Search Results

Search found 4277 results on 172 pages for 'mark peters'.

Page 113/172 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• Dell PR03X port replicator and DisplayPort to DVI adapter not detecting second monitor

  - by yothenberg

  Hi, I have a dell M4400 connected to a PR03X port replicator/docking station. I use the DVI port to connect it to a first Dell 2208WFP monitor and I'm trying to use a DisplayPort-to-DVI adapter to connect it to a second Dell 2208WFP monitor. The second monitor, connected via the DisplayPort-to-DVI adapter immediately goes into sleep mode and the laptop doesn't detect it. What is really weird is that it did detect it the first time I plugged it in but after I unplugged the monitor and plugged it back in it stopped working. I swapped the monitors round and it detected them both but after unplugging the monitor connected via the DisplayPort-to-DVI and plugging it in again it stopped working. Both monitors work if plugged in directly to the DVI port. Is there some way to force re-detection? Any ideas? Thanks, Mark

  Read the article

• "Request not supported" in IPCONFIG (WinXP SP3)

  - by pablog

  In a customer PC (Windows XP SP3), suddenly the network went down: the network adapter appears with an error mark. I replaced the network card, but the new one does the same thing. When I enter IPCONFIG, XP shows this error (in standard and safe mode): Internal error occurred Request not supported Unable to query host name If I start the system with a boot cd the PC runs fine, so the problem seems to be in the XP installation. I tried: uninstalling and reinstalling the network card in the Device Manager disabling and reenabling the card netsh int ip reset netsh winsock reset catalog and a couple of "reset" programs (WinsockxpFix.exe, etc) with no luck. Is there any way to fix it without reinstalling XP? TIA, Pablo

  Read the article

• prevent apt dependency from being satisfied (permanently)

  - by Bryan Hunt

  I want to install mailman (just to use it's mail archiving feature) but Ubuntu wants to pull down a load of extra dependencies. sudo apt-get install mailman Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: apache2 apache2-mpm-worker apache2.2-common Suggested packages: apache2-doc apache2-suexec apache2-suexec-custom spamassassin lynx listadmin Is there any way to mark those packages ( apache2 apache2-mpm-worker apache2.2-common ) as never to be installed? This is not 2002 ;)

  Read the article

• Debian 5 server is randomly shutting down.

  - by revofreak

  My debian 5 vps is suffering from random shutdowns. I reinstalled it several times, the hosts moved me to a different physical box, check the install image and said everyone else also uses it and is fine. Heres the output from syslog Mar 27 00:19:19 noobintraining-1 -- MARK -- Mar 27 00:32:01 noobintraining-1 shutdown[18142]: shutting down for system halt Mar 27 00:32:06 noobintraining-1 init: Switching to runlevel: 0 Mar 27 00:32:06 noobintraining-1 xinetd[15907]: Exiting... Mar 27 00:32:07 noobintraining-1 named[15865]: received control channel command 'stop -p' Mar 27 00:32:07 noobintraining-1 named[15865]: shutting down: flushing changes Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on 127.0.0.1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on ::1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on ::#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 127.0.0.1#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 89.238.172.132#53 Mar 27 00:32:07 noobintraining-1 named[15865]: exiting Mar 27 00:32:07 noobintraining-1 exiting on signal 15 Any help is most appreciated!

  Read the article

• My saved drafts become unread email in Windows Live Mail and Gmail IMAP

  - by Valamas

  I have setup windows live mail with my gmail account in IMAP mode. When I draft an email and save it. It saves in the drafts automatically. Within a minute, my WLM sound alerts new mail and shows mail icon in the system tray. However, this is for the draft I have saved which appears unread. To make the mail notification icon go away in the system tray, I go off and mark the draft as read. This repetition is tedious and distracting. How can I avoid this annoyance? thanks

  Read the article

• Windows apps keep switching to accented text

  - by Josh Kelley

  Somehow I keep hitting a shortcut key (or something similar) that enables the input of accented text. Whenever this accented text mode is enabled, pressing ' doesn't respond immediately; instead, the ' key is remembered, so if I press a vowel after that, I get the vowel with an acute accent mark, and if I press any other key, I immediately get an apostrophe followed by the other key. I don't want this to happen. It's very annoying. How do I disable this mode? I only remember seeing this in Firefox 3.6.3 and Pidgin 2.6.6, so maybe it's a GTK feature. It apparently happens on a per-application basis, and restarting the application fixes it. I checked Windows 7's "Region and Language" control panel and didn't see anything relevant (although I'm not intimately familiar with all of those settings, so I may have overlooked something).

  Read the article

• Tomcat memory usage grows until crash with no GC run

  - by Phil

  I'm administrating a server running Tomcat that is getting a lot of traffic lately. If I monitor memory usage in Task Manager I can see the memory usage growing and eventually tomcat crashes around the 1GB mark. Here's the memory relevent bits I've set in Tomcat Properties (this is a Windows Server): Intial memory pool: 1024 MB Maximum memory pool: 1024 MB -XX:MaxPermSize=256M The weird thing is since these problems arose I've deployed Lambda Probe to the Tomcat instance and the memory usage values I see there are much lower, for example Task Manager might show 467MB used while the "Total" used in Probe is 212 MB. Also, the Maximum Total listed in Probe is 1.29GB, when I would have expected 1GB, the maximum memory set above. If I force the garbage collector to run using Probe, I can keep Tomcat from crashing for a while (indefinitely, AFAIK). So why doesn't the GC run automatically and stop Tomcat from crashing? Thanks.

  Read the article

• Windows 7 Printing to a network printer

  - by JohnyV

  We have a 2008 server as our print server. Clients that use windows xp with a logon script to map have no problems printing. When I test printing to a network printer on a windows 7 machine it works fine up to a few machines as soon As i get 12-15 workstations trying to print, when they log in they get the yellow exclamation mark and needs troubleshooting against the printer name. It is being deploy by group policy. I have tried to deploy it by group policy also by group policy preferences and by using a script and i get the same error whatever i try. Does anyone have any suggestions to try and troubleshoot? Once again Windows xp clients have no issues printing at all. It is only windows 7 clients. Thanks

  Read the article

• Server hard disk read speed and client download speed, is there a connection? [closed]

  - by Mywiki Witwiki

  Ok so a client's download speed is only as fast as a server's upload speed, and vice versa. Based on the answers to this post: Does upload speed depend upon download speed of the server? In other words, the data transfer rate between the two computers is only as fast as the speed of the "bottleneck". Let's pretend the two computers are in two different networks and both have 100Mbps internet connection. Ben wants a copy of a file in Mark's computer hard disk with 30Mbps read speed. Does this mean that Ben can download the file at a speed of around 30Mbps only, despite having an internet connection faster than 30Mbps?

  Read the article

• Where can I find a list of the highest resolution monitors for sale?

  - by speedmetal

  I am always on the lookout for the latest and greatest monitors, but for some reason, I have never found a good resource for this information. And while we know months in advance what new processor will be released, it doesn't seem like we ever know what new monitors will be released until they are. I am tempted to buy a Dell 3008WFP, but since the 30" 2560x1600 monitors have been out for 6 years, I would expect something better is about to be released. Where can I find out what is available in the high resolution / widescreen market and what is soon to be released? EDIT: I did finally find a resource for this information: Comprehensive List of IPS Based LCD Monitors However, if anyone finds another similar or possibly better resource, I will give it a correct answer mark. Thanks!

  Read the article

• How to create dynamic Scatter Plot/Matrix with labels and categories on both axis in Excel 2010?

  - by user1581900

  Let us consider a following data set: Name | Age | Hair Color ----------------------------- John | Young | Brown Sophie | Old | Blond Adam | Mature| Blond Mark | Teen | Dark Jeremy | Old | Grey Alex | Young | Brown etc... Both Age and Hair Color, can take only defined values(Young/teen/mature/old and Blond/brown/Dark/Grey). Name is the only real variable here. I want to create a Scatter Plot / Matrix that will look something like that: I know that I schould use this tool to add labels to the scatter plot. I also found this youtube video that explains how to display categories on Y-axis Moreover I need the chart to be dynamic as explained in another youtube video. How do I combine all these approaches to get a Scatter Plot with categories as values on both axis?

  Read the article

• How do I insert a newline within a long formula using OpenOffice.org Math?

  - by Lekensteyn

  I've the following formula: (x^6+x^4+x^2+x+1)(x^7+x+1) = x^13+x^11+x^9+x^8+x^7+ x^7+x^5+x^3+x^3+x^2+x+ x^6+x^4+x^2+x+1 = x^13+x^11+x^9+x^8+2x^7+x^6+x^5+x^4+2x^3+2x^2+2x+1 Putting this in OpenOffice.org Math causes every line be concatenated, which I want to avoid. I've already tried putting newline between the lines, but it adds a strange question mark in the formula. Using matrices did not work for me either. I want to achieve a nicely formatted formula like this one (taken from FIPS 197 pdf):

  Read the article

• dell vostro 1310 with nVidia 8400M display problem

  - by Arthur

  Hi everyone, i hope someone can help me with this problem. I have a Dell vostro 1310 Laptop with 32 bit vista and a 8400M nVidia chip. Recently i have noticed performance issues when my girlfriend was playing Sims 3, and then one day i turned it on and all i got was a thick white line at the bottom of the screen. i heard the OS start up so automatically i thought it was a damaged screen, but i had doubts so i plugged it into an external display via the vga port. it worked but everything appart worm the OS choice menu looks distorted beyond belief. even the bios screen had multicoloured lines running down the screen. The resolution is non existant, the screen only shows a 256 colour pallette and is heavily distorted. i barely managed to get to the device manager where i found the gfx card with an exclamation mark. does anybody have suggestions? should i buy a new mobo or are repairs possible? thanks in advance

  Read the article

• Showing protocol specific mini icons for Jabber/XMPP gateway contacts

  - by aef

  Since a short while I'm using Ubuntu Oneiric Ocelot (11.10) with gnome-shell (Gnome 3) and I'm trying to get accustomed to the default Empathy Instant Messaging client. I'm using a gateway service on the side of my Jabber/XMPP server to communicate with lots of contacts over proprietary networks like ICQ or MSN. So I don't use Empathy's native support for ICQ and MSN, and I don't want to change back to using such a thing for various reasons. One thing that annoys me is that Empathy does not make it clear to me that these contacts are from another instant messaging network. If I enable the View Show Protocols option they are all recognized as Jabber/XMPP contacts. Although I perfectly understand why that happens, I would like to be able to change this behavior to make Empathy mark these contacts correctly. Is there a configuration option or a plugin for this? Or may this feature still be in development and will be available later?

  Read the article

• Debian 5 is randomly shutting down.

  - by revofreak

  My debian 5 vps is suffering from random shutdowns. I reinstalled it several times, the hosts moved me to a different physical box, check the install image and said everyone else also uses it and is fine. Heres the output from syslog Mar 27 00:19:19 noobintraining-1 -- MARK -- Mar 27 00:32:01 noobintraining-1 shutdown[18142]: shutting down for system halt Mar 27 00:32:06 noobintraining-1 init: Switching to runlevel: 0 Mar 27 00:32:06 noobintraining-1 xinetd[15907]: Exiting... Mar 27 00:32:07 noobintraining-1 named[15865]: received control channel command 'stop -p' Mar 27 00:32:07 noobintraining-1 named[15865]: shutting down: flushing changes Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on 127.0.0.1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on ::1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on ::#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 127.0.0.1#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 89.238.172.132#53 Mar 27 00:32:07 noobintraining-1 named[15865]: exiting Mar 27 00:32:07 noobintraining-1 exiting on signal 15 Any help is most appreciated!

  Read the article

• MacBook Refuses to Boot

  - by pas09

  I have a MacBook that has unfortunately died on me. I randomly got a pop up message that said I needed to restart my computer, and once I did, I was greeted with the blinking folder question mark start up screen. I've tried everything, including running Disk Utility repair and reformatting the hard drive and reinstalling OS X. All of my data is backed up and safe, I just need my computer to start again. Before I go off and buy a new hard drive, I wanted to see if there is anything I might have forgotten.

  Read the article

• Distribute terrabyte files to the public from web server

  - by MarkJ

  Hi We need to set up a website which makes two or three large files publicly available - the files will be 1 or 2 terrabytes each. Although they will be public, in practise I expect only a relatively small number of scientists will want to download them. What is the best way to allow this? I've had a quick talk to a web-hosting provider (rackspace) and they suggested a hybrid solution. An entry-level managed server (we predict fairly low traffic for the website, but we do need to install some custom CGI software). Some cloud storage which hooks into Limelight Networks. This would host the large files, for download by FTP. It sounded OK to me but I know relatively little about server administration. Does it make sense? Thanks in advance, Mark

  Read the article

• Why can't connect with second computer in same LAN and settings?

  - by user930450

  I'm trying to connect to WLAN with notebook. The notebook works fine with other WLANs. It can authenticate, signal is "very good" but it says "can't access internet". (On Windows it's small yellow exclamation mark on the signal). With other computer exactly in the same location, with the same settings, it's possible to connect. Both are configurated to get IP dynamically. One difference is that the other computer is using "Ralink wireless" instead normal windows client to connect. But does this make a difference? the settings are the same. What could be the reason?

  Read the article

• Setup secure shared hosting (Apache, PHP, MySQL)

  - by Apaz

  So I'm setting up a shared hosting with Apache, PHP, MySQL and the biggest question mark is how to do with PHP, since there is a million options out there how to configure it securely. The plan is: Chroot for MySQL (built in support for chroot) Chroot for Apache (mod_security) Each user executing their PHP-scripts as their own user (see below) Set open_basedir Disable all "evil" php-functions (allow_url_fopen, system, exec, and so on) Ive looked at suexec and suphp but they seems very slow; http://blog.stuartherbert.com/php/2007/12/18/using-suexec-to-secure-a-shared-server/ http://blog.stuartherbert.com/php/2008/01/18/using-suphp-to-secure-a-shared-server/ So I've looked some more and found some other solutions: apache2-mpm-itk + mod_php(?) mod_fcgid + php-fpm mod_fastcgi + php-fpm Ive tried a simple setup with mod_fastcgi + php-fpm and it seems to work, runs as correct user and so on, but the protection against directory traveling is still open_basedir(?) One solution for that could be to use php-fpm's chroot option, but that causes a lot of other issues like domain name resolver does not work sending mail does not work Tips?

  Read the article

• Browser pollution / Pop Up request

  - by PatrickS

  From time to time, when I browse the internet , after entering a site's URL , I get a warning message that a pop up has been blocked , then a question mark and a set of numbers appends itself after the URL. It doesn't matter what site I want to navigate to, it can be a site I have developed, a well know site like drupal.org for instance. Here's what happens: enter url: example.com warning: pop up blocked url change to: example.com/?1347628900 After checking the pop up ( which of course turns out to be an unwanted ad ), i deducted that the request and the pop up were linked. This has never happened to me before, I'm not sure how this got started, how can I get rid of this? Clearing the cache , cookies etc... doesn't solve the issue. I'm using a Macbook Pro OS10.6.7 , Chrome 13.0.782.24 beta. Thanks in advance for any tips!

  Read the article

• Outlook - responding with a pre-defined message

  - by Dave Rook

  I am trying to be able to reply to an email with a pre-defined message. Every day, I get asked to do the same tasks and I have to reply to each with exactly the same email, similar to: Hi, I received your email, I have now started the task for you. Regards, Dave Tutorials I have found using the email template is more about starting a new email as opposed to replying (as it doesn't appear to keep the thread). In my ideal world, I would like to click reply and insert a pre-written message. The only way I've worked out how to do this is to 'cheat' some what and use the signature as the entire email response (and actually does the job very well other than leaving a space above my reply) I have found similar questions on Super User and other websites but have had no luck, nor have I from my own Google searches. Does any one have any other solutions? Solved This is now solved - in 2 days from this post I can mark it as answer.

  Read the article

• How to prevent Spell checking code in MS Office?

  - by Aaron

  We use MS Office. Outlook for emails, Word for some documentation and I use OneNote a lot for my own note taking. What bugs me is when I drop some code or use key words or even camel case into these apps the spell checking picks them up and I have red squiggles everywhere. Ignore is pretty much useless, so either I have to turn off Spell Check altogether start adding these to the custom dictionary. What would be good is if I can use the Set Language function to mark a whole block of text to just not be spell checked. Has anyone found a nice solution to this or do you know of a blank dictionary is best to use? I found using "Mohawk" kind of does that... might just use that for now. Maybe create a macro to switch between them.

  Read the article

• capture nimbuzz traffic

  - by lurscher

  I need to capture all the traffic, specially during login, between nimbuzz pc client and nimbuzz server. The reason is that i need to debug outgoing packets at login that mark the user visibility status in order to reproduce them in a in-house XMPP client application I've tried doing this with wireshark, but i seem to be pretty helpless with this tool. Also, the packets i've been able to see are all before the SASL negotiation happens, after that, i cannot see the xml packets being exchanged any help for how to achieve this task is greatly appreciated (preferably on Windows, since there is no nimbuzz client for linux, in any case i can install one in a VM and monitor the traffic between the VM instance in the linux host)

  Read the article

• Avoiding syslog-ng noise from cron jobs [closed]

  - by Eyal Rozenberg

  Possible Duplicate: How can I prevent cron from filling up my syslog? On my small Debian squeeze web server, I have syslog-ng installed. Generally, my logs are nice and quiet, with nice -- MARK -- lines. My syslog, however, is littered with this Sep 23 23:09:01 bookchin /USR/SBIN/CRON[24885]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete > /dev/null) Sep 23 23:09:01 bookchin /USR/SBIN/CRON[24886]: (root) CMD ( [ -d /var/lib/php4 ] && find /var/lib/php4/ -type f -cmin +$(/usr/lib/php4/maxlifetime) -print0 | xargs -r -0 rm > /dev/null) Sep 23 23:17:01 bookchin /USR/SBIN/CRON[24910]: (root) CMD ( cd / && run-parts /etc/cron.hourly) kind of garbage. What's the clean way to avoid it?

  Read the article

• The "System" process has my BCD open(windows 7)?

  - by Epic_orange

  I discovered this when I tried to use EasyBCD to well, edit by bcd, but it said "The current file is in use and cannot be opened by EasyBCD..." So I tried to use handle.exe to stop it but it said \Handle>handle -c 15C -p 4 Handle v3.46 Copyright (C) 1997-2011 Mark Russinovich Sysinternals - www.sysinternals.com 15C: File (---) C:\Boot\BCD Close handle 15C in System (PID 4)? (y/n) y Error closing handle: The handle is invalid. Why does system have my bcd open and how can i stop it? I have tried rebooting and googling.

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >