Search Results

Search found 3467 results on 139 pages for 'win'.

Page 111/139 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

• Help understanding my hard drive / partitioning situation... Pictures Included! :)

  - by xopenex

  So I have installed windows 7, and two different distros of linux... I have read and tried to understand things like "spanned" "extended" "primary" "swap" "dev/dev2/" "GRUB" "Windows Boot Loader/Manager" etc.... I have a very very limited understanding of all of it! :) I am trying to figure out how to get all OS boot options on one Boot manager (I'm thinking it will be GRUB), because at this point when i turn on my computer, I basically get two booting options (excluding the memtest options etc)... One options is to boot one of my Linux Distros and the second option is to boot my Windows 7. When i go with the first option, Linux boots up... when i go with the second Windows 7 option, I get the "windows boot manager screen" and I can choose Windows 7 or my other installation of Linux (Ubuntu)... In addition, I did not have swap partition from my first installation of Linux, I created it during the installation of my second distro... This is a lot of info for me, but I'm guessing that you linux Gurus, pretty much understand what is going on! Hope my question makes sense.. i will try and simplify... Can i get all 3 OS's optioned to boot from one GRUB? Can i get both Linux distros to use one swap file (I have seen this possible in other threads, but because of how my disk is partitioned, i dont know if i can do this) I hope that i dont have to start all over installing one after the other. Ive got some pics that may help understand my hard drive situation! Thanks guys! :) EDIT... i had some pics, but im a new member.. so cant post them... :( here is a description of the pics... incase i can email them or post later. [grub][3] First Screen I come to after turning on computer... "Ubuntu with linux 3.2.6" (highlighted) fires up Linux perfectly... other choice at bottom of list "Windows 7 (loader) (on dev/sda1)... brings me to the next picture below.. windows boot manager [win boot mngr][6] both options here load the os selected [Disk Manager Windows][1] picture of my hard drive situation through windows disk manager utility [gparted][2] picture of my hard drive situation through "gparted" [mycomp][4] picture of my hard drive situation through "my computer" [paragon][5] one last pic of my hard drive situation through the eyes of "paragon"

  Read the article

• It’s that Time of Year Again… OPN Survey Time!

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Whether you’re still carving pumpkins or getting ready to carve a turkey, be sure to carve out your chance to win one of 5 Apple i-Pads, by taking our Oracle PartnerNetwork Survey! On October 12th, Oracle Alliances and Channels sent out invitations asking you to complete the Oracle PartnerNetwork Survey and provide feedback on Oracle’s Enablement, Partner Business Center, OPN Portal, Communications, Benefits, OPN Competency Center, Solutions Catalog and Marketing.  So, if you’re feeling as festive as we are, and received an invitation to participate, we hope you take this opportunity to provide us feedback so we can continue to drive meaningful programs and interactions with you, our partners! If you didn’t receive an invitation but still want to get the get the holidays started with your very own i-Pad, you’re welcome to send us a note at [email protected] with your candid feedback, or request to be added to the list for future surveys. The drawing for the Apple i-Pads will take place after the survey closes mid November. Thank you in advance for your participation and we look forward to receiving your response. Let the holiday season begin! The OPN Communications Team

  Read the article

• Hyper-V Server 2012 - "No Active Network Adapter Found"

  - by Vazgen

  I just installed Hyper-V Server 2012 and first thing I get when logging in to the host is "No Active Network Adapter Found". I know I have to use the following command: pnputil –i –a <inf file> I found the Realtek Network Driver for my MB for Windows 7 here: http://za.asus.com/Motherboards/AMD_AM3Plus/M5A97_PRO/#download But there is not one for Windows 8 so I tried using the Win 7 one with PnPUtil, and I got: Failed to install the driver on any of the devices on the system: No more data is available. Does this really mean I can't use Hyper-V Server 2012 with my motherboard? This is hard to believe because I installed Windows Server 2012 directly (prior to installing Hyper-V Server 2012) on this same computer and I had internet access on that server without even configuring any drivers. Ok so I went to PowerShell from cmd and typed Get-NetIPConfiguration And it said the name of my driver (Realtek) and "Disconnected". I switched the Ethernet wire from my primary computer with my server and everything was fixed. Interestingly, my primary computer connects to the internet just fine with the wire that was previously in the server, just with much slower speed. Does anyone know what could be the difference between these 2 Ethernet wires?

  Read the article

• Outlook 2010 Reminders - Can't dismiss or snooze.

  - by TomatoSandwich

  I seem to have encountered a zombie reminder that doesn't want to die. A few weeks ago I had an issue where I had a reminder from weeks gone by pop up in my Reminder window in Outlook 2010. Due in: 2 weeks overdue. Weird, I thought. So I did the usual 'Dismiss'. 2 seconds later: "1 Reminder, Due in 2 weeks overdue". Weird, I thought. So I tried snoozing it. Not 2 seconds later: "1 Reminder, Due in 2 weeks overdue". Ok, this is getting weird. Let's try 'Dismiss All'. "1 Reminder, Due in 2 weeks overdue". Fine, fine, you win Outlook. Let's open the item and delete it. "1 Reminder, Due in **3** weeks overdue". Ah, now the previous reminder in the series is popping up. Let's delete that one too. "1 Reminder, Due in **4** weeks overdue". FUUUUU-- I ended up having to delete all past occurances of a weekly reminder before the reminder removed itself. It's now a few weeks later, and what do I see? "1 Reminder, Due in 2 weeks overdue". Does anyone know if this is a known bug in Outlook 2010 Beta, where recurring events with reminders start zombifying themselves, and won't stop reminding me they exist til I decapitate (delete) them entirely?

  Read the article

• Windows Server 2008 R2 Error CAPI2 Event ID 4107

  - by umar bhatti

  I am getting following error on couple of my 2008 R2 servers. I have tried couple of fixes which didn't fix the issues. Log Name: Application Source: Microsoft-Windows-CAPI2 Date: 18/03/2013 09:48:40 Event ID: 4107 Task Category: None Level: Error Keywords: Classic User: N/A Computer: ServerName Description: Failed extract of third-party root list from auto update cab at: <http://ctldl.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab> with error: The data is invalid. . Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" /> <EventID Qualifiers="0">4107</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2013-03-18T09:48:40.169581600Z" /> <EventRecordID>8713</EventRecordID> <Correlation /> <Execution ProcessID="412" ThreadID="5288" /> <Channel>Application</Channel> <Computer>ServerName <Security /> </System> <EventData> <Data>http://ctldl.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab</Data> <Data>The data is invalid. </Data> </EventData> </Event>

  Read the article

• Apache - child process exited with status 255

  - by Brian

  I am running Windows 7 64-bit with an older version of (Apache 2.0.59) and PHP 5.2 - just switched from XP and wanted to keep the same versions. Everything will initially be working fine, but then I'll be trying to load a page and Apache crashes. I'll get an error in the browser that says "The connection to the server was reset while the page was loading." Then Apache stops running. Sometimes it can be restarted, but then crashes again on the next page load. Sometimes it can't even be restarted at all. Looking in the Apache error logs, I see a series of messages that goes something like: [notice] Apache/2.0.59 (Win32) PHP/5.2.13 configured -- resuming normal operations [notice] Server built: Jul 27 2006 15:55:03 [notice] Parent: Created child process 1220 [notice] Child 1220: Child process is running [notice] Child 1220: Acquired the start mutex. [notice] Child 1220: Starting 250 worker threads. [notice] Parent: child process exited with status 255 -- Restarting. I have just come from Win XP where I never had any problems - is this an issue with my Apache version on Win7? Or perhaps it's a configuration issue? Any help would be greatly appreciated, I've done days of research and found nothing helpful. Thanks, Brian

  Read the article

• Squid 2.7 Stable 8 on Windows 2008

  - by Sadish

  Hi all, I have a Windows 2008 SP2 Active Directory Domain, which has clients of Vista, Win 2000 XP and Windows 7 as members. I installed Squid 2.7 Stable 8 on Windows 2008 SP2 trying to configure NTLM based authentication when surfing Internet. Basically have defined 2 groups for internet allow and deny based on authorization Internet access is allowed. But after trying for over 3 weeks, seems that the authentication does not happen. The browser keeps on asking for user name & password. I would like to know if there is any solution for this. I’m totally frustrated and unable to move forward. My configuration as below from the modifying the default squid.conf Line 292 auth_param ntlm program c:/squid/libexec/mswin_ntlm_auth.exe auth_param ntlm children 5 Line 626 acl localnet proxy_auth REQUIRED src 10.0.0.1/255 acl InetAllow external win_domain_group InternetUsers acl InetDeny external win_domain_group InternetDenyGroup http_access allow InetAllow http_access deny InetDeny Comment any "acl localnet src" Line 294 external_acl_type win_domain_group ttl=120 %LOGIN c:/squid/libexec/mswin_check_lm_group.exe –G My Windows 2008 server is running on 192.168.0.203 and clients are of subnet 10.0.0.x for which I need authentication. Pls help !!!

  Read the article

• Disable Java Hardware Acceleration in windows?

  - by Odys

  I have some issues with my graphics card and I want to disable Hardware Acceleration for java apps. Everything that uses HA is displayed blurry. I've seen some tutorials on how to set this parameter -Dsun.java2d.d3d=false The problem is that the Java Control panel itself is using hardware acceleration and I cannot see anything in order to add this parameter. Edit: Went to java control panel in safe mode, added that parameter and problem continues.. Edit2: Win 7 x64 JRE 6 update 30 Edit3: my deployment.properties (after your suggestions) file is: #deployment.properties #Sun Jan 08 01:12:04 EET 2012 deployment.version=6.0 deployment.capture.mime.types=true deployment.browser.path=C\:\\Program Files (x86)\\Mozilla Firefox\\firefox.exe #Java Deployment jre's #Sun Jan 08 01:12:04 EET 2012 deployment.javaws.jre.0.registered=true deployment.javaws.jre.0.platform=1.6 deployment.javaws.jre.0.osname=Windows deployment.javaws.jre.0.path=C\:\\Program Files (x86)\\Java\\jre6\\bin\\javaw.exe deployment.javaws.jre.0.product=1.6.0_30 deployment.javaws.jre.0.osarch=x86 deployment.javaws.jre.0.location=http\://java.sun.com/products/autodl/j2se deployment.javaws.jre.0.enabled=true deployment.javaws.jre.0.args=-Dsun.java2d.d3d\=false deployment.javaws.jre.1.args=-Dsun.java2d.d3d\=false deployment.javaws.jre.0.args=-Dsun.java2d.noddraw=true deployment.javaws.jre.1.args=-Dsun.java2d.noddraw=true still hardware acceleration is enabled. Is there a possibility that applications can override these settings?

  Read the article

• Remote App Authentication Error (Code:0x507)

  - by CMK

  Hi I'm trying to get RDP services running with Windows 2008 R2. I'm at a WINXP SP3 client that was modified to run RDP with NLA. When I start the client connect to the local DC and get an authentification error (Code 0x507). I've already done the following: • Server Setup to run as a standalone local "DC" to provide Terminal services to a single application. Remote Desktop Session Host CAL License is running & operational, RD Gateway Manager w/ Local Server RAP & CAP running NLA & operational etc..... Server has NLA & temporary use of port 3389 (which is directly connected to and accessible from the internet (I am planning to change the port to 443, but want to get the current system running first). • XP Client(s): RDP-Version on win xp clients is 6.1 If had SP2, then added SP3 and edited the registry settings to allow NLA, by: Click Start, click Run, type regedit, and then press ENTER. In the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Control\Lsa In the details pane, right-click Security Packages, and then click Modify. In the Value data box, type tspkg. Leave any data that is specific to other SSPs, and then click OK. In the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Control\SecurityProviders In the details pane, right-click SecurityProviders, and then click Modify. In the Value data box, type credssp.dll. Leave any data that is specific to other SSPs, and then click OK. Exit Registry Editor. Restart the computer.

  Read the article

• Cisco AnyConnect on IOS 12.4(20)T

  - by natacado

  There are plenty of tutorials on setting up AnyConnect on an ASA unit, and a handful of links noting that IOS 12.4(15) and later support AnyConnect, but I can't seem to find any good documentation about how to setup AnyConnect on IOS; most tutorials assume you only want a clientless VPN on IOS. the best I've found is this document on Cisco's site, but it's not working for me in practice - see below. This is all on a Cisco 881W: router#show version | include Version Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 12.4(20)T1, RELEASE SOFTWARE (fc3) ROM: System Bootstrap, Version 12.4(15r)XZ2, RELEASE SOFTWARE (fc1) The old SSL VPN Client seems to install just fine: router#show webvpn install status svc SSLVPN Package SSL-VPN-Client version installed: CISCO STC win2k+ 1.0.0 1,1,4,176 Thu 08/16/2007 12:37:00.43 However, when I install the AnyConnect client, after authenticating it hangs for a while during the self-update process, and stops with an error that the "AnyConnect package unavailable or corrupted." When I try to install the AnyConnect package on the router, I'm told that it's an invalid archive: router(config)#webvpn install svc flash:/webvpn/anyconnect-win-2.3.2016-k9.pkg SSLVPN Package SSL-VPN-Client (seq:2): installed Error: Invalid Archive Does anyone have a good sample on how to get the 2.x AnyConnect clients working with a Cisco device running IOS?

  Read the article

• Getting SMB file shares working over a PPTP VPN

  - by Ben Scott

  I'm having issues getting SMB file shares working over a PPTP VPN. The server setup consists of a security device (DrayTek V3300) which passes the PPTP authentication to a SBS2003 server running RRAS. The server is the DC and provides DNS and WINS, the single NIC's name server is set to the NIC's IP (192.168...), and DHCP on the DrayTek sets the server IP as the DNS. If I create a new VPN connection in Win7, leaving everything as default apart from the server, username, password and domain, I can: ping everything by IP address resolve IPs with nslookup using their fully-qualified name, as in nslookup fileserver.mydomain.local ping machines by fully-qualified name, as in ping fileserver.mydomain.local However if I try to access a file share: within Explorer, I get "Windows cannot access ..." with "Error code: 0x80004005 Unspecified Error", using net use z: \\fileserver.mydomain.local\share, I get "System error 53 has occurred. The network path was not found." If I add the machine name to my HOSTS file I can use the file share, which is my last-ditch workaround, but I have a number of VPN users and would rather a solution that doesn't involve me trying to hand-edit system files on computers half a country away. If I set the WINS server explicitly in the connection's IPv4 settings I don't have to use the FQN to ping the machine, but that doesn't change anything else. EDIT: The PC I'm having the issue on is running Win 7 Home Premium. After more testing I actually have two other PCs that work, one W7HP, one XP Home, and another Vista PC that doesn't work (not tested as much as the others), all four on the same internet connection (behind the same router). All of them were tested with a straight-forward, all defaults, new VPN configuration.

  Read the article

• Why Hebrew letters in the address bar break the ARR gateway (Only With Explorer 8,9,10)?

  - by Noamway

  The ARR is working great in all browsers except Internet Explorer 8,9,10. When I paste Hebrew URL directly to the address bar it's working good, but when I surf (click on a simple href URL) from one Hebrew URL page to another Hebrew URL the ARR return me that error: "502 - Web server received an invalid response while acting as a gateway or proxy server." There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server. I checked it number of times including with HTTP analyzer and I saw that the "referer" is making all the problems and cause to that error. For example when I enter to that page: mydomain.com/somehebrewchars (mydomain.com/???? you will need Hebrew install) And click in the page on a link to: mydomain.com/somehebrewchars2 (mydomain.com/???????? you will need Hebrew install) I will get the error above and when you look at the referrer you will see something like that: mydomain.com/עמוד-× ×—×™×ª×” We use other proxies application to others projects and we don't have the same issue like that. For this example we used WIN 2008 and 2012 with ARR 2.5 and also 3 beta. Any help is welcome :-) Thanks, Noam

  Read the article

• Destination host unreachable - Windows Server 2008

  - by Doug

  Hi There, I'm working with a windows 2008 domain controller, which I'm having issues connecting to internet resources. A small bit of background, this is a 2008 domain controller that has been added into an existing Win 2k domain, with a goal of replacing the older computers. Both of the older controllers can still access internet resources, and so can all the clients. When I ping Google.ca from the new server, it does resolve to an ip address, but then says "Reply from 192.168.123.20: Destination host unreachable." I'm really at a lost now, I've checked and rechecked my ip configuration, the default gateway is my router, the primary DNS server is the my DC, and the secondary DNS is also my router. The DNS server on the domain has a forwarder added for the router as well. Everything on my local network works just fine, all my internal resources can be resolved. For the time being, I've stopped the Firewall service. I'm not 100% used to Server 2008 yet, but it might be a case of just missing something simple. Thanks for your time.

  Read the article

• Destination host unreachable - Windows Server 2008

  - by Doug

  Hi There, I'm working with a windows 2008 domain controller, which I'm having issues connecting to internet resources. A small bit of background, this is a 2008 domain controller that has been added into an existing Win 2k domain, with a goal of replacing the older computers. Both of the older controllers can still access internet resources, and so can all the clients. When I ping Google.ca from the new server, it does resolve to an ip address, but then says "Reply from 192.168.123.20: Destination host unreachable." I'm really at a lost now, I've checked and rechecked my ip configuration, the default gateway is my router, the primary DNS server is the my DC, and the secondary DNS is also my router. The DNS server on the domain has a forwarder added for the router as well. Everything on my local network works just fine, all my internal resources can be resolved. For the time being, I've stopped the Firewall service. I'm not 100% used to Server 2008 yet, but it might be a case of just missing something simple. Thanks for your time.

  Read the article

• PXE with WDS & Windows Server 2012 - no filename option in DHCP lease?

  - by user1799

  I'm trying to configure Windows Server 2012 (a virtual box VM) with WDS so I can PXE boot some Windows 7 VMs (also virtual box). All the machines involved are only attached to the "host only network", 192.168.56.0/24. The Server 2012 machine has been setup as an AD DS machine, has DNS installed and working along with DHCP with option 60 - PXEClient - set and WDS is set to not listen on DHCP ports. I've followed http://technet.microsoft.com/en-us/library/jj648426.aspx very closely. I've used the boot.wim and install.wim files from the Win 7 installation DVD and they're configured as 'boot' and 'installation' images respectively. When I boot the target machine, it gets an IP address, but I simply get 'no filename' and the boot won't proceed any further. I've tried setting option 66 to 192.168.56.2 (the WDS server) and option 67 to both Boot\x64\wdsnbp.com and Boot\x64\pxeboot.n12 but all to no avail. I can't seem to see anything in the event log, either. Can anyone out there spot what I'm doing wrong? Or give tips to narrow down a diagnostic?

  Read the article

• Deleted, then added user w/ same name, now logs on w/ temp profile

  - by labyrinth

  I am a new admin at a high school lab and am trying to spearhead separation of normal IT accounts from IT admin accounts. I made my normal account (e.g. ITuser) and an admin account (e.g. ITuser-adm) on the server (Win Server 2008 R2). I used both accounts on my my main desktop for about a day, but decided I hadn't set up the admin account correctly. I deleted the my admin account, then made a new one with the same name. The problem is that on my main desktop (Windows 7 Pro), whenever I log in with my admin account, it gives the following errors: Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on. (Error 1515) Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off. (Error 1511) This is more of a nuisance than anything for me, I just thought I could use the same name for a user account I'd just deleted since they would have separate SSIDs anyway. If it's less trouble, I could just make a new admin account. Or I could just keep using it as is since I don't need to be saving anything locally anyway and the typical folder redirects work fine. I'm just curious and want to understand what's going on. There are no errors listed regarding the registry.

  Read the article

• 'pskill \\hostname winlogon' might budge a server "stuck rebooting", but why?

  - by Snoi

  Question: Executing remote (Sysinternals) command... pskill \\machine winlogon ...can budge a server that is stuck rebooting, but how/why does this work? How do you know which service to kill? To recreate (e.g.): You run Windows Update, allow a reboot, and ...NOTHING! RDP gets cut off but the server does not reboot. Just about every other service seems to stay up. Further Background: I've faced this problem on VMs hosted around the planet for some years, and used various sc.exe and shutdown commands to learn the state of and attempt remote reboot of servers in such a state, with limited success. Most datacentres don't offer any way to see the true console or power off/on such machines. They charge $$ for you to call them to do such simple things after hours, when you nearly always have to run your maint tasks. e.g. NET USE \\machine\IPC$ /USER:login password sc \\machine query RpcSs sc \\machine query TermService sc \\machine query wuauserv tasklist /s machine This occasionally works for me... shutdown /m \\machine /r /f /t: 0 ...but more often than not it fails with: A system shutdown is in progress (1115). I found this question, and the answer by @Tweek, and it worked really well, but was I just lucky? Can not RDP to Win 2003 box or initiate remote restart @Tweek said to run: pskill \\hostname winlogon ...and that got me past this situation in a new way (Server 2008 R2 in my most recent case) - really useful! I just need to understand if I got lucky or there is more science here. What I'd like to know is why the winlogon process? @Livne said to use "tasklist /s HostName" to see what is the culprit, but how do you tell from the listed output? It's just a list of running tasks etc. From that I would not know what to look for, nor could I see anything about the winlogon process that suggested to my eyes that was the one to kill.

  Read the article

• ATI radeon graphics card and screen freeze problem

  - by Thomas

  recently i upgrade my machine with new hardware component. my mother board is Gigabyte, processor Intel i3 3.6 ghz, ram 4 gb, graphics card ATI radeon 4350 1 GB. my OS installed is windows XP. when i am trying to play call of duty black ops then screen gets freeze and when i try to play other game like medal of honour then suddenly game closed suddenly after 15 or 20 minutes. i am not being able to find out the problem. whether i have problem in RAM or Graphics card. i asked few hardware person and one of them told me that i should installed windows 7 rather than windows xp. is it true. please help me to understand the problem and also tell me what should i do to fix this problem. please discuss in detail. thanks in advance. Update: yes i already install lates driver for ATI radeon 4350 but still the problem persist. do i need to install windows 7 instead of win xp because my processor is intel i3.

  Read the article

• HAProxy + NodeJS gets stuck on TCP Retransmission

  - by sled

  I have a HAProxy + NodeJS + Rails Setup, I use the NodeJS Server for file upload purposes. The problem I'm facing is that if I'm uploading through haproxy to nodejs and a "TCP (Fast) Retransmission" occurs because of a lost packet the TX rate on the client drops to zero for about 5-10 secs and gets flooded with TCP Retransmissions. This does not occur if I upload to NodeJS directly (TCP Retransmission happens too but it doesn't get stuck with dozens of retransmission attempts). My test setup is a simple HTML4 FORM (method POST) with a single file input field. The NodeJS Server only reads the incoming data and does nothing else. I've tested this on multiple machines, networks, browsers, always the same issue. Here's a TCP Traffic Dump from the client while uploading a file: ..... TCP 1506 [TCP segment of a reassembled PDU] >> everything is uploading fine until: TCP 1506 [TCP Fast Retransmission] [TCP segment of a reassembled PDU] TCP 66 [TCP Dup ACK 7392#1] 63265 > http [ACK] Seq=4844161 Ack=1 Win=524280 Len=0 TSval=657047088 TSecr=79373730 TCP 1506 [TCP Retransmission] [TCP segment of a reassembled PDU] >> the last message is repeated about 50 times for >>5-10 secs<< (TX drops to 0 on client, RX drops to 0 on server) TCP 1506 [TCP segment of a reassembled PDU] >> upload continues until the next TCP Fast Retransmission and the same thing happens again The haproxy.conf (haproxy v1.4.18 stable) is the following: global log 127.0.0.1 local1 debug maxconn 4096 # Total Max Connections. This is dependent on ulimit nbproc 2 defaults log global mode http option httplog option tcplog frontend http-in bind *:80 timeout client 6000 acl is_websocket path_beg /node/ use_backend node_backend if is_websocket default_backend app_backend # Rails Server (via nginx+passenger) backend app_backend option httpclose option forwardfor timeout server 30000 timeout connect 4000 server app1 127.0.0.1:3000 # node.js backend node_backend reqrep ^([^\ ]*)\ /node/(.*) \1\ /\2 option httpclose option forwardfor timeout queue 5000 timeout server 6000 timeout connect 5000 server node1 127.0.0.1:3200 weight 1 maxconn 4096 Thanks for reading! :) Simon

  Read the article

• Windows 7 - Wireless Signal Good - Internet Often Says Limited or No Activity

  - by Anthony Trilussa Pizzo

  Hi - I have a New Dell Studio XPS latop that I hooked up in early January of 2010. The Dell Studio XPS laptop is connected to my wireless router (Belkin Wireless N). The router was purchased in Februaru of 2010 because I thought my router was bad (A D-Link router). Comcast is my ISP. Everyday, at random times, the internet will have a good signal (according to the little Win 7 icon on the taskbar) but I will receive a message saying limited or no internet access and I cannot access the internet. I have the internet setup to automatically get an IP and I did the IPCONFIG release / renew but with no success. I even had a WiFi enabled Blackberry right next to my computer and whenever the computer loses an WiFi connection, so does the Blackberry. The router isnt't bad, because the old router did the same thing - giving me limited or no internet access while working sometimes. I also tried using two other laptops in same physical position as my Dell Studio XPS laptop and they have the same problem. I am going crazy trying to figure this out as I have called the Router Company (Belkin), my ISP (Comcast), and my computer maker (Dell). Can anyone offer some suggestions and I can try them as we work through this and maybe one of the suggestion will be right one. Thanks in advance for even reading my problem. I searched for a problem similar to mine on the internet, but I have not been able to keep a steady internet connection. (Side note - I used to have an IBM thinkpad laptop and D - Link router and for years that wireless connection worked FLAWLESSLY, with the same physical set up - the laptop in my bedroom, and the router in the basement.)

  Read the article

• IIS serving static content gives 503 at random

  - by Steffen

  We're having a few issues with our image server. It's a Win 2008 running IIS 7.5 and it only serves static content: images. It has run without issues for quite a while, until recently when we disabled Output Caching, as we noticed having it enabled meant it sent no-cache host-headers to the clients (forcing them to fetch the images from the server every time) We've read quite a bit about it, and it seems IIS just works that way - either you use Output Caching or you get to use cache host-headers. Anyway having disabled the Output Cache, we now experience random 5 minutes intervals, where all requests just get a 503 Service Unavailable. During this period the "Files cached" performance counter staggers (neither increased nor decreased) and after the period all caches are flushed. You might find it weird I talk about caching, since we disabled Output Caching. The thing is we changed the ObjectTTL parameter in registry, so we cache files for 3 minutes (which has worked very well, our Disk I/O dropped significantly) So even with Output Caching disabled, we're still caching plenty of files - if we could just get rid of the random 503 it'd be perfect :-D We don't get any messages in the Windows event log during these 503 intervals, so we're pretty stumped as to what to do. Any ideas are very welcome :-)

  Read the article

• RTL8192SU Linux Issue Installing Driver

  - by s32ialx

  OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

  Read the article

• Looking for updated BIOS for '99 Gateway in order to format/recognize >127 GB HD

  - by Jeff

  I have a '99 Gateway that's apparently too old for even Gateway to acknowledge it exists. Want to use it as a media hub and put in a 320GB HD, but it will not format above 127GB even running Win XP SP3. Read somewhere that upgrading the BIOS may do the trick, but I can't find the correct BIOS, and GW has been no help. Hoping I can just upgrade the BIOS, which is 11 years old. Any help would be much appreciated! I don't know where to look, and searches have been fruitless. System info: OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600 OS Manufacturer Microsoft Corporation System Name xxxx System Manufacturer Gateway System Model TABOR_II System Type X86-based PC Processor x86 Family 6 Model 7 Stepping 3 GenuineIntel ~596 Mhz BIOS Version/Date Intel Corp. 4W4SB0X0.15A.0015.P10, 9/28/1999 SMBIOS Version 2.1 BIOS info (from a free app I located): BIOS Type: Phoenix BIOS Date: September 28th 1999 BIOS ID: 4W4SB0X0.15A.0015.P10.9909281445-None BIOS OEM: 4W4SB0X0.15A.0015.P10 Chipset: Intel 440BX/ZX rev 3 SuperIO: SMC 70x or 80x rev 0 at port 0370 Manufacturer: Gateway Motherboard: WS440BX

  Read the article

• Put one monitor of a dual monitor windows system into standby

  - by Psycogeek

  Standby not Disabled! When running 2 monitors on windows 7 or Windows XP, I would like to be able to put one of the monitors at a time into standby. The method can be manual. When running 2 monitors , the second monitor is not always needed, shutting off the monitors own power switch will turn off the monitor, that does work Ok. Problems with that are , the delay with the monitor logo at turn on, and the power switch is not very accessable, and the switch might not live forever turning it on and off so many times. Using disable methods like devcon, WIN-P and Display, causes all the windows to properly move to the other monitor. While that is what a person would want to happen so they can get hold of the windows, that is not what I want to happen, and some things on the other monitor have to be re-arranged after a re-enable. By putting it into standby mode, nothing changes other than the monitor going into standby. Disconnecting the DVI cable still can cause the system to (properly) shift all the windows over to the one monitor, just like any of the disable methods do. That makes a mess of the windows, and is so unacceptable, that I would prefer to leave the monitor on, wasting power and the hardware, when it could easily go into standby for some time. For both monitors I am using a "MonitorOff" program that puts both monitors into standby, but I can not find a utility that will put only ONE monitor into standby for the windows system. If someone comes along and suggests "ultramon" you must know for a fact that it will put One of either of the monitors into actual standby. And it does not really suit me to use ultramon, I tested it (it was nice) and I did not feel that it was a program I wanted. The 2 monitors are running off of an ATI 4890 card, they are both hooked up DVI-I, the OS is both Windows 7 (primary) and Windows XP. In addition it would also be interesting to have seperate standby activity timers, and follow mouse kind of standby changes, but any manuel method , shortcut, batch , tray, or gadget kind of operation would be a good start.

  Read the article

• How do I keep a table up to date across 4 db's to be used in SQL Replication Filtering?

  - by Refracted Paladin

  I have a Win Form, Data Entry, application that uses 4 seperate Data Bases. This is an occasionally connected app that uses Merge Replication (SQL 2005) to stay in Sync. This is working just fine. The next hurdle I am trying to tackle is adding Filters to my Publications. Right now we are replicating 70mbs, compressed, to each of our 150 subscribers when, truthfully, they only need a tiny fraction of that. Using Filters I am able to accomplish this(see code below) but I had to make a mapping table in order to do so. This mapping table consists of 3 columns. A PrimaryID(Guid), WorkerName(varchar), and ClientID(int). The problem is I need this table present in all FOUR Databases in order to use it for the filter since, to my knowledge, views or cross-db query's are not allowed in a Filter Statement. What are my options? Seems like I would set it up to be maintained in 1 Database and then use Triggers to keep it updated in the other 3 Databases. In order to be a part of the Filter I have to include that table in the Replication Set so how do I flag it appropriately. Is there a better way, altogether? SELECT <published_columns> FROM [dbo].[tblPlan] WHERE [ClientID] IN (select ClientID from [dbo].[tblWorkerOwnership] where WorkerID = SUSER_SNAME()) Which allows you to chain together Filters, this next one is below the first one so it only pulls from the first's Filtered Set. SELECT <published_columns> FROM [dbo].[tblPlan] INNER JOIN [dbo].[tblHealthAssessmentReview] ON [tblPlan].[PlanID] = [tblHealthAssessmentReview].[PlanID] P.S. - I know how illogical the DB structure sounds. I didn't make it. I inherited it and was then told to make it a "disconnected app."

  Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >