Search Results

Search found 3266 results on 131 pages for 'dell dimension'.

Page 114/131 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

  • USB Drive Warm Boot Issue. Cold boot = Perfect. Warm boot = "No boot sector found on USB device"

    - by Dan
    I'm experiencing a boot/reboot quirk similar to, yet somewhat different from others posted here. I have two Western Digital "Passport" external USB2 drives (160GB and 320GB) with Ubuntu 11.10 installed. The BIOS on my laptop is set to boot USB drives before the internal drive, and it works well. Either drive will cold-boot Ubuntu 11.10 perfectly. However, at times the computer must be restarted (warm boot) to have software updates or other changes take effect. When I warm-boot the computer, the computer goes through its normal shutdown/restart, then the usual BIOS tests, at which time the USB drive is selected momentarily (as normal), and that's when the trouble starts. I get a "No boot sector found on USB device", and the computer proceeds to boot Windows from the internal drive. If I press F12 early during the restart sequence (allows manual selection of the boot sequence), USB is still shown before the internal drive on the sequence list (as it should be). If I highlight "USB" and press ENTER, I still get a "No boot sector..." error message, but the external USB drive then proceeds to boot Ubuntu normally. I have a third external USB drive (Western Digital 160 GB Media Center) that cold-boots and warm-boots perfectly, so I know everything in the computer is set up properly. It also tells me Ubuntu is set up correctly on the drives, as all three drives were done identically, and at the same time. I've tried formatting the Passport drives NTFS and FAT32, but it didn't change anything. If I power-down the computer, then start it up again, it will boot Ubuntu from either of the Passport drives perfectly - every time. It's as if during a warm boot the Passport drives are somehow looking for the boot loader in the wrong location on the drive - yet either drives works when booting from a cold start. Not a show-stopper .. but frustrating. Computer is a Dell XPS M1530, A12 BIOS (latest), but I don't think the computer plays into the issue because one of the three drives works at all times. It's only the two WD Passport models at issue here. Thanks!

    Read the article

  • Why does the login screen fail to appear?

    - by a different ben
    My system: Dell Precision T3500 nVidia Quadro NVS 295 Ubuntu 12.04 x86_64 (3.2.0-32) Essential problem: On boot my system won't get past the splash screen. I can switch to another virtual terminal and log in, I can also ssh from another system -- so it appears that the problem might be with the display manager. How can I diagnose and fix this problem? More info: From a VT I can issue sudo lightdm restart, and this will bring up the login screen and and I can continue from there. So I do have access to my system. Update-manager recently updated a number of packages, including a bunch of x11 and xorg packages, some nVidia drivers, rpcbind, etc etc. My boot log (if that is any guidance) says the following: fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 rpcbind: Cannot open '/run/rpcbind/rpcbind.xdr' file for reading, errno 2 (No such file or directory) rpcbind: Cannot open '/run/rpcbind/portmap.xdr' file for reading, errno 2 (No such file or directory) /dev/sda1: clean, 597650/1525920 files, 3963433/6103296 blocks /dev/sda7: clean, 11/6406144 files, 450097/25608703 blocks /dev/sda5: clean, 158323/1525920 files, 1886918/6103296 blocks /dev/sda8: clean, 250089/107929600 files, 111088810/431689728 blocks Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles [80G [74G[ OK ] Loading the saved-state of the serial devices... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A * Starting ClamAV virus database updater freshclam [80G [74G[ OK ] * Starting Name Service Cache Daemon nscd [80G [74G[ OK ] * Starting modem connection manager[74G[ OK ] * Starting K Display Manager[74G[ OK ] * Starting mDNS/DNS-SD daemon[74G[ OK ] * Stopping GNOME Display Manager[74G[ OK ] * Stopping K Display Manager[74G[ OK ] * Starting bluetooth daemon[74G[ OK ] * Starting network connection manager[74G[ OK ] * Starting Postfix Mail Transport Agent postfix [80G [74G[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher * Starting VirtualBox kernel modules [80G [74G[ OK ] * Starting the Winbind daemon winbind [80G [74G[ OK ] saned disabled; edit /etc/default/saned * Starting anac(h)ronistic cron[74G[ OK ] * Stopping anac(h)ronistic cron[74G[ OK ] * Checking battery state... [80G [74G[ OK ] nxsensor is disabled in '/usr/NX/etc/node.cfg' Trying to start NX server: NX 122 Service started. NX 999 Bye. Trying to start NX statistics: NX 723 Cannot start NX statistics: NX 709 NX statistics are disabled for this server. NX 999 Bye. * Stopping System V runlevel compatibility[74G[ OK ] * Starting Mount network filesystems[74G[ OK ] * Stopping Mount network filesystems[74G[ OK ] * Stopping regular background program processing daemon[74G[ OK ] * Starting regular background program processing daemon[74G[ OK ] * Starting anac(h)ronistic cron[74G[ OK ] * Stopping anac(h)ronistic cron[74G[ OK ]

    Read the article

  • 5.1 surround sound

    - by rocker9455
    Ok, So i've always had trouble with enabling 5.1 in ubuntu. Running 'alsamixer': I have: Master, Heaphones, PCM, Front, Front Mi, Front Mi, Surround, Center All are at 100% Card:HDA Intel Chip:Realtek ALC888 (This is my onboard sound, Its a dell studio, with 7.1 integrated sound) Running "speaker-test -c6 -twav" I only get the front 2 speakers (Right/Left) making any noise. The others make no noise at all. I have no other sound card to use as all my PCI slots are used up. Daemon.conf: ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10

    Read the article

  • Ubuntu doesn't "see" external USB Hard Disk

    - by Mina Michael
    It's NTFS. It's USB2. I'm using Ubuntu 13.04. It works perfectly fine on Windows (which excludes cable and hardware problems). I have two Ubuntu computers and it's not detected on either. It's about 500 GB. Edits: Following the first link, I input sudo lsusb in a terminal; before and after connecting the HDD. The difference was Bus 001 Device 012: ID 14cd:6116 Super Top M6116 SATA Bridge. There it is! ("sata bridge" used to appear in a windows notification when I plugged in the HDD in!). ...This means that Ubuntu detects it but is it not mounting it? I tried this: sudo mount /dev/sdb1 /mnt But gives this: mount: special device /dev/sdb1 does not exist I also tried: sudo mount /dev/sdc1 /mnt but it stays with no output forever. I left it in background for about 30 min.s. sudo fdisk -l gives out this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa42d04a3 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 80325 102481919 51200797+ 7 HPFS/NTFS/exFAT /dev/sda3 263874558 312580095 24352769 5 Extended /dev/sda4 102481920 263872511 80695296 7 HPFS/NTFS/exFAT /dev/sda5 263874560 310505471 23315456 83 Linux /dev/sda6 310507520 312580095 1036288 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5822aaea Device Boot Start End Blocks Id System /dev/sdc1 2048 976769023 488383488 7 HPFS/NTFS/exFAT The part below "Partition table entries are not in disk order" takes about 5 minutes to appear. The outputs of ls /dev/ | grep sd before and after connecting the HDD: before: sda sda1 sda2 sda3 sda4 sda5 sda6 ,after: sda sda1 sda2 sda3 sda4 sda5 sda6 sdd sdd1 The second output has the lines sdd and sdd1 different from the first one. IT SHOWED THE FILES!! The command sudo mount /dev/sdd1 /mnt worked after I typed in sudo fdisk -l!!! Thanks a million!! :) :)

    Read the article

  • Automatically change resolution when not in dock

    - by jwir3
    I have Ubuntu 11.04 (yep, I know it's old news) on my Lenovo W520. At home, I have a dock with dual monitors. I have a pretty decent setup - things work almost perfectly (hence the reason I'm reluctant to upgrade... that and I'm not 100% sold on Unity). Anyway, the only annoyance I have is that when I'm on travel, I use the laptop screen. When I un-dock the laptop, I need to manually go into nvidia x-server settings and change the resolution from 'Auto' to 1920x1200, or it will think I have two screens, and my mouse pointer will be able to go way off the left side of the screen. This isn't a big deal, but I need to do it every time I restart the x-server (so if I reboot, or have to kill it, etc...) What would be really nice is if there was a way for it to automatically detect whether or not there is external monitors (which it seems to do already), and switch into the mode I select, depending on which monitors are connected. Is there any way to accomplish this? I've posted my xorg.conf file for reference. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 275.19 ([email protected]) Tue Jul 12 18:35:38 PDT 2011 #Section "Monitor" # Identifier "Monitor1" # VendorName "Lenovo" # ModelName "ThinkpadLCD" # #HorizSync 28.0 - 33.0 # #VertRefresh 43.0 - 72.0 # #Option "DPMS" #EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "DELL U2410" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" Option "RegistryDwords" "EnableBrightnessControl=1" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-6: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-5: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +1920+419, DFP-5: nvidia-auto-select +3840+0, DFP-6: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-5: nvidia-auto-select +0+0, DFP-6: 1920x1200 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "NoLogo" "True" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "TwinView" "1" Option "metamodes" "DFP-5: nvidia-auto-select +1920+0, DFP-6: 1920x1200 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Misused mke2fs and cannot boot into system

    - by surlogics
    I installed Ubuntu with WUBI in Windows 7 64bit, and I had installed Mandriva 2011 with a disk. I tried to learn Linux with Ubuntu and misused mke2fs; after I reboot my computer, Windows 7 and Ubuntu has crashed. As I have Mandriva, I boot into Mandriva and found # df -h /dev/sda7 12G 9.8G 1.5G 88% / /dev/sda2 15G 165M 14G 2% /media/logical /dev/sda6 119G 88G 32G 74% /media/2C9E85319E84F51C /dev/sda5 118G 59G 60G 50% /media/D25A6DDE5A6DBFB9 /dev/sda9 100G 188M 100G 1% /media/ae69134a-a65e-488f-ae7f-150d1b5e36a6 /dev/sda1 100M 122K 100M 1% /media/DELLUTILITY /dev/sda3 98G 81G 17G 83% /media/OS # fdisk /dev/sda Command (m for help): p Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd24f801e Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 6 FAT16 /dev/sda2 * 206848 30926847 15360000 7 HPFS/NTFS/exFAT /dev/sda3 30926848 235726847 102400000 7 HPFS/NTFS/exFAT /dev/sda4 235728864 976771071 370521104 f W95 Ext'd (LBA) /dev/sda5 235728896 481488895 122880000 7 HPFS/NTFS/exFAT /dev/sda6 727252992 976771071 124759040 7 HPFS/NTFS/exFAT /dev/sda7 481500243 506674034 12586896 83 Linux /dev/sda8 506674098 514851119 4088511 82 Linux swap / Solaris /dev/sda9 514851183 727246484 106197651 83 Linux Partition table entries are not in disk order I think I may used the following command mke2fs -j -L "logical"/dev/sda2 but I had forgotten what kind of partition it was before I transfered it into ext3. perhaps ntfs Data was not lost, and I can view my files as I could in Windows. In Mandriva, there are following disks: 117.2 GB hard disk, files in it is the same as my Windows D:, and Ubuntu was installed in it; 119.0 GB hard disk is my G:, with my personal files in it; 12.0 GB is the same with Mandriva / (with means root), 101.3 GB hard disk with nothing but lost+found; DELLUTILITY should be Dell computer utilities pre-installed in my computer; logical is the disk which I had spoiled, I can view nothing but lost+found; and OS is the C: in my Windows. After I boot, grub lets me choose Mandriva or Windows. I chose Windows and it tells me: FILE system type unknown, partition type 0x7 Error 13: Invalid or unsupported executable format I doubt something wrong with windows MBR or something # cat /boot/grub/menu.lst timeout 5 color black/cyan yellow/cyan gfxmenu (hd0,6)/boot/gfxmenu default 0 title linux kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot logo.nologo quiet resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd splash=silent vga=788 initrd (hd0,6)/boot/initrd.img title linux-nonfb kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd initrd (hd0,6)/boot/initrd.img title failsafe kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot failsafe initrd (hd0,6)/boot/initrd.img title windows root (hd0,1) makeactive chainloader +1 I can boot into Linux, but not Ubuntu, it boot into Mandriva. I don't have a boot disk. Help me find a way to make it work again.

    Read the article

  • "shutting down hyper-v virtual machine management service"

    - by icelava
    I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE As per answer report, it eventually restarted itself.

    Read the article

  • Git on Windows 7 expecting Linux? /dev/null not found error

    - by Klikini
    I have installed git (not GitHub) on Windows 7 x64 Home Premium, and I cannot get it to work. Opening Git Bash outputs the following: Welcome to Git (version 1.9.4-preview20140815) Run 'git help git' to display the help index. Run 'get help <command>' to display help for specific commands. sh.exe": /dev/null: No such file or directory sh.exe": /dev/null: No such file or directory sh.exe": /dev/null: No such file or directory sh.exe": /dev/null: No such file or directory sh.exe": /dev/null: No such file or directory sh.exe": /dev/null: No such file or directory Andy@ANDY-DELL ~ $ If I open the Git GUI, I get a this box: Title: git-gui: fatal error Content: fatal: open /dev/null or dup failed: No such file or directory Git Gui requires Git 1.5.0 or later. I also tried GitHub for Windows, but I got an internet connection error when attempting to clone a repo, even though my connection is fine. Is this possibly related? I have learned so far that /dev/null is the Linux version of the Windows NUL, but why is it trying to do this on Windows? Thanks in advance.

    Read the article

  • SCCM Report to identify machines with 64-bit capable hardware

    - by GAThrawn
    Currently looking at deployment options for Windows 7. One of the questions we're looking into is 32 bit vs 63 bit. I'm trying to run a SCCM report against our estate to identify which machines are 64-bit capable (whether or not they're currently running a 64-bit OS). There seem to be a few resources out on the net for this (here, here and here) but none of them seem to work right on machines running 32-bit Windows XP. 32-bit XP machines seem to always report that they're running on 32-bit hardware. The query I'm currently running is: select sys.netbios_name0, sys.Operating_System_Name_and0 as OperatingSystem, case when pr.addresswidth0=64 then '64bit OS' when pr.addresswidth0=32 then '32bit OS' end as [Operating System Type], case when pr.DataWidth0=64 then '64bit Processor' when pr.DataWidth0=32 then '32bit Processor' end as [Processor Type], case when pr.addresswidth0=32 and pr.DataWidth0=64 then 'YES' end as [32-bit OS on x64 processor] from v_r_system sys join v_gs_processor pr on sys.resourceid=pr.resourceid I've also tried this, which reports all "Windows XP Professional" systems are on "X86-based PC", not x64 based even though a number of them definitely are: select OS.Caption0, CS.SystemType0, Count(*) from dbo.v_GS_COMPUTER_SYSTEM CS Left Outer Join dbo.v_GS_OPERATING_SYSTEM OS on CS.ResourceID = OS.ResourceId Group by OS.Caption0, CS.SystemType0 Order by OS.Caption0, CS.SystemType0 For instance we have a set of Dell Latitude E4200 laptops. Some of these are running 32-bit Windows XP SP3, some of them are running 32-bit Windows 7, some are running 64-bit Windows 7. All the laptops are identical, having come from the same order. Out of these the Windows 7 (32 and 64-bit) report that the hardware is 64-bit capable, and the Windows XP machines report that they're only 32-bit capable. Does anyone know if there's another value I can query to get the hardware's capabilities correctly on XP, or is there a hotfix that will get it reporting the correct info?

    Read the article

  • SQL Server 2008 Cluster Installation - First network name always fails

    - by boflynn
    I'm testing failover clustering in Windows Server 2008 to host a SQL Server 2008 installation using this installation guide. My base cluster is installed and working properly, as well as clustering the DTC service. However, when it comes time to install SQL Server, my first attempt at installation always fails with the same message and seems to "taint" the network name. For example, with my previous cluster attempt, I was installing SQL Server as VSQL. After approximately 15 attempts of installation and trying to resolve the errors, e.g. changing domain accounts for SQL, setting SPNs, etc., I typoed the network name as VQSL and the installation worked. Similarly on my current cluster, I tried installing with the SQL service named PROD-C1-DB and got the same errors as last time until I tried changing the name to anything else, e.g. PROD-C1-DB1, SQL, TEST, etc., at which point the install works. It will even install to VSQL now. While testing, my install routine was: Run setup.exe from patched media, selecting appropriate options After the install fails, I'd chose "Remove node from a SQL Server failover cluster" and remove the single, failed, node Attempt to diagnose problem, inspect event logs, etc. Delete the computer account that was created for the SQL Service from Active Directory Delete the MSSQL10.MSSQLSERVER folder from the shared data drive The error message I receive from the SQL Server installer is: The following error has occurred: The cluster resource 'SQL Server' could not be brought online. Error: The group or resource is not in the correct state to perform the requested operation. (Exception from HRESULT: 0x8007139F) Along with hundreds of the following errors in the Application event log: [sqsrvres] checkODBCConnectError: sqlstate = 28000; native error = 4818; message = [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. System configuration notes: Windows Server 2008 Enterprise Edition x64 SQL Server 2008 Enterprise Edition x64 using slipstreamed SP1+CU1 media Dell PowerEdge servers Fibre attached storage

    Read the article

  • Bad disk performance on HP DL360 with Smarty Array P400i RAID controller

    - by sarge
    I have a HP DL360 server with 4x 146GB SAS disks and a Smart Array P400i RAID controller with 256MB cache. The disks are in RAID 5 (3 disks + 1 hot spare). The server is running VMware ESX 3i. The disk write performance is really bad. Here are some numbers: ns1:~# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 3364 MB in 2.00 seconds = 1685.69 MB/sec Timing buffered disk reads: 18 MB in 3.79 seconds = 4.75 MB/sec ns1:~# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=125000 && sync" 125000+0 records in 125000+0 records out 1024000000 bytes (1.0 GB) copied, 282.307 s, 3.6 MB/s real 4m52.003s user 0m2.160s sys 3m10.796s Compared to another server those number are terrible: Dell R200, 2x 500GB SATA disks, PERC raid controller (disks are mirrored). web4:~# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 6584 MB in 2.00 seconds = 3297.79 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.79 MB/sec web4:~# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=125000 && sync" 125000+0 records in 125000+0 records out 1024000000 bytes (1.0 GB) copied, 35.2919 s, 29.0 MB/s real 0m36.570s user 0m0.476s sys 0m32.298s The server isn't very loaded and the VMware Infrastructure Client performance monitor is showing 550KBps average read and 1208KBps average write for the last 30 minutes (highest write rate: 6.6MBps). This has been a problem from the start. Any ideas?

    Read the article

  • New Product: Oracle Java ME Embedded 3.2 – Small, Smart, Connected

    - by terrencebarr
    The Internet of Things (IoT) is coming. And, with todays launch of the Oracle Java ME Embedded 3.2 product, Java is going to play an even greater role in it. Java in the Internet of Things By all accounts, intelligent embedded devices are penetrating the world around us – driving industrial processes, monitoring environmental conditions, providing better health care, analyzing and processing data, and much more. And these devices are becoming increasingly connected, adding another dimension of utility. Welcome to the Internet of Things. As I blogged yesterday, this is a huge opportunity for the Java technology and ecosystem. To enable and utilize these billions of devices effectively you need a programming model, tools, and protocols which provide a feature-rich, consistent, scalable, manageable, and interoperable platform.  Java technology is ideally suited to address these technical and business problems, enabling you eliminate many of the typical challenges in designing embedded solutions. By using Java you can focus on building smarter, more valuable embedded solutions faster. To wit, Java technology is already powering around 10 billion devices worldwide. Delivering on this vision and accelerating the growth of embedded Java solutions, Oracle is today announcing a brand-new product: Oracle Java Micro Edition (ME) Embedded 3.2, accompanied by an update release of the Java ME Software Development Kit (SDK) to version 3.2. What is Oracle Java ME Embedded 3.2? Oracle Java ME Embedded 3.2 is a complete Java runtime client, optimized for ARM architecture connected microcontrollers and other resource-constrained systems. The product provides dedicated embedded functionality and is targeted for low-power, limited memory devices requiring support for a range of network services and I/O interfaces.  What features and APIs are provided by Oracle Java ME Embedded 3.2? Oracle Java ME Embedded 3.2 is a Java ME runtime based on CLDC 1.1 (JSR-139) and IMP-NG (JSR-228). The runtime and virtual machine (VM) are highly optimized for embedded use. Also included in the product are the following optional JSRs and Oracle APIs: File I/O API’s (JSR-75)  Wireless Messaging API’s (JSR-120) Web Services (JSR-172) Security and Trust Services subset (JSR-177) Location API’s (JSR-179) XML API’s (JSR-280)  Device Access API Application Management System (AMS) API AccessPoint API Logging API Additional embedded features are: Remote application management system Support for continuous 24×7 operation Application monitoring, auto-start, and system recovery Application access to peripheral interfaces such as GPIO, I2C, SPIO, memory mapped I/O Application level logging framework, including option for remote logging Headless on-device debugging – source level Java application debugging over IP Connection Remote configuration of the Java VM What type of platforms are targeted by Oracle Java ME 3.2 Embedded? The product is designed for embedded, always-on, resource-constrained, headless (no graphics/no UI), connected (wired or wireless) devices with a variety of peripheral I/O.  The high-level system requirements are as follows: System based on ARM architecture SOCs Memory footprint (approximate) from 130 KB RAM/350KB ROM (for a minimal, customized configuration) to 700 KB RAM/1500 KB ROM (for the full, standard configuration)  Very simple embedded kernel, or a more capable embedded OS/RTOS At least one type of network connection (wired or wireless) The initial release of the product is delivered as a device emulation environment for x86/Windows desktop computers, integrated with the Java ME SDK 3.2. A standard binary of Oracle Java ME Embedded 3.2 for ARM KEIL development boards based on ARM Cortex M-3/4 (KEIL MCBSTM32F200 using ST Micro SOC STM32F207IG) will soon be available for download from the Oracle Technology Network (OTN).  What types of applications can I develop with Oracle Java ME Embedded 3.2? The Oracle Java ME Embedded 3.2 product is a full-featured embedded Java runtime supporting applications based on the IMP-NG application model, which is derived from the well-known MIDP 2 application model. The runtime supports execution of multiple concurrent applications, remote application management, versatile connectivity, and a rich set of APIs and features relevant for embedded use cases, including the ability to interact with peripheral I/O directly from Java applications. This rich feature set, coupled with familiar and best-in class software development tools, allows developers to quickly build and deploy sophisticated embedded solutions for a wide range of use cases. Target markets well supported by Oracle Java ME Embedded 3.2 include wireless modules for M2M, industrial and building control, smart grid infrastructure, home automation, and environmental sensors and tracking. What tools are available for embedded application development for Oracle Java ME Embedded 3.2? Along with the release of Oracle Java ME Embedded 3.2, Oracle is also making available an updated version of the Java ME Software Development Kit (SDK), together with plug-ins for the NetBeans and Eclipse IDEs, to deliver a complete development environment for embedded application development.  OK – sounds great! Where can I find out more? And how do I get started? There is a complete set of information, data sheet, API documentation, “Getting Started Guide”, FAQ, and download links available: For an overview of Oracle Embeddable Java, see here. For the Oracle Java ME Embedded 3.2 press release, see here. For the Oracle Java ME Embedded 3.2 data sheet, see here. For the Oracle Java ME Embedded 3.2 landing page, see here. For the Oracle Java ME Embedded 3.2 documentation page, including a “Getting Started Guide” and FAQ, see here. For the Oracle Java ME SDK 3.2 landing and download page, see here. Finally, to ask more questions, please see the OTN “Java ME Embedded” forum To get started, grab the “Getting Started Guide” and download the Java ME SDK 3.2, which includes the Oracle Java ME Embedded 3.2 device emulation.  Can I learn more about Oracle Java ME Embedded 3.2 at JavaOne and/or Java Embedded @ JavaOne? Glad you asked Both conferences, JavaOne and Java Embedded @ JavaOne, will feature a host of content and information around the new Oracle Java ME Embedded 3.2 product, from technical and business sessions, to hands-on tutorials, and demos. Stay tuned, I will post details shortly. Cheers, – Terrence Filed under: Mobile & Embedded Tagged: "Oracle Java ME Embedded", Connected, embedded, Embedded Java, Java Embedded @ JavaOne, JavaOne, Smart

    Read the article

  • Fix ACPI DSDT of Amilo Pa 1538

    - by kayahr
    I have a Fujitsu-Siemens Amilo Pa 1538 laptops and installed Ubuntu 10.04 on it (Kernel 2.6.32). Main problem is that the fans of the notebook are always on even when the temperature is low. Another problem is that the display brightness can not be adjusted. Since some years I use Dell laptops and never experienced any ACPI problems so I thought that it is no longer needed to fix ACPI tables but now I have this crap of a laptop and I think I have to do it. Unfortunately I need some help repairing the DSDT. The dsdt.dat and dsdt.dsl of the laptop can be found here: http://www.ailis.de/~k/permdata/20100420/dsdt/ Compiling the DSDT gives the following output: # iasl -sa dsdt.dsl Intel ACPI Component Architecture ASL Optimizing Compiler version 20090521 [Jun 30 2009] Copyright (C) 2000 - 2009 Intel Corporation Supports ACPI Specification Revision 3.0a dsdt.dsl 81: Method (\_WAK, 1, NotSerialized) Warning 1080 - ^ Reserved method must return a value (_WAK) dsdt.dsl 207: Method (_L10, 0, NotSerialized) Warning 1087 - ^ Not all control paths return a value (_L10) dsdt.dsl 2861: Method (NVIF, 3, NotSerialized) Warning 1087 - ^ Not all control paths return a value (NVIF) dsdt.dsl 4551: Store (\_SB.PCI0.LPC0.PMRD (0xFA), Local0) Warning 1099 - Statement is unreachable ^ ASL Input: dsdt.dsl - 4962 lines, 162828 bytes, 2300 keywords AML Output: dsdt.aml - 17627 bytes, 591 named objects, 1709 executable opcodes Compilation complete. 0 Errors, 4 Warnings, 0 Remarks, 519 Optimizations Anyone here with DSDT experience who can help me fixing the DSDT?

    Read the article

  • Silverlight 5 Hosting :: Features in Silverlight 5 and Release Date

    - by mbridge
    Silverlight 5 is finally announced in the Silverlight FireStarter Event on the 2nd December, 2010. This new version of Silverlight which was earlier labeled as 'Future of Microsoft Silverlight' has now come much closer to go live as the first Silverlight 5 Beta version is expected to be shipped during the early months of 2011. However for the full fledged and the final release of Silverlight 5, we have to wait many more months as the same is likely to be made available within the Q3 2011. As would have been usually expected, this latest edition would feature many new capabilities thereby extending the developer productivity to a whole new dimension of premium media experience and feature-rich business applications. It comes along with many new feature updates as well as the inclusion of new technologies to improve the standard of the Silverlight applications which are now fine-tuned to produce next generation business and media solutions that is capable to meet the requirements of the advanced web-based app development. The Silverlight 5 is all set to replace the previous fourth version which now includes more than forty new features while also dropping various deprecated elements that was prevalent earlier. It has brought around some major performance enhancements and also included better support for various other tools and technologies. Following are some of the changes that are registered to be available under the Silverlight 5 Beta edition which is scheduled to be launched during the Q1 2011. Silverlight 5 : Premium Media Experiences The media features of Silverlight 5 has seen some major enhancements with a lot of optimizations being made to deliver richer solutions. It's capability has now been extended to make things easier, faster and capable of performing the desired tasks in the most efficient manner. The Silverlight media solutions has already been a part of many companies in the recent days where various on-demand Silverlight services were featured but with the arrival of the next generation premium media solution of Silverlight 5, it is expected to register new heights of success and global user acclamation for using it with many esteemed web-based projects and media solutions. - The most happening element in the new Silverlight 5 will be its support for utilizing the GPU based hardware acceleration which is intended to lower down the CPU load to a significant extent and thereby allowing faster rendering of media contents without consuming much resources. This feature is believed to be particularly helpful for low configured machines to run full HD media content without any lagging caused due to processor load. It will hence be one great feature to revolutionize the new generation high quality media contents to be available within the web in a more efficient manner with its hardware decoded video playback capabilities. - With the inclusion of hardware video decoding to minimize the processor load, the Silverlight 5 also comes with another optimization enhancement to also reduce the power consumption level by making new methods to deal with the power-saver settings. With this optimization in effect, the computer would be automatically allowed to switch to sleep mode while no video playback is in progress and also to prevent any screensavers to popup and cause annoyances during any video playback. There would also be other power saver options which will be made available to best suit the users requirements and purpose. - The Silverlight trickplay feature is another great way to tweak any silverlight powered media content as is used for many video tutorial sites or for dealing with any sort of presentations. This feature enables the user to modify the playback speed to either slowdown or speedup during the playback durations based on the requirements without compromising on the quality of output. Normally such manipulations always makes the content's audio to go off-pitch, but the same will not be the case with TrickPlay and the audio would seamlessly progress with the video without skipping any of its part. - In addition to all of the above, the new Silverlight 5 will be featuring wireless control of all the media contents by making use of remote controllers. With the use of such remote devices, it will be easier to handle the various media playback controls thereby providing more freedom while experiencing the premium media services. Silverlight 5 : Business Application Development The application development standard has been extended with more possibilities by bringing forth new and useful technologies and also reviving the existing methods to work better than what it was used to. From the UI improvements to advanced technical aspects, the Silverlight 5 scores high on all grounds to produce great next generation business delivered applications by putting in more creativity and resourceful touch to all the apps being produced with it. - The WPF feature of Silverlight is made more effective by introducing new standards of Databinding which is intended to improve the productivity standards of the Silverlight application developer. It brings in a lot of convenience in debugging the databinding components or expressions and hence making things work in a flawless manner. Some additional features related to databinding includes that of Ancestor RelativeSource, Implicit DataTemplates and Model View ViewModel (MVVM) support with DataContextChanged event and many other new features relating it. - It now comes with a refined text and printing service which facilitates better clarity of the text rendering and also many positive changes which are being applied to the layout pattern. New supports has been added to include OpenType font, multi-column text, linked-text containers and character leading support to name a few among the available features.This also includes some important printing aspects like that of Postscript Vector Printing API which allows to program our printing tasks in a user defined way and Pivot functionality for visualization concerns of informations. - The Graphics support is the key improvements being incorporated which now enables to utilize three dimensional graphics pattern using GPU acceleration. It can manage to provide some really cool visualizations being curved to provide media contents within the business apps with also the support for full HD contents at 1080p quality. - Silverlight 5 includes the support for 64-bit operating systems and relevant browsers and is also optimized to provide better performance. It can support the background thread for the networking which can reduce the latency of the network to a considerable extent. The Out-of-Browser functionality adds the support for utilizing various libraries and also the Win32 API. It also comes with testing support with VS 2010 which is mostly an automated procedure and has also enabled increased security aspects of all the Silverlight 5 developed applications by using the improved version of group policy support.

    Read the article

  • Megacli is killing me, any help appreciated

    - by Stefan
    I run a server with 2 drives in raid0 configured through BIOS. I just added 2 more drives using hotplug (the server is dell r610 with RHEL 5.4 64bit) and I would like to configure a separate raid0 partition on these drives. I am getting the following error: /opt/MegaRAID/MegaCli/MegaCli64 -CfgLdAdd r0[32:2, 32:3] -a0 The specified physical disk does not have the appropriate attributes to complete the requested command. Exit Code: 0x26 All the parameters are correct and there is just no reason why this command could not work, see this (fujitsu is current raid, seagate is the new one I want to create): /opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL | egrep 'Adapter|Enclosure|Slot|Inquiry' Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: 0 Inquiry Data: FUJITSU MBD2147RC D807D0A4PA101174 Enclosure Device ID: 32 Slot Number: 1 Enclosure position: 0 Inquiry Data: FUJITSU MBD2147RC D807D0A4PA10115T Enclosure Device ID: 32 Slot Number: 2 Enclosure position: 0 Inquiry Data: SEAGATE ST9300603SS FS033SE0TF5K Enclosure Device ID: 32 Slot Number: 3 Enclosure position: 0 Inquiry Data: SEAGATE ST9300603SS FS023SE070FK I also tried to set up the drive as hotspare, also some strange error: /opt/MegaRAID/MegaCli/MegaCli64 -PDHSP -Set -physdrv[32:3] -a0 Adapter: 0: Set Physical Drive at EnclId-32 SlotId-3 as Hot Spare Failed. FW error description: The specified device is in a state that doesn't support the requested command. Exit Code: 0x32 As you can see the disk is in Unconfigured, Good state: Enclosure Device ID: 32 Slot Number: 3 Enclosure position: 0 Device Id: 3 Sequence Number: 1 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SAS Raw Size: 279.396 GB [0x22ecb25c Sectors] Non Coerced Size: 278.896 GB [0x22dcb25c Sectors] Coerced Size: 278.875 GB [0x22dc0000 Sectors] Firmware state: Unconfigured(good), Spun Up SAS Address(0): 0x5000c50005cd20b1 SAS Address(1): 0x0 Connected Port Number: 3(path0) Inquiry Data: SEAGATE ST9300603SS FS023SE070FK FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: Foreign Foreign Secure: Drive is not secured by a foreign lock key Device Speed: Unknown Link Speed: Unknown Media Type: Hard Disk Device Drive Temperature :30C (86.00 F)

    Read the article

  • Ideal Bacula appliance?

    - by Ricket
    I'm an intern at a small company and we (the IT department of two) manage <100 client computers and a handful of servers. Currently we're using a company's appliance to handle backup; it does a small backup every night and a full backup every weekend, and a guy comes on Wednesday to take an offsite backup drive (and gives back last week's drive to swap with it). Lately this system, mainly the appliance, has been having problems, so we are looking for an alternative. I'm researching other companies but also looking into what we might expect from trying to do this ourselves. There will undoubtedly be a large learning curve, but hey, that's what serverfault is for, right? :) So anyway I was looking at Bacula. Feature list sounds great, documentation is plentiful, but it's only software. So my question is, what is the ideal backup server to run the Bacula server software on? And not only the server but other related appliances. Our current backup appliance uses only hard drives, not tape drives. It has several plugged into it at one time, in hotswap bays on the front of the machine. I couldn't help but notice though, it's hardly more than Windows XP with hard drive bays, a PCI eSATA card (which connects to another appliance extension piece with 2 more bays), and their software. Since the company will take back their appliance if/when we cancel with them, where can I go to configure a server with these kinds of things? Maybe I'm being naive, I'm sure Dell (and any other computer company) sells them in the small business section of their website, but I wanted to make sure that there's not some other more recommended place that other companies are getting their hardware from, and that I don't need anything special for Bacula.

    Read the article

  • How to find virtualization performance bottlenecks?

    - by Martin
    We have recently started moving our C++ build server(s) from real machines into VMs. (MS Hyper-V) We have some performance issues that I've currently no idea how to address. We have: Test-Box - this is a piece of desktop workstation hardware my co-worker used to set up the VM before we moved it to the actual server hardware Srv-Box - this is the server hardware Test-Box-Real - This is Windows running directly on the Test-Box HW Test-Box-VM - This is Windows in a Hyper-V VM on the Test-Box HW Srv-Box-Real- This is Server2008R2 running on the Srv-Box HW. Srv-Box-VM- This is Windows running in a Hyper-V VM on the Srv-Box HW, i.e. on Srv-Box-Real. Now, the problem is that we compared Build times between Test-Box-Real and Test-Box-VM and they were basically equal (within about 2%). Then we moved the VM to the Srv-Box machine and what we saw there is that we have a significant performance degradation between Srv-Box-Real and Srv-Box-VM, that is, where we saw no differences on the Test HW we now do see major differences in performance on the actual Server HW. (Builds about ~~ 50% slower inside the VM.) I should add that both the Test-Box and the Srv-Box are only running this one single VM and doing nothing else. I should also note that the "Real" OS is Win2008R2(64bit) and the VM hosted OS is Wind2003R2(32bit). Hardware specs: Srv-Box: Intel XEON E5640 @ 2.67Ghz (This means 8 cores with hyperthreading on the Real system and "only" 4 cores on the VM, since Hyper-V doesn't allow for hyperthreading, but number of cores doesn't seem to explain the problem here.) 16GB RAM (we have 4GB assigned to the VM) Virtual DELL RAID 1 (2x 450GB HUS156045VLS600 Hitachi 15k SAS drives) Test-Box: Intel XEON E31245 @ 3.3GHz 16GB RAM WD VelociRaptor 600GB 10k RPM SATA Note again that I'm only concerned with the differences between Srv-Box-Real and Srv-Box-VM (high) vs. the differences seen btw. Test-Box-Real and Test-Box-VM (low). Why would one machine have parity when comparing VM vs Real performance and the other (server grade HW no less) would have a large disparity? (Both being XEON CPUs ...)

    Read the article

  • iSCSI errors continue after removing inaccessible target portal

    - by Ansgar Wiechers
    By mistake I entered an iSCSI target portal address in the iSCSI Initiator on one of our virtual servers that does not have an address in the network range used for iSCSI. This caused the following errors/warnings to appear in the eventlog: Log Name: System Source: MSiSCSI Event ID: 113 Level: Warning Description: iSCSI discovery via SendTargets failed with error code 0xefff0003 to target portal *192.168.23.42 0003260 Root\ISCSIPRT\0000_0 . Log Name: System Source: iScsiPrt Event ID: 1 Level: Error Description: Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data. Log Name: System Source: iScsiPrt Event ID: 70 Level: Error Description: Error occurred when processing iSCSI logon request. The request was not retried. Error status is given in the dump data. So far that's expected beahvior, so I removed the portal from the iSCSI Initiator as described in MSKB 976072. However, the errors/warnings keep appearing every hour, even though neither iSCSI Initiator GUI nor iscscli show any portals: C:\>iscsicli ListTargetPortals Microsoft iSCSI Initiator Version 6.1 Build 7601 The operation completed successfully. The problem persists after rebooting the server. Uninstalling the Microsoft iSCSI Initiator device via devmgmt.msc as well as changing the Initiator parameters like this: [HKLM\SYSTEM\CurrentControlSet\Control\Class\{4D36E97B-E325-11CE-BFC1-08002BE10318}] "MaxPendingRequests"=dword:00000001 "MaxConnectionRetries"=dword:00000001 "MaxRequestHoldTime"=dword:00000005 didn't help either. Each change was followed by a reboot. Disabling the device does prevent the errors/warnings from re-appearing, of course, but I'd rather not have to resort to this. How can I prevent those errors and warnings from appearing (short of disabling the initiator device or re-installing the server)? What am I missing? Environment: The virtual machine runs on a Hyper-V cluster managed by SCVMM 2012. Hosts and guests run Windows Server 2008 R2 SP1. The physical machines are Dell PowerEdge M710HD blades.

    Read the article

  • Dynamic Grouping and Columns

    - by Tim Dexter
    Some good collaboration between myself and Kan Nishida (Oracle BIP Consulting) over at bipconsulting on a question that came in yesterday to an internal mailing list. Is there a way to allow columns to be place into a template dynamically? This would be similar to the Answers Column selector. A customer has said Crystal can do this and I am trying to see how BI Pub can do the same. Example: Report has Regions as a dimension in a table, they want the user to select a parameter that will insert either Units or Dollars without having to create multiple templates. Now whether Crystal can actually do it or not is another question, can Publisher? Yes we can! Kan took the first stab. His approach, was to allow to swap out columns in a table in the report. Some quick steps: 1. Create a parameter from BIP server UI 2. Declare the parameter in RTF template You can check this post to see how you can declare the parameter from the server. http://bipconsulting.blogspot.com/2010/02/how-to-pass-user-input-values-to-report.html 3. Use the parameter value to condition if a particular column needs to be displayed or not. You can use <?if@column:.....?> syntax for Column level IF condition. The if@column is covered in user documentation. This would allow a developer to create a report with the parameter or multiple parameters to allow the user to pick a column to be included in the report. I took a slightly different tack, with the mention of the column selector in the Answers report I took that to mean that the user wanted to select more of a dimensional column and then have the report recalculate all its totals and subtotals based on that selected column. This is a little bit more involved and involves some smart XSL and XPATH expressions, but still very doable. The user can select a column as a parameter, that is passed to the template rather than the query. The parameter value that is actually passed is the element name that you want to regroup the data by. Inside the template we then reference that parameter value in our for-each-group loop. That's where we need the trixy XSL/XPATH code to get the regrouping to happen. At this juncture, I need to hat tip to Klaus, for his article on dynamic sorting that he wrote back in 2006. I basically took his sorting code and applied it to the for-each loop. You can follow both of Kan's first two steps above i.e. Create a parameter from BIP server UI - this just needs to be based on a 'list' type list of value with name/value pairs e.g. Department/DEPARTMENT_NAME, Job/JOB_TITLE, etc. The user picks the 'friendly' value and the server passes the element name to the template. Declare the parameter in RTF template - been here before lots of times right? <?param@begin:group1;'"DEPARTMENT_NAME"'?> I have used a default value so that I can test the funtionality inside the template builder (notice the single and double quotes.) Next step is to use the template builder to build a re-grouped report layout. It does not matter if its hard coded right now; we will add in the dynamic piece next. Once you have a functioning template that is re-grouping correctly. Open up the for-each-group field and modify it to use the parameter: <?for-each-group:ROW;./*[name(.) = $group1]?> 'group1' is my grouping parameter, declared above. We need the XPATH expression to find the column in the XML structure we want to group that matches the one passed by the parameter. Its essentially looking through the data tree for a match. We can show the actual grouping value in the report output with a similar XPATH expression <?./*[name(.) = $group1]?> In my example, I took things a little further so that I could have a dynamic label for the parameter value. For instance if I am using MANAGER as the parameter I want to show: Manager: Tim Dexter My XML elements are readable e.g. DEPARTMENT_NAME. Its a simple case of replacing the underscore with a space and then 'initcapping' the result: <?xdoxslt:init_cap(translate($group1,'_',' '))?> With this in place, the user can now select a grouping column in the BIP report viewer and the layout will re-group the data and any calculations based on that column. I built a group above report but you could equally build the group left version to truly mimic the Answers column selector. If you are interested you can get an example report, sample data and layout template here. Of course, you can combine Klaus' dynamic sorting, Kan's conditional column approach and this dynamic grouping to build a real kick ass report for users that will keep them happy for hours..

    Read the article

  • Remote Desktop Connection Only Works One Way

    - by advocate
    I can't get my desktop to connect to my laptop through remote desktop connection. Unfortunately I can only get my laptop to connect to my desktop (quite useless). Desktop: Windows 7 Ultimate 64 Bit SP1 Windows firewall is off for all 3 profiles (domain / private / public) Remote desktop connection is installed and set to allow all connections Under running services is: Running Remote Desktop Configuration Running Remote Desktop Services Running Remote Desktop Services UserMode Port Redirector Running Remote Procedure Call (RPC) Stopped Remote Access Auto Connection Manager Stopped Remote Access Connection Manager Stopped Remote Procedure Call (RPC) Locator Stopped Remote Registry Stopped Routing and Remote Access Stopped Windows Remote Management (WS-Management) Laptop: Windows 7 Home Premium 64 Bit SP1 Windows firewall is off for all3 profiles (domain / private / public) Remote desktop connection is installed and set to 'Allow Remote Assistance connections to this computer' Under running services is: Running Remote Procedure Call (RPC) Stopped Remote Access Auto Connection Manager Stopped Remote Access Connection Manager Stopped Remote Desktop Configuration Stopped Remote Desktop Services Stopped Remote Procedure Call (RPC) Locator Stopped Remote Registry Stopped Routing and Remote Access Stopped Windows Remote Management (WS-Management) It should be noted that the Laptop that I'm trying to connect to is an Alienware and might be running some wonky Dell settings. Also, the settings are slightly different for remote desktop connection as it's a Home edition of Windows and not Ultimate like my desktop. Finally, both computers are on the same Homegroup so that RDC can be accessed by one click through the network section of Windows. They're also on the same workgroup, MSHOME, just to see if that helps.

    Read the article

  • Windows Server 2008 Stops Responding (Hyper-V Role Enabled)

    - by blackf0rk
    The machine is a brand new Dell Precision m6500, Core i5, 8GB RAM. Windows Server 2008 R2 (fully patched) with Hyper-V Role Enabled. Virtualization options in the BIOS are ON, SpeedStep is OFF, couldn't find C1E option in the BIOS to turn it off (I also got the impression that SpeedStep is C1E, but the Intel Product site lists them as separate "features." shrug) The server stops responding without any apparent reason. I've tried testing in multiple scenarios, all of which result in a crash at seemingly random times: With the Server sitting idle, no apps running. Server sitting idle with a Virtual Machine running. Using a BurnInTest application There's no blue screen. It doesn't restart. The screen just sits there. The keyboard backlight still responds and comes on with input, but nothing on the screen changes. There are no errors in the error log. I have to hold down the power button to turn it off. Doing memory tests on bootup results in no errors with the memory. I have a second identical system and the same thing happens there too. I've dual-booted into Windows 7 Profession x64 on this system with no problems. Further testing has shown that the issue is definitely related to Windows Server 2008 R2 and Hyper-V as it appears the crashing does not happen when the services are not running. I've installed all hotfixes relating to this issue (that I could find): 975530, 979444, 979491, 976427 System is still crashing without response.

    Read the article

  • Understanding Linux SCSI queue depths

    - by Troels Arvin
    I'm experimenting with the effects of different SCSI queue depth values on a Dell server running CentOS Linux 5.4 (x86_64). The server has two QLogic QLE2560 FC HBAs connected via multipathing to a storage system. The storage system has allocated two LUNs to the server, each connected through four paths in an active-active-active-active round-robin configuration. All in all, the two LUNs exist as eight /dev/sdX devices, represented by two devices in /dev/mpath. I currently adjust the queue depth values in /etc/modprobe.conf and check the result (after rebooting) by looking in the seventh column of /proc/scsi/sg/devices. Two questions related to that: Is there a way to adjust queue depths without rebooting or unloading the qla2xxx kernel module? E.g., can I echo a new queue depth value into some /proc or /sys-like file to update the queue depth? If I set the queue depth to 128, is that 128 in total for all devices handled by the qla2xxx module?, or 128 for each HBA? (256 in total), or 128 for each of the eight /dev/sdX devices (1024 in toal)?, or 128 for each of the two /dev/mpath/... devices (256 in total)? This is important for me to know so that my server doesn't flood the storage system, affecting other servers connected to it.

    Read the article

  • System Information (msinfo32.exe) Can't Collect Information

    - by ptanne
    I have Windows XP Pro, service pack 1, IE 6 and 32GB of free space, 75GB total. I have had nothing but trouble after trying to install service pack 2 even though I used System Restore. The installation was incomplete and my computer has never been the same. I attempted to install sp2 four or five times and sp3 once, always with the same result. I've tried reinstalling XP Pro but that didn't fix the problem. My XP Pro disk now has a scratch on it and refuses to work. Dell would not replace it stating that my computer was out of warranty. I'm currently trying Reimage which is supposed to return a computer to the original configuration and replace missing or damaged files. Believe it or not, Ripley, it stops in the middle of the operation and, so far, the Reimage techs haven't been able to figure out why. Of the many problems that I still have is that System Information can't collect information. The Help and Support sections that display system info also don't work. Is there some way that I can fix this? I can't afford to throw my computer away, yet. Thank you for listening, Pam Galvin

    Read the article

  • IPMI not fucntioning with Network Bonding

    - by muhammed sameer
    Hey, I am having problems with running IPMI on my servers that have network bonding enabled. Platform: CentOS release 5.3 (Final) Kernel: 2.6.18-92.el5 64bit Dell PowerEdge 1950 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet I have bonded the interface eth0 and eth1 as active passive, with eth0 as the active interface, below is conf description from /proc Bonding Mode: fault-tolerance (active-backup) Primary Slave: eth0 Currently Active Slave: eth0 MII Status: up MII Polling Interval (ms): 30 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cd Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cf My IPMI device is as follows IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x10 NV Storage Device: Not Present Base Address: 0x0000000000000CA8 (I/O) Register Spacing: 32-bit Boundaries I Have used openIPMI as well as freeipmi both to control the chassis via the IPMI card, but on servers which have bonding enabled, the command times out, below is the full run of the command with debug info. ipmi_lan_send_cmd:opened=[0], open=[4482848] IPMI LAN host 70.87.28.115 port 623 Sending IPMI/RMCP presence ping packet ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed Error: Unable to establish LAN session Failed to open LAN interface Unable to get Chassis Power Status On the other hand I configured IPMI on a box with the same specs as mentioned above without bonding and IPMI works perfectly. Has anyone faced this problem with IPMI + Bonding ? I would be thankful is someone helps circumvent this issue. Muhammed Sameer

    Read the article

  • ZFS + FreeBSD + virtualbox

    - by John
    Hi, I'm configuring a FreeBSD server hosting virtualbox serving half dozen mission critical busy mail servers. I just learned ZFS, I'm quite attracted, but have a few questions: what is the CPU overhead of ZFS? I googled and found little (or no) benchmark for that. from what I learned, when ZFS updates files, it keeps the old file as snapshot, and write the updated part for the new version. However that would mean for each snapshot it keeps that require significant storage overhead. How much is this storage overhead? For example, suppose I have 2TB usable space, how much space can actually be used for the latest version of files one year later? is FreeBSD with ZFS hosting virtualbox serving half dozen busy guest mission critical mail servers a reasonable combination? Anything particular to be careful with? And can I still choose ZFS for the guest OSs? This is because I may build another identical such box for redundancy, and will need to do some mirroring between each pair of the guest systems across the boxes. I'm trying to configure a Dell R710 for this. From what I learned, I shouldn't choose any RAID at all, is that true? In that case, are the drives still arrive hot swappable? this may sounds a bit pathetic, but since I have no experience with ZFS at all, and this is a mission critical server, so just ask just in case: I'm choosing twin Intel L5630 processors, and 6 x 600GB 15K RPM Serial-Attach SCSI drives. If I need more space in the future, I would just hot swap some drivers with larger capacity to expand the storage. There is no problem with these, right?

    Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >