Search Results

Search found 3089 results on 124 pages for 'lock up'.

Page 112/124 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• WP7 “Phantom Data” Source Possibly Revealed?

  - by Bil Simser

  Recently there’s been rumours floating around regarding “phantom” Windows Phone 7 data being magically sent and received on the latest WP7 phones. The news has mostly been floating around twitter so I didn’t pay it much attention. The BBC Technology News picked it up so I thought I would look more into it myself seeing that we have WP7 phones and maybe there was some truth to all this (and more importantly what was the cause). Full disclosure. I don’t have a lot of data points around this. This is from looking at a few phone logs, changing the configuration and looking back again after the change. I haven’t done a clean baseline test nor have I done testing with hundreds of phones. I leave the experience up to the reader to decide. So I went spelunking into the phone logs to see what was up. Most providers will show you data usage, at least on a daily basis. I lucked out with the provider and plan in that they provide hourly breakdowns. Here’s a snapshot from my usage throughout one night. Timestamp Data Usage 12:38:30 AM 2098 Kilobytes 1:30:30 AM 2 Kilobytes 2:38:30 AM 7118 Kilobytes 3:38:30 AM 6622 Kilobytes 4:38:30 AM 76 Kilobytes 5:38:30 AM 29 Kilobytes 6:38:30 AM 19 Kilobytes 7:38:30 AM 20 Kilobytes So a few observations from this data: Data seems to be collected on a regular basis. Looking at some other people phone logs, the times vary but it’s always hourly. There’s not a tremendous amount of data here (about 16 megabytes) but it seems like a lot for 7 hours The phone was connected to my home Wifi during this period Nothing was running and the phone was in a locked state Like I said, not a lot of data but it adds up. 16MB for 7 hours = about 50MB in a 24 hour period. That’s just plain old data being collected (somewhere, somehow) and not actual usage (Marketplace, Email, Browsing, etc.). Besides, when connected to a WiFi network you shouldn’t be charged data usage from your phone company (in theory, YMMV). After reviewing the logs I made a theory that the only thing that could possibly be sending data is the Feedback feature. With no other apps running under lock, what else could it be? In Windows 7 under your Settings the last option is Feedback. This sends feedback to Microsoft to “help improve Windows Phone”. On this page you have three options: Send feedback and use my cellular data connection Send feedback and (presumably) use my WiFi connection Don’t send feedback Knowing what I know about Microsoft, they do use the feedback data. For example some of the placement and inclusion of features in Office 2007 was based on that Feedback data that Office sends (assuming you had opted in). However in the Privacy Statement (it’s long but a good read at least once in your life), the Phone manual, and every other source I could look at there is no information about how much data it’s planning to send, just that it’s sending some data and that “some data charges with your carrier may apply”. Looking back at the logs, I have to wonder. 6MB at 3:30 and *then* 7MB the next hour. That’s a lot of information. And it adds up. 50MB in a 24 hour period X 30 days puts most people over a normal 1GB plan. And frankly why am I paying for a data plan only to have 80% of it chewed up by Microsoft, with no real benefit to me. If they included porn in the 50mb daily transfer I’d be okay with this, but I don’t see any new movies on my phone. So I turned it off. Set Feedback to disabled and wait. I waited. And waited. And generally didn’t use the phone if I could. The next day I went back to look at the data usage logs from the time period after turning the feedback mechanism off. Here are the results. Timestamp Data Usage 1:19:48 PM 0 Kilobytes 2:19:48 PM 0 Kilobytes 3:19:48 PM 0 Kilobytes 4:19:48 PM 678 Kilobytes (took a phone call) 5:19:48 PM 82 Kilobytes 6:19:48 PM 88 Kilobytes 7:20:30 PM 86 Kilobytes (guess they changed their reporting time) 8:20:30 PM 86 Kilobytes 9:20:30 PM 66 Kilobytes 10:20:30 PM 67 Kilobytes 11:20:30 PM 49 Kilobytes 12:20:30 AM 32 Kilobytes 1:20:30 AM 38 Kilobytes 2:20:31 AM 18 Kilobytes 3:20:31 AM 27 Kilobytes 4:20:31 AM 86 Kilobytes 5:20:31 AM 53 Kilobytes 6:20:31 AM 22 Kilobytes 7:22:15 AM 30 Kilobytes (another reporting time change) 8:22:15 AM 29 Kilobytes 9:22:15 AM 74 Kilobytes 10:22:15 AM 154 Kilobytes (phone call) 11:22:15 AM 12 Kilobytes 12:13:27 PM 49 Kilobytes 1:13:27 PM 197 Kilobytes (phone call) Quite a *drastic* change from what Feedback was turned on. I mean for a 24 hour period (sans 3 phone calls) I consumed about 1MB. Still quite a bit of transfer going on but at least it amounts to 30MB per month, not 30MB per day! Like I said this observation is neither scientific or conclusive. You decide what to do but frankly until Microsoft makes this data transfer exempt from your data plan (like that will happen) I would just turn Feedback off. YMMV.

  Read the article

• SQL SERVER – PAGELATCH_DT, PAGELATCH_EX, PAGELATCH_KP, PAGELATCH_SH, PAGELATCH_UP – Wait Type – Day 12 of 28

  - by pinaldave

  This is another common wait type. However, I still frequently see people getting confused with PAGEIOLATCH_X and PAGELATCH_X wait types. Actually, there is a big difference between the two. PAGEIOLATCH is related to IO issues, while PAGELATCH is not related to IO issues but is oftentimes linked to a buffer issue. Before we delve deeper in this interesting topic, first let us understand what Latch is. Latches are internal SQL Server locks which can be described as very lightweight and short-term synchronization objects. Latches are not primarily to protect pages being read from disk into memory. It’s a synchronization object for any in-memory access to any portion of a log or data file.[Updated based on comment of Paul Randal] The difference between locks and latches is that locks seal all the involved resources throughout the duration of the transactions (and other processes will have no access to the object), whereas latches locks the resources during the time when the data is changed. This way, a latch is able to maintain the integrity of the data between storage engine and data cache. A latch is a short-living lock that is put on resources on buffer cache and in the physical disk when data is moved in either directions. As soon as the data is moved, the latch is released. Now, let us understand the wait stat type  related to latches. From Book On-Line: PAGELATCH_DT Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Destroy mode. PAGELATCH_EX Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Exclusive mode. PAGELATCH_KP Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Keep mode. PAGELATCH_SH Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Shared mode. PAGELATCH_UP Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Update mode. PAGELATCH_X Explanation: When there is a contention of access of the in-memory pages, this wait type shows up. It is quite possible that some of the pages in the memory are of very high demand. For the SQL Server to access them and put a latch on the pages, it will have to wait. This wait type is usually created at the same time. Additionally, it is commonly visible when the TempDB has higher contention as well. If there are indexes that are heavily used, contention can be created as well, leading to this wait type. Reducing PAGELATCH_X wait: The following counters are useful to understand the status of the PAGELATCH: Average Latch Wait Time (ms): The wait time for latch requests that have to wait. Latch Waits/sec: This is the number of latch requests that could not be granted immediately. Total Latch Wait Time (ms): This is the total latch wait time for latch requests in the last second. If there is TempDB contention, I suggest that you read the blog post of Robert Davis right away. He has written an excellent blog post regarding how to find out TempDB contention. The same blog post explains the terms in the allocation of GAM, SGAM and PFS. If there was a TempDB contention, Paul Randal explains the optimal settings for the TempDB in his misconceptions series. Trace Flag 1118 can be useful but use it very carefully. I totally understand that this blog post is not as clear as my other blog posts. I suggest if this wait stats is on one of your higher wait type. Do leave a comment or send me an email and I will get back to you with my solution for your situation. May the looking at all other wait stats and types together become effective as this wait type can help suggest proper bottleneck in your system. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• Record and Play your WebLogic Console Tasks Like a DVR

  - by james.bayer

  Automation using WebLogic Scripting Tool Today on the Oracle internal mailing list for WebLogic Server questions someone asked how to automate the configuration of the thread model for WebLogic Server and they were having trouble with the jython scripting syntax.  I’ve previously written about this feature called Work Managers and the associated constraints.  However, I did not show how to automate the process of configuring this without the console using WebLogic Scripting Tool – the jython scripting automation environment abbreviated as WLST.  I’ve written some very basic introductions to WLST before and there is also an Oracle By Example on the subject, but this is a bit more advanced.  Fear not because there is a really easy-to-use feature of the WLS console that lets you “Record” user actions just like a DVR.  Using these recordings of the web-based console, you can easily create a script even if you are unfamiliar with the WLST syntax and API.  I’m a big fan of both DVR’s and automation as can be evidenced with this old Halloween picture taken during simpler times.  Obviously the Cast Away and The Big Labowski references show some age.  I was a big Tivo fan-boy back in the day and I still think it’s the best DVR. I strongly believe that WebLogic Scripting Tool (WLST) is an absolutely essential tool for automating administration tasks in anything beyond a development environment.  Even in development environments you can make a case that it makes sense to start the automation for environments downstream.  I promise you that once you start using it for any tasks that you do even semi-regularly, you won’t go back to clicking through the console.  It’s simply so much more efficient and less error-prone to run a script. Let’s say you need to create a Work Manager and MaxThreadsConstraint – the easy way to do it is configure it in the WLS console first while capturing the commands with a recording.  See the images for the simple steps – click to enlarge. Record Console Configurations to a File Review the Recordings and Make Slight Modifications In order to make the recorded .py file directly callable as a stand-alone script I added calls to the connect() and edit() functions at the beginning and calls to disconnect() and exit() at the end – otherwise the main section of the script was provided by the console recording.  Below is the resulting file I saved as d:/temp/wm.py connect('weblogic','welcome1', 't3://localhost:7001') edit() startEdit()   cd('/SelfTuning/wl_server') cmo.createMaxThreadsConstraint('MaxThreadsConstraint-0')   cd('/SelfTuning/wl_server/MaxThreadsConstraints/MaxThreadsConstraint-0') set('Targets',jarray.array([ObjectName('com.bea:Name=examplesServer,Type=Server')], ObjectName)) cmo.setCount(5) cmo.unSet('ConnectionPoolName')   cd('/SelfTuning/wl_server') cmo.createWorkManager('WorkManager-0') cd('/SelfTuning/wl_server/WorkManagers/WorkManager-0') set('Targets',jarray.array([ObjectName('com.bea:Name=examplesServer,Type=Server')], ObjectName))   cmo.setMaxThreadsConstraint(getMBean('/SelfTuning/wl_server/MaxThreadsConstraints/MaxThreadsConstraint-0')) cmo.setIgnoreStuckThreads(false)   activate() disconnect() exit() Run the Script If you want to test it be sure to delete the Work Manager and MaxThreadConstraint that you had previously created in the console.  Do something like the following - set up the environment and tell WLST to execute the script which happens in the first 2 lines, the rest doesn’t require any user input: D:\Oracle\wls11g\wlserver_10.3\samples\domains\wl_server\bin>setDomainEnv.cmd D:\Oracle\wls11g\wlserver_10.3\samples\domains\wl_server>java weblogic.WLST d:\temp\wm.py   Initializing WebLogic Scripting Tool (WLST) ...   Welcome to WebLogic Server Administration Scripting Shell   Type help() for help on available commands   Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'examplesServer' that belongs to domain 'wl_server'.   Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead.   Location changed to edit tree. This is a writable tree with DomainMBean as the root. To make changes you will need to start an edit session via startEdit().   For more help, use help(edit)   Starting an edit session ... Started edit session, please be sure to save and activate your changes once you are done. Activating all your changes, this may take a while ... The edit lock associated with this edit session is released once the activation is completed. Activation completed Disconnected from weblogic server: examplesServer     Exiting WebLogic Scripting Tool.   Now if you go back and look in the console the changes have been made and we now have a compete script.  Of course there is a full MBean reference and you can learn the nuances of jython and WLST, but why not the WLS console do most of the work for you!  Happy scripting.

  Read the article

• Silverlight 5 &ndash; What&rsquo;s New? (Including Screenshots &amp; Code Snippets)

  - by mbcrump

  Silverlight 5 is coming next year (2011) and this blog post will tell you what you need to know before the beta ships. First, let me address people saying that it is dead after PDC 2010. I believe that it’s best to see what the market is doing, not the vendor. Below is a list of companies that are developing Silverlight 4 applications shown during the Silverlight Firestarter. Some of the companies have shipped and some haven’t. It’s just great to see the actual company names that are working on Silverlight instead of “people are developing for Silverlight”. The next thing that I wanted to point out was that HTML5, WPF and Silverlight can co-exist. In case you missed Scott Gutherie’s keynote, they actually had a slide with all three stacked together. This shows Microsoft will be heavily investing in each technology.  Even I, a Silverlight developer, am reading Pro HTML5. Microsoft said that according to the Silverlight Feature Voting site, 21k votes were entered. Microsoft has implemented about 70% of these votes in Silverlight 5. That is an amazing number, and I am crossing my fingers that Microsoft bundles Silverlight with Windows 8. Let’s get started… what’s new in Silverlight 5? I am going to show you some great application and actual code shown during the Firestarter event. Media Hardware Video Decode – Instead of using CPU to decode, we will offload it to GPU. This will allow netbooks, etc to play videos. Trickplay – Variable Speed Playback – Pitch Correction (If you speed up someone talking they won’t sound like a chipmunk). Power Management – Less battery when playing video. Screensavers will no longer kick in if watching a video. If you pause a video then screensaver will kick in. Remote Control Support – This will allow users to control playback functions like Pause, Rewind and Fastforward. IIS Media Services 4 has shipped and now supports Azure. Data Binding Layout Transitions – Just with a few lines of XAML you can create a really rich experience that is not using Storyboards or animations. RelativeSource FindAncestor – Ancestor RelativeSource bindings make it much easier for a DataTemplate to bind to a property on a container control. Custom Markup Extensions – Markup extensions allow code to be run at XAML parse time for both properties and event handlers. This is great for MVVM support. Changing Styles during Runtime By Binding in Style Setters – Changing Styles at runtime used to be a real pain in Silverlight 4, now it’s much easier. Binding in style setters allows bindings to reference other properties. XAML Debugging – Below you can see that we set a breakpoint in XAML. This shows us exactly what is going on with our binding.  WCF & RIA Services WS-Trust Support – Taken from Wikipedia: WS-Trust is a WS-* specification and OASIS standard that provides extensions to WS-Security, specifically dealing with the issuing, renewing, and validating of security tokens, as well as with ways to establish, assess the presence of, and broker trust relationships between participants in a secure message exchange. You can reduce network latency by using a background thread for networking. Supports Azure now.  Text and Printing Improved text clarity that enables better text rendering. Multi-column text flow, Character tracking and leading support, and full OpenType font support.  Includes a new Postscript Vector Printing API that provides control over what you print . Pivot functionality baked into Silverlight 5 SDK. Graphics Immediate mode graphics support that will enable you to use the GPU and 3D graphics supports. Take a look at what was shown in the demos below. 1) 3D view of the Earth – not really a real-world application though. A doctor’s portal. This demo really stood out for me as it shows what we can do with the 3D / GPU support. Out of Browser OOB applications can now create and manage childwindows as shown in the screenshot below.  Trusted OOB applications can use P/Invoke to call Win32 APIs and unmanaged libraries.  Enterprise Group Policy Support allow enterprises to lock down or up the sandbox capabilities of Silverlight 5 applications. In this demo, he tore the “notes” off of the application and it appeared in a new window. See the black arrow below. In this demo, he connected a USB Device which fired off a local Win32 application that provided the data off the USB stick to Silverlight. Another demo of a Silverlight 5 application exporting data right into Excel running inside of browser. Testing They demoed Coded UI, which is available now in the Visual Studio Feature Pack 2. This will allow you to create automated testing without writing any code manually. Performance: Microsoft has worked to improve the Silverlight startup time. Silverlight 5 provides 64-bit browser support.  Silverlight 5 also provides IE9 Hardware acceleration.   I am looking forward to Silverlight 5 and I hope you are too. Thanks for reading and I hope you visit again soon.  Subscribe to my feed CodeProject

  Read the article

• some files just wont install- linux-image-3.5.0-42-generic

  - by jatin

  It gives the following details of the package operation failing after using the sofware updater on 12.10: installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... (Reading database ... (Reading database ... 217566 files and directories currently installed.) Preparing to replace linux-image-3.5.0-36-generic 3.5.0-36.57~precise1 (using .../linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Done. Unpacking replacement linux-image-3.5.0-36-generic ... dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb (--unpack): unable to make backup link of `./boot/System.map-3.5.0-36-generic' before installing new version: Operation not permitted No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-36-generic /boot/vmlinuz-3.5.0-36-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-36-generic /boot/vmlinuz-3.5.0-36-generic Preparing to replace linux-image-3.5.0-42-generic 3.5.0-42.65~precise1 (using .../linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Done. Unpacking replacement linux-image-3.5.0-42-generic ... dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb (--unpack): unable to make backup link of `./boot/System.map-3.5.0-42-generic' before installing new version: Operation not permitted No apport report written because MaxReports is reached already Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic Preparing to replace memtest86+ 4.20-1.1ubuntu1 (using .../memtest86+_4.20-1.1ubuntu2.1_amd64.deb) ... Unpacking replacement memtest86+ ... dpkg: error processing /var/cache/apt/archives/memtest86+_4.20-1.1ubuntu2.1_amd64.deb (--unpack): unable to make backup link of `./boot/memtest86+.bin' before installing new version: Operation not permitted No apport report written because MaxReports is reached already locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb /var/cache/apt/archives/memtest86+_4.20-1.1ubuntu2.1_amd64.deb Error in function: Output of df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda6 38G 6.5G 30G 19% / udev 3.5G 4.0K 3.5G 1% /dev tmpfs 1.5G 924K 1.5G 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 3.6G 296K 3.6G 1% /run/shm none 100M 64K 100M 1% /run/user /dev/sda1 197M 87M 111M 44% /boot /dev/sda5 243G 971M 230G 1% /home

  Read the article

• Monitoring ASP.NET Application

  - by imran_ku07

      Introduction:          There are times when you may need to monitor your ASP.NET application's CPU and memory consumption, so that you can fine-tune your ASP.NET application(whether Web Form, MVC or WebMatrix). Also, sometimes you may need to see all the exceptions(and their details) of your application raising, whether they are handled or not. If you are creating an ASP.NET application in .NET Framework 4.0, then you can easily monitor your application's CPU or memory consumption and see how many exceptions your application raising. In this article I will show you how you can do this.       Description:           With .NET Framework 4.0, you can turn on the monitoring of CPU and memory consumption by setting AppDomain.MonitoringEnabled property to true. Also, in .NET Framework 4.0, you can register a callback method to AppDomain.FirstChanceException event to monitor the exceptions being thrown within your application's AppDomain. Turning on the monitoring and registering a callback method will add some additional overhead to your application, which will hurt your application performance. So it is better to turn on these features only if you have following properties in web.config file,   <add key="AppDomainMonitoringEnabled" value="true"/> <add key="FirstChanceExceptionMonitoringEnabled" value="true"/>             In case if you wonder what does FirstChanceException mean. It simply means the first notification of an exception raised by your application. Even CLR invokes this notification before the catch block that handles the exception. Now just update global.asax.cs file as,   string _item = "__RequestExceptionKey"; protected void Application_Start() { SetupMonitoring(); } private void SetupMonitoring() { bool appDomainMonitoringEnabled, firstChanceExceptionMonitoringEnabled; bool.TryParse(ConfigurationManager.AppSettings["AppDomainMonitoringEnabled"], out appDomainMonitoringEnabled); bool.TryParse(ConfigurationManager.AppSettings["FirstChanceExceptionMonitoringEnabled"], out firstChanceExceptionMonitoringEnabled); if (appDomainMonitoringEnabled) { AppDomain.MonitoringIsEnabled = true; } if (firstChanceExceptionMonitoringEnabled) { AppDomain.CurrentDomain.FirstChanceException += (object source, FirstChanceExceptionEventArgs e) => { if (HttpContext.Current == null)// If no context available, ignore it return; if (HttpContext.Current.Items[_item] == null) HttpContext.Current.Items[_item] = new RequestException { Exceptions = new List<Exception>() }; (HttpContext.Current.Items[_item] as RequestException).Exceptions.Add(e.Exception); }; } } protected void Application_EndRequest() { if (Context.Items[_item] != null) { //Only add the request if atleast one exception is raised var reqExc = Context.Items[_item] as RequestException; reqExc.Url = Request.Url.AbsoluteUri; Application.Lock(); if (Application["AllExc"] == null) Application["AllExc"] = new List<RequestException>(); (Application["AllExc"] as List<RequestException>).Add(reqExc); Application.UnLock(); } }               Now browse to Monitoring.cshtml file, you will see the following screen,                            The above screen shows you the total bytes allocated, total bytes in use and CPU usage of your application. The above screen also shows you all the exceptions raised by your application which is very helpful for you. I have uploaded a sample project on github at here. You can find Monitoring.cshtml file on this sample project. You can use this approach in ASP.NET MVC, ASP.NET WebForm and WebMatrix application.       Summary:          This is very important for administrators/developers to manage and administer their web application after deploying to production server. This article will help administrators/developers to see the memory and CPU usage of their web application. This will also help administrators/developers to see all the exceptions your application is throwing whether they are swallowed or not. Hopefully you will enjoy this article too.   SyntaxHighlighter.all()

  Read the article

• Why does setting a geometry shader cause my sprites to vanish?

  - by ChaosDev

  My application has multiple screens with different tasks. Once I set a geometry shader to the device context for my custom terrain, it works and I get the desired results. But then when I get back to the main menu, all sprites and text disappear. These sprites don't dissappear when I use pixel and vertex shaders. The sprites are being drawn through D3D11, of course, with specified view and projection matrices as well an input layout, vertex, and pixel shader. I'm trying DeviceContext->ClearState() but it does not help. Any ideas? void gGeometry::DrawIndexedWithCustomEffect(gVertexShader*vs,gPixelShader* ps,gGeometryShader* gs=nullptr) { unsigned int offset = 0; auto context = mp_D3D->mp_Context; //set topology context->IASetPrimitiveTopology(m_Topology); //set input layout context->IASetInputLayout(mp_inputLayout); //set vertex and index buffers context->IASetVertexBuffers(0,1,&mp_VertexBuffer->mp_Buffer,&m_VertexStride,&offset); context->IASetIndexBuffer(mp_IndexBuffer->mp_Buffer,mp_IndexBuffer->m_DXGIFormat,0); //send constant buffers to shaders context->VSSetConstantBuffers(0,vs->m_CBufferCount,vs->m_CRawBuffers.data()); context->PSSetConstantBuffers(0,ps->m_CBufferCount,ps->m_CRawBuffers.data()); if(gs!=nullptr) { context->GSSetConstantBuffers(0,gs->m_CBufferCount,gs->m_CRawBuffers.data()); context->GSSetShader(gs->mp_D3DGeomShader,0,0);//after this call all sprites disappear } //set shaders context->VSSetShader( vs->mp_D3DVertexShader, 0, 0 ); context->PSSetShader( ps->mp_D3DPixelShader, 0, 0 ); //draw context->DrawIndexed(m_indexCount,0,0); } //sprites void gSpriteDrawer::Draw(gTexture2D* texture,const RECT& dest,const RECT& source, const Matrix& spriteMatrix,const float& rotation,Vector2d& position,const Vector2d& origin,const Color& color) { VertexPositionColorTexture* verticesPtr; D3D11_MAPPED_SUBRESOURCE mappedResource; unsigned int TriangleVertexStride = sizeof(VertexPositionColorTexture); unsigned int offset = 0; float halfWidth = ( float )dest.right / 2.0f; float halfHeight = ( float )dest.bottom / 2.0f; float z = 0.1f; int w = texture->Width(); int h = texture->Height(); float tu = (float)source.right/(w); float tv = (float)source.bottom/(h); float hu = (float)source.left/(w); float hv = (float)source.top/(h); Vector2d t0 = Vector2d( hu+tu, hv); Vector2d t1 = Vector2d( hu+tu, hv+tv); Vector2d t2 = Vector2d( hu, hv+tv); Vector2d t3 = Vector2d( hu, hv+tv); Vector2d t4 = Vector2d( hu, hv); Vector2d t5 = Vector2d( hu+tu, hv); float ex=(dest.right/2)+(origin.x); float ey=(dest.bottom/2)+(origin.y); Vector4d v4Color = Vector4d(color.r,color.g,color.b,color.a); VertexPositionColorTexture vertices[] = { { Vector3d( dest.right-ex, -ey, z),v4Color, t0}, { Vector3d( dest.right-ex, dest.bottom-ey , z),v4Color, t1}, { Vector3d( -ex, dest.bottom-ey , z),v4Color, t2}, { Vector3d( -ex, dest.bottom-ey , z),v4Color, t3}, { Vector3d( -ex, -ey , z),v4Color, t4}, { Vector3d( dest.right-ex, -ey , z),v4Color, t5}, }; auto mp_context = mp_D3D->mp_Context; // Lock the vertex buffer so it can be written to. mp_context->Map(mp_vertexBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource); // Get a pointer to the data in the vertex buffer. verticesPtr = (VertexPositionColorTexture*)mappedResource.pData; // Copy the data into the vertex buffer. memcpy(verticesPtr, (void*)vertices, (sizeof(VertexPositionColorTexture) * 6)); // Unlock the vertex buffer. mp_context->Unmap(mp_vertexBuffer, 0); //set vertex shader mp_context->IASetVertexBuffers( 0, 1, &mp_vertexBuffer, &TriangleVertexStride, &offset); //set texture mp_context->PSSetShaderResources( 0, 1, &texture->mp_SRV); //set matrix to shader mp_context->UpdateSubresource(mp_matrixBuffer, 0, 0, &spriteMatrix, 0, 0 ); mp_context->VSSetConstantBuffers( 0, 1, &mp_matrixBuffer); //draw sprite mp_context->Draw( 6, 0 ); }

  Read the article

• Out of disk space - /boot at 100%

  - by uvasal

  My /boot is at 100%. When I run aptitude search ~ilinux-image I'm getting loads of unused images. When I try to delete one of them (after checking which one is currently in use by doing uname -r), e.g apt-get autoremove linux-image-3.2.0-44-generic I get: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-headers-generic (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed linux-server : Depends: linux-headers-server (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). And running apt-get -f install throws No space left on device. I've also tried doing apt-get purge but I am getting the same thing. Output of df -h and dpkg -l linux-*.: root@hb2088:/srv/www# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 9.4G 3.0G 6.0G 34% / udev 301M 4.0K 301M 1% /dev tmpfs 124M 228K 124M 1% /run none 5.0M 0 5.0M 0% /run/lock none 309M 0 309M 0% /run/shm /dev/sda1 92M 91M 0 100% /boot root@hb2088:/srv/www# dpkg -l linux-* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-====================================================-====================================================-======================================================================================================================== un linux-doc-3.2.0 <none> (no description available) ii linux-firmware 1.79.6 Firmware for Linux kernel drivers iU linux-generic 3.2.0.51.61 Complete Generic Linux kernel un linux-headers <none> (no description available) un linux-headers-3 <none> (no description available) un linux-headers-3.0 <none> (no description available) ii linux-headers-3.2.0-44 3.2.0-44.69 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-44-generic 3.2.0-44.69 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-45 3.2.0-45.70 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-45-generic 3.2.0-45.70 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-48 3.2.0-48.74 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-48-generic 3.2.0-48.74 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-51 3.2.0-51.77 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-51-generic 3.2.0-51.77 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-52 3.2.0-52.78 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-52-generic 3.2.0-52.78 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-3.2.0-54 3.2.0-54.82 Header files related to Linux kernel version 3.2.0 iU linux-headers-3.2.0-54-generic 3.2.0-54.82 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-generic 3.2.0.54.64 Generic Linux kernel headers iU linux-headers-server 3.2.0.54.64 Linux kernel headers on Server Equipment. un linux-image <none> (no description available) un linux-image-3.0 <none> (no description available) ii linux-image-3.2.0-44-generic 3.2.0-44.69 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-45-generic 3.2.0-45.70 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-48-generic 3.2.0-48.74 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-51-generic 3.2.0-51.77 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-52-generic 3.2.0-52.78 Linux kernel image for version 3.2.0 on 64 bit x86 SMP in linux-image-3.2.0-54-generic <none> (no description available) iU linux-image-generic 3.2.0.51.61 Generic Linux kernel image iU linux-image-server 3.2.0.51.61 Linux kernel image on Server Equipment. un linux-initramfs-tool <none> (no description available) un linux-kernel-headers <none> (no description available) un linux-kernel-log-daemon <none> (no description available) ii linux-libc-dev 3.2.0-52.78 Linux Kernel Headers for development un linux-restricted-common <none> (no description available) iU linux-server 3.2.0.51.61 Complete Linux kernel on Server Equipment. un linux-source-3.2.0 <none> (no description available) un linux-tools <none> (no description available) Output of du -sh /boot/*: root@hb2088:~# du -sh /boot/* 781K /boot/abi-3.2.0-44-generic 781K /boot/abi-3.2.0-45-generic 781K /boot/abi-3.2.0-48-generic 781K /boot/abi-3.2.0-51-generic 781K /boot/abi-3.2.0-52-generic 139K /boot/config-3.2.0-44-generic 139K /boot/config-3.2.0-45-generic 139K /boot/config-3.2.0-48-generic 139K /boot/config-3.2.0-51-generic 139K /boot/config-3.2.0-52-generic 1.6M /boot/grub 14M /boot/initrd.img-3.2.0-44-generic 14M /boot/initrd.img-3.2.0-45-generic 14M /boot/initrd.img-3.2.0-48-generic 12K /boot/lost+found 174K /boot/memtest86+.bin 176K /boot/memtest86+_multiboot.bin 2.8M /boot/System.map-3.2.0-44-generic 2.8M /boot/System.map-3.2.0-45-generic 2.8M /boot/System.map-3.2.0-48-generic 2.8M /boot/System.map-3.2.0-51-generic 2.8M /boot/System.map-3.2.0-52-generic 4.8M /boot/vmlinuz-3.2.0-44-generic 4.8M /boot/vmlinuz-3.2.0-45-generic 4.8M /boot/vmlinuz-3.2.0-48-generic 4.8M /boot/vmlinuz-3.2.0-51-generic 4.8M /boot/vmlinuz-3.2.0-52-generic

  Read the article

• Slow boot on Ubuntu 12.04

  - by Hailwood

  My Ubuntu is booting really slow (Windows is booting faster...). I am using Ubuntu a Dell Inspiron 1545 Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, 4GB Ram, 500GB HDD running Ubuntu 12.04 with gnome-shell 3.4.1. After running dmesg the culprit seems to be this section, in particular the last three lines: [26.557659] ADDRCONF(NETDEV_UP): eth0: link is not ready [26.565414] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.355355] Console: switching to colour frame buffer device 170x48 [27.362346] fb0: radeondrmfb frame buffer device [27.362347] drm: registered panic notifier [27.362357] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [27.617435] init: udev-fallback-graphics main process (1049) terminated with status 1 [30.064481] init: plymouth-stop pre-start process (1500) terminated with status 1 [51.708241] CE: hpet increased min_delta_ns to 20113 nsec [59.448029] eth2: no IPv6 routers present But I have no idea how to start debugging this. sudo lshw -C video $ sudo lshw -C video *-display description: VGA compatible controller product: RV710 [Mobility Radeon HD 4300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:48 memory:e0000000-efffffff ioport:de00(size=256) memory:f6df0000-f6dfffff memory:f6d00000-f6d1ffff After loading the propriety driver my new dmesg log is below (starting from the first major time gap): [2.983741] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [25.094327] ADDRCONF(NETDEV_UP): eth0: link is not ready [25.119737] udevd[520]: starting version 175 [25.167086] lp: driver loaded but no devices found [25.215341] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [25.215345] Disabling lock debugging due to kernel taint [25.231924] wmi: Mapper loaded [25.318414] lib80211: common routines for IEEE802.11 drivers [25.318418] lib80211_crypt: registered algorithm 'NULL' [25.331631] [fglrx] Maximum main memory to use for locked dma buffers: 3789 MBytes. [25.332095] [fglrx] vendor: 1002 device: 9552 count: 1 [25.334206] [fglrx] ioport: bar 1, base 0xde00, size: 0x100 [25.334229] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [25.334235] pci 0000:01:00.0: setting latency timer to 64 [25.337109] [fglrx] Kernel PAT support is enabled [25.337140] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [25.342803] Adding 4189180k swap on /dev/sda7. Priority:-1 extents:1 across:4189180k [25.364031] type=1400 audit(1338241723.027:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=606 comm="apparmor_parser" [25.364491] type=1400 audit(1338241723.031:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser" [25.364760] type=1400 audit(1338241723.031:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser" [25.394328] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [25.394343] wl 0000:0c:00.0: setting latency timer to 64 [25.415531] acpi device:36: registered as cooling_device2 [25.416688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/LNXVIDEO:00/input/input6 [25.416795] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [25.416865] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [25.425133] lib80211_crypt: registered algorithm 'TKIP' [25.448058] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [25.448321] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [25.448353] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [25.738867] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38 [25.761213] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [25.761406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [25.783432] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [25.908318] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [25.928155] input: Dell WMI hotkeys as /devices/virtual/input/input9 [25.960561] udevd[543]: renamed network interface eth1 to eth2 [26.285688] init: failsafe main process (835) killed by TERM signal [26.396426] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10 [26.423108] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [26.511297] Bluetooth: Core ver 2.16 [26.511383] NET: Registered protocol family 31 [26.511385] Bluetooth: HCI device and connection manager initialized [26.511388] Bluetooth: HCI socket layer initialized [26.511391] Bluetooth: L2CAP socket layer initialized [26.512079] Bluetooth: SCO socket layer initialized [26.530164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [26.530168] Bluetooth: BNEP filters: protocol multicast [26.553893] type=1400 audit(1338241724.219:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=928 comm="apparmor_parser" [26.554860] Bluetooth: RFCOMM TTY layer initialized [26.554866] Bluetooth: RFCOMM socket layer initialized [26.554868] Bluetooth: RFCOMM ver 1.11 [26.557910] type=1400 audit(1338241724.223:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=927 comm="apparmor_parser" [26.559166] type=1400 audit(1338241724.223:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser" [26.559574] type=1400 audit(1338241724.223:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser" [26.575519] type=1400 audit(1338241724.239:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=931 comm="apparmor_parser" [26.581100] type=1400 audit(1338241724.247:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=931 comm="apparmor_parser" [26.582794] type=1400 audit(1338241724.247:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=929 comm="apparmor_parser" [26.605672] ppdev: user-space parallel port driver [27.592475] sky2 0000:09:00.0: eth0: enabling interface [27.604329] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.606962] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.852509] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [27.852513] vesafb: scrolling: redraw [27.852515] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [27.852523] mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining [27.852527] mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining [27.852531] mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining [27.852534] mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining [27.852538] mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining [27.852541] mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining [27.852544] mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining [27.852548] mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining [27.852551] mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining [27.852554] mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining [27.852558] mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining [27.853154] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005580000, using 3072k, total 3072k [27.853405] Console: switching to colour frame buffer device 128x48 [27.853426] fb0: VESA VGA frame buffer device [28.539800] fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X [28.540552] [fglrx] Firegl kernel thread PID: 1168 [28.540679] [fglrx] Firegl kernel thread PID: 1169 [28.540789] [fglrx] Firegl kernel thread PID: 1170 [28.540932] [fglrx] IRQ 48 Enabled [29.845620] [fglrx] Gart USWC size:1236 M. [29.845624] [fglrx] Gart cacheable size:489 M. [29.845629] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [29.845632] [fglrx] Reserved FB block: Unshared offset:fc21000, size:3df000 [29.845635] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [59.700023] eth2: no IPv6 routers present

  Read the article

• .NET 4: &ldquo;Slim&rdquo;-style performance boost!

  - by Vitus

  RTM version of .NET 4 and Visual Studio 2010 is available, and now we can do some test with it. Parallel Extensions is one of the most valuable part of .NET 4.0. It’s a set of good tools for easily consuming multicore hardware power. And it also contains some “upgraded” sync primitives – Slim-version. For example, it include updated variant of widely known ManualResetEvent. For people, who don’t know about it: you can sync concurrency execution of some pieces of code with this sync primitive. Instance of ManualResetEvent can be in 2 states: signaled and non-signaled. Transition between it possible by Set() and Reset() methods call. Some shortly explanation: Thread 1 Thread 2 Time mre.Reset(); mre.WaitOne(); //code execution 0 //wating //code execution 1 //wating //code execution 2 //wating //code execution 3 //wating mre.Set(); 4 //code execution //… 5 Upgraded version of this primitive is ManualResetEventSlim. The idea in decreasing performance cost in case, when only 1 thread use it. Main concept in the “hybrid sync schema”, which can be done as following:   internal sealed class SimpleHybridLock : IDisposable { private Int32 m_waiters = 0; private AutoResetEvent m_waiterLock = new AutoResetEvent(false);   public void Enter() { if (Interlocked.Increment(ref m_waiters) == 1) return; m_waiterLock.WaitOne(); }   public void Leave() { if (Interlocked.Decrement(ref m_waiters) == 0) return; m_waiterLock.Set(); }   public void Dispose() { m_waiterLock.Dispose(); } } It’s a sample from Jeffry Richter’s book “CLR via C#”, 3rd edition. Primitive SimpleHybridLock have two public methods: Enter() and Leave(). You can put your concurrency-critical code between calls of these methods, and it would executed in only one thread at the moment. Code is really simple: first thread, called Enter(), increase counter. Second thread also increase counter, and suspend while m_waiterLock is not signaled. So, if we don’t have concurrent access to our lock, “heavy” methods WaitOne() and Set() will not called. It’s can give some performance bonus. ManualResetEvent use the similar idea. Of course, it have more “smart” technics inside, like a checking of recursive calls, and so on. I want to know a real difference between classic ManualResetEvent realization, and new –Slim. I wrote a simple “benchmark”: class Program { static void Main(string[] args) { ManualResetEventSlim mres = new ManualResetEventSlim(false); ManualResetEventSlim mres2 = new ManualResetEventSlim(false);   ManualResetEvent mre = new ManualResetEvent(false);   long total = 0; int COUNT = 50;   for (int i = 0; i < COUNT; i++) { mres2.Reset(); Stopwatch sw = Stopwatch.StartNew();   ThreadPool.QueueUserWorkItem((obj) => { //Method(mres, true); Method2(mre, true); mres2.Set(); }); //Method(mres, false); Method2(mre, false);   mres2.Wait(); sw.Stop();   Console.WriteLine("Pass {0}: {1} ms", i, sw.ElapsedMilliseconds); total += sw.ElapsedMilliseconds; }   Console.WriteLine(); Console.WriteLine("==============================="); Console.WriteLine("Done in average=" + total / (double)COUNT); Console.ReadLine(); }   private static void Method(ManualResetEventSlim mre, bool value) { for (int i = 0; i < 9000000; i++) { if (value) { mre.Set(); } else { mre.Reset(); } } }   private static void Method2(ManualResetEvent mre, bool value) { for (int i = 0; i < 9000000; i++) { if (value) { mre.Set(); } else { mre.Reset(); } } } } I use 2 concurrent thread (the main thread and one from thread pool) for setting and resetting ManualResetEvents, and try to run test COUNT times, and calculate average execution time. Here is the results (I get it on my dual core notebook with T7250 CPU and Windows 7 x64): ManualResetEvent ManualResetEventSlim Difference is obvious and serious – in 10 times! So, I think preferable way is using ManualResetEventSlim, because not always on calling Set() and Reset() will be called “heavy” methods for working with Windows kernel-mode objects. It’s a small and nice improvement! ;)

  Read the article

• The standards that fail us and the intellectual bubble

  - by Jeff

  There has been a great deal of noise in the techie community about standards, and a sudden and unexplainable hate for Flash. This noise isn't coming from consumers... the countless soccer moms, teens and your weird uncle Bob, it's coming from the people who build (or at least claim to build) the stuff those consumers consume. If you could survey the position of consumers on the topic, they'd likely tell you that they just want stuff on the Web to work.The noise goes something like this: Web standards are the correct and right thing to use across the Intertubes, and anything not a part of those standards (Flash) is bad. Furthermore, the more recent noise is centered around the idea that HTML 5, along with Javascript, is the right thing to use. The arguments against Flash are, well, the truth is I haven't seen a good argument. I see anecdotal nonsense about high CPU usage and things I'd never think to check when I'm watching Piano Cat on YouTube, but these aren't arguments to me. Sure, I've seen it crash a browser a few times, but it's totally rare.But let's go back to standards. Yes, standards have played an important role in establishing the ubiquity of the Web. The protocols themselves, TCP/IP and HTTP, have been critical. HTML, which has served us well for a very long time, established an incredible foundation. Javascript did an OK job, and thanks to clever programmers writing great frameworks like JQuery, is becoming more and more useful. CSS is awful (there, I said it, I feel SO much better), and I'll never understand why it's so disconnected and different from anything else. It doesn't help that it's so widely misinterpreted by different browsers. Still, there's no question that standards are a good thing, and they've been good for the Web, consumers and publishers alike.HTML 4 has been with us for more than a decade. In Web years, that might as well be 80. HTML 5, contrary to popular belief, is not a standard, and likely won't be for many years to come. In fact, the Web hasn't really evolved at all in terms of its standards. The tools that generate the standard markup and script have, but at the end of the day, we're still living with standards that are more than ten years old. The "official" standards process has failed us.The Web evolved anyway, and did not wait for standards bodies to decide what to do next. It evolved in part because Macromedia, then Adobe, kept evolving Flash. In the earlier days, it mostly just did obnoxious splash pages, but then it started doing animation, and then rich apps as they added form input. Eventually it found its killer app: video. Now more than 95% of browsers have Flash installed. Consumers are better for it.But I'll do it one better... I'll go out on a limb and say that Flash is a standard. If it's that pervasive, I don't care what you tell me, it's a standard. Just because a company owns it doesn't mean that it's evil or not a standard. And hey, it pains me to say that as a developer, because I think the dev tools are the suck (more on that in a minute). But again, consumers don't care. They don't even pay for Flash. The bottom line is that if I put something Flash based on the Internet, it's likely that my audience will see it.And what about the speed of standards owned by a company? Look no further than Silverlight. Silverlight 2 (which I consider the "real" start to the story) came out about a year and a half ago. Now version 4 is out, and it has come a very long way in its capabilities. If you believe Riastats.com, more than half of browsers have it now. It didn't have to wait for standards bodies and nerds drafting documents, it's out today. At this rate, Silverlight will be on version 6 or 7 by the time HTML 5 is a ratified standard.Back to the noise, one of the things that has continually disappointed me about this profession is the number of people who get stuck in an intellectual bubble, color it with dogmatic principles, and completely ignore the actual marketplace where this stuff all has to live. We aren't machines; Binary thinking that forces us to choose between "open standards" and "proprietary lock-in" (the most loaded b.s. FUD term evar) isn't smart at all. The truth is that the <object> tag has allowed us to build incredible stuff on top of the old standards, and consumers have benefitted greatly. Consumer desire, capitalism, and yes, standards ratified by nerds who think about this stuff for years have all played a role in the broad adoption of the Interwebs.We could all do without the noise. At the end of the day, I'm going to build stuff for the Web that's good for my users, and I'm not going to base my decisions on a techie bubble religion. Imagine what the brilliant minds behind the noise could do for the Web if they joined me in that pursuit.

  Read the article

• Stand-Up Desk 2012 Update

  - by BuckWoody

  One of the more popular topics here on my technical blog doesn't have to do with technology, per-se - it's about the choice I made to go to a stand-up desk work environment. If you're interested in the history of those, check here: Stand-Up Desk Part One Stand-Up Desk Part Two I have made some changes and I was asked to post those here.Yes, I'm still standing - I think the experiment has worked well, so I'm continuing to work this way. I've become so used to it that I notice when I sit for a long time. If I'm flying, or driving a long way, or have long meetings, I take breaks to stand up and move around. That being said, I don't stand as much as I did. I started out by standing the entire day - which did not end well. As you can read in my second post, I found that sitting down for a few minutes each hour worked out much better. And over time I would say that I now stand about 70-80% of the day, depending on the day. Some days I don't even notice I'm standing, so I don't sit as often. Other days I find that I really tire quickly - so I sit more often. But in both cases, I stand more than I sit. In the first post you can read about how I used a simple coffee-table from Ikea to elevate my desktop to the right height. I then adjusted the height where I stand by using a small plastic square and some carpet. Over time I found this did not work as well as I'd like. The primary reason is that the front of these are at the same depth - so my knees would hit the desk or table when I sat down. Also, the desk was at a certain height, and I had to adjust, rather than the other way around.  Also, I like a lot of surface area on top of a desk - almost more of a table. Routing cables and wiring was a pain, and of course moving it was out of the question.   So I've changed what I use. I found a perfect solution for what I was looking for - industrial wire shelving: I bought one, built only half of it (for the right height I wanted) and arranged the shelves the way I wanted. I then got a 5'x4' piece of wood from Lowes, and mounted it to where the top was balanced, but had an over-hang  I could get my knees under easily.My wife sewed a piece of fake-leather for the top. This arrangement provides the following benefits: Very strong Rolls easily, wheels can lock to prevent rolling Long, wide shelves Wire-frame allows me to route any kind of wiring and other things all over the desk I plugged in my UPS and ran it's longer power-cable to the wall outlet. I then ran the router's LAN connection along that wire, and covered both with a large insulation sleeve. I then plugged in everything to the UPS, and routed all the wiring. I can now roll the desk almost anywhere in the room so that I can record, look out the window, get closer to or farther away from the door and more. I put a few boxes on the shelves as "drawers" and tidied that part up. Even my printer fits on a shelf. Laser-dog not included - some assembly required In the second post you can read about the bar-stool I purchased from Target for the desk. I cheaped-out on this one, and it proved to be a bad choice. Because I had to raise it so high, and was constantly sitting on it and then standing up, the gas-cylinder in it just gave out. So it became a very short stool that I ended up getting rid of. In the end, this one from Ikea proved to be a better choice: And so this arrangement is working out perfectly. I'm finding myself VERY productive this way. I hope these posts help you if you decide to try working at a stand-up desk. Although I was skeptical at first, I've found it to be a very healthy, easy way to code, design and especially present over a web-cam. It's natural to stand to speak when you're presenting, and it feels more energetic than sitting down to talk to others.

  Read the article

• WebCenter Content shared folders for clustering

  - by Kyle Hatlestad

  When configuring a WebCenter Content (WCC) cluster, one of the things which makes it unique from some other WebLogic Server applications is its requirement for a shared file system.  This is actually not any different then 10g and previous versions of UCM when it ran directly on a JVM.  And while it is simple enough to say it needs a shared file system, there are some crucial details in how those directories are configured. And if they aren't followed, you may result in some unwanted behavior. This blog post will go into the details on how exactly the file systems should be split and what options are required. Beyond documents being stored on the file system and/or database and metadata being stored in the database along with other structured data, there is other information being read and written to on the file system.  Information such as user profile preferences, workflow item state information, metadata profiles, and other details are stored in files.  In addition, for certain processes within WCC, each of the nodes needs to know what the other nodes are doing so they don’t step on each other.  WCC keeps track of this through the use of lock files on the file system.  Because of this, each node of the WCC must have access to the same file system just as they have access to the same database. WCC uses its own locking mechanism using files, so it also needs to have access to those files without file attribute caching and without locking being done by the client (node).  If one of the nodes accesses a certain status file and it happens to be cached, that node might attempt to run a process which another node is already working on.  Or if a particular file is locked by one of the node clients, this could interfere with access by another node.  Unfortunately, when disabling file attribute caching on the file share, this can impact performance.  So it is important to only disable caching and locking on the particular folders which require it.  When configuring WebCenter Content after deploying the domain, it asks for 3 different directories: Content Server Instance Folder, Native File Repository Location, and Weblayout Folder.  And starting in PS5, it now asks for the User Profile Folder. Even if you plan on storing the content in the database, you still need to establish a Native File (Vault) and Weblayout directories.  These will be used for handling temporary files, cached files, and files used to deliver the UI. For these directories, the only folder which needs to have the file attribute caching and locking disabled is the ‘Content Server Instance Folder’.  So when establishing this share through NFS or a clustered file system, be sure to specify those options. For instance, if creating the share through NFS, use the ‘noac’ and ‘nolock’ options for the mount options. For the other directories, caching and locking should be enabled to provide best performance to those locations.   These directory path configurations are contained within the <domain dir>\ucm\cs\bin\intradoc.cfg file: #Server System PropertiesIDC_Id=UCM_server1 #Server Directory Variables IdcHomeDir=/u01/fmw/Oracle_ECM1/ucm/idc/ FmwDomainConfigDir=/u01/fmw/user_projects/domains/base_domain/config/fmwconfig/ AppServerJavaHome=/u01/jdk/jdk1.6.0_22/jre/ AppServerJavaUse64Bit=true IntradocDir=/mnt/share_no_cache/base_domain/ucm/cs/ VaultDir=/mnt/share_with_cache/ucm/cs/vault/ WeblayoutDir=/mnt/share_with_cache/ucm/cs/weblayout/ #Server Classpath variables #Additional Variables #NOTE: UserProfilesDir is only available in PS5 – 11.1.1.6.0UserProfilesDir=/mnt/share_with_cache/ucm/cs/data/users/profiles/ In addition to these folder configurations, it’s also recommended to move node-specific folders to local disk to avoid unnecessary traffic to the shared directory.  So on each node, go to <domain dir>\ucm\cs\bin\intradoc.cfg and add these additional configuration entries: VaultTempDir=<domain dir>/ucm/<cs>/vault/~temp/ TraceDirectory=<domain dir>/servers/<UCM_serverN>/logs/EventDirectory=<domain dir>/servers/<UCM_serverN>/logs/event/ And of course, don’t forget the cluster-specific configuration values to add as well.  These can be added through Admin Server -> General Configuration -> Additional Configuration Variables or directly in the <IntradocDir>/config/config.cfg file: ArchiverDoLocks=true DisableSharedCacheChecking=true ServiceAllowRetry=true    (use only with Oracle RAC Database)PublishLockTimeout=300000  (time can vary depending on publishing time and number of nodes) For additional information and details on clustering configuration, I highly recommend reviewing document [1209496.1] on the support site.  In addition, there is a great step-by-step guide on setting up a WebCenter Content cluster [1359930.1].

  Read the article

• Master Data Management Implementation Styles

  - by david.butler(at)oracle.com

  In any Master Data Management solution deployment, one of the key decisions to be made is the choice of the MDM architecture. Gartner and other analysts describe some different Hub deployment styles, which must be supported by a best of breed MDM solution in order to guarantee the success of the deployment project.   Registry Style: In a Registry Style MDM Hub, the various source systems publish their data and a subscribing Hub stores only the source system IDs, the Foreign Keys (record IDs on source systems) and the key data values needed for matching. The Hub runs the cleansing and matching algorithms and assigns unique global identifiers to the matched records, but does not send any data back to the source systems. The Registry Style MDM Hub uses data federation capabilities to build the "virtual" golden view of the master entity from the connected systems.   Consolidation Style: The Consolidation Style MDM Hub has a physically instantiated, "golden" record stored in the central Hub. The authoring of the data remains distributed across the spoke systems and the master data can be updated based on events, but is not guaranteed to be up to date. The master data in this case is usually not used for transactions, but rather supports reporting; however, it can also be used for reference operationally.   Coexistence Style: The Coexistence Style MDM Hub involves master data that's authored and stored in numerous spoke systems, but includes a physically instantiated golden record in the central Hub and harmonized master data across the application portfolio. The golden record is constructed in the same manner as in the consolidation style, and, in the operational world, Consolidation Style MDM Hubs often evolve into the Coexistence Style. The key difference is that in this architectural style the master data stored in the central MDM system is selectively published out to the subscribing spoke systems.   Transaction Style: In this architecture, the Hub stores, enhances and maintains all the relevant (master) data attributes. It becomes the authoritative source of truth and publishes this valuable information back to the respective source systems. The Hub publishes and writes back the various data elements to the source systems after the linking, cleansing, matching and enriching algorithms have done their work. Upstream, transactional applications can read master data from the MDM Hub, and, potentially, all spoke systems subscribe to updates published from the central system in a form of harmonization. The Hub needs to support merging of master records. Security and visibility policies at the data attribute level need to be supported by the Transaction Style hub, as well.   Adaptive Transaction Style: This is similar to the Transaction Style, but additionally provides the capability to respond to diverse information and process requests across the enterprise. This style emerged most recently to address the limitations of the above approaches. With the Adaptive Transaction Style, the Hub is built as a platform for consolidating data from disparate third party and internal sources and for serving unified master entity views to operational applications, analytical systems or both. This approach delivers a real-time Hub that has a reliable, persistent foundation of master reference and relationship data, along with all the history and lineage of data changes needed for audit and compliance tracking. On top of this persistent master data foundation, the Hub can dynamically aggregate transaction data on demand from different source systems to deliver the unified golden view to downstream systems. Data can also be accessed through batch interfaces, published to a message bus or served through a real-time services layer. New data sources can be readily added in this approach by extending the data model and by configuring the new source mappings and the survivorship rules, meaning that all legacy data hubs can be leveraged to contribute their records/rules into the new transaction hub. Finally, through rich user interfaces for data stewardship, it allows exception handling by business analysts to keep it current with business rules/practices while maintaining the reliability of best-of-breed master records.   Confederation Style: In this architectural style, several Hubs are maintained at departmental and/or agency and/or territorial level, and each of them are connected to the other Hubs either directly or via a central Super-Hub. Each Domain level Hub can be implemented using any of the previously described styles, but normally the Central Super-Hub is a Registry Style one. This is particularly important for Public Sector organizations, where most of the time it is practically or legally impossible to store in a single central hub all the relevant constituent information from all departments.   Oracle MDM Solutions can be deployed according to any of the above MDM architectural styles, and have been specifically designed to fully support the Transaction and Adaptive Transaction styles. Oracle MDM Solutions provide strong data federation and integration capabilities which are key to enabling the use of the Confederated Hub as a possible architectural style approach. Don't lock yourself into a solution that cannot evolve with your needs. With Oracle's support for any type of deployment architecture, its ability to leverage the outstanding capabilities of the Oracle technology stack, and its open interfaces for non-Oracle technology stacks, Oracle MDM Solutions provide a low TCO and a quick ROI by enabling a phased implementation strategy.

  Read the article

• Integration Patterns with Azure Service Bus Relay, Part 2: Anonymous full-trust .NET consumer

  - by Elton Stoneman

  This is the second in the IPASBR series, see also: Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service Part 2 is nice and easy. From Part 1 we exposed our service over the Azure Service Bus Relay using the netTcpRelayBinding and verified we could set up our network to listen for relayed messages. Assuming we want to consume that service in .NET from an environment which is fairly unrestricted for us, but quite restricted for attackers, we can use netTcpRelay and shared secret authentication. Pattern applicability This is a good fit for scenarios where: the consumer can run .NET in full trust the environment does not restrict use of external DLLs the runtime environment is secure enough to keep shared secrets the service does not need to know who is consuming it the service does not need to know who the end-user is So for example, the consumer is an ASP.NET website sitting in a cloud VM or Azure worker role, where we can keep the shared secret in web.config and we don't need to flow any identity through to the on-premise service. The service doesn't care who the consumer or end-user is - say it's a reference data service that provides a list of vehicle manufacturers. Provided you can authenticate with ACS and have access to Service Bus endpoint, you can use the service and it doesn't care who you are. In this post, we’ll consume the service from Part 1 in ASP.NET using netTcpRelay. The code for Part 2 (+ Part 1) is on GitHub here: IPASBR Part 2 Authenticating and authorizing with ACS In this scenario the consumer is a server in a controlled environment, so we can use a shared secret to authenticate with ACS, assuming that there is governance around the environment and the codebase which will prevent the identity being compromised. From the provider's side, we will create a dedicated service identity for this consumer, so we can lock down their permissions. The provider controls the identity, so the consumer's rights can be revoked. We'll add a new service identity for the namespace in ACS , just as we did for the serviceProvider identity in Part 1. I've named the identity fullTrustConsumer. We then need to add a rule to map the incoming identity claim to an outgoing authorization claim that allows the identity to send messages to Service Bus (see Part 1 for a walkthrough creating Service Idenitities): Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: fullTrustConsumer Output claim type: net.windows.servicebus.action Output claim value: Send This sets up a service identity which can send messages into Service Bus, but cannot register itself as a listener, or manage the namespace. Adding a Service Reference The Part 2 sample client code is ready to go, but if you want to replicate the steps, you’re going to add a WSDL reference, add a reference to Microsoft.ServiceBus and sort out the ServiceModel config. In Part 1 we exposed metadata for our service, so we can browse to the WSDL locally at: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc?wsdl If you add a Service Reference to that in a new project you'll get a confused config section with a customBinding, and a set of unrecognized policy assertions in the namespace http://schemas.microsoft.com/netservices/2009/05/servicebus/connect. If you NuGet the ASB package (“windowsazure.servicebus”) first and add the service reference - you'll get the same messy config. Either way, the WSDL should have downloaded and you should have the proxy code generated. You can delete the customBinding entries and copy your config from the service's web.config (this is already done in the sample project in Sixeyed.Ipasbr.NetTcpClient), specifying details for the client:     <client>       <endpoint address="sb://sixeyed-ipasbr.servicebus.windows.net/net"                 behaviorConfiguration="SharedSecret"                 binding="netTcpRelayBinding"                 contract="FormatService.IFormatService" />     </client>     <behaviors>       <endpointBehaviors>         <behavior name="SharedSecret">           <transportClientEndpointBehavior credentialType="SharedSecret">             <clientCredentials>               <sharedSecret issuerName="fullTrustConsumer"                             issuerSecret="E3feJSMuyGGXksJi2g2bRY5/Bpd2ll5Eb+1FgQrXIqo="/>             </clientCredentials>           </transportClientEndpointBehavior>         </behavior>       </endpointBehaviors>     </behaviors>   The proxy is straight WCF territory, and the same client can run against Azure Service Bus through any relay binding, or directly to the local network service using any WCF binding - the contract is exactly the same. The code is simple, standard WCF stuff: using (var client = new FormatService.FormatServiceClient()) { outputString = client.ReverseString(inputString); } Running the sample First, update Solution Items\AzureConnectionDetails.xml with your service bus namespace, and your service identity credentials for the netTcpClient and the provider:   <!-- ACS credentials for the full trust consumer (Part2): -->   <netTcpClient identityName="fullTrustConsumer"                 symmetricKey="E3feJSMuyGGXksJi2g2bRY5/Bpd2ll5Eb+1FgQrXIqo="/> Then rebuild the solution and verify the unit tests work. If they’re green, your service is listening through Azure. Check out the client by navigating to http://localhost:53835/Sixeyed.Ipasbr.NetTcpClient. Enter a string and hit Go! - your string will be reversed by your on-premise service, routed through Azure: Using shared secret client credentials in this way means ACS is the identity provider for your service, and the claim which allows Send access to Service Bus is consumed by Service Bus. None of the authentication details make it through to your service, so your service is not aware who the consumer is (MSDN calls this "anonymous authentication").

  Read the article

• A Gentle Introduction to NuGet

  - by Joe Mayo

  Not too long ago, Microsoft released, NuGet, an automated package manager for Visual Studio.  NuGet makes it easy to download and install assemblies, and their references, into a Visual Studio project.  These assemblies, which I loosely refer to as packages, are often open source, and include projects such as LINQ to Twitter. In this post, I'll explain how to get started in using NuGet with your projects to include: installng NuGet, installing/uninstalling LINQ to Twitter via console command, and installing/uninstalling LINQ to Twitter via graphical reference menu. Installing NuGet The first step you'll need to take is to install NuGet.  Visit the NuGet site, at http://nuget.org/, click on the Install NuGet button, and download the NuGet.Tools.vsix installation file, shown below. Each browser is different (i.e. FireFox, Chrome, IE, etc), so you might see options to run right away, save to a location, or access to the file through the browser's download manager.  Regardless of how you receive the NuGet installer, execute the downloaded NuGet.Tools.vsix to install Nuget into visual Studio. The NuGet Footprint When you open visual Studio, observe that there is a new menu option on the Tools menu, titled Library Package Manager; This is where you use NuGet.  There are two menu options, from the Library Package Manager Menu that you can use: Package Manager Console and Package Manager Settings.  I won't discuss Package Manager Settings in this post, except to give you a general idea that, as one of a set of capabilities, it manages the path to the NuGet server, which is already set for you. Another menu, added by the NuGet installer, is Add Library Package Reference, found by opening the context menu for either a Solution Explorer project or a project's References folder or via the Project menu.  I'll discuss how to use this later in the post. The following discussion is concerned with the other menu option, Package Manager Console, which allows you to manage NuGet packages. Gettng a NuGet Package Selecting Tools -> Library Package Manager -> Package Manager Console opens the Package Manager Console.  As you can see, below, the Package Manager Console is text-based and you'll need to type in commands to work with packages. In this post, I'll explain how to use the Package Manager Console to install LINQ to Twitter, but there are many more commands, explained in the NuGet Package Manager Console Commands documentation.  To install LINQ to Twitter, open your current project where you want LINQ to Twitter installed, and type the following at the PM> prompt: Install-Package linqtotwitter If all works well, you'll receive a confirmation message, similar to the following, after a brief pause: Successfully installed 'linqtotwitter 2.0.20'. Successfully added 'linqtotwitter 2.0.20' to NuGetInstall. Also, observe that a reference to the LinqToTwitter.dll assembly was added to your current project. Uninstalling a NuGet Package I won't be so bold as to assume that you would only want to use LINQ to Twitter because there are other Twitter libraries available; I recommend Twitterizer if you don't care for LINQ to Twitter.  So, you might want to use the following command at the PM> prompt to remove LINQ to Twitter from your project: Uninstall-Package linqtotwitter After a brief pause, you'll see a confirmation message similar to the following: Successfully removed 'linqtotwitter 2.0.20' from NuGetInstall. Also, observe that the LinqToTwitter.dll assembly no longer appears in your project references list. Sometimes using the Package Manager Console is required for more sophisticated scenarios.  However, LINQ to Twitter doesn't have any dependencies and is a very simple install, so you can use another method of installing graphically, which I'll show you next. Graphical Installations As explained earlier, clicking Add Library Package Reference, from the context menu for either a Solution Explorer project or a project's References folder or via the Project menu opens the Add Library Package Reference window. This window will allow you to add a reference a NuGet package in your project. To the left of the window are a few accordian folders to help you find packages that are either on-line or already installed.  Just like the previous section, I'll assume you are installing LINQ to Twitter for the first time, so you would select the Online folder and click All.  After waiting for package descriptions to download, you'll notice that there are too many to scroll through in a short period of time, over 900 as I write this.  Therefore, use the search box located at the top right corner of the window and type LINQ to Twitter as I've done in the previous figure. You'll see LINQ to Twitter appear in the list. Click the Install button on the LINQ to Twitter entry. If the installation was successful, you'll see a message box display and disappear quickly (or maybe not if your machine is very fast or you blink at that moment). Then you'll see a reference to the LinqToTwitter.dll assembly in your project's references list. Note: While running this demo, I ran into an issue where VS had created a file lock on an installation folder without releasing it, causing an error with "packagename already exists. Skipping..." and then an error describing that it couldn't write to a destination folder.  I resolved the problem by closing and reopening VS. If you open the Add a Library Package Reference window again, you'll see LINQ to Twitter listed in the Recent packages folder. Summary You can install NuGet via the on-line home page with a click of a button.  Nuget provides two ways to work with packages, via console or graphical window.  While the graphical window is easiest, the console window is more powerful. You can now quickly add project references to many available packages via the NuGet service. Joe

  Read the article

• How to Save Hundreds or Thousands of Dollars on Cell Phone Service

  - by Chris Hoffman

  Cell phone contracts are bad. You get a seemingly cheap phone up front, but you more than pay for the cost of the phone over two years. Prepaid phone plans are surging in North America for a reason. Prepaid phone plans will be cheaper and more flexible than traditional contracts with big carriers for many people. However much you use your phone, there’s a good chance you can save money with a prepaid service. No More Contracts Here’s how cell phone service typically works in North America: You get a subsidized phone for “free”, $99, or $199. You sign up for a two-year contract and more than pay back the cost of that phone over the length of the contract. This is similar to leasing something or purchasing it on a credit card and paying it back over two years — you spend less up front, but you’re paying more in the long run. But this isn’t the only option. You could opt for a cheaper prepaid service that doesn’t lock you into a contract. If you don’t use your phone much, you could just pay for what you use and avoid the hefty cell phone bills. If you use your phone a lot, you could get a cheaper plan, too. Now, this certainly isn’t for everyone. If you want the latest iPhone or Galaxy smartphone every two years and require a 4G data connection, prepaid services may not be for you. On the other hand, if you don’t need the latest phone, you can save money here. You can also save a huge amount of money if you don’t use your phone much. Phone Options When you choose your prepaid or contract-free service, you’ll often be able to purchase a phone from them. You’ll generally be able to find dirt-cheap dumbphones and the cheapest, slowest Android phones for not very much money. If you are able to buy a top-of-the-line smartphone, you’ll have to pay the full, unsubsidized price. That’s $649 for either an iPhone 5S or Samsung Galaxy S4. Whatever phones the service provider offers, you could always buy a phone elsewhere — for example, you could buy an unsubsidized iPhone direct from Apple and then take it to your cell phone service of choice. Most services will allow you to get a SIM card and pop it into your existing phone rather than purchasing a phone. If you can get a hand-me-down smartphone, you can often save quite a bit of money. For example, you may have a family member upgrading from an iPhone 4S to an iPhone 5S. You could take their phone to a prepaid carrier and have a nicer phone on a cheap cell phone plan. If you brought an old smartphone to a big carrier like AT&T or Verizon, they wouldn’t give you a discount on your monthly plan. You’d have to pay the same amount of money every month as if you had gotten a subsidized phone. Google’s Nexus phones are also great options for people looking to buy smartphones and pay up-front. Google’s Nexus 4 offered a modern, almost top-of-the-line Android smartphone experience at $299 or $349 when it came out last year. Google will soon be releasing the Nexus 5 and it’s expected to be priced at $349. That’s certainly a lot more than a cheap phone, but it’s a fairly high-end smartphone at almost half the price of an iPhone 5S or Galaxy S4. Nexus phones can be purchased online from Google’s Play Store. Service Options When choosing a service, you need to consider what you actually use. If you’re someone who only uses your phone rarely, you can get plans that will allow you to pay as little as a few dollars per month. If you’re someone who’s usually in range of Wi-Fi, you may not need much data at all. If you want a plan with unlimited talk, texting, and data usage, you can get it for much cheaper than you’d pay on a major carrier like AT&T. The options here range from pay-as-you-go plans, like the ones offered by T-Mobile, which allow you to put a certain amount of money in and only drain that balance when you actually use minutes, texts, or data. If you only make a few calls and send a few texts per month, you’d only pay a few bucks. On the other end, Walmart’s Straight Talk service is a popular option that offers unlimited talk, texting, and data at $45 per month. Which service is right for you depends on a lot of things, including your usage and what each network’s coverage is like in your area. You’ll want to do some research of your own before choosing a service. Prepaid services also offer you even more flexibility after you choose one. If you’re not happy or a better deal comes along, you can switch — you’re not locked into your service for two years and you won’t pay an early termination fee. Image Credit: Intel Free Press on Flickr, Jon Fingas on Flickr, John Karakatsanis on Flickr, kendalkinggroup on Flickr     

  Read the article

• Declarative Architectures in Infrastructure as a Service (IaaS)

  - by BuckWoody

  I deal with computing architectures by first laying out requirements, and then laying in any constraints for it's success. Only then do I bring in computing elements to apply to the system. As an example, a requirement might be "world-side availability" and a constraint might be "with less than 80ms response time and full HA" or something similar. Then I can choose from the best fit of technologies which range from full-up on-premises computing to IaaS, PaaS or SaaS. I also deal in abstraction layers - on-premises systems are fully under your control, in IaaS the hardware is abstracted (but not the OS, scale, runtimes and so on), in PaaS the hardware and the OS is abstracted and you focus on code and data only, and in SaaS everything is abstracted - you merely purchase the function you want (like an e-mail server or some such) and simply use it. When you think about solutions this way, the architecture moves to the primary factor in your decision. It's problem-first architecting, and then laying in whatever technology or vendor best fixes the problem. To that end, most architects design a solution using a graphical tool (I use Visio) and then creating documents that  let the rest of the team (and business) know what is required. It's the template, or recipe, for the solution. This is extremely easy to do for SaaS - you merely point out what the needs are, research the vendor and present the findings (and bill) to the business. IT might not even be involved there. In PaaS it's not much more complicated - you use the same Application Lifecycle Management and design tools you always have for code, such as Visual Studio or some other process and toolset, and you can "stamp out" the application in multiple locations, update it and so on. IaaS is another story. Here you have multiple machines, operating systems, patches, virus scanning, run-times, scale-patterns and tools and much more that you have to deal with, since essentially it's just an in-house system being hosted by someone else. You can certainly automate builds of servers - we do this as technical professionals every day. From Windows to Linux, it's simple enough to create a "build script" that makes a system just like the one we made yesterday. What is more problematic is being able to tie those systems together in a coherent way (as a solution) and then stamp that out repeatedly, especially when you might want to deploy that solution on-premises, or in one cloud vendor or another. Lately I've been working with a company called RightScale that does exactly this. I'll point you to their site for more info, but the general idea is that you document out your intent for a set of servers, and it will deploy them to on-premises clouds, Windows Azure, and other cloud providers all from the same script. In other words, it doesn't contain the images or anything like that - it contains the scripts to build them on-premises or on a cloud vendor like Microsoft. Using a tool like this, you combine the steps of designing a system (all the way down to passwords and accounts if you wish) and then the document drives the distribution and implementation of that intent. As time goes on and more and more companies implement solutions on various providers (perhaps for HA and DR) then this becomes a compelling investigation. The RightScale information is here, if you want to investigate it further. Yes, there are other methods I've found, but most are tied to a single kind of cloud, and I'm not into vendor lock-in. Poppa Bear Level - Hands-on EvaluateRightScale at no cost.  Just bring your Windows Azurecredentials and follow the these tutorials: Sign Up for Windows Azure Add     Windows Azure to a RightScale Account Windows Azure Virtual Machines     3-tier Deployment Momma Bear Level - Just the Right level... ;0)  WindowsAzure Evaluation Guide - if you are new toWindows Azure Virtual Machines and new to RightScale, we recommend that youread the entire evaluation guide to gain a more complete understanding of theWindows Azure + RightScale solution.    WindowsAzure Support Page @ support.rightscale.com - FAQ's, tutorials,etc. for  Windows Azure Virtual Machines (Work in Progress) Baby Bear Level - Marketing WindowsAzure Page @ www.rightscale.com - find overview informationincluding solution briefs and presentation & demonstration videos   Scale     and Automate Applications on Windows Azure  Solution Brief     - how RightScale makes Windows Azure Virtual Machine even better SQL     Server on Windows Azure  Solution Brief   -       Run Highly Available SQL Server on Windows Azure Virtual Machines

  Read the article

• Financial Management: Why Move to the Cloud?

  - by Kathryn Perry

  A guest post by Terrance Wampler, Vice President, Financials Product Strategy, Oracle I’ve spent my career designing and developing financial management systems, most of it at Oracle. Every single day I either meet with our customers or talk to them on the phone. The time is usually spent discussing various business challenges facing CFOs and Controllers, who are running Oracle’s Financials. Lately, we’ve been talking a lot about cloud computing and whether it makes sense for finance to go to the cloud. Here are some pros and cons that might help you make that decision. Let’s start with the benefits of cloud solutions. The first is savings. With cloud services, you pay only for those commodities that you use. That makes you feel like you're getting better value for your money. Plus, you can preserve your cash for your core business and you can get a better matching of expenses and revenues. So, at the top of the list is lower total cost of ownership. The second point has to do with optimization. With cloud services, you’ll need less IT infrastructure so you can optimize your IT resources for better-value, higher-end projects. This also leads to greater financial visibility, where there's a clear cost for the set of services or features replaced by cloud services. And, the last benefit is what I call acceleration. You can save money by speeding up the initialization and deployment of the project. You don't have to deal with IT infrastructure and you can start implementing right away. We did a quick survey of about 70 CFOs at the CFO Summit last month in New York City. We asked them why they were looking at cloud services, and not necessarily just for financials. The No. 1 response was perceived lower cost of ownership. But of course there are risks to consider. The first thing most people think about in the cloud is security and ownership of data. So, will your data really be safe? Can you meet your own privacy policy requirements? Do you really want your private financial data exposed? Do you trust the provider? Is what you see really your data? Do you own it or is it managed by someone else? Security is a big concern that comes with an emotional component. The next thing in the risk category is reliability. Is the provider proven? You’re taking what you have control over – for example, standards and policies and internal service level agreements – away from your IT department and giving it to someone else. Will you still be able to adapt to shifts in your business? Will the provider be able to grow with your business effectively? Reliability means having a provider that can give you the service infrastructure that you need. And then there’s performance, which has two components in terms of risk. Going forward, will the provider be able to scale the infrastructure or service level if you have new employees or new businesses? And second, will the price you negotiate and the rate you lock in cover additional costs and rising service fees? Another piece is cost. What happens if you don't get the service level you want? What if you end the service? What happens, if after a few years, you send the service out for bid and change service? Can you move your data? Can you move the applications? Do the integrations work? These are cost components people don’t always take into account. And, the final piece is the business case. The perception is that you can get started really quickly with cloud. It has a perceived lower cost of total ownership and it feels cool because it's cloud. But do you have a good business case for moving to the cloud? Your total cost of ownership is over three years; then you’ll renew it, so your TCO is six years. Have you compared that to other internal services that you’re offering? You might already have product that you can run this new business or division on. In that same survey at the CFO Summit, the execs thought the biggest perceived risks were security of data, ability to move data back, and the ability to create a business case to actually justify the risks. So that’s the list of pros and cons. Not to leave you hanging, I will do another post on how to balance these pros and cons and make the right decision for your business.

  Read the article

• Polite busy-waiting with WRPAUSE on SPARC

  - by Dave

  Unbounded busy-waiting is an poor idea for user-space code, so we typically use spin-then-block strategies when, say, waiting for a lock to be released or some other event. If we're going to spin, even briefly, then we'd prefer to do so in a manner that minimizes performance degradation for other sibling logical processors ("strands") that share compute resources. We want to spin politely and refrain from impeding the progress and performance of other threads — ostensibly doing useful work and making progress — that run on the same core. On a SPARC T4, for instance, 8 strands will share a core, and that core has its own L1 cache and 2 pipelines. On x86 we have the PAUSE instruction, which, naively, can be thought of as a hardware "yield" operator which temporarily surrenders compute resources to threads on sibling strands. Of course this helps avoid intra-core performance interference. On the SPARC T2 our preferred busy-waiting idiom was "RD %CCR,%G0" which is a high-latency no-nop. The T4 provides a dedicated and extremely useful WRPAUSE instruction. The processor architecture manuals are the authoritative source, but briefly, WRPAUSE writes a cycle count into the the PAUSE register, which is ASR27. Barring interrupts, the processor then delays for the requested period. There's no need for the operating system to save the PAUSE register over context switches as it always resets to 0 on traps. Digressing briefly, if you use unbounded spinning then ultimately the kernel will preempt and deschedule your thread if there are other ready threads than are starving. But by using a spin-then-block strategy we can allow other ready threads to run without resorting to involuntary time-slicing, which operates on a long-ish time scale. Generally, that makes your application more responsive. In addition, by blocking voluntarily we give the operating system far more latitude regarding power management. Finally, I should note that while we have OS-level facilities like sched_yield() at our disposal, yielding almost never does what you'd want or naively expect. Returning to WRPAUSE, it's natural to ask how well it works. To help answer that question I wrote a very simple C/pthreads benchmark that launches 8 concurrent threads and binds those threads to processors 0..7. The processors are numbered geographically on the T4, so those threads will all be running on just one core. Unlike the SPARC T2, where logical CPUs 0,1,2 and 3 were assigned to the first pipeline, and CPUs 4,5,6 and 7 were assigned to the 2nd, there's no fixed mapping between CPUs and pipelines in the T4. And in some circumstances when the other 7 logical processors are idling quietly, it's possible for the remaining logical processor to leverage both pipelines. Some number T of the threads will iterate in a tight loop advancing a simple Marsaglia xor-shift pseudo-random number generator. T is a command-line argument. The main thread loops, reporting the aggregate number of PRNG steps performed collectively by those T threads in the last 10 second measurement interval. The other threads (there are 8-T of these) run in a loop busy-waiting concurrently with the T threads. We vary T between 1 and 8 threads, and report on various busy-waiting idioms. The values in the table are the aggregate number of PRNG steps completed by the set of T threads. The unit is millions of iterations per 10 seconds. For the "PRNG step" busy-waiting mode, the busy-waiting threads execute exactly the same code as the T worker threads. We can easily compute the average rate of progress for individual worker threads by dividing the aggregate score by the number of worker threads T. I should note that the PRNG steps are extremely cycle-heavy and access almost no memory, so arguably this microbenchmark is not as representative of "normal" code as it could be. And for the purposes of comparison I included a row in the table that reflects a waiting policy where the waiting threads call poll(NULL,0,1000) and block in the kernel. Obviously this isn't busy-waiting, but the data is interesting for reference. _table { border:2px black dotted; margin: auto; width: auto; } _tr { border: 2px red dashed; } _td { border: 1px green solid; } _table { border:2px black dotted; margin: auto; width: auto; } _tr { border: 2px red dashed; } td { background-color : #E0E0E0 ; text-align : right ; } th { text-align : left ; } td { background-color : #E0E0E0 ; text-align : right ; } th { text-align : left ; } Aggregate progress T = #worker threads Wait Mechanism for 8-T threadsT=1T=2T=3T=4T=5T=6T=7T=8 Park thread in poll() 32653347334833483348334833483348 no-op 415 831 124316482060249729303349 RD %ccr,%g0 "pause" 14262429269228623013316232553349 PRNG step 412 829 124616702092251029303348 WRPause(8000) 32443361333133483349334833483348 WRPause(4000) 32153308331533223347334833473348 WRPause(1000) 30853199322432513310334833483348 WRPause(500) 29173070315032223270330933483348 WRPause(250) 26942864294930773205338833483348 WRPause(100) 21552469262227902911321433303348

  Read the article

• Using Transaction Logging to Recover Post-Archived Essbase data

  - by Keith Rosenthal

  Data recovery is typically performed by restoring data from an archive.  Data added or removed since the last archive took place can also be recovered by enabling transaction logging in Essbase.  Transaction logging works by writing transactions to a log store.  The information in the log store can then be recovered by replaying the log store entries in sequence since the last archive took place.  The following information is recorded within a transaction log entry: Sequence ID Username Start Time End Time Request Type A request type can be one of the following categories: Calculations, including the default calculation as well as both server and client side calculations Data loads, including data imports as well as data loaded using a load rule Data clears as well as outline resets Locking and sending data from SmartView and the Spreadsheet Add-In.  Changes from Planning web forms are also tracked since a lock and send operation occurs during this process. You can use the Display Transactions command in the EAS console or the query database MAXL command to view the transaction log entries. Enabling Transaction Logging Transaction logging can be enabled at the Essbase server, application or database level by adding the TRANSACTIONLOGLOCATION essbase.cfg setting.  The following is the TRANSACTIONLOGLOCATION syntax: TRANSACTIONLOGLOCATION [appname [dbname]] LOGLOCATION NATIVE ENABLE | DISABLE Note that you can have multiple TRANSACTIONLOGLOCATION entries in the essbase.cfg file.  For example: TRANSACTIONLOGLOCATION Hyperion/trlog NATIVE ENABLE TRANSACTIONLOGLOCATION Sample Hyperion/trlog NATIVE DISABLE The first statement will enable transaction logging for all Essbase applications, and the second statement will disable transaction logging for the Sample application.  As a result, transaction logging will be enabled for all applications except the Sample application. A location on a physical disk other than the disk where ARBORPATH or the disk files reside is recommended to optimize overall Essbase performance. Configuring Transaction Log Replay Although transaction log entries are stored based on the LOGLOCATION parameter of the TRANSACTIONLOGLOCATION essbase.cfg setting, copies of data load and rules files are stored in the ARBORPATH/app/appname/dbname/Replay directory to optimize the performance of replaying logged transactions.  The default is to archive client data loads, but this configuration setting can be used to archive server data loads (including SQL server data loads) or both client and server data loads. To change the type of data to be archived, add the TRANSACTIONLOGDATALOADARCHIVE configuration setting to the essbase.cfg file.  Note that you can have multiple TRANSACTIONLOGDATALOADARCHIVE entries in the essbase.cfg file to adjust settings for individual applications and databases. Replaying the Transaction Log and Transaction Log Security Considerations To replay the transactions, use either the Replay Transactions command in the EAS console or the alter database MAXL command using the replay transactions grammar.  Transactions can be replayed either after a specified log time or using a range of transaction sequence IDs. The default when replaying transactions is to use the security settings of the user who originally performed the transaction.  However, if that user no longer exists or that user's username was changed, the replay operation will fail. Instead of using the default security setting, add the REPLAYSECURITYOPTION essbase.cfg setting to use the security settings of the administrator who performs the replay operation.  REPLAYSECURITYOPTION 2 will explicitly use the security settings of the administrator performing the replay operation.  REPLAYSECURITYOPTION 3 will use the administrator security settings if the original user’s security settings cannot be used. Removing Transaction Logs and Archived Replay Data Load and Rules Files Transaction logs and archived replay data load and rules files are not automatically removed and are only removed manually.  Since these files can consume a considerable amount of space, the files should be removed on a periodic basis. The transaction logs should be removed one database at a time instead of all databases simultaneously.  The data load and rules files associated with the replayed transactions should be removed in chronological order from earliest to latest.  In addition, do not remove any data load and rules files with a timestamp later than the timestamp of the most recent archive file. Partitioned Database Considerations For partitioned databases, partition commands such as synchronization commands cannot be replayed.  When recovering data, the partition changes must be replayed manually and logged transactions must be replayed in the correct chronological order. If the partitioned database includes any @XREF commands in the calc script, the logged transactions must be selectively replayed in the correct chronological order between the source and target databases. References For additional information, please see the Oracle EPM System Backup and Recovery Guide.  For EPM 11.1.2.2, the link is http://docs.oracle.com/cd/E17236_01/epm.1112/epm_backup_recovery_1112200.pdf

  Read the article

• Swap partition not recognized (The disk drive with UUID=... is not ready yet or not present)

  - by ladaghini

  I think I had an encrypted swap partition, because I chose to encrypt my home directory during the installation. I believe that's what the line with /dev/mapper/cryptswap1 ... in my /etc/fstab is all about. I did something to bork my swap because on the next boot, I got a message (paraphrased): The disk drive for /dev/mapper/cryptswap1 is not ready yet or not present. Wait to continue. Press S to skip or M to manually recover. (As a side note, pressing S or M seemed to do nothing different from just waiting.) Here's what I've tried: This tutorial on how to fix the swap partition not mounting. However, in the above, the mkswap command fails because the device is busy. So I booted from a live USB, ran GParted to reformat the swap partition (which showed up as an unknown fs type), and chrooted into the broken system to try that tutorial again. I also adjusted /etc/initramfs-tools/conf.d/resume and /etc/fstab to reflect the new UUID generated from formatting the partition as a swap. That still didn't work; instead of /dev/mapper/cryptswap1 not present, "The disk drive with UUID=[swap partition's UUID] is not ready yet or not present..." So I decided to start afresh as though I never had created a swap partition in the first place. From the Live USB, I deleted the swap partition altogether (which, again showed up in GParted as an unknown fs type), removed the swap and cryptswap entries in /etc/fstab as well as removed /etc/initramfs-tools/conf.d/resume and /etc/crypttab. At this point the main system shouldn't be considered broken because there is no swap partition and no instructions to mount one, right? I didn't get any errors during startup. I followed the same instructions to create and encrypt the swap partition, starting with creating a partition for the swap, though I think fdisk said a reboot was necessary to see changes. I was confident the 3rd process above would work, but the problem yet persists. Some relevant info (/dev/sda8 is the swap partition): /etc/fstab file: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=4c11e82c-5fe9-49d5-92d9-cdaa6865c991 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda5 during installation UUID=4031413e-e89f-49a9-b54c-e887286bb15e /boot ext4 defaults 0 2 # /home was on /dev/sda7 during installation UUID=d5bbfc6f-482a-464e-9f26-fd213230ae84 /home ext4 defaults 0 2 # swap was on /dev/sda8 during installation UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 output of sudo mount: /dev/sda6 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda5 on /boot type ext4 (rw) /dev/sda7 on /home type ext4 (rw) /home/undisclosed/.Private on /home/undisclosed type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=cbae1771abd34009,ecryptfs_fnek_sig=7cefe2f59aab8e58) gvfs-fuse-daemon on /home/undisclosed/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=undisclosed) output of sudo blkid (note that /dev/sda8 is missing): /dev/sda1: LABEL="SYSTEM" UUID="960490E80490CC9D" TYPE="ntfs" /dev/sda2: UUID="D4043140043126C0" TYPE="ntfs" /dev/sda3: LABEL="Shared" UUID="80F613E1F613D5EE" TYPE="ntfs" /dev/sda5: UUID="4031413e-e89f-49a9-b54c-e887286bb15e" TYPE="ext4" /dev/sda6: UUID="4c11e82c-5fe9-49d5-92d9-cdaa6865c991" TYPE="ext4" /dev/sda7: UUID="d5bbfc6f-482a-464e-9f26-fd213230ae84" TYPE="ext4" /dev/mapper/cryptswap1: UUID="41fa147a-3e2c-4e61-b29b-3f240fffbba0" TYPE="swap" output of sudo fdisk -l: Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xdec3fed2 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 210135039 104862720 7 HPFS/NTFS/exFAT /dev/sda3 210135040 415422463 102643712 7 HPFS/NTFS/exFAT /dev/sda4 415424510 625141759 104858625 5 Extended /dev/sda5 415424512 415922175 248832 83 Linux /dev/sda6 415924224 515921919 49998848 83 Linux /dev/sda7 515923968 621389823 52732928 83 Linux /dev/sda8 621391872 625141759 1874944 82 Linux swap / Solaris Disk /dev/mapper/cryptswap1: 1919 MB, 1919942656 bytes 255 heads, 63 sectors/track, 233 cylinders, total 3749888 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xaf5321b5 /etc/initramfs-tools/conf.d/resume file: RESUME=UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 /etc/crypttab file: cryptswap1 /dev/sda8 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 output of sudo swapon -as: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 1874940 0 -1 output of sudo free -m: total used free shared buffers cached Mem: 1476 1296 179 0 35 671 -/+ buffers/cache: 590 886 Swap: 1830 0 1830 So, how can this be fixed?

  Read the article

• Educause Top-Ten IT Issues - the most change in a decade or more

  - by user739873

  The Education IT Issue Panel has released the 2012 top-ten issues facing higher education IT leadership, and instead of the customary reshuffling of the same deck, the issues reflect much of the tumult and dynamism facing higher education generally.  I find it interesting (and encouraging) that at the top of this year's list is "Updating IT Professionals' Skills and Roles to Accommodate Emerging Technologies and Changing IT Management and Service Delivery Models."  This reflects, in my view, the realization that higher education IT must change in order to fully realize the potential for transforming the institution, and therefore it's people must learn new skills, understand and accept new ways of solving problems, and not be tied down by past practices or institutional inertia. What follows in the remaining 9 top issues all speak, in some form or fashion, to the need for dramatic change, but not just in the areas of "funding IT" (code for cost containment or reduction), but rather the need to increase effectiveness and efficiency of the institution through the use of technology—leveraging the wave of BYOD (Bring Your Own Device) to the institution's advantage, rather than viewing it as a threat and a problem to be contained. Although it's #10 of 10, IT Governance (and establishment and implementation of the governance model throughout the institution) is key to effectively acting upon many of the preceding issues in this year's list.  In the majority of cases, technology exists to meet the needs and requirements to effectively address many of the challenges outlined in top-ten issues list. Which brings me to my next point. Although I try not to sound too much like an Oracle commercial in these (all too infrequent) blog posts, I can't help but point out how much confluence there is between several of the top issues this year and what my colleagues and I have been evangelizing for some time. Starting from the bottom of the list up: 1) I'm gratified that research and the IT challenges it presents has made the cut.  Big Data (or Large Data as it's phased in the report) is rapidly going to overwhelm much of what exists today even at our most prepared and well-equipped research universities.  Combine large data with the significantly more stringent requirements around data preservation, archiving, sharing, curation, etc. coming from granting agencies like NSF, and you have the brewing storm that could result in a lot of "one-off" solutions to a problem that could very well be addressed collectively and "at scale."   2) Transformative effects of IT – while I see more and more examples of this, there is still much more that can be achieved. My experience tells me that culture (as the report indicates or at least poses the question) gets in the way more than technology not being up to task.  We spend too much time on "context" and not "core," and get lost in the weeds on the journey to truly transforming the institution with technology. 3) Analytics as a key element in improving various institutional outcomes.  In our work around Student Success, we see predictive "academic" analytics as essential to getting in front of the Student Success issue, regardless of how an institution or collections of institutions defines success.  Analytics must be part of the fabric of the key academic enterprise applications, not a bolt-on.  We will spend a significant amount of time on this topic during our semi-annual Education Industry Strategy Council meeting in Washington, D.C. later this month. 4) Cloud strategy for the broad range of applications in the academic enterprise.  Some of the recent work by Casey Green at the Campus Computing Survey would seem to indicate that there is movement in this area but mostly in what has been termed "below the campus" application areas such as collaboration tools, recruiting, and alumni relations.  It's time to get serious about sourcing elements of mature applications like student information systems, HR, Finance, etc. leveraging a model other than traditional on-campus custom. I've only selected a few areas of the list to highlight, but the unifying theme here (and this is where I run the risk of sounding like an Oracle commercial) is that these lofty goals cry out for partners that can bring economies of scale to bear on the problems married with a deep understanding of the nuances unique to higher education.  In a recent piece in Educause Review on Student Information Systems, the author points out that "best of breed is back". Unfortunately I am compelled to point out that best of breed is a large part of the reason we have made as little progress as we have as an industry in advancing some of the causes outlined above.  Don't confuse "integrated" and "full stack" for vendor lock-in.  The best-of-breed market forces that Ron points to ensure that solutions have to be "integratable" or they don't survive in the marketplace. However, by leveraging the efficiencies afforded by adopting solutions that are pre-integrated (and possibly metered out as a service) allows us to shed unnecessary costs – as difficult as these decisions are to make and to drive throughout the organization. Cole

  Read the article

• What Can We Learn About Software Security by Going to the Gym

  - by Nick Harrison

  There was a recent rash of car break-ins at the gym. Not an epidemic by any stretch, probably 4 or 5, but still... My gym used to allow you to hang your keys from a peg board at the front desk. This way you could come to the gym dressed to work out, lock your valuables in your car, and not have anything to worry about. Ignorance is bliss. The problem was that anyone who wanted to could go pick up your car keys, click the unlock button and find your car. Once there, they could rummage through your stuff and then walk back in and finish their workout as if nothing had happened. The people doing this were a little smatter then the average thief and would swipe some but not all of your cash leaving everything else in place. Most thieves would steal the whole car and be busted more quickly. The victims were unaware that anything had happened for several days. Fortunately, once the victims realized what had happened, the gym was still able to pull security tapes and find out who was misbehaving. All of the bad guys were busted, and everyone can now breathe a sigh of relieve. It is once again safe to go to the gym. Except there was still a fundamental problem. Putting your keys on a peg board by the front door is just asking for bad things to happen. One person got busted exploiting this security flaw. Others can still be exploiting it. In fact, others may well have been exploiting it and simply never got caught. How long would it take you to realize that $10 was missing from your wallet, if everything else was there? How would you even know when it went missing? Would you go to the front desk and even bother to ask them to review security tapes if you were only missing a small amount. Once highlighted, it is easy to see how commonly such vulnerability may have been exploited. So the gym did the very reasonable precaution of removing the peg board. To me the most shocking part of this story is the resulting uproar from gym members losing the convenient key peg. How dare they remove the trusted peg board? How can I work out now, I have to carry my keys from machine to machine? How can I enjoy my workout with this added inconvenience? This all happened a couple of weeks ago, and some people are still complaining. In light of the recent high profile hacking, there are a couple of parallels that can be drawn. Many web sites are riddled with vulnerabilities are crazy and easily exploitable as leaving your car keys by the front door while you work out. No one ever considered thanking the people who were swiping these keys for pointing out the vulnerability. Without a hesitation, they had their gym memberships revoked and are awaiting prosecution. The gym did recognize the vulnerability for what it is, and closed up that attack vector. What can we learn from this? Monitoring and logging will not prevent a crime but they will allow us to identify that a crime took place and may help track down who did it. Once we find a security weakness, we need to eliminate it. We may never identify and eliminate all security weaknesses, but we cannot allow well known vulnerabilities to persist in our system. In our case, we are not likely to meet resistance from end users. We are more likely to meet resistance from stake holders, product owners, keeper of schedules and budgets. We may meet resistance from integration partners, co workers, and third party vendors. Regardless of the source, we will see resistance, but the weakness needs to be dealt with. There is no need to glorify a cracker for bringing to light a security weakness. Regardless of their claimed motives, they are not heroes. There is also no point in wasting time defending weaknesses once they are identified. Deal with the weakness and move on. In may be embarrassing to find security weaknesses in our systems, but it is even more embarrassing to continue ignoring them. Even if it is unpopular, we need to seek out security weaknesses and eliminate them when we find them. http://www.sans.org has put together the Common Weakness Enumeration http://cwe.mitre.org/ which lists out common weaknesses. The site navigation takes a little getting used to, but there is a treasure trove here. Here is the detail page for SQL Injection. It clearly states how this can be exploited, in case anyone doubts that the weakness should be taken seriously, and more importantly how to mitigate the risk.

  Read the article

• YouTube Scalability Lessons

  - by Bertrand Matthelié

  @font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Calibri"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }h2 { margin: 12pt 0cm 3pt; page-break-after: avoid; font-size: 14pt; font-family: "Times New Roman"; font-style: italic; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }span.Heading2Char { font-family: Calibri; font-weight: bold; font-style: italic; }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } Very interesting blog post by Todd Hoff at highscalability.com presenting “7 Years of YouTube Scalability Lessons in 30 min” based on a presentation from Mike Solomon, one of the original engineers at YouTube: …. The key takeaway away of the talk for me was doing a lot with really simple tools. While many teams are moving on to more complex ecosystems, YouTube really does keep it simple. They program primarily in Python, use MySQL as their database, they’ve stuck with Apache, and even new features for such a massive site start as a very simple Python program. That doesn’t mean YouTube doesn’t do cool stuff, they do, but what makes everything work together is more a philosophy or a way of doing things than technological hocus pocus. What made YouTube into one of the world’s largest websites? Read on and see... Stats @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } 4 billion Views a day 60 hours of video is uploaded every minute 350+ million devices are YouTube enabled Revenue double in 2010 The number of videos has gone up 9 orders of magnitude and the number of developers has only gone up two orders of magnitude. 1 million lines of Python code Stack @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } Python - most of the lines of code for YouTube are still in Python. Everytime you watch a YouTube video you are executing a bunch of Python code. Apache - when you think you need to get rid of it, you don’t. Apache is a real rockstar technology at YouTube because they keep it simple. Every request goes through Apache. Linux - the benefit of Linux is there’s always a way to get in and see how your system is behaving. No matter how bad your app is behaving, you can take a look at it with Linux tools like strace and tcpdump. MySQL - is used a lot. When you watch a video you are getting data from MySQL. Sometime it’s used a relational database or a blob store. It’s about tuning and making choices about how you organize your data. Vitess- a  new project released by YouTube, written in Go, it’s a frontend to MySQL. It does a lot of optimization on the fly, it rewrites queries and acts as a proxy. Currently it serves every YouTube database request. It’s RPC based. Zookeeper - a distributed lock server. It’s used for configuration. Really interesting piece of technology. Hard to use correctly so read the manual Wiseguy - a CGI servlet container. Spitfire - a templating system. It has an abstract syntax tree that let’s them do transformations to make things go faster. Serialization formats - no matter which one you use, they are all expensive. Measure. Don’t use pickle. Not a good choice. Found protocol buffers slow. They wrote their own BSON implementation, which is 10-15 time faster than the one you can download. ...Contiues. Read the blog Watch the video

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >