Search Results

Search found 4893 results on 196 pages for 'expect'.

Page 114/196 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

  • Comparison of Extreme Programming (XP) to Traditional Programming Methodologies

    The comparison of extreme programming (XP) to traditional programming methodologies can find similarities between the historic biblical battle between David and Goliath. Goliath of Gath is a Philistine warrior renowned for his size, strength and battle tested skills. Much like Goliath, traditional methodologies are known to be cumbersome due to large amounts of documentation, and time consuming do to the time needed to gather all the information. However, traditional methodologies have been widely accepted by the software development community for years because of its attention to detail regarding project development and maintenance. David is a male Israelite teenager, who was small, fearless, and untrained in any type of formal combat. In a similar fashion, extreme programming focuses more on code over documentation so that time is spent on developing the project and not on cumbersome documentation of a project. Typically, project managers and developers are fearless when they start this type of project because they usually start with little to no documentation, and they expect to be given changes to be implemented at the start of every new project iteration. Because of the lack of need or desire for documentation in extreme programming projects they appear to act as if there is no formal process involved in developing an extreme programming project.  This is a misnomer, because of the consistent development iterations and interaction with clients and users the quickly takes form because each iteration allows the project to be refined as the customer needs and desires change. Ravikant Agarwal and David Umphress documented a new approach to extreme programming called personal extreme programming (PXP) at the ACM Southeast Regional Conference in 2008. PXP is the application of extreme programming core concepts in a single developer team environment.  PXP focuses on how to adjust the main concepts and practices of extreme programming that is typically centered in a group environment and how they can be altered to be beneficial for a single developer environment. Suzanne Smith and Sara Stoecklin are both advocates of extreme programming according to the Journal of Computing Sciences in Colleges and in fact they feel that it should receive more attention in introductory programming classes to allow students to better understand the software development process. Reasons why extreme programming is a good thing: Developers get to do more of what they love, Develop. Traditional software development methodologies tend to  add additional demands on a project by requiring all requirements and project specifications to be fully defined prior to the start of the implementation phase of a project. A standard 40 hour work week. With limiting the work week to only 40 hours prevents developers from getting burned out on projects.

    Read the article

  • Ed Burns' Servlet 4/HTTP 2 Session at JavaOne

    - by Yolande Poirier
    By Guest Blogger Reza Rahman For the Java EE track at JavaOne 2014 we are highlighting some key sessions and speakers to better inform you of what you can expect, right up until the start of the conference. To this end we recently interviewed Ed Burns. Ed is a veteran of Sun and now Oracle. He has been and is instrumental in pushing the JSF ecosystem forward as specification lead. Besides his specification lead work Ed is well regarded as an author and speaker on his own right. In addition to carrying the JSF torch Ed will be co-leading the key Servlet 4 specification for Java EE 8, along with Servlet specification guru Shing Wai Chan. The primary goal of Servlet 4 is to enable the fundamentally important changes in HTTP 2 for the entire server-side Java ecosystem. We wanted to talk to Ed about his Servlet 4 session at JavaOne 2014 and HTTP 2 generally: The details for the Servlet 4 session can be found here. Ed has several other key sessions on the track that we hope to talk to him about separately in the near future: What’s Next for JSF?: In this key session, Ed will be sharing the next steps for the continued evolution of the JSF specification in Java EE 8. Where’s My UI? The 2014 JavaOne Web App UI Smackdown: The UI space for web applications, especially in the Java ecosystem continues to be as hotly contested as ever. This is especially true with the (re)introduction of JavaScript based rich client frameworks like AngularJS. This lively panel brings together experts representing the diverse schools of thought for web UIs. Ed will be representing JSF of course. Neal Ford will moderate the panel as an independent and hopefully reasonably neutral party. Adopt-a-JSR for Java EE 7 and Java EE 8: Adopt-a-JSR has been a reasonable success for Java EE 7. With Java EE 8 we are planning to strengthen it far more as away of getting grassroots level participation in the specification efforts. This session will introduce Adopt-a-JSR, share how it worked for Java EE 7 and what we plan to do with it in Java EE 8. Ed will be sharing his perspectives on Adopt-a-JSR for both Java EE 7 and Java EE 8. Besides Ed's sessions, we have a very strong program for the Java EE track and JavaOne overall - just explore the content catalog. If you can't make it, you can be assured that we will make key content available after the conference just as we have always done.

    Read the article

  • How can I fix these errors with Panda3D's sample projects?

    - by lhk
    I just installed the latest Panda3D packages on a Mint 12 32-bit virtual machine. Then I downloaded and configured Eclipse and tried to run the Asteroids sample project. The window is created properly. But after rendering the scence once the game freezes. This happens with the other sample apps, too. Here's the error log: DirectStart: Starting the game. Known pipe types: glxGraphicsPipe (all display modules loaded.) :display:gsg:glgsg(warning): Occlusion queries advertised as supported by OpenGL runtime, but could not get pointers to extension functions. OpenGL Warning: glXChooseFBConfig returning NULL, due to attrib=0x6, next=0xffffffff :display:glxdisplay(warning): No suitable FBConfig contexts available; using XVisual only. depth_bits=16 color_bits=24 alpha_bits=8 stencil_bits=8 accum_bits=64 back_buffers=1 stereo=1 force_hardware=1 AL lib: pulseaudio.c:331: PulseAudio returned minreq > tlength/2; expect break up :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant :display:gsg:glgsg(error): at 5703 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4654 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4654 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant :display:gsg:glgsg(error): at 5703 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 3057 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 3057 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant OpenGL Warning: No pincher, please call crStateSetCurrentPointers() in your SPU :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant :display:gsg:glgsg(error): at 5703 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 5703 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 3661 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 3661 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant :display:gsg:glgsg(error): at 5703 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display(error): Deactivating glxGraphicsStateGuardian. What can I do to fix the problem ?

    Read the article

  • SSAS Tabular Workshop online and other upcoming dates (and updates!) #ssas #tabular

    - by Marco Russo (SQLBI)
    After many conferences and travels, this summer I had some time to write and prepare new sessions for the next wave of conferences. In reality I am just doing that, even if I already restarted traveling for consulting and training. So expect new content about DAX and Tabular coming in the next months! Starting to see real customer adopting Tabular is showing many new challenges and there is still a lot to learn and to create. If you still didn’t started working on Tabular, well, you should. As I always say, as a BI developer you should be able to choose between Tabular and Multidimensional, and in order to do that you should know both of them! One thing that I don’t like very much about marketing is that “Tabular is simpler”, because it’s often translated in “Tabular is for simple projects” when this last statement is not true. Actually, I see a lot of good reasons to adopt Tabular in complex data models, especially in non-traditional scenarios. I know, this is because I love to understand what are the actual limits of a technology, and I’m learning that there is simple a lot of space of improvement also for Tabular. It’s already fast, but it could be faster! How can you start? Well, first of all, by reading our book. Then, by attending to our SSAS Tabular workshop. There is an online edition of the workshop on September 3-4, 2012 (hurry up if you want to register), and there are already several dates planned for the next months (and others will be added soon!). And, of course, by installing SQL Server 2012 and trying to create models over your databases. If you are too lazy, just start with PowerPivot. As soon as you start working with Tabular or PowerPivot, you will see that there is one important skill you need: learning DAX. In the next few days I should publish an article that I’m finishing these days about best practices using SUMMARIZE and ADDCOLUMNS. If only someone published this article one year ago, I would have saved many hours of my life. But, you know, flight manuals are written in blood… and someone has to write! Stay tuned.

    Read the article

  • How to Use Your Android Phone as a Modem; No Rooting Required

    - by Jason Fitzpatrick
    If your cellular provider’s mobile hotspot/tethering plans are too pricey, skip them and tether your phone to your computer without inflating your monthly bill. Read on to see how you can score free mobile internet. We recently received a letter from a How-To Geek reader, requesting help linking their Android phone to their laptop to avoid the highway robbery their cellular provider was insisting upon: Dear How-To Geek, I recently found out that my cellphone company charges $30 a month to use your smartphone as a data modem. That’s an outrageous price when I already pay an extra $15 a month charge just because they insist that because I have a smartphone I need a data plan because I’ll be using so much more data than other users. They expect me to pay what amounts to a $45 a month premium just to do some occasional surfing and email checking from the comfort of my laptop instead of the much smaller smartphone screen! Surely there is a work around? I’m running Windows 7 on my laptop and I have an Android phone running Android OS 2.2. Help! Sincerely, No Double Dipping! Well Double Dipping, this is a sentiment we can strongly related to as many of us on staff are in a similar situation. It’s absurd that so many companies charge you to use the data connection on the phone you’re already paying for. There is no difference in bandwidth usage if you stream Pandora to your phone or to your laptop, for example. Fortunately we have a solution for you. It’s not free-as-in-beer but it only costs $16 which, over the first year of use alone, will save you $344. Let’s get started! Latest Features How-To Geek ETC What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Make Efficient Use of Tab Bar Space by Customizing Tab Width in Firefox See the Geeky Work Done Behind the Scenes to Add Sounds to Movies [Video] Use a Crayon to Enhance Engraved Lettering on Electronics Adult Swim Brings Their Programming Lineup to iOS Devices Feel the Chill of the South Atlantic with the Antarctica Theme for Windows 7 Seas0nPass Now Offers Untethered Apple TV Jailbreaking

    Read the article

  • How should I pitch moving to an agile/iterative development cycle with mandated 3-week deployments?

    - by Wayne M
    I'm part of a small team of four, and I'm the unofficial team lead (I'm lead in all but title, basically). We've largely been a "cowboy" environment, with no architecture or structure and everyone doing their own thing. Previously, our production deployments would be every few months without being on a set schedule, as things were added/removed to the task list of each developer. Recently, our CIO (semi-technical but not really a programmer) decided we will do deployments every three weeks; because of this I instantly thought that adopting an iterative development process (not necessarily full-blown Agile/XP, which would be a huge thing to convince everyone else to do) would go a long way towards helping manage expectations properly so there isn't this far-fetched idea that any new feature will be done in three weeks. IMO the biggest hurdle is that we don't have ANY kind of development approach in place right now (among other things like no CI or automated tests whatsoever). We don't even use Waterfall, we use "Tell Developer X to do a task, expect him to do everything and get it done". Are there any pointers that would help me start to ease us towards an iterative approach and A) Get the other developers on board with it and B) Get management to understand how iterative works? So far my idea involves trying to set up a CI server and get our build process automated (it takes about 10-20 minutes right now to simply build the application to put it on our development server), since pushing tests and/or TDD will be met with a LOT of resistance at this point, and constantly force us to break larger projects into smaller chunks that could be done iteratively in a three-week cycle; my only concern is that, unless I'm misunderstanding, an agile/iterative process may or may not release the software (depending on the project scope you might have "working" software after three weeks, but there isn't enough of it that works to let users make use of it), while I think the expectation here from management is that there will always be something "ready to go" in three weeks, and that disconnect could cause problems. On that note, is there any literature or references that explains the agile/iterative approach from a business standpoint? Everything I've seen only focuses on the developers, how to do it, but nothing seems to describe it from the perspective of actually getting the buy-in from the businesspeople.

    Read the article

  • OpenWorld Day 1

    - by Antony Reynolds
    A Day in the Life of an OpenWorld Attendee Part I Lots of people are blogging insightfully about OpenWorld so I thought I would provide some non-insightful remarks to buck the trend! With 50,000 attendees I didn’t expect to bump into too many people I knew, boy was I wrong!  I walked into the registration area and immediately was hailed by a couple of customers I had worked with a few months ago.  Moving to the employee registration area in a different hall I bumped into a colleague from the UK who was also registering.  As soon as I got my badge I bumped into a friend from Ireland!  So maybe OpenWorld isn’t so big after all! First port of call was Larrys Keynote.  As always Larry was provocative and thought provoking.  His key points were announcing the Oracle cloud offering in IaaS, PaaS and SaaS, pointing out that Fusion Apps are cloud enabled and finally announcing the 12c Database, making a big play of its new multi-tenancy features.  His contention was that multi-tenancy will simplify cloud development and provide better security by providing DB level isolation for applications and customers. Next day, Monday, was my first full day at OpenWorld.  The first session I attended was on monitoring of OSB, very interesting presentation on the benefits achieved by an Illinois area telco – US Cellular.  Great discussion of why they bought the SOA Management Packs and the benefits they are already seeing from their investment in terms of improved provisioning and time to market, as well as better performance insight and assistance with capacity planning. Craig Blitz provided a nice walkthrough of where Coherence has been and where it is going. Last night I attended the BOF on Managed File Transfer where Dave Berry replayed Oracles thoughts on providing dedicated Managed File Transfer as part of the 12c SOA release.  Dave laid out the perceived requirements and solicited feedback from the audience on what if anything was missing.  He also demoed an early version of the functionality that would simplify setting up MFT in SOA Suite and make tracking activity much easier. So much for Day 1.  I also ran into scores of old friends and colleagues and had a pleasant dinner with my friend from Ireland where I caught up on the latest news from Oracle UK.  Not bad for Day 1!

    Read the article

  • SSAS: Utility to check you have the correct data types and sizes in your cube definition

    - by DrJohn
    This blog describes a tool I developed which allows you to compare the data types and data sizes found in the cube’s data source view with the data types/sizes of the corresponding dimensional attribute.  Why is this important?  Well when creating named queries in a cube’s data source view, it is often necessary to use the SQL CAST or CONVERT operation to change the data type to something more appropriate for SSAS.  This is particularly important when your cube is based on an Oracle data source or using custom SQL queries rather than views in the relational database.   The problem with BIDS is that if you change the underlying SQL query, then the size of the data type in the dimension does not update automatically.  This then causes problems during deployment whereby processing the dimension fails because the data in the relational database is wider than that allowed by the dimensional attribute. In particular, if you use some string manipulation functions provided by SQL Server or Oracle in your queries, you may find that the 10 character string you expect suddenly turns into an 8,000 character monster.  For example, the SQL Server function REPLACE returns column with a width of 8,000 characters.  So if you use this function in the named query in your DSV, you will get a column width of 8,000 characters.  Although the Oracle REPLACE function is far more intelligent, the generated column size could still be way bigger than the maximum length of the data actually in the field. Now this may not be a problem when prototyping, but in your production cubes you really should clean up this kind of thing as these massive strings will add to processing times and storage space. Similarly, you do not want to forget to change the size of the dimension attribute if your database columns increase in size. Introducing CheckCubeDataTypes Utiltity The CheckCubeDataTypes application extracts all the data types and data sizes for all attributes in the cube and compares them to the data types and data sizes in the cube’s data source view.  It then generates an Excel CSV file which contains all this metadata along with a flag indicating if there is a mismatch between the DSV and the dimensional attribute.  Note that the app not only checks all the attribute keys but also the name and value columns for each attribute. Another benefit of having the metadata held in a CSV text file format is that you can place the file under source code control.  This allows you to compare the metadata of the previous cube release with your new release to highlight problems introduced by new development. You can download the C# source code from here: CheckCubeDataTypes.zip A typical example of the output Excel CSV file is shown below - note that the last column shows a data size mismatch by TRUE appearing in the column

    Read the article

  • Drawing multiple Textures as tilemap

    - by DocJones
    I am trying to draw a 2d game map and the objects on the map in a single pass. Here is my OpenGL initialization code // Turn off unnecessary operations glDisable(GL_DEPTH_TEST); glDisable(GL_LIGHTING); glDisable(GL_CULL_FACE); glDisable(GL_STENCIL_TEST); glDisable(GL_DITHER); glEnable(GL_BLEND); glEnable(GL_TEXTURE_2D); // activate pointer to vertex & texture array glEnableClientState(GL_VERTEX_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); My drawing code is being called by a NSTimer every 1/60 s. Here is the drawing code of my world object: - (void) draw:(NSRect)rect withTimedDelta:(double)d { GLint *t; glActiveTexture(GL_TEXTURE0); glBindTexture(GL_TEXTURE_2D, [_textureManager textureByName:@"blocks"]); glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_REPLACE); for (int x=0; x<[_map getWidth] ; x++) { for (int y=0; y<[_map getHeight] ; y++) { GLint v[] = { 16*x ,16*y, 16*x+16,16*y, 16*x+16,16*y+16, 16*x ,16*y+16 }; t=[_textureManager getBlockWithNumber:[_map getBlockAtX:x andY:y]]; glVertexPointer(2, GL_INT, 0, v); glTexCoordPointer(2, GL_INT, 0, t); glDrawArrays(GL_QUADS, 0, 4); } } } (_textureManager is a Singelton only loading a texture once!) The object drawing codes is identical (except the nested loops) in terms of OpenGL calls: - (void) drawWithTimedDelta:(double)d { GLint *t; GLint v[] = { 16*xpos ,16*ypos, 16*xpos+16,16*ypos, 16*xpos+16,16*ypos+16, 16*xpos ,16*ypos+16 }; glBindTexture(GL_TEXTURE_2D, [_textureManager textureByName:_textureName]); t=[_textureManager getBlockWithNumber:12]; glVertexPointer(2, GL_INT, 0, v); glTexCoordPointer(2, GL_INT, 0, t); glDrawArrays(GL_QUADS, 0, 4); } As soon as my central drawing routine calls the two drawing methods the second call overlays the first one. i would expect the call to world.draw to draw the map and "stamp" the objects upon it. Debugging shows me, that the first call is performed correctly (world is being drawn), but the following call to all objects ONLY draws the objects, the rest of the scene is getting black. I think i need to blend the drawn textures, but i cant seem to figure out how. Any help is appreciated. Thanks PS: Here is the github link to the project. It may not be in sync of my post here, but for some more in-depth analysis it may help.

    Read the article

  • Create USB installer from the command line?

    - by j-g-faustus
    I'm trying to create a bootable USB image to install Ubuntu on a new computer. I have done this before following the "create USB drive" instructions for Ubuntu desktop, but I don't have an Ubuntu desktop available. How can I do the same using only the command line? Things I've tried: Create bootable USB on Mac OS X following the ubuntu.com "create USB drive" instructions for Mac: Doesn't boot. usb-creator: According to apt-cache search usb-creator and Wikipedia usb-creator only exists as a graphical tool. "Create manually" instructions at help.ubuntu.com: None of the files and directories described (e.g. casper, filesystem.manifest, menu.lst) exist in the ISO image, and I don't know what has replaced them. unetbootin scripting: Requires X server (graphics support) to run, even when fully scripted. (The command sudo unetbootin lang=en method=diskimage isofile=~/ubuntu-10.10-server-amd64.iso installtype=USB targetdrive=/dev/sdg1 autoinstall=yes gives an error message unetbootin: cannot connect to X server.) Update Also tried GRUB fiddling: Merging information from pendrivelinux.com a related question on the Linux Stackexchange and a grub configuration example I was able to get halfway there - it booted from USB, displayed the grub menu and started the installation, but installation did not complete. For reference, this is the closest I got: sudo su # mount USB pen mount /dev/sd[X]1 /media/usb # install GRUB grub-install --force --no-floppy --root-directory=/media/usb /dev/sd[X] # copy ISO image to USB cp ~/ubuntu-10.10-server-amd64.iso /media/usb # mount ISO image, copy existing grub.cfg mount ~/ubuntu-10.10-server-amd64.iso /media/iso/ -o loop cp /media/iso/boot/grub/grub.cfg /media/usb/boot/grub/ I then edited /media/usb/boot/grub.cfg to add an .iso loopback, example grub entry: menuentry "Install Ubuntu Server" { set gfxpayload=keep loopback loop /ubuntu-10.10-server-amd64.iso linux (loop)/install/vmlinuz file=(loop)/preseed/ubuntu-server.seed iso-scan/filename=/ubuntu-10.10-server-amd64.iso quiet -- initrd (loop)/install/initrd.gz } When booting from USB, this would give me the Grub boot menu and start the installer, but the installer gave up after a couple of screens complaining that it couldn't find the CD-ROM drive. (Naturally, as the box I'm installing on doesn't have an optical drive.) I resolved this particular issue by giving up and doing the "create USB drive" routine using the Ubuntu Live desktop CD (on a computer that does have an optical drive), then the USB install works. But I expect that there is some way to do this from the command line of an Ubuntu system without X server and without an optical drive, so the question still stands. Does anyone know how?

    Read the article

  • A new name for unit tests

    - by Will
    I never used to like unit testing. I always thought it increased the amount of work I had to do. Turns out, that's only true in terms of the actual number of lines of code you write and furthermore, this is completely offset by the increase in the number of lines of useful code that you can write in an hour with tests and test driven development. Now I love unit tests as they allow me to write useful code, that quite often works first time! (knock on wood) I have found that people are reluctant to do unit tests or start a project with test driven development if they are under strict time-lines or in an environment where others don't do it, so they don't. Kinda like, a cultural refusal to even try. I think one of the most powerful things about unit testing is the confidence that it gives you to undertake refactoring. It also gives new found hope, that I can give my code to someone else to refactor/improve, and if my unit tests still work, I can use the new version of the library that they modified, pretty much, without fear. It's this last aspect of unit testing that I think needs a new name. The unit test is more like a contract of what this code should do now, and in the future. When I hear the word testing, I think of mice in cages, with multiple experiments done on them to see the effectiveness of a compound. This is not what unit testing is, we're not trying out different code to see what is the most affective approach, we're defining what outputs we expect with what inputs. In the mice example, unit tests are more like the definitions of how the universe will work as opposed to the experiments done on the mice. Am I on crack or does anyone else see this refusal to do testing and do they think it's a similar reason they don't want to do it? What reasons do you / others give for not testing? What do you think their motivations are in not unit testing? And as a new name for unit testing that might get over some of the objections, how about jContract? (A bit Java centric I know :), or Unit Contracts?

    Read the article

  • ArchBeat Top 10 for November 18-24, 2012

    - by Bob Rhubart
    The Top 10 most popular items shared on the OTN ArchBeat Facebook page for the week of November 18-24, 2012. One-Stop Shop for over 200 On-Demand Oracle Webcasts Webcasts can be a great way to get information about Oracle products without having to go cross-eyed reading yet another document off your computer screen. Oracle's new Webcast Center offers selectable filtering to make it easy to get to the information you want. Yes, you have to register to gain access, but that process is quick, and with over 200 webcasts to choose from you know you'll find useful content. Oracle SOA Suite 11g PS 5 introduces BPEL with conditional correlation for aggregation scenarios | Lucas Jellema An extensive, detailed technical post from Oracle ACE Director Lucas Jellema. Oracle Utilities Application Framework V4.2.0.0.0 Released | Anthony Shorten Principal Product Manager Anthony Shorten shares an overview of the changes implemented in the new release. Fault Handling and Prevention - Part 1 | Guido Schmutz and Ronald van Luttikhuizen In this technical article, part one of a four part series, Oracle ACE Directors Guido Schmutz and Ronald van Luttikhuizen guide you through an introduction to fault handling in a service-oriented environment using Oracle SOA Suite and Oracle Service Bus. Oracle BPM Process Accelerators and process excellence | Andrew Richards "Process Accelerators are ready-to-deploy solutions based on best practices to simplify process management requirements," says Capgemini's Andrew Richards. "They are considered to be 'product grade,' meaning they have been designed; engineered, documented and tested by Oracle themselves to a level that they can be deployed as-is for a solution to a problem or extended as appropriate for a particular scenario." Videos: Getting Started with Java Embedded | The Java Source Interested in Java Embedded? You'll want to check out these videos provided Tori Weildt, including interviews with Oracle's James Allen and Kevin Smith, recorded at ARM TechCon. JPA SQL and Fetching tuning ( EclipseLink ) | Edwin Biemond Oracle ACE Edwin Biemond's post illustrates how to "use the department and employee entity of the HR Oracle demo schema to explain the JPA options you have to control the SQL statements and the JPA relation Fetching." Devoxx 2012 Trip Report - clouds and sunshine | Markus Eisele Oracle ACE Director Markus Eisele shares an extensive and entertaining account of his experience at Devoxx 2012. Towards Ultra-Reusability for ADF - Adaptive Bindings | Duncan Mills "The task flow mechanism embodies one of the key value propositions of the ADF Framework," says Duncan Mills. "However, what if we could do more? How could we make task flows even more re-usable than they are today?" As you might expect, Duncan has answers for those questions. Java Specification Requests in Numbers | Markus Eisele Oracle ACE Director Markus Eisele shares some interesting data culled from the Java Community Process site. Thought for the Day "You can't have great software without a great team, and most software teams behave like dysfunctional families." — Jim McCarthy Source: SoftwareQuotes.com

    Read the article

  • Producing a smooth mesh from density cloud and marching cubes

    - by Wardy
    Based on my results from this question I decided to build myself a 3D noise map containing float values in place of my existing boolean point values. The effect I'm trying to produce is something like this, rather than typical rolling hills; which should explain the "missing cubes" in the image below. If I render my density map in normal "minecraft mode" (1 block per point in the density map) varying the size of the cube based on the value in my density map (floats in the range 0 to 1) I get something like this: I'm now happy that I can produce a density map for the marching cubes algorithm (which will need a little tweaking) but for some reason when I run it through my implementation it's not producing what I expect. My problem is that I'm getting something like the first image in this answer to my previous question, when I want to achieve the effect in the second image. Upon further investigation I can't see how marching cubes does the "move vertex along the edge" type logic (i.e. the difference between the two images on my previous link). I see that it does do some interpolation, but I'm not convinced I have the correct understanding of what I think it should do, because the code in question appears to give the same result regardless of whether I use boolean or float values. I took the code from here which is a C# implementation of marching cubes, but instead of using the MarchingCubesPrimitive I modified it to accept an object of type IDrawable, containing lists for the various collections (vertices, normals, UVs, indices), the logic was otherwise untouched. My understanding is that given a very low isovalue the accuracy level of the surface being rendered should increase, so in short "less 45 degree slows more rolling hills" type mesh output. However this isn't what I'm seeing. Have I missed something or is the implementation flawed and need to be fixed? EDIT: A little more detail on what I am seeing when I "marching cube" the data. Ok so firstly, ignore the fact that the meshes created by the chunks don't "connect" (i'll probably raise another question about this later). Then look at the shaping of the island, it's too ... square, from the voxels rendered as boxes you get the impression there's a clean soft gradual hill and yet from the image there are sharp falling edges even in the most central areas where the gradient in the first image looks the most smooth. The data is "regenerated" each time I run this so no 2 islands come out the same, and it's purely random so not based on noise, but still, how can it look so smooth in 1 image and so not smooth in the other?

    Read the article

  • IRM and Consumerization

    - by martin.abrahams
    As the season of rampant consumerism draws to its official close on 12th Night, it seems a fitting time to discuss consumerization - whereby technologies from the consumer market, such as the Android and iPad, are adopted by business organizations. I expect many of you will have received a shiny new mobile gadget for Christmas - and will be expecting to use it for work as well as leisure in 2011. In my case, I'm just getting to grips with my first Android phone. This trend developed so much during 2010 that a number of my customers have officially changed their stance on consumer devices - accepting consumerization as something to embrace rather than resist. Clearly, consumerization has significant implications for information control, as corporate data is distributed to consumer devices whether the organization is aware of it or not. I daresay that some DLP solutions can limit distribution to some extent, but this creates a conflict between accepting consumerization and frustrating it. So what does Oracle IRM have to offer the consumerized enterprise? First and foremost, consumerization does not automatically represent great additional risk - if an enterprise seals its sensitive information. Sealed files are encrypted, and that fundamental protection is not affected by copying files to consumer devices. A device might be lost or stolen, and the user might not think to report the loss of a personally owned device, but the data and the enterprise that owns it are protected. Indeed, the consumerization trend is another strong reason for enterprises to deploy IRM - to protect against this expansion of channels by which data might be accidentally exposed. It also enables encryption requirements to be met even though the enterprise does not own the device and cannot enforce device encryption. Moving on to the usage of sealed content on such devices, some of our customers are using virtual desktop solutions such that, in truth, the sealed content is being opened and used on a PC in the normal way, and the user is simply using their device for display purposes. This has several advantages: The sensitive documents are not actually on the devices, so device loss and theft are even less of a worry The enterprise has another layer of control over how and where content is used, as access to the virtual solution involves another layer of authentication and authorization - defence in depth It is a generic solution that means the enterprise does not need to actively support the ever expanding variety of consumer devices - the enterprise just manages some virtual access to traditional systems using something like Citrix or Remote Desktop services. It is a tried and tested way of accessing sealed documents. People have being using Oracle IRM in conjunction with Citrix and Remote Desktop for several years. For some scenarios, we also have the "IRM wrapper" option that provides a simple app for sealing and unsealing content on a range of operating systems. We are busy working on other ways to support the explosion of consumer devices, but this blog is not a proper forum for talking about them at this time. If you are an Oracle IRM customer, we will be pleased to discuss our plans and your requirements with you directly on request. You can be sure that the blog will cover the new capabilities as soon as possible.

    Read the article

  • TypeScript first impressions

    - by Bertrand Le Roy
    Anders published a video of his new project today, which aims at creating a superset of JavaScript, that compiles down to regular current JavaScript. Anders is a tremendously clever guy, and it always shows in his work. There is much to like in the enterprise (good code completion, refactoring and adoption of the module pattern instead of namespaces to name three), but a few things made me rise an eyebrow. First, there is no mention of CoffeeScript or Dart, but he does talk briefly about Script# and GWT. This is probably because the target audience seems to be the same as the audience for the latter two, i.e. developers who are more comfortable with statically-typed languages such as C# and Java than dynamic languages such as JavaScript. I don’t think he’s aiming at JavaScript developers. Classes and interfaces, although well executed, are not especially appealing. Second, as any code generation tool (and this is true of CoffeeScript as well), you’d better like the generated code. I didn’t, unfortunately. The code that I saw is not the code I would have written. What’s more, I didn’t always find the TypeScript code especially more expressive than what it gets compiled to. I also have a few questions. Is it possible to duck-type interfaces? For example, if I have an IPoint2D interface with x and y coordinates, can I pass any object that has x and y into a function that expects IPoint2D or do I need to necessarily create a class that implements that interface, and new up an instance that explicitly declares its contract? The appeal of dynamic languages is the ability to make objects as you go. This needs to be kept intact. More technical: why are generated variables and functions prefixed with _ rather than the $ that the EcmaScript spec recommends for machine-generated variables? In conclusion, while this is a good contribution to the set of ideas around JavaScript evolution, I don’t expect a lot of adoption outside of the devoted Microsoft developers, but maybe some influence on the language itself. But I’m often wrong. I would certainly not use it because I disagree with the central motivation for doing this: Anders explicitly says he built this because “writing application-scale JavaScript is hard”. I would restate that “writing application-scale JavaScript is hard for people who are used to statically-typed languages”. The community has built a set of good practices over the last few years that do scale quite well, and many people are successfully developing and maintaining impressive applications directly in JavaScript. You can play with TypeScript here: http://www.typescriptlang.org

    Read the article

  • Azure Service Bus - Authorization failure

    - by Michael Stephenson
    I fell into this trap earlier in the week with a mistake I made when configuring a service to send and listen on the azure service bus and I thought it would be worth a little note for future reference as I didnt find anything online about it.  After configuring everything when I ran my code sample I was getting the below error. WebHost failed to process a request.Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/28316044Exception: System.ServiceModel.ServiceActivationException: The service '/-------/BrokeredMessageService.svc' cannot be activated due to an exception during compilation.  The exception message is: Generic: There was an authorization failure. Make sure you have specified the correct SharedSecret, SimpleWebToken or Saml transport client credentials.. ---> Microsoft.ServiceBus.AuthorizationFailedException: Generic: There was an authorization failure. Make sure you have specified the correct SharedSecret, SimpleWebToken or Saml transport client credentials.   at Microsoft.ServiceBus.RelayedOnewayTcpClient.ConnectRequestReplyContext.Send(Message message, TimeSpan timeout, IDuplexChannel& channel)   at Microsoft.ServiceBus.RelayedOnewayTcpListener.RelayedOnewayTcpListenerClient.Connect(TimeSpan timeout)   at Microsoft.ServiceBus.RelayedOnewayTcpClient.EnsureConnected(TimeSpan timeout)   at Microsoft.ServiceBus.Channels.CommunicationObject.Open(TimeSpan timeout)   at Microsoft.ServiceBus.Channels.RefcountedCommunicationObject.Open(TimeSpan timeout)   at Microsoft.ServiceBus.RelayedOnewayChannelListener.OnOpen(TimeSpan timeout)   at Microsoft.ServiceBus.Channels.CommunicationObject.Open(TimeSpan timeout)   at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)   at Microsoft.ServiceBus.SocketConnectionTransportManager.OnOpen(TimeSpan timeout)   at Microsoft.ServiceBus.Channels.TransportManager.Open(TimeSpan timeout, TransportChannelListener channelListener)   at Microsoft.ServiceBus.Channels.TransportManagerContainer.Open(TimeSpan timeout, SelectTransportManagersCallback selectTransportManagerCallback)   at Microsoft.ServiceBus.SocketConnectionChannelListener`2.OnOpen(TimeSpan timeout)   at Microsoft.ServiceBus.Channels.CommunicationObject.Open(TimeSpan timeout)   at Microsoft.ServiceBus.Channels.CommunicationObject.Open(TimeSpan timeout)   at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(String normalizedVirtualPath)   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)   --- End of inner exception stack trace ---   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)   at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath)Process Name: w3wpProcess ID: 8056As recommended by the error message I checked everything about the application configuration and also the keys and eventually I found the problem.When I set the permissions in the ACS rule group I had copied and pasted the claim name for net.windows.servicebus.action from the Azure portal and hadnt spotted the <space> character on the end of it like you sometimes pick up when copying text in the browser.  This meant that the listen and send permissions were not setup correctly which is why (as you would expect) my two applications could not connect to the service bus.So lesson learnt here, if you do copy and paste into the ACS rules just be careful you dont leave a space on the end of anything otherwise it will be difficult to spot that its configured incorrectly

    Read the article

  • Java EE 7 turns one today!

    - by delabassee
    "Tell me and I forget. Teach me and I remember. Involve me and I learn." (Benjamin Franklin) Today marks the first year anniversary of Java EE 7. The JSR 342 specification was finalised on May 28, 2013 with the official launch taking place on June 12, 2013 (original press release). As of today, there are already 3 Java EE 7 compatible Application Servers, coming from different 'vendors' (Oracle, TmaxSoft and Red Hat). Two of those Java EE 7 Application Servers are free and open source. We expect the list of Java EE 7 compatible Application Servers to grow over the coming months. Source: RebelLabs - 'Java Tools and Technologies Landscape for 2014' According to a recent independent survey, one third of the Java EE users who participated in that survey is already using Java EE 7. This is a good sign but it also means that a lot of people are not yet on Java EE 7. So if you haven't yet embarked on Java EE 7, now is really the time to do so! There are various ways to learn Java EE 7, in no particular order ... Continue to read The Aquarium. Through this blog, we are relaying Java EE news but we are also doing our best to highlight relevant technical contents such as articles, community tutorials, etc. Watch the GlassFish YouTube channel. Amongst others, it contains the different videos of the Java EE 7 launch, those videos will give you good technical update on Java EE and its different components specifications (JMS 2.0, JAX-RS 2.0, EJB 3.2, etc.) Take a formal training. Oracle University is starting to roll-out Java EE 7 trainings like the 'Java EE 7: New Features' class.  Attend conferences and JUGs sessions. On that note, we have spent a lot of time to create a strong JavaOne 'Server-Side Java' track. It's still possible to benefit from the early bird JavaOne pricing but don't wait too much! Read books. There are more than 25 (!) books related to Java EE 7 or to one of the Java EE 7 component specification.  There are many more ways to learn Java EE but if I have to suggest one and only one way, I would recommend the Java EE 7 Tutorial. It's exhaustive and clear, it's free and it continues to evolve. And finally as the introductory quote suggest, participation is key to learning. Participate in JUGs,  participate in Adopt-a-JSR, get involved in the different open source communities evolving around Java EE, participate in the JCP... in one word, participate!

    Read the article

  • The challenge of giving a positive No

    - by MarkPearl
    I find it ironic that the more I am involved in the software industry, the more apparent it becomes that soft skills are just as if not more important than the technical abilities of a developer. One of the biggest challenges I have faced in my career is in managing client expectations to what one can deliver and being able to work with multiple clients. If I look at where things commonly go pear shaped, one area features a lot is where I should have said "No" to a request, but because of the way the request was made I ended up saying yes. Time and time again this has caused immense pain. Thus, when I saw on Amazon that they had a book titled "The power of a positive no" by William Ury I had to buy it and read it. In William's book he explains an approach to saying No that while extremely simple does change the way a No is presented. In essence he talks of a pattern the Yes! > No > Yes? Pattern. 1. Yes! -> positively and concretely describing your core interests and values 2. No. -> explicitly link your no to this YES! 3. Yes? -> suggest another positive outcome or agreement to the other person Let me explain how I understood it. If you are working on a really important project and someone asks you to do add a quick feature to another project, your Yes! would be to the more important project, which would mean a No to the quick feature, and an option for your Yes? may be an alternative time when you can look at it.. An example of an appropriate response would be... It is really important that I keep to the commitment that I made to this customer to finish his project on time so I cannot work on your feature right now but I am available to help you in a weeks time. William then goes on to explain the type of behaviour a person may display when the no is received. He illustrates this with a diagram called the curve of acceptance. William points out that if you are aware of the type of behaviour you can expect it empowers you to stay true to your no. Personally I think reading and having an understanding of the “soft” side of things like saying no is invaluable to a developer.

    Read the article

  • Windows Azure Diagnostics: Next to Useless?

    - by Your DisplayName here!
    To quote my good friend Christian: “Tracing is probably one of the most discussed topics in the Windows Azure world. Not because it is freaking cool – but because it can be very tedious and partly massively counter-intuitive.” <rant> The .NET Framework has this wonderful facility called TraceSource. You define a named trace and route that to a configurable listener. This gives you a lot of flexibility – you can create a single trace file – or multiple ones. There is even nice tooling around that. SvcTraceViewer from the SDK let’s you open the XML trace files – you can filter and sort by trace source and event type, aggreate multiple files…blablabla. Just what you would expect from a decent tracing infrastructure. Now comes Windows Azure. I was already were grateful that starting with the SDK 1.2 we finally had a way to do tracing and diagnostics in the cloud (kudos!). But the way the Azure DiagnosticMonitor is currently implemented – could be called flawed. The Azure SDK provides a DiagnosticsMonitorTraceListener – which is the right way to go. The only problem is, that way this works is, that all traces (from all sources) get written to an ETW trace. Then the DiagMon listens to these traces and copies them periodically to your storage account. So far so good. But guess what happens to your nice trace files: the trace source names get “lost”. They appear in your message text at the end. So much for filtering and sorting and aggregating (regex #fail or #win??). Every trace line becomes an entry in a Azure Storage Table – the svclog format is gone. So much for the existing tooling. To solve that problem, one workaround was to write your own trace listener (!) that creates svclog files inside of local storage and use the DiagMon to copy those. Christian has a blog post about that. OK done that. Now it turns out that this mechanism does not work anymore in 1.3 with FullIIS (see here). Quoting: “Some IIS 7.0 logs not collected due to permissions issues...The root cause to both of these issues is the permissions on the log files.” And the workaround: “To read the files yourself, log on to the instance with a remote desktop connection.” Now then have fun with your multi-instance deployments…. </rant>

    Read the article

  • What are the default mount settings for mount / fstab?

    - by John Craick
    What are the default mounting options for a non root partition ? The man entry for mount says ... defaults - use default options: rw, suid, dev, exec, auto, nouser, and async. ... so that might be what we expect to see. But, unless I'm missing something, that's not what happens. I have an ext3 partition labelled "NewHome20G" which is seen as /dev/sdc6 by the system. This we can see from ... root@john-pc1204:~# blkid | grep NewHome20G /dev/sdc6: LABEL="NewHome20G" UUID="d024bad5-906c-46c0-b7d4-812daf2c9628" TYPE="ext3" I have an entry in fstab as follows ... root@john-pc1204:~# cat /etc/fstab | grep NewHome LABEL=NewHome20G /media/NewHome20G ext3 rw,nosuid,nodev,exec,users 0 2 Note the option settings that are specified in that fstab line. Now I look at how the partition is actually mounted after boot up ... root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,noexec,nosuid,nodev) [NewHome20G] ... so, when the filesystem gets mounted the exec & users options I specified seem to have been ignored. Just to be sure, I unmount sdc6, remount it and look at the mount options again ... root@john-pc1204:~# umount /dev/sdc6 root@john-pc1204:~# mount /dev/sdc6 root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,noexec,nosuid,nodev) [NewHome20G] .... same result Now I unmount the partition again, remount it specifying the exec option and look at the result ... root@john-pc1204:~# umount /dev/sdc6 root@john-pc1204:~# mount /dev/sdc6 -o exec root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,nosuid,nodev) [NewHome20G] ... and here the exec option has finally taken effect and the noexec setting has vanished. Just for interest, I re-mount the partition with the defaults option root@john-pc1204:~# umount /dev/sdc6 root@john-pc1204:~# mount /dev/sdc6 -o defaults root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,noexec,nosuid,nodev) [NewHome20G] The noexec is back, so it looks very like rw,noexec,nosuid,nodev are the default options which is NOT what man says. Why does this matter ? I have a folder full of useful scripts stored on a data disk. Because that disk is mounted noexec those scripts won't run, even though they have all been set with chmod 777. I can work round this in several ways but it's disappointing that the man entry seems to be wrong. Have I missed something obvious here or have the default options in Ubuntu changed from what they were a few versions ago ?

    Read the article

  • Code review recommendations and Code Smells

    - by Michael Freidgeim
    Some time ago Twitter told that I am similar to Boris Lipschitz . Indeed he is also .Net programmer from Russia living in Australia. I‘ve read his list of Code Review points and found them quite comprehensive. A few points  were not clear for me, and it forced me for a further reading.In particular the statement “Exception should not be used to return a status or an error code.” wasn’t fully clear for me, because sometimes we store an exception as an object with all error details and I believe it’s a valid approach. However I agree that throwing exceptions should be avoided, if you expect to return error as a part of a normal flow. Related link: http://codeutopia.net/blog/2010/03/11/should-a-failed-function-return-a-value-or-throw-an-exception/ Another point slightly puzzled me“If Thread.Sleep() is used, can it be replaced with something else, ei Timer, AutoResetEvent, etc” . I believe, that there are very rare cases, when anyone using Thread.Sleep in any production code. Usually it is used in mocks and prototypes.I had to look further to clarify “Dependency injection is used instead of Service Location pattern”.Even most of articles has some preferences to Dependency injection, there are also advantages to use Service Location. E.g see http://geekswithblogs.net/KyleBurns/archive/2012/04/27/dependency-injection-vs.-service-locator.aspx. http://www.cookcomputing.com/blog/archives/000587.html  refers to Concluding Thoughts of Martin Fowler The choice between Service Locator and Dependency Injection is less important than the principle of separating service configuration from the use of services within an applicationThe post had a link to excellent article Code Smells of Jeff Atwood, but the statement, that “code should not pass a review if it violates any of the  code smells” sound too strict for my environment. In particular, I disagree with “Dead Code” recommendation “Ruthlessly delete code that isn't being used. That's why we have source control systems!”. If there is a chance that not used code will be required in a future, it is convenient to keep it as commented or #if/#endif blocks with appropriate explanation, why it could be required in the future. TFS is a good source control system, but context search in source code of current solution is much easier than finding something in the previous versions of the code.I also found a link to a good book “Clean Code.A.Handbook.of.Agile.Software”

    Read the article

  • 0xC0017011 and other error messages - what is the error message text?

    Recently there was a bug raised against BIDS Helper which originated in my Expression Editor control. Thankfully the person that raised it kindly included a screenshot, so I had the error code (HRESULT 0xC0017011) and a stack trace that pointed the finger firmly at my control, but no error message text. The code itself looked fine so I searched on the error code but got no results. I’d expected to get a hit from Books Online with the Integration Services Error and Message Reference topic at the very least, but no joy. There is however a more accurate and definitive reference, namely the header file that defines all these codes dtsmsg.h which you can find at- C:\Program Files (x86)\Microsoft SQL Server\110\SDK\Include\dtsmsg.h Looking the code up in the header file gave me a much more useful error message. //////////////////////////////////////////////////////////////////////////// // The parameter is sensitive // // MessageId: DTS_E_SENSITIVEPARAMVALUENOTALLOWED // // MessageText: // // Accessing value of the parameter variable for the sensitive parameter "%1!s!" is not allowed. Verify that the variable is used properly and that it protects the sensitive information. // #define DTS_E_SENSITIVEPARAMVALUENOTALLOWED ((HRESULT)0xC0017011L) Unfortunately I’d forgotten all about this. By the time I had remembered about it, the person who raised the issue had managed to narrow it down to something to do with having  sensitive parameter. Putting that together with the error message I’d finally found, a quick poke around in the code and I found the new GetSensitiveValue method which seemed to do the trick. The HResult fields are also listed online but it only shows the short error message, and it doesn’t include that all so important HRESULT value itself. So let this be a lesson to you (and me!), if you need to check  SSIS error go straight to the horses mouth - dtsmsg.h. This is particularly true when working with early builds, or CTP releases when we expect the documentation to be a bit behind. There is also a programmatic approach to getting better SSIS error messages. I should to take another look at the error handling in the control, or the way it is hosted in BIDS Helper. I suspect that if I use an implementation of Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSInfoEvents100 I could catch the error itself and get the full error message text which I could then report back. This would obviously be a better user experience and also make it easier to diagnose any issues like this in the future. See ExprssionEvaluator.cs for an example of this in use in the Expression Editor control.

    Read the article

  • 2011 - ALMs for your development team and the people they work with.

    - by David V. Corbin
    Welcome to 2011, it is already shaping up to be a very exciting year. The title of the post is not about charitable giving, although that is also a great topic. Application Lifecycle Management and the Systems that support the environment is, and 2011 will be a year where I expect many teams to invest heavily in this area. For those not familiar with ALM, it can be simplified down to "A comprehensive view of all of the iteas, requirements, activities and artifacts that impact an application over the course of its lifecycle, from concept until decommissioning". Obviously, this encompases a large number of different areas even for relatively small and medium sized projects. In recent years, many teams have adapted methodoligies which address individual aspects of this; but the majority of this adoption has resulted in "islands of improvement" rather than the desired comprehensive outcome...Until now! Last year Microsoft released Team Foundation Server 2010 along with Visual Studio 2010 Ultimate Edition, and with these two in combination the situation has drastically changed. At last there is a single environment that is capable of handling all aspects of ALM, and is also capable of dealing with migration and integration with existing systems to make the transition to a single solution much easier. Thse possibilities (and practicalities) are nothing short of amazing, Architecture thru Testing integration? YES. Being able to correlate specific requirement items (and their history) to actual code (and code history)? YES. Identification of which tests will be potentially impacted by a given code change? YES. Resiliant Automated Testing of User Interfaces? YES. Automatic Deployment Management? YES. Integraton Level testing as part of (designated) Builds? YES. I could easily double or triple the above list, but these items should be enough to get you thinking about the "pain points" your team and organization currently face and the fact that there IS a way to relieve the pain. Over the course of the year, I am hoping to bring together some of the "best of breed" information, along with hosting (and participating in) discussions with various experts in the field. There are already a number of groups (including many on LinkedIn) that have an ALM focus, and I encourage everyone out to check them out. I will be posting a list of the ones I find most helpful in the not too distant future. As I said at the beginning, 2011 is shaping up to be a very interesting (and productive) year. Why wait to start investigating and adopting ALM? ps: For those interested in becoming an "Alms Giver" in the charitable sense, I highly recommend checking out GiveCamp. A group of developers, designers and others get together to create a solution for a charity in just under 48 hours. I will be attending the GiveCamp in New York City on Jan 14-16, more information is available at nycgivecamp.org/

    Read the article

  • String contains trailing zeroes when converted from decimal [migrated]

    - by Locke
    I've run into an unusual quirk in a program I'm writing, and I was trying to figure out if anyone knew the cause. Note that fixing the issue is easy enough. I just can't figure out why it is happening in the first place. I have a WinForms program written in VB.NET that is displaying a subset of data. It contains a few labels that show numeric values (the .Text property of the labels are being assigned directly from the Decimal values). These numbers are being returned by a DLL I wrote in C#. The DLL calls a webservice which initially returns the values in question. It returns one as a string, the other as a decimal (I don't have any control over the webservice, I just consume it). The DLL assigns these to properties on an object (both of which are decimals) then returns that object back to the WinForm program that called the DLL. Obviously, there's a lot of other data being consumed from the webservice, but no other operations are happening which could modify these properties. So, the short version is: WinForm requests a new Foo from the DLL. DLL creates object Foo. DLL calls webservice, which returns SomeOtherFoo. //Both Foo.Bar1 and Foo.Bar2 are decimals Foo.Bar1 = decimal.Parse(SomeOtherFoo.Bar1); //SomeOtherFoo.Bar1 is a string equal to "2.9000" Foo.Bar2 = SomeOtherFoo.Bar2; //SomeOtherFoo.Bar2 is a decimal equal to 2.9D DLL returns Foo to WinForm. WinForm.lblMockLabelName1.Text = Foo.Bar1 //Inspecting Foo.Bar1 indicates my value is 2.9D WinForm.lblMockLabelName2.Text = Foo.Bar2 //Inspecting Foo.Bar2 also indicates I'm 2.9D So, what's the quirk? WinForm.lblMockLabelName1.Text displays as "2.9000", whereas WinForm.lblMockLabelname2.Text displays as "2.9". Now, everything I know about C# and VB indicates that the format of the string which was initially parsed into the decimal should have no bearing on the outcome of a later decimal.ToString() operation called on the same decimal. I would expect that decimal.Parse(someDecimalString).ToString() would return the string without any trailing zeroes. Everything I find online seems to corroborate this (there are countless Stack Overflow questions asking exactly the opposite...how to keep the formatting from the initial parsing). At the moment, I've just removed the trailing zeroes from the initial string that gets parsed, which has hidden the quirk. However, I'd love to know why it happens in the first place.

    Read the article

  • Using machine learning to aim mirrors in a solar array?

    - by Buttons840
    I've been thinking about solar collectors where several independent mirrors to focus the light on a solar collector, similar to the following design from Energy Innovations. Because there will be flaws in the assembly of this solar array, I am proceeding with the following assumptions (or lack thereof): The software knows the "position" of each mirror, but doesn't know how this position relates to the real world or to other mirrors. This will account for poor mirror calibration or other environmental factors which may effect one mirror but not the others. If a mirror moves 10 units in one direction, and then 10 units in the opposite direction, it will end up where it originally started. I would like to use machine learning to position the mirrors correctly and focus the light on the collector. I expect I would approach this as an optimization problem, optimizing the mirror positions to maximize the heat inside the collector and the power output. The problem is finding a small target in a noisy high-dimensional space (considering each mirror has 2 axis of rotation). Some of the problems I anticipate are: cloudy days, even if you stumble upon the perfect mirror alignment, it might be cloudy at the time noisy sensor data the sun is a moving target, it moves along a path, and follows a different path every day - although you could calculate the exact position of the sun at any time, you wouldn't know how that position relates to your mirrors My question isn't about the solar array, but possible machine learning techniques that would help in this "small target in a noisy high dimensional-space" problem. I mentioned the solar array because it was the catalyst for this question and a good example. What machine learning techniques can find such a small target in a noisy high-dimensional space? EDIT: A few additional thoughts: Yes, you can calculate the suns position in the real world, but you don't know how the mirrors position is related to the real world (unless you've learned it somehow). You might know the suns azimuth is 220 degrees, and the suns elevation is 60 degrees, and you might know a mirror is at position (-20, 42); now tell me, is that mirror correctly aligned with the sun? You don't know. Lets assume you have some very sophisticated heat measurements, and you know "with this heat level, there must be 2 mirrors correctly aligned". Now the question is, which two mirrors (out of 25 or more) are correctly aligned? One solution I considered was to approximate the correct "alignment function" using a neural network which would take the suns azimuth and elevation as input and output a large array with 2 values for each mirror which correspond to the 2 axis of each mirror. I'm not sure what the best training method is though.

    Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >