds.ItemID WHERE ds.[Flags] = ds.[Flags] & 0x7FFFFFFD AND ds.[Link] IS NULL AND ds.[ConnectionString] IS NULL; When I just ran this on my own machine, having deleted a data source to check my code, I noticed a Report Model in the list as well – so if you had thought it was just going to be reports that were broken, you’d be forgetting something. So to fix those reports, get your new data source created in the catalogue, and then find its ItemID by querying Catalog, using Path and Name to find it. And then use this value to fix them up. To fix the Flags field, just add 2. I prefer to use bitwise OR which should do the same. Use the OUTPUT clause to get a copy of the DSIDs of the ones you’re changing, just in case you need to revert something later after testing (doing it all in a transaction won’t help, because you’ll just lock out the table, stopping you from testing anything). UPDATE ds SET [Flags] = [Flags] | 2, [Link] = '3AE31CBA-BDB4-4FD1-94F4-580B7FAB939D' /*Insert your own GUID*/ OUTPUT deleted.Name, deleted.DSID, deleted.ItemID, deleted.Flags FROM dbo.[DataSource] AS ds JOIN dbo.[Catalog] AS c ON c.ItemID = ds.ItemID WHERE ds.[Flags] = ds.[Flags] & 0x7FFFFFFD AND ds.[Link] IS NULL AND ds.[ConnectionString] IS NULL; But please be careful. Your mileage may vary. And there’s no reason why 400-odd broken reports needs to be quite the nightmare that it could be. Really, it should be less than five minutes. @rob_farley

  Read the article

• OpenVPN and PPTP on XEN VPS

  - by amiv

  I have Debian based system (Ubuntu 11.10) on XEN VPS. I've installed OpenVPN and works great. I need to install PPTP too, so did it and clients can connect, but they have no internet on client side. If I connect to VPN over PPTP I can ping and access to only my VPS by its IP, but ony that. There's no "internet" on client side. It looks it's not DNS problems (I'm using 8.8.8.8) because I can't ping known IPs. I bet the solution is simple, but don't have any idea. Any guess? /etc/pptpd.conf option /etc/ppp/pptpd-options logwtmp localip 46.38.xx.xx remoteip 10.1.0.1-10 /etc/ppp/pptpd-options name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 8.8.8.8 ms-dns 8.8.4.4 proxyarp nodefaultroute lock nobsdcomp /etc/ppp/ip-up [...] ifconfig ppp0 mtu 1400 /etc/sysctl.conf [...] net.ipv4.ip_forward=1 Command which I run: iptables -t nat -A POSTROUTING -j SNAT --to-source 46.38.xx.xx (IP of my VPS) The client can connect, first one gets IP 10.1.0.1 and DNS from Google. I bet it's iptables problem, am I right? I'm iptables noob and I don't have idea what's wrong. And here's the ifconfig and route command before client connect via PPTP: root@vps3780:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default xx.xx.tel.ru 0.0.0.0 UG 100 0 0 eth0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 46.38.xx.0 * 255.255.255.0 U 0 0 0 eth0 root@vps3780:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:16:3e:56:xx:xx inet addr:46.38.xx.xx Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::216:xx:xx:dfb6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22671 errors:0 dropped:81 overruns:0 frame:0 TX packets:2266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1813358 (1.8 MB) TX bytes:667626 (667.6 KB) Interrupt:24 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:100 errors:0 dropped:0 overruns:0 frame:0 TX packets:100 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10778 (10.7 KB) TX bytes:10778 (10.7 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:602 errors:0 dropped:0 overruns:0 frame:0 TX packets:612 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:90850 (90.8 KB) TX bytes:418904 (418.9 KB) And here's the ifconfig and route command after client connect via PPTP: root@vps3780:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default xx.xx.tel.ru 0.0.0.0 UG 100 0 0 eth0 10.1.0.1 * 255.255.255.255 UH 0 0 0 ppp0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 46.38.xx.0 * 255.255.255.0 U 0 0 0 eth0 root@vps3780:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:16:3e:56:xx:xx inet addr:46.38.xx.xx Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::216:xx:xx:dfb6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22989 errors:0 dropped:82 overruns:0 frame:0 TX packets:2352 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1841310 (1.8 MB) TX bytes:678456 (678.4 KB) Interrupt:24 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:112 errors:0 dropped:0 overruns:0 frame:0 TX packets:112 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12102 (12.1 KB) TX bytes:12102 (12.1 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:46.38.xx.xx P-t-P:10.1.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:66 errors:0 dropped:0 overruns:0 frame:0 TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:10028 (10.0 KB) TX bytes:660 (660.0 B) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:602 errors:0 dropped:0 overruns:0 frame:0 TX packets:612 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:90850 (90.8 KB) TX bytes:418904 (418.9 KB) And ugly iptables --list output: root@vps3780:~# iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable ACCEPT all -- 10.1.0.0/24 anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.1.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable And ugly iptables -t nat -L output: root@vps3780:~# iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination SNAT all -- 10.8.0.0/24 anywhere to:46.38.xx.xx MASQUERADE all -- 10.1.0.0/24 anywhere SNAT all -- 10.1.0.0/24 anywhere to:46.38.xx.xx SNAT all -- 10.8.0.0/24 anywhere to:46.38.xx.xx SNAT all -- 10.1.0.0/24 anywhere to:46.38.xx.xx MASQUERADE all -- anywhere anywhere SNAT all -- anywhere anywhere to:46.38.xx.xx SNAT all -- 10.8.0.0/24 anywhere to:46.38.xx.xx MASQUERADE all -- anywhere anywhere MASQUERADE all -- 10.1.0.0/24 anywhere MASQUERADE all -- anywhere anywhere MASQUERADE all -- 10.1.0.0/24 anywhere As I said - OpenVPN works very good. 10.8.0.0/24 for OpenVPN (on tun0). PPTP won't work. 10.1.0.0/24 for PPTP (on ppp0). Clients can connect, but they haven't "internet". Any suggestions will be appreciated. Second whole day fighting with no results. EDIT: iptables -t filter -F - it resolved my problem :-)

  Read the article

• MSVC Compiler options with mojo-native in Maven

  - by graham.reeds

  I'm trying to set up a test environment with Maven to build VC++ and I am way behind on this. I have 3 source files that I builds a dll (once I get this fixed it should be a simple matter to add the unit-tests): hook.cpp hook.h hook.def This is compiled, on the command line, with the following: C:\Develop\hook\src\main\msvc>cl -o hook.dll Hook.cpp /D HOOK_DLLEXPORT /link /DLL /DEF:"Hook.def" Which produces the expected obj, dll, lib and exp files. So now to get this working in Maven2 with the Mojo-native plugin. With no options Maven w/Mojo gives me this (truncated) output: [INFO] [native:initialize {execution: default-initialize}] [INFO] [native:unzipinc {execution: default-unzipinc}] [INFO] [native:javah {execution: default-javah}] [INFO] [native:compile {execution: default-compile}] [INFO] cmd.exe /X /C "cl -IC:\Develop\hook\src\main\msvc /FoC:\Develop\hook\targ et\objs\Hook.obj -c C:\Develop\hook\src\main\msvc\Hook.cpp" Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 15.00.30729.01 for 80x86 Copyright (C) Microsoft Corporation. All rights reserved. Hook.cpp [INFO] [native:link {execution: default-link}] [INFO] cmd.exe /X /C "link.exe /out:C:\Develop\hook\target\hook.dll target\objs\ Hook.obj" Microsoft (R) Incremental Linker Version 9.00.30729.01 Copyright (C) Microsoft Corporation. All rights reserved. LINK : fatal error LNK1561: entry point must be defined [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Error executing command line. Exit code:1561 mojo-native gives options for manipulating the compiler/linker options but gives no example of usage. No matter what I tweak in these settings I get the error of: [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Failed to configure plugin parameters for: org.codehaus.mojo:native-maven -plugin:1.0-alpha-4 (found static expression: '-o hook.dll Hook.cpp /D HOOK_DLLEXPORT /link /DLL /DEF:"Hook.def"' which may act as a default value). Cause: Cannot assign configuration entry 'compilerStartOptions' to 'interface ja va.util.List' from '-o hook.dll Hook.cpp /D HOOK_DLLEXPORT /link /DLL /DEF:"Hook .def"', which is of type class java.lang.String The relevant part of my pom.xml looks like this: <configuration> <sources> <source> <directory>src/main/msvc</directory> <includes> <include>**/*.cpp</include> </includes> </source> </sources> <compilerProvider>msvc</compilerProvider> <compilerExecutable>cl</compilerExecutable> <!-- cl -o hook.dll Hook.cpp /D HOOK_DLLEXPORT /link /DLL /DEF:"Hook.def" --> <compilerStartOptions>-o hook.dll Hook.cpp /D HOOK_DLLEXPORT /link /DLL /DEF:"Hook.def"</compilerStartOptions> <!-- <compilerMiddleOptions></compilerMiddleOptions> <compilerEndOptions></compilerEndOptions> <linkerStartOptions></linkerStartOptions> <linkerMiddleOptions></linkerMiddleOptions> <linkerEndOptions></linkerEndOptions> --> </configuration> How do I manipulate the compiler to produce a DLL like the command line version does? Or should I give up and just use exec?

  Read the article

• Parsing google feed with linq to xml

  - by the_V

  Hi I'm trying to parse XML feed that I get via Google Contacts API with LINQ 2 XML. That's what feed looks like: <feed xmlns="http://www.w3.org/2005/Atom" xmlns:openSearch="http://a9.com/-/spec/opensearchrss/1.0/" xmlns:gContact="http://schemas.google.com/contact/2008" xmlns:batch="http://schemas.google.com/gdata/batch" xmlns:gd="http://schemas.google.com/g/2005"> <id>[email protected]</id> <updated>2010-06-11T17:37:06.561Z</updated> <category scheme="http://schemas.google.com/g/2005#kind" term="http://schemas.google.com/contact/2008#contact" /> <title type="text">My Contacts</title> <link rel="alternate" type="text/html" href="http://www.google.com/" /> <link rel="http://schemas.google.com/g/2005#feed" type="application/atom+xml" href="http://www.google.com/m8/feeds/contacts/myemailaddress%40gmail.com/full" /> <link rel="http://schemas.google.com/g/2005#post" type="application/atom+xml" href="http://www.google.com/m8/feeds/contacts/myemailaddress%40gmail.com/full" /> <link rel="http://schemas.google.com/g/2005#batch" type="application/atom+xml" href="http://www.google.com/m8/feeds/contacts/myemailaddress%40gmail.com/full/batch" /> <link rel="self" type="application/atom+xml" href="http://www.google.com/m8/feeds/contacts/myemailaddress%40gmail.com/full?max-results=25" /> <author> <name>My NAme</name> <email>[email protected]</email> </author> <generator version="1.0" uri="http://www.google.com/m8/feeds">Contacts</generator> <openSearch:totalResults>19</openSearch:totalResults> <openSearch:startIndex>1</openSearch:startIndex> <openSearch:itemsPerPage>25</openSearch:itemsPerPage> <entry> <id>http://www.google.com/m8/feeds/contacts/myemailaddress%40gmail.com/base/0</id> <updated>2010-01-26T20:34:03.802Z</updated> <category scheme="http://schemas.google.com/g/2005#kind" term="http://schemas.google.com/contact/2008#contact" /> <title type="text">Contact name</title> <link rel="http://schemas.google.com/contacts/2008/rel#edit-photo" type="image/*" href="http://www.google.com/m8/feeds/photos/media/myemailaddress%40gmail.com/0/O-ydnzWMJcfZWqT-6gGetw" /> <link rel="http://schemas.google.com/contacts/2008/rel#photo" type="image/*" href="http://www.google.com/m8/feeds/photos/media/myemailaddress%40gmail.com/0" /> <link rel="self" type="application/atom+xml" href="http://www.google.com/m8/feeds/contacts/myemailaddress%40gmail.com/full/0" /> <link rel="edit" type="application/atom+xml" href="http://www.google.com/m8/feeds/contacts/myemailaddress%40gmail.com/full/0/1264538043802000" /> <gd:email rel="http://schemas.google.com/g/2005#other" address="[email protected]" primary="true" /> </entry> </feed> I've tried a number of things with linq 2 sql, but they didn't work. Even this simple code snipped doesn't work: using (FileStream stream = File.OpenRead("response.xml")) { XmlReader reader = XmlReader.Create(stream); XDocument doc = XDocument.Load(reader); XElement feed = doc.Element("feed"); if (feed == null) { Console.WriteLine("feed not found"); } XElement id = doc.Element("id"); if (id == null) { Console.WriteLine("id is null"); } } Problem is that both id and feed are null here. What wrong am I doing?

  Read the article

• sudo apt-get update errors

  - by Adrian Begi

  Here is what I get on my terminal when running sudo apt-get update errors. I dont know if the issue is from my sources.list or my proxy setup(have not made any changes to proxies). Thank you for any help in advanced. Ign http://security.ubuntu.com oneiric-security Release.gpg Ign http://security.ubuntu.com oneiric-security Release Ign http://security.ubuntu.com oneiric-security/main Sources/DiffIndex Ign http://security.ubuntu.com oneiric-security/restricted Sources/DiffIndex Ign http://security.ubuntu.com oneiric-security/universe Sources/DiffIndex Ign http://security.ubuntu.com oneiric-security/multiverse Sources/DiffIndex Ign http://security.ubuntu.com oneiric-security/main amd64 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/restricted amd64 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/universe amd64 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/multiverse amd64 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/main i386 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/restricted i386 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/universe i386 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/multiverse i386 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/main TranslationIndex Ign http://security.ubuntu.com oneiric-security/multiverse TranslationIndex Ign http://security.ubuntu.com oneiric-security/restricted TranslationIndex Ign http://security.ubuntu.com oneiric-security/universe TranslationIndex Err http://security.ubuntu.com oneiric-security/main Sources 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/restricted Sources 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/universe Sources 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/multiverse Sources 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/main amd64 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/restricted amd64 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/universe amd64 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/multiverse amd64 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/main i386 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/restricted i386 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/universe i386 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/multiverse i386 Packages 404 Not Found [IP: 91.189.91.15 80] Ign http://security.ubuntu.com oneiric-security/main Translation-en_US Ign http://security.ubuntu.com oneiric-security/main Translation-en Ign http://security.ubuntu.com oneiric-security/multiverse Translation-en_US Ign http://security.ubuntu.com oneiric-security/multiverse Translation-en Ign http://security.ubuntu.com oneiric-security/restricted Translation-en_US Ign http://security.ubuntu.com oneiric-security/restricted Translation-en Ign http://security.ubuntu.com oneiric-security/universe Translation-en_US Ign http://security.ubuntu.com oneiric-security/universe Translation-en W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/main/source/Sources 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/restricted/source/Sources 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/universe/source/Sources 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/multiverse/source/Sources 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/main/binary-amd64/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/restricted/binary-amd64/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/universe/binary-amd64/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/multiverse/binary-amd64/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/main/binary-i386/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/restricted/binary-i386/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/universe/binary-i386/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/multiverse/binary-i386/Packages 404 Not Found [IP: 91.189.91.15 80] E: Some index files failed to download. They have been ignored, or old ones used instead. HERE IS MY SOURCES.LIST # # deb cdrom:[Ubuntu-Server 11.10 _Oneiric Ocelot_ - Release amd64 (20111011)]/ dists/oneiric/main/binary-i386/ # deb cdrom:[Ubuntu-Server 11.10 _Oneiric Ocelot_ - Release amd64 (20111011)]/ dists/oneiric/restricted/binary-i386/ # deb cdrom:[Ubuntu-Server 11.10 _Oneiric Ocelot_ - Release amd64 (20111011)]/ oneiric main restricted #deb cdrom:[Ubuntu-Server 11.10 _Oneiric Ocelot_ - Release amd64 (20111011)]/ dists/oneiric/main/binary-i386/ #deb cdrom:[Ubuntu-Server 11.10 _Oneiric Ocelot_ - Release amd64 (20111011)]/ dists/oneiric/restricted/binary-i386/ #deb cdrom:[Ubuntu-Server 11.10 _Oneiric Ocelot_ - Release amd64 (20111011)]/ oneiric main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://us.archive.ubuntu.com/ubuntu/ oneiric main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://us.archive.ubuntu.com/ubuntu/ oneiric-updates main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://us.archive.ubuntu.com/ubuntu/ oneiric universe deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric universe deb http://us.archive.ubuntu.com/ubuntu/ oneiric-updates universe deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://us.archive.ubuntu.com/ubuntu/ oneiric multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric multiverse deb http://us.archive.ubuntu.com/ubuntu/ oneiric-updates multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://us.archive.ubuntu.com/ubuntu/ oneiric-backports main restricted universe multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric-backports main restricted universe multiverse deb http://security.ubuntu.com/ubuntu oneiric-security main restricted deb-src http://security.ubuntu.com/ubuntu oneiric-security main restricted deb http://security.ubuntu.com/ubuntu oneiric-security universe deb-src http://security.ubuntu.com/ubuntu oneiric-security universe deb http://security.ubuntu.com/ubuntu oneiric-security multiverse deb-src http://security.ubuntu.com/ubuntu oneiric-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu oneiric partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## Uncomment the following two lines to add software from Ubuntu's ## 'extras' repository. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu oneiric main # deb-src http://extras.ubuntu.com/ubuntu oneiric main

  Read the article

• Problem with hadoop start-dfs.sh

  - by user288501

  I installed and configured hadoop on my Ubuntu 14.04 server, virtualized inside of hyper-v, however I am getting an issue when i run start-dfs.sh root@sUbuntu01:/var/log# start-dfs.sh 14/06/04 15:27:08 WARN util.NativeCodeLoader: Unable to load native-hadoop library for your platform... using builtin-java classes where applicable Starting namenodes on [OpenJDK 64-Bit Server VM warning: You have loaded library /usr/local/hadoop/lib/native/libhadoop.so.1.0.0 which might have disabled stack guard. The VM will try to fix the stack guard now. It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'. localhost] sed: -e expression #1, char 6: unknown option to `s' -c: Unknown cipher type 'cd' localhost: Ubuntu 14.04 LTS localhost: starting namenode, logging to /usr/local/hadoop/logs/hadoop-root-namenode-sUbuntu01.out noexecstack'.: ssh: Could not resolve hostname noexecstack'.: Name or service not known '-z: ssh: Could not resolve hostname '-z: Name or service not known 'execstack: ssh: Could not resolve hostname 'execstack: Name or service not known disabled: ssh: Could not resolve hostname disabled: Name or service not known with: ssh: Could not resolve hostname with: Name or service not known have: ssh: Could not resolve hostname have: Name or service not known VM: ssh: Could not resolve hostname vm: Name or service not known stack: ssh: Could not resolve hostname stack: Name or service not known guard: ssh: Could not resolve hostname guard: Name or service not known fix: ssh: Could not resolve hostname fix: Name or service not known VM: ssh: Could not resolve hostname vm: Name or service not known the: ssh: Could not resolve hostname the: Name or service not known to: ssh: Could not resolve hostname to: Name or service not known warning:: ssh: Could not resolve hostname warning:: Name or service not known it: ssh: Could not resolve hostname it: Name or service not known now.: ssh: Could not resolve hostname now.: Name or service not known library: ssh: Could not resolve hostname library: Name or service not known will: ssh: Could not resolve hostname will: Name or service not known link: ssh: Could not resolve hostname link: Name or service not known or: ssh: Could not resolve hostname or: Name or service not known It's: ssh: Could not resolve hostname it's: Name or service not known <libfile>',: ssh: Could not resolve hostname <libfile>',: Name or service not known which: ssh: connect to host which port 22: Connection timed out have: ssh: connect to host have port 22: Connection timed out you: ssh: connect to host you port 22: Connection timed out try: ssh: connect to host try port 22: Connection timed out the: ssh: connect to host the port 22: Connection timed out highly: ssh: connect to host highly port 22: Connection timed out might: ssh: connect to host might port 22: Connection timed out loaded: ssh: connect to host loaded port 22: Connection timed out You: ssh: connect to host you port 22: Connection timed out guard.: ssh: connect to host guard. port 22: Connection timed out library: ssh: connect to host library port 22: Connection timed out Server: ssh: connect to host server port 22: Connection timed out fix: ssh: connect to host fix port 22: Connection timed out The: ssh: connect to host the port 22: Connection timed out recommended: ssh: connect to host recommended port 22: Connection timed out that: ssh: connect to host that port 22: Connection timed out stack: ssh: connect to host stack port 22: Connection timed out OpenJDK: ssh: connect to host openjdk port 22: Connection timed out 64-Bit: ssh: connect to host 64-bit port 22: Connection timed out with: ssh: connect to host with port 22: Connection timed out localhost: Ubuntu 14.04 LTS localhost: starting datanode, logging to /usr/local/hadoop/logs/hadoop-root-datanode-sUbuntu01.out localhost: OpenJDK 64-Bit Server VM warning: You have loaded library /usr/local/hadoop/lib/native/libhadoop.so.1.0.0 which might have disabled stack guard. The VM will try to fix the stack guard now. localhost: It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'. Starting secondary namenodes [OpenJDK 64-Bit Server VM warning: You have loaded library /usr/local/hadoop/lib/native/libhadoop.so.1.0.0 which might have disabled stack guard. The VM will try to fix the stack guard now. It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'. 0.0.0.0] sed: -e expression #1, char 6: unknown option to `s' warning:: ssh: Could not resolve hostname warning:: Name or service not known -c: Unknown cipher type 'cd' It's: ssh: Could not resolve hostname it's: Name or service not known 'execstack: ssh: Could not resolve hostname 'execstack: Name or service not known '-z: ssh: Could not resolve hostname '-z: Name or service not known 0.0.0.0: Ubuntu 14.04 LTS 0.0.0.0: starting secondarynamenode, logging to /usr/local/hadoop/logs/hadoop-root-secondarynamenode-sUbuntu01.out 0.0.0.0: OpenJDK 64-Bit Server VM warning: You have loaded library /usr/local/hadoop/lib/native/libhadoop.so.1.0.0 which might have disabled stack guard. The VM will try to fix the stack guard now. 0.0.0.0: It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'. noexecstack'.: ssh: Could not resolve hostname noexecstack'.: Name or service not known <libfile>',: ssh: Could not resolve hostname <libfile>',: Name or service not known link: ssh: Could not resolve hostname link: No address associated with hostname it: ssh: Could not resolve hostname it: No address associated with hostname to: ssh: connect to host to port 22: Connection timed out or: ssh: connect to host or port 22: Connection timed out you: ssh: connect to host you port 22: Connection timed out guard.: ssh: connect to host guard. port 22: Connection timed out VM: ssh: connect to host vm port 22: Connection timed out stack: ssh: connect to host stack port 22: Connection timed out library: ssh: connect to host library port 22: Connection timed out Server: ssh: connect to host server port 22: Connection timed out might: ssh: connect to host might port 22: Connection timed out stack: ssh: connect to host stack port 22: Connection timed out You: ssh: connect to host you port 22: Connection timed out now.: ssh: connect to host now. port 22: Connection timed out disabled: ssh: connect to host disabled port 22: Connection timed out have: ssh: connect to host have port 22: Connection timed out will: ssh: connect to host will port 22: Connection timed out The: ssh: connect to host the port 22: Connection timed out have: ssh: connect to host have port 22: Connection timed out try: ssh: connect to host try port 22: Connection timed out the: ssh: connect to host the port 22: Connection timed out guard: ssh: connect to host guard port 22: Connection timed out the: ssh: connect to host the port 22: Connection timed out recommended: ssh: connect to host recommended port 22: Connection timed out with: ssh: connect to host with port 22: Connection timed out library: ssh: connect to host library port 22: Connection timed out 64-Bit: ssh: connect to host 64-bit port 22: Connection timed out fix: ssh: connect to host fix port 22: Connection timed out which: ssh: connect to host which port 22: Connection timed out VM: ssh: connect to host vm port 22: Connection timed out OpenJDK: ssh: connect to host openjdk port 22: Connection timed out fix: ssh: connect to host fix port 22: Connection timed out highly: ssh: connect to host highly port 22: Connection timed out that: ssh: connect to host that port 22: Connection timed out with: ssh: connect to host with port 22: Connection timed out loaded: ssh: connect to host loaded port 22: Connection timed out 14/06/04 15:36:02 WARN util.NativeCodeLoader: Unable to load native-hadoop library for your platform... using builtin-java classes where applicable Any advice?

  Read the article

• Fan running continously on HP Pavillion G6 notebook with 12.04.1 LTS, help please?

  - by Ankit

  Fan is running continously on my HP Pavillion G6 notebook with 12.04.1 LTS. My system specifications are:- Ram: 6Gb Graphics Card:- 1 GB (AMD Raedon 64XX). HDD: 540 GB. Please find a list of ACPI errors logs from dmesg as follows:- buffer@ankit:~$ dmesg | grep ACPI -i [ 0.000000] BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data) [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000009cffe120 00084 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000009cfec000 0C132 (v01 HP 1670 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 000000009cf6c000 00040 [ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfea000 00D52 (v01 HP 1670 00001000 MSFT 01000013) [ 0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfe4000 00780 (v01 HP 1670 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP 1670 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfdd000 0219F (v01 HP 1670 00001000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.005902] ACPI: Core revision 20110623 [ 0.536006] PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes) [ 0.538423] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.538429] ACPI: bus type pci registered [ 0.656088] ACPI: Added _OSI(Module Device) [ 0.656094] ACPI: Added _OSI(Processor Device) [ 0.656098] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.656103] ACPI: Added _OSI(Processor Aggregator Device) [ 0.660335] ACPI: EC: Look up EC in DSDT [ 0.664416] ACPI: Executed 1 blocks of module-level executable AML code [ 0.728303] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.729536] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.730622] ACPI: Dynamic OEM Table Load: [ 0.730630] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.760829] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.761992] ACPI: Dynamic OEM Table Load: [ 0.761998] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.792451] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.793521] ACPI: Dynamic OEM Table Load: [ 0.793528] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.872981] ACPI: Interpreter enabled [ 0.872992] ACPI: (supports S0 S3 S4 S5) [ 0.873064] ACPI: Using IOAPIC for interrupt routing [ 0.882723] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.883072] ACPI: No dock devices found. [ 0.883084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.883882] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.924187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.924509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.924581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.924659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.924758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.924973] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.925064] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.925069] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.930212] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930327] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930436] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930547] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.930655] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.930764] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.930873] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930979] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.932142] PCI: Using ACPI for IRQ routing [ 0.967119] pnp: PnP ACPI init [ 0.967151] ACPI: bus type pnp registered [ 0.968356] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.968516] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.968586] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.968818] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.968915] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.969206] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.969293] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.969418] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.969528] pnp 00:08: Plug and Play ACPI device, IDs SYN1e3f SYN1e00 SYN0002 PNP0f13 (active) [ 0.969969] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.970574] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.970617] pnp: PnP ACPI: found 11 devices [ 0.970622] ACPI: ACPI bus type pnp unregistered [ 1.138064] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.138331] ACPI: AC Adapter [ACAD] (off-line) [ 1.139068] ACPI: Lid Switch [LID0] [ 1.139176] ACPI: Power Button [PWRB] [ 1.139286] ACPI: Power Button [PWRF] [ 1.144637] ACPI: Thermal Zone [TZ01] (0 C) [ 1.144677] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.144693] ACPI: Battery Slot [BAT0] (battery present) [ 1.206926] ACPI: Battery Slot [BAT0] (battery present) [ 13.176993] acpi device:1a: registered as cooling_device4 [ 13.179931] acpi device:1b: registered as cooling_device5 [ 13.180221] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 13.219589] acpi device:20: registered as cooling_device6 [ 13.220851] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1649.915134] i8042 aux 00:08: wake-up capability disabled by ACPI [ 1649.915147] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 1650.931028] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 1650.954743] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 1650.978733] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 1651.010950] ACPI: Preparing to enter system sleep state S3 [ 1652.251505] ACPI: Low-level resume complete [ 1652.360953] ACPI: Waking up from system sleep state S3 [ 1652.427581] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 1652.435579] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 1652.437887] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 1652.506660] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 1661.238234] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 1661.238253] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 1661.238268] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [ 3151.784288] i8042 aux 00:08: wake-up capability disabled by ACPI [ 3151.784301] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 3152.797676] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 3152.821379] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 3152.845367] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 3152.877600] ACPI: Preparing to enter system sleep state S3 [ 3154.313213] ACPI: Low-level resume complete [ 3154.422297] ACPI: Waking up from system sleep state S3 [ 3154.489692] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 3154.497667] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 3154.505947] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 3154.568985] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 3162.745149] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 3162.745168] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 3162.745183] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [ 6775.723501] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 6775.723519] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 6775.723535] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [10388.004760] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [10388.004778] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [10388.004801] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [10723.591930] i8042 aux 00:08: wake-up capability disabled by ACPI [10723.591942] i8042 kbd 00:07: wake-up capability enabled by ACPI [10724.607624] r8169 0000:03:00.0: wake-up capability enabled by ACPI [10724.631349] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [10724.655339] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [10724.687572] ACPI: Preparing to enter system sleep state S3 [10726.123176] ACPI: Low-level resume complete [10726.232181] ACPI: Waking up from system sleep state S3 [10726.303653] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [10726.311648] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [10726.315734] r8169 0000:03:00.0: wake-up capability disabled by ACPI [10726.379287] i8042 kbd 00:07: wake-up capability disabled by ACPI [10734.393523] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [10734.393542] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [10734.393557] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/ps Continuous sound from the fan is very annoying, any help would highly appreciated.

  Read the article

• OpenCV install problems on Studio 12.04 - broken dependencies

  - by Will

  I'm trying to follow the Ubuntu OpenCV documentation at OpenCV. The provided script has a line which executed for some time, taking away more packages than I expected (such as ubuntu-studio video); sudo apt-get -qq remove ffmpeg x264 libx264-dev When the script gets to the line below, it bombs; sudo apt-get -qq install libopencv-dev build-essential checkinstall cmake pkg-config yasm libtiff4-dev libjpeg-dev libjasper-dev libavcodec-dev libavformat-dev libswscale-dev libdc1394-22-dev libxine-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libv4l-dev python-dev python-numpy libtbb-dev libqt4-dev libgtk2.0-dev libfaac-dev libmp3lame-dev libopencore-amrnb-dev libopencore-amrwb-dev libtheora-dev libvorbis-dev libxvidcore-dev x264 v4l-utils ffmpeg The error msg is; E: Unable to correct problems, you have held broken packages. I've since run Update-Manager, run sudo apt-get updates, rebooted, tried the above script line manually, and still no change. I've just run sudo apt-get install -f and nothing seemed to change. It did mention that some packages were no longer needed and could be removed by apt-get autoremove, so I ran that. It removed a number of packages, so I reran the install command above. Still same problem of held broken packages. I just ran sudo apt-get -u dist-upgrade Part of the response was; The following packages have been kept back: gstreamer0.10-ffmpeg I'm not sure what that means. I do know that it shows up in my Update-Manager and cannot be checked I then ran sudo dpkg --configure -a and then reran sudo apt-get -f install and the package was still not upgraded, though there was this very interesting comment; Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gstreamer0.10-ffmpeg : Depends: libavcodec53 (< 5:0) but it is not going to be installed or libavcodec-extra-53 (< 5:0) but 5:0.7.2-1ubuntu1+codecs1~oneiric2 is to be installed E: Unable to correct problems, you have held broken packages. Then I ran sudo apt-get -u dist-upgrade It showed I had one held package, so I ran; sudo apt-get -o Debug::pkgProblemResolver=yes dist-upgrade It also exited without upgrading the package, so I ran; sudo apt-get remove --dry-run gstreamer0.10-ffmpeg:i386 And it gave me; *The following packages will be REMOVED: arista gstreamer0.10-ffmpeg 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. Remv arista [0.9.7-3ubuntu1] Remv gstreamer0.10-ffmpeg [0.10.12-1ubuntu1]* But when I reran sudo apt-get -u dist-upgrade It showed the package was still there. *The following packages have been kept back: gstreamer0.10-ffmpeg 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.* Update: Just went into Synaptic PM and completely removed gstreamer0.10-ffmpeg Reran sudo apt-get -u dist-upgrade And was told; 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. However, when I ran the original apt-get to install opencv (first code at the top of this question), it still gave me the same broken package errors. So I tried $ cat /etc/apt/sources.list # # deb cdrom:[Ubuntu-Studio 11.10 _Oneiric Ocelot_ - Release i386 (20111011.1)]/ oneiric main multiverse restricted universe # deb cdrom:[Ubuntu-Studio 11.10 _Oneiric Ocelot_ - Release i386 (20111011.1)]/ oneiric main multiverse restricted universe # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://us.archive.ubuntu.com/ubuntu/ precise main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://us.archive.ubuntu.com/ubuntu/ precise universe deb-src http://us.archive.ubuntu.com/ubuntu/ precise universe deb http://us.archive.ubuntu.com/ubuntu/ precise-updates universe deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://us.archive.ubuntu.com/ubuntu/ precise multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ precise multiverse deb http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://security.ubuntu.com/ubuntu precise-security main restricted deb-src http://security.ubuntu.com/ubuntu precise-security main restricted deb http://security.ubuntu.com/ubuntu precise-security universe deb-src http://security.ubuntu.com/ubuntu precise-security universe deb http://security.ubuntu.com/ubuntu precise-security multiverse deb-src http://security.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## Uncomment the following two lines to add software from Ubuntu's ## 'extras' repository. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu oneiric main # deb-src http://extras.ubuntu.com/ubuntu oneiric main # deb http://download.opensuse.org/repositories/home:/popinet/xUbuntu_11.04 ./ # disabled on upgrade to precise and then; $ cat /etc/apt/sources.list.d/* But I don't have enough reputation to post the results here (it says I need at least 10 reputation points to post more than 2 links), so I don't know how to provide the requested feedback. Then tried; $ sudo apt-get check [sudo] password for <abcd>: Reading package lists... Done Building dependency tree Reading state information... Done However, no resolution of the problem yet. What else do I need to do? Will an upgrade to Ubuntu Studio 13.xx solve this problem (or compound it)?

  Read the article

• Can you help me fix my broken packages?

  - by Andreas Hartmann

  I would like to upgrade from 13.04 to 13.10, but some broken packages are preventing upgrade success: grep Broken /var/log/dist-upgrade/apt.log output: Broken libwayland-client0:amd64 Conflicts on libwayland0 [ amd64 ] < 1.0.5-0ubuntu1 > ( libs ) (< 1.1.0) Broken libunity9:amd64 Breaks on unity-common [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 > ( gnome ) (< 7.1.2) Broken cups-filters:amd64 Conflicts on ghostscript-cups [ amd64 ] < 9.07~dfsg2-0ubuntu3.1 > ( text ) Broken libpam-systemd:amd64 Conflicts on libpam-xdg-support [ amd64 ] < 0.2-0ubuntu2 > ( admin ) Broken libharfbuzz0a:amd64 Breaks on libharfbuzz0 [ amd64 ] < 0.9.13-1 > ( libs ) Broken libharfbuzz0a:amd64 Breaks on libharfbuzz0 [ i386 ] < 0.9.13-1 > ( libs ) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ amd64 ] < 6.90.2daily13.04.05-0ubuntu1 > ( gnome ) (< 7.0.7) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ i386 ] < none > ( none ) (< 7.0.7) Broken libaccount-plugin-generic-oauth:amd64 Conflicts on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken libaccount-plugin-generic-oauth:amd64 Breaks on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken libmutter0b:amd64 Breaks on libmutter0a [ amd64 ] < 3.6.3-0ubuntu2 > ( libs ) Broken python3-aptdaemon.pkcompat:amd64 Breaks on libpackagekit-glib2-14 [ amd64 ] < 0.7.6-3ubuntu1 > ( libs ) (<= 0.7.6-4) Broken apache2:amd64 Conflicts on apache2.2-common [ amd64 ] < 2.2.22-6ubuntu5.1 > ( httpd ) Broken chromium-codecs-ffmpeg-extra:amd64 Conflicts on chromium-codecs-ffmpeg [ amd64 ] < 28.0.1500.71-0ubuntu1.13.04.1 -> 29.0.1547.65-0ubuntu2 > ( universe/web ) Broken unity-scope-home:amd64 Conflicts on unity-lens-shopping [ amd64 ] < 6.8.0daily13.03.04-0ubuntu1 > ( gnome ) Broken libsnmp30:amd64 Breaks on libsnmp15 [ amd64 ] < 5.4.3~dfsg-2.7ubuntu1 > ( libs ) Broken apache2.2-bin:amd64 Breaks on gnome-user-share [ amd64 ] < 3.0.4-0ubuntu1 > ( gnome ) (< 3.8.0-2~) Broken libgjs0d:amd64 Conflicts on libgjs0c [ amd64 ] < 1.34.0-0ubuntu1 > ( libs ) Broken unity-gtk2-module:amd64 Conflicts on appmenu-gtk [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken lib32asound2:amd64 Depends on libasound2 [ amd64 ] < 1.0.25-4ubuntu3.1 -> 1.0.27.2-1ubuntu6 > ( libs ) (= 1.0.25-4ubuntu3.1) Broken unity-gtk3-module:amd64 Conflicts on appmenu-gtk3 [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken activity-log-manager:amd64 Conflicts on activity-log-manager-common [ amd64 ] < 0.9.4-0ubuntu6.2 > ( utils ) Broken libgtksourceview-3.0-0:amd64 Depends on libgtksourceview-3.0-common [ amd64 ] < 3.6.3-0ubuntu1 -> 3.8.2-0ubuntu1 > ( libs ) (< 3.7) Broken icaclient:amd64 Depends on lib32asound2 [ amd64 ] < 1.0.25-4ubuntu3.1 > ( libs ) Broken libunity-core-6.0-5:amd64 Depends on unity-services [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 -> 7.1.2+13.10.20131014.1-0ubuntu1 > ( gnome ) (= 7.0.0daily13.06.19~13.04-0ubuntu1) Broken libbamf3-1:amd64 Depends on bamfdaemon [ amd64 ] < 0.4.0daily13.06.19~13.04-0ubuntu1 -> 0.5.1+13.10.20131011-0ubuntu1 > ( libs ) (= 0.4.0daily13.06.19~13.04-0ubuntu1) Broken apache2-bin:amd64 Conflicts on apache2.2-bin [ amd64 ] < 2.2.22-6ubuntu5.1 -> 2.4.6-2ubuntu2 > ( httpd ) (< 2.3~) Output for cat /etc/apt/sources.list /etc/apt/sources.list.d/*.list # deb cdrom:[Ubuntu 13.04 _Raring Ringtail_ - Release amd64 (20130424)]/ raring main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://de.archive.ubuntu.com/ubuntu/ raring main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://de.archive.ubuntu.com/ubuntu/ raring-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://de.archive.ubuntu.com/ubuntu/ raring universe deb http://de.archive.ubuntu.com/ubuntu/ raring-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://de.archive.ubuntu.com/ubuntu/ raring multiverse deb http://de.archive.ubuntu.com/ubuntu/ raring-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://security.ubuntu.com/ubuntu raring-security main restricted deb http://security.ubuntu.com/ubuntu raring-security universe deb http://security.ubuntu.com/ubuntu raring-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu raring partner # deb-src http://archive.canonical.com/ubuntu raring partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu raring main # deb-src http://extras.ubuntu.com/ubuntu raring main # deb http://linux.dropbox.com/ubuntu precise main output for sudo dpkg -l | grep -e "^iU" -e "^rc": rc ibm-lotus-cae 8.5.2-20100805.0821 i386 IBM Lotus Composite Application Editor rc ibm-lotus-cae-nl1 8.5.2-20100805.0821 i386 IBM Lotus CAE NL1 rc ibm-lotus-feedreader 8.5.2-20100805.0821 i386 Feeds for IBM Lotus Notes 8.5.2 rc ibm-lotus-feedreader-nl1 8.5.2-20100805.0821 i386 IBM Lotus Feed Reader NL1 rc ibm-lotus-notes 8.5.2-20100805.0821 i386 IBM Lotus Notes rc ibm-lotus-notes-core-de 8.5.2-20100805.0821 i386 IBM Lotus Notes Native German (de) rc ibm-lotus-notes-nl1 8.5.2-20100805.0821 i386 IBM Lotus Notes Java NL1 rc ibm-lotus-sametime 8.5.2-20100805.0821 i386 IBM Lotus Sametime rc ibm-lotus-symphony 8.5.2-20100805.0821 i386 IBM Lotus Symphony rc ibm-lotus-symphony-nl1 8.5.2-20100805.0821 i386 IBM Lotus Symphony NL1 rc libapache2-mod-php5filter 5.4.9-4ubuntu2.2 amd64 server-side, HTML-embedded scripting language (apache 2 filter module) rc libavcodec53:amd64 6:0.8.6-1ubuntu2 amd64 Libav codec library rc libavutil51:amd64 6:0.8.6-1ubuntu2 amd64 Libav utility library rc libmotif4:amd64 2.3.3-7ubuntu1 amd64 Open Motif - shared libraries rc linux-image-3.8.0-25-generic 3.8.0-25.37 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-25-generic 3.8.0-25.37 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP

  Read the article

• VPN still working after rebooting without client - DrayTek client shows "No Connection"

  - by HeavenCore

  My home network is a simple router + pc's setup, nothing fancy - the router has DHCP enabled for 192.168.0.X (255.255.255.0) and my PC picks up the address 192.168.0.82. There are no devices on my local lan in the 192.168.1.x range. On my pc i have the DrayTek VPN client, and a company i do some work for has a DrayTek Vigor router. The VPN client establishes a VPN to that remote company using an IPSec Tunnel (PreShared Key - no encryption) Last night i shut down my pc with the VPN tunnel still connected, when i turned my computer on this morning i accidentally clicked an RDP shortcut to 192.168.1.2 (a host in the remote company) and to my amazement it connected?!? I checked and the DrayTek VPN client isnt running, and when i did run it, it clearly shows "Status: No connection". confused as to how my machine can still talk to this remote machine i tried a trace: C:\Users\HeavenCore>tracert 192.168.1.2 Tracing route to C4SERVERII [192.168.1.2] over a maximum of 30 hops: 1 * * * Request timed out. 2 * * * Request timed out. 3 * * * Request timed out. 4 * * * Request timed out. 5 * * * Request timed out. 6 * * * Request timed out. 7 * * * Request timed out. 8 * * * Request timed out. 9 * * * Request timed out. 10 * * * Request timed out. 11 * * * Request timed out. 12 15 ms 21 ms 32 ms C4SERVERII [192.168.1.2] Trace complete. No indication there as to how it's getting from my network to the remote host. with my network mask being 255.255.255.0 with ip 192.168.0.1 i dont even see how packets are routing to 192.168.1.1 - unless there was a static route in place, so i checked the route table: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.82 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.82 266 192.168.0.82 255.255.255.255 On-link 192.168.0.82 266 192.168.0.255 255.255.255.255 On-link 192.168.0.82 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.82 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.0.82 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.1 Default =========================================================================== As far as i can see, nothing indicating how my packets are getting to 192.168.1.2??? To confirm i was on a different subnet i did an ipconfig /all: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ether net Controller Physical Address. . . . . . . . . : 00-23-54-F3-4E-BA DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.82(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 208.67.222.222 NetBIOS over Tcpip. . . . . . . . : Enabled Yet straight after confirming my ip and subnet as above i can go ahead and ping the remote machine: C:\Users\HeavenCore>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.2: bytes=32 time=48ms TTL=127 Reply from 192.168.1.2: bytes=32 time=23ms TTL=127 Reply from 192.168.1.2: bytes=32 time=103ms TTL=127 Reply from 192.168.1.2: bytes=32 time=25ms TTL=127 Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 23ms, Maximum = 103ms, Average = 49ms Also, note on the ping how the times are 35ms ish, this clearly shows the pings are to the remote host and not something on my local lan (all stuff on my local lan pings in 0ms) - plus i verified the host was actually the host via RDP. My Question: Can an IPSec tunnel stay up some how after a reboot without use of the VPN client? (well, i can clearly see that it can) - where in windows is there visibility of this? how does my machine know where to route the packets? I appreciate any insights & thoughts!

  Read the article

• mod_pagespeed is rewriting but not combining

  - by Marc vd M

  I have the following problem. I installed mod_pagespeed but i am not getting the results i want! It does rewrite my css and changes the to the cache url but its not combining the css files. I have seached the web and stackoverflow for it but did not find a solution. Here are the tags <link media="all" type="text/css" href="http://domain.com/assets/css/bootstrap.min.css.pagespeed.ce.Iz3TwZXylG.css" rel="stylesheet"> <link media="all" type="text/css" href="http://domain.com/assets/css/W.jquery-ui-1.8.24.custom.css.pagespeed.cf.9yjmvb9yjz.css" rel="stylesheet"> <link media="all" type="text/css" href="http://domain.com/assets/css/W.bootstrap.extend.css.pagespeed.cf.VelsS-YQRX.css" rel="stylesheet"> <link media="all" type="text/css" href="http://domain.com/assets/css/W.base.css.pagespeed.cf.QO1yNADs1p.css" rel="stylesheet"> <link media="all" type="text/css" href="http://domain.com/assets/css/W.style.css.pagespeed.cf.tRzIhRbblc.css" rel="stylesheet">

  Read the article

• Help! cant login to my forum after .htaccess changes

  - by MrRioku

  I'm running a phpbb forum and I installed an SEO friendly URL Mod. After I installed it I wasn't able to login as the admin nor any other users... Well I've been messing around with this problem for a bit and I did find out that it was the .htaccess file that was causing me not to be able to login. I found out if I comment the canonical part out in the .htaccess file, my website allows me to login and see the working mod just fine but I get "http://phone7forum.com/" instead of what I want which is "http://www.phone7forum.com/ : enter code here # HERE IS A GOOD PLACE TO FORCE CANONICAL DOMAIN # RewriteCond %{HTTP_HOST} !^www\.phone7forum\.com$ [NC] # RewriteRule ^(.*)$ http://www.phone7forum.com/$1 [QSA,L,R=301] enter code here I definitely want the "http://www." since its the best method and holds the best weight.. But when I un-comment it, it will not allow me to login as the admin nor any user... Is there anything I can do to fix this matter??? I'd like to add, before I found this website I installed the Mod "Canonical URL" found here: http://www.phpbb.com/customise/db/mod/canonical_url/ Possibly this might be part of my issue? Maybe I should go undo everything that Mod told me to do and then try un-commenting the canonical section in the .htaccess file? Here is my complete .htaccess file as of now that produces the "http://phone7forum.com/" and allows me to login: [code] # Lines That should already be in your .htacess <Files "config.php"> Order Allow,Deny Deny from All </Files> <Files "common.php"> Order Allow,Deny Deny from All </Files> # You may need to un-comment the following lines # Options +FollowSymlinks # To make sure that rewritten dir or file (/|.html) will not load dir.php in case it exist # Options -MultiViews # REMEBER YOU ONLY NEED TO STARD MOD REWRITE ONCE RewriteEngine On # Uncomment the statement below if you want to make use of # HTTP authentication and it does not already work. # This could be required if you are for example using PHP via Apache CGI. # RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] # REWRITE BASE RewriteBase / # HERE IS A GOOD PLACE TO FORCE CANONICAL DOMAIN # RewriteCond %{HTTP_HOST} !^www\.phone7forum\.com$ [NC] # RewriteRule ^(.*)$ http://www.phone7forum.com/$1 [QSA,L,R=301] # DO NOT GO FURTHER IF THE REQUESTED FILE / DIR DOES EXISTS RewriteCond %{REQUEST_FILENAME} -f RewriteCond %{REQUEST_FILENAME} -d RewriteRule . - [L] ##################################################### # PHPBB SEO REWRITE RULES ALL MODES ##################################################### # AUTHOR : dcz www.phpbb-seo.com # STARTED : 01/2006 ################################# # FORUMS PAGES ############### # FORUM INDEX REWRITERULE WOULD STAND HERE IF USED. "forum" REQUIRES TO BE SET AS FORUM INDEX # RewriteRule ^forum\.html$ index.php [QSA,L,NC] # FORUM ALL MODES RewriteRule ^(forum|[a-z0-9_-]*-f)([0-9]+)/?(page([0-9]+)\.html)?$ viewforum.php?f=$2&start=$4 [QSA,L,NC] # TOPIC WITH VIRTUAL FOLDER ALL MODES RewriteRule ^(forum|[a-z0-9_-]*-f)([0-9]+)/(topic|[a-z0-9_-]*-t)([0-9]+)(-([0-9]+))?\.html$ viewtopic.php?f=$2&t=$4&start=$6 [QSA,L,NC] # TOPIC WITHOUT FORUM ID & DELIM ALL MODES RewriteRule ^([a-z0-9_-]*)/?(topic|[a-z0-9_-]*-t)([0-9]+)(-([0-9]+))?\.html$ viewtopic.php?forum_uri=$1&t=$3&start=$5 [QSA,L,NC] # PHPBB FILES ALL MODES RewriteRule ^resources/[a-z0-9_-]+/(thumb/)?([0-9]+)$ download/file.php?id=$2&t=$1 [QSA,L,NC] # PROFILES ALL MODES WITH ID RewriteRule ^(member|[a-z0-9_-]*-u)([0-9]+)\.html$ memberlist.php?mode=viewprofile&u=$2 [QSA,L,NC] # USER MESSAGES ALL MODES WITH ID RewriteRule ^(member|[a-z0-9_-]*-u)([0-9]+)-(topics|posts)(-([0-9]+))?\.html$ search.php?author_id=$2&sr=$3&start=$5 [QSA,L,NC] # GROUPS ALL MODES RewriteRule ^(group|[a-z0-9_-]*-g)([0-9]+)(-([0-9]+))?\.html$ memberlist.php?mode=group&g=$2&start=$4 [QSA,L,NC] # POST RewriteRule ^post([0-9]+)\.html$ viewtopic.php?p=$1 [QSA,L,NC] # ACTIVE TOPICS RewriteRule ^active-topics(-([0-9]+))?\.html$ search.php?search_id=active_topics&start=$2&sr=topics [QSA,L,NC] # UNANSWERED TOPICS RewriteRule ^unanswered(-([0-9]+))?\.html$ search.php?search_id=unanswered&start=$2&sr=topics [QSA,L,NC] # NEW POSTS RewriteRule ^newposts(-([0-9]+))?\.html$ search.php?search_id=newposts&start=$2&sr=topics [QSA,L,NC] # UNREAD POSTS RewriteRule ^unreadposts(-([0-9]+))?\.html$ search.php?search_id=unreadposts&start=$2 [QSA,L,NC] # THE TEAM RewriteRule ^the-team\.html$ memberlist.php?mode=leaders [QSA,L,NC] # HERE IS A GOOD PLACE TO ADD OTHER PHPBB RELATED REWRITERULES # FORUM WITHOUT ID & DELIM ALL MODES # THESE THREE LINES MUST BE LOCATED AT THE END OF YOUR HTACCESS TO WORK PROPERLY RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^([a-z0-9_-]+)/?(page([0-9]+)\.html)?$ viewforum.php?forum_uri=$1&start=$3 [QSA,L,NC] # FIX RELATIVE PATHS : FILES RewriteRule ^.+/(style\.php|ucp\.php|mcp\.php|faq\.php|download/file.php)$ $1 [QSA,L,NC,R=301] # FIX RELATIVE PATHS : IMAGES RewriteRule ^.+/(styles/.*|images/.*)/$ $1 [QSA,L,NC,R=301] # END PHPBB PAGES ##################################################### [/code] Does anyone have any clues as to what I need to do? Any help will be greatly appreciated! Thanks, Justin

  Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >