Search Results

Search found 21717 results on 869 pages for 'setup versions'.

Page 113/869 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

  • SQL SERVER – Retrieve and Explore Database Backup without Restoring Database – Idera virtual databas

    - by pinaldave
    I recently downloaded Idera’s SQL virtual database, and tested it. There are a few things about this tool which caught my attention. My Scenario It is quite common in real life that sometimes observing or retrieving older data is necessary; however, it had changed as time passed by. The full database backup was 40 GB in size, and, to restore it on our production server, it usually takes around 16 to 22 minutes, depending on the load server that is usually present. This range in time varies from one server to another as per the configuration of the computer. Some other issues we used to have are the following: When we try to restore a large 40-GB database, we needed at least that much space on our production server. Once in a while, we even had to make changes in the restored database, and use the said changed and restored database for our purpose, making it more time-consuming. My Solution I have heard a lot about the Idera’s SQL virtual database tool.. Well, right after we started to test this tool, we found out that it really delivers what it promises. Using this software was very easy and we were able to restore our database from backup in less than 2 minutes, sparing us from the usual longer time of 16–22 minutes. The needful was finished in a total of 10 minutes. Another interesting observation is that there is no need to have an additional space for restoring the database. For complete database restoration, the single additional MB on the drive is not required anymore. We can use the database in the same way as our regular database, and there is no need for any additional configuration and setup. Let us look at the most relevant points of this product based on my initial experience: Quick restoration of the database backup No additional space required for database restoration virtual database has no physical .MDF or .LDF The database which is restored is, in fact, the backup file converted in the virtual database. DDL and DML queries can be executed against this virtually restored database. Regular backup operation can be implemented against virtual database, creating a physical .bak file that can be used for future use. There was no observed degradation in performance on the original database as well the restored virtual database. Additional T-SQL queries can be let off on the virtual database. Well, this summarizes my quick review. And, as I was saying, I am very impressed with the product and I plan to explore it more. There are many features that I have noticed in this tool, which I think can be very useful if properly understood. I had taken a few screenshots using my demo database afterwards. Let us see what other things this tool can do besides the mentioned activities. I am surprised with its performance so I want to know how exactly this feature works, specifically in the matter of why it does not create any additional files and yet, it still allows update on the virtually restored database. I guess I will have to send an e-mail to the developers of Idera and try to figure this out from them. I think this tool is very useful, and it delivers a high level of performance way more than what I expected. Soon, I will write a review for additional uses of SQL virtual database.. If you are using SQL virtual database in your production environment, I am eager to learn more about it and your experience while using it. The ‘Virtual’ Part of virtual database When I set out to test this software, I thought virtual database had something to do with Hyper-V or visualization. In fact, the virtual database is a kind of database which shows up in your SQL Server Management Studio without actually restoring or even creating it. This tool creates a database in SSMS from the backup of the same database. The backup, however, works virtually the same way as original database. Potential Usage of virtual database: As soon as I described this tool to my teammate, I think his very first reaction was, “hey, if we have this then there is no need for log shipping.” I find his comment very interesting as log shipping is something where logs are moved to another server. In fact, there are no updates on the database from log; I would rather compare it with Snapshot Replication. In fact, whatever we use, snapshot replicated database can be similarly used and configured with virtual database. I totally believe that we can use it for reporting purpose. In fact, after this database was configured, I think the uses of this tool are unlimited. I will have to spend some more time studying it and will get back to you. Click on images to see larger images. virtual database Console Harddrive Space before virtual database Setup Attach Full Backup Screen Backup on Harddrive Attach Full Backup Screen with Settings virtual database Setup – less than 60 sec virtual database Setup – Online Harddrive Space after virtual database Setup Point in Time Recovery Option – Timeline View virtual database Summary No Performance Difference between Regular DB vs Virtual DB Please note that all SQL Server MVP gets free license of this software. Reference: Pinal Dave (http://blog.SQLAuthority.com), Idera (virtual database) Filed under: Database, Pinal Dave, SQL, SQL Add-On, SQL Authority, SQL Backup and Restore, SQL Data Storage, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, SQLAuthority News, T SQL, Technology Tagged: Idera

    Read the article

  • Install SharePoint 2013 on a two server farm

    - by sreejukg
    When SharePoint 2010 was released, I published an article on how to install SharePoint on a two server farm. You can find that article from the below link. http://weblogs.asp.net/sreejukg/archive/2010/09/28/install-sharepoint-2010-in-a-farm-environment.aspx Now it is the time for SharePoint 2013. SharePoint 2013 brings lots of improvements to the topologies, but still supports two-server architecture. Be noted that “two-server architecture” is meant for small implementations with limited service applications. Refer the below link to understand more about the SharePoint architecture http://technet.microsoft.com/en-us/sharepoint/fp123594.aspx A two tier farm consists of a database server and a web/application server as follows. In this article I am going to explain how to install SharePoint in a two server farm. I prepared 2 servers, both of them joined to a domain(SP2013Domain), and in one server I installed SQL Server 2012 (Server name: SP2013_DB). Now I am going to install SharePoint 2013 in the second server (Server Name: SP2013). The following domain accounts are created for the installation.   User Account Purpose Server roles required SQLService - SQL Server service account - This account is used as the service account for SQL Server. - domain user account / local account spSetup - You will be running SharePoint setup and SharePoint products and configuration wizard using this account. -domain user account - Member of the Administrators group on each server on which Setup is run(In our case SP2013) - SQL Server login on the computer running SQL Server - Member of the Server admin SQL Server security role spDataaccess - Configure and manage server farm. This - Application pool identity for central admin website - Microsoft SharePoint Foundation Workflow Timer Service Domain user account (Other permissions will be set to this account automatically)   The above are the minimum list of accounts needed for SharePoint 2013 installation. Now you need additional accounts for services, application pool identities for web applications etc. Refer the service accounts requirements for SharePoint from the below link. http://technet.microsoft.com/en-us/library/cc263445.aspx In order to install SharePoint 2013 login to the server using setup account(spsetup). Now run the setup from the installation media. First you need to install the pre-requisites. During the installation process, the server may restart several times. The installation wizard will guide you through the installation. In the next step, you need to agree on the terms and conditions as usual. Once you click next, the installation will start immediately. The installation wizard will let you know the progress of the installation. During the installation you may receive notifications to restart the server, you need to just click the finish button so that the system will be restarted. Once all the pre-requisites are installed, you will get the success message as below. Click finish to close the dialog. Now from the media, run the setup again and this time you choose install SharePoint server. In the next screen, you need to enter the product key, and then click continue. Now you need to agree on the terms and conditions for SharePoint 2013, and click continue. Choose the file location as per your policies and click on the install now button. You will see the installation progress. Once completed, you will see the installation completed dialog. Make sure you select the run products and configuration wizard option and click close. From the start screen, click next to start the configuration wizard. You will receive warning telling you some of the services will be stopped during the installation. Select “create new server farm” radio button and click next. In the next step, you need to enter the configuration database settings. Enter the database server details and then specify the database access account. You need to specify the farm account(spdataaccess). The wizard will grant additional privileges to the account as needed. In the next step you need to specify the passphrase, you need to note this as you need this passphrase if you add additional server to the farm. In the next step, you need to enter the central administration website port and security settings. You can choose a port or just keep it as suggested by the wizard. Click next, you will see the summary of what you have been selected. Verify the selected settings and if you want to change any, just click back and change them, or click continue to start the configuration. The configuration may take some time, you can view the progress, in case of any error, you will get the log file, you need to fix any error and again start the configuration wizard. Once the configuration successful, you will see the success message. Just click finish. Now you can browse the central administration website. It is good to check the health analyzer to review whether there are any errors/warnings. No warnings/errors indicate a good installation. Two-Server architecture is the least configuration for production environments. For small firms with less number of employees can implement SharePoint 2013 using this topology and as the workload increases, they can add more servers to the farm without reconstructing everything.

    Read the article

  • Synergy - easy share of keyboard and mouse between multiple computers

    Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

    Read the article

  • Office 2013 OCT unhandled exception when saving .RSP

    - by user52874
    I'm trying to prepare a deployment of office 2013 pro plus. If I deploy an existing .rsp file that was left behind by the old analyst (typing from the client): PS C: \\deploybox\software\Office2013\setup.exe /adminfile \\deploybox\software\Office2013\SWKS.MSP Things seem to deploy just fine. if I make any changes to the .rsp file by doing (all from the client): PS C: \\deploybox\software\Office2013\setup.exe /admin * Open SWKS.MSP * Make changes * Save under a different name SWKS1.MSP I get the following errorbox: Unhandled Exception: MsiGetSummaryInformation call failed. And if I try to deploy the new SWKS1.MSP, PS C: \\deploybox\software\Office2013\setup.exe /adminfile \\deploybox\software\Office2013\SWKS1.MSP it fails with the message: Path or file specified with /adminfile did not contain any customization patches that apply to this product or platform. If I even open the old known good .rsp file SWKS.MSP, and immediately save it as a new name SWKS1.MSP, making no changes, then the same thing happens. So what stupid newbie mistake am I making here? Thanks!

    Read the article

  • How To Run XP Mode in VirtualBox on Windows 7 (sort of)

    - by Matthew Guay
    A few weeks ago we showed you how to run XP Mode on a Windows 7 computer without Hardware Virtualization using VMware. Some of you have been asking if it can be done in Virtual Box as well. The answer is “Yes!” and here we’ll show you how. Editor Update: Apparently there isn’t a way to activate XP Mode through VirtualBox using this method. You will however, be able to run it for 30 days. We have a new updated article on how to Install XP Mode with VirtualBox Using the VMLite Plugin.   Earlier we showed you how to run XP mode on windows 7 machines without hardware virtualization capability. Since then, a lot of you have been asking to a write up a tutorial about doing the same thing using VirtualBox.  This makes it another great way to run XP Mode if your computer does not have hardware virtualization.  Here we’ll see how to import the XP Mode from Windows 7 Professional, Enterprise, or Ultimate into VirtualBox so you can run XP in it for free. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. In our tests we were able to get it to run on Home Premium as well, but you’ll be breaking Windows 7 licensing agreements. Getting Started First, download and install XP Mode (link below).  There is no need to download Virtual PC if your computer cannot run it, so just download the XP Mode from the link on the left. Install XP mode; just follow the default prompts as usual. Now, download and install VirtualBox 3.1.2 or higher(link below).  Install as normal, and simply follow the default prompts. VirtualBox may notify you that your network connection will be reset during the installation.  Press Yes to continue. During the install, you may see several popups asking you if you wish to install device drivers for USB and Network interfaces.  Simply click install, as these are needed for VirtualBox to run correctly. Setup only took a couple minutes, and doesn’t require a reboot. Setup XP Mode in VirtualBox: First we need to copy the default XP Mode so VirtualBox will not affect the original copy.  Browse to C:\Program Files\Windows XP Mode, and copy the file “Windows XP Mode base.vhd”.  Paste it in another folder of your choice, such as your Documents folder. Once you’ve copied the file, right-click on it and click Properties. Uncheck the “Read-only” box in this dialog, and then click Ok. Now, in VirtualBox, click New to create a new virtual machine. Enter the name of your virtual machine, and make sure the operating system selected is Windows XP. Choose how much memory you want to allow the virtual machine to use.  VirtualBox’ default is 192 Mb ram, but for better performance you can select 256 or 512Mb. Now, select the hard drive for the virtual machine.  Select “Use existing hard disk”, then click the folder button to choose the XP Mode virtual drive. In this window, click Add, and then browse to find the copy of XP Mode you previously made. Make sure the correct virtual drive is selected, then press Select. After selecting the VHD your screen should look like the following then click Next. Verify the settings you made are correct. If not, you can go back and make any changes. When everything looks correct click Finish. Setup XP Mode Now, in VirtualBox, click start to run XP Mode. The Windows XP in this virtual drive is not fully setup yet, so you will have to go through the setup process.   If you didn’t uncheck the “Read-only” box in the VHD properties before, you may see the following error.  If you see it, go back and check the file to makes sure it is not read-only. When you click in the virtual machine, it will capture your mouse by default.  Simply press the right Ctrl key to release your mouse so you can go back to using Windows 7.  This will only be the case during the setup process; after the Guest Additions are installed, the mouse will seamlessly move between operating systems. Now, accept the license agreement in XP.   Choose your correct locale and keyboard settings. Enter a name for your virtual XP, and an administrative password. Check the date, time, and time zone settings, and adjust them if they are incorrect.  The time and date are usually correct, but the time zone often has to be corrected. XP will now automatically finish setting up your virtual machine, and then will automatically reboot. After rebooting, select your automatic update settings. You may see a prompt to check for drivers; simply press cancel, as all the drivers we need will be installed later with the Guest Additions. Your last settings will be finalized, and finally you will see your XP desktop in VirtualBox. Please note that XP Mode may not remain activated after importing it into VirtualBox. When you activate it, use the key that is located at C:\Program Files\Windows XP Mode\key.txt.  Note: During our tests we weren’t able to get the activation to go through. We are looking into the issue and will have a revised article showing the correct way to get XP Mode in VirutalBox working correctly soon.    Now we have one final thing to install – the VirtualBox Guest Additions.  In the VirtualBox window, click “Devices” and then select “Install Guest Additions”. This should automatically launch in XP; if it doesn’t, click Start, then My Computer, and finally double-click on the CD drive which should say VirtualBox Guest Additions. Simply install with the normal presets. You can select to install an experimental 3D graphics driver if you wish to try to run games in XP in VirtualBox; however, do note that this is not fully supported and is currently a test feature. You may see a prompt informing you that the drivers have not passed Logo testing; simply press “Continue Anyway” to proceed with the installation.   When installation has completed, you will be required to reboot your virtual machine. Now, you can move your mouse directly from Windows XP to Windows 7 without pressing Ctrl. Integrating with Windows 7 Once your virtual machine is rebooted, you can integrate it with your Windows 7 desktop.  In the VirtualBox window, click Machine and then select “Seamless Mode”.   In Seamless mode you’ll have the XP Start menu and taskbar sit on top of your Windows 7 Start and Taskbar. Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. Another view of everything running seamlessly together on the same Windows 7 desktop. Hover the pointer over the XP taskbar to pull up the Virtual Box menu items. You can exit out of Seamless Mode from the VirtualBox menu or using “Ctrl+L”. Then you go back to having it run separately on your desktop again. Conclusion Running XP Mode in a Virtual Machine is a great way to experience the feature on computers without Hardware Virtualization capabilities. If you prefer VMware Player, then you’ll want to check out our articles on how to run XP Mode on Windows 7 machines without Hardware Virtualization, and how to create an XP Mode for Windows 7 Home Premium and Vista. Download VirtualBox Download XP Mode Similar Articles Productive Geek Tips Install XP Mode with VirtualBox Using the VMLite PluginUsing Windows 7 or Vista Compatibility ModeMake Safari Stop Crashing Every 20 Seconds on Windows VistaForce Windows 7 / Vista to Boot Into Safe Mode Without Using the F8 KeyHow To Run Chrome OS in VirtualBox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • How To Run XP Mode in VirtualBox on Windows 7 (sort of)

    - by Matthew Guay
    A few weeks ago we showed you how to run XP Mode on a Windows 7 computer without Hardware Virtualization using VMware. Some of you have been asking if it can be done in Virtual Box as well. The answer is “Yes!” and here we’ll show you how. Editor Update: Apparently there isn’t a way to activate XP Mode through VirtualBox using this method. You will however, be able to run it for 30 days. We have a new updated article on how to Install XP Mode with VirtualBox Using the VMLite Plugin.   Earlier we showed you how to run XP mode on windows 7 machines without hardware virtualization capability. Since then, a lot of you have been asking to a write up a tutorial about doing the same thing using VirtualBox.  This makes it another great way to run XP Mode if your computer does not have hardware virtualization.  Here we’ll see how to import the XP Mode from Windows 7 Professional, Enterprise, or Ultimate into VirtualBox so you can run XP in it for free. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. In our tests we were able to get it to run on Home Premium as well, but you’ll be breaking Windows 7 licensing agreements. Getting Started First, download and install XP Mode (link below).  There is no need to download Virtual PC if your computer cannot run it, so just download the XP Mode from the link on the left. Install XP mode; just follow the default prompts as usual. Now, download and install VirtualBox 3.1.2 or higher(link below).  Install as normal, and simply follow the default prompts. VirtualBox may notify you that your network connection will be reset during the installation.  Press Yes to continue. During the install, you may see several popups asking you if you wish to install device drivers for USB and Network interfaces.  Simply click install, as these are needed for VirtualBox to run correctly. Setup only took a couple minutes, and doesn’t require a reboot. Setup XP Mode in VirtualBox: First we need to copy the default XP Mode so VirtualBox will not affect the original copy.  Browse to C:\Program Files\Windows XP Mode, and copy the file “Windows XP Mode base.vhd”.  Paste it in another folder of your choice, such as your Documents folder. Once you’ve copied the file, right-click on it and click Properties. Uncheck the “Read-only” box in this dialog, and then click Ok. Now, in VirtualBox, click New to create a new virtual machine. Enter the name of your virtual machine, and make sure the operating system selected is Windows XP. Choose how much memory you want to allow the virtual machine to use.  VirtualBox’ default is 192 Mb ram, but for better performance you can select 256 or 512Mb. Now, select the hard drive for the virtual machine.  Select “Use existing hard disk”, then click the folder button to choose the XP Mode virtual drive. In this window, click Add, and then browse to find the copy of XP Mode you previously made. Make sure the correct virtual drive is selected, then press Select. After selecting the VHD your screen should look like the following then click Next. Verify the settings you made are correct. If not, you can go back and make any changes. When everything looks correct click Finish. Setup XP Mode Now, in VirtualBox, click start to run XP Mode. The Windows XP in this virtual drive is not fully setup yet, so you will have to go through the setup process.   If you didn’t uncheck the “Read-only” box in the VHD properties before, you may see the following error.  If you see it, go back and check the file to makes sure it is not read-only. When you click in the virtual machine, it will capture your mouse by default.  Simply press the right Ctrl key to release your mouse so you can go back to using Windows 7.  This will only be the case during the setup process; after the Guest Additions are installed, the mouse will seamlessly move between operating systems. Now, accept the license agreement in XP.   Choose your correct locale and keyboard settings. Enter a name for your virtual XP, and an administrative password. Check the date, time, and time zone settings, and adjust them if they are incorrect.  The time and date are usually correct, but the time zone often has to be corrected. XP will now automatically finish setting up your virtual machine, and then will automatically reboot. After rebooting, select your automatic update settings. You may see a prompt to check for drivers; simply press cancel, as all the drivers we need will be installed later with the Guest Additions. Your last settings will be finalized, and finally you will see your XP desktop in VirtualBox. Please note that XP Mode may not remain activated after importing it into VirtualBox. When you activate it, use the key that is located at C:\Program Files\Windows XP Mode\key.txt.  Note: During our tests we weren’t able to get the activation to go through. We are looking into the issue and will have a revised article showing the correct way to get XP Mode in VirutalBox working correctly soon.    Now we have one final thing to install – the VirtualBox Guest Additions.  In the VirtualBox window, click “Devices” and then select “Install Guest Additions”. This should automatically launch in XP; if it doesn’t, click Start, then My Computer, and finally double-click on the CD drive which should say VirtualBox Guest Additions. Simply install with the normal presets. You can select to install an experimental 3D graphics driver if you wish to try to run games in XP in VirtualBox; however, do note that this is not fully supported and is currently a test feature. You may see a prompt informing you that the drivers have not passed Logo testing; simply press “Continue Anyway” to proceed with the installation.   When installation has completed, you will be required to reboot your virtual machine. Now, you can move your mouse directly from Windows XP to Windows 7 without pressing Ctrl. Integrating with Windows 7 Once your virtual machine is rebooted, you can integrate it with your Windows 7 desktop.  In the VirtualBox window, click Machine and then select “Seamless Mode”.   In Seamless mode you’ll have the XP Start menu and taskbar sit on top of your Windows 7 Start and Taskbar. Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. Another view of everything running seamlessly together on the same Windows 7 desktop. Hover the pointer over the XP taskbar to pull up the Virtual Box menu items. You can exit out of Seamless Mode from the VirtualBox menu or using “Ctrl+L”. Then you go back to having it run separately on your desktop again. Conclusion Running XP Mode in a Virtual Machine is a great way to experience the feature on computers without Hardware Virtualization capabilities. If you prefer VMware Player, then you’ll want to check out our articles on how to run XP Mode on Windows 7 machines without Hardware Virtualization, and how to create an XP Mode for Windows 7 Home Premium and Vista. Download VirtualBox Download XP Mode Similar Articles Productive Geek Tips Install XP Mode with VirtualBox Using the VMLite PluginUsing Windows 7 or Vista Compatibility ModeMake Safari Stop Crashing Every 20 Seconds on Windows VistaForce Windows 7 / Vista to Boot Into Safe Mode Without Using the F8 KeyHow To Run Chrome OS in VirtualBox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Opening Skype, Opera, OpenOffice logs me off

    - by anjanesh
    Whats common among Skype, Opera, OpenOffice in Ubuntu ? Whenever I open these applications I get logged off and shows back me the login screen. This started happening since the 10.10 upgrade. Forgot to mention : Yes, its x64.Each time I open these applications, the UI shows and then crashes. I started each app & logged the last few lines of /var/log/syslog after each crash. Looks like something to do with sound drivers ? Opera :Jan 8 09:33:20 al-ubuntu pulseaudio[11532]: pid.c: Daemon already running. Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: snd_pcm_avail_delay() returned strange values: delay 0 is less than avail 8. Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers. Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: snd_pcm_dump(): Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: Soft volume PCM Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: Control: PCM Playback Volume Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: min_dB: -51 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: max_dB: 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: resolution: 256 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: Its setup is: Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: stream : CAPTURE Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: access : MMAP_INTERLEAVED Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: format : S16_LE Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: subformat : STD Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: channels : 2 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: rate : 44100 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: exact rate : 44100 (44100/1) Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: msbits : 16 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: buffer_size : 88192 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_size : 44096 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_time : 999909 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: tstamp_mode : ENABLE Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_step : 1 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: avail_min : 87310 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_event : 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: start_threshold : -1 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: stop_threshold : 6205960286516543488 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: silence_threshold: 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: silence_size : 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: boundary : 6205960286516543488 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: Its setup is: Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: stream : CAPTURE Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: access : MMAP_INTERLEAVED Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: format : S16_LE Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: subformat : STD Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: channels : 2 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: rate : 44100 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: exact rate : 44100 (44100/1) Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: msbits : 16 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: buffer_size : 88192 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_size : 44096 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_time : 999909 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: tstamp_mode : ENABLE Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_step : 1 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: avail_min : 87310 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_event : 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: start_threshold : -1 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: stop_threshold : 6205960286516543488 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: silence_threshold: 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: silence_size : 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: boundary : 6205960286516543488 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: appl_ptr : 87320 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: hw_ptr : 87320 Jan 8 09:33:22 al-ubuntu kernel: [ 4962.078306] opera[11036]: segfault at 261 ip 0000000000000261 sp 00007fffed7cd9a8 error 14 in opera[400000+122b000] anjanesh@al-ubuntu:~$ SkypeJan 8 09:40:21 al-ubuntu pulseaudio[12602]: pid.c: Daemon already running. Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: snd_pcm_avail_delay() returned strange values: delay 0 is less than avail 8. Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers. Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: snd_pcm_dump(): Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: Soft volume PCM Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: Control: PCM Playback Volume Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: min_dB: -51 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: max_dB: 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: resolution: 256 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: Its setup is: Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: stream : CAPTURE Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: access : MMAP_INTERLEAVED Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: format : S16_LE Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: subformat : STD Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: channels : 2 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: rate : 44100 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: exact rate : 44100 (44100/1) Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: msbits : 16 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: buffer_size : 88192 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_size : 44096 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_time : 999909 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: tstamp_mode : ENABLE Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_step : 1 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: avail_min : 87310 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_event : 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: start_threshold : -1 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: stop_threshold : 6205960286516543488 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: silence_threshold: 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: silence_size : 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: boundary : 6205960286516543488 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: Its setup is: Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: stream : CAPTURE Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: access : MMAP_INTERLEAVED Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: format : S16_LE Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: subformat : STD Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: channels : 2 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: rate : 44100 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: exact rate : 44100 (44100/1) Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: msbits : 16 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: buffer_size : 88192 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_size : 44096 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_time : 999909 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: tstamp_mode : ENABLE Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_step : 1 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: avail_min : 87310 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_event : 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: start_threshold : -1 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: stop_threshold : 6205960286516543488 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: silence_threshold: 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: silence_size : 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: boundary : 6205960286516543488 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: appl_ptr : 87312 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: hw_ptr : 87312 anjanesh@al-ubuntu:~$ Open OfficeJan 8 09:43:46 al-ubuntu pulseaudio[13157]: pid.c: Daemon already running. Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: snd_pcm_avail_delay() returned strange values: delay 0 is less than avail 16. Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers. Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: snd_pcm_dump(): Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: Soft volume PCM Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: Control: PCM Playback Volume Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: min_dB: -51 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: max_dB: 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: resolution: 256 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: Its setup is: Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: stream : CAPTURE Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: access : MMAP_INTERLEAVED Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: format : S16_LE Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: subformat : STD Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: channels : 2 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: rate : 44100 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: exact rate : 44100 (44100/1) Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: msbits : 16 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: buffer_size : 88192 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_size : 44096 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_time : 999909 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: tstamp_mode : ENABLE Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_step : 1 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: avail_min : 87310 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_event : 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: start_threshold : -1 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: stop_threshold : 6205960286516543488 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: silence_threshold: 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: silence_size : 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: boundary : 6205960286516543488 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: Its setup is: Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: stream : CAPTURE Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: access : MMAP_INTERLEAVED Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: format : S16_LE Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: subformat : STD Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: channels : 2 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: rate : 44100 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: exact rate : 44100 (44100/1) Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: msbits : 16 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: buffer_size : 88192 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_size : 44096 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_time : 999909 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: tstamp_mode : ENABLE Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_step : 1 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: avail_min : 87310 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_event : 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: start_threshold : -1 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: stop_threshold : 6205960286516543488 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: silence_threshold: 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: silence_size : 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: boundary : 6205960286516543488 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: appl_ptr : 87320 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: hw_ptr : 87320 anjanesh@al-ubuntu:~$

    Read the article

  • Windows 2008 R2 DHCP server not responding to DHCP discover

    - by MartinSteel
    I've got two Windows 2008 Enterprise R2 servers both running DNS and DHCP called cod & lobster. DHCP is setup using the split scope option introduced with 2008 R2, whereby both servers should respond with the first response providing the lease. Setup is as follows: Cod - IP: 192.168.0.231 - Pool: 192.168.0.101 - 192.168.0.179, exclusion for 160-179. - Response Delay: 0ms - Authorised in Active Directory (Re-authorised to confirm) - Windows firewall disabled while testing Lobster - IP: 192.168.0.232 - Pool: 192.168.0.101 - 192.168.0.179, exclusion for 101-159. - Response Delay: 1000ms - Authorised in Active Directory All DHCP leases to clients are currently being issues by Lobster rather than Cod. Packet captures with Wireshark show the following (all to broadcast address): Client - DHCP Discover Lobster - DHCP Offer (after 1s delay) Client - DHCP Request Lobster - DHCP Ack Client - DHCP Inform From my setup with two servers I'd expect to see a DHCP Offer coming from Cod almost immediately after the DHCP Discover. Does anybody have any idea what would prevent the DHCP Server responding to the discover?

    Read the article

  • New Book From Luís Abreu: ASP.NET 4.0 – The Complete Course (Portuguese)

    - by Paulo Morgado
    Thsi book, with several practical examples, presents how to build web applications using ASP.NET 4.0. Starts by introducing the framework to build pages and controls and gradually introduces all the new features available. More compact that its previous versions  (part of the content was moved to FCA’s site in the form of apendices), this new book gives emphasis to to the new features in ASP.NET 4.0 and targets both developers new to ASP.NET and developers moving from previous versions of ASP.NET. This time there’s good new for Brazilian readers. The book will be distributed in Brazil by: Zamboni Comércio de Livros Ltda. Av.Parada Pinto, 1476 São Paulo – SP Telf. / Fax: +55 11 2233-2333 E-mail: [email protected] Our book (LINQ Com C# (Portuguese)) isn’t still distributed in Brazil, but, if you want it, you can always try that distributer.

    Read the article

  • HAProxy not passing SSL traffic in TCP mode (unknown protocol)

    - by David
    Hi, I've got a HAProxy LB solution setup and working correctly. All HTTP traffic on port 80 is being passed through succesfully. I'm now trying to get SSL traffic to work (in TCP mode and on just one server for now) however I keep getting the following error when testing via openssl: 26396:error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol:s23_clnt.c:588: However, when I try the same test (openssl s_client -connect) on the web servers IP address and hostname, everything seems to look OK. I can setup a hosts record locally and confirm that the browsers are picking up the SSL certificate succesfully for the domain. I guess this has led me to the conclusion that there is a problem at the HAProxy setup I have, so would really appreciate some advice here. frontend https-c-in bind 178.79.xxx.xxx:443 mode tcp default_backend c-https backend c-https balance source option ssl-hello-chk option httpclose server c-web-01 192.168.xxx.xxx:443 check inter 2000 rise 2 fall 5

    Read the article

  • Oracle Fusion Applications: Changing the Game

    - by kellsey.ruppel(at)oracle.com
    Originally posted in the Oracle Profit Magazine, November 2010 Edition. When the order processing system red-flags a customer's credit status, the IT department doesn't get the customer's call. When a supplier misses a delivery date for a key automotive assembly, it's not the CIO who has to answer for the error. Knowledge workers (known in IT circles as "users") are on the front lines when an exception occurs in an established business process. They're also the ones who study sales trends to decide when to open a new store in an up-and-coming neighborhood, which products are most profitable, how employee skill sets are evolving, and which suppliers are most efficient. In short, knowledge workers are masters of business as unusual. Traditional enterprise resource planning (ERP) systems and other familiar enterprise applications excel at automating, managing, and executing standard business processes. These programs shine when everything goes as planned. Life gets even trickier when a traditional application needs to be extended with a new service or an extra step is added to a business process when new products are brought to market, divisions are merged, or companies are acquired. Monolithic applications often need the IT department to step in and make the necessary adjustments--incurring additional costs and delays. Until now. When Oracle unveiled the much-anticipated family of Oracle Fusion Applications at Oracle OpenWorld in September 2010, knowledge workers in particular had a lot to cheer about. Business users will soon have ready access to analytical information and collaboration tools in the context of what they are working on, so they can make better decisions when problems or opportunities arise. Additionally, the Oracle Fusion Applications platform will make it easy for business users to tweak processes, create new capabilities, and find information, often without the need for IT department assistance and while still following company guidelines. And IT leaders will be happy to hear about new deployment options, guided implementation and setup tools, and cost-saving management capabilities. Just as important, the underlying technologies in Oracle Fusion Applications will allow organizations to choose among their existing investments and next-generation enterprise applications so they can introduce innovations at a pace that makes the most business and financial sense. "Oracle Fusion Applications are architected so you don't have to do rip and replace," says Jim Hayes, managing director of the consulting firm Accenture. "That's very important for creating a business case that will get through the steering committee and be approved by the board. It shows you can drive value and make a difference in the near term." For these and other reasons, analysts and early adopters are calling Oracle Fusion Applications a game changer for enterprise customers. The differences become apparent in three key areas: the way we innovate, work, and adopt technology. Game Changer #1: New Standard for InnovationChange is a constant challenge for most businesses, whether the catalysts are market dynamics, new competition, or the ever-expanding regulatory environment. And, in an ongoing effort to differentiate, business leaders are constantly looking for new ways to do business, serve constituents, and bring new products and services to market. In addition, companies face significant costs to keep their applications up-to-date. For example, when a company adds new suppliers to a procurement system, the IT shop typically has to invest time, effort, and even consulting fees for custom integrations that allow various ERP systems to communicate with each other. Oracle Fusion Applications were built on Web services and a modular SOA foundation to ease customizations and integration activities among all applications--whether from Oracle or another vendor. Interfaces and updates written in ubiquitous Java, rather than a proprietary coding language, allow organizations to tap into existing in-house technical skills rather than seek expensive outside specialists. And with SOA, organizations can extend a feature set or integrate with other SOA environments by combining Web services such as "look up customer" into a new business process managed by the BPEL orchestration engine. Flexibility like this has long-term implications. "Because users capture these changes at a higher metadata layer, not in the application's code, changes and additions are protected even as new versions of Oracle Fusion Applications are released," says Steve Miranda, senior vice president of applications development at Oracle. "This is a much more sustainable approach because you don't incur costly customizations that prevent upgrades and other innovations." And changes are easier to make: if one change is made in the metadata, that change is automatically reflected throughout the application interface, business intelligence, business process, and business logic. Game Changer #2: New Standard for WorkBoosting productivity comes down to doing the basics right: running business processes more efficiently and managing exceptions more effectively, so users can accomplish more in the course of a day or spend more quality time with the most profitable customers. The fastest way to improve process efficiency is to reduce the number of steps it takes to execute common tasks, such as ordering office equipment from an internal procurement system. Oracle Fusion Applications will deliver a complete role-based user experience with business intelligence and collaboration capabilities provided in the context of the work at hand. "We created every Oracle Fusion Applications screen by asking 'What does the user need to know?' 'What does he or she need to do?' and 'Who do they need to work with to get the job done?'" Miranda explains. So when the sales department heads need new laptops, the self-service procurement screen will not only display a list of approved vendors and configurations, but also a running list of reviews by coworkers who recently purchased the various models. Embedded intelligence may also display prevailing delivery lead times based on actual order histories, not the generic shipping dates vendors may quote. The pervasive business intelligence serves many other business activities across all areas of the enterprise. For example, a manager considering whether to promote a direct report can see the person's employee profile, with a salary history, appraisal summaries, and a rundown of skills and training. This approach to business intelligence also has implications for supply chain management. "One of the challenges at Ingersoll Rand is lack of visibility in our supply chain," says Mike Macrie, global director of enterprise applications for global industrial firm Ingersoll Rand. "Oracle Fusion Applications are going to provide the embedded intelligence to give us that visibility and give us the ability to analyze those orders at any point in our supply chain." Oracle Fusion Applications will also create a "role-based user experience" that displays a work list of events that need attention, based on user job function. Role awareness guides users with daily lists of action items and exceptions. So a credit manager may see seven invoices with discounts that are about to expire or 12 suppliers that have been put on hold because credit memos are awaiting approval. Individualization extends to the search capabilities of Oracle Fusion Applications. The platform uses Web-style search screens powered by an Oracle enterprise search engine, with a security framework that filters search results so individuals will only see the internal information they're authorized to access. A further aid to productivity is Oracle Fusion Applications' integration with Web 2.0 collaboration and social networking resources for business environments. Hover-over text will reveal relevant contact information whenever the name of a person appears in an Oracle Fusion Application. Users can connect via an online chat, phone call, or instant message without leaving the main application, reducing the time required for an accounts payable staffer to resolve a mismatch between an invoiced charge and the service record, for example. Addresses of suppliers, customers, or partners will also initiate hover-over text to show contact details and Web-based maps. Finally, Oracle Fusion Applications will promote a new way of working with purpose-driven communities that can bring new efficiencies to everything from cultivating sales leads to managing new projects. As soon as a lead or project materializes, the applications will automatically gather relevant participants into an online community that shares member contact information, schedules, discussion forums, and Wiki pages. "Oracle Fusion Applications will allow us to take it to the next level with embedded Web 2.0 tools and the embedded analytics," says Steve Printz, CIO and vice president, supply chain management, at window-and-door manufacturer Pella. "[This] allows those employees today who are processing transactions to really contribute to the success of the company and become decision-makers." Game Changer #3: New Standard for Technology AdoptionAs IT becomes a dominant component of how businesses run and compete, organizations need to lower the cost of implementing applications and introducing new application features. In the past, rolling out new code often required creating a test bed system, moving beta code to a separate system for user feedback, and--once all the revisions were made--moving version one of the software onto production systems, where business users could finally get the needed new features. Oracle Fusion Applications will use a dedicated setup manager application to streamline this process. First, the setup manager will help scope out the project, querying users about their requirements. "From those questions and answers we determine the steps and the order of those steps that will enable that task," Miranda says. Next, system utilities will assign tasks to owners, track completion status, and monitor the overall status of a programming effort. Oracle Fusion Applications can then recommend Web services that allow users to migrate setup choices and steps across all the various deployments of the application. Those setup capabilities automate the migration from test systems to production systems, as well as between different business units that may be using the same application. "The self-service ability of the setup manager helps business users change setups with very little intervention from the IT team," says Ravi Kumar, vice president at IT services company Infosys. "That to me is a big difference from how we've viewed enterprise applications before." For additional flexibility, organizations will be able to adopt Oracle Fusion Applications modules in either of two modes: a single-instance alternative uses one database for all Oracle Fusion Applications, while a "pillar mode" creates separate databases to underpin each application. This means IT departments running any one of Oracle's applications or even third-party applications can plug Oracle Fusion Applications modules into their environment and see additional business value created on top of their existing systems. And Oracle Fusion Applications offer a hybrid approach to deployment. The applications are all software-as-a-service-ready, so customers can choose on-premises, public or private cloud, or a combination of these to suit their business needs. It's that combination of flexibility and a roadmap for the future that may be the biggest game changer of all. "The Oracle Fusion Applications architecture allows us to migrate our company at a pace that's consistent with our business strategy, whereas before we might have had to do it with a massive upgrade," says Macrie of Ingersoll Rand. "We're looking forward to that architecture to really give us more flexibility in how we migrate over time." For More InformationUser Input Key to the Success of Oracle Fusion ApplicationsTransforming Coexistence into Strategic ValueUnder the HoodOracle Fusion ApplicationsOracle Service-Oriented Architecture  

    Read the article

  • Toorcon 15 (2013)

    - by danx
    The Toorcon gang (senior staff): h1kari (founder), nfiltr8, and Geo Introduction to Toorcon 15 (2013) A Tale of One Software Bypass of MS Windows 8 Secure Boot Breaching SSL, One Byte at a Time Running at 99%: Surviving an Application DoS Security Response in the Age of Mass Customized Attacks x86 Rewriting: Defeating RoP and other Shinanighans Clowntown Express: interesting bugs and running a bug bounty program Active Fingerprinting of Encrypted VPNs Making Attacks Go Backwards Mask Your Checksums—The Gorry Details Adventures with weird machines thirty years after "Reflections on Trusting Trust" Introduction to Toorcon 15 (2013) Toorcon 15 is the 15th annual security conference held in San Diego. I've attended about a third of them and blogged about previous conferences I attended here starting in 2003. As always, I've only summarized the talks I attended and interested me enough to write about them. Be aware that I may have misrepresented the speaker's remarks and that they are not my remarks or opinion, or those of my employer, so don't quote me or them. Those seeking further details may contact the speakers directly or use The Google. For some talks, I have a URL for further information. A Tale of One Software Bypass of MS Windows 8 Secure Boot Andrew Furtak and Oleksandr Bazhaniuk Yuri Bulygin, Oleksandr ("Alex") Bazhaniuk, and (not present) Andrew Furtak Yuri and Alex talked about UEFI and Bootkits and bypassing MS Windows 8 Secure Boot, with vendor recommendations. They previously gave this talk at the BlackHat 2013 conference. MS Windows 8 Secure Boot Overview UEFI (Unified Extensible Firmware Interface) is interface between hardware and OS. UEFI is processor and architecture independent. Malware can replace bootloader (bootx64.efi, bootmgfw.efi). Once replaced can modify kernel. Trivial to replace bootloader. Today many legacy bootkits—UEFI replaces them most of them. MS Windows 8 Secure Boot verifies everything you load, either through signatures or hashes. UEFI firmware relies on secure update (with signed update). You would think Secure Boot would rely on ROM (such as used for phones0, but you can't do that for PCs—PCs use writable memory with signatures DXE core verifies the UEFI boat loader(s) OS Loader (winload.efi, winresume.efi) verifies the OS kernel A chain of trust is established with a root key (Platform Key, PK), which is a cert belonging to the platform vendor. Key Exchange Keys (KEKs) verify an "authorized" database (db), and "forbidden" database (dbx). X.509 certs with SHA-1/SHA-256 hashes. Keys are stored in non-volatile (NV) flash-based NVRAM. Boot Services (BS) allow adding/deleting keys (can't be accessed once OS starts—which uses Run-Time (RT)). Root cert uses RSA-2048 public keys and PKCS#7 format signatures. SecureBoot — enable disable image signature checks SetupMode — update keys, self-signed keys, and secure boot variables CustomMode — allows updating keys Secure Boot policy settings are: always execute, never execute, allow execute on security violation, defer execute on security violation, deny execute on security violation, query user on security violation Attacking MS Windows 8 Secure Boot Secure Boot does NOT protect from physical access. Can disable from console. Each BIOS vendor implements Secure Boot differently. There are several platform and BIOS vendors. It becomes a "zoo" of implementations—which can be taken advantage of. Secure Boot is secure only when all vendors implement it correctly. Allow only UEFI firmware signed updates protect UEFI firmware from direct modification in flash memory protect FW update components program SPI controller securely protect secure boot policy settings in nvram protect runtime api disable compatibility support module which allows unsigned legacy Can corrupt the Platform Key (PK) EFI root certificate variable in SPI flash. If PK is not found, FW enters setup mode wich secure boot turned off. Can also exploit TPM in a similar manner. One is not supposed to be able to directly modify the PK in SPI flash from the OS though. But they found a bug that they can exploit from User Mode (undisclosed) and demoed the exploit. It loaded and ran their own bootkit. The exploit requires a reboot. Multiple vendors are vulnerable. They will disclose this exploit to vendors in the future. Recommendations: allow only signed updates protect UEFI fw in ROM protect EFI variable store in ROM Breaching SSL, One Byte at a Time Yoel Gluck and Angelo Prado Angelo Prado and Yoel Gluck, Salesforce.com CRIME is software that performs a "compression oracle attack." This is possible because the SSL protocol doesn't hide length, and because SSL compresses the header. CRIME requests with every possible character and measures the ciphertext length. Look for the plaintext which compresses the most and looks for the cookie one byte-at-a-time. SSL Compression uses LZ77 to reduce redundancy. Huffman coding replaces common byte sequences with shorter codes. US CERT thinks the SSL compression problem is fixed, but it isn't. They convinced CERT that it wasn't fixed and they issued a CVE. BREACH, breachattrack.com BREACH exploits the SSL response body (Accept-Encoding response, Content-Encoding). It takes advantage of the fact that the response is not compressed. BREACH uses gzip and needs fairly "stable" pages that are static for ~30 seconds. It needs attacker-supplied content (say from a web form or added to a URL parameter). BREACH listens to a session's requests and responses, then inserts extra requests and responses. Eventually, BREACH guesses a session's secret key. Can use compression to guess contents one byte at-a-time. For example, "Supersecret SupersecreX" (a wrong guess) compresses 10 bytes, and "Supersecret Supersecret" (a correct guess) compresses 11 bytes, so it can find each character by guessing every character. To start the guess, BREACH needs at least three known initial characters in the response sequence. Compression length then "leaks" information. Some roadblocks include no winners (all guesses wrong) or too many winners (multiple possibilities that compress the same). The solutions include: lookahead (guess 2 or 3 characters at-a-time instead of 1 character). Expensive rollback to last known conflict check compression ratio can brute-force first 3 "bootstrap" characters, if needed (expensive) block ciphers hide exact plain text length. Solution is to align response in advance to block size Mitigations length: use variable padding secrets: dynamic CSRF tokens per request secret: change over time separate secret to input-less servlets Future work eiter understand DEFLATE/GZIP HTTPS extensions Running at 99%: Surviving an Application DoS Ryan Huber Ryan Huber, Risk I/O Ryan first discussed various ways to do a denial of service (DoS) attack against web services. One usual method is to find a slow web page and do several wgets. Or download large files. Apache is not well suited at handling a large number of connections, but one can put something in front of it Can use Apache alternatives, such as nginx How to identify malicious hosts short, sudden web requests user-agent is obvious (curl, python) same url requested repeatedly no web page referer (not normal) hidden links. hide a link and see if a bot gets it restricted access if not your geo IP (unless the website is global) missing common headers in request regular timing first seen IP at beginning of attack count requests per hosts (usually a very large number) Use of captcha can mitigate attacks, but you'll lose a lot of genuine users. Bouncer, goo.gl/c2vyEc and www.github.com/rawdigits/Bouncer Bouncer is software written by Ryan in netflow. Bouncer has a small, unobtrusive footprint and detects DoS attempts. It closes blacklisted sockets immediately (not nice about it, no proper close connection). Aggregator collects requests and controls your web proxies. Need NTP on the front end web servers for clean data for use by bouncer. Bouncer is also useful for a popularity storm ("Slashdotting") and scraper storms. Future features: gzip collection data, documentation, consumer library, multitask, logging destroyed connections. Takeaways: DoS mitigation is easier with a complete picture Bouncer designed to make it easier to detect and defend DoS—not a complete cure Security Response in the Age of Mass Customized Attacks Peleus Uhley and Karthik Raman Peleus Uhley and Karthik Raman, Adobe ASSET, blogs.adobe.com/asset/ Peleus and Karthik talked about response to mass-customized exploits. Attackers behave much like a business. "Mass customization" refers to concept discussed in the book Future Perfect by Stan Davis of Harvard Business School. Mass customization is differentiating a product for an individual customer, but at a mass production price. For example, the same individual with a debit card receives basically the same customized ATM experience around the world. Or designing your own PC from commodity parts. Exploit kits are another example of mass customization. The kits support multiple browsers and plugins, allows new modules. Exploit kits are cheap and customizable. Organized gangs use exploit kits. A group at Berkeley looked at 77,000 malicious websites (Grier et al., "Manufacturing Compromise: The Emergence of Exploit-as-a-Service", 2012). They found 10,000 distinct binaries among them, but derived from only a dozen or so exploit kits. Characteristics of Mass Malware: potent, resilient, relatively low cost Technical characteristics: multiple OS, multipe payloads, multiple scenarios, multiple languages, obfuscation Response time for 0-day exploits has gone down from ~40 days 5 years ago to about ~10 days now. So the drive with malware is towards mass customized exploits, to avoid detection There's plenty of evicence that exploit development has Project Manager bureaucracy. They infer from the malware edicts to: support all versions of reader support all versions of windows support all versions of flash support all browsers write large complex, difficult to main code (8750 lines of JavaScript for example Exploits have "loose coupling" of multipe versions of software (adobe), OS, and browser. This allows specific attacks against specific versions of multiple pieces of software. Also allows exploits of more obscure software/OS/browsers and obscure versions. Gave examples of exploits that exploited 2, 3, 6, or 14 separate bugs. However, these complete exploits are more likely to be buggy or fragile in themselves and easier to defeat. Future research includes normalizing malware and Javascript. Conclusion: The coming trend is that mass-malware with mass zero-day attacks will result in mass customization of attacks. x86 Rewriting: Defeating RoP and other Shinanighans Richard Wartell Richard Wartell The attack vector we are addressing here is: First some malware causes a buffer overflow. The malware has no program access, but input access and buffer overflow code onto stack Later the stack became non-executable. The workaround malware used was to write a bogus return address to the stack jumping to malware Later came ASLR (Address Space Layout Randomization) to randomize memory layout and make addresses non-deterministic. The workaround malware used was to jump t existing code segments in the program that can be used in bad ways "RoP" is Return-oriented Programming attacks. RoP attacks use your own code and write return address on stack to (existing) expoitable code found in program ("gadgets"). Pinkie Pie was paid $60K last year for a RoP attack. One solution is using anti-RoP compilers that compile source code with NO return instructions. ASLR does not randomize address space, just "gadgets". IPR/ILR ("Instruction Location Randomization") randomizes each instruction with a virtual machine. Richard's goal was to randomize a binary with no source code access. He created "STIR" (Self-Transofrming Instruction Relocation). STIR disassembles binary and operates on "basic blocks" of code. The STIR disassembler is conservative in what to disassemble. Each basic block is moved to a random location in memory. Next, STIR writes new code sections with copies of "basic blocks" of code in randomized locations. The old code is copied and rewritten with jumps to new code. the original code sections in the file is marked non-executible. STIR has better entropy than ASLR in location of code. Makes brute force attacks much harder. STIR runs on MS Windows (PEM) and Linux (ELF). It eliminated 99.96% or more "gadgets" (i.e., moved the address). Overhead usually 5-10% on MS Windows, about 1.5-4% on Linux (but some code actually runs faster!). The unique thing about STIR is it requires no source access and the modified binary fully works! Current work is to rewrite code to enforce security policies. For example, don't create a *.{exe,msi,bat} file. Or don't connect to the network after reading from the disk. Clowntown Express: interesting bugs and running a bug bounty program Collin Greene Collin Greene, Facebook Collin talked about Facebook's bug bounty program. Background at FB: FB has good security frameworks, such as security teams, external audits, and cc'ing on diffs. But there's lots of "deep, dark, forgotten" parts of legacy FB code. Collin gave several examples of bountied bugs. Some bounty submissions were on software purchased from a third-party (but bounty claimers don't know and don't care). We use security questions, as does everyone else, but they are basically insecure (often easily discoverable). Collin didn't expect many bugs from the bounty program, but they ended getting 20+ good bugs in first 24 hours and good submissions continue to come in. Bug bounties bring people in with different perspectives, and are paid only for success. Bug bounty is a better use of a fixed amount of time and money versus just code review or static code analysis. The Bounty program started July 2011 and paid out $1.5 million to date. 14% of the submissions have been high priority problems that needed to be fixed immediately. The best bugs come from a small % of submitters (as with everything else)—the top paid submitters are paid 6 figures a year. Spammers like to backstab competitors. The youngest sumitter was 13. Some submitters have been hired. Bug bounties also allows to see bugs that were missed by tools or reviews, allowing improvement in the process. Bug bounties might not work for traditional software companies where the product has release cycle or is not on Internet. Active Fingerprinting of Encrypted VPNs Anna Shubina Anna Shubina, Dartmouth Institute for Security, Technology, and Society (I missed the start of her talk because another track went overtime. But I have the DVD of the talk, so I'll expand later) IPsec leaves fingerprints. Using netcat, one can easily visually distinguish various crypto chaining modes just from packet timing on a chart (example, DES-CBC versus AES-CBC) One can tell a lot about VPNs just from ping roundtrips (such as what router is used) Delayed packets are not informative about a network, especially if far away from the network More needed to explore about how TCP works in real life with respect to timing Making Attacks Go Backwards Fuzzynop FuzzyNop, Mandiant This talk is not about threat attribution (finding who), product solutions, politics, or sales pitches. But who are making these malware threats? It's not a single person or group—they have diverse skill levels. There's a lot of fat-fingered fumblers out there. Always look for low-hanging fruit first: "hiding" malware in the temp, recycle, or root directories creation of unnamed scheduled tasks obvious names of files and syscalls ("ClearEventLog") uncleared event logs. Clearing event log in itself, and time of clearing, is a red flag and good first clue to look for on a suspect system Reverse engineering is hard. Disassembler use takes practice and skill. A popular tool is IDA Pro, but it takes multiple interactive iterations to get a clean disassembly. Key loggers are used a lot in targeted attacks. They are typically custom code or built in a backdoor. A big tip-off is that non-printable characters need to be printed out (such as "[Ctrl]" "[RightShift]") or time stamp printf strings. Look for these in files. Presence is not proof they are used. Absence is not proof they are not used. Java exploits. Can parse jar file with idxparser.py and decomile Java file. Java typially used to target tech companies. Backdoors are the main persistence mechanism (provided externally) for malware. Also malware typically needs command and control. Application of Artificial Intelligence in Ad-Hoc Static Code Analysis John Ashaman John Ashaman, Security Innovation Initially John tried to analyze open source files with open source static analysis tools, but these showed thousands of false positives. Also tried using grep, but tis fails to find anything even mildly complex. So next John decided to write his own tool. His approach was to first generate a call graph then analyze the graph. However, the problem is that making a call graph is really hard. For example, one problem is "evil" coding techniques, such as passing function pointer. First the tool generated an Abstract Syntax Tree (AST) with the nodes created from method declarations and edges created from method use. Then the tool generated a control flow graph with the goal to find a path through the AST (a maze) from source to sink. The algorithm is to look at adjacent nodes to see if any are "scary" (a vulnerability), using heuristics for search order. The tool, called "Scat" (Static Code Analysis Tool), currently looks for C# vulnerabilities and some simple PHP. Later, he plans to add more PHP, then JSP and Java. For more information see his posts in Security Innovation blog and NRefactory on GitHub. Mask Your Checksums—The Gorry Details Eric (XlogicX) Davisson Eric (XlogicX) Davisson Sometimes in emailing or posting TCP/IP packets to analyze problems, you may want to mask the IP address. But to do this correctly, you need to mask the checksum too, or you'll leak information about the IP. Problem reports found in stackoverflow.com, sans.org, and pastebin.org are usually not masked, but a few companies do care. If only the IP is masked, the IP may be guessed from checksum (that is, it leaks data). Other parts of packet may leak more data about the IP. TCP and IP checksums both refer to the same data, so can get more bits of information out of using both checksums than just using one checksum. Also, one can usually determine the OS from the TTL field and ports in a packet header. If we get hundreds of possible results (16x each masked nibble that is unknown), one can do other things to narrow the results, such as look at packet contents for domain or geo information. With hundreds of results, can import as CSV format into a spreadsheet. Can corelate with geo data and see where each possibility is located. Eric then demoed a real email report with a masked IP packet attached. Was able to find the exact IP address, given the geo and university of the sender. Point is if you're going to mask a packet, do it right. Eric wouldn't usually bother, but do it correctly if at all, to not create a false impression of security. Adventures with weird machines thirty years after "Reflections on Trusting Trust" Sergey Bratus Sergey Bratus, Dartmouth College (and Julian Bangert and Rebecca Shapiro, not present) "Reflections on Trusting Trust" refers to Ken Thompson's classic 1984 paper. "You can't trust code that you did not totally create yourself." There's invisible links in the chain-of-trust, such as "well-installed microcode bugs" or in the compiler, and other planted bugs. Thompson showed how a compiler can introduce and propagate bugs in unmodified source. But suppose if there's no bugs and you trust the author, can you trust the code? Hell No! There's too many factors—it's Babylonian in nature. Why not? Well, Input is not well-defined/recognized (code's assumptions about "checked" input will be violated (bug/vunerabiliy). For example, HTML is recursive, but Regex checking is not recursive. Input well-formed but so complex there's no telling what it does For example, ELF file parsing is complex and has multiple ways of parsing. Input is seen differently by different pieces of program or toolchain Any Input is a program input executes on input handlers (drives state changes & transitions) only a well-defined execution model can be trusted (regex/DFA, PDA, CFG) Input handler either is a "recognizer" for the inputs as a well-defined language (see langsec.org) or it's a "virtual machine" for inputs to drive into pwn-age ELF ABI (UNIX/Linux executible file format) case study. Problems can arise from these steps (without planting bugs): compiler linker loader ld.so/rtld relocator DWARF (debugger info) exceptions The problem is you can't really automatically analyze code (it's the "halting problem" and undecidable). Only solution is to freeze code and sign it. But you can't freeze everything! Can't freeze ASLR or loading—must have tables and metadata. Any sufficiently complex input data is the same as VM byte code Example, ELF relocation entries + dynamic symbols == a Turing Complete Machine (TM). @bxsays created a Turing machine in Linux from relocation data (not code) in an ELF file. For more information, see Rebecca "bx" Shapiro's presentation from last year's Toorcon, "Programming Weird Machines with ELF Metadata" @bxsays did same thing with Mach-O bytecode Or a DWARF exception handling data .eh_frame + glibc == Turning Machine X86 MMU (IDT, GDT, TSS): used address translation to create a Turning Machine. Page handler reads and writes (on page fault) memory. Uses a page table, which can be used as Turning Machine byte code. Example on Github using this TM that will fly a glider across the screen Next Sergey talked about "Parser Differentials". That having one input format, but two parsers, will create confusion and opportunity for exploitation. For example, CSRs are parsed during creation by cert requestor and again by another parser at the CA. Another example is ELF—several parsers in OS tool chain, which are all different. Can have two different Program Headers (PHDRs) because ld.so parses multiple PHDRs. The second PHDR can completely transform the executable. This is described in paper in the first issue of International Journal of PoC. Conclusions trusting computers not only about bugs! Bugs are part of a problem, but no by far all of it complex data formats means bugs no "chain of trust" in Babylon! (that is, with parser differentials) we need to squeeze complexity out of data until data stops being "code equivalent" Further information See and langsec.org. USENIX WOOT 2013 (Workshop on Offensive Technologies) for "weird machines" papers and videos.

    Read the article

  • The Best Tips and Tricks for Getting the Most out of Internet Explorer 10

    - by Lori Kaufman
    Now that Windows 8 is available, you might have started playing around with Internet Explorer 10. It comes in two different versions: the minimalist Modern UI/Metro version accessed from the Start screen and the traditional, full-featured Desktop version accessed from the Taskbar. In this article, we provide some useful tips and tricks to help you get to know both versions of Internet Explorer, especially the new Modern UI/Metro version. HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

    Read the article

  • 2 way SSL between SOA and OSB

    - by Johnny Shum
    If you have a need to use 2 way SSL between SOA composite and external partner links, you can follow these steps. Create the identity keystores, trust keystores, and server certificates. Setup keystores and SSL on WebLogic Setup server to use 2 way SSL Configure your SOA composite's partner link to use 2 way SSL Configure SOA engine two ways SSL In this case,  I use SOA and OSB for the test.  I started with a separate OSB and SOA domains.  I deployed two soap based proxies on OSB and two composites on SOA.  In SOA, one composite invokes a OSB proxy service, the other is invoked by the OSB.  Similarly,  in OSB,  one proxy invokes a SOA composite and the other is invoked by SOA. 1. Create the identity keystores, trust keystores and the server certificates Since this is a development environment, I use JDK's keytool to create the stores and use self signing certificate.  For production environment, you should use certificates from a trusted certificate authority like Verisign.    I created a script below to show what is needed in this step.  The only requirement is when creating the SOA identity certificate, you MUST use the alias mykey. STOREPASS=welcome1KEYPASS=welcome1# generate identity keystore for soa and osb.  Note: For SOA, you MUST use alias mykeyecho "creating stores"keytool -genkey -alias mykey -keyalg "RSA" -sigalg "SHA1withRSA" -dname "CN=soa, C=US" -keystore soa-default-keystore.jks -storepass $STOREPASS -keypass $KEYPASS keytool -genkey -alias osbkey -keyalg "RSA" -sigalg "SHA1withRSA" -dname "CN=osb, C=US" -keystore osb-default-keystore.jks -storepass $STOREPASS -keypass $KEYPASS# listing keystore contentsecho "listing stores contents"keytool -list -alias mykey -keystore soa-default-keystore.jks -storepass $STOREPASSkeytool -list -alias osbkey -keystore osb-default-keystore.jks -storepass $STOREPASS# exporting certs from storesecho "export certs from  stores"keytool -exportcert -alias mykey -keystore soa-default-keystore.jks -storepass $STOREPASS -file soacert.derkeytool -exportcert -alias osbkey -keystore osb-default-keystore.jks -storepass $STOREPASS -file osbcert.der # import certs to trust storesecho "import certs"keytool -importcert -alias osbkey -keystore soa-trust-keystore.jks -storepass $STOREPASS -file osbcert.der -keypass $KEYPASSkeytool -importcert -alias mykey -keystore osb-trust-keystore.jks -storepass $STOREPASS -file soacert.der  -keypass $KEYPASS SOA suite uses the JDK's SSL implementation for outbound traffic instead of the WebLogic's implementation.  You will need to import the partner's public cert into the trusted keystore used by SOA.  The default trusted keystore for SOA is DemoTrust.jks and it is located in $MW_HOME/wlserver_10.3/server/lib.   (This is set in the startup script -Djavax.net.ssl.trustStore).   If you use your own trusted keystore, then you will need to import it into your own trusted keystore. keytool -importcert -alias osbkey -keystore $MW_HOME/wlserver_10.3/server/lib/DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase  -file osbcert.der -keypass $KEYPASS If you do not perform this step, you will encounter this exception in runtime when SOA invokes OSB service using 2 way SSL Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target  2.  Setup keystores and SSL on WebLogic First, you will need to login to the WebLogic console, navigate to the server's configuration->Keystore's tab.   Change the Keystores type to Custom Identity and Custom Trust and enter the rest of the fields. Then you navigate to the SSL tab, enter the fields in the identity section and expand the Advanced section.  Since I am using self signing cert on my VM enviornment, I disabled Hostname verification.  In real production system, this should not be the case.   I also enabled the option "Use Server Certs", so that the application uses the server cert to initiate https traffic (it is important to enable this in OSB). Last, you enable SSL listening port in the Server's configuration->General tab. 3.  Setup server to use 2 way SSL If you follow the screen shot in previous step, you can see in the Server->Configuration->SSL->Advanced section, there is an option for Two Way Client Cert Behavior,  you should set this to Client Certs Requested and Enforced. Repeat step 2 and 3 done on OSB.  After all these configurations,  you have to restart all the servers. 4.  Configure your SOA composite's partner link to use 2 way SSL You do this by modifying the composite.xml in your project, locate the partner's link reference and add the property oracle.soa.two.way.ssl.enabled.   <reference name="callosb" ui:wsdlLocation="helloword.wsdl">    <interface.wsdl interface="http://www.examples.com/wsdl/HelloService.wsdl#wsdl.interface(Hello_PortType)"/>    <binding.ws port="http://www.examples.com/wsdl/HelloService.wsdl#wsdl.endpoint(Hello_Service/Hello_Port)"                location="helloword.wsdl" soapVersion="1.1">      <property name="weblogic.wsee.wsat.transaction.flowOption"                type="xs:string" many="false">WSDLDriven</property>   <property name="oracle.soa.two.way.ssl.enabled">true</property>    </binding.ws>  </reference> In OSB, you should have checked the HTTPS required flag in the proxy's transport configuration.  After this,  rebuilt the composite jar file and ready to deploy in the EM console later. 5.  Configure SOA engine two ways SSL Oracle SOA Suite uses both Oracle WebLogic Server and Sun Secure Socket Layer (SSL) stacks for two-way SSL configurations. For the inbound web service bindings, Oracle SOA Suite uses the Oracle WebLogic Server infrastructure and, therefore, the Oracle WebLogic Server libraries for SSL.  This is already done by step 2 and 3 in the previous section. For the outbound web service bindings, Oracle SOA Suite uses JRF HttpClient and, therefore, the Sun JDK libraries for SSL.  You do this by configuring the SOA Engine in the Enterprise Manager Console, select soa-infra->SOA Administration->Common Properties Then click at the link at the bottom of the page:  "More SOA Infra Advances Infrastructure Configuration Properties" and then enter the full path of soa identity keystore in the value field of the KeyStoreLocation attribute.  Click Apply and Return then navigate to the domain->security->credential. Here, you provide the password to the keystore.  Note: the alias of the certficate must be mykey as described in step 1, so you only need to provide the password to the identity keystore.   You accomplish this by: Click Create Map In the Map Name field, enter SOA, and click OK Click Create Key Enter the following details where the password is the password for the SOA identity keystore. 6.  Test and Trouble Shooting Once the setup is complete and server restarted, you can deploy the composite in the EM console and test it.  In case of error,  you can read the server log file to determine the cause of the error.  For example, If you have not setup step 5 and test 2 way SSL, you will see this in the log when invoking OSB from BPEL: java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): https://localhost.localdomain:7002/default/helloword ####<Sep 22, 2012 2:07:37 PM CDT> <Error> <oracle.soa.bpel.engine.ws> <rhel55> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0AFDAEF20610F8FD89C5> ............ <11d1def534ea1be0:-4034173:139ef56d9f0:-8000-00000000000002ec> <1348340857956> <BEA-000000> <got FabricInvocationException sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target If you have not enable WebLogic SSL to use server certificate in the console and invoke SOA composite from OSB using two ways SSL, you will see this error: ####<Sep 22, 2012 2:07:37 PM CDT> <Warning> <Security> <rhel55> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <11d1def534ea1be0:-51f5c76a:139ef5e1e1a:-8000-00000000000000e2> <1348340857776> <BEA-090485> <CERTIFICATE_UNKNOWN alert was received from localhost.localdomain - 127.0.0.1. The peer has an unspecified issue with the certificate. SSL debug tracing should be enabled on the peer to determine what the issue is.> ####<Sep 22, 2012 2:07:37 PM CDT> <Warning> <Security> <rhel55> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <11d1def534ea1be0:-51f5c76a:139ef5e1e1a:-8000-00000000000000e4> <1348340857786> <BEA-090485> <CERTIFICATE_UNKNOWN alert was received from localhost.localdomain - 127.0.0.1. The peer has an unspecified issue with the certificate. SSL debug tracing should be enabled on the peer to determine what the issue is.> ####<Sep 22, 2012 2:27:21 PM CDT> <Warning> <Security> <rhel55> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <11d1def534ea1be0:-51f5c76a:139ef5e1e1a:-8000-0000000000000124> <1348342041926> <BEA-090497> <HANDSHAKE_FAILURE alert received from localhost - 127.0.0.1. Check both sides of the SSL configuration for mismatches in supported ciphers, supported protocol versions, trusted CAs, and hostname verification settings.> References http://docs.oracle.com/cd/E23943_01/admin.1111/e10226/soacompapp_secure.htm#CHDCFABB   Section 5.6.4 http://docs.oracle.com/cd/E23943_01/web.1111/e13707/ssl.htm#i1200848

    Read the article

  • Need help with PHP web app bootstrapping error potentially related to Zend [migrated]

    - by Matt Shepherd
    I am trying to get a program called OpenFISMA running on an Ubuntu AMI in AWS. The app is not really coded on the Ubuntu platform, but I am in my comfort zone there, and have tried both CentOS and OpenSUSE (both are sort of "native" for the app) for getting it working with the same or worse results. So, why not just get it working on Ubuntu? Anyway, the app is found here: www.openfisma.org and an install guide is found here: https://openfisma.atlassian.net/wiki/display/030100/Installation+Guide The install guide kind of sucks. It doesn't list dependencies in any coherent way or provide much of any detail (does not even mention Zend once on the entire page) so I've done a lot of work to divine the information I do have. This page provided some dependency inf (though again, Zend is not mentioned once): https://openfisma.atlassian.net/wiki/display/PUBLIC/RPM+Management#RPMManagement-BasicOverviewofRPMPackages Anyway, I got all the way through the install (so far as I could reconstruct it). I am going to the login page for the first time, and there should be some sort of bootstrapping occurring when I load the page. (I am not a programmer so I have no idea what it is doing there.) Anyway, I get a message on the web page that says: "An exception occurred while bootstrapping the application." So, then I go look in /var/www/data/logs/php.log and find this message: [22-Oct-2013 17:29:18 UTC] PHP Fatal error: Uncaught exception 'Zend_Exception' with message 'No entry is registered for key 'Zend_Log'' in /var/www/library/Zend/Registry.php:147 Stack trace: #0 /var/www/public/index.php(188): Zend_Registry::get('Zend_Log') #1 {main} thrown in /var/www/library/Zend/Registry.php on line 147 This occurs every time I load the page. I gather there is an issue related to registering the Zend_Log variable in the Zend registry, but other than that I really have no idea what to do about it. Am I missing a package that it needs, or is this app not coded to register the variables properly? I have no clue. Any help is greatly appreciated. The application file referenced in the log message (index.php) is included below. <?php /** * Copyright (c) 2008 Endeavor Systems, Inc. * * This file is part of OpenFISMA. * * OpenFISMA is free software: you can redistribute it and/or modify it under the terms of the GNU General Public * License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later * version. * * OpenFISMA is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more * details. * * You should have received a copy of the GNU General Public License along with OpenFISMA. If not, see * {@link http://www.gnu.org/licenses/}. */ try { defined('APPLICATION_PATH') || define( 'APPLICATION_PATH', realpath(dirname(__FILE__) . '/../application') ); // Define application environment defined('APPLICATION_ENV') || define( 'APPLICATION_ENV', (getenv('APPLICATION_ENV') ? getenv('APPLICATION_ENV') : 'production') ); set_include_path( APPLICATION_PATH . '/../library/Symfony/Components' . PATH_SEPARATOR . APPLICATION_PATH . '/../library' . PATH_SEPARATOR . get_include_path() ); require_once 'Fisma.php'; require_once 'Zend/Application.php'; $application = new Zend_Application( APPLICATION_ENV, APPLICATION_PATH . '/config/application.ini' ); Fisma::setAppConfig($application->getOptions()); Fisma::initialize(Fisma::RUN_MODE_WEB_APP); $application->bootstrap()->run(); } catch (Zend_Config_Exception $zce) { // A zend config exception indicates that the application may not be installed properly echo '<h1>The application is not installed correctly</h1>'; $zceMsg = $zce->getMessage(); if (stristr($zceMsg, 'parse_ini_file') !== false) { if (stristr($zceMsg, 'application.ini') !== false) { if (stristr($zceMsg, 'No such file or directory') !== false) { echo 'The ' . APPLICATION_PATH . '/config/application.ini file is missing.'; } elseif (stristr($zceMsg, 'Permission denied') !== false) { echo 'The ' . APPLICATION_PATH . '/config/application.ini file does not have the ' . 'appropriate permissions set for the application to read it.'; } else { echo 'An ini-parsing error has occured in ' . APPLICATION_PATH . '/config/application.ini ' . '<br/>Please check this file and make sure everything is setup correctly.'; } } else if (stristr($zceMsg, 'database.ini') !== false) { if (stristr($zceMsg, 'No such file or directory') !== false) { echo 'The ' . APPLICATION_PATH . '/config/database.ini file is missing.<br/>'; echo 'If you find a database.ini.template file in the config directory, edit this file ' . 'appropriately and rename it to database.ini'; } elseif (stristr($zceMsg, 'Permission denied') !== false) { echo 'The ' . APPLICATION_PATH . '/config/database.ini file does not have the appropriate ' . 'permissions set for the application to read it.'; } else { echo 'An ini-parsing error has occured in ' . APPLICATION_PATH . '/config/database.ini ' . '<br/>Please check this file and make sure everything is setup correctly.'; } } else { echo 'An ini-parsing error has occured. <br/>Please check all configuration files and make sure ' . 'everything is setup correctly'; } } elseif (stristr($zceMsg, 'syntax error') !== false) { if (stristr($zceMsg, 'application.ini') !== false) { echo 'There is a syntax error in ' . APPLICATION_PATH . '/config/application.ini ' . '<br/>Please check this file and make sure everything is setup correctly.'; } elseif (stristr($zceMsg, 'database.ini') !== false) { echo 'There is a syntax error in ' . APPLICATION_PATH . '/config/database.ini ' . '<br/>Please check this file and make sure everything is setup correctly.'; } else { echo 'A syntax error has been reached. <br/>Please check all configuration files and make sure ' . 'everything is setup correctly.'; } } else { // Then the exception message says nothing about parse_ini_file nor 'syntax error' echo 'Please check all configuration files, and ensure all settings are valid.'; } echo '<br/>For more information and help on installing OpenFISMA, please refer to the ' . '<a target="_blank" href="http://manual.openfisma.org/display/ADMIN/Installation">' . 'Installation Guide</a>'; } catch (Doctrine_Manager_Exception $dme) { echo '<h1>An exception occurred while bootstrapping the application.</h1>'; // Does database.ini have valid settings? Or is it the same content as database.ini.template? $databaseIniFail = false; $iniData = file(APPLICATION_PATH . '/config/database.ini'); $iniData = str_replace(chr(10), '', $iniData); if (in_array('db.adapter = ##DB_ADAPTER##', $iniData)) { $databaseIniFail = true; } if (in_array('db.host = ##DB_HOST##', $iniData)) { $databaseIniFail = true; } if (in_array('db.port = ##DB_PORT##', $iniData)) { $databaseIniFail = true; } if (in_array('db.username = ##DB_USER##', $iniData)) { $databaseIniFail = true; } if (in_array('db.password = ##DB_PASS##', $iniData)) { $databaseIniFail = true; } if (in_array('db.schema = ##DB_NAME##', $iniData)) { $databaseIniFail = true; } if ($databaseIniFail) { echo 'You have not applied the settings in ' . APPLICATION_PATH . '/config/database.ini appropriately. ' . 'Please review the contents of this file and try again.'; } else { if (Fisma::debug()) { echo '<p>' . get_class($dme) . '</p><p>' . $dme->getMessage() . '</p><p>' . "<p><pre>Stack Trace:\n" . $dme->getTraceAsString() . '</pre></p>'; } else { $logString = get_class($dme) . "\n" . $dme->getMessage() . "\nStack Trace:\n" . $dme->getTraceAsString() . "\n"; Zend_Registry::get('Zend_Log')->err($logString); } } } catch (Exception $exception) { // If a bootstrap exception occurs, that indicates a serious problem, such as a syntax error. // We won't be able to do anything except display an error. echo '<h1>An exception occurred while bootstrapping the application.</h1>'; if (Fisma::debug()) { echo '<p>' . get_class($exception) . '</p><p>' . $exception->getMessage() . '</p><p>' . "<p><pre>Stack Trace:\n" . $exception->getTraceAsString() . '</pre></p>'; } else { $logString = get_class($exception) . "\n" . $exception->getMessage() . "\nStack Trace:\n" . $exception->getTraceAsString() . "\n"; Zend_Registry::get('Zend_Log')->err($logString); } }

    Read the article

  • Eclipse ADT: Layout Properties Editor doesn't work correctly

    - by NullNoname
    I have a new, clean installation of Eclipse Kepler (4.3.1) SR1 (x64) in Linux Mint 15 Olivia x64 (based on Ubuntu 13.04 “Raring Ringtail”). ADT version is 22.3.0, and Java is Oracle's 1.7.0_45. The problem is, I cannot edit the properties in layout editor; nothing happens when I click "..." button, nor I can edit the properties directly by clicking the empty space. The boolean properties don't even contain the checkbox. This doesn't happen in Windows XP 32bit, with the same versions of Eclipse and ADT: Anyone know any workarounds/reasons for this? Looks like Mac OS X Mountain Lion had a similar issue in the past, but I heard that was fixed, and I'm talking about Linux version here. I had no such problems in Eclipse Indigo and an old version of ADT, but I can't remember the exact versions of them. EDIT: Lubuntu 13.04 (32bit) in VMware Player doesn't have this problem.

    Read the article

  • Clean Up the New Ubuntu Grub2 Boot Menu

    - by Trevor Bekolay
    Ubuntu adopted the new version of the Grub boot manager in version 9.10, getting rid of the old problematic menu.lst. Today we look at how to change the boot menu options in Grub2. Grub2 is a step forward in a lot of ways, and most of the annoying menu.lst issues from the past are gone. Still, if you’re not vigilant with removing old versions of the kernel, the boot list can still end up being longer than it needs to be. Note: You may have to hold the SHIFT button on your keyboard while booting up to get this menu to show. If only one operating system is installed on your computer, it may load it automatically without displaying this menu. Remove Old Kernel Entries The most common clean up task for the boot menu is to remove old kernel versions lying around on your machine. In our case we want to remove the 2.6.32-21-generic boot menu entries. In the past, this meant opening up /boot/grub/menu.lst…but with Grub2, if we remove the kernel package from our computer, Grub automatically removes those options. To remove old kernel versions, open up Synaptic Package Manager, found in the System > Administration menu. When it opens up, type the kernel version that you want to remove in the Quick search text field. The first few numbers should suffice. For each of the entries associated with the old kernel (e.g. linux-headers-2.6.32-21 and linux-image-2.6.32-21-generic), right-click and choose Mark for Complete Removal. Click the Apply button in the toolbar and then Apply in the summary window that pops up. Close Synaptic Package Manager. The next time you boot up your computer, the Grub menu will not contain the entries associated with the removed kernel version. Remove Any Option by Editing /etc/grub.d If you need more fine-grained control, or want to remove entries that are not kernel versions, you must change the files located in /etc/grub.d. /etc/grub.d contains files that hold the menu entries that used to be contained in /boot/grub/menu.lst. If you want to add new boot menu entries, you would create a new file in this folder, making sure to mark it as executable. If you want to remove boot menu entries, as we do, you would edit files in this folder. If we wanted to remove all of the memtest86+ entries, we could just make the 20_memtest86+ file non-executable, with the terminal command sudo chmod –x 20_memtest86+ Followed by the terminal command sudo update-grub Note that memtest86+ was not found by update-grub because it will only consider executable files. However, instead, we’re going to remove the Serial console 115200 entry for memtest86+… Open a terminal window Applications > Accessories > Terminal. In the terminal window, type in the command: sudo gedit /etc/grub.d/20_memtest86+ The menu entries are found at the bottom of this file. Comment out the menu entry for serial console 115200 by adding a “#” to the start of each line. Save and close this file. In the terminal window you opened, enter in the command sudo update-grub Note: If you don’t run update-grub, the boot menu options will not change! Now, the next time you boot up, that strange entry will be gone, and you’re left with a simple and clean boot menu. Conclusion While changing Grub2’s boot menu may seem overly complicated to legacy Grub masters, for normal users, Grub2 means that you won’t have to change the boot menu that often. Fortunately, if you do have to do it, the process is still pretty easy. For more detailed information about how to change entries in Grub2, this Ubuntu forum thread is a great resource. If you’re using an older version of Ubuntu, check out our article on how to clean up Ubuntu grub boot menu after upgrades. Similar Articles Productive Geek Tips Clean Up Ubuntu Grub Boot Menu After UpgradesReinstall Ubuntu Grub Bootloader After Windows Wipes it OutChange the GRUB Menu Timeout on UbuntuHow To Switch to Console Mode for Ubuntu VMware GuestSet Windows as Default OS when Dual Booting Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

    Read the article

  • Assistance in setting up new APC Smart-UPS RT on a new VMware enviroment

    - by user38085
    I'm new to the realm of setting up a APC Smart-UPS RT 8000VA UPS with a management network card (AP9618). The project calls for the upgrade of the firmware for the network card to the newest and greatest. It also calls for the Powerchute Business Software to be installed with notifications setup per email for temperature, shutdown, and battery low. I know I'll have to use the serial cable to flash the firmware and install the software on one server 2003 box. Also on that server I'll have to install the software and setup the GUI (IP address) interface. Whats confusing the most is the whole process, and steps to use without taking down the network, which would be very bad. In flashing the firmware does it take down the UPS? Do i have to run BOOTP commands to setup the network card? Also no agents will be used on any of the VWware OS's and no SNMP trap will be used.

    Read the article

  • UnsatisfiedLinkError on xawt when running HEC-HMS.sh

    - by G.Oxsen
    I am a recent adopter of Linux and this problem has got me stumped. I use HEC-HMS and HEC-DSSVue for work on a regular basis. I have been using the widows versions in wine but they are really buggy. So I decided to try out the linux versions. the links below will take you to the download pages for these two programs. They are free programs for Hydrology and data management. Once I install them and attempt to run the shell file (HEC-HMS.sh for example) I get a ton of java errors that I do not understand. If I had to guess I would say that the java files in question can not be found. When I check to see if java is installed it is. Here is the output from the terminal from trying to run HEC-HMS.sh: Exception in thread "Thread-1" java.lang.UnsatisfiedLinkError: /home/smythe/HEC/hec-hms35/java/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(Unknown Source) at java.lang.ClassLoader.loadLibrary(Unknown Source) at java.lang.Runtime.load0(Unknown Source) at java.lang.System.load(Unknown Source) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(Unknown Source) at java.lang.ClassLoader.loadLibrary(Unknown Source) at java.lang.Runtime.loadLibrary0(Unknown Source) at java.lang.System.loadLibrary(Unknown Source) at sun.security.action.LoadLibraryAction.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at sun.awt.NativeLibLoader.loadLibraries(Unknown Source) at sun.awt.DebugHelper.<clinit>(Unknown Source) at java.awt.Component.<clinit>(Unknown Source) at javax.swing.ImageIcon.<clinit>(Unknown Source) at hms.i.c(Unknown Source) at hms.i.b(Unknown Source) at hms.K.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Exception in thread "Thread-4" java.lang.UnsatisfiedLinkError: /home/smythe/HEC/hec-hms35/java/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(Unknown Source) at java.lang.ClassLoader.loadLibrary(Unknown Source) at java.lang.Runtime.load0(Unknown Source) at java.lang.System.load(Unknown Source) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(Unknown Source) at java.lang.ClassLoader.loadLibrary(Unknown Source) at java.lang.Runtime.loadLibrary0(Unknown Source) at java.lang.System.loadLibrary(Unknown Source) at sun.security.action.LoadLibraryAction.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.awt.Toolkit.loadLibraries(Unknown Source) at java.awt.Toolkit.<clinit>(Unknown Source) at sun.print.CUPSPrinter.<clinit>(Unknown Source) at sun.print.UnixPrintServiceLookup.getDefaultPrintService(Unknown Source) at sun.print.UnixPrintServiceLookup.refreshServices(Unknown Source) at sun.print.UnixPrintServiceLookup$PrinterChangeListener.run(Unknown Source) Exception in thread "main" java.lang.NoClassDefFoundError: Could not initialize class java.awt.Toolkit at java.awt.Color.<clinit>(Unknown Source) at hms.model.l.<init>(Unknown Source) at hms.model.ProjectManager.<init>(Unknown Source) at hms.Hms.<init>(Unknown Source) at hms.Hms.main(Unknown Source) Exception in thread "Thread-2" java.lang.NoClassDefFoundError: Could not initialize class sun.print.CUPSPrinter at sun.print.UnixPrintServiceLookup.getDefaultPrintService(Unknown Source) at javax.print.PrintServiceLookup.lookupDefaultPrintService(Unknown Source) at hms.util.f.run(Unknown Source) at java.lang.Thread.run(Unknown Source) I get similar outputs when I try to run HEC-DSSVue.sh. If anyone could shed some light on a solution I would really appreciate it. The problem turned out to be that the program needed 32 bit versions of the particular dependencies.

    Read the article

  • jackd fails to start

    - by wickedchicken
    I'm trying to have a setup where JACK interfaces directly to ALSA and pulseaudio communicates to JACK. This setup worked OK (I had to manually start things a few times) but as I understood the Ubuntu daemon setup and perfected things jackd stopped working completely. I'm running 10.10. If I run something through ALSA I get sound no problem. However, when I run jack with realtime: /usr/bin/jackd -v -R -ch -Z -t2000 -d alsa -P I get the following error: jackd watchdog: timeout - killing jackd Conversely, if I run without realtime: /usr/bin/jackd -v -r -ch -Z -t2000 -d alsa -P I get: ALSA: poll time out, polled for 32032138 usecs DRIVER NT: could not run driver cycle Jack was working just fine before I made these changes; while I don't have an exact copy of my original configuration I recall running the bare minimum of options worked fine. I've seen some articles saying the problem is with ALSA capture. In fact, I tried enabling capture in alsamixer once and everything worked! On reboot that success was not repeated and I haven't been able to get jack working since. That shouldn't matter because specifying -P should obviate any capture issues. Short summary: I can't get jackd to work under any circumstances (unless I specify -d dummy). Sound works with other programs with ALSA, but when I run JACK the daemon opens the card but times out and dies. JACK worked fine before but I can't figure out what changed (or where to even look). I should mention I am running with CPU speed throttling on, but I'm using HPET to mitigate this (and I've run jack with no issue before). Thanks!

    Read the article

  • TeamViewer installed but not running on CentOS

    - by Root
    I followed these http://www.tecmint.com/how-to-install-teamviewer-8-on-linux-distributions/ steps and installed TeamViewer on my CentOS5 server without any errors in SSH but when I try to start TeamViewer I am just getting the following output but I can't find my TeamViewer username and password to try to connect to my server. root@vps [~]# teamviewer Init... Checking setup... Launching TeamViewer... root@vps [~]# teamviwer -info -bash: teamviwer: command not found root@vps [~]# /usr/bin/teamviewer -info Init... Checking setup... Launching TeamViewer... root@vps [~]# whereis teamviewer teamviewer: /usr/bin/teamviewer /etc/teamviewer root@vps [~]# /usr/bin/teamviewer -help Init... Checking setup... Launching TeamViewer... root@vps [~]# Can anyone help me finding my TeamViwer id and password to connect to my Server. Thanks.

    Read the article

  • PostgreSQL 9.1 Database Replication Between Two Production Environments with Load Balancer

    - by littleK
    I'm investigating different solutions for database replication between two PostgreSQL 9.1 databases. The setup will include two production servers on the cloud (Amazon EC2 X-Large Instances), with an elastic load balancer. What is the typical database implementation for for this type of setup? A master-master replication (with Bucardo or rubyrep)? Or perhaps use only one shared database between the two environments, with a shared disk failover? I've been getting some ideas from http://www.postgresql.org/docs/9.0/static/different-replication-solutions.html. Since I don't have a lot of experience in database replication, I figured I would ask the experts. What would you recommend for the described setup?

    Read the article

  • Testing Routes in ASP.NET MVC with MvcContrib

    - by Guilherme Cardoso
    I've decide to write about unit testing in the next weeks. If we decide to develop with Test-Driven Developement pattern, it's important to not forget the routes. This article shows how to test routes. I'm importing my routes from my RegisterRoutes method from the Global.asax of Project.Web created by default (in SetUp). I'm using ShouldMapTp() from MvcContrib: http://mvccontrib.codeplex.com/ The controller is specified in the ShouldMapTo() signature, and we use lambda expressions for the action and parameters that are passed to that controller. [SetUp] public void Setup() { Project.Web.MvcApplication.RegisterRoutes(RouteTable.Routes); } [Test] public void Should_Route_HomeController() { "~/Home" .ShouldMapTo<HomeController>(action => action.Index()); } [Test] public void Should_Route_EventsController() { "~/Events" .ShouldMapTo<EventsController>(action => action.Index()); "~/Events/View/44/Concert-DevaMatri-22-January-" .ShouldMapTo<EventosController>(action => action.Read(1, "Title")); // In this example,44 is the Id for my Event and "Concert-DevaMatri-22-January" is the title for that Event } [TearDown] public void teardown() { RouteTable.Routes.Clear(); }

    Read the article

  • E-Business Suite Technology Stack Roadmap (April 2010) Now Available

    - by Steven Chan
    Keeping up with our E-Business Suite technology stack roadmap can be challenging.  Regular readers of this blog know that we certify new combinations and versions of Oracle products with the E-Business Suite every few weeks.  We also update our certification plans and roadmap as new third-party products like Microsoft Office 2010 and Firefox are announced or released.  Complicating matters further, various Oracle products leave Premier Support or are superceded by more-recent versions.This constant state of change means that any static representation of our roadmap is really a snapshot in time, and a snapshot that might begin to yellow and fade fairly quickly.  With that caveat in mind, here's this month's snapshot that I presented at the OAUG/Collaborate 2010 conference in Las Vegas last week:EBS Technology Stack Roadmap (April 2010)

    Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >