Search Results

Search found 21717 results on 869 pages for 'setup versions'.

Page 109/869 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• I have Oracle SQL Developer Installed, Now What?

  - by thatjeffsmith

  If you’re here because you downloaded a copy of Oracle SQL Developer and now you need help connecting to a database, then you’re in the right place. I’ll show you what you need to get up and going so you can finish your homework, teach yourself Oracle database, or get ready for that job interview. You’ll need about 30 minutes to set everything up…and about 5 years to become proficient with Oracle Oracle Database come with SQL Developer but SQL Developer doesn’t include a database If you install Oracle database, it includes a copy of SQL Developer. If you’re running that copy of SQL Developer, please take a second to upgrade now, as it is WAY out of date. But I’m here to talk to the folks that have downloaded SQL Developer and want to know what to do next. You’ve got it running. You see this ‘Connection’ dialog, and… Where am I connecting to, and who as? You NEED a database Installing SQL Developer does not give you a database. So you’re going to need to install Oracle and create a database, or connect to a database that is already up and running somewhere. Basically you need to know the following: where is this database, what’s it called, and what port is the listener running on? The Default Connection properties in SQL Developer These default settings CAN work, but ONLY if you have installed Oracle Database Express Edition (XE). Localhost is a network alias for 127.0.0.1 which is an IP address that maps to the ‘local’ machine, or the machine you are reading this blog post on. The listener is a service that runs on the server and handles connections for the databases on that machine. You can run a database without a listener and you can run a listener without a database, but you can’t connect to a database on a different server unless both that database and listener are up and running. Each listener ‘listens’ on one or more ports, you need to know the port number for each connection. The default port is 1521, but 1522 is often pretty common. I know all of this sounds very complicated Oracle is a very sophisticated piece of software. It’s not analogous to downloading a mobile phone app and and using it 10 seconds later. It’s not like installing Office/Access either – it requires services, environment setup, kernel tweaks, etc. However. Normally an administrator will setup and install Oracle, create the database, and configure the listener for everyone else to use. They’ll often also setup the connection details for everyone via a ‘TNSNAMES.ORA’ file. This file contains a list of database connection details for folks to browse – kind of like an Oracle database phoneboook. If someone has given you a TNSNAMES.ORA file, or setup your machine to have access to a TNSNAMES file, then you can just switch to the ‘TNS’ connection type, and use the dropdown to select the database you want to connect to. Then you don’t have to worry about the server names, database names, and the port numbers. ORCL – that sounds promising! ORCL is the default SID when creating a new database with the Database Creation Assistant (DBCA). It’s just me, and I need help! No administrator, no database, no nothing. What do you do? You have a few options: Buy a copy of Oracle and download, install, and create a database Download and install XE (FREE!) Download, import, and run our Developer Days Hands-on-Lab (FREE!) If you’re a student (or anyone else) with little to no experience with Oracle, then I recommend the third option. Oracle Technology Network Developer Day: Hands-on Database Application Development Lab The OTN lab runs on a A Virtual Box image which contains: 11gR2 Enterprise Edition copy of Oracle a database and listener running for you to connect to lots of demo data for you to play with SQL Developer installed and ready to connect Some browser based labs you can step through to learn Oracle You download the image, you download and install Virtual Box (also FREE!), then you IMPORT the image you previously downloaded. You then ‘Start’ the image. It will boot a copy of Oracle Enterprise Linux (OEL), start your database, and all that jazz. You can then start up and run SQL Developer inside the image OR you can connect to the database running on the image using the copy of SQL Developer you installed on your host machine. Setup Port Forwarding to Make It Easy to Connect From Your Host When you start the image, it will be assigned an IP address. Depending on what network adapter you select in the image preferences, you may get something that can get out to the internet from your image, something your host machine can see and connect to, or something that kind of just lives out there in a vacuum. You want to avoid the ‘vacuum’ option – unless you’re OK with running SQL Developer inside the Linux image. Open the Virtual Box image properties and go to the Networking options. We’re going to setup port forwarding. This will tell your machine that anything that happens on port 1521 (the default Oracle Listener port), should just go to the image’s port 1521. So I can connect to ‘localhost’ and it will magically get transferred to the image that is running. Oracle Virtual Box Port Forwarding 1521 listener database Now You Just Need a Username and Password The default passwords on this image are all ‘oracle’ – so you can connect as SYS, HR, or whatever – just use ‘oracle’ as the password. The Linux passowrds are all ‘oracle’ too, so you can login as ‘root’ or as ‘oracle’ in the Linux desktop. Connect! Connect as HR to your Oracle database running on the OTN Developer Days Virtual Box image If you’re connecting to someone else’s database, you need to ask the person that manages that environment to create for you an account. Don’t try to ‘guess’ or ‘figure out’ what the username and password is. Introduce yourself, explain your situation, and ask kindly for access. This is your first test – can you connect? I know it’s hard to get started with Oracle. There are however many things we offer to make this easier. You’ll need to do a bit of RTM first though. Once you know what’s required, you will be much more likely to succeed. Of course, if you need help, you know where to find me

  Read the article

• .NET 4.5 is an in-place replacement for .NET 4.0

  - by Rick Strahl

  With the betas for .NET 4.5 and Visual Studio 11 and Windows 8 shipping many people will be installing .NET 4.5 and hacking away on it. There are a number of great enhancements that are fairly transparent, but it's important to understand what .NET 4.5 actually is in terms of the CLR running on your machine. When .NET 4.5 is installed it effectively replaces .NET 4.0 on the machine. .NET 4.0 gets overwritten by a new version of .NET 4.5 which - according to Microsoft - is supposed to be 100% backwards compatible. While 100% backwards compatible sounds great, we all know that 100% is a hard number to hit, and even the aforementioned blog post at the Microsoft site acknowledges this. But there's so much more than backwards compatibility that makes this awkward at best and confusing at worst. What does ‘Replacement’ mean? When you install .NET 4.5 your .NET 4.0 assemblies in the \Windows\.NET Framework\V4.0.30319 are overwritten with a new set of assemblies. You end up with overwritten assemblies as well as a bunch of new ones (like the new System.Net.Http assemblies for example). The following screen shot demonstrates system.dll on my test machine (left) running .NET 4.5 on the right and my production laptop running stock .NET 4.0 (right):   Clearly they are different files with a difference in file sizes (interesting that the 4.5 version is actually smaller). That’s not all. If you actually query the runtime version when .NET 4.5 is installed with with Environment.Version you still get: 4.0.30319 If you open the properties of System.dll assembly in .NET 4.5 you'll also see: Notice that the file version is also left at 4.0.xxx. There are differences in build numbers: .NET 4.0 shows 261 and the current .NET 4.5 beta build is 17379. I suppose you can use assume a build number greater than 17000 is .NET 4.5, but that's pretty hokey to say the least. There’s no easy or obvious way to tell whether you are running on 4.0 or 4.5 – to the application they appear to be the same runtime version. And that is what Microsoft intends here. .NET 4.5 is intended as an in-place upgrade. Compile to 4.5 run on 4.0 – not quite! You can compile an application for .NET 4.5 and run it on the 4.0 runtime – that is until you hit a new feature that doesn’t exist on 4.0. At which point the app bombs at runtime. Say you write some code that is mostly .NET 4.0, but only has a few of the new features of .NET 4.5 like aync/await buried deep in the bowels of the application where it only fires occasionally. .NET will happily start your application and run everything 4.0 fine, until it hits that 4.5 code – and then crash unceremoniously at runtime. Oh joy! You can .NET 4.0 applications on .NET 4.5 of course and that should work without much fanfare. Different than .NET 3.0/3.5 Note that this in-place replacement is very different from the side by side installs of .NET 2.0 and 3.0/3.5 which all ran on the 2.0 version of the CLR. The two 3.x versions were basically library enhancements on top of the core .NET 2.0 runtime. Both versions ran under the .NET 2.0 runtime which wasn’t changed (other than for security patches and bug fixes) for the whole 3.x cycle. The 4.5 update instead completely replaces the .NET 4.0 runtime and leaves the actual version number set at v4.0.30319. When you build a new project with Visual Studio 2011, you can still target .NET 4.0 or you can target .NET 4.5. But you are in effect referencing the same set of assemblies for both regardless which version you use. What's different is the compiler used to compile and link your code so compiling with .NET 4.0 gives you just the subset of the functionality that is available in .NET 4.0, but when you use the 4.5 compiler you get the full functionality of what’s actually available in the assemblies and extra libraries. It doesn’t look like you will be able to use Visual Studio 2010 to develop .NET 4.5 applications. Good news – Bad news Microsoft is trying hard to experiment with every possible permutation of releasing new versions of the .NET framework apparently. No two updates have been the same. Clearly updating to a full new version of .NET (ie. .NET 2.0, 4.0 and at some point 5.0 runtimes) has its own set of challenges, but doing an in-place update of the runtime and then not even providing a good way to tell which version is installed is pretty whacky even by Microsoft’s standards. Especially given that .NET 4.5 includes a fairly significant update with all the aysnc functionality baked into the runtime. Most of the IO APIs have been updated to support task based async operation which significantly affects many existing APIs. To make things worse .NET 4.5 will be the initial version of .NET that ships with Windows 8 so it will be with us for a long time to come unless Microsoft finally decides to push .NET versions onto Windows machines as part of system upgrades (which currently doesn’t happen). This is the same story we had when Vista launched with .NET 3.0 which was a minor version that quickly was replaced by 3.5 which was more long lived and practical. People had enough problems dealing with the confusing versioning of the 3.x versions which ran on .NET 2.0. I can’t count the amount support calls and questions I’ve fielded because people couldn’t find a .NET 3.5 entry in the IIS version dialog. The same is likely to happen with .NET 4.5. It’s all well and good when we know that .NET 4.5 is an in-place replacement, but administrators and IT folks not intimately familiar with .NET are unlikely to understand this nuance and end up thoroughly confused which version is installed. It’s hard for me to see any upside to an in-place update and I haven’t really seen a good explanation of why this approach was decided on. Sure if the version stays the same existing assembly bindings don’t break so applications can stay running through an update. I suppose this is useful for some component vendors and strongly signed assemblies in corporate environments. But seriously, if you are going to throw .NET 4.5 into the mix, who won’t be recompiling all code and thoroughly test that code to work on .NET 4.5? A recompile requirement doesn’t seem that serious in light of a major version upgrade.  Resources http://blogs.msdn.com/b/dotnet/archive/2011/09/26/compatibility-of-net-framework-4-5.aspx http://www.devproconnections.com/article/net-framework/net-framework-45-versioning-faces-problems-141160© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• OFM 11g: OAM SSO for Forms and ADF Faces

  - by olaf.heimburger

  In my blog entry OFM 11g: Implementing OAM SSO with Forms we set the foundation for providing a complete Single Sign-On solution based on Oracle Access Manager (OAM). This foundation should now be used to combine Forms 11g and ADF Faces 11g applications with a transparent login. The Beginning Before we start, lets re-consider the requirements to achieve the ultimate goal. These are:- Access to the Forms 11g Application must be authenticated by OAM (protected). Access to the ADF Faces 11g Application must be authenticated by OAM (protected). Switching from one application to the other should not result in a re-authentication (aka single sign-on). User identity should be availble to the application without any extra work in the application code. All these are the common requirements for a single sign-on solution. The challenge here is that Forms relies on Oracle AS SSO (OSSO or "the old SSO") while ADF Faces is quite open and can be protected by Oracle AS SSO and Oracle Access Manager SSO (OAM SSO or "the modern SSO"). Both application types can use their own login mechanism. The Forms 11g Application To demonstrate the SSO functionality, we use the standard Forms test (/forms/frmservlet?form=test.fmx). Although this shows nothing specific in the Forms application, it is good enough to demonstrate that it is protected. The ADF Faces 11g Application With ADF 11g you can develop quite a number of useful Faces based applications. Among many features, it comes with the ADF Security feature that provides you with functionality to protect your pages, regions, and even TaskFlows from un-authenticated usage in a declarative way.To demonstrate that functionality a sample application with different access levels plus a login dialog is used. This application comes with a publc page that has protected content (a button). Once you are authenticated for the application, the protected content and some personalisation (the users name) is shown. Protecting Forms 11g As already explained in the OFM 11g: Implementing OAM SSO with Forms, the easiest way to protect a Forms application is to configure it as a OSSO partner application, setup mod_osso, test it, migrate OSSO to OAM SSO with the Upgrade Agent, reconfigure mod_osso, and you are done.Sort of. By default the OAM is configured to run in co-exist mode. This means that a user has to re-authenticate to the Forms application when logged into an OAM SSO application before. To avoid this, you must disable the co-exist mode, for example by using WLST and issue the disableCoexistMode on the OAM server. Protecting ADF Faces 11g To protect an ADF Faces 11g application we have to consider two scenarios: Use a HTTPD server in front of WLS Use WLS without a HTTPD server Both scenarios have their pro's and cons' and we won't get into details and just describe how to configure both. Scenario 1: HTTPD Server with WLS In this scenario we have to setup the environment in some steps:- Configure a WebGate at OAMThis configuration can be done through the OAM console or by a script. No matter which way you choose, the WebGate configuration files will be created for you. Install the OAM WebGate into an HTTPD serverThe type of webgate you need to install depends on you HTTPD server. With Oracle HTTP Server 11g you can use the latest OAM 11g WebGate. With other HTTPD servers you must resort to OAM 10g WebGates. A OAM 11g WebGate can use the pre-created configuration files supplied during the WebGate configuration at OAM. An OAM 10g WebGate asks for the specific configuration and verifies it during installation. Configure the WLS plugin to forward the requests to WLSAgain, depending on your HTTPD Server you have different plugins to forward requests to WLS. With OHS 11g you can use the pre-installed mod_wl_ohs plugin. Its configuration is quite simple and straightforward. Configure an OAM SSPI Provider as a IdentityAsserter in WLS to retrieve the user identifierThis configuration is quite important as it retrieves the user identifier for the next step. If you have a SOA Suite installation within your OFM_HOME, the necessary software is already installed and you only need to setup your Security Realm within WLS.You can do this by pointing your browser to the WLS Console, log in as administrator, select the Security Realm (usually myrealm), and select Providers. We add the OAMIdentityAsserter as the first SSPI Provider. It is important that the Control Flag is set to SUFFICIENT. Every other configuration can be left as is, no changes are necessary here. Configure an OAM Identity Provider to get the real user identityIn OFM 11g: Implementing OAM SSO with Forms we have configured an OID as Identity Store. To get the user identity we need to configure the same OID as an SSPI Provider for WLS. This will retrieve the real user information from OID and creates the JAAS Subject and Principals to be used by any application within WLS.Again, you can do this by pointing your browser to the WLS Console, log in as administrator, select the Security Realm (usually myrealm), and select Providers. Now add the OIDAuthenticator as the second SSPI Provider. It is important that the Control Flag is set to OPTIONAL. After we saved this setup, we need to configure this provider by setting the Provider Specific details to access OID. Scenario 2: WLS only This scenario is a bit easier but requires more work in the WLS setup:- Configure a WebGate at OAMThis configuration can be done through the OAM console or by a script. No matter which way you choose, the WebGate configuration files will be created for you. Configure the OAM SSPI Provider as IdentityAuthenticator to authenticate and set the user identifierWhen using the OAM SSPI Provider as OAMAuthenticator we create it with the Control Flag as SUFFICIENT. Afte saving it, the Provider Specific settings must be configured to allow the OAM SSPI Provider to connect to the OAM Server. Configure an OAM Identity Provider to get the real user identity providerAgain, you can do this by pointing your browser to the WLS Console, log in as administrator, select the Security Realm (usually myrealm), and select Providers. Now add the OIDAuthenticator as the second SSPI Provider. It is important that the Control Flag is set to OPTIONAL. After we saved this setup, we need to configure this provider by setting the Provider Specific details to access OID. Configure ADF 11g Application for OAM Actually, there are no changes to be made within the ADF application. We only need to add the value CLIENT_CERT to the <auth-mode> tag in the <login-config> tag in the web.xml file. Testing To test the configuration, simply point your browser to one of both appliction URLs. OAM should kick in and redirect you to the OAM Login page. After you have entered the correct credentials, access to the URLs is granted and you will see the application. Enjoy!

  Read the article

• Java JRE 1.6.0_65 Certified with Oracle E-Business Suite

  - by Steven Chan (Oracle Development)

  The latest Java Runtime Environment 1.6.0_65 (a.k.a. JRE 6u65-b14) and later updates on the JRE 6 codeline are now certified with Oracle E-Business Suite Release 11i and 12 for Windows-based desktop clients. Effects of new support dates on Java upgrades for EBS environments Support dates for the E-Business Suite and Java have changed.  Please review the sections below for more details: What does this mean for Oracle E-Business Suite users? Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? All JRE 6 and 7 releases are certified with EBS upon release Our standard policy is that all E-Business Suite customers can apply all JRE updates to end-user desktops from JRE 1.6.0_03 and later updates on the 1.6 codeline, and from JRE 7u10 and later updates on the JRE 7 codeline.  We test all new JRE 1.6 and JRE 7 releases in parallel with the JRE development process, so all new JRE 1.6 and 7 releases are considered certified with the E-Business Suite on the same day that they're released by our Java team.  You do not need to wait for a certification announcement before applying new JRE 1.6 or JRE 7 releases to your EBS users' desktops. What's new in in this Java release?Java 6 is now available only via My Oracle Support for E-Business Suite users.  You can find links to this release, including Release Notes, documentation, and the actual Java downloads here: All Java SE Downloads on MOS (Note 1439822.1) 32-bit and 64-bit versions certified This certification includes both the 32-bit and 64-bit JRE versions. 32-bit JREs are certified on: Windows XP Service Pack 3 (SP3) Windows Vista Service Pack 1 (SP1) and Service Pack 2 (SP2) Windows 7 and Windows 7 Service Pack 1 (SP1) 64-bit JREs are certified only on 64-bit versions of Windows 7 and Windows 7 Service Pack 1 (SP1). Worried about the 'mismanaged session cookie' issue? No need to worry -- it's fixed.  To recap: JRE releases 1.6.0_18 through 1.6.0_22 had issues with mismanaging session cookies that affected some users in some circumstances. The fix for those issues was first included in JRE 1.6.0_23. These fixes will carry forward and continue to be fixed in all future JRE releases.  In other words, if you wish to avoid the mismanaged session cookie issue, you should apply any release after JRE 1.6.0_22. Implications of Java 6 End of Public Updates for EBS Users The Support Roadmap for Oracle Java is published here: Oracle Java SE Support Roadmap The latest updates to that page (as of Sept. 19, 2012) state (emphasis added): Java SE 6 End of Public Updates Notice After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. Existing Java SE 6 downloads already posted as of February 2013 will remain accessible in the Java Archive on Oracle Technology Network. Developers and end-users are encouraged to update to more recent Java SE versions that remain available for public download. For enterprise customers, who need continued access to critical bug fixes and security fixes as well as general maintenance for Java SE 6 or older versions, long term support is available through Oracle Java SE Support . What does this mean for Oracle E-Business Suite users? EBS users fall under the category of "enterprise users" above.  Java is an integral part of the Oracle E-Business Suite technology stack, so EBS users will continue to receive Java SE 6 updates from February 2013 to the end of Java SE 6 Extended Support in June 2017. In other words, nothing changes for EBS users after February 2013.  EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6 until the end of Java SE 6 Extended Support in June 2017.  How can EBS customers obtain Java 6 updates after the public end-of-life? EBS customers can download Java 6 patches from My Oracle Support.  For a complete list of all Java SE patch numbers, see: All Java SE Downloads on MOS (Note 1439822.1) Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? This upgrade is highly recommended but remains optional while Java 6 is covered by Extended Support. Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JRE 6 desktop clients.  Java 6 is covered by Extended Support until June 2017.  All E-Business Suite customers must upgrade to JRE 7 by June 2017. Coexistence of JRE 6 and JRE 7 on Windows desktops The upgrade to JRE 7 is highly recommended for EBS users, but some users may need to run both JRE 6 and 7 on their Windows desktops for reasons unrelated to the E-Business Suite. Most EBS configurations with IE and Firefox use non-static versioning by default. JRE 7 will be invoked instead of JRE 6 if both are installed on a Windows desktop. For more details, see "Appendix B: Static vs. Non-static Versioning and Set Up Options" in Notes 290807.1 and 393931.1. Applying Updates to JRE 6 and JRE 7 to Windows desktops Auto-update will keep JRE 7 up-to-date for Windows users with JRE 7 installed. Auto-update will only keep JRE 7 up-to-date for Windows users with both JRE 6 and 7 installed.  JRE 6 users are strongly encouraged to apply the latest Critical Patch Updates as soon as possible after each release. The Jave SE CPUs will be available via My Oracle Support.  EBS users can find more information about JRE 6 and 7 updates here: Information Center: Installation & Configuration for Oracle Java SE (Note 1412103.2) The dates for future Java SE CPUs can be found on the Critical Patch Updates, Security Alerts and Third Party Bulletin.  An RSS feed is available on that site for those who would like to be kept up-to-date. What do Mac users need? Mac users running Mac OS 10.7 or 10.8 can run JRE 7 plug-ins.  See this article: EBS 12 certified with Mac OS X 10.7 and 10.8 with Safari 6 and JRE 7 Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? JRE is used for desktop clients.  JDK is used for application tier servers JDK upgrades for E-Business Suite application tier servers are highly recommended but currently remain optional while Java 6 is covered by Extended Support. Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JDK 6 for application tier servers.  Java SE 6 is covered by Extended Support until June 2017.  All EBS customers with application tier servers on Windows, Solaris, and Linux must upgrade to JDK 7 by June 2017. EBS customers running their application tier servers on other operating systems should check with their respective vendors for the support dates for those platforms. JDK 7 is certified with E-Business Suite 12.  See: Java (JDK) 7 Certified for E-Business Suite 12 Servers References Recommended Browsers for Oracle Applications 11i (Metalink Note 285218.1) Upgrading Sun JRE (Native Plug-in) with Oracle Applications 11i for Windows Clients (Metalink Note 290807.1) Recommended Browsers for Oracle Applications 12 (MetaLink Note 389422.1) Upgrading JRE Plugin with Oracle Applications R12 (MetaLink Note 393931.1) Related Articles Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23 Roundup: Oracle JInitiator 1.3 Desupported for EBS Customers in July 2009

  Read the article

• Part 1: What are EBS Customizations?

  - by volker.eckardt(at)oracle.com

  Everything what is not shipped as Oracle standard may be called customization. And very often we differentiate between setup and customization, although setup can also be required when working with customizations.This highlights one of the first challenges, because someone needs to track setup brought over with customizations and this needs to be synchronized with the (standard) setup done manually. This is not only a tracking issue, but also a documentation issue. I will cover this in one of the following blogs in more detail.But back to the topic itself. Mainly our code pieces (java, pl/sql, sql, shell scripts), custom objects (tables, views, packages etc.) and application objects (concurrent programs, lookups, forms, reports, OAF pages etc.) are treated as customizations. In general we define two types: customization by extension and customization by modification. For sure we like to minimize standard code modifications, but sometimes it is just not possible to provide a certain functionality without doing it.Keep in mind that the EBS provides a number of alternatives for modifications, just to mention some:Files in file system    add your custom top before the standard top to the pathBI Publisher Report    add a custom layout and disable the standard layout, automatically yours will be taken.Form /OAF Change    use personalization or substitutionUsing such techniques you are on the safe site regarding standard patches, but for sure a retest is always required!Many customizations are growing over the time, initially it was just one file, but in between we have 5, 10 or 15 files in our customization pack. The more files you have, the more important is the installation order.Last but not least also personalization's are treated as customizations, although you may not use any deployment pack to transfer such personalisation's (but you can). For OAF personalization's you can use iSetup, I have also enabled iSetup to allow Forms personalizations to transport.Interfaces and conversion objects are quite often also categorized as customizations and I promote this decision. Your development standards are related to all these kinds of custom code whether we are exchanging data with users (via form or report) or with other systems (via inbound or outbound interface).To cover all these types of customizations two acronyms have been defined: RICE and CEMLI.RICE = Reports, Interfaces, Conversions, and ExtensionsCEMLI = Customization, Extension, Modification, Localization, IntegrationThe word CEMLI has been introduced by Oracle On Demand and is used within Oracle projects quite often, but also RICE is well known as acronym.It doesn't matter which acronym you are using, the main task here is to classify and categorize your customizations to allow everyone to understand when you talk about RICE- 211, CEMLI XXFI_BAST or XXOM_RPT_030.Side note: Such references are not automatically objects prefixes, but they are often used as such. I plan also to address this point in one other blog.Thank you!Volker

  Read the article

• InfoPath Cannot Start Microsoft Visual Studio Tools for Applications

  - by ybbest

  When I am trying to access developer tools under developer tab in InfoPath Designer 2010 , I got this error InfoPath Cannot Start Microsoft Visual Studio Tools for Applications(See the screenshot below)     I got this error because , I do not install VSTA when I install office2010.To Install VSTA, you need to Launch Office 2010 setup from your Office 2010 installation media,choose the Add or Remove Features radio button in the installer then Set the Visual Studio Tools for Applications option to Run from My Computer and continue through the setup wizard. (See the screenshot below).Once this is done , you are ready to start VSTA for you InfoPath Form.

  Read the article

• Installing Gnome Classic on Ubuntu Server 12.04.1 64bit

  - by varunyellina

  I've installed Ubuntu Server Edition and setup open ssh,samba and lamp on my home desktop just to work on LAN. I also want setup a GUI on it for daily use. I've already performed the following sudo apt-get install gnome-session-fallback sudo apt-get install lightdm-gtk-greeter sudo apt-get install xinit I don't want to install Unity or the Gnome3 Shell on my system. Also I haven't found instructions to installing gnome-classic on a server edition(although it shouldn't make a difference).How do I get it to work?

  Read the article

• How do I set up nvidia graphics adapter to put out 1080p, it seems to be using interlace mode>

  - by keepitsimpleengineer

  After upgrading to 12.04, my mythbuntu client/server seems to be running in 1080i, the clue comes from: [ 1176.117] (II) NVIDIA(0): Setting mode "1920x1080_60i" [ 1231.340] (II) NVIDIA(0): Setting mode "DFP-1:1920x1080_60@1920x1080+0+0" This is from Xorg.0.log. This whole thing started from video tearing when watching Mythtv recordings. It didn't happen in 10.10. Should I use "TVStandard" "HD1080p" in the screen section since this is a dedicated HTPC? It only connects to an HDTV (1080p) via hdmi. Here is the current xorg.conf file: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Keyboard0" "CoreKeyboard" # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" FontPath "unix/:7100" EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Mouse0" # Driver "mouse" # Option "Protocol" "auto" # Option "Device" "/dev/psaux" # Option "Emulate3Buttons" "no" # Option "ZAxisMapping" "4 5" #EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Keyboard0" # Driver "kbd" #EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "SAMSUNG" HorizSync 26.0 - 81.0 VertRefresh 24.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 240" Option "TripleBuffer" "1" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection After a little digging, the question changes slightly, to wit... Per Chapter 19 of nvidia README... "If the EDID for the display device reported a preferred mode timing, and that mode timing is considered a valid mode, then that mode is used as the "nvidia-auto-select" mode." The EDID for my HDMI connected LCD monitor says use first device as preferred. Prefer first detailed timing : Yes Also: (--) NVIDIA(0): EDID maximum pixel clock : 230.0 MHz The list: (from startx -- -verbose 6 ) (--) NVIDIA(0): Detailed Timings: (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 148.50 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1089, 1125 (--) NVIDIA(0): H/V Polarity : +/+ This is the actual mode selected: (from xorg.0.log) (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 74.18 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1094, 1124 (--) NVIDIA(0): H/V Polarity : +/+ (--) NVIDIA(0): Extra : Interlaced (--) NVIDIA(0): CEA Format : 5 So my HTPC is down-converting to 1080i and then the Monitor is up-converting to 1080p How can I fix this, please?

  Read the article

• Do you write common pre-conditions for a large number of unit test cases ?

  - by Vinoth Kumar

  I have heard/read writing common pre-conditions for a large number of test cases is a bad thing, since this dependency may cause large number of test cases to fail if something changes . What are your thoughts on it ? If this is so , then what exactly is the purpose of setUp() method in Junit that runs before each test case ? If the same code inside setUp() runs before each test case , why cant it run only once before running all the test cases together ?

  Read the article

• Combining Shared Secret and Username Token – Azure Service Bus

  - by Michael Stephenson

  As discussed in the introduction article this walkthrough will explain how you can implement WCF security with the Windows Azure Service Bus to ensure that you can protect your endpoint in the cloud with a shared secret but also flow through a username token so that in your listening WCF service you will be able to identify who sent the message. This could either be in the form of an application or a user depending on how you want to use your token. Prerequisites Before going into the walk through I want to explain a few assumptions about the scenario we are implementing but to keep the article shorter I am not going to walk through all of the steps in how to setup some of this. In the solution we have a simple console application which will represent the client application. There is also the services WCF application which contains the WCF service we will expose via the Windows Azure Service Bus. The WCF Service application in this example was hosted in IIS 7 on Windows 2008 R2 with AppFabric Server installed and configured to auto-start the WCF listening services. I am not going to go through significant detail around the IIS setup because it should not matter in relation to this article however if you want to understand more about how to configure WCF and IIS for such a scenario please refer to the following paper which goes into a lot of detail about how to configure this. The link is: http://tinyurl.com/8s5nwrz   The Service Component To begin with let's look at the service component and how it can be configured to listen to the service bus using a shared secret but to also accept a username token from the client. In the sample the service component is called Acme.Azure.ServiceBus.Poc.UN.Services. It has a single service which is the Visual Studio template for a WCF service when you add a new WCF Service Application so we have a service called Service1 with its Echo method. Nothing special so far!.... The next step is to look at the web.config file to see how we have configured the WCF service. In the services section of the WCF configuration you can see I have created my service and I have created a local endpoint which I simply used to do a little bit of diagnostics and to check it was working, but more importantly there is the Windows Azure endpoint which is using the ws2007HttpRelayBinding (note that this should also work just the same if your using netTcpRelayBinding). The key points to note on the above picture are the service behavior called MyServiceBehaviour and the service bus endpoints behavior called MyEndpointBehaviour. We will go into these in more detail later.   The Relay Binding The relay binding for the service has been configured to use the TransportWithMessageCredential security mode. This is the important bit where the transport security really relates to the interaction between the service and listening to the Azure Service Bus and the message credential is where we will use our username token like we have specified in the message/clientCrentialType attribute. Note also that we have left the relayClientAuthenticationType set to RelayAccessToken. This means that authentication will be made against ACS for accessing the service bus and messages will not be accepted from any sender who has not been authenticated by ACS.   The Endpoint Behaviour In the below picture you can see the endpoint behavior which is configured to use the shared secret client credential for accessing the service bus and also for diagnostic purposes I have included the service registry element. Hopefully if you are familiar with using Windows Azure Service Bus relay feature the above is very familiar to you and this is a very common setup for this section. There is nothing specific to the username token implementation here. The Service Behaviour Now we come to the bit with most of the username token bits in it. When you configure the service behavior I have included the serviceCredentials element and then setup to use userNameAuthentication and you can see that I have created my own custom username token validator.   This setup means that WCF will hand off to my class for validating the username token details. I have also added the serviceSecurityAudit element to give me a simple auditing of access capability. My UsernamePassword Validator The below picture shows you the details of the username password validator class I have implemented. WCF will hand off to this class when validating the token and give me a nice way to check the token credentials against an on-premise store. You have all of the validation features with a non-service bus WCF implementation available such as validating the username password against active directory or ASP.net membership features or as in my case above something much simpler.   The Client Now let's take a look at the client side of this solution and how we can configure the client to authenticate against ACS but also send a username token over to the service component so it can implement additional security checks on-premise. I have a console application and in the program class I want to use the proxy generated with Add Service Reference to send a message via the Azure Service Bus. You can see in my WCF client configuration below I have setup my details for the azure service bus url and am using the ws2007HttpRelayBinding. Next is my configuration for the relay binding. You can see below I have configured security to use TransportWithMessageCredential so we will flow the username token with the message and also the RelayAccessToken relayClientAuthenticationType which means the component will validate against ACS before being allowed to access the relay endpoint to send a message.     After the binding we need to configure the endpoint behavior like in the below picture. This is the normal configuration to use a shared secret for accessing a Service Bus endpoint.   Finally below we have the code of the client in the console application which will call the service bus. You can see that we have created our proxy and then made a normal call to a WCF service but this time we have also set the ClientCredentials to use the appropriate username and password which will be flown through the service bus and to our service which will validate them.     Conclusion As you can see from the above walkthrough it is not too difficult to configure a service to use both a shared secret and username token at the same time. This gives you the power and protection offered by the access control service in the cloud but also the ability to flow additional tokens to the on-premise component for additional security features to be implemented. Sample The sample used in this post is available at the following location: https://s3.amazonaws.com/CSCBlogSamples/Acme.Azure.ServiceBus.Poc.UN.zip

  Read the article

• Google Analytics Filters not removing traffic from other domain

  - by Nic Hubbard

  We have a frustrating problem where someone copied our site code including our Google Analytics code. So we are getting stats logged from their site which is very frustrating. I have setup 4 Filters, each trying to disallow any traffic from this other website, but still their traffic is being shown, including on the Real Time section. Do Filters even work to exclude traffic? Here is how I have it setup: Neither of these seem to help at all.

  Read the article

• SQL Server Manageability Series: how to change the default path of .cache files of a data collector? #sql #mdw #dba

  - by ssqa.net

  How to change the default path of .cache files of a data collector after the Management Data Warehouse (MDW has been setup? This was the question asked by one of the DBAs in a client's place, instantly I enquired that were there any folder specified while setting up the MDW and obvious answer was no as there were left default. This means all the .CACHE files are stored under %C\TEMP directory which may post out of disk space problem on the server where the MDW is setup to collect. Going back...(read more)

  Read the article

• Need help with a complex 3d scene (using Ogre and bullet)

  - by Matthias

  In my setup there is a box with a hole on one side, and a freely movable "stick" (or bar, tube). This stick can be inserted/moved through the hole into the box. This hole is exactly as wide as the diameter of the stick. In reality, when you would now hold the end of the stick in your hand and move the hand left/right or up/down, the other end of the stick, which is inside the box, would move into the opposite direction of your hand movement (because the stick is affixed at the pivot point where it is entering the box through the hole). (I hope you understand what I mean so far.) Now I need to simulate such a setup in a 3d program. I have already successfully developed an Ogre3d framework for this application, including bullet. But what I don't know is how I can implement in my program what I have described above. This application must include two more features: The scene camera is attached to the end of the stick that is inserted into the box. So when the user would move the mouse (to control "his" end of the stick outside the box), then the camera attached to the stick would move in the opposite direction, as described above. The stick has some length, and the user can push it further into the box, or pull it closer to him again. That means of course that the max. radius on which the end of the stick inside the box can move depends on how far the stick is pushed into the box. Thus, the more the stick is pushed into the box, the larger the max. radius of this end of the stick with the camera will be. I understand this is maybe quite a complex thing, so I don't expect any real source code here. I already have the Ogre and bullet part as said up and running, as well as a camera attached to the stick. This works fine. What I don't know though is how I can simulate the setup described above. Especially the requirement that the stick is affixed at the position of the hole on the box, where it is inserted into the box. Any ideas how I could approach to implement the described setup?

  Read the article

• how to set power plan / power profile for battery

  - by user86274

  How can i setup different power profile settings? For example i want to set low screen brightness when i am on battery power and full brightness when i am not. From "power settings" i can setup brightness but it is persistent no matter what power i use. Is there any software that i can use to prolong my battery power when i use ubuntu? I can use my laptop at least 1 more hour when i am using windows....

  Read the article

• build my own CDN service

  - by user5332

  I have two servers, both with self domain 1st www.myexample1.com 2nd www.myexample2.com and now I would like to setup CDN of www.myexample1.com to www.myexample2.com but I dont know how setup DNS or Apache that, so both servers served files for www.myexample1.com request ... I don't need solve databases, sessions or someting else... but I need know, how to do that both server will available as www.myexample1.com

  Read the article

• What is the best toolkit for writing long technical texts?

  - by thr

  I'm looking for a toolkit in the form of one or a couple of applications that can be used to write long technical texts (such as an introduction to a programming language). What applications (or combination of) are suitable for this? How should said applications be setup (for example how would one setup MS Word to best fit writing a technical text)? How do you deal with source code, syntax coloring and formatting? In the case of it being several applications, how do you interact between them?

  Read the article

• Combining Shared Secret and Certificates

  - by Michael Stephenson

  As discussed in the introduction article this walkthrough will explain how you can implement WCF security with the Windows Azure Service Bus to ensure that you can protect your endpoint in the cloud with a shared secret but also combine this with certificates so that you can identify the sender of the message.   Prerequisites As in the previous article before going into the walk through I want to explain a few assumptions about the scenario we are implementing but to keep the article shorter I am not going to walk through all of the steps in how to setup some of this. In the solution we have a simple console application which will represent the client application. There is also the services WCF application which contains the WCF service we will expose via the Windows Azure Service Bus. The WCF Service application in this example was hosted in IIS 7 on Windows 2008 R2 with AppFabric Server installed and configured to auto-start the WCF listening services. I am not going to go through significant detail around the IIS setup because it should not matter in relation to this article however if you want to understand more about how to configure WCF and IIS for such a scenario please refer to the following paper which goes into a lot of detail about how to configure this. The link is: http://tinyurl.com/8s5nwrz   Setting up the Certificates To keep the post and sample simple I am going to use the local computer store for all certificates but this bit is really just the same as setting up certificates for an example where you are using WCF without using Windows Azure Service Bus. In the sample I have included two batch files which you can use to create the sample certificates or remove them. Basically you will end up with: A certificate called PocServerCert in the personal store for the local computer which will be used by the WCF Service component A certificate called PocClientCert in the personal store for the local computer which will be used by the client application A root certificate in the Root store called PocRootCA with its associated revocation list which is the root from which the client and server certificates were created   For the sample Im just using development certificates like you would normally, and you can see exactly how these are configured and placed in the stores from the batch files in the solution using makecert and certmgr.   The Service Component To begin with let's look at the service component and how it can be configured to listen to the service bus using a shared secret but to also accept a username token from the client. In the sample the service component is called Acme.Azure.ServiceBus.Poc.Cert.Services. It has a single service which is the Visual Studio template for a WCF service when you add a new WCF Service Application so we have a service called Service1 with its Echo method. Nothing special so far!.... The next step is to look at the web.config file to see how we have configured the WCF service. In the services section of the WCF configuration you can see I have created my service and I have created a local endpoint which I simply used to do a little bit of diagnostics and to check it was working, but more importantly there is the Windows Azure endpoint which is using the ws2007HttpRelayBinding (note that this should also work just the same if your using netTcpRelayBinding). The key points to note on the above picture are the service behavior called MyServiceBehaviour and the service bus endpoints behavior called MyEndpointBehaviour. We will go into these in more detail later.   The Relay Binding The relay binding for the service has been configured to use the TransportWithMessageCredential security mode. This is the important bit where the transport security really relates to the interaction between the service and listening to the Azure Service Bus and the message credential is where we will use our certificate like we have specified in the message/clientCrentialType attribute. Note also that we have left the relayClientAuthenticationType set to RelayAccessToken. This means that authentication will be made against ACS for accessing the service bus and messages will not be accepted from any sender who has not been authenticated by ACS.   The Endpoint Behaviour In the below picture you can see the endpoint behavior which is configured to use the shared secret client credential for accessing the service bus and also for diagnostic purposes I have included the service registry element.     Hopefully if you are familiar with using Windows Azure Service Bus relay feature the above is very familiar to you and this is a very common setup for this section. There is nothing specific to the username token implementation here. The Service Behaviour Now we come to the bit with most of the certificate stuff in it. When you configure the service behavior I have included the serviceCredentials element and then setup to use the clientCertificate check and also specifying the serviceCertificate with information on how to find the servers certificate in the store.     I have also added a serviceAuthorization section where I will implement my own authorization component to perform additional security checks after the service has validated that the message was signed with a good certificate. I also have the same serviceSecurityAudit configuration to log access to my service. My Authorization Manager The below picture shows you implementation of my authorization manager. WCF will eventually hand off the message to my authorization component before it calls the service code. This is where I can perform some logic to check if the identity is allowed to access resources. In this case I am simple rejecting messages from anyone except the PocClientCertificate.     The Client Now let's take a look at the client side of this solution and how we can configure the client to authenticate against ACS but also send a certificate over to the service component so it can implement additional security checks on-premise. I have a console application and in the program class I want to use the proxy generated with Add Service Reference to send a message via the Azure Service Bus. You can see in my WCF client configuration below I have setup my details for the azure service bus url and am using the ws2007HttpRelayBinding.   Next is my configuration for the relay binding. You can see below I have configured security to use TransportWithMessageCredential so we will flow the token from a certificate with the message and also the RelayAccessToken relayClientAuthenticationType which means the component will validate against ACS before being allowed to access the relay endpoint to send a message.     After the binding we need to configure the endpoint behavior like in the below picture. This contains the normal transportClientEndpointBehaviour to setup the ACS shared secret configuration but we have also configured the clientCertificate to look for the PocClientCert.     Finally below we have the code of the client in the console application which will call the service bus. You can see that we have created our proxy and then made a normal call to a WCF in exactly the normal way but the configuration will jump in and ensure that a token is passed representing the client certificate.     Conclusion As you can see from the above walkthrough it is not too difficult to configure a service to use both a shared secret and certificate based token at the same time. This gives you the power and protection offered by the access control service in the cloud but also the ability to flow additional tokens to the on-premise component for additional security features to be implemented. Sample The sample used in this post is available at the following location: https://s3.amazonaws.com/CSCBlogSamples/Acme.Azure.ServiceBus.Poc.Cert.zip

  Read the article

• Ubuntu ONE (Windows BETA) locks up - What to do?

  - by Zusch

  OS: Windows XP SP3 Hardware: Dell Precision M4400 (Laptop) CPU: Core2Duo T9600 Mem: 4 GB Installer- setup, first start and account- setup of UbuntuONE Windows client passed with no problems. After restart of UbuntuONE, the CPU- usage shows 50% (100% core usage). Exit- command (from context-menu) hides the trayicon, but the program is still working excessive in background (50% cpu- / 50 MB memory- usage), until UbuntuOneClient.exe is killed by the taskmanager. What's going on ?

  Read the article

• What forms of non-interactive RPG battle systems exist?

  - by Landstander

  I am interested in systems that allow players to develop a battle plan or setup strategy for the party or characters prior to entering battle. During the battle the player either cannot input commands or can choose not to. Rule Based In this system the player can setup a list of rules in the form of [Condition - Action] that are then ordered by priority. Gambits in Final Fantasy XII Tactics in Dragon Age Origin & II

  Read the article

• Oracle VDI thin client terminal and Synergy

  - by katsumii

  I use my main laptop and old SunRay thin client hardware at my office.I set up Synergy for keyboard/mouse/clipboard sharing and I thought I hit this issue.  Bug #3002 - Mouse Pointer Invisible on Client PC - SynergyRDP and a thin client setup I found this workaround. Turning "Display pointer trails" on somehow made mymouse appear on thin client side.  This may or may not work in different kind of Oracle VDI setup or other vendors' thin client. 

  Read the article

• how to disable luks partition from showing up in nautlus panel

  - by yemu

  I have a luks setup with encrypted partition. And I don't want everyone on my computer to see that I have such partition. Unfortunately it shows up in the nautilus "devices" panel as "Encrypted partition". Is there a way to prevent it from showing there? I plan to setup authentication with a keyfile on usb, but for now I can live without the gnome authentication dialog, and open and mount the partition from command line.

  Read the article

• Running MS Access Programs

  - by fredhappier

  I have an old program developed in MS Access and would like to convert it to Kexi somehow. The program on Windows is launched with Access. Is there any way that Kexi can launch this program? I know my way around Ubuntu and the terminal, but not well versed on databases. Once you make something in Kexi how do you "run" it or "view" what you've made? So far I am able to import the MDB file into Kexi and see all of the database data, but that is as far I have gone. The program was made by a relative years ago for my dad. I myself am an Ubuntu only user for 6+ years now and have no intentions to touch Windows and am looking for a linux solution. My dad is also an Ubuntu user, hence why Im looking for a solution. If Kexi cannot launch and run an MDB file, what else can I try? Anything browser based? Any tips or direction would be extremely helpful. I spoke to my brother who originally made the program. I told him about Kexi and here is what he said. Does any of this make sense? Thanks. This is how I would try to get them to work: Stand alone setup - after import, look for an option where you designate which form object you want to open upon startup. It might be in the tools tab in the picture below. After you save that change, it re-start it and it should work. Front end/back end setup - Do what I suggested for the stand alone setup to the "front-end" MDB file. After you do that, put the other file (table MDB file) where you want it to reside on the network. Now, open back up the "front end" file and look for an option that will allow you to "connect" to those tables in the other file. It looks like it could be in the "External data" tab in the picture below. For this setup, you may need to do these two tasks in the reverse order I just mentioned. Thanks! Fred

  Read the article

• Should I use the ATI proprietary or free drivers with two Crossfire HD5850s?

  - by Dekel

  I own 2 XFX Radeon HD 5850 in crossfire configuration connected to 3 24" monitors. I really want to make Ubuntu my daily OS but can't seem to find the best configuration to use. Some threads say that the free driver is better then the ATI one and some say the new Catalyst fully takes advantage of the card capabilities. Anyone out there with a similar setup? What are your recommendations for a good production in 12.04 setup?

  Read the article

• How to backup/restore full-disk encryption ubuntu 11.10?

  - by ggc

  How to backup/restore full-disk encryption ubuntu 11.10? I would like to put the RAW encrypted file system and restore on another computer. Encryption Details: crypt setup via Ubuntu alterate CD Installer only thing unencrypted is /boot File systems setup: boot- j swap-swap everything else-ext 4 Any suggestions? I have considered backing up the file system stripped of encryption, but I would prefer to keep the os encrypted while transferring. Thanks for any help!

  Read the article

• MySQL: Functional Partitioning

  This article contains common different methods of functional partitioning and common considerations for database setup and capacity. Company DBAs, database developers, engineers and architects should consider the pros and cons of any method of sharding or partitioning since compromises will have to be made given the pros and cons of a system setup.

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >