Search Results

Search found 3089 results on 124 pages for 'digital dan'.

Page 111/124 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

  • Noob with git repository on Windows Storage Server 2008?

    - by HibbyHoo
    I have a Western Digital Sentinel at home running Windows Storage Server 2008 R2 Essentials. I have several git repositories on it for my own personal projects, and have no problem pushing and pulling over my local network. I want to be able to access those repos remotely from anywhere. I am able to log in and remotely access folders and files on it, but I cannot clone repos using the same address. It hangs for a REALLY long time before finally failing with an error: git.exe clone --progress -v "https://myIpAddressHere/Remote/fs/files.aspx?path=%5C%5Cmydevicename%5Cmyreposfolder%5Cmyrepo.git" "D:\repo" Cloning into 'D:\repo'... error: Failed connect to myIpAddress:443; No error while accessing https://myIpAddress/Remote/fs/files.aspx?path=%5C%5Cmydevicename%5Cmyreposfolder%5Cmyrepo.git/info/refs fatal: HTTP request failed git did not exit cleanly (exit code 128) I'm not too privy to networking or web development, and I have only a rudimentary understanding of how to use git (with TortoiseGit). I'm having a hard time finding search results for this specific problem and a hard time interpreting generic tutorials for the general scope of this problem. TortoiseGit version: 1.7.13.0. git version: 1.7.10.mysysgit.1.

    Read the article

  • Linux can dual display but windows can't?

    - by Mr_CryptoPrime
    I have two monitors, one that is hdmi-to-dvi and the other vga-to-dvi. I have an AMD HD Radeon 6900 series graphics card installed. I got Ubuntu to display dual monitors, but then I restarted for an update and then Ubuntu wouldn't even boot in recovery mode, it just kept cycling forever...displaying something about "timeout: killing [filepath] [hexadecimal]. So I tried booting into windows (7-professional) and it crashed and displayed this after rebooting: IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT-IN-NONPAGED-AREA. I went into Bios and reverted to the system defaults and ran system restore and it booted ok, but the dvi-to-dvi monitor would not display. I made sure my drivers were updated and catalyst was updated. Also through research discovered only one is for vga and the other is digital only, so I put the vga-to-dvi in the vga slot and so on. Neither windows or catalyst will detect the dvi-to-dvi montior. Any suggestions? Thanks. EDIT: Found out that booting into Ubuntu with only one monitor (using either monitor with either cable) worked perfectly fine. I could then add another monitor and it displays ok. However, it will, out of the blue, suddenly distort the display. At first I thought the computer crashed, but it is something with the video output from the GPU to the monitor because I pushed the power button and it would refresh every 5secs or so and I could see the "Ubuntu will power down in X seconds", even though it was horribly distorted. Any ideas what's causing this?

    Read the article

  • How can I get DVDs playing after a Vista to XP change? [closed]

    - by Liath
    I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

    Read the article

  • Where can I legally obtain the 64bit version of Windows 8?

    - by Harsha K
    No, I am not looking to pirate. I bought a key through the Upgrade assistant (for just $15 due to the upgrade offer), but it downloaded an iso file that was between 2.3 and 2.5 GB. Which doesn't make sense to me, because the Evaluation version of Windows 8 x64 is closer to 3.4 GB in size. I assumed the Upgrade Assistant would be intelligent enough to realize that it is being run on a Windows 7 x64 machine and by extension, download the x64 code. Previously, I was able to legally download the ISOs (sans the keys, of course) from the Digital River host. I do not see an option to do that. I'm not interested in risking downloading a tampered ISO. I want to do it through Microsoft channels, but I just don't see how. As you may imagine, search terms such as "Windows 8 official download link" result in a plethora of obviously spyware infested piracy sites. If there's any non-exposing way for me to prove that I have legally purchased Windows and I'm genuinely looking for this answer, please let me know. For reference to what I am looking for it is similar to the answer given in this question for Windows 7: Where do I download Windows 7 (legally from Microsoft)?

    Read the article

  • Matched or unmatched drives for RAID arrays?

    - by Will
    Looking around there is conflciting information on this, with some strongly suggesting one or the other. From my understanding the issue with matched drives is that the wear on both drives is more or less the same, so the potential for the second drive failing with or very soon after the first is pretty high. People also claim matched drives give substianatally higher performance however assuming the unmatched drives are more or less the same (eg 2, 1 TB STATA II 7200rpm drives with 32MB cache), would the minor differences between say a Seagate and a Western Digital one (say one has a 128MB/s read rate, and the other a 150MB/s read rate, as well as I guess various other minor differences) actually cause any notable performance loss, ie potentialy worse than two matched 128MB/s drives, or does RAID not really care and give you essentially an optimal solution (eg upto 278MB/s total read speed for RAID 0 and 1) and similar for other RAID with more "unmatched" drives (5 and 1+0 come to mind as possibilities)? Also I couldnt find much info on how this is different on different RAID setups, eg RAID 0 or RAID 1, software or hardware RAID, etc. I'm assuming such things have an effect, and thats it's not all the same for RAID in general?

    Read the article

  • My system is always disk-bound (the disk light is always on). Why is this?

    - by Scoobie
    I have been given a laptop by the good folks at my company on which to do my work (Java development). I usually use eclipse as my primary development platform. The laptop is a Dell D830 and runs Windows 7 - 32 bit. Although the processor supports a 64 bit instruction-set, licensing limits me to running the 32 bit OS. The HDD is a WD1600BEVT (Western Digital). I have noticed that my disk is always very slow. Windows start up is usually pretty quick, however as soon as I log on, my disk light stays on and usually, the laptop takes about 4 minutes (after logging in -- immediately upon getting the prompt to press Ctrl + Alt + Del to log in) before it's usable. Questions: Is this expected behavior? What can I do to examine the disk and determine the cause of the problem? What can I do to improve my disk's performance? Any optimizations you may be able to suggest? Other Questions: Some have suggested running Process Monitor (from sysinternals), but how would i get the log since start up? Instead of trying to fix this myself, should I simply push this onto the system administrator? Thanks all.

    Read the article

  • Duplicate monitor on highest resolution in Windows 7

    - by AlexanderMP
    I have a monitor with a native resolution of 2560x1440, connected through display port. I also have an AV Receiver connected to the video card via HDMI, to have surround sound in games. All using Radeon HD 5670 (will upgrade soon to HD 7850). The problem is that my computer detects the receiver as a separate monitor, with the highest available resolution of 1920x1080. I have 3 options: Disconnect the second display. But then the sound (digital audio output through video card) also disappears. Duplicate displays. But then my primary monitor resolution is reduced to a maximum of just 1920x1080, that being the maximum of the second monitor. Extend desktop. This is the solution I picked so far, it being the least evil. The problems I face in this situations are 2: I have a blank part of the desktop where I sometimes lose my mouse pointer, so I made the extension small, 640x480, and placed it in a corner; when I turn off the main display, all windows resize to 640x480. In Kubuntu I had the option to duplicate the displays, while keeping the higher resolution. Which was great. I tried overriding using the Win7 netbook hack, but it's not available on non-netbooks. Is there a similar solution for this problem in Windows 7?

    Read the article

  • JQuery Hover li Show div which sits outside li structure

    - by Dave_Stott
    Hi everyone I'm currently trying to create a "mega" dropout menu using JQuery but have encountered an issue I'm yet to be able to resolve. At the moment I have the following HTML structure: <div id="TopNav" class="grid_16"> <ul class="cmsListMenuUL level0" id="TopNavMenu"> <li class="cmsListMenuLIcmsListMenuLI highlightedLI" id="TopNavMenu_Home"><a href="/"> <span class="text">Home</span></a></li> <li class="cmsListMenuLIfirst" id="TopNavMenu_0_1"><a href="/Key-Sectors.aspx" class="cmsListMenuLink"> <span class="text">Key Sectors</span></a></li> <li class="cmsListMenuLI" id="TopNavMenu_0_2"><a href="/Global-Brands.aspx" class="cmsListMenuLink"> <span class="text">Global Brands</span></a></li> <li class="cmsListMenuLI" id="TopNavMenu_0_3"><a href="/News---Features.aspx" class="cmsListMenuLink"> <span class="text">News &amp; Features</span></a></li> <li class="cmsListMenuLI" id="TopNavMenu_0_4"><a href="/Videos.aspx" class="cmsListMenuLink"> <span class="text">Videos</span></a></li> <li class="cmsListMenuLI" id="TopNavMenu_0_5"><a href="/Events.aspx" class="cmsListMenuLink"> <span class="text">Events</span></a></li> <li class="cmsListMenuLI" id="TopNavMenu_0_6"><a href="/Key-Cities.aspx" class="cmsListMenuLink"> <span class="text">Key Cities</span></a></li> <li class="cmsListMenuLI" id="TopNavMenu_0_7"><a href="/Doing-Business-in-Yorkshire.aspx" class="cmsListMenuLink"><span class="text">Doing Business in Yorkshire</span></a></li> <li class="cmsListMenuLI" id="TopNavMenu_0_8"><a href="/How-We-Can-Help.aspx" class="cmsListMenuLink"> <span class="text">How We Can Help</span></a></li> <li class="cmsListMenuLI" id="TopNavMenu_0_9"><a href="/Contact-Us.aspx" class="cmsListMenuLink"> <span class="text">Contact Us</span></a></li> </ul> </div> <div class="sectorsDropped"> <div class="floatLeft leftColumn"> <div class="parentItem" style="border-color: #0064BE;"> <a href="/Key-Sectors/Advanced-Engineering---Materials.aspx" class="parentItemContent"> Advanced Engineering &amp; Materials</a><div class="childItem"> <a href="/Key-Sectors/Advanced-Engineering---Materials/Nuclear.aspx">- Nuclear</a></div> <div class="childItem"> <a href="/Key-Sectors/Advanced-Engineering---Materials/Logistics---Infrastructure.aspx"> - Logistics &amp; Infrastructure</a></div> </div> <div class="parentItem" style="border-color: #FFB611;"> <a href="/Key-Sectors/Chemicals.aspx" class="parentItemContent">Chemicals</a></div> <div class="parentItem" style="border-color: #B7CC0B;"> <a href="/Key-Sectors/Environmental-Technologies.aspx" class="parentItemContent">Environmental Technologies</a><div class="childItem"> <a href="/Key-Sectors/Environmental-Technologies/Offshore-Wind.aspx">- Offshore Wind</a></div> <div class="childItem"> <a href="/Key-Sectors/Environmental-Technologies/Carbon-Capture---Storage.aspx">- Carbon Capture &amp; Storage</a></div> <div class="childItem"> <a href="/Key-Sectors/Environmental-Technologies/Tidal-Power.aspx">- Tidal Power</a></div> <div class="childItem"> <a href="/Key-Sectors/Environmental-Technologies/Biomass.aspx">- Biomass</a></div> </div> </div> <div class="floatLeft rightColumn"> <div class="parentItem" style="border-color: #AC26AA;"> <a href="/Key-Sectors/Digital---New-Media.aspx" class="parentItemContent">Digital &amp; New Media</a></div> <div class="parentItem" style="border-color: #e1477e;"> <a href="/Key-Sectors/Food---Drink.aspx" class="parentItemContent">Food &amp; Drink</a></div> <div class="parentItem" style="border-color: #00c5b5;"> <a href="/Key-Sectors/Healthcare-Technologies.aspx" class="parentItemContent">Healthcare Technologies</a><div class="childItem"> <a href="/Key-Sectors/Healthcare-Technologies/Biotechnology.aspx">- Biotechnology</a></div> <div class="childItem"> <a href="/Key-Sectors/Healthcare-Technologies/Pharmaceuticals.aspx">- Pharmaceuticals</a></div> <div class="childItem"> <a href="/Key-Sectors/Healthcare-Technologies/Medical-Devices.aspx">- Medical Devices</a></div> </div> <div class="parentItem" style="border-color: #AC1A2F;"> <a href="/Key-Sectors/Financial---Professional.aspx" class="parentItemContent">Financial &amp; Professional</a></div> </div> </div> In normal circumstances the div containing the "mega" menu options would sit inside the li item that fires the show/hide but this is currently not possible as the ul list of navigation links is rendered using a 3rd party piece of software which does not provide an equivalent of an OnItemDataBound event for me to be able to inject the div into the item Does anyone know of a way, using JQuery, of showing the div but maintain the display of the div as the mouse focus leaves the li that originaly displayed the div and actually enters the div? I'm currently using the following JQuery which displays the div correctly but as the mouse focus enters the div the div then disappears as the mouse focus from the li has now moved: $(document).ready(function() { function addMega(){ $(".sectorsDropped").toggle("fast"); } function removeMega(){ $(".sectorsDropped").toggle("fast"); } var megaConfig = { interval: 500, sensitivity: 4, over: addMega, timeout: 500, out: removeMega }; $("#TopNavMenu_0_1").hoverIntent(megaConfig) }); Thanks Dave

    Read the article

  • Weight doesn't work in a custom android component

    - by RCB
    I wanted to create a custom bottom button bar layout, I've created a xml file : <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" style="@android:style/ButtonBar" android:layout_width="fill_parent" android:layout_height="wrap_content" android:orientation="horizontal" android:padding="0dp" > <Button android:id="@+id/media_menu_button" style="?android:attr/buttonStyleSmall" android:layout_width="0dp" android:layout_height="match_parent" android:layout_margin="0dp" android:layout_weight="1" android:text="@string/media_menu_button" /> <Button android:id="@+id/scenario_menu_button" style="?android:attr/buttonStyleSmall" android:layout_width="0dp" android:layout_height="match_parent" android:layout_margin="0dp" android:layout_weight="1" android:text="@string/scenario_menu_button" /> <Button android:id="@+id/rooms_menu_button" style="?android:attr/buttonStyleSmall" android:layout_width="0dp" android:layout_height="match_parent" android:layout_margin="0dp" android:layout_weight="1" android:text="@string/rooms_menu_button" /> <Button android:id="@+id/shortcut_menu_button" style="?android:attr/buttonStyleSmall" android:layout_width="0dp" android:layout_height="match_parent" android:layout_margin="0dp" android:layout_weight="1" android:text="@string/shortcut_menu_button" /> as you can see I've given all the buttons width 0dp and weight of 1. then, I've created a class that extends the linear layout class : public class BeLightBottomBar extends LinearLayout implements OnClickListener { private LayoutInflater mInflater; private Context contexnt; private Button mShortcutMenuButton; private Button mRoomsMenuButton; private Button mScenarioMenuButton; private Button mMediaMenuButton; public BeLightBottomBar(Context context, AttributeSet attrs) { super(context, attrs); //inflate the view this.contexnt = context; mInflater = (LayoutInflater) context.getSystemService(Context.LAYOUT_INFLATER_SERVICE); LinearLayout barView = (LinearLayout) mInflater.inflate(R.layout.belight_bottombar, null); addView(barView); //get all the instances of the components of the bar mShortcutMenuButton = (Button) barView.findViewById(R.id.shortcut_menu_button); mRoomsMenuButton = (Button) barView.findViewById(R.id.rooms_menu_button); mScenarioMenuButton = (Button) barView.findViewById(R.id.scenario_menu_button); mMediaMenuButton = (Button) barView.findViewById(R.id.media_menu_button); //set this as a click listener mShortcutMenuButton.setOnClickListener(this); mRoomsMenuButton.setOnClickListener(this); mScenarioMenuButton.setOnClickListener(this); mMediaMenuButton.setOnClickListener(this); ... ... ... } the problem is when i add this class to the main activity xml <belight.homecontrol.components.BeLightBottomBar android:id="@+id/button_bar" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_alignParentBottom="true" android:layout_margin="0dp" android:padding="0dp" /> the weight stops working, all the buttons are different. and I don't know why !? if I just copy paste the bottom's bar xml code to the main xml file it works fine, the problem only occurs when using it as a whole. P.S. Is it a good practice to create a component this way? Or maybe I'm doing something wrong? Thanks, Dan

    Read the article

  • WebClient security error when accessing the world of warcraft armoury

    - by user348446
    Hello World, I am trying to piece together a solution to a problem. Basically I am using Silverlight 4 with C# 4.0 to access the world of warcraft armoury. If anyone has done this - please oh please provide the working .net 4.0 code. The code I am attempting to run is (e.Error contains a securtiy error): private void button10_Click(object sender, RoutedEventArgs e) { string url = @"http://eu.wowarmory.com/guild-info.xml?r=Eonar&n=Gifted and Talented"; WebClient wc = new WebClient(); // HOW DO I ADD A USER AGENT STRING (RESPONSE MAY VARY (I.E. HTML VS XML) IF PAGE THINKS CALL IS NOT CAPABABLE OF SUPPORTING XML TRANSFORMATIONS) //wc.ResponseHeaders["User-Agent"] = "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0)"; wc.DownloadStringCompleted += new DownloadStringCompletedEventHandler(wc_DownloadStringCompleted); wc.DownloadStringAsync(new Uri(url)); } void wc_DownloadStringCompleted(object sender, DownloadStringCompletedEventArgs e) { if (e.Error == null) { string result = e.Result; XDocument ArmouryXML = XDocument.Parse(result); ShowGuildies(ArmouryXML); } else { MessageBox.Show("Something is complaining about security but not sure what!"); } } Notes: C# 4.0 The armoury is an XML file - but i believe it reverts to html should the request not be from a browser that supports XML transformation. But i don't think I am getting this far. The armoury has a cross domain policy file on it - this may be the cause of the error (not sure! I have uploaded to a production server I am testing it locally using IIS website I am going insane! Websites have made the suggestion that this problem can be overcome by creating a WebProxy - but I haven't the first clue how to do this. It would be great if someone could take on this challenge and show us all that it is possible. I'd prefer a non-proxy solution first, then try a proxy. The error details: e.Error = {System.Security.SecurityException --- System.Security.SecurityException: Security error. at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult) at System.Net.Browser.BrowserHttpWebRequest.<c__DisplayClass5. Any intelligent master coders out there who can solve this in their sleep? Thanks if you can! Pass this on to someone who can if you can't. If you know someone who can't, don't pass it to them, but if you know someone can't then presumedly you know how to solve it and would encourage you to give it a go! Cheers! Dan.

    Read the article

  • South migration error: NoMigrations exception for django.contrib.auth

    - by danpalmer
    I have been using South on my project for a while, but I recently did a huge amount of development and changed development machine and I think something messed up in the process. The project works fine, but I can't apply migrations. Whenever I try to apply a migration I get the following traceback: danpalmer:pest Dan$ python manage.py migrate frontend Traceback (most recent call last): File "manage.py", line 11, in <module> execute_manager(settings) File "/Library/Python/2.6/site-packages/django/core/management/__init__.py", line 362, in execute_manager utility.execute() File "/Library/Python/2.6/site-packages/django/core/management/__init__.py", line 303, in execute self.fetch_command(subcommand).run_from_argv(self.argv) File "/Library/Python/2.6/site-packages/django/core/management/base.py", line 195, in run_from_argv self.execute(*args, **options.__dict__) File "/Library/Python/2.6/site-packages/django/core/management/base.py", line 222, in execute output = self.handle(*args, **options) File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/management/commands/migrate.py", line 102, in handle delete_ghosts = delete_ghosts, File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/migration/__init__.py", line 182, in migrate_app applied = check_migration_histories(applied, delete_ghosts) File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/migration/__init__.py", line 85, in check_migration_histories m = h.get_migration() File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/models.py", line 34, in get_migration return self.get_migrations().migration(self.migration) File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/models.py", line 31, in get_migrations return Migrations(self.app_name) File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/migration/base.py", line 60, in __call__ self.instances[app_label] = super(MigrationsMetaclass, self).__call__(app_label_to_app_module(app_label), **kwds) File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/migration/base.py", line 88, in __init__ self.set_application(application, force_creation, verbose_creation) File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/migration/base.py", line 159, in set_application raise exceptions.NoMigrations(application) south.exceptions.NoMigrations: Application '<module 'django.contrib.auth' from '/Library/Python/2.6/site-packages/django/contrib/auth/__init__.pyc'>' has no migrations. I am not that experienced with South and I haven't met this error before. The only helpful mention I can find online about this error is for pre-0.7 I think and I am on South 0.7. I ran 'easy_install -U South' just to make sure. Thanks for any help that you can provide. I really appreciate it.

    Read the article

  • echo XML values

    - by danit
    Here is my XML: object(SimpleXMLElement)#1 (2) { ["@attributes"]=> array(1) { ["type"]=> string(5) "array" } ["feed"]=> array(3) { [0]=> object(SimpleXMLElement)#2 (6) { ["title"]=> string(34) "Twitter / Favorites from bob" ["id"]=> string(27) "tag:twitter.com,2007:Status" ["link"]=> array(2) { [0]=> object(SimpleXMLElement)#5 (1) { ["@attributes"]=> array(3) { ["type"]=> string(9) "text/html" ["href"]=> string(38) "http://twitter.com/bob/favorites" ["rel"]=> string(9) "alternate" } } [1]=> object(SimpleXMLElement)#6 (1) { ["@attributes"]=> array(3) { ["type"]=> string(20) "application/atom+xml" ["href"]=> string(40) "http://twitter.com/favorites.atom?page=1" ["rel"]=> string(4) "self" } } } ["updated"]=> string(25) "2010-04-01T10:44:19+00:00" ["subtitle"]=> string(56) "Twitter updates favorited by Dan Humpherson / MoodleDan." ["entry"]=> array(20) { [0]=> object(SimpleXMLElement)#7 (7) { ["title"]=> string(104) "smashingmag: Sikuli: a visual technology to search and automate GUIs using images - http://bit.ly/6ArwzP" ["content"]=> string(104) "smashingmag: Sikuli: a visual technology to search and automate GUIs using images - http://bit.ly/6ArwzP" ["id"]=> string(72) "tag:twitter.com,2007:http://twitter.com/smashingmag/statuses/11389386545" ["published"]=> string(25) "2010-03-31T22:06:41+00:00" ["updated"]=> string(25) "2010-03-31T22:06:41+00:00" ["link"]=> array(2) { [0]=> object(SimpleXMLElement)#27 (1) { ["@attributes"]=> array(3) { ["type"]=> string(9) "text/html" ["href"]=> string(51) "http://twitter.com/smashingmag/statuses/11389386545" ["rel"]=> string(9) "alternate" } } [1]=> object(SimpleXMLElement)#28 (1) { ["@attributes"]=> array(3) { ["type"]=> string(10) "image/jpeg" ["href"]=> string(64) "http://a3.twimg.com/profile_images/572829723/original_normal.jpg" ["rel"]=> string(5) "image" } } } ["author"]=> object(SimpleXMLElement)#29 (2) { ["name"]=> string(17) "Smashing Magazine" ["uri"]=> string(31) "http://www.smashingmagazine.com" } } For the life of me I cannot get my code to work, all I want to do is echo the entry->content string but no matter what I try I get nothing. Can anyone assist an inept PHP n00b?

    Read the article

  • Asynchronous Silverlight 4 call to the World of Warcraft armoury streaming XML in C#

    - by user348446
    Hello - I have been stuck on this all weekend and failed miserably! Please help me to claw back my sanity!! Your challenge For my first Silverlight application I thought it would be fun to use the World of Warcraft armoury to list the characters in my guild. This involves making an asyncronous from Silverlight (duh!) to the WoW armoury which is XML based. SIMPLE EH? Take a look at this link and open the source. You'll see what I mean: http://eu.wowarmory.com/guild-info.xml?r=Eonar&n=Gifted and Talented Below is code for getting the XML (the call to ShowGuildies will cope with the returned XML - I have tested this locally and I know it works). I have not managed to get the expected returned XML at all. Notes: If the browser is capable of transforming the XML it will do so, otherwise HTML will be provided. I think it examines the UserAgent I am a seasoned asp.net web developer C# so go easy if you start talking about native to Windows Forms / WPF I can't seem to set the UserAgent setting in .net 4.0 - doesn't seem to be a property off the HttpWebRequest object for some reason - i think it used to be available. Silverlight 4.0 (created as 3.0 originally before I updated my installation of Silverlight to 4.0) Created using C# 4.0 Please explain as if you talking to a web developer and not a proper programming lol! Below is the code - it should return the XML from the wow armoury. private void button7_Click(object sender, RoutedEventArgs e) { // URL for armoury lookup string url = @"http://eu.wowarmory.com/guild-info.xml?r=Eonar&n=Gifted and Talented"; // Create the web request HttpWebRequest httpWebRequest = (HttpWebRequest)WebRequest.Create(url); // Set the user agent so we are returned XML and not HTML //httpWebRequest.Headers["User-Agent"] = "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0)"; // Not sure about this dispatcher thing - it's late so i have started to guess. Dispatcher.BeginInvoke(delegate() { // Call asyncronously IAsyncResult asyncResult = httpWebRequest.BeginGetResponse(ReqCallback, httpWebRequest); // End the response and use the result using (HttpWebResponse httpWebResponse = (HttpWebResponse)httpWebRequest.EndGetResponse(asyncResult)) { // Load an XML document from a stream XDocument x = XDocument.Load(httpWebResponse.GetResponseStream()); // Basic function that will use LINQ to XML to get the list of characters. ShowGuildies(x); } }); } private void ReqCallback(IAsyncResult asynchronousResult) { // Not sure what to do here - maybe update the interface? } Really hope someone out there can help me! Thanks mucho! Dan. PS Yes, I have noticed the irony in the name of the guild :)

    Read the article

  • On Click alert if $.get returns a value, if not, submit the form

    - by bradenkeith
    If the submit button is clicked, prevent the default action and see if the field 'account_name' is already in use. If the $.get() returns a result, alert the user of the results. If it doesn't, submit form with id="add_account_form". My problem is that my else{} statement is not submitting the form. I get no response when submit is clicked & there is no value returned. Also I would like to change my code where it goes $("#add_account_form").submit(..) instead of .click() however, would that cause a problem when trying to submit the form later in the script? <script type="text/javascript"> $(document).ready( function () { $("#submit").click( function () { var account_name = $("input[name=account_name]").val(); $.get( "'.url::site("ajax/check_account_name").'", {account_name: account_name}, function(data){ if(data.length > 0){ confirm( "The account name you entered looks like the following:\n" +data+ "Press cancel if this account already exists or ok to create it." ); }else{ $("#add_account_form").submit(); } }); return false; }); }); </script> <p> <input type="submit" id="submit" class="submit small" name="submit" value="Submit" /> </p> </form> Thanks for your help. EDIT So anyone who runs into my problems, it's that $.get() is asynchronous, so it will always return false, or true depending on what submitForm is defined as. $.ajax() however, allows async to be set as false, which allows the function to finish before moving on. See what I mean: $(document).ready( function () { $("#add_account_form").submit( function () { var submitForm = true; var account_name = $("input[name=account_name]").val(); $.ajax({ type: "GET", async: false, url: "'.url::site("ajax/check_account_name").'", data: ({account_name: account_name}), success: function(data){ if(data.length > 0){ if(!confirm( "The account name you entered looks like the following:\n" +data+ "Press cancel if this account already exists or ok to create it." )){ submitForm = false; } } } }); if (submitForm == false ) { return false; } }); }); Thanks for your help @Dan

    Read the article

  • Model Binding with Parent/Child Relationship

    - by user296297
    I'm sure this has been answered before, but I've spent the last three hours looking for an acceptable solution and have been unable to find anything, so I apologize for what I'm sure is a repeat. I have two domain objects, Player and Position. Player's have a Position. My domain objects are POCOs tied to my database with NHibernate. I have an Add action that takes a Player, so I'm using the built in model binding. On my view I have a drop down list that lets a user select the Position for the Player. The value of the drop down list is the Id of the position. Everything gets populated correctly except that my Position object fails validation (ModelState.IsValid) because at the point of model binding it only has an Id and none of it's other required attributes. What is the preferred solution for solving this with ASP.NET MVC 2? Solutions I've tried... Fetch the Position from the database based on the Id before ModelState.IsValid is called in the Add action of my controller. I can't get the model to run the validation again, so ModelState.IsValid always returns false. Create a custom ModelBinder that inherits from the default binder and fetch the Position from the database after the base binder is called. The ModelBinder seems to be doing the validation so if I use anything from the default binder I'm hosed. Which means I have to completely roll my own binder and grab every value from the form...this seems really wrong and inefficient for such a common use-case. Solutions I think might work, I just can't figure out how to do... Turn off the validation for the Position class when used in Player. Write a custom ModelBinder leverages the default binder for most of the property binding, but lets me get the Position from the database BEFORE the default binder runs validation. So, how do the rest of you solve this? Thanks, Dan P.S. In my opinion having a PositionId on Player just for this case is not a good solution. There has to be solvable in a more elegant fashion.

    Read the article

  • Problem with Command Pattern under Visual Studio 2008 (C++)

    - by D.Giunchi
    Dear All, I've a problem with this pattern under c++ on VS 2008. The same code has been tested in gcc (linux, mac and mingw for widnows) and it works. I copy/paste the code here: class MyCommand { public: virtual void execute() = 0; virtual ~MyCommand () {}; }; class MyOperation { public: virtual void DoIt() {}; //I also write it not inline }; class MyOperationDerived : public MyOperation { public: virtual void DoIt() {}; //I also write it not inline }; class MyUndoStackCommand : public MyCommand { public: typedef void(MyOperation::*Action)(); MyUndoStackCommand(MyOperation *rec, Action action); /*virtual*/ void execute(); /*virtual*/ ~MyUndoStackCommand(); private: MyOperation *myReceiver; Action myAction ; }; in cpp: #include "MyUndoStackCommand.h" #include "MyOperation.h" MyUndoStackCommand::~MyUndoStackCommand() { } MyUndoStackCommand::MyUndoStackCommand(myOperation *rec, Action action): myReceiver(rec), myAction(action) { } void MyUndoStackCommand::execute() { ((myReceiver)->*(myAction))(); } use in main.cpp: MyReceiver receiver; MyUndoStackCommand usc(&receiver, &MyOperation::DoIt); usc.execute(); when I debug under visual studio only if I set inside MyUndoStackCommand, directly myAction = &MyOperation::DoIt , it works, otherwise not. Any advice? thank you very much, dan Edit: The following code compiles with g++ - changes by Neil Butterworth flagged as //NB. class MyCommand { public: virtual void execute() = 0; virtual ~MyCommand () {}; }; class MyOperation { public: virtual void DoIt() {}; //I also write it not inline }; class MyOperationDerived : public MyOperation { public: virtual void DoIt() {}; //I also write it not inline }; class MyUndoStackCommand : public MyCommand { public: typedef void(MyOperation::*Action)(); MyUndoStackCommand(MyOperation *rec, Action action); /*virtual*/ void execute(); /*virtual*/ ~MyUndoStackCommand(); private: MyOperation *myReceiver; Action myAction ; }; MyUndoStackCommand::~MyUndoStackCommand() { } MyUndoStackCommand::MyUndoStackCommand(MyOperation *rec, //NB Action action) : myReceiver(rec), myAction(action) { } void MyUndoStackCommand::execute() { ((myReceiver)->*(myAction))(); } int main() { MyOperation receiver; //NB MyUndoStackCommand usc(&receiver, &MyOperation::DoIt); usc.execute(); }

    Read the article

  • SQL SERVER – History of SQL Server Database Encryption

    - by pinaldave
    I recently met Michael Coles and Rodeney Landrum the author of one of the kind book Expert SQL Server 2008 Encryption at SQLPASS in Seattle. During the conversation we ended up how Microsoft is evolving encryption technology. The same discussion lead to talking about history of encryption tools in SQL Server. Michale pointed me to page 18 of his book of encryption. He explicitly give me permission to re-produce relevant part of history from his book. Encryption in SQL Server 2000 Built-in cryptographic encryption functionality was nonexistent in SQL Server 2000 and prior versions. In order to get server-side encryption in SQL Server you had to resort to purchasing or creating your own SQL Server XPs. Creating your own cryptographic XPs could be a daunting task owing to the fact that XPs had to be compiled as native DLLs (using a language like C or C++) and the XP application programming interface (API) was poorly documented. In addition there were always concerns around creating wellbehaved XPs that “played nicely” with the SQL Server process. Encryption in SQL Server 2005 Prior to the release of SQL Server 2005 there was a flurry of regulatory activity in response to accounting scandals and attacks on repositories of confidential consumer data. Much of this regulation centered onthe need for protecting and controlling access to sensitive financial and consumer information. With the release of SQL Server 2005 Microsoft responded to the increasing demand for built-in encryption byproviding the necessary tools to encrypt data at the column level. This functionality prominently featured the following: Support for column-level encryption of data using symmetric keys or passphrases. Built-in access to a variety of symmetric and asymmetric encryption algorithms, including AES, DES, Triple DES, RC2, RC4, and RSA. Capability to create and manage symmetric keys. Key creation and management. Ability to generate asymmetric keys and self-signed certificates, or to install external asymmetric keys and certificates. Implementation of hierarchical model for encryption key management, similar to the ANSI X9.17 standard model. SQL functions to generate one-way hash codes and digital signatures, including SHA-1 and MD5 hashes. Additional SQL functions to encrypt and decrypt data. Extensions to the SQL language to support creation, use, and administration of encryption keys and certificates. SQL CLR extensions that provide access to .NET-based encryption functionality. Encryption in SQL Server 2008 Encryption demands have increased over the past few years. For instance, there has been a demand for the ability to store encryption keys “off-the-box,” physically separate from the database and the data it contains. Also there is a recognized requirement for legacy databases and applications to take advantage of encryption without changing the existing code base. To address these needs SQL Server 2008 adds the following features to its encryption arsenal: Transparent Data Encryption (TDE): Allows you to encrypt an entire database, including log files and the tempdb database, in such a way that it is transparent to client applications. Extensible Key Management (EKM): Allows you to store and manage your encryption keys on an external device known as a hardware security module (HSM). Cryptographic random number generation functionality. Additional cryptography-related catalog views and dynamic management views. SQL language extensions to support the new encryption functionality. The encryption book covers all the tools in its various chapter in one simple story. If you are interested how encryption evolved and reached to the stage where it is today, this book is must for everyone. You can read my earlier review of the book over here. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLAuthority News, T SQL, Technology Tagged: Encryption, SQL Server Encryption, SQLPASS

    Read the article

  • Edit Text in a Webpage with Internet Explorer 8

    - by Matthew Guay
    Internet Explorer is often decried as the worst browser for web developers, but IE8 actually offers a very nice set of developer tools.  Here we’ll look at a unique way to use them to edit the text on any webpage. How to edit text in a webpage IE8’s developer tools make it easy to make changes to a webpage and view them directly.  Simply browse to the webpage of your choice, and press the F12 key on your keyboard.  Alternately, you can click the Tools button, and select Developer tools from the list. This opens the developer tools.  To do our editing, we want to select the mouse button on the toolbar “Select Element by Click” tool. Now, click on any spot of the webpage in IE8 that you want to edit.  Here, let’s edit the footer of Google.com.  Notice it places a blue box around any element you hover over to make it easy to choose exactly what you want to edit. In the developer tools window, the element you selected before is now highlighted.  Click the plus button beside that entry if the text you want to edit is not visible.   Now, click the text you wish to change, and enter what you wish in the box.  For fun, we changed the copyright to say “©2010 Microsoft”. Go back to IE to see the changes on the page! You can also change a link on a page this way: Or you can even change the text on a button: Here’s our edited Google.com: This may be fun for playing a trick on someone or simply for a funny screenshot, but it can be very useful, too.  You could test how changes in fontsize would change how a website looks, or see how a button would look with a different label.  It can also be useful when taking screenshots.  For instance, if I want to show a friend how to do something in Gmail but don’t want to reveal my email address, I could edit the text on the top right before I took the screenshot.  Here I changed my Gmail address to [email protected]. Please note that the changes will disappear when you reload the page.  You can save your changes from the developer tools window, though, and reopen the page from your computer if you wish. We have found this trick very helpful at times, and it can be very fun too!  Enjoy it, and let us know how you used it to help you! Similar Articles Productive Geek Tips Edit Webpage Text Areas in Your Favorite Text EditorRemove Webpage Formatting or View the HTML Code When Copying in FirefoxChange the Default Editor From Nano on Ubuntu LinuxShare Text & Images the Easy Way with JustPaste.itEditPad Lite – All Purpose Tabbed Text Editor TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Edit Text in a Webpage with Internet Explorer 8

    - by Matthew Guay
    Internet Explorer is often decried as the worst browser for web developers, but IE8 actually offers a very nice set of developer tools.  Here we’ll look at a unique way to use them to edit the text on any webpage. How to edit text in a webpage IE8’s developer tools make it easy to make changes to a webpage and view them directly.  Simply browse to the webpage of your choice, and press the F12 key on your keyboard.  Alternately, you can click the Tools button, and select Developer tools from the list. This opens the developer tools.  To do our editing, we want to select the mouse button on the toolbar “Select Element by Click” tool. Now, click on any spot of the webpage in IE8 that you want to edit.  Here, let’s edit the footer of Google.com.  Notice it places a blue box around any element you hover over to make it easy to choose exactly what you want to edit. In the developer tools window, the element you selected before is now highlighted.  Click the plus button beside that entry if the text you want to edit is not visible.   Now, click the text you wish to change, and enter what you wish in the box.  For fun, we changed the copyright to say “©2010 Microsoft”. Go back to IE to see the changes on the page! You can also change a link on a page this way: Or you can even change the text on a button: Here’s our edited Google.com: This may be fun for playing a trick on someone or simply for a funny screenshot, but it can be very useful, too.  You could test how changes in fontsize would change how a website looks, or see how a button would look with a different label.  It can also be useful when taking screenshots.  For instance, if I want to show a friend how to do something in Gmail but don’t want to reveal my email address, I could edit the text on the top right before I took the screenshot.  Here I changed my Gmail address to [email protected]. Please note that the changes will disappear when you reload the page.  You can save your changes from the developer tools window, though, and reopen the page from your computer if you wish. We have found this trick very helpful at times, and it can be very fun too!  Enjoy it, and let us know how you used it to help you! Similar Articles Productive Geek Tips Edit Webpage Text Areas in Your Favorite Text EditorRemove Webpage Formatting or View the HTML Code When Copying in FirefoxChange the Default Editor From Nano on Ubuntu LinuxShare Text & Images the Easy Way with JustPaste.itEditPad Lite – All Purpose Tabbed Text Editor TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Create a Customized Tab on the Office 2010 Ribbon

    - by Mysticgeek
    Some MS Office users were put off a bit by the Ribbon feature in 2007 for being cumbersome and confusing. Today we look at a cool new feature in Office 2010 that allows you to create your own custom tabs with specific commands for easier document creation. Create a Customized Tab In our example we’re using Word, but you can create a custom tab in the other Office apps as well. To do so, right-click on the Ribbon and select Customize the Ribbon. The Word Options screen opens up and from here you can manage a lot of customization options. We want to create a new customized tab, so click on the New Tab button.   Now give it a name… Now just drag the commands you want to add from the left column over to your new custom group. You have every command available to choose from. You can select specific groups or all commands from the dropdown menu on the left. That is all there is to it…now you have your own customized tab with the commands you use most often to help you work more efficiently. In this example We didn’t add a whole lot of commands, but you can customize it with as many as you need. You can also create other tabs with different sets of commands too. When you create a customized tab in one application, it’s only going to be in that app. For example if you create on in Word, it’s not going to show in Excel as commands differ between apps. If you want a custom tab in another Office app you’ll need to create one for it. Another very cool thing you can do is export the customizations to use on another machine or pass them to a coworker. To export the customizations, go to the Customize Ribbon section and at the bottom of the right field click Import/Export then Export all customizations. Then save the file to a location on your hard drive.   To import the settings to another machine, go into Ribbon Customizations and select Import customizations file… then browse the the file you exported. You’ll be prompted to confirm you want to import he customizations… After confirming the choice now you’ll see the customization show up on the other machine. This is very handy if you work on several machines throughout the day and want to easily bring your customized tabs with you. If you find yourself using a lot of specific commands throughout the day, creating your own customized tab will help access them more quickly. If you want to test out Office 2010 it’s currently in Public Beta and can be downloaded for free. Download Office 2010 Beta Similar Articles Productive Geek Tips Maximize Space by "Auto-Hiding" the Ribbon in Office 2007Make Learning Office 2007 & 2010 Fun with Ribbon HeroAdd or Remove Apps from the Microsoft Office 2007 or 2010 SuiteHow To Bring Back the Old Menus in Office 2007How To Take Screenshots with Word 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Create a Customized Tab on the Office 2010 Ribbon

    - by Mysticgeek
    Some MS Office users were put off a bit by the Ribbon feature in 2007 for being cumbersome and confusing. Today we look at a cool new feature in Office 2010 that allows you to create your own custom tabs with specific commands for easier document creation. Create a Customized Tab In our example we’re using Word, but you can create a custom tab in the other Office apps as well. To do so, right-click on the Ribbon and select Customize the Ribbon. The Word Options screen opens up and from here you can manage a lot of customization options. We want to create a new customized tab, so click on the New Tab button.   Now give it a name… Now just drag the commands you want to add from the left column over to your new custom group. You have every command available to choose from. You can select specific groups or all commands from the dropdown menu on the left. That is all there is to it…now you have your own customized tab with the commands you use most often to help you work more efficiently. In this example We didn’t add a whole lot of commands, but you can customize it with as many as you need. You can also create other tabs with different sets of commands too. When you create a customized tab in one application, it’s only going to be in that app. For example if you create on in Word, it’s not going to show in Excel as commands differ between apps. If you want a custom tab in another Office app you’ll need to create one for it. Another very cool thing you can do is export the customizations to use on another machine or pass them to a coworker. To export the customizations, go to the Customize Ribbon section and at the bottom of the right field click Import/Export then Export all customizations. Then save the file to a location on your hard drive.   To import the settings to another machine, go into Ribbon Customizations and select Import customizations file… then browse the the file you exported. You’ll be prompted to confirm you want to import he customizations… After confirming the choice now you’ll see the customization show up on the other machine. This is very handy if you work on several machines throughout the day and want to easily bring your customized tabs with you. If you find yourself using a lot of specific commands throughout the day, creating your own customized tab will help access them more quickly. If you want to test out Office 2010 it’s currently in Public Beta and can be downloaded for free. Download Office 2010 Beta Similar Articles Productive Geek Tips Maximize Space by "Auto-Hiding" the Ribbon in Office 2007Make Learning Office 2007 & 2010 Fun with Ribbon HeroAdd or Remove Apps from the Microsoft Office 2007 or 2010 SuiteHow To Bring Back the Old Menus in Office 2007How To Take Screenshots with Word 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Windows Phone 7 Prototype 001: Speech Recognition on WP7

    At some point in the future it will be awesome when you can just tell your computer what to do and it does it - without typing to help those of us with a blistering 11 WPM hunk and peck technique. Siri, a mobile digital assistant using speech recognition was voted best tech at SXSW. I dont know about that one. Although, I'm sure it will get better when Apple rebuilds it and  bundles on iPhone 5. So how would you do that on WP7? There have been some videos floating around showing Bing with some voice control so obviously the phone has speech recognition. So what options are there: System.Speech? Not included in WP7/SL Nuance software like Siri? No WP7/SL version yet. Invoking the SAPI dlls on the phone? No automation factory in WP7 SL. Web services using System.Speech and mic on the phone? YES! The last one was my least favorite but that works for now. I built a quick sample app to show how to do text-to-speech and speech recognition on WP7.   @eklimczak will not be happy with the developer designed UI. In this sample there is web service with provides access to the system.speech APIs in .NET. Basically its just passing around byte arrays. On the phone its using the XNA audio frameworks to play the text-to-speech stream and to record using the microphone. The code is pretty simple and you can download from the link at the end of this post. The only things to note are adjusting the WCF config to handle larger byte uploads and the Microphone API is a little weird with that 1 second buffer. It would be nice if you could just to mic.start and mic.end which would return an array of bytes instead of managing your own stream inside the buffer ready callback. Couple of downsides to this approach: Recoding from the phone has some static. Could be my code or the my mic is bad / not calibrated right. Having to make web service calls instead of local access is not ideal (Microsoft, please add an API for the SAPI dlls) Although in the context of an app like Siri its not so bad since you need to do web service lookups to get data back Speech recognition quality really depends on either a) a limited grammar set like that pizza grammar in the sample or b) training the recognizer. For the latter it would be annoying to have users train the system. Using the System.Speech stuff youd have to have a profile for each user. So until Microsoft adds some speech client APIs on the phone or Nuance releases a wp7 product, this is a decent workaround. In the future Id like to build something similar to Siri. I shall call it Iris in homage. Im a big fan of mobile speech apps because frankly its just not safe to Google while driving. Since some of my designer co-workers have been posting UI sketches for WP7, Id like to start posting some code prototypes for things I try out on the phone. That will probably last 2 weeks, but for the moment I have like 10 posts in the queue. Sample Code 100% guaranteed to work on my emulatorDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Redaction in AutoVue

    - by [email protected]
    As the trend to digitize all paper assets continues, so does the push to digitize all the processes around these assets. One such process is redaction - removing sensitive or classified information from documents. While for some this may conjure up thoughts of old CIA documents filled with nothing but blacked out pages, there are actually many uses for redaction today beyond military and government. Many companies have a need to remove names, phone numbers, social security numbers, credit card numbers, etc. from documents that are being scanned in and/or released to the public or less privileged users - insurance companies, banks and legal firms are a few examples. The process of digital redaction actually isn't that far from the old paper method: Step 1. Find a folder with a big red stamp on it labeled "TOP SECRET" Step 2. Make a copy of that document, since some folks still need to access the original contents Step 3. Black out the text or pages you want to hide Step 4. Release or distribute this new 'redacted' copy So where does a solution like AutoVue come in? Well, we've really been doing all of these things for years! 1. With AutoVue's VueLink integration and iSDK, we can integrate to virtually any content management system and view documents of almost any format with a single click. Finding the document and opening it in AutoVue: CHECK! 2. With AutoVue's markup capabilities, adding filled boxes (or other shapes) around certain text is a no-brainer. You can even leverage AutoVue's powerful APIs to automate the addition of markups over certain text or pre-defined regions using our APIs. Black out the text you want to hide: CHECK! 3. With AutoVue's conversion capabilities, you can 'burn-in' the comments into a new file, either as a TIFF, JPEG or PDF document. Burning-in the redactions avoids slip-ups like the recent (well-publicized) TSA one. Through our tight integrations, the newly created copies can be directly checked into the content management system with no manual intervention. Make a copy of that document: CHECK! 4. Again, leveraging AutoVue's integrations, we can now define rules in the system based on a user's privileges. An 'authorized' user wishing to view the document from the repository will get exactly that - no redactions. An 'unauthorized' user, when requesting to view that same document, can get redirected to open the redacted copy of the same document. Release or distribute the new 'redacted' copy: CHECK! See this movie (WMV format, 2mins, 20secs, no audio) for a quick illustration of AutoVue's redaction capabilities. It shows how redactions can be added based on text searches, manual input or pre-defined templates/regions. Let us know what you think in the comments. And remember - this is all in our flagship AutoVue product - no additional software required!

    Read the article

  • Silverlight Cream for December 11, 2010 -- #1007

    - by Dave Campbell
    In this Issue: Mike Wolf, Colin Eberhardt, Mike Snow(-2-, -3-), David Kelley(-2-, -3-), Jesse Liberty(-2-), Erik Mork, Jeff Blankenburg, Laurent Duveau, and Jeremy Likness(-2-). Above the Fold: Silverlight: "The definitive guide to Notification Window in Silverlight 4" Laurent Duveau WP7: "Making the MS Adcontrol REALLY work on phone 7" David Kelley Silverlight 5: "Silverlight 5: In the Trenches" Mike Wolf From SilverlightCream.com: Silverlight 5: In the Trenches How many people can discuss Silverlight 5 'In the Trenches' ... apparently Mike Wolf can, and that's just what he's done in the post to whet your whistle (do people say that any more?) for when we can all get our hands on the bits. Visiblox, Visifire, DynamicDataDisplay – Charting Performance Comparison Colin Eberhardt responds to reader requests, and revisits his Charting Performance after also some discussion with David Anson about the Silverlight Toolkit. This time including Dynamic Data Display which is quite impressive in the ratings... check out the post and the code. Win7 Mobile Back Arrow Key Interception The simple fact is heavy bloggers rise, like Cream, to the top of my list, and I've been missing some goodness from Mike Snow... he's blogging WP7 stuff now... first up of the 'missed' ones is this one on intercepting the Back Arrow Key. Animating the Color of an Object Switching back to Silverlight in general, Mike Snow's next post is on Animating color of an object, such as text foreground. Tombstoning on the Win7 Mobile Platform And now back to WP7, Mike Snow is discussing Tombstoning... discussing the various aspects of it, and some code to use, if you haven't gotten your head around this one yet. What I tell Designers to give me... Integrating and Digital Zen David Kelley has a post up describing what he needs from designers to get his job done... I heard him discussing this at the Firestarter, and didn't realize he had written it up... these 8 items are things learned by doing, and should be discussed with your designers. Making the MS Adcontrol REALLY work on phone 7 David Kelley also has a post up discussing how to really get the Ad control working on WP7 apps... since I've seen lots of posts about this, having a definitive explanation from someone that's doing it is a good thing. Performance Optimization on Phone 7 In a break from his norm of discussing UX, David Kelley is talking about performance on WP7 devices in this post. Windows Phone From Scratch #10 – Visual State Part 2 When I saw Jesse Liberty's latest post, I realized I had missed his Part 2 of VSM for WP7 ... don't you miss it... this completes the good stuff from number 9 :) Windows Phone From Scratch #11 – Behaviors Jesse Liberty's latest Windows Phone from Scratch is up... and he's talking about Behaviors this time out... more of an overview or introduction to behaviors, but all good Show 112: Scott Guthrie on Silverlight 5 Erik Mork's latest Sparkling Client podcast is up and he was able to get some time with Scott Guthrie at the Firestarter. What I Learned in WP7 – Issue #1 Jeff Blankenburg decided to do another series, only this one isn't promised as every day... it's "What I Learned in WP7" ... and the first is up... good interesting bits found surrounding the WP7 device. The definitive guide to Notification Window in Silverlight 4 Laurent Duveau has a great post up that will have you doing Silverlight 'toast' notifications in no time... good descriptions and source. Lessons Learned in Personal Web Page Part 1: Dynamic XAML Jeremy Likness has rebuilt his personal website in Silverlight and is sharing some of that experience on his blog. This first post discusses the dynamic content. He used Jounce, of course, and included the Silverlight Navigation Framework, and... you can download all the source Lessons Learned in Personal Web Page Part 2: Enter the Matrix Jeremy Likness's second post about building his website is all about the 'Matrix' page ... pretty cool stuff... check it out... I think it looks great Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Stream Media from Windows 7 to XP with VLC Media Player

    - by DigitalGeekery
    So you’ve got yourself a new computer with Windows 7 and you’re itching to take advantage of it’s ability to stream media across your home network. But, the rest of the family is still on Windows XP and you’re not quite ready to shell out the cash for the upgrades. Well, today we’ll show you how to easily stream media from Windows 7 to Windows XP with VLC Media Player. On the host computer running Windows 7, you’ll need to have an account set up with both a username and password. A blank password will not work. The media files will need to be located in a shared folder. Note: If the media files are located within the Public directory, or within the profile of the user account you use to log into the Windows 7 computer, they will be shared automatically. Sharing your Media Folders On your Windows 7 computer, right-click on the folder containing the files you’d like to stream and choose Properties.     On the Sharing Tab of the folder properties, click the Share button. Click OK.   Type or select from the drop down the user account you’ll use to log in, or select “Everyone” to share with all users. Then click Add. You may change the permission level, but only Read permission is required to play the media. Repeat this process for any additional folders you wish to share.    The Windows XP Client Computer Now that we’ve shared our media folders from the Windows 7 computer, we’re ready to play our files on the Windows XP computer. Download and install the VLC Media Player. (See link below) Then open VLC. Click on Media from the and select Open File… Browse your network for the shared folder that contains your media.   You’ll be prompted to log in to the host computer. Provide the credentials for a user on the Windows 7 computer. Click OK.   Select your media file and click Open.    Your media playback will begin momentarily.   This is a nice and easy way to stream media across your home network without upgrading multiple computers to Windows 7.  Plus, VLC is certainly no slouch as a Media Player. It’ll play virtually any video or audio file you can throw at it. Have you already upgraded all your home PCs to Windows 7? Check out our previous article on streaming media between Windows 7 computers on your home network. Download VLC Media Player Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add FilesShare Digital Media With Other Computers on a Home Network with Windows 7Enable Media Streaming in Windows Home Server to Windows Media PlayerInstall and Use the VLC Media Player on Ubuntu LinuxInstalling Windows Media Player Plugin for Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images

    Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >