Search Results

Search found 19332 results on 774 pages for 'hard drive'.

Page 113/774 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

  • SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

    - by V M
    After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching I decided to go with this controller from amazon. My Samsung magician benchmark before upgrade (running SATA 2): Now after installing the controller all of the benchmark scores are lower (even though the Samsung Magician app confirms its connected to a SATA 3 port): What can I do to remedy this? Any help is appreciated.

    Read the article

  • HDD from Mid-2009 MacBook Pro works OUTSIDE laptop, but not INSIDE.

    - by Jaime
    Leading up to the problem: I was working late one night on a Keynote presentation. My battery ran out, and the computer did that hibernation thing it does when there's no battery power. I got my charger, connected it to my computer, and then pushed the power button. It started up for a second in to the gray screen it usually goes to. Then I turned around, tugging the magsafe charger out of the connector on the computer. This caused my computer to shut down again. Now I can't get it to boot at all -- just a blinking folder icon with a question mark in it on boot up. I've tried pretty much everything to deal with this. Multiple forced reboots, resetting PRAM and NVRAM, etc. I booted to original OSX disc and ran disc utility, but I discovered that there is no disc to boot to. I ran the Apple Hardware Test, and it came back 100% good. I booted to an Ubuntu live-boot disc and ran that disc utility, just to see if it recognized a disc at all. It didn't. So I removed the HDD, and replaced it with a bootable volume running BSD. It didn't recognize that HDD either. I then attached my HDD to my computer via an external enclosure with a USB interface. Lo and behold, it booted! So my computer now only work with my HDD attached externally. This means that the HDD is functional. And the AHT returns no hardware malfunctions. So what the hell is going on? … In the meantime: I've put the HDD back into the computer but it still doesn't do anything at all (I'm running it externally right now). I just checked the serial number and my 1 year warranty expired recently, so I can't send it back for repair. … Little Help Thoughts? I've been searching everywhere for leads, but no luck. …

    Read the article

  • How can I recover XFS partitions from a formatted HD?

    - by giuprivite
    I deleted the partition table of my HD. I wanted to format another one, but by mistake, I formatted the wrong one. Then I also created some new partition on it. Now I would like, if possible, to recover my old data. The old configuration was this: A primary NTFS partition with Windows, and a secondary partition with four logical partitions: a swap and three XFS partitions (two for Ubuntu and OpenSuSE, and one with the home for both systems). This is the output I get when I run gpart in a terminal: ubuntu@ubuntu:~$ sudo gpart /dev/sdb Begin scan... Possible partition(Windows NT/W2K FS), size(39997mb), offset(0mb) Possible extended partition at offset(39997mb) Possible partition(Linux swap), size(8189mb), offset(39997mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(48187mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(89149mb) Possible partition(SGI XFS filesystem), size(175044mb), offset(130112mb) End scan. Checking partitions... Partition(OS/2 HPFS, NTFS, QNX or Advanced UNIX): primary Partition(Linux swap or Solaris/x86): logical Partition(Linux ext2 filesystem): logical Partition(Linux ext2 filesystem): orphaned logical Partition(Linux ext2 filesystem): orphaned logical Ok. Guessed primary partition table: Primary partition(1) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) size: 39997mb #s(81915360) s(63-81915422) chs: (0/1/1)-(1023/254/63)d (0/1/1)-(5098/254/51)r Primary partition(2) type: 015(0x0F)(Extended DOS, LBA) size: 265245mb #s(543221849) s(81915435-625137283) chs: (1023/254/63)-(1023/254/63)d (5099/0/1)-(38912/254/2)r Primary partition(3) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Primary partition(4) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Looking the first eight lines, it seems the data are still there... but I don't know how to recover them. I have a free second HD of about 500 GB (the formatted one is 320 GB) that I can use for the recovery process.

    Read the article

  • Preparing a new physical system with VMWare

    - by Max
    I need to create a new installation of Windows, but at the same time I need this computer. So I decided to create a new physical disk from within VMWare, install windows/drivers/software and then just replace the HDD in the computer. I've bought a new HDD, split it into two partions and installed Windows 7 using the VMWare's ability to use phusical disks. I can see the windows files and directories that have been created on this partition, but when I'm replacing the HDD in the host machine it cannot boot from it. Why is that? Is it at all possible to create a bootable physical disk with VMWare or I should create a virtual disk and then use some HDD imaging tool to copy the HDD image to a physical disk? Maybe there's a better way of installing a new system and working on the computer at the same time?

    Read the article

  • How to do a hexdump of first track of HDD?

    - by Daniel Gratz
    How would i do a hexdump in Ubuntu for the first track of a HDD? I am looking for a winhex-esque output if that makes sense. The first track has 63 sectors, each 512 bytes long. I tried dd if=/dev/sda bs=1 count=512 | hexdump -C but that only gave me what appears to be the MBR, or first sector of the HDD. I guess i am confused about what bs and count should be. Bs means how many bytes to display and count is how many multiples of bs? Thanks!

    Read the article

  • Clicking or Knocking with Seagate HD

    - by Daniel A. White
    My laptop's main HD makes a clicking or knocking sound when Windows or the Bios tries to access it. I put it into a SATA dock and it sounds perfectly fine when spinning up, but after Windows tries to access it, it becomes a repetitive clicking or knocking sound. Does anyone know any tips that might help me access my data? I have most of it backed up, but I would still like to Ghost it before I send it off for repairs. I know my laptop is still under warranty.

    Read the article

  • How can I recover XFS partitions from a formatted HD?

    - by giuprivite
    I deleted the partition table of my HD. I wanted to format another one, but by mistake, I formatted the wrong one. Then I also created some new partition on it. Now I would like, if possible, to recover my old data. The old configuration was this: A primary NTFS partition with Windows, and a secondary partition with four logical partitions: a swap and three XFS partitions (two for Ubuntu and OpenSuSE, and one with the home for both systems). This is the output I get when I run gpart in a terminal: ubuntu@ubuntu:~$ sudo gpart /dev/sdb Begin scan... Possible partition(Windows NT/W2K FS), size(39997mb), offset(0mb) Possible extended partition at offset(39997mb) Possible partition(Linux swap), size(8189mb), offset(39997mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(48187mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(89149mb) Possible partition(SGI XFS filesystem), size(175044mb), offset(130112mb) End scan. Checking partitions... Partition(OS/2 HPFS, NTFS, QNX or Advanced UNIX): primary Partition(Linux swap or Solaris/x86): logical Partition(Linux ext2 filesystem): logical Partition(Linux ext2 filesystem): orphaned logical Partition(Linux ext2 filesystem): orphaned logical Ok. Guessed primary partition table: Primary partition(1) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) size: 39997mb #s(81915360) s(63-81915422) chs: (0/1/1)-(1023/254/63)d (0/1/1)-(5098/254/51)r Primary partition(2) type: 015(0x0F)(Extended DOS, LBA) size: 265245mb #s(543221849) s(81915435-625137283) chs: (1023/254/63)-(1023/254/63)d (5099/0/1)-(38912/254/2)r Primary partition(3) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Primary partition(4) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Looking the first eight lines, it seems the data are still there... but I don't know how to recover them. I have a free second HD of about 500 GB (the formatted one is 320 GB) that I can use for the recovery process.

    Read the article

  • is a mini PCIe SSD worth it?

    - by Narcolapser
    Question: Is getting a mini-PCIe worth investing in? Info: I have a an Acer Aspire 1 n270. It has this mini PCIe slot that is just sitting there empty. I would like to change this, and I would like to speed up my boot time. So I've been considering getting a mini-PCIe SSD. They are about the same price as faster same size drives of the 2.5" variation. The advantage of the mini-PCIe card is that I can have my HDD still. So I have good boot time, but still have the storage of my HDD. What I want to know is: will this allow me to spin down the HDD more often allowing me to save power? Will the OS (Ubuntu 10.04 LTS) see them as separate drives? Is there anything that the mini-PCIe slot could be better used for? Thanks. ~n

    Read the article

  • How hard for a Software Developer to Maintain a Server

    - by Samy
    I'm a software developer and don't have much experience as a sysadmin. I developed a web app and was considering buying a server and hosting the web app on it. Is this a huge undertaking for a web developer? What's the level of difficulty of maintaining a server and keeping up with the latest security patches and all that kind of fun stuff. I'm a single user, and not planning to sell the service to others. Can someone also recommend an OS for my case, and maybe some good learning resources that's concise and not too overwhelming.

    Read the article

  • File system concepts (df command)

    - by mkab
    I'm finding it difficult to understand some stuffs about the df command. Suppose I type df and I have the following output Filesystem 1k-blocks Used Avail Capacity Mounted on /dev/da0s1 some number some number number percentage /win /dev/da0s2 some number some number number percentage /win/home /dev/da0s3a some number some number number percentage / devfs some number some number number percentage /dev /dev/da0s3g some number some number number percentage /local /dev/da0s3h some number some number -number 102% /reste /dev/da0s3d some number some number number percentage /tmp /dev/da1s3f some number some number number percentage /usr /dev/da1s3e some number some number number percentage /var /dev/da1s1a some number some number number percentage /public Are the answers to the following questions correct? How many physical drives do I have? Ans: 2. da0s1 and da1s1 How many physical partitions on each disk? Ans: 8 for da0s1 and 1 for da1s1 How many BSD partition on each physical partition Ans: Impossible to determine. We have to use the -T to determine its type How is it possible for the file system /dev/da0s3h filled at 102%? And where is this overflowed data written?Ans: I have no idea for this one Thanks.

    Read the article

  • S.M.A.R.T - Predictive Failure Count

    - by Bastien974
    I'm monitoring my IBM ServeRAID M5015 controller for RAID status with MegaCLI, I have this on one of the disk : Enclosure Device ID: 252 Slot Number: 6 Enclosure position: 0 Device Id: 14 Sequence Number: 2 Media Error Count: 32 Other Error Count: 0 Predictive Failure Count: 18 Last Predictive Failure Event Seq Number: 8119 PD Type: SAS Raw Size: 279.396 GB [0x22ecb25c Sectors] Non Coerced Size: 278.896 GB [0x22dcb25c Sectors] Coerced Size: 278.464 GB [0x22cee000 Sectors] Firmware state: Online, Spun Up SAS Address(0): 0x5000c50042c319c9 SAS Address(1): 0x0 Connected Port Number: 5(path0) Inquiry Data: IBM-ESXSST9300653SS B6336XN04HC10525B633 IBM FRU/CRU: 81Y9671 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive: Not Certified Drive Temperature :33 Celsius What does this mean exactly ? I can't find an exact description, is there a way to have more details ? The RAID array has the Optimal state. Media Error Count: 32 Predictive Failure Count: 18 Is there a way through the CLI to power-on the front LED so I physically know which disk I need to replace ?

    Read the article

  • Computer cannot detect hard disk

    - by Nrew
    Details: BIOS: AMI Bios, set primary master to Auto OS: Windows XP Sp2 Memory: 384 Mb Processor: Pentium 3 yeah this one is really very old. And some of the capacitors in the motherboard are already bulging. It detected the hdd yesterday when were trying to fix it and install xp. But today it cannot boot and said: Boot failure. What can you suggest that I would do to revive this old machine. What would be the problem, is it the hdd, the ide cable or the motherboard.

    Read the article

  • Windows 7 120 GB disc drive C full

    - by user234570
    I have windows 7 and my disc drive has a capacity of 120 GB. From one day to another it tells me that my disc C is full in a red bar but I dont have many programs installed. I deleted all of my videos, games, music, pictures, etc and I was able to free up 30 GB. I ran the disk cleaner and emptied the TEMP folder and garbage can but it still shows a 70GB used. Can I get some help from the experts PLEASE!!!

    Read the article

  • Strange performance from RAID5 using WD RE4 disks

    - by Howard
    I've noticed a bit of a performance issue with some WD RE4 drives I'm using under AMD's hardware RAID solution. First a bit of background: Environment: Windows 7 home premium x64 HDD's: 3x 1TB WD Raid Edition 4 in a RAID 5 setup with 128 kbyte stripe (2TB usable space) Testing Tool: HD Tune, process set to "High Priority" Processor: AMD Phenom II x6 1100T Ram: 16GB DDR3/1600mhz Motherboard: MSI 970A-G45 The image below pretty much depicts the issue I'm having. Every test has the same thing, a period of similar length where the performance drops to a few megabytes a second. This can't be a TLER issue as the purpose of RE4's is to work around that. Any help would be greatly appreciated.

    Read the article

  • Which HDD brand do you ..trust

    - by Shiki
    Okay it says its 'subjective' but I believe it's not. Basically I want to ask the community about your preference. Not really 'preference' but actual experience. Like if you never had a problem with Western Digital, then write that in an answer, or if there is one with WD, just vote it up. And so on. (Heard so many stories, experiences. I only had Samsung, Maxtor, WD, Seagate HDDs. Samsung died with bad blocks, had anomalies. Maxtor died so fast I couldn't even try it really and it's really hot, loud. Seagate is just as loud as a jet plane, and moderately hot. My WD (green) is quiet, really cool and somewhat fast. That's all I have about experiences. So I would say Western Digital in an answer (OR Hitachi. Never had one yet, but every expert I know says I should get one since they even had problems with WD but Hitachi seems to be ok. (My laptop comes with Hitachi hdd but I don't think its really relevant.)) Basically I mean desktop 7200RPM HDDs here. Well.. notebook HDDs are ok also, but no raptor/scsi/server ones. Hope you get what I meant and it won't get closed.

    Read the article

  • HD latency measurement using bonnie++ on different machines with different RAM size

    - by j0nes
    Hello, I have run bonnie++ v1.96 on two different servers without any additional load. One server is a "physical" Dell server with 32GB RAM, the other one is a virtual instance with 14GB RAM. I have read in the bonnie manuals that I should use two times the size of RAM in my bonnie runs, so I used 64GB on the physical machine and 28GB on the virtual machine. Now I want to compare the results, and I am wondering whether the results are comparable at all. The most interesting part is the latency part - on the physical machine, the values are about 10 times higher than on the virtual machine! Can I take these results seriously (e.g. the virtual machine HD is much much faster) or does the different RAM size tamper the results? Thanks! Jonas

    Read the article

  • Lost Powerpoint document somewhere between Explorer and C drive

    - by Sarah Frank
    Opened (and not saving) a Powerpoint presentation attached to an online email message. Modified the document and clicked on the Save (not Save As) and now the presentation is nowhere to be found. How do I find this document? I have run a serious search on the C drive to no avail. It's not even in the Temporary Internet Files. Computer system Windows XP Professional version 5.1.2600 Explorer version 6.0.2900

    Read the article

  • Is it possible create a 4TB bootable partition in the x86 edition of Windows Server 2003 Enterprise?

    - by Giffyguy
    I'd like to find out if there is any way to accomplish this, since it would benifit my storage server greatly. I am using a Promise FastTrak 8660 and five Seagate ST31000340NS 1TB drives in a RAID 5 array. I figure that if the x86 ENTERPRISE edition of Server 2003 can handle 64GB of RAM, it should have no problem supporting larger HDD volumes as well. I've read (somewhere...) that the Windows Server operating systems are not limited to the standard 2TB like Windows XP and 2000 are. I'm hoping it's something that just needs to be turned on, similar to the way PAE works for the 4GB RAM limit in x86 servers.

    Read the article

  • Mounting Google Driva via WebDav directly on Google

    - by WoJ
    I would like to mount on my RPi my Google Drive using davfs2 but I did not find any direct way to do it for Google Drive. There are instructions on how to use dav-pocket to indirectly do that but these are from 2010. Google group discussions about the lack of direct WebDAV access to Google are roughly from the same time and I could not find any other way to do the mount. Has anything changed and would anyone know if Google enabled WebDAV - and if so what is the URL? An alternate synchronization system would be fine as well (rsync for instance) - I did not find any particular infos either Thank you!

    Read the article

  • Issues with non-HP harddisk in HP ML 350 server?

    - by Torben Warberg Rohde
    I'm looking to buy some extra disk space for a HP ML 350 G5 server. It is for simple file-serving - not OS/system stuff. HP harddisks are insanely expensive, so I'm tempted to buy some other brand instead. I have heard that they sometime use special firmware on their disks, but I suspect that might just be HP spreading rumors to sell disks. Does anyone have experience using non-HP disks? Any features not working, or not being able to build the RAID at all? I'm looking at 2.5" SAS Seagate drives - Constellation 500 GB (7.2k) or Savvio 600 GB (10k).

    Read the article

  • Windows 7 system drive says it is raw, but System Recovery starts without issues

    - by Iulian Chira
    I have been running Windows 7 RC1 since it was available a couple of months ago and had no issues whatsoever until today. When I start my laptop, Windows does not boot but instead Windows System Recovery starts. I've used diskpart to list the partitions on the drive and my system partition (c:) has a RAW filesystem. I really need to save all data on the disk as fast as I cant and I would really like not to have to reinstall my system.

    Read the article

  • Resize a RAID 1 volume on OS X Snow Leopard - how? (Note: software raid)

    - by Emmel
    I've scoured the Internet in search of an answer to this question, and as usual with OSX-related topics, I often don't find any deep-dive technical explanations sufficient enough to feel confident doing dangerous things. Here is my question: I have a Mac Pro, running OS X 10.6.2. I have, as my main root/boot disk, a RAID 1 volume called "Mirror1". Mirror1 is comprised of two 1 TB disks. Mirror1, however, is fixed at 640 GB. That's because, I originally took a 640GB disk, bought a terabyte disk, mirrored it (using diskutil appleraid enable), when it synced I removed the 640GB and replaced it with a second 1 TB disk, and synced again. Voila! A single 640 GB replaced by two 1 TB disks in a mirror.. Actually, no. There's still something missing from the equation: Mirror1 needs to be expanded from 640GB to 1 TB to match the partition sizes on each of those disks. How do I do this? Perhaps the diskutil output will help: -> diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI 209.7 MB disk0s1 2: Apple_RAID 999.9 GB disk0s2 3: Apple_Boot Boot OSX 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk1 1: EFI 209.7 MB disk1s1 2: Apple_RAID 999.9 GB disk1s2 3: Apple_Boot Boot OSX 134.2 MB disk1s3 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *640.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Mac Disk 2 536.7 GB disk2s2 3: Microsoft Basic Data BOOTCAMP 103.1 GB disk2s3 /dev/disk3 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Mirror1 *639.8 GB disk3 -> diskutil appleraid list AppleRAID sets (1 found) =============================================================================== Name: Macintosh HD Unique ID: 1953F864-B474-4EB6-8E69-41834EBD0247 Type: Mirror Status: Online Size: 639.8 GB (639791038464 Bytes) Rebuild: manual Device Node: disk3 ------------------------------------------------------------------------------- # Device Node UUID Status ------------------------------------------------------------------------------- 0 disk1s2 25109BAE-5697-40EA-B612-0217851444F7 Online 1 disk0s2 11B83AB0-8148-4DB6-8761-DEF08C855F8D Online =============================================================================== Thanks in advance.

    Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >