Search Results

Search found 34649 results on 1386 pages for 'direct access'.

Page 114/1386 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• Allow access to printer between interfaces on Cisco ASA5510

  - by Jonas Stensved

  I have a Cisco ASA5510 where we have to separate networks on two separate interfaces. The networks have and should have nothing to do with each other except that network B needs to access a printer on network A. Network A: 192.168.137.0/24 Printer: 192.168.137.20 Network B: 192.168.0.0/24 I've added an incoming rule from Network A to the Printer IP in the ASDM interface but clients can't print. Our previous router was configured to let traffic through so the clients on Network B is already configured so it think it should work if the traffic is allowed. How do I let clients on Network B communicate with the printer?

  Read the article

• Ubuntu cannot access internet, LAN is fine

  - by Kevin Southworth

  I have an Ubuntu 8.04 LTS server that is directly connected to our Comcast Business Gateway modem and I have configured it with 1 of our 5 allotted Static IPs. My other machines on our LAN can connect to this server (via ssh, web, ping, etc.) but I cannot access this server from outside our network, and this machine cannot get out to the internet either (ping google.com fails with unknown host). Here is my /etc/networking/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.162.54.19 netmask 255.255.255.248 broadcast 173.162.54.23 gateway 173.162.54.22 and my /etc/resolv.conf: nameserver 68.87.77.130 nameserver 68.87.72.130 output from sudo route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 173.162.54.16 0.0.0.0 255.255.255.248 U 0 0 0 eth0 0.0.0.0 173.162.54.22 0.0.0.0 UG 100 0 0 eth0 I have a Windows 2008 machine with an almost identical Static IP, static DNS setup and it works correctly, can access it within the LAN and also from public internet, the Windows machine and the Ubuntu machine are both directly connected to the Comcast Business Gateway. I have tried rebooting Ubuntu, rebooting my Comcast modem, but nothing seems to make it work. I'm an Ubuntu noob, is there some other config I need to apply to make this work? UPDATE: Yes I am able to ping my default gateway 173.162.54.22 output of iptables --list -n: Chain INPUT (policy DROP) target prot opt source destination ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination ufw-before-forward all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-forward all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ufw-before-output all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-output all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-forward (1 references) target prot opt source destination LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK FORWARD]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-input (1 references) target prot opt source destination RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:137 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:138 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK INPUT]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-forward (1 references) target prot opt source destination ufw-user-forward all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED DROP all -- 0.0.0.0/0 0.0.0.0/0 ctstate INVALID ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:67 dpt:68 ufw-not-local all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 224.0.0.0/4 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 224.0.0.0/4 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-output (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ufw-user-output all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-not-local (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type MULTICAST RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type BROADCAST LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK NOT-TO-ME]: ' DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-forward (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0

  Read the article

• access netatalk share on osx permission issue

  - by Fresheyeball

  I have two users in ubuntu. My first was me and I am the owner of the folder in question. The second is my wife. Netatalk is running and we can both see the folder on the network. However I can access it but she cannot. She gets an error in osx "... you don't have permission to see its contents". I have use chmod 777 on the folder but it made no difference. Any ideas? UPDATE The directory in question is a mounted harddrive at /media/ourPhotos

  Read the article

• Enabling SFTP Access within PLESK

  - by spelley

  I have a client who wants to ensure his upload is secure, so we are trying to enable SFTP for him on our Linux PLESK server. I have enabled SSH access to bin/bash for FTP accounts, and created a new user. When I attempt to SFTP using either the IP address or the domain name, this is the error FileZilla is giving me: Error: Authentication failed. Error: Critical error Error: Could not connect to server Here is some basic information regarding the server: Operating system Linux 2.6.24.5-20080421a Plesk Control Panel version psa v8.6.0_build86080930.03 os_CentOS 5 I had read in some places that I should reboot the SSH Service in Server - Services, however, there is no SSH Service within the list. I'm not really a server guy so it's quite possible I'm missing something obvious. Thanks for any help that you guys can provide!

  Read the article

• Apache - access two or more virtual hosts from outside

  - by André Alçada Padez

  I have an apache2 server running on my ubuntu system. I have two sites enabled: default (ServerName localhost) site2 (ServerName jslib) I run a windows Virtual Box Machine, to be able to test my stuff in IE. If i type the ubuntu's IP in the addressbar i get the localhost. I was wondering how can i access both (or more as i need it) from other machines. Thanks update I have configured the windows' hosts file like so: 10.0.2.2 localhost 10.0.2.2 jslib It works, but i am really looking for something that i can configure on the server side, and then just change the value of the URL, am i crazy?

  Read the article

• How do I access my public DNS on Amazon's EC2

  - by Spencer Carnage

  I'm working with Amazon's EC2 for the first time. I went through all of the steps at http://docs.amazonwebservices.com/AWSEC2/latest/GettingStartedGuide/ and now I'm trying to access the public DNS through a web browser. I get nothing. I don't even know if I'm supposed to get anything, really. I just want to see something that indicates that my instance is accessible from the web for development's sake. I'm completely new at this and I can't find a simple answer to this anywhere to save my life. Any help would be MUCH appreciated. Thanks!

  Read the article

• Tomcat access logs - are failed requests included?

  - by Maxim Eliseev

  We have a RESTful web service (Java, hosted in Tomcat on Ubuntu on Amazon EC2). From time to time it fails (not every week). When it fails, Java CPU consumption goes to 100% and it takes all available memory. It does not finish by itself. I have to restart the server. There is nothing suspicious in Tomcat access logs. I guess one of our users could submit a very "heavy" request which brought the server down. Is it possible this request is not in Tomcat logs since it never finished?

  Read the article

• how to manage credentials/access to multiple ssh servers

  - by geoaxis

  I would like to make a script which can maintain multiple servers via SSH. I want to control the authentication/authorization in such a manner that authentication is done by gateway and any other access is routed through this ssh server to internal services without any further authentication/authorization requirements. So if a user A can log into server_1 for example. He can then ssh to server_2 without any other authentication and do what ever he is allowed to do on server_2 (like shut down mysql, upgrade it and restart it. This could be done via some remote shell script). The problem that I am trying to solve is to come up with a deployment script for a JavaEE system which involves databases and tomcat instances. They need to be shutdown and re-spawned. The requirement is to have a deployment script which has minimal human interaction as possible for both developers and operation.

  Read the article

• Access Denied Error in PagesListCPVEventReceiver post SharePoint SP2 upgrade

  - by Jeff

  I am seeing the following errors from one of the SharePoint Web Front Ends after the SP2 upgrade. Has anyone else seen this error or a solution? Event Type: Error Event Source: Windows SharePoint Services 3 Event Category: General Event ID: 6875 Date: 2009-10-27 Time: 13:09:57 User: N/A Computer: XXXXXXX Description: Error loading and running event receiver Microsoft.SharePoint.Publishing.PagesListCPVEventReceiver in Microsoft.SharePoint.Publishing, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c. Additional information is below. : Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• VM clients can not access WAN

  - by Saariko

  I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

  Read the article

• installing packages without sudo access

  - by whitman

  Is there an easy way to install packages with a large dependency tree, provided that you don't have superuser access? For instance, say I wanted to install firefox. Firefox has a ton of dependencies, each of which have their own dependencies, etc. Installing these the "./configure; make; make install" way would take forever. Is there an option I can give apt-get to make it install in a personal directory? Or is there a way to hack it to do all the heavy lifting for me?

  Read the article

• Separating my VPN connection from my internet access

  - by Christi

  Background: Home PC is Windows XP and using Cisco VPN client; home internet connection is fast (20MB) office VPN router is Cisco RV110W; work internet connection is slow (1.5MB) With VPN connected, my home PC internet surfing is very slow. I looked this up in Google and found talk about splitting, tunneling, routing tables, etc., but I'm not sure what/how to do it. Basically, I would like a persistent VPN connection with the office resources, and at the same time, utilize my home high speed internet connection to access the internet. Can someone help me the steps as how-to?

  Read the article

• anonymous access to ftpd

  - by gcb

  I need FTP on my local LAN so my scanner can send me scans. I am on Debian sid. I installed ftpd and created the user anonymous. I removed anonymous from /etc/ftpusers When I try to login as anonymous it says: login failed. I can't seem to find any log file. I'm using FTP server (Version 6.4/OpenBSD/Linux-ftpd-0.17) update:I needed that so my printer had one place to store my scanned documents on the LAN. solved that buying a dedicated USB pen drive (thankfully I bought a printer one with plenty of options) but in the past this was a very simple task. Install ftpd, specify the directory for anonymous access, and be done with it. now every ftp daemon has several layers of security and chroot in it's core... this is just crazy when all you need a place for a printer to dump files in a secured network.

  Read the article

• when connected to vpn, can't access certain things

  - by shsteimer

  my companies vpn is not a standard windows vpn. It uses Juniper Networks and it intalls locally something called "Host Checker" prior to allowing me to connect. I have noticed 2 things that I can't access while on vpn. etrade.com - no idea why this specific website, but I can't get to it, maybe https? use of my magik jack - I'm assuming this is some sort of a port conflict issue. if im on a call when i connect, i lose all reception. if i try to make a call after conected, ic an't even get it to dial. Can anyone tell me how I would even begin to debug this. I expect if I call the help desk they won't be much help, but if I can tell them the specific problems of conflicts, maybe I have a chance of them working with me to get it working.

  Read the article

• Can't access Terminal anymore, only shows a cursor

  - by user138304

  I run OS X. Following these directions (Installing MySQL on Mac OS X) I added a file to /usr and the contents were PATH=/usr/local/mysql/bin:$PATH Actually I was trying to get the mysql command to work now I cannot access terminal. All I get is a cursor but no command line. I also cannot find the file I created in the Finder. I used command shift G to find the folder /usr and the file is not there. Edit: I Solved the problem by restarting my computer. I am really not sure what the problem was. I got the idea because Could not open a new pseudo-tty. appeared in my terminal after following slhck directions to remove my .profile file. I then searched google and found this; http://blogs.oreilly.com/digitalmedia/2008/03/fixing-terminal-tty-errors.html. Thanks

  Read the article

• Access or import an Outlook 2003 .pst file without Outlook

  - by Nobler

  I have a 450 meg .pst file (MS Outlook 2003 backup file) saved from a PC before it crashed. I would like to break it up into its components i.e. Save attachments to folders on my PC Paste text-emails into a word processor, etc. But I don't want to buy MS Office Professional 2003 or later solely for importing the .pst into MS Outlook 2003+. Outlook Express cannot import .pst files, only Outlook “proper” can. Is there some free email client out there, e.g. Thunderbird, that can import .pst files? Or is there some other way to access the 450meg file?

  Read the article

• Windows remote shutdown: access denied

  - by gregseth

  I have 3 "client" computers, on which the mentioned user is administrator: CPU1: Win Vista 32-bit -- User: Domain\User1 -- IP: 192.168.42.1 CPU2: Win 7 64-bit -- User: localhost\User2 -- IP: 192.168.42.2 CPU3: Win 7 64-bit -- User: Domain\User3 -- IP: 192.168.42.3 And a "target" computer (the one that I want to shutdown from the three others): TGT: Win 7 64-bit -- User: localhost\User4 -- IP: 192.168.42.21 I'm trying to shutdown TGT with the following command: shutdown /s /m \\192.168.42.21 It's working from CPU1 (meaning TGT shuts down), but from CPU2 and CPU3 I get the following message: Access denied. (5) What am I to understand? What should I do to get it working form all of my computers.

  Read the article

• Restrict Applications access to Device

  - by Dboy1612

  I have a PC that has the ability to handle running multiple game clients at once (specifically Tera Online). What I'd like to do is assign and/or restrict each clients access to a device (Gamepad) so that the actions from each device only effects the client I specify. After doing some research with Python's PyGame, I can see that a Gamepad essentially works like a Keyboard does by sending global key events to the entire system, and then the application reading those events. Question is, how can I make it not global? ONly have one application read one controller? Any help is appreciated!

  Read the article

• Access requires a username and password

  - by articles

  Access requires a username and password Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection) I am getting this above message. I have hosted a website in godaddy hosting space. But when i run it.. it is prompt for User name and Password (above message). I am not using windows authentications in my website.... Moreover, i have test my website code on testing server....it never prompts for this message unless Integrated Windows Authentication is checked. Any help is appreciated.. Thanks

  Read the article

• Root access amazon ec2

  - by mazzzzz

  Hey guys, I am very new to linux, and amazon-ec2. I wanted to put a quick server. For some reason, when I sign in with my key pair, it prompts me for a username, I input ec2-user, and I'm in. The problem is that I don't have root access (and can't find the root password). I need to install screen to run the server in the background, and also create a new user, that doesn't have root, to run the server. Neither of which I can do without root.. Any help? Edit: I am using Basic 32-bit Amazon Linux AMI 2010.11.1 Beta as the 'AMI'. Thanks, Max

  Read the article

• SBS 2008 File access restrictions after 5:30PM

  - by Moif Murphy

  Hi there, SBS 2008, I have an issue whereby a user can't access a file after 5:30PM. They get the message: "cannot be accessed. The file may be corrupted, located on a server that is not responding, or read only I've checked the logon hours on the AD User account in question and there's no restrictions there. I have noticed that the account in question does not appear in the SBS Console, only in ADUC which means the account wasn't added using the wizard. It's a long shot but would that make a difference? Other than that I'm pretty stumped, any suggestions welcomed. Thanks

  Read the article

• MySQL ERROR 1045 Access Denied

  - by winarm

  Hello- I recently installed MySQL on Fedora13. Now, when I try to create a database, it denies me access. I tried resetting the password and it does not recognize my system root. I tried resetting password with an init-file containing: UPDATE mysql.user SET Password=PASSWORD('MyNewPass') WHERE User='root'; FLUSH PRIVILEGES; I tried uninstall and then reinstall and it is still not working. I am new to Linux and not comfortable with the filesystem. Talk to me like I'm four. Thank you, kindly.

  Read the article

• Access RAID configuration in x3550M2

  - by Mike B

  I'm trying to configure RAID in a IBM x3550 M2 server. I can't find any messages on boot about any hotkey to access the configuration utility. I wasn't able either in BIOS. The card is a on board LSI 1068e. I can't find the original CD's shipped with the server, but I downloaded Server Guide 9.21 from IBM web. Booted with that, and only getting stuck at "Windows loading"p. Tried with a 8.? version from a x3550 (M1), but it was less useful. Although I do not consider myself an expert, I'm starting to feel like a newbie luser. Any help?

  Read the article

• Internet wireless connected with limited access, windows vista

  - by Wawa wiya

  Hello I had some malware in my computer so I did a bit of manual work to remove it including resetting TCP/IP. Now the malware is gone. I can see my home wireless network and I can get connected to it but when connected I get the Internet wireless connected with limited access message. When I go to the IE I cannot browse. When I tried to ping 192.168.1.1 I got an Error Code 1231 Unconnected Network Problem. I have deactivated my Windows firewall as I thought it could be hyperactive security. Still no luck. I have Norton but it is not active, I have also Avast and AVG installed but they are not active. Any ideas?

  Read the article

• Cannot access shares via \\servername but \\ip works

  - by Jeff

  To set up the scenario: One of our techs set one of the domain controllers to use Microsoft time. The time IS correct (including Time Zone) and DOES match the other domain controller's time; it was previously incorrect, however. Since the change, no users can connect via \\servername\share or \\servername.domainname.com but \\ip\share works fine. I cannot even access it from the other domain controller with which I know both have the same time. The servername DOES resolve to the correct IP address. Also, strangely enough, \\domainname.com works as well which resolves to the same server. Finally Everything that I have tried does resolve to the same, correct IP address. The error is: login failure: The target account name is incorrect. I believe it is time related but since the times are correct and match I'm not sure. Anyone know what might cause this?

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >