current - Page 114 - Developer IT

How to Play FLAC Files in Windows 7 Media Center & Player

- by Mysticgeek

An annoyance for music lovers who enjoy FLAC format, is there’s no native support for WMP or WMC. If you’re a music enthusiast who prefers FLAC format, we’ll look at adding support to Windows 7 Media Center and Player. For the following article we are using Windows 7 Home Premium 32-bit edition. Download and Install madFLAC v1.8 The first thing we need to do is download and install the madFLAC v1.8 decoder (link below). Just unzip the file and run install.bat… You’ll get a message that it has been successfully registered, click Ok. To verify everything is working, open up one of your FLAC files with WMP, and you’ll get the following message. Check the box Don’t ask me again for this extension and click Yes. Now Media Player should play the track you’ve chosen. Delete Current Music Library But what if you want to add your entire collection of FLAC files to the Library? If you already have it set up as your default music player, unfortunately we need to remove the current library and delete the database. The best way to manage the music library in Windows 7 is via WMP 12. Since we don’t want to delete songs from the computer we need to Open WMP, press “Alt+T” and navigate to Tools \ Options \ Library. Now uncheck the box Delete files from computer when deleted from library and click Ok. Now in your Library click “Ctrl + A” to highlight all of the songs in the Library, then hit the “Delete” key. If you have a lot of songs in your library (like on our system) you’ll see the following dialog box while it collects all of the information. After all of the data is collected, make sure the radio button next to Delete from library only is marked and click Ok. Again you’ll see the Working progress window while the songs are deleted. Deleting Current Database Now we need to make sure we’re starting out fresh. Close out of Media Player, then we’ll basically follow the same directions The Geek pointed out for fixing the WMP Library. Click on Start and type in services.msc into the search box and hit Enter. Now scroll down and stop the service named Windows Media Player Network Sharing Service. Now, navigate to the following directory and the main file to delete CurrentDatabase_372.wmdb %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Player\ Again, the main file to delete is CurrentDatabase_372.wmdb, though if you want, you can delete them all. If you’re uneasy about deleting these files, make sure to back them up first. Now after you restart WMP you can begin adding your FLAC files. For those of us with large collections, it’s extremely annoying to see WMP try to pick up all of your media by default. To delete the other directories go to Organize \ Manage Libraries then open the directories you want to remove. For example here we’re removing the default libraries it tries to check for music. Remove the directories you don’t want it to gather contents from in each of the categories. We removed all of the other collections and only added the FLAC music directory from our home server. SoftPointer Tag Support Plugin Even though we were able to get FLAC files to play in WMP and WMC at this point, there’s another utility from SoftPointer to add. It enables FLAC (and other file formats) to be picked up in the library much easier. It has a long name but is effective –M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center (link below). Just install it by accepting the defaults, and you’ll be glad you did. After installing it, and re-launching Media Player, give it some time to collect all of the data from your FLAC directory…it can take a while. In fact, if your collection is huge, just walk away and let it do its thing. If you try to use it right away, WMP slows down considerably while updating the library. Once the library is setup you’ll be able to play your FLAC tunes in Windows 7 Media Center as well and Windows Media Player 12. Album Art One caveat is that some of our albums didn’t show any cover art. But we were usually able to get it by right-clicking the album and selecting Find album info. Then confirming the album information is correct… Conclusion Although this seems like several steps to go through to play FLAC files in Windows 7 Media Center and Player, it seems to work really well after it’s set up. We haven’t tried this with a 64-bit machine, but the process should be similar, but you might want to make sure the codecs you use are 64-bit. We’re sure there are other methods out there that some of you use, and if so leave us a comment and tell us about it. Download madFlac V1.8 M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center from SoftPointer Similar Articles Productive Geek Tips How to Play .OGM Video Files in Windows VistaFixing When Windows Media Player Library Won’t Let You Add FilesUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Kantaris is a Unique Media Player Based on VLCEasily Change Audio File Formats with XRECODE TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7?

Read the article

The Interaction between Three-Tier Client/Server Model and Three-Tier Application Architecture Model

The three-tier client/server model is a network architectural approach currently used in modern networking. This approach divides a network in to three distinct components. Three-Tier Client/Server Model Components Client Component Server Component Database Component The Client Component of the network typically represents any device on the network. A basic example of this would be computer or another network/web enabled devices that are connected to a network. Network clients request resources on the network, and are usually equipped with a user interface for the presentation of the data returned from the Server Component. This process is done through the use of various software clients, and example of this can be seen through the use of a web browser client. The web browser request information from the Server Component located on the network and then renders the results for the user to process. The Server Components of the network return data based on specific client request back to the requesting client. Server Components also inherit the attributes of a Client Component in that they are a device on the network and that they can also request information from other Server Components. However what differentiates a Client Component from a Server Component is that a Server Component response to requests from devices on the network. An example of a Server Component can be seen in a web server. A web server listens for new requests and then interprets the request, processes the web pages, and then returns the processed data back to the web browser client so that it may render the data for the user to interpret. The Database Component of the network returns unprocessed data from databases or other resources. This component also inherits attributes from the Server Component in that it is a device on a network, it can request information from other server components and database components, and it also listens for new requests so that it can return data when needed. The three-tier client/server model is very similar to the three-tier application architecture model, and in fact the layers can be mapped to one another. Three-Tier Application Architecture Model Presentation Layer/Logic Business Layer/Logic Data Layer/Logic The Presentation Layer including its underlying logic is very similar to the Client Component of the three-tiered model. The Presentation Layer focuses on interpreting the data returned by the Business Layer as well as presents the data back to the user. Both the Presentation Layer and the Client Component focus primarily on the user and their experience. This allows for segments of the Business Layer to be distributable and interchangeable because the Presentation Layer is not directly integrated in with Business Layer. The Presentation Layer does not care where the data comes from as long as it is in the proper format. This allows for the Presentation Layer and Business Layer to be stored on one or more different servers so that it can provide a higher availability to clients requesting data. A good example of this is a web site that uses load balancing. When a web site decides to take on the task of load balancing they must obtain a network device that sits in front of a one or machines in order to distribute the request across multiple servers. When a user comes in through the load balanced device they are redirected to a specific server based on a few factors. Common Load Balancing Factors Current Server Availability Current Server Response Time Current Server Priority The Business Layer and corresponding logic are business rules applied to data prior to it being sent to the Presentation Layer. These rules are used to manipulate the data coming from the Data Access Layer, in addition to validating any data prior to being stored in the Data Access Layer. A good example of this would be when a user is trying to create multiple accounts under one email address. The Business Layer logic can prevent duplicate accounts by enforcing a unique email for every new account before the data is even stored in the Data Access Layer. The Server Component can be directly tied to this layer in that the server typically stores and process the Business Layer before it is returned to the end-user via the Presentation Layer. In addition the Server Component can also run automated process through the Business Layer on the data in the Data Access Layer so that additional business analysis can be derived from the data that has been already collected. The Data Layer and its logic are responsible for storing information so that it can be easily retrieved. Typical in most modern applications data is stored in a database management system however data can also be in the form of files stored on a file server. In addition a database can take on one of several forms. Common Database Formats XML File Pipe Delimited File Tab Delimited File Comma Delimited File (CSV) Plain Text File Microsoft Access Microsoft SQL Server MySql Oracle Sybase The Database component of the Networking model can be directly tied to the Data Layer because this is where the Data Layer obtains the data to return back the Business Layer. The Database Component basically allows for a place on the network to store data for future use. This enables applications to save data when they can and then quickly recall the saved data as needed so that the application does not have to worry about storing the data in memory. This prevents overhead that could be created when an application must retain all data in memory. As you can see the Three-Tier Client/Server Networking Model and the Three-Tiered Application Architecture Model rely very heavily on one another to function especially if different aspects of an application are distributed across an entire network. The use of various servers and database servers are wonderful when an application has a need to distribute work across the network. Network Components and Application Layers Interaction Database components will store all data needed for the Data Access Layer to manipulate and return to the Business Layer Server Component executes the Business Layer that manipulates data so that it can be returned to the Presentation Layer Client Component hosts the Presentation Layer that interprets the data and present it to the user

Read the article

Figuring out the IIS Version for a given OS in .NET Code

- by Rick Strahl

Here's an odd requirement: I need to figure out what version of IIS is available on a given machine in order to take specific configuration actions when installing an IIS based application. I build several configuration tools for application configuration and installation and depending on which version of IIS is available on IIS different configuration paths are taken. For example, when dealing with XP machine you can't set up an Application Pool for an application because XP (IIS 5.1) didn't support Application pools. Configuring 32 and 64 bit settings are easy in IIS 7 but this didn't work in prior versions and so on. Along the same lines I saw a question on the AspInsiders list today, regarding a similar issue where somebody needed to know the IIS version as part of an ASP.NET application prior to when the Request object is available. So it's useful to know which version of IIS you can possibly expect. This should be easy right? But it turns there's no real easy way to detect IIS on a machine. There's no registry key that gives you the full version number - you can detect installation but not which version is installed. The easiest way: Request.ServerVariables["SERVER_SOFTWARE"] The easiest way to determine IIS version number is if you are already running inside of ASP.NET and you are inside of an ASP.NET request. You can look at Request.ServerVariables["SERVER_SOFTWARE"] to get a string like Microsoft-IIS/7.5 returned to you. It's a cinch to parse this to retrieve the version number. This works in the limited scenario where you need to know the version number inside of a running ASP.NET application. Unfortunately this is not a likely use case, since most times when you need to know a specific version of IIS when you are configuring or installing your application. The messy way: Match Windows OS Versions to IIS Versions Since Version 5.x of IIS versions of IIS have always been tied very closely to the Operating System. Meaning the only way to get a specific version of IIS was through the OS - you couldn't install another version of IIS on the given OS. Microsoft has a page that describes the OS version to IIS version relationship here: http://support.microsoft.com/kb/224609 In .NET you can then sniff the OS version and based on that return the IIS version. The following is a small utility function that accomplishes the task of returning an IIS version number for a given OS: /// <summary> /// Returns the IIS version for the given Operating System. /// Note this routine doesn't check to see if IIS is installed /// it just returns the version of IIS that should run on the OS. /// /// Returns the value from Request.ServerVariables["Server_Software"] /// if available. Otherwise uses OS sniffing to determine OS version /// and returns IIS version instead. /// </summary> /// <returns>version number or -1 </returns> public static decimal GetIisVersion() { // if running inside of IIS parse the SERVER_SOFTWARE key // This would be most reliable if (HttpContext.Current != null && HttpContext.Current.Request != null) { string os = HttpContext.Current.Request.ServerVariables["SERVER_SOFTWARE"]; if (!string.IsNullOrEmpty(os)) { //Microsoft-IIS/7.5 int dash = os.LastIndexOf("/"); if (dash > 0) { decimal iisVer = 0M; if (Decimal.TryParse(os.Substring(dash + 1), out iisVer)) return iisVer; } } } decimal osVer = (decimal) Environment.OSVersion.Version.Major + ((decimal) Environment.OSVersion.Version.MajorRevision / 10); // Windows 7 and Win2008 R2 if (osVer == 6.1M) return 7.5M; // Windows Vista and Windows 2008 else if (osVer == 6.0M) return 7.0M; // Windows 2003 and XP 64 bit else if (osVer == 5.2M) return 6.0M; // Windows XP else if (osVer == 5.1M) return 5.1M; // Windows 2000 else if (osVer == 5.0M) return 5.0M; // error result return -1M; } } Talk about a brute force apporach, but it works. This code goes only back to IIS 5 - anything before that is not something you possibly would want to have running. :-) Note that this is updated through Windows 7/Windows Server 2008 R2. Later versions will need to be added as needed. Anybody know what the Windows Version number of Windows 8 is?© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET IIS Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

CQRS – Questions and Concerns

- by Dylan Smith

I’ve been doing a lot of learning on CQRS and Event Sourcing over the last little while and I have a number of questions that I haven’t been able to answer. 1. What is the benefit of CQRS when compared to a typical DDD architecture that uses Event Sourcing and properly captures intent and behavior via verb-based commands? (other than Scalability) 2. When using CQRS what do you do with complex query-based logic? I’m going to elaborate on #1 in this blog post and I’ll do a follow-up post on #2. I watched through Greg Young’s video on the business benefits of CQRS + Event Sourcing and first let me say that I thought it was an excellent presentation that really drives home a lot of the benefits to this approach to architecture (I watched it twice in a row I enjoyed it so much!). But it didn’t answer some of my questions fully (I wish I had been there to ask these of Greg in person!). So let me pick apart some of the points he makes and how they relate to my first question above. I’m completely sold on the idea of event sourcing and have a clear understanding of the benefits that it brings to the table, so I’m not going to question that. But you can use event sourcing without going to a CQRS architecture, so my main question is around the benefits of CQRS + Event Sourcing vs Event Sourcing + Typical DDD architecture Architecture with Event Sourcing + Commands on Left, CQRS on Right Greg talks about how the stereotypical architecture doesn’t support DDD, but is that only because his diagram shows DTO’s coming up from the client. If we use the same diagram but allow the client to send commands doesn’t that remove a lot of the arguments that Greg makes against the stereotypical architecture? We can now introduce verbs into the system. We can capture intent now (storing it still requires event sourcing, but you can implement event sourcing without doing CQRS) We can create a rich domain model (as opposed to an anemic domain model) Scalability is obviously a benefit that CQRS brings to the table, but like Greg says, very few of the systems we create truly need significant scalability Greg talks about the ability to scale your development efforts. He says CQRS allows you to split the system into 3 parts (Client, Domain/Commands, Reads) and assign 3 teams of developers to work on them in parallel; letting you scale your development efforts by 3x with nearly linear gains. But in the stereotypical architecture don’t you already have 2 separate modules that you can split your dev efforts between: The client that sends commands/queries and receives DTO’s, and the Domain which accepts commands/queries, and generates events/DTO’s. If this is true it’s not really a 3x scaling you achieve with CQRS but merely a 1.5x scaling which while great doesn’t sound nearly as dramatic (“I can do it with 10 devs in 12 months – let me hire 5 more and we can have it done in 8 months”). Making the Query side “stupid simple” such that you can assign junior developers (or even outsource it) sounds like a valid benefit, but I have some concerns over what you do with complex query-based logic/behavior. I’m going to go into more detail on this in a follow-up blog post shortly. He also seemed to focus on how “stupid-simple” it is doing queries against the de-normalized data store, but I imagine there is still significant complexity in the event handlers that interpret the events and apply them to the de-normalized tables. It sounds like Greg suggests that because we’re doing CQRS that allows us to apply Event Sourcing when we otherwise wouldn’t be able to (~33:30 in the video). I don’t believe this is true. I don’t see why you wouldn’t be able to apply Event Sourcing without separating out the Commands and Queries. The queries would just operate against the domain model instead of the database. But you’d still get the benefits of Event Sourcing. Without CQRS the queries would only be able to operate against the current state rather than the event history, but even in CQRS the domain behaviors can only operate against the current state and I don’t see that being a big limiting factor. If some query needs to operate against something that is not captured by the current state you would just have to update the domain model to capture that information (no different than if that statement were made about a Command under CQRS). Some of the benefits I do see being applicable are that your domain model might end up being simpler/smaller since it only needs to represent the state needed to process commands and not worry about the reads (like the Deactivate Inventory Item and associated comment example that Greg provides). And also commands that can be handled in a Transaction Script style manner by the command handler simply generating events and not touching the domain model. It also makes it easier for your senior developers to focus on the command behavior and ignore the queries, which is usually going to be a better use of their time. And of course scalability. If anybody out there has any thoughts on this and can help educate me further, please either leave a comment or feel free to get in touch with me via email:

Read the article

Windows Azure Use Case: Hybrid Applications

- by BuckWoody

This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Description: Organizations see the need for computing infrastructures that they can “rent” or pay for only when they need them. They also understand the benefits of distributed computing, but do not want to create this infrastructure themselves. However, they may have considerations that prevent them from moving all of their current IT investment to a distributed environment: Private data (do not want to send or store sensitive data off-site) High dollar investment in current infrastructure Applications currently running well, but may need additional periodic capacity Current applications not designed in a stateless fashion In these situations, a “hybrid” approach works best. In fact, with Windows Azure, a hybrid approach is an optimal way to implement distributed computing even when the stipulations above do not apply. Keeping a majority of the computing function in an organization local while exploring and expanding that footprint into Windows and SQL Azure is a good migration or expansion strategy. A “hybrid” architecture merely means that part of a computing cycle is shared between two architectures. For instance, some level of computing might be done in a Windows Azure web-based application, while the data is stored locally at the organization. Implementation: There are multiple methods for implementing a hybrid architecture, in a spectrum from very little interaction from the local infrastructure to Windows or SQL Azure. The patterns fall into two broad schemas, and even these can be mixed. 1. Client-Centric Hybrid Patterns In this pattern, programs are coded such that the client system sends queries or compute requests to multiple systems. The “client” in this case might be a web-based codeset actually stored on another system (which acts as a client, the user’s device serving as the presentation layer) or a compiled program. In either case, the code on the client requestor carries the burden of defining the layout of the requests. While this pattern is often the easiest to code, it’s the most brittle. Any change in the architecture must be reflected on each client, but this can be mitigated by using a centralized system as the client such as in the web scenario. 2. System-Centric Hybrid Patterns Another approach is to create a distributed architecture by turning on-site systems into “services” that can be called from Windows Azure using the service Bus or the Access Control Services (ACS) capabilities. Code calls from a series of in-process client application. In this pattern you move the “client” interface into the server application logic. If you do not wish to change the application itself, you can “layer” the results of the code return using a product (such as Microsoft BizTalk) that exposes a Web Services Definition Language (WSDL) endpoint to Windows Azure using the Application Fabric. In effect, this is similar to creating a Service Oriented Architecture (SOA) environment, and has the advantage of de-coupling your computing architecture. If each system offers a “service” of the results of some software processing, the operating system or platform becomes immaterial, assuming it adheres to a service contract. There are important considerations when you federate a system, whether to Windows or SQL Azure or any other distributed architecture. While these considerations are consistent with coding any application for distributed computing, they are especially important for a hybrid application. Connection resiliency - Applications on-premise normally have low-latency and good connection properties, something you’re not always guaranteed in a distributed and hybrid application. Whether a centralized client or a distributed one, the code should be able to handle extended retry logic. Authorization and Access - In a single authorization environment like a Active Directory domain, security is handled at a user-password level. In a distributed computing environment, you have more options. You can mitigate this with using The Windows Azure Application Fabric feature of ACS to make the Azure application aware of the App Fabric as an ADFS provider. However, a claims-based authentication structure is often a superior choice. Consistency and Concurrency - When you have a Relational Database Management System (RDBMS), Consistency and Concurrency are part of the design. In a Service Architecture, you need to plan for sequential message handling and lifecycle. Resources: How to Build a Hybrid On-Premise/In Cloud Application: http://blogs.msdn.com/b/ignitionshowcase/archive/2010/11/09/how-to-build-a-hybrid-on-premise-in-cloud-application.aspx General Architecture guidance: http://blogs.msdn.com/b/buckwoody/archive/2010/12/21/windows-azure-learning-plan-architecture.aspx

Read the article

ASP.NET MVC 3 Hosting :: ASP.NET MVC 3 First Look

- by mbridge

MVC 3 View Enhancements MVC 3 introduces two improvements to the MVC view engine: - Ability to select the view engine to use. MVC 3 allows you to select from any of your installed view engines from Visual Studio by selecting Add > View (including the newly introduced ASP.NET “Razor” engine”): - Support for the next ASP.NET “Razor” syntax. The newly previewed Razor syntax is a concise lightweight syntax. MVC 3 Control Enhancements - Global Filters: ASP.NET MVC 3 allows you to specify that a filter which applies globally to all Controllers within an app by adding it to the GlobalFilters collection. The RegisterGlobalFilters() method is now included in the default Global.asax class template and so provides a convenient place to do this since is will then be called by the Application_Start() method: void RegisterGlobalFilters(GlobalFilterCollection filters) { filters.Add(new HandleLoggingAttribute()); filters.Add(new HandleErrorAttribute()); } void Application_Start() { RegisterGlobalFilters (GlobalFilters.Filters); } - Dynamic ViewModel Property : MVC 3 augments the ViewData API with a new “ViewModel” property on Controller which is of type “dynamic” – and therefore enables you to use the new dynamic language support in C# and VB pass ViewData items using a cleaner syntax than the current dictionary API. Public ActionResult Index() { ViewModel.Message = "Hello World"; return View(); } - New ActionResult Types : MVC 3 includes three new ActionResult types and helper methods: 1. HttpNotFoundResult – indicates that a resource which was requested by the current URL was not found. HttpNotFoundResult will return a 404 HTTP status code to the calling client. 2. PermanentRedirects – The HttpRedirectResult class contains a new Boolean “Permanent” property which is used to indicate that a permanent redirect should be done. Permanent redirects use a HTTP 301 status code. The Controller class includes three new methods for performing these permanent redirects: RedirectPermanent(), RedirectToRoutePermanent(), andRedirectToActionPermanent(). All of these methods will return an instance of the HttpRedirectResult object with the Permanent property set to true. 3. HttpStatusCodeResult – used for setting an explicit response status code and its associated description. MVC 3 AJAX and JavaScript Enhancements MVC 3 ships with built-in JSON binding support which enables action methods to receive JSON-encoded data and then model-bind it to action method parameters. For example a jQuery client-side JavaScript could define a “save” event handler which will be invoked when the save button is clicked on the client. The code in the event handler then constructs a client-side JavaScript “product” object with 3 fields with their values retrieved from HTML input elements. Finally, it uses jQuery’s .ajax() method to POST a JSON based request which contains the product to a /theStore/UpdateProduct URL on the server: $('#save').click(function () { var product = { ProdName: $('#Name').val() Price: $('#Price').val(), } $.ajax({ url: '/theStore/UpdateProduct', type: "POST"; data: JSON.stringify(widget), datatype: "json", contentType: "application/json; charset=utf-8", success: function () { $('#message').html('Saved').fadeIn(), }, error: function () { $('#message').html('Error').fadeIn(), } }); return false; }); MVC will allow you to implement the /theStore/UpdateProduct URL on the server by using an action method as below. The UpdateProduct() action method will accept a strongly-typed Product object for a parameter. MVC 3 can now automatically bind an incoming JSON post value to the .NET Product type on the server without having to write any custom binding. [HttpPost] public ActionResult UpdateProduct(Product product) { // save logic here return null } MVC 3 Model Validation Enhancements MVC 3 builds on the MVC 2 model validation improvements by adding support for several of the new validation features within the System.ComponentModel.DataAnnotations namespace in .NET 4.0: - Support for the new DataAnnotations metadata attributes like DisplayAttribute. - Support for the improvements made to the ValidationAttribute class which now supports a new IsValid overload that provides more info on the current validation context, like what object is being validated. - Support for the new IValidatableObject interface which enables you to perform model-level validation and also provide validation error messages which are specific to the state of the overall model. MVC 3 Dependency Injection Enhancements MVC 3 includes better support for applying Dependency Injection (DI) and also integrating with Dependency Injection/IOC containers. Currently MVC 3 Preview 1 has support for DI in the below places: - Controllers (registering & injecting controller factories and injecting controllers) - Views (registering & injecting view engines, also for injecting dependencies into view pages) - Action Filters (locating and injecting filters) And this is another important blog about Microsoft .NET and technology: - Windows 2008 Blog - SharePoint 2010 Blog - .NET 4 Blog And you can visit here if you're looking for ASP.NET MVC 3 hosting

Read the article

WebLogic Server JMS WLST Script – Who is Connected To My Server

- by james.bayer

Ever want to know who was connected to your WebLogic Server instance for troubleshooting? An email exchange about this topic and JMS came up this week, and I’ve heard it come up once or twice before too. Sometimes it’s interesting or helpful to know the list of JMS clients (IP Addresses, JMS Destinations, message counts) that are connected to a particular JMS server. This can be helpful for troubleshooting. Tom Barnes from the WebLogic Server JMS team provided some helpful advice: The JMS connection runtime mbean has “getHostAddress”, which returns the host address of the connecting client JVM as a string. A connection runtime can contain session runtimes, which in turn can contain consumer runtimes. The consumer runtime, in turn has a “getDestinationName” and “getMemberDestinationName”. I think that this means you could write a WLST script, for example, to dump all consumers, their destinations, plus their parent session’s parent connection’s host addresses. Note that the client runtime mbeans (connection, session, and consumer) won’t necessarily be hosted on the same JVM as a destination that’s in the same cluster (client messages route from their connection host to their ultimate destination in the same cluster). Writing the Script So armed with this information, I decided to take the challenge and see if I could write a WLST script to do this. It’s always helpful to have the WebLogic Server MBean Reference handy for activities like this. This one is focused on JMS Consumers and I only took a subset of the information available, but it could be modified easily to do Producers. I haven’t tried this on a more complex environment, but it works in my simple sandbox case, so it should give you the general idea. # Better to use Secure Config File approach for login as shown here http://buttso.blogspot.com/2011/02/using-secure-config-files-with-weblogic.html connect('weblogic','welcome1','t3://localhost:7001') # Navigate to the Server Runtime and get the Server Name serverRuntime() serverName = cmo.getName() # Multiple JMS Servers could be hosted by a single WLS server cd('JMSRuntime/' + serverName + '.jms' ) jmsServers=cmo.getJMSServers() # Find the list of all JMSServers for this server namesOfJMSServers = '' for jmsServer in jmsServers: namesOfJMSServers = jmsServer.getName() + ' ' # Count the number of connections jmsConnections=cmo.getConnections() print str(len(jmsConnections)) + ' JMS Connections found for ' + serverName + ' with JMSServers ' + namesOfJMSServers # Recurse the MBean tree for each connection and pull out some information about consumers for jmsConnection in jmsConnections: try: print 'JMS Connection:' print ' Host Address = ' + jmsConnection.getHostAddress() print ' ClientID = ' + str( jmsConnection.getClientID() ) print ' Sessions Current = ' + str( jmsConnection.getSessionsCurrentCount() ) jmsSessions = jmsConnection.getSessions() for jmsSession in jmsSessions: jmsConsumers = jmsSession.getConsumers() for jmsConsumer in jmsConsumers: print ' Consumer:' print ' Name = ' + jmsConsumer.getName() print ' Messages Received = ' + str(jmsConsumer.getMessagesReceivedCount()) print ' Member Destination Name = ' + jmsConsumer.getMemberDestinationName() except: print 'Error retrieving JMS Consumer Information' dumpStack() # Cleanup disconnect() exit() Example Output I expect the output to look something like this and loop through all the connections, this is just the first one: 1 JMS Connections found for AdminServer with JMSServers myJMSServer JMS Connection: Host Address = 127.0.0.1 ClientID = None Sessions Current = 16 Consumer: Name = consumer40 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Notice that it has the IP Address of the client. There are 16 Sessions open because I’m using an MDB, which defaults to 16 connections, so this matches what I expect. Let’s see what the full output actually looks like: D:\Oracle\fmw11gr1ps3\user_projects\domains\offline_domain>java weblogic.WLST d:\temp\jms.py Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'AdminServer' that belongs to domain 'offline_domain'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. Location changed to serverRuntime tree. This is a read-only tree with ServerRuntimeMBean as the root. For more help, use help(serverRuntime) 1 JMS Connections found for AdminServer with JMSServers myJMSServer JMS Connection: Host Address = 127.0.0.1 ClientID = None Sessions Current = 16 Consumer: Name = consumer40 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer34 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer37 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer16 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer46 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer49 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer43 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer55 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer25 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer22 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer19 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer52 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer31 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer58 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer28 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer61 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Disconnected from weblogic server: AdminServer Exiting WebLogic Scripting Tool. Thanks to Tom Barnes for the hints and the inspiration to write this up. Image of telephone switchboard courtesy of http://www.JoeTourist.net/ JoeTourist InfoSystems

Read the article

Advanced donut caching: using dynamically loaded controls

- by DigiMortal

Yesterday I solved one caching problem with local community portal. I enabled output cache on SharePoint Server 2007 to make site faster. Although caching works fine I needed to do some additional work because there are some controls that show different content to different users. In this example I will show you how to use “donut caching” with user controls – powerful way to drive some content around cache. About donut caching Donut caching means that although you are caching your content you have some holes in it so you can still affect the output that goes to user. By example you can cache front page on your site and still show welcome message that contains correct user name. To get better idea about donut caching I suggest you to read ScottGu posting Tip/Trick: Implement "Donut Caching" with the ASP.NET 2.0 Output Cache Substitution Feature. Basically donut caching uses ASP.NET substitution control. In output this control is replaced by string you return from static method bound to substitution control. Again, take a look at ScottGu blog posting I referred above. Problem If you look at Scott’s example it is pretty plain and easy by its output. All it does is it writes out current user name as string. Here are examples of my login area for anonymous and authenticated users: It is clear that outputting mark-up for these views as string is pretty lame to implement in code at string level. Every little change in design will end up with new version of controls library because some parts of design “live” there. Solution: using user controls I worked out easy solution to my problem. I used cache substitution and user controls together. I have three user controls: LogInControl – this is the proxy control that checks which “real” control to load. AnonymousLogInControl – template and logic for anonymous users login area. AuthenticatedLogInControl – template and logic for authenticated users login area. This is the control we render for each user separately because it contains user name and user profile fill percent. Anonymous control is not very interesting because it is only about keeping mark-up in separate file. Interesting parts are LogInControl and AuthenticatedLogInControl. Creating proxy control The first thing was to create control that has substitution area where “real” control is loaded. This proxy control should also be available to decide which control to load. The definition of control is very primitive. <%@ Control EnableViewState="false" Inherits="MyPortal.Profiles.LogInControl" %> <asp:Substitution runat="server" MethodName="ShowLogInBox" /> But code is a little bit tricky. Based on current user instance we decide which login control to load. Then we create page instance and load our control through it. When control is loaded we will call DataBind() method. In this method we evaluate all fields in loaded control (it was best choice as Load and other events will not be fired). Take a look at the code. public static string ShowLogInBox(HttpContext context) { var user = SPContext.Current.Web.CurrentUser; string controlName; if (user != null) controlName = "AuthenticatedLogInControl.ascx"; else controlName = "AnonymousLogInControl.ascx"; var path = "~/_controltemplates/" + controlName; var output = new StringBuilder(10000); using(var page = new Page()) using(var ctl = page.LoadControl(path)) using(var writer = new StringWriter(output)) using(var htmlWriter = new HtmlTextWriter(writer)) { ctl.DataBind(); ctl.RenderControl(htmlWriter); } return output.ToString(); } When control is bound to data we ask to render it its contents to StringBuilder. Now we have the output of control as string and we can return it from our method. Of course, notice how correct I am with resources disposing. :) The method that returns contents for substitution control is static method that has no connection with control instance because hen page is read from cache there are no instances of controls available. Conclusion As you saw it was not very hard to use donut caching with user controls. Instead of writing mark-up of controls to static method that is bound to substitution control we can still use our user controls.

Read the article

ASP.NET WebAPI Security 2: Identity Architecture

- by Your DisplayName here!

Pedro has beaten me to the punch with a detailed post (and diagram) about the WebAPI hosting architecture. So go read his post first, then come back so we can have a closer look at what that means for security. The first important takeaway is that WebAPI is hosting independent- currently it ships with two host integration implementations – one for ASP.NET (aka web host) and WCF (aka self host). Pedro nicely shows the integration into the web host. Self hosting is not done yet so we will mainly focus on the web hosting case and I will point out security related differences when they exist. The interesting part for security (amongst other things of course) is the HttpControllerHandler (see Pedro’s diagram) – this is where the host specific representation of an HTTP request gets converted to the WebAPI abstraction (called HttpRequestMessage). The ConvertRequest method does the following: Create a new HttpRequestMessage. Copy URI, method and headers from the HttpContext. Copies HttpContext.User to the Properties<string, object> dictionary on the HttpRequestMessage. The key used for that can be found on HttpPropertyKeys.UserPrincipalKey (which resolves to “MS_UserPrincipal”). So the consequence is that WebAPI receives whatever IPrincipal has been set by the ASP.NET pipeline (in the web hosting case). Common questions are: Are there situations where is property does not get set? Not in ASP.NET – the DefaultAuthenticationModule in the HTTP pipeline makes sure HttpContext.User (and Thread.CurrentPrincipal – more on that later) are always set. Either to some authenticated user – or to an anonymous principal. This may be different in other hosting environments (again more on that later). Why so generic? Keep in mind that WebAPI is hosting independent and may run on a host that materializes identity completely different compared to ASP.NET (or .NET in general). This gives them a way to evolve the system in the future. How does WebAPI code retrieve the current client identity? HttpRequestMessage has an extension method called GetUserPrincipal() which returns the property as an IPrincipal. A quick look at self hosting shows that the moral equivalent of HttpControllerHandler.ConvertRequest() is HttpSelfHostServer.ProcessRequestContext(). Here the principal property gets only set when the host is configured for Windows authentication (inconsisteny). Do I like that? Well – yes and no. Here are my thoughts: I like that it is very straightforward to let WebAPI inherit the client identity context of the host. This might not always be what you want – think of an ASP.NET app that consists of UI and APIs – the UI might use Forms authentication, the APIs token based authentication. So it would be good if the two parts would live in a separate security world. It makes total sense to have this generic hand off point for identity between the host and WebAPI. It also makes total sense for WebAPI plumbing code (especially handlers) to use the WebAPI specific identity abstraction. But – c’mon we are running on .NET. And the way .NET represents identity is via IPrincipal/IIdentity. That’s what every .NET developer on this planet is used to. So I would like to see a User property of type IPrincipal on ApiController. I don’t like the fact that Thread.CurrentPrincipal is not populated. T.CP is a well established pattern as a one stop shop to retrieve client identity on .NET. That makes a lot of sense – even if the name is misleading at best. There might be existing library code you want to call from WebAPI that makes use of T.CP (e.g. PrincipalPermission, or a simple .Name or .IsInRole()). Having the client identity as an ambient property is useful for code that does not have access to the current HTTP request (for calling GetUserPrincipal()). I don’t like the fact that that the client identity conversion from host to WebAPI is inconsistent. This makes writing security plumbing code harder. I think the logic should always be: If the host has a client identity representation, copy it. If not, set an anonymous principal on the request message. Btw – please don’t annoy me with the “but T.CP is static, and static is bad for testing” chant. T.CP is a getter/setter and, in fact I find it beneficial to be able to set different security contexts in unit tests before calling in some logic. And, in case you have wondered – T.CP is indeed thread static (and the name comes from a time where a logical operation was bound to a thread – which is not true anymore). But all thread creation APIs in .NET actually copy T.CP to the new thread they create. This is the case since .NET 2.0 and is certainly an improvement compared to how Win32 does things. So to sum it up: The host plumbing copies the host client identity to WebAPI (this is not perfect yet, but will surely be improved). or in other words: The current WebAPI bits don’t ship with any authentication plumbing, but solely use whatever authentication (and thus client identity) is set up by the host. WebAPI developers can retrieve the client identity from the HttpRequestMessage. Hopefully my proposed changes around T.CP and the User property on ApiController will be added. In the next post, I will detail how to add WebAPI specific authentication support, e.g. for Basic Authentication and tokens. This includes integrating the notion of claims based identity. After that we will look at the built-in authorization bits and how to improve them as well. Stay tuned.

Read the article

Getting to grips with the stack in nasm

- by MarkPearl

Today I spent a good part of my day getting to grips with the stack and nasm. After looking at my notes on nasm I think this is one area for the course I am doing they could focus more on… So here are some snippets I have put together that have helped me understand a little bit about the stack… Simplest example of the stack You will probably see examples like the following in circulation… these demonstrate the simplest use of the stack… org 0x100 bits 16 jmp main main: push 42h push 43h push 44h mov ah,2h ;set to display characters pop dx ;get the first value int 21h ;and display it pop dx ;get 2nd value int 21h ;and display it pop dx ;get 3rd value int 21h ;and display it int 20h The output from above code would be… DCB Decoupling code using “call” and “ret” This is great, but it oversimplifies what I want to use the stack for… I do not know if this goes against the grain of assembly programmers or not, but I want to write loosely coupled assembly code – and I want to use the stack as a mechanism for passing values into my decoupled code. In nasm we have the call and return instructions, which provides a mechanism for decoupling code, for example the following could be done… org 0x100 bits 16 jmp main ;---------------------------------------- displayChar: mov ah,2h mov dx,41h int 21h ret ;---------------------------------------- main: call displayChar int 20h This would output the following to the console A So, it would seem that call and ret allow us to jump to segments of our code and then return back to the calling position – a form of segmenting the code into what we would called in higher order languages “functions” or “methods”. The only issue is, in higher order languages there is a way to pass parameters into the functions and return results. Because of the primitive nature of the call and ret instructions, this does not seem to be obvious. We could of course use the registers to pass values into the subroutine and set values coming out, but the problem with this is we… Have a limited number of registers Are threading our code with tight coupling (it would be hard to migrate methods outside of their intended use in a particular program to another one) With that in mind, I turn to the stack to provide a loosely coupled way of calling subroutines… First attempt with the Stack Initially I thought this would be simple… we could use code that looks as follows to achieve what I want… org 0x100 bits 16 jmp main ;---------------------------------------- displayChar: mov ah,2h pop dx int 21h ret ;---------------------------------------- main: push 41h call displayChar int 20h However running this application does not give the desired result, I want an ‘A’ to be returned, and I am getting something totally different (you will to). Reading up on the call and ret instructions a discovery is made… they are pushing and popping things onto and off the stack as well… When the call instruction is executed, the current value of IP (the address of the instruction to follow) is pushed onto the stack, when ret is called, the last value on the stack is popped off into the IP register. In effect what the above code is doing is as follows with the stack… push 41h push current value of ip pop current value of ip to dx pop 41h to ip This is not what I want, I need to access the 41h that I pushed onto the stack, but the call value (which is necessary) is putting something in my way. So, what to do? Remember we have other registers we can use as well as a thing called indirect addressing… So, after some reading around, I came up with the following approach using indirect addressing… org 0x100 bits 16 jmp main ;---------------------------------------- displayChar: mov bp,sp mov ah,2h mov dx,[bp+2] int 21h ret ;---------------------------------------- main: push 41h call displayChar int 20h In essence, what I have done here is used a trick with the stack pointer… it goes as follows… Push 41 onto the stack Make the call to the function, which will push the IP register onto the stack and then jump to the displayChar label Move the value in the stack point to the bp register (sp currently points at IP register) Move the at the location of bp minus 2 bytes to dx (this is now the value 41h) display it, execute the ret instruction, which pops the ip value off the stack and goes back to the calling point This approach is still very raw, some further reading around shows that I should be pushing the value of bp onto the stack before replacing it with sp, but it is the starting thread to getting loosely coupled subroutines. Let’s see if you get what the following output would be? org 0x100 bits 16 jmp main ;---------------------------------------- displayChar: mov bp,sp mov ah,2h mov dx,[bp+4] int 21h mov dx,[bp+2] int 21h ret ;---------------------------------------- main: push 41h push 42h call displayChar int 20h The output is… AB Where to from here? If by any luck some assembly programmer comes along and see this code and notices that I have made some fundamental flaw in my logic… I would like to know, so please leave a comment… appreciate any feedback!

Read the article

Making your WCF Web Apis to speak in multiple languages

- by cibrax

One of the key aspects of how the web works today is content negotiation. The idea of content negotiation is based on the fact that a single resource can have multiple representations, so user agents (or clients) and servers can work together to chose one of them. The http specification defines several “Accept” headers that a client can use to negotiate content with a server, and among all those, there is one for restricting the set of natural languages that are preferred as a response to a request, “Accept-Language”. For example, a client can specify “es” in this header for specifying that he prefers to receive the content in spanish or “en” in english. However, there are certain scenarios where the “Accept-Language” header is just not enough, and you might want to have a way to pass the “accepted” language as part of the resource url as an extension. For example, http://localhost/ProductCatalog/Products/1.es” returns all the descriptions for the product with id “1” in spanish. This is useful for scenarios in which you want to embed the link somewhere, such a document, an email or a page. Supporting both scenarios, the header and the url extension, is really simple in the new WCF programming model. You only need to provide a processor implementation for any of them. Let’s say I have a resource implementation as part of a product catalog I want to expose with the WCF web apis. [ServiceContract][Export]public class ProductResource{ IProductRepository repository; [ImportingConstructor] public ProductResource(IProductRepository repository) { this.repository = repository; } [WebGet(UriTemplate = "{id}")] public Product Get(string id, HttpResponseMessage response) { var product = repository.GetById(int.Parse(id)); if (product == null) { response.StatusCode = HttpStatusCode.NotFound; response.Content = new StringContent(Messages.OrderNotFound); } return product; }} The Get method implementation in this resource assumes the desired culture will be attached to the current thread (Thread.CurrentThread.Culture). Another option is to pass the desired culture as an additional argument in the method, so my processor implementation will handle both options. This method is also using an auto-generated class for handling string resources, Messages, which is available in the different cultures that the service implementation supports. For example, Messages.resx contains “OrderNotFound”: “Order Not Found” Messages.es.resx contains “OrderNotFound”: “No se encontro orden” The processor implementation bellow tackles the first scenario, in which the desired language is passed as part of the “Accept-Language” header. public class CultureProcessor : Processor<HttpRequestMessage, CultureInfo>{ string defaultLanguage = null; public CultureProcessor(string defaultLanguage = "en") { this.defaultLanguage = defaultLanguage; this.InArguments[0].Name = HttpPipelineFormatter.ArgumentHttpRequestMessage; this.OutArguments[0].Name = "culture"; } public override ProcessorResult<CultureInfo> OnExecute(HttpRequestMessage request) { CultureInfo culture = null; if (request.Headers.AcceptLanguage.Count > 0) { var language = request.Headers.AcceptLanguage.First().Value; culture = new CultureInfo(language); } else { culture = new CultureInfo(defaultLanguage); } Thread.CurrentThread.CurrentCulture = culture; Messages.Culture = culture; return new ProcessorResult<CultureInfo> { Output = culture }; }} As you can see, the processor initializes a new CultureInfo instance with the value provided in the “Accept-Language” header, and set that instance to the current thread and the auto-generated resource class with all the messages. In addition, the CultureInfo instance is returned as an output argument called “culture”, making possible to receive that argument in any method implementation The following code shows the implementation of the processor for handling languages as url extensions. public class CultureExtensionProcessor : Processor<HttpRequestMessage, Uri>{ public CultureExtensionProcessor() { this.OutArguments[0].Name = HttpPipelineFormatter.ArgumentUri; } public override ProcessorResult<Uri> OnExecute(HttpRequestMessage httpRequestMessage) { var requestUri = httpRequestMessage.RequestUri.OriginalString; var extensionPosition = requestUri.LastIndexOf("."); if (extensionPosition > -1) { var extension = requestUri.Substring(extensionPosition + 1); var query = httpRequestMessage.RequestUri.Query; requestUri = string.Format("{0}?{1}", requestUri.Substring(0, extensionPosition), query); ; var uri = new Uri(requestUri); httpRequestMessage.Headers.AcceptLanguage.Clear(); httpRequestMessage.Headers.AcceptLanguage.Add(new StringWithQualityHeaderValue(extension)); var result = new ProcessorResult<Uri>(); result.Output = uri; return result; } return new ProcessorResult<Uri>(); }} The last step is to inject both processors as part of the service configuration as it is shown bellow, public void RegisterRequestProcessorsForOperation(HttpOperationDescription operation, IList<Processor> processors, MediaTypeProcessorMode mode){ processors.Insert(0, new CultureExtensionProcessor()); processors.Add(new CultureProcessor());} Once you configured the two processors in the pipeline, your service will start speaking different languages :). Note: Url extensions don’t seem to be working in the current bits when you are using Url extensions in a base address. As far as I could see, ASP.NET intercepts the request first and tries to route the request to a registered ASP.NET Http Handler with that extension. For example, “http://localhost/ProductCatalog/products.es” does not work, but “http://localhost/ProductCatalog/products/1.es” does.

Read the article

Tuning Red Gate: #2 of Many

- by Grant Fritchey

In the last installment, I used the SQL Monitor tool to get a snapshot view of the current state of the servers at Red Gate that are giving us trouble. That snapshot suggested some areas where I should focus some time, primarily in which queries were being called most frequently or were running the longest. But, you don't want to just run off & start tuning queries. Remember, the foundation for query tuning is the server itself. So, I want to be sure I'm not looking at some major hardware or configuration issues that I need to address first. Rather than look at the current status of the server, I'm going to look at historical data. Clicking on the Analysis tab of SQL Monitor I get a whole list of counters that I can look at. More importantly, I can look at them over a period of time. Even more importantly, I can compare past periods with current periods to see if we're looking at a progressive issue or not. There are counters here that will give me an indication of load, and there are counters here that will tell me specifics about that load. First, I want to just look at the load to understand where the pain points might be. Trying to drill down before you have detailed information is just bad planning. First thing I'm going to check is the CPU, just to see what's up there. I have two servers I'm interested in, so I'll show you both: Looking at the last 30 days for both servers, well, let's just say that the first server is about what I would expect. It has an average baseline behavior with occasional, regular, peaks. This looks like a system with a fairly steady & predictable load that probably has a nightly batch process that spikes the processor. In short, normal stuff. The points there where the CPU drops radically. that might be worth investigating further because something changed the processing on this system a lot. But the first server. It's all over the place. There's no steady CPU behavior at all. It's spike high for long periods of time. It's up, it's down. I'm really going to have to spend time looking at CPU issues on this server to try to figure out what's up. It might be other processes being shared on the server, it might be something else. Either way, I'm going to have to spend time evaluating this CPU, especially those peeks about a week ago. Looking at the Pages/sec, again, just a measure of load, I see that there are some peaks on the rg-sql02 server, but over all, it looks like a fairly standard load. Plus, the peaks are only up to 550 pages/sec. Remember, this isn't a performance measure, but just a load measurement, but from this, I don't think we're looking at major memory issues, but I may want to correlate these counters with the CPU counters. Again, the other server looks like there's stuff going on. The load is not at all consistent. In fact there was a point earlier in the year that looks pretty severe. Plus the spikes here are twice the size of the other system. We've got a lot more load going on here and I will probably need to drill down on memory usage on this server. Taking a look at the disk transfers/sec the load on both systems seems to roughly correspond to the other load indicators. Notice that drop right in the middle of the graph for rg-sql02. I wonder if the office was closed over that period or a system was down for maintenance. If I saw spikes in memory or disk that corresponded to the drip in CPU, you can assume something was using those other resources and causing a drop, but when everything goes down, it just means that the system isn't gettting used. The disk on the rg-sql01 system isn't spiking exactly the same way as the memory & cpu, so there's a good chance (chance mind you) that any performance issues might not be disk related. However, notice that huge jump at the beginning of the month. Several disks were used more than they were for the rest of the month. That's the load on the server. What about the load on SQL Server itself? Next time.

Read the article

OpenSSL Versions in Solaris

- by darrenm

Those of you have have installed Solaris 11 or have read some of the blogs by my colleagues will have noticed Solaris 11 includes OpenSSL 1.0.0, this is a different version to what we have in Solaris 10. I hope the following explains why that is and how it fits with the expectations on binary compatibility between Solaris releases. Solaris 10 was the first release where we included OpenSSL libraries and headers (part of it was actually statically linked into the SSH client/server in Solaris 9). At time we were building and releasing Solaris 10 the current train of OpenSSL was 0.9.7. The OpenSSL libraries at that time were known to not always be completely API and ABI (binary) compatible between releases (some times even in the lettered patch releases) though mostly if you stuck with the documented high level APIs you would be fine. For this reason OpenSSL was classified as a 'Volatile' interface and in Solaris 10 Volatile interfaces were not part of the default library search path which is why the OpenSSL libraries live in /usr/sfw/lib on Solaris 10. Okay, but what does Volatile mean ? Quoting from the attributes(5) man page description of Volatile (which was called External in older taxonomy): Volatile interfaces can change at any time and for any reason. The Volatile interface stability level allows Sun pro- ducts to quickly track a fluid, rapidly evolving specif- ication. In many cases, this is preferred to providing additional stability to the interface, as it may better meet the expectations of the consumer. The most common application of this taxonomy level is to interfaces that are controlled by a body other than Sun, but unlike specifications controlled by standards bodies or Free or Open Source Software (FOSS) communities which value interface compatibility, it can not be asserted that an incompatible change to the interface specifica- tion would be exceedingly rare. It may also be applied to FOSS controlled software where it is deemed more important to track the community with minimal latency than to provide stability to our customers. It also common to apply the Volatile classification level to interfaces in the process of being defined by trusted or widely accepted organization. These are generically referred to as draft standards. An "IETF Internet draft" is a well understood example of a specification under development. Volatile can also be applied to experimental interfaces. No assertion is made regarding either source or binary compatibility of Volatile interfaces between any two releases, including patches. Applications containing these interfaces might fail to function properly in any future release. Note that last paragraph! OpenSSL is only one example of the many interfaces in Solaris that are classified as Volatile. At the other end of the scale we have Committed (Stable in Solaris 10 terminology) interfaces, these include things like the POSIX APIs or Solaris specific APIs that we have no intention of changing in an incompatible way. There are also Private interfaces and things we declare as Not-an-Interface (eg command output not intended for scripting against only to be read by humans). Even if we had declared OpenSSL as a Committed/Stable interface in Solaris 10 there are allowed exceptions, again quoting from attributes(5): 4. An interface specification which isn't controlled by Sun has been changed incompatibly and the vast majority of interface consumers expect the newer interface. 5. Not making the incompatible change would be incomprehensible to our customers. In our opinion and that of our large and small customers keeping up with the OpenSSL community is important, and certainly both of the above cases apply. Our policy for dealing with OpenSSL on Solaris 10 was to stay at 0.9.7 and add fixes for security vulnerabilities (the version string includes the CVE numbers of fixed vulnerabilities relevant to that release train). The last release of OpenSSL 0.9.7 delivered by the upstream community was more than 4 years ago in Feb 2007. Now lets roll forward to just before the release of Solaris 11 Express in 2010. By that point in time the current OpenSSL release was 0.9.8 with the 1.0.0 release known to be coming soon. Two significant changes to OpenSSL were made between Solaris 10 and Solaris 11 Express. First in Solaris 11 Express (and Solaris 11) we removed the requirement that Volatile libraries be placed in /usr/sfw/lib, that means OpenSSL is now in /usr/lib, secondly we upgraded it to the then current version stream of OpenSSL (0.9.8) as was expected by our customers. In between Solaris 11 Express in 2010 and the release of Solaris 11 in 2011 the OpenSSL community released version 1.0.0. This was a huge milestone for a long standing and highly respected open source project. It would have been highly negligent of Solaris not to include OpenSSL 1.0.0e in the Solaris 11 release. It is the latest best supported and best performing version. In fact Solaris 11 isn't 'just' OpenSSL 1.0.0 but we have added our SPARC T4 engine and the AES-NI engine to support the on chip crypto acceleration. This gives us 4.3x better AES performance than OpenSSL 0.9.8 running on AIX on an IBM POWER7. We are now working with the OpenSSL community to determine how best to integrate the SPARC T4 changes into the mainline OpenSSL. The OpenSSL 'pkcs11' engine we delivered in Solaris 10 to support the CA-6000 card and the SPARC T1/T2/T3 hardware is still included in Solaris 11. When OpenSSL 1.0.1 and 1.1.0 come out we will asses what is best for Solaris customers. It might be upgrade or it might be parallel delivery of more than one version stream. At this time Solaris 11 still classifies OpenSSL as a Volatile interface, it is our hope that we will be able at some point in a future release to give it a higher interface stability level. Happy crypting! and thank-you OpenSSL community for all the work you have done that helps Solaris.

Read the article

Blank screen after installing nvidia restricted driver

- by LaMinifalda

I have a new machine with a MSI N560GTX Ti Twin Frozr II/OC graphic card and MSI PH67A-C43 (B3) main board. If i install the current nvidia restricted driver and reboot the machine on Natty (64-bit), then i only get a black screen after reboot and my system does not respond. I can´t see the login screen. On nvidia web page i saw that the current driver is 270.41.06. Is that driver used as current driver? Btw, i am an ubuntu/linux beginner and therefore not very familiar with ubuntu. What can i do to solve the black screen problem? EDIT: Setting the nomodeset parameter does not solve the problem. After ubuntu start, first i see the ubuntu logo, then strange pixels and at the end the black screen. HELP! EDIT2: Thank you, but setting the "video=vesa:off gfxpayload=text" parameters do no solve the problem too. Same result as in last edit. HELP. I would like to see Unity. This is my grub: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="video=vesa:off gfxpayload=text nomodeset quiet splash" GRUB_CMDLINE_LINUX=" vga=794" EDIT3: I dont know if it is important. If this edit is unnecessary and helpless I will delete it. There are some log files (Xorg.0.log - Xorg.4.log). I dont know how these log files relate to each other. Please, check the errors listed below. In Xorg.1.log I see the following error: [ 20.603] (EE) Failed to initialize GLX extension (ComIatible NVIDIA X driver not found) In Xorg.2.log I see the following error: [ 25.971] (II) Loading /usr/lib/xorg/modules/libfb.so [ 25.971] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 25.971] (==) NVIDIA(0): RGB weight 888 [ 25.971] (==) NVIDIA(0): Default visual is TrueColor [ 25.971] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 26.077] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [ 26.078] (EE) NVIDIA(0): check your system's kernel log for additional error [ 26.078] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the [ 26.078] (EE) NVIDIA(0): README for additional information. [ 26.078] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device! [ 26.078] (II) UnloadModule: "nvidia" [ 26.078] (II) Unloading nvidia [ 26.078] (II) UnloadModule: "wfb" [ 26.078] (II) Unloading wfb [ 26.078] (II) UnloadModule: "fb" [ 26.078] (II) Unloading fb [ 26.078] (EE) Screen(s) found, but none have a usable configuration. [ 26.078] Fatal server error: [ 26.078] no screens found [ 26.078] Please consult the The X.Org Found [...] In Xorg.4.log I see the following errors: [ 15.437] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 15.437] (==) NVIDIA(0): RGB weight 888 [ 15.437] (==) NVIDIA(0): Default visual is TrueColor [ 15.437] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 15.703] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0) [ 15.703] (--) NVIDIA(0): Memory: 1048576 kBytes [ 15.703] (--) NVIDIA(0): VideoBIOS: 70.24.11.00.00 [ 15.703] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 15.703] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 15.703] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 560 Ti at [ 15.703] (--) NVIDIA(0): PCI:1:0:0 [ 15.703] (--) NVIDIA(0): none [ 15.706] (EE) NVIDIA(0): No display devices found for this X screen. [ 15.943] (II) UnloadModule: "nvidia" [ 15.943] (II) Unloading nvidia [ 15.943] (II) UnloadModule: "wfb" [ 15.943] (II) Unloading wfb [ 15.943] (II) UnloadModule: "fb" [ 15.943] (II) Unloading fb [ 15.943] (EE) Screen(s) found, but none have a usable configuration. [ 15.943] Fatal server error: [ 15.943] no screens found EDIT4 There was a file /etc/X11/xorg.conf. As fossfreedom suggested I executed sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup However, there is still the black screen after reboot. EDIT5 Neutro's advice (reinstalling the headers) did not solve the problem, too. :-( Any further help is appreciated! EDIT6 I just installed driver 173.xxx. After reboot the system shows me only "Checking battery state". Just for information. I will google the problem, but help is also appreciated! ;-) EDIT7 When using the free driver (Ubuntu says that the free driver is in use and activated), Xorg.0.log shows the following errors: [ 9.267] (II) LoadModule: "nouveau" [ 9.267] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 9.267] (II) Module nouveau: vendor="X.Org Foundation" [ 9.267] compiled for 1.10.0, module version = 0.0.16 [ 9.267] Module class: X.Org Video Driver [ 9.267] ABI class: X.Org Video Driver, version 10.0 [ 9.267] (II) LoadModule: "nv" [ 9.267] (WW) Warning, couldn't open module nv [ 9.267] (II) UnloadModule: "nv" [ 9.267] (II) Unloading nv [ 9.267] (EE) Failed to load module "nv" (module does not exist, 0) [ 9.267] (II) LoadModule: "vesa" [...] [ 9.399] drmOpenDevice: node name is /dev/dri/card14 [ 9.402] drmOpenDevice: node name is /dev/dri/card15 [ 9.406] (EE) [drm] failed to open device [ 9.406] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 9.406] (WW) Falling back to old probe method for fbdev [ 9.406] (II) Loading sub module "fbdevhw" [ 9.406] (II) LoadModule: "fbdevhw" EDIT8 In the meanwhile i tried to install WIN7 64 bit on my machine. As a result i got a BSOD after installing the nvidia driver. :-) For this reason i sent my new machine back to the hardware reseller. I will inform you as soon as i have a new system. Thank you all for the great help and support. EDIT9 In the meanwhile I have a complete new system with "only" a MSI N460GTX Hawk, but more RAM. The system works perfect. :-) The original N560GTX had a hardware defect. Is is possible to close this question? THX!

Read the article

Drawing on a webpage – HTML5 - IE9

- by nmarun

So I upgraded to IE9 and continued exploring HTML5. Now there’s this ‘thing’ called Canvas in HTML5 with which you can do some cool stuff. Alright what IS this Canvas thing anyways? The Web Hypertext Application Technology Working Group says this: “The canvas element provides scripts with a resolution-dependent bitmap canvas, which can be used for rendering graphs, game graphics, or other visual images on the fly.” The Canvas element has two only attributes – width and height and when not specified they take up the default values of 300 and 150 respectively. Below is what my HTML file looks like: 1: <!DOCTYPE html> 2: <html lang="en-US"> 3: <head> 4: <script type="text/javascript" src="CustomScript.js"></script> 5: <script src="jquery-1.4.4.js" type="text/javascript"></script 6: 7: <title>Draw on a webpage</title> 8: </head> 9: <body> 10: <canvas id="canvas" width="500" height="500"></canvas> 11: <br /> 12: <input type="submit" id="submit" value="Clear" /> 13: <h4 id="currentPosition"> 14: 0, 0 15: </h4> 16: <div id="mousedownCoords"></div> 17: </body> 18: </html> In case you’re wondering, this is not a MVC or any kind of web application. This is plain ol’ HTML even though I’m writing all this in VS 2010. You see this is a very simple, ‘gimmicks-free’ html page. I have declared a Canvas element on line 10 and a button on line 11 to clear the drawing board. I’m using jQuery / JavaScript show the current position of the mouse on the screen. This will get updated in the ‘currentPosition’ <h4> tag and I’m using the ‘mousedownCoords’ to write all the places where the mouse was clicked. This is what my page renders as: The rectangle with a background is our canvas. The coloring is due to some javascript (which we’ll see in a moment). Now let’s get to our CustomScript.js file. 1: jQuery(document).ready(function () { 2: var isFirstClick = true; 3: var canvas = document.getElementById("canvas"); 4: // getContext: Returns an object that exposes an API for drawing on the canvas 5: var canvasContext = canvas.getContext("2d"); 6: fillBackground(); 7: 8: $("#submit").click(function () { 9: clearCanvas(); 10: fillBackground(); 11: }); 12: 13: $(document).mousemove(function (e) { 14: $('#currentPosition').html(e.pageX + ', ' + e.pageY); 15: }); 16: $(document).mouseup(function (e) { 17: // on the first click 18: // set the moveTo 19: if (isFirstClick == true) { 20: canvasContext.beginPath(); 21: canvasContext.moveTo(e.pageX - 7, e.pageY - 7); 22: isFirstClick = false; 23: } 24: else { 25: // on subsequent clicks, draw a line 26: canvasContext.lineTo(e.pageX - 7, e.pageY - 7); 27: canvasContext.stroke(); 28: } 29: 30: $('#mousedownCoords').text($('#mousedownCoords').text() + '(' + e.pageX + ',' + e.pageY + ')'); 31: }); 32: 33: function fillBackground() { 34: canvasContext.fillStyle = '#a1b1c3'; 35: canvasContext.fillRect(0, 0, 500, 500); 36: canvasContext.fill(); 37: } 38: 39: function clearCanvas() { 40: // wipe-out the canvas 41: canvas.width = canvas.width; 42: // set the isFirstClick to true 43: // so the next shape can begin 44: isFirstClick = true; 45: // clear the text 46: $('#mousedownCoords').text(''); 47: } 48: }) The script only looks long and complicated, but is not. I’ll go over the main steps. Get a ‘hold’ of your canvas object and retrieve the ‘2d’ context out of it. On mousemove event, write the current x and y coordinates to the ‘currentPosition’ element. On mouseup event, check if this is the first time the user has clicked on the canvas. The coloring of the canvas is done in the fillBackground() function. We first need to start a new path. This is done by calling the beginPath() function on our context. The moveTo() function sets the starting point of our path. The lineTo() function sets the end point of the line to be drawn. The stroke() function is the one that actually draws the line on our canvas. So if you want to play with the demo, here’s how you do it. First click on the canvas (nothing visible happens on the canvas). The second click draws a line from the first click to the current coordinates and so on and so forth. Click on the ‘Clear’ button, to reset the canvas and to give your creativity a clean slate. Here’s a sample output: Happy drawing! Verdict: HTML5 and IE9 – I think we’re on to something big and great here!

Read the article

Upgrading Agent Controllers in Oracle Enterprise Manager Ops Center 12c

- by S Stelting

Oracle Enterprise Manager Ops Center 12c recently released an upgrade for Solaris Agent Controllers. In this week's blog post, we'll show you how to upgrade agent controllers. Detailed instructions about upgrading Agent Controllers are available in the product documentation here. This blog post uses an Enterprise Controller which is configured for connected mode operation. If you'd like to apply the agent update in a disconnected installation, additional instructions are available here. Step 1: Download Agent Controller Updates With a connected mode Ops Center installation, you can check for product updates at any time by selecting the Enterprise Controller from the left-hand Administration navigation tab. Select the right-hand Action link “Ops Center Downloads” to open a pop-up dialog displaying any new product updates. In this example, the Enterprise Controller has already been upgraded to the latest version (Update 1, also shown as build version 2076) so only the Agent Controller updates will appear. There are three updates available: one for Solaris 10 X86, one for Solaris 8-10 SPARC, and one for all versions of Solaris 11. Note that the last update in the screen shot is the Solaris 11 update; for details on any of the downloads, place your mouse over the information icon under the details column for a pop-up text region. Select the software to download and click the Next button to display the Ops Center license agreement. Review and click the check box to accept the license agreement, then click the Next button to begin downloading the software. The status screen shows the current download status. If desired, you can perform the downloads as a background job. Simply click the check box, then click the next button to proceed to the summary screen. The summary screen shows the updates to be downloaded as well as the current status. Clicking the Finish button will close the dialog and return to the Browser UI. The download job will continue to run in Ops Center and progress can still be viewed from the jobs menu at the bottom of the browser window. Step 2: Check the Version of Existing Agent Controllers After the download job completes, you can check the availability of agent updates as well as the current versions of your Agent Controllers from the left-hand Assets navigation tab. Select “Operating Systems” from the pull-down tab lets to display only OS assets. Next, select “Solaris” in the left-hand tab to display the Solaris assets. Finally, select the Summary tab in the center display panel to show which versions of agent controllers are installed in your data center. Notice that a few of the OS assets are not displayed in the Agent Controllers tab. Ops Center will not display OS instances which do not have an Agent Controller installation. This includes Enterprise Controllers and Proxy Controllers (unless the agent has been activated on the OS instance) and and OS instances using agentless management. For Agent Controllers which support an update, the version of agent software (in this example, 2083) appears to the right of the currently installed version. Step 3: Upgrade Your Agent Controllers If desired, you can upgrade agent controllers from the previous screen by selecting the desired systems and clicking the upgrade button. Alternatively, you can click the link “Upgrade All Agent Controllers” in the right-hand Actions menu: In either case, a pop-up dialog lets you start the upgrade process. The first screen in the dialog lets you choose the upgrade method: Ops Center provides three ways to upgrade agent controllers: Automatic Upgrade: If Agent Controllers are running on all assets, Ops Center can automatically upgrade the software to the latest version without requiring any login credentials to the system SSH using a single set of credentials: If all assets use the same login credentials, you can apply a single set to all assets for the upgrade process. The log-in credentials are the same ones used for asset discovery and management, which are stored in the Plan Management navigation tab under Credentials. SSH using individual credentials: If assets use different login credentials, you can select a different set for each asset. After selecting the upgrade method, click the Next button to proceed to the summary screen. Click the Finish button to close the pop-up dialog and start the upgrade job for the agent controllers. The upgrade job runs a series of tasks in parallel, and will upgrade all agents which have been selected. Once the job completes, the OS instances in your data center will be upgraded and running the latest version of Agent Controller software.

Read the article

Extended FindWindow

- by João Angelo

The Win32 API provides the FindWindow function that supports finding top-level windows by their class name and/or title. However, the title search does not work if you are trying to match partial text at the middle or the end of the full window title. You can however implement support for these extended search features by using another set of Win32 API like EnumWindows and GetWindowText. A possible implementation follows: using System; using System.Collections.Generic; using System.Linq; using System.Runtime.InteropServices; using System.Text; public class WindowInfo { private IntPtr handle; private string className; internal WindowInfo(IntPtr handle, string title) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); this.Handle = handle; this.Title = title ?? string.Empty; } public string Title { get; private set; } public string ClassName { get { if (className == null) { className = GetWindowClassNameByHandle(this.Handle); } return className; } } public IntPtr Handle { get { if (!NativeMethods.IsWindow(this.handle)) throw new InvalidOperationException("The handle is no longer valid."); return this.handle; } private set { this.handle = value; } } public static WindowInfo[] EnumerateWindows() { var windows = new List<WindowInfo>(); NativeMethods.EnumWindowsProcessor processor = (hwnd, lParam) => { windows.Add(new WindowInfo(hwnd, GetWindowTextByHandle(hwnd))); return true; }; bool succeeded = NativeMethods.EnumWindows(processor, IntPtr.Zero); if (!succeeded) return new WindowInfo[] { }; return windows.ToArray(); } public static WindowInfo FindWindow(Predicate<WindowInfo> predicate) { WindowInfo target = null; NativeMethods.EnumWindowsProcessor processor = (hwnd, lParam) => { var current = new WindowInfo(hwnd, GetWindowTextByHandle(hwnd)); if (predicate(current)) { target = current; return false; } return true; }; NativeMethods.EnumWindows(processor, IntPtr.Zero); return target; } private static string GetWindowTextByHandle(IntPtr handle) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); int length = NativeMethods.GetWindowTextLength(handle); if (length == 0) return string.Empty; var buffer = new StringBuilder(length + 1); NativeMethods.GetWindowText(handle, buffer, buffer.Capacity); return buffer.ToString(); } private static string GetWindowClassNameByHandle(IntPtr handle) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); const int WindowClassNameMaxLength = 256; var buffer = new StringBuilder(WindowClassNameMaxLength); NativeMethods.GetClassName(handle, buffer, buffer.Capacity); return buffer.ToString(); } } internal class NativeMethods { public delegate bool EnumWindowsProcessor(IntPtr hwnd, IntPtr lParam); [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool EnumWindows( EnumWindowsProcessor lpEnumFunc, IntPtr lParam); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetWindowText( IntPtr hWnd, StringBuilder lpString, int nMaxCount); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetWindowTextLength(IntPtr hWnd); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetClassName( IntPtr hWnd, StringBuilder lpClassName, int nMaxCount); [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool IsWindow(IntPtr hWnd); } The access to the windows handle is preceded by a sanity check to assert if it’s still valid, but if you are dealing with windows out of your control then the window can be destroyed right after the check so it’s not guaranteed that you’ll get a valid handle. Finally, to wrap this up a usage, example: static void Main(string[] args) { var w = WindowInfo.FindWindow(wi => wi.Title.Contains("Test.docx")); if (w != null) { Console.Write(w.Title); } }

Read the article

OpenGL (glx) not working with ubuntu 12.10

- by user26766

It all started when I installed nvidia's own (download from website) driver. Uninstalling it and reverting back to nvidia-current didn't solve the problem, so I have been playing with this for a while. It seems glx support is missing, and my intel graphics is not responding. gnome loads only in fallback mode. Here are some outputs: glxinfo name of display: :0.0 Error: couldn't find RGB GLX visual or fbconfig glxgears Error: couldn't get an RGB, Double-buffered visual optirun glxgears works fine lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) Here's the content of log file when just after running glxinfo: less /var/log/Xorg.0.log | grep gl [ 112.156] (II) LoadModule: "glx" [ 112.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 112.157] (II) Module glx: vendor="X.Org Foundation" [ 112.157] (II) UnloadModule: "glx" [ 112.157] (II) Unloading glx [ 112.157] (EE) Failed to load module "glx" (module requirement mismatch, 0) Some more info... lsmod Module Size Used by bbswitch 13612 0 pci_stub 12623 1 vboxpci 23195 0 vboxnetadp 25671 0 vboxnetflt 23480 0 vboxdrv 320372 3 vboxpci,vboxnetadp,vboxnetflt parport_pc 32689 0 ppdev 17074 0 bnep 18141 2 rfcomm 46620 12 binfmt_misc 17501 1 snd_hda_codec_hdmi 32049 1 snd_hda_codec_realtek 78147 1 joydev 17458 0 uvcvideo 76750 0 videobuf2_core 32852 1 uvcvideo videodev 120310 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12861 1 uvcvideo videobuf2_memops 13405 1 videobuf2_vmalloc snd_hda_intel 33492 3 coretemp 13401 0 kvm_intel 132760 0 arc4 12530 2 snd_hda_codec 134213 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel kvm 414111 1 kvm_intel iwlwifi 386837 0 i915 520799 2 snd_hwdep 17699 1 snd_hda_codec snd_pcm 96668 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 100389 0 drm_kms_helper 49113 1 i915 ghash_clmulni_intel 13221 0 snd_seq_midi 13325 0 snd_rawmidi 30513 1 snd_seq_midi btusb 22475 0 drm 288436 3 i915,drm_kms_helper serio_raw 13216 0 snd_seq_midi_event 14900 1 snd_seq_midi snd_seq 61555 2 snd_seq_midi,snd_seq_midi_event mac80211 535936 1 iwlwifi bluetooth 209249 22 bnep,rfcomm,btusb snd_timer 29426 2 snd_pcm,snd_seq snd_seq_device 14498 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78921 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 206797 2 iwlwifi,mac80211 aesni_intel 51038 1 cryptd 20404 2 ghash_clmulni_intel,aesni_intel aes_x86_64 17256 1 aesni_intel dell_wmi 12682 0 sparse_keymap 13891 1 dell_wmi dcdbas 14439 0 i2c_algo_bit 13414 1 i915 microcode 22804 0 lpc_ich 17062 0 soundcore 15048 1 snd snd_page_alloc 18485 2 snd_hda_intel,snd_pcm video 19391 1 i915 mac_hid 13206 0 wmi 19071 1 dell_wmi mei 40691 0 lp 17760 0 parport 46346 3 parport_pc,ppdev,lp ahci 25721 3 libahci 31192 1 ahci atl1c 41102 0 how can I fix this? any ideas? Here is another thing I've tried: sudo apt-get purge nvidia* sudo reboot sudo apt-get install bumblebee bumblebee-nvidia didn't make any difference. The most relevant post I found on the web was this: http://ubuntuforums.org/archive/index.php/t-1722306.html Here it's explained that the problem is with the priority of shared libraries that are loaded for glxinfo. Here's what I get when I look up the libraries: linux-vdso.so.1 => (0x00007fff6bf8b000) libGL.so.1 => /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1 (0x00007f22d6ccd000) libX11.so.6 => /usr/lib/x86_64-linux-gnu/libX11.so.6 (0x00007f22d6993000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f22d65d3000) libglapi.so.0 => /usr/lib/x86_64-linux-gnu/libglapi.so.0 (0x00007f22d63ad000) libXext.so.6 => /usr/lib/x86_64-linux-gnu/libXext.so.6 (0x00007f22d619b000) libXdamage.so.1 => /usr/lib/x86_64-linux-gnu/libXdamage.so.1 (0x00007f22d5f97000) libXfixes.so.3 => /usr/lib/x86_64-linux-gnu/libXfixes.so.3 (0x00007f22d5d91000) libX11-xcb.so.1 => /usr/lib/x86_64-linux-gnu/libX11-xcb.so.1 (0x00007f22d5b8f000) libxcb-glx.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-glx.so.0 (0x00007f22d5977000) libxcb.so.1 => /usr/lib/x86_64-linux-gnu/libxcb.so.1 (0x00007f22d5759000) libXxf86vm.so.1 => /usr/lib/x86_64-linux-gnu/libXxf86vm.so.1 (0x00007f22d5553000) libdrm.so.2 => /usr/lib/x86_64-linux-gnu/libdrm.so.2 (0x00007f22d5346000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f22d5129000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f22d4f25000) /lib64/ld-linux-x86-64.so.2 (0x00007f22d6f54000) libXau.so.6 => /usr/lib/x86_64-linux-gnu/libXau.so.6 (0x00007f22d4d20000) libXdmcp.so.6 => /usr/lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007f22d4b1a000) librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f22d4911000) It seems "mesa" instead of nvidia-current is being used. However I didn't find any obvious link to /lib/nvidia-current in /etc/ld.so.conf (where the directories containing the shared libraries are listed). I don't know if there's anything missing or if this is normal. thanks, UPDATE: The problem was solved by updating to Ubuntu 13.04. It seems bumblebee was to blame, but I'm not sure what was going wrong...

Read the article

Project of Projects with team Foundation Server 2010

- by Martin Hinshelwood

It is pretty much accepted that you should use Areas instead of having many small Team Projects when you are using Team Foundation Server 2010. I have implemented this scenario many times and this is the current iteration of layout and considerations. If like me you work with many customers you will find that you get into a grove for how to set these things up to make them as easily understandable for everyone, while giving the best functionality. The trick is in making it as intuitive as possible for both you and the developers that need to work with it. There are five main places where you need to have the Product or Project name in prominence of any other value. Area Iteration Source Code Work Item Queries Build Once you decide how you are doing this in each of these places you need to keep to it religiously. Evan if you have one source code file to keep, make sure it is in the right place. This makes your developers and others working with the format familiar with where everything should go, as well as building up mussel memory. This prevents the neat system degenerating into a nasty mess. Areas Areas are traditionally used to separate out parts of your product / project so that you can see how much effort has gone into each. Figure: The top level areas are for reporting and work item separation There are massive advantages of using this method. You can: move work from one project to another rename a project / product It is far more likely that a project or product gets renamed than a department. Tip: If you have many projects, over 100, you should consider categorising them here, but make sure that the actual project name always sits at the same level so you know which is which. Figure: Always keep things that are the same at the same level Note: You may use these categories only at the Area/Iteration level to make it easier to select on drop down lists. You may not want to use them everywhere. On the other hand, for consistency it would be better to. Iterations Iterations are usually used to some sort of time based consideration. Here I am splitting into Iterations with periodic releases. Figure: Each product needs to be able to have its own cadence The ability to have each project run at its own pace and to enable them to have their own release schedule is often of paramount importance and you don’t want to fix your 100+ projects to all be released on the same date. Source Code Having a good structure for your source even if you are not branching or having multiple products under the same structure is always a good idea. Figure: Separate out your products source You need to think about both your branches as well as the structure of your source. All your code should be under “Source” and everything you need to build your solution including Build Scripts and 3rd party tools should be under your “Main” (branch) folder. This should them be branched by “Quality”, “Release” or both to get the most out of your branching structure. The important thing is to make sure you branch (or be able to branch) everything you need to build, test and deploy your application to an environment. That environment may be development, test or even production, but I can’t stress the importance of having everything your need. Note: You usually will not be able to install custom software on your build server. Store any *.dll’s or *.exe’s that you need under the “Tools\Tool1” folder. Note: Consult the Branching Guidance for Team Foundation Server 2010 for more on branching Figure: Adding category may be a necessary evil Even if you have to have a couple of categories called “Default”, it is better than not knowing the difference between a folder, Product and Branch. Work Item Queries Queries are used to load lists of Work Items out of TFS so you can see what work you have. This means that you want to also separate queries out by Product / project to make it easier to Figure: Again you have the same first level structure Having Folders also in Work Item Tracking we do the same thing. We put all the queries under a folder named for the Product / Project and change each query to have “AreaPath=[TeamProject]\[ProductX]” in the query instead of the standard “Project=@Project”. Tip: Don’t have a folder with new queries for each iteration. Instead have a single “Current” folder that has queries that point to the current iteration. Just change the queries as you move from one iteration to another. Tip: You can ctrl+drag the “Product1” folder to create your “Product2” folder. Builds You may have many builds both for individual products but also for different quality's. This can be further complicated by having some builds that action “Gated Check-In” and others that are specifically for “Release”, “Test” or another purpose. Figure: There are no folders, yet, for the builds so you need a good naming convention Its a pity that there are no folders under builds, some way to categorise would be nice. In lue of that at the moment you can use a functional naming convention that at least allows you to find what you want. Conclusion It is really easy to both achieve and to stick to this format if you take the time to do it. Unless you have 1000+ builds or 100+ Products you are unlikely run into any issues. Even then there are things you can do to mitigate the issues and I have describes some of them above. Let me know if you can think of any other things to make this easier.

Read the article

How-to populate different select list content per table row

- by frank.nimphius

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A frequent requirement posted on the OTN forum is to render cells of a table column using instances of af:selectOneChoices with each af:selectOneChoice instance showing different list values. To implement this use case, the select list of the table column is populated dynamically from a managed bean for each row. The table's current rendered row object is accessible in the managed bean using the #{row} expression, where "row" is the value added to the table's var property. <af:table var="row"> ... <af:column ...> <af:selectOneChoice ...> <f:selectItems value="#{browseBean.items}"/> </af:selectOneChoice> </af:column </af:table> The browseBean managed bean referenced in the code snippet above has a setItems and getItems method defined that is accessible from EL using the #{browseBean.items} expression. When the table renders, then the var property variable - the #{row} reference - is filled with the data object displayed in the current rendered table row. The managed bean getItems method returns a List<SelectItem>, which is the model format expected by the f:selectItems tag to populate the af:selectOneChoice list. public void setItems(ArrayList<SelectItem> items) {} //this method is executed for each table row public ArrayList<SelectItem> getItems() { FacesContext fctx = FacesContext.getCurrentInstance(); ELContext elctx = fctx.getELContext(); ExpressionFactory efactory = fctx.getApplication().getExpressionFactory(); ValueExpression ve = efactory.createValueExpression(elctx, "#{row}", Object.class); Row rw = (Row) ve.getValue(elctx); //use one of the row attributes to determine which list to query and //show in the current af:selectOneChoice list // ... ArrayList<SelectItem> alsi = new ArrayList<SelectItem>(); for( ... ){ SelectItem item = new SelectItem(); item.setLabel(...); item.setValue(...); alsi.add(item); } return alsi;} For better performance, the ADF Faces table stamps it data rows. Stamping means that the cell renderer component - af:selectOneChoice in this example - is instantiated once for the column and then repeatedly used to display the cell data for individual table rows. This however means that you cannot refresh a single select one choice component in a table to change its list values. Instead the whole table needs to be refreshed, rerunning the managed bean list query. Be aware that having individual list values per table row is an expensive operation that should be used only on small tables for Business Services with low latency data fetching (e.g. ADF Business Components and EJB) and with server side caching strategies for the queried data (e.g. storing queried list data in a managed bean in session scope).

Read the article

NetBeans, JSF, and MySQL Primary Keys using AUTO_INCREMENT

- by MarkH

I recently had the opportunity to spin up a small web application using JSF and MySQL. Having developed JSF apps with Oracle Database back-ends before and possessing some small familiarity with MySQL (sans JSF), I thought this would be a cakewalk. Things did go pretty smoothly...but there was one little "gotcha" that took more time than the few seconds it really warranted. The Problem Every DBMS has its own way of automatically generating primary keys, and each has its pros and cons. For the Oracle Database, you use a sequence and point your Java classes to it using annotations that look something like this: @GeneratedValue(strategy=GenerationType.SEQUENCE, generator="POC_ID_SEQ") @SequenceGenerator(name="POC_ID_SEQ", sequenceName="POC_ID_SEQ", allocationSize=1) Between creating the actual sequence in the database and making sure you have your annotations right (watch those typos!), it seems a bit cumbersome. But it typically "just works", without fuss. Enter MySQL. Designating an integer-based field as PRIMARY KEY and using the keyword AUTO_INCREMENT makes the same task seem much simpler. And it is, mostly. But while NetBeans cranks out a superb "first cut" for a basic JSF CRUD app, there are a couple of small things you'll need to bring to the mix in order to be able to actually (C)reate records. The (RUD) performs fine out of the gate. The Solution Omitting all design considerations and activity (!), here is the basic sequence of events I followed to create, then resolve, the JSF/MySQL "Primary Key Perfect Storm": Fire up NetBeans. Create JSF project. Create Entity Classes from Database. Create JSF Pages from Entity Classes. Test run. Try to create record and hit error. It's a simple fix, but one that was fun to find in its completeness. :-) Even though you've told it what to do for a primary key, a MySQL table requires a gentle nudge to actually generate that new key value. Two things are needed to make the magic happen. First, you need to ensure the following annotation is in place in your Java entity classes: @GeneratedValue(strategy = GenerationType.IDENTITY) All well and good, but the real key is this: in your controller class(es), you'll have a create() function that looks something like this, minus the comment line and the setId() call in bold red type: public String create() { try { // Assign 0 to ID for MySQL to properly auto_increment the primary key. current.setId(0); getFacade().create(current); JsfUtil.addSuccessMessage(ResourceBundle.getBundle("/Bundle").getString("CategoryCreated")); return prepareCreate(); } catch (Exception e) { JsfUtil.addErrorMessage(e, ResourceBundle.getBundle("/Bundle").getString("PersistenceErrorOccured")); return null; } } Setting the current object's primary key attribute to zero (0) prior to saving it tells MySQL to get the next available value and assign it to that record's key field. Short and simple…but not inherently obvious if you've never used that particular combination of NetBeans/JSF/MySQL before. Hope this helps! All the best, Mark

Read the article

Data Source Security Part 5

- by Steve Felts

If you read through the first four parts of this series on data source security, you should be an expert on this focus area. There is one more small topic to cover related to WebLogic Resource permissions. After that comes the test, I mean example, to see with a real set of configuration parameters what the results are with some concrete values. WebLogic Resource Permissions All of the discussion so far has been about database credentials that are (eventually) used on the database side. WLS has resource credentials to control what WLS users are allowed to access JDBC resources. These can be defined on the Policies tab on the Security tab associated with the data source. There are four permissions: “reserve” (get a new connection), “admin”, “shrink”, and reset (plus the all-inclusive “ALL”); we will focus on “reserve” here because we are talking about getting connections. By default, JDBC resource permissions are completely open – anyone can do anything. As soon as you add one policy for a permission, then all other users are restricted. For example, if I add a policy so that “weblogic” can reserve a connection, then all other users will fail to reserve connections unless they are also explicitly added. The validation is done for WLS user credentials only, not database user credentials. Configuration of resources in general is described at “Create policies for resource instances” http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/security/CreatePoliciesForResourceInstances.html. This feature can be very useful to restrict what code and users can get to your database. There are the three use cases: API Use database credentials User for permission checking getConnection() True or false Current WLS user getConnection(user,password) False User/password from API getConnection(user,password) True Current WLS user If a simple getConnection() is used or database credentials are enabled, the current user that is authenticated to the WLS system is checked. If database credentials are not enabled, then the user and password on the API are used. Example The following is an actual example of the interactions between identity-based-connection-pooling-enabled, oracle-proxy-session, and use-database-credentials. On the database side, the following objects are configured.- Database users scott; jdbcqa; jdbcqa3- Permission for proxy: alter user jdbcqa3 grant connect through jdbcqa;- Permission for proxy: alter user jdbcqa grant connect through jdbcqa; The following WebLogic Data Source objects are configured.- Users weblogic, wluser- Credential mapping “weblogic” to “scott”- Credential mapping "wluser" to "jdbcqa3"- Data source descriptor configured with user “jdbcqa”- All tests are run with Set Client ID set to true (more about that below).- All tests are run with oracle-proxy-session set to false (more about that below). The test program:- Runs in servlet- Authenticates to WLS as user “weblogic” Use DB Credentials Identity based getConnection(scott,***) getConnection(weblogic,***) getConnection(jdbcqa3,***) getConnection() true true Identity scottClient weblogicProxy null weblogic fails - not a db user User jdbcqa3Client weblogicProxy null Default user jdbcqaClient weblogicProxy null false true scott fails - not a WLS user User scottClient scottProxy null jdbcqa3 fails - not a WLS user User scottClient scottProxy null true false Proxy for scott fails weblogic fails - not a db user User jdbcqa3Client weblogicProxy jdbcqa Default user jdbcqaClient weblogicProxy null false false scott fails - not a WLS user Default user jdbcqaClient scottProxy null jdbcqa3 fails - not a WLS user Default user jdbcqaClient scottProxy null If Set Client ID is set to false, all cases would have Client set to null. If this was not an Oracle thin driver, the one case with the non-null Proxy in the above table would throw an exception because proxy session is only supported, implicitly or explicitly, with the Oracle thin driver. When oracle-proxy-session is set to true, the only cases that will pass (with a proxy of "jdbcqa") are the following.1. Setting use-database-credentials to true and doing getConnection(jdbcqa3,…) or getConnection().2. Setting use-database-credentials to false and doing getConnection(wluser, …) or getConnection(). Summary There are many options to choose from for data source security. Considerations include the number and volatility of WLS and Database users, the granularity of data access, the depth of the security identity (property on the connection or a real user), performance, coordination of various components in the software stack, and driver capabilities. Now that you have the big picture (remember that table in part 1), you can make a more informed choice.

Read the article

My own personal use of Oracle Linux

- by wcoekaer

It always is easier to explain something with examples... Many people still don't seem to understand some of the convenient things around using Oracle Linux and since I personally (surprise!) use it at home, let me give you an idea. I have quite a few servers at home and I also have 2 hosted servers with a hosted provider. The servers at home I use mostly to play with random Linux related things, or with Oracle VM or just try out various new Oracle products to learn more. I like the technology, it's like a hobby really. To be able to have a good installation experience and use an officially certified Linux distribution and not waste time trying to find the right libraries, I, of course, use Oracle Linux. Now, at least I can get a copy of Oracle Linux for free (even if I was not working for Oracle) and I can/could use that on as many servers at home (or at my company if I worked elsewhere) for testing, development and production. I just go to http://edelivery.oracle.com/linux and download the version(s) I want and off I go. Now, I also have the right (and not because I am an employee) to take those images and put them on my own server and give them to someone else, I in fact, just recently set up my own mirror on my own hosted server. I don't have to remove oracle-logos, I don't have to rebuild the ISO images, I don't have to recompile anything, I can just put the whole binary distribution on my own server without contract. Perfectly free to do so. Of course the source code of all of this is there, I have a copy of the UEK code at home, just cloned from https://oss.oracle.com/git/?p=linux-2.6-unbreakable.git. And as you can see, the entire changelog, checkins, merges from Linus's tree, complete overview of everything that got changed from kernel to kernel, from patch to patch, errata to errata. No obfuscating, no tar balls and spending time with diff, or go read bug reports to find out what changed (seems silly to me). Some of my servers are on the external network and I need to be current with security errata, but guess what, no problem, my servers are hooked up to http://public-yum.oracle.com which is open, free, and completely up to date, in a consistent, reliable way with any errata, security or bugfix. So I have nothing to worry about. Also, not because I am an employee. Anyone can. And, with this, I also can, and have, set up my own mirror site that hosts these RPMs. both binary and source rpms. Because I am free to get them and distribute them. I am quite capable of supporting my servers on my own, so I don't need to rely on the support organization so I don't need to have a support subscription :-). So I don't need to pay. Neither would you, at least not with Oracle Linux. Another cool thing. The hosted servers came (unfortunately) with Centos installed. While Centos works just fine as is, I tend to prefer to be current with my security errata(reliably) and I prefer to just maintain one yum repository instead of 2, I converted them over to Oracle Linux as well (in place) so they happily receive and use the exact same RPMs. Since Oracle Linux is exactly the same from a user/application point of view as RHEL, including files like /etc/redhat-release and no changes from .el. to .centos. I know I have nothing to worry about installing one of the RHEL applications. So, OL everywhere makes my life a lot easier and why not... Next! Since I run Oracle VM and I have -tons- of VM's on my machines, in some cases on my big WOPR box I have 15-20 VMs running. Well, no problem, OL is free and I don't have to worry about counting the number of VMs, whether it's 1, or 4, or more than 10 ... like some other alternatives started doing... and finally :) I like to try out new stuff, not 3 year old stuff. So with UEK2 as part of OL6 (and 6.3 in particular) I can play with a 3.0.x based kernel and it just installs and runs perfectly clean with OL6, so quite current stuff in an environment that I know works, no need to toy around with an unsupported pre-alpha upstream distribution with libraries and versions that are not compatible with production software (I have nothing against ubuntu or fedora or opensuse... just not what I can rely on or use for what I need, and I don't need a desktop). pretty compelling. I say... and again, it doesn't matter that I work for Oracle, if I was working elsewhere, or not at all, all of the above would still apply. Student, teacher, developer, whatever. contrast this with $349 for 2 sockets and oneguest and selfsupport per year to even just get the software bits.

Read the article

Yet Another ASP.NET MVC CRUD Tutorial

- by Ricardo Peres

I know that I have not posted much on MVC, mostly because I don’t use it on my daily life, but since I find it so interesting, and since it is gaining such popularity, I will be talking about it much more. This time, it’s about the most basic of scenarios: CRUD. Although there are several ASP.NET MVC tutorials out there that cover ordinary CRUD operations, I couldn’t find any that would explain how we can have also AJAX, optimistic concurrency control and validation, using Entity Framework Code First, so I set out to write one! I won’t go into explaining what is MVC, Code First or optimistic concurrency control, or AJAX, I assume you are all familiar with these concepts by now. Let’s consider an hypothetical use case, products. For simplicity, we only want to be able to either view a single product or edit this product. First, we need our model: 1: public class Product 2: { 3: public Product() 4: { 5: this.Details = new HashSet<OrderDetail>(); 6: } 7: 8: [Required] 9: [StringLength(50)] 10: public String Name 11: { 12: get; 13: set; 14: } 15: 16: [Key] 17: [ScaffoldColumn(false)] 18: [DatabaseGenerated(DatabaseGeneratedOption.Identity)] 19: public Int32 ProductId 20: { 21: get; 22: set; 23: } 24: 25: [Required] 26: [Range(1, 100)] 27: public Decimal Price 28: { 29: get; 30: set; 31: } 32: 33: public virtual ISet<OrderDetail> Details 34: { 35: get; 36: protected set; 37: } 38: 39: [Timestamp] 40: [ScaffoldColumn(false)] 41: public Byte[] RowVersion 42: { 43: get; 44: set; 45: } 46: } Keep in mind that this is a simple scenario. Let’s see what we have: A class Product, that maps to a product record on the database; A product has a required (RequiredAttribute) Name property which can contain up to 50 characters (StringLengthAttribute); The product’s Price must be a decimal value between 1 and 100 (RangeAttribute); It contains a set of order details, for each time that it has been ordered, which we will not talk about (Details); The record’s primary key (mapped to property ProductId) comes from a SQL Server IDENTITY column generated by the database (KeyAttribute, DatabaseGeneratedAttribute); The table uses a SQL Server ROWVERSION (previously known as TIMESTAMP) column for optimistic concurrency control mapped to property RowVersion (TimestampAttribute). Then we will need a controller for viewing product details, which will located on folder ~/Controllers under the name ProductController: 1: public class ProductController : Controller 2: { 3: [HttpGet] 4: public ViewResult Get(Int32 id = 0) 5: { 6: if (id != 0) 7: { 8: using (ProductContext ctx = new ProductContext()) 9: { 10: return (this.View("Single", ctx.Products.Find(id) ?? new Product())); 11: } 12: } 13: else 14: { 15: return (this.View("Single", new Product())); 16: } 17: } 18: } If the requested product does not exist, or one was not requested at all, one with default values will be returned. I am using a view named Single to display the product’s details, more on that later. As you can see, it delegates the loading of products to an Entity Framework context, which is defined as: 1: public class ProductContext: DbContext 2: { 3: public DbSet<Product> Products 4: { 5: get; 6: set; 7: } 8: } Like I said before, I’ll keep it simple for now, only aggregate root Product is available. The controller will use the standard routes defined by the Visual Studio ASP.NET MVC 3 template: 1: routes.MapRoute( 2: "Default", // Route name 3: "{controller}/{action}/{id}", // URL with parameters 4: new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults 5: ); Next, we need a view for displaying the product details, let’s call it Single, and have it located under ~/Views/Product: 1: <%@ Page Language="C#" Inherits="System.Web.Mvc.ViewPage<Product>" %> 2: <!DOCTYPE html> 3: 4: <html> 5: <head runat="server"> 6: <title>Product</title> 7: <script src="/Scripts/jquery-1.7.2.js" type="text/javascript"></script> 1: 2: <script src="/Scripts/jquery-ui-1.8.19.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.unobtrusive-ajax.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.validate.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.validate.unobtrusive.js" type="text/javascript"> 1: </script> 2: <script type="text/javascript"> 3: function onFailure(error) 4: { 5: } 6: 7: function onComplete(ctx) 8: { 9: } 10: 11: </script> 8: </head> 9: <body> 10: <div> 11: <% 1: : this.Html.ValidationSummary(false) %> 12: <% 1: using (this.Ajax.BeginForm("Edit", "Product", new AjaxOptions{ HttpMethod = FormMethod.Post.ToString(), OnSuccess = "onSuccess", OnFailure = "onFailure" })) { %> 13: <% 1: : this.Html.EditorForModel() %> 14: <input type="submit" name="submit" value="Submit" /> 15: <% 1: } %> 16: </div> 17: </body> 18: </html> Yes… I am using ASPX syntax… sorry about that! I implemented an editor template for the Product class, which must be located on the ~/Views/Shared/EditorTemplates folder as file Product.ascx: 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<Product>" %> 2: <div> 3: <%: this.Html.HiddenFor(model => model.ProductId) %> 4: <%: this.Html.HiddenFor(model => model.RowVersion) %> 5: <fieldset> 6: <legend>Product</legend> 7: <div class="editor-label"> 8: <%: this.Html.LabelFor(model => model.Name) %> 9: </div> 10: <div class="editor-field"> 11: <%: this.Html.TextBoxFor(model => model.Name) %> 12: <%: this.Html.ValidationMessageFor(model => model.Name) %> 13: </div> 14: <div class="editor-label"> 15: <%= this.Html.LabelFor(model => model.Price) %> 16: </div> 17: <div class="editor-field"> 18: <%= this.Html.TextBoxFor(model => model.Price) %> 19: <%: this.Html.ValidationMessageFor(model => model.Price) %> 20: </div> 21: </fieldset> 22: </div> One thing you’ll notice is, I am including both the ProductId and the RowVersion properties as hidden fields; they will come handy later or, so that we know what product and version we are editing. The other thing is the included JavaScript files: jQuery, jQuery UI and unobtrusive validations. Also, I am not using the Content extension method for translating relative URLs, because that way I would lose JavaScript intellisense for jQuery functions. OK, so, at this moment, I want to add support for AJAX and optimistic concurrency control. So I write a controller method like this: 1: [HttpPost] 2: [AjaxOnly] 3: [Authorize] 4: public JsonResult Edit(Product product) 5: { 6: if (this.TryValidateModel(product) == true) 7: { 8: using (BlogContext ctx = new BlogContext()) 9: { 10: Boolean success = false; 11: 12: ctx.Entry(product).State = (product.ProductId == 0) ? EntityState.Added : EntityState.Modified; 13: 14: try 15: { 16: success = (ctx.SaveChanges() == 1); 17: } 18: catch (DbUpdateConcurrencyException) 19: { 20: ctx.Entry(product).Reload(); 21: } 22: 23: return (this.Json(new { Success = success, ProductId = product.ProductId, RowVersion = Convert.ToBase64String(product.RowVersion) })); 24: } 25: } 26: else 27: { 28: return (this.Json(new { Success = false, ProductId = 0, RowVersion = String.Empty })); 29: } 30: } So, this method is only valid for HTTP POST requests (HttpPost), coming from AJAX (AjaxOnly, from MVC Futures), and from authenticated users (Authorize). It returns a JSON object, which is what you would normally use for AJAX requests, containing three properties: Success: a boolean flag; RowVersion: the current version of the ROWVERSION column as a Base-64 string; ProductId: the inserted product id, as coming from the database. If the product is new, it will be inserted into the database, and its primary key will be returned into the ProductId property. Success will be set to true; If a DbUpdateConcurrencyException occurs, it means that the value in the RowVersion property does not match the current ROWVERSION column value on the database, so the record must have been modified between the time that the page was loaded and the time we attempted to save the product. In this case, the controller just gets the new value from the database and returns it in the JSON object; Success will be false. Otherwise, it will be updated, and Success, ProductId and RowVersion will all have their values set accordingly. So let’s see how we can react to these situations on the client side. Specifically, we want to deal with these situations: The user is not logged in when the update/create request is made, perhaps the cookie expired; The optimistic concurrency check failed; All went well. So, let’s change our view: 1: <%@ Page Language="C#" Inherits="System.Web.Mvc.ViewPage<Product>" %> 2: <%@ Import Namespace="System.Web.Security" %> 3: 4: <!DOCTYPE html> 5: 6: <html> 7: <head runat="server"> 8: <title>Product</title> 9: <script src="/Scripts/jquery-1.7.2.js" type="text/javascript"></script> 1: 2: <script src="/Scripts/jquery-ui-1.8.19.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.unobtrusive-ajax.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.validate.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.validate.unobtrusive.js" type="text/javascript"> 1: </script> 2: <script type="text/javascript"> 3: function onFailure(error) 4: { 5: window.alert('An error occurred: ' + error); 6: } 7: 8: function onSuccess(ctx) 9: { 10: if (typeof (ctx.Success) != 'undefined') 11: { 12: $('input#ProductId').val(ctx.ProductId); 13: $('input#RowVersion').val(ctx.RowVersion); 14: 15: if (ctx.Success == false) 16: { 17: window.alert('An error occurred while updating the entity: it may have been modified by third parties. Please try again.'); 18: } 19: else 20: { 21: window.alert('Saved successfully'); 22: } 23: } 24: else 25: { 26: if (window.confirm('Not logged in. Login now?') == true) 27: { 28: document.location.href = '<%: FormsAuthentication.LoginUrl %>?ReturnURL=' + document.location.pathname; 29: } 30: } 31: } 32: 33: </script> 10: </head> 11: <body> 12: <div> 13: <% 1: : this.Html.ValidationSummary(false) %> 14: <% 1: using (this.Ajax.BeginForm("Edit", "Product", new AjaxOptions{ HttpMethod = FormMethod.Post.ToString(), OnSuccess = "onSuccess", OnFailure = "onFailure" })) { %> 15: <% 1: : this.Html.EditorForModel() %> 16: <input type="submit" name="submit" value="Submit" /> 17: <% 1: } %> 18: </div> 19: </body> 20: </html> The implementation of the onSuccess function first checks if the response contains a Success property, if not, the most likely cause is the request was redirected to the login page (using Forms Authentication), because it wasn’t authenticated, so we navigate there as well, keeping the reference to the current page. It then saves the current values of the ProductId and RowVersion properties to their respective hidden fields. They will be sent on each successive post and will be used in determining if the request is for adding a new product or to updating an existing one. The only thing missing is the ability to insert a new product, after inserting/editing an existing one, which can be easily achieved using this snippet: 1: <input type="button" value="New" onclick="$('input#ProductId').val('');$('input#RowVersion').val('');"/> And that’s it.

Read the article

On automating a split-mirror ASM backup with EMC TimeFinder ...

- by [email protected]

Normal 0 21 false false false MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Hi clerks, Offloading the backup operation to another host using disk cloning could really improve the performance on highly busy databases ( 24x7, zero downtime and all this stuff ...) There are well know white papers on this subject, ASM included, but today Im showing you a nice way to automate the procedure using shell scripting with EMC TimeFinder technologies: Assumptions: *********** ASM diskgroups name: +data_${db_name} : asm data diskgroup +fra_${db_name} : asm fra diskgroup EMC Time Finder sync groups name: rac_${DB_NAME}_data_tf : data group rac_${DB_NAME}_fra_tf: fra group There are two scripts, one located on the production box ( bck_database.sh ) and the other one on the backup server node ( bck_database_mirror.sh ) The second one is remotly executed from the production host There are a bunch of variables along the code with selfexplanatory names I guess, anyway let me know if you want some help #!/bin/ksh ### ### Copyright (c) 1988, 2010, Oracle Corporation. All Rights Reserved. ### ### NAME ### bck_database.sh ### ### DESCRIPTION ### Database backup on third mirror ### ### RETURNS ### ### NOTES ### ### MODIFIED (DD/MM/YY) ### Oracle 28/01/10 - Creacion ### V_DATE=`/bin/date +%Y%m%d_%H%M%S` V_FICH_LOG=`dirname $0`/trace_dir_location/`basename $0`.${V_DATE}.log exec 4>&1 tee ${V_FICH_LOG} >&4 |& exec 1>&p 2>&1 ADMIN_DIR=`dirname $0` . ${ADMIN_DIR}/setenv_instance.sh -- This script should set the instance vars like Oracle Home, Sid, db_name ... if [ $? -ne 0 ] then echo "Error when setting the environment." exit 1 fi echo "${V_DATE} ####################################################" echo "Executing database backup: ${DB_NAME}" echo "####################################################################" V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Sync asm data diskgroups ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_data_tf establish -noprompt if [ $? -ne 0 ] then echo "Error when sync asm data diskgroups" exit 2 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Verifying asm data disks ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_data_tf -i 30 verify if [ $? -ne 0 ] then echo "Error when verifying asm data diskgroups" exit 3 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Sync asm fra diskgroups ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_fra_tf establish -noprompt if [ $? -ne 0 ] then echo "Error when sync asm fra diskgroups" exit 4 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Verifying asm fra disks ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_fra_tf -i 30 verify if [ $? -ne 0 ] then echo "Error when verifying asm fra diskgroups" exit 5 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "ASM sync sucessfully completed!" echo "####################################################################" V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Updating status ${DB_NAME} to BEGIN BACKUP ..." echo "####################################################################" sqlplus -s /nolog <<-! whenever sqlerror exit 1 connect / as sysdba whenever sqlerror exit alter system archive log current; alter database ${DB_NAME} begin backup; ! if [ $? -ne 0 ] then echo "Error when updating database status to BEGIN backup" exit 6 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Splitting asm data disks....." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_data_tf split -noprompt if [ $? -ne 0 ] then echo "Error when splitting asm data disks" exit 7 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Updating status ${DB_NAME} to END BACKUP ..." echo "####################################################################" sqlplus -s /nolog <<-! whenever sqlerror exit 1 connect / as sysdba whenever sqlerror exit alter database ${DB_NAME} end backup; alter system archive log current; ! if [ $? -ne 0 ] then echo "Error when updating database status to END backup" exit 8 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Generating controlfile copies...." echo "####################################################################" rman<<-! connect target / run { allocate channel ch1 type DISK; copy current controlfile to '+FRA_${DB_NAME}/${DB_NAME}/CONTROLFILE/control_mount.ctl'; copy current controlfile to '+FRA_${DB_NAME}/${DB_NAME}/CONTROLFILE/control_backup.ctl'; } ! if [ $? -ne 0 ] then echo "Error generating controlfile copies" exit 9 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Resync RMAN catalog ....." echo "####################################################################" rman<<-! connect target / connect catalog ${V_RMAN_USR}/${V_RMAN_PWD}@${V_DB_CATALOG} resync catalog; ! if [ $? -ne 0 ] then echo "Error when resyncing RMAN catalog" exit 10 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Splitting asm fra disks....." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_fra_tf split -noprompt if [ $? -ne 0 ] then echo "Error when splitting asm fra disks" exit 11 fi echo "WARNING!: Calling bck_database_mirror.sh host ${NODE_BCK_SERVER}..." ssh ${NODO_BCK_SERVER} ${ADMIN_DIR_BCK}/bck_database_mirror.sh if [ $? -ne 0 ] then echo "Error, when remote executing the backup " exit 12 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Cleaning the archived redo logs already copied to tape ..." echo "####################################################################" rman<<-! connect target / connect catalog ${V_RMAN_USR}/${V_RMAN_PWD}@${V_DB_CATALOG} run { resync catalog; delete noprompt archivelog all backed up 1 times to device type sbt; } ! if [ $? -ne 0 ] then echo "Error when cleaning the archived redo logs" exit 13 fi echo "${V_DATE} ####################################################" echo "Backup sucessfully executed!!" echo "####################################################################" exit 0 ------------------------------------------------------------------------------ ------------------------** BACKUP SERVER NODE ** ----------------------------- ------------------------------------------------------------------------------ #!/bin/ksh ### ### Copyright (c) 1988, 2010, Oracle Corporation. All Rights Reserved. ### ### ### NAME ### bck_database_mirror.sh ### ### DESCRIPTION ### Backup @ backup server ### ### RETURNS ### ### NOTES ### ### MODIFIED (DD/MM/YY) ### Oracle 28/01/10 - Creacion V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Starting ASM instance ..." echo "####################################################################" ${V_ADMIN_DIR}/start_asm.sh -- This script is supposed to start the ASM instance in the backup server if [ $? -ne 0 ] then echo "Error when tying to start ASM instance." exit 1 fi . ${V_ADMIN_DIR}/setenv_asm.sh -- This script is supposed to set the env. variables of the ASM instance if [ $? -ne 0 ] then echo "Error when setting the ASM environment" exit 1 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "The asm diskgroups/disks dettected are the following ..." echo "####################################################################" sqlplus /nolog <<-! whenever sqlerror exit 1 connect / as sysdba whenever sqlerror exit SET LINES 200 COL PATH FORMAT A25 SELECT DISK.MOUNT_STATUS, DISK.PATH, DISK.NAME, DISK_GROUP.NAME, DISK_GROUP.TOTAL_MB FROM V\$ASM_DISK DISK, V\$ASM_DISKGROUP DISK_GROUP WHERE DISK.GROUP_NUMBER=DISK_GROUP.GROUP_NUMBER; ! V_ADMIN_DIR=`dirname $0` . ${V_ADMIN_DIR}/setenv_instance.sh -- This script is supposed to set the env. variables of the database instance if [ $? -ne 0 ] then echo "Error when setting the database instance environment" exit 1 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Starting ${DB_NAME} in MOUNT mode..." echo "####################################################################" ${V_ADMIN_DIR}/start_instance_mount.sh -- This script is supposed to do a startup mount if [ $? -ne 0 ] then echo "Error starting ${DB_NAME} in MOUNT mode" exit 1 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Executing RMAN backup..." echo "####################################################################" rman<<-! connect target / connect catalog ${V_RMAN_USR}/${V_RMAN_PWD}@${V_DB_CATALOG} run { allocate channel ch1 type 'SBT_TAPE' parms'ENV=(TDPO_OPTFILE=/opt/tivoli/tsm/client/oracle/bin64/tdpo.opt)'; -- TDPO Media Library crosscheck archivelog all; backup tag BCK_CONTROLFILE_ST_${DB_NAME} format 'ctl_%d_%s__%p_%t' controlfilecopy '+FRA_${DB_NAME}/${DB_NAME}/CONTROLFILE/control_backup.ctl'; backup tag BCK_DATAFILE_ST_${DB_NAME} full format 'db_%d_%s_%p_%t'database; backup tag BCK_ARCHLOG_ST_${DB_NAME} format 'al_%d_%s_%p_%t' archivelog all; release channel ch1; } ! if [ $? -ne 0 ] then echo "Error executing the RMAN backup" exit 1 fi ${V_ADMIN_DIR}/stop_instance_immediate.sh -- This script is supposed to do a shutdown immediate of the database instance ${ADMIN_DIR}/stop_asm_immediate.sh -- This script is supposed to do a shutdown immediate of the ASM instance exit 0 fi Hope it helps someone! --L

Search Results

Search found 18677 results on 748 pages for 'current'.

Page 114/748 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121 | Next Page >

- by Mysticgeek

- by Rick Strahl

- by Dylan Smith

- by BuckWoody

- by mbridge

- by james.bayer

- by DigiMortal

- by Your DisplayName here!

- by MarkPearl

- by cibrax

- by Grant Fritchey

- by darrenm

- by LaMinifalda

- by nmarun

- by S Stelting

- by João Angelo

- by user26766

- by Martin Hinshelwood

- by frank.nimphius

- by MarkH

- by Steve Felts

- by wcoekaer

- by Ricardo Peres

- by [email protected]

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121 | Next Page >