Search Results

Search found 4141 results on 166 pages for 'router'.

Page 114/166 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• Weird WLAN connection

  - by tuelsch

  I assembled my first computer on my own. As I realised it had no WLAN (AsRock Z77 Extreme 4m) I bought a WLAN stick (ZyXel NWD 2105), plugged it in, started the setup from the CD and it worked, until I restarted the PC. That's when the problems started. The stick is able to connect to the router (P-660HN-F1Z) and the connection is stable, but not the internet access. In estimately 1 minute intervals there might be a short connection timeframe and dropbox or windows update are able to download some data, but as soon as I try to open a website the internet access is away. Note that the connection to the router does not shut down and remains stable at around 80-90%. The problem is definetly located on my pc, because with my laptop and phone the connection is stable and fast. Because I was so pissed off, I bought a EW-7612PIn V2 (PCI-E WLAN adapter), same problem. Now the weird thing is, if I don't use the PC for about 2 days, start it up, there is internet access (happened with both the stick and the PCI-E card). A bit slow, but it does not get away just like that, until I shut it down. Then, no matter how many times I restart, it won't come back. I googled a lot but now I'm at the end with my latin. Has anyone had a similar problem and resolved it? Technical details: Motherboard: AsRock Z77 Extreme 4M OS: Windows 7 professional 64bit Stick: Zyxel wireless N adapter NWD2105 PCI-E card: Edimax EW-7612PIn V2 Router: ZyXel P-660HN-F1Z Windows-IP-Konfiguration Hostname . . . . . . . . . . . . : xyz Primäres DNS-Suffix . . . . . . . : Knotentyp . . . . . . . . . . . . : Hybrid IP-Routing aktiviert . . . . . . : Nein WINS-Proxy aktiviert . . . . . . : Nein Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung 5: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter # 3 Physikalische Adresse . . . . . . : 80-1F-02-61-C0-A6 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung 4: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Edimax 802.11n Wireless Adapter Physikalische Adresse . . . . . . : 80-1F-02-61-C0-A6 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Verbindungslokale IPv6-Adresse . : fe80::38d2:f489:726d:1fb5%17(Bevorzugt) IPv4-Adresse . . . . . . . . . . : 192.168.1.41(Bevorzugt) Subnetzmaske . . . . . . . . . . : 255.255.255.0 Lease erhalten. . . . . . . . . . : Donnerstag, 15. November 2012 10:51:05 Lease läuft ab. . . . . . . . . . : Sonntag, 18. November 2012 10:51:18 Standardgateway . . . . . . . . . : 192.168.1.1 DHCP-Server . . . . . . . . . . . : 192.168.1.1 DHCPv6-IAID . . . . . . . . . . . : 578821890 DHCPv6-Client-DUID. . . . . . . . : 00-01-00-01-17-FF-D5-FE-BC-5F-F4-48-FC-4B DNS-Server . . . . . . . . . . . : 91.233.182.2 194.230.1.39 NetBIOS über TCP/IP . . . . . . . : Aktiviert Tunneladapter isatap.{263BEB98-344B-435C-888F-1B15B97C3AC1}: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja Tunneladapter Teredo Tunneling Pseudo-Interface: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja IPv6-Adresse. . . . . . . . . . . : 2001:0:9d38:6ab8:209c:2944:3f57:fed6(Bevo rzugt) Verbindungslokale IPv6-Adresse . : fe80::209c:2944:3f57:fed6%11(Bevorzugt) Standardgateway . . . . . . . . . : :: NetBIOS über TCP/IP . . . . . . . : Deaktiviert C:\Users\xyz>ping 192.168.1.1 Ping wird ausgeführt für 192.168.1.1 mit 32 Bytes Daten: Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Ping-Statistik für 192.168.1.1: Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0 (0% Verlust), Ca. Zeitangaben in Millisek.: Minimum = 2ms, Maximum = 2ms, Mittelwert = 2ms

  Read the article

• compass-rails 1.03 - TypeError: can't convert nil into String

  - by Romiko

  I am running: ruby 1.9.3p392 (2013-02-22) [i386-mingw32] compass-rails 1.0.3 I used the Windows RailsInstaller to install Ruby on Rails Gemfile group :assets do gem 'sass-rails', '~> 3.2.3' gem 'coffee-rails', '~> 3.2.1' gem 'compass-rails','~> 1.0.2' # See https://github.com/sstephenson/execjs#readme for more supported runtimes # gem 'therubyracer', :platforms => :ruby gem 'uglifier', '>= 1.0.3' end I am currently experiencing issues importing sprites. My sprites are in: assets/images/source in my _shared.scss file I have: //Sprites @import "./source/*.png"; $source-sprite-dimensions: true; In my application.scss I have: /* * This is a manifest file that'll be compiled into application.css, which will include all the files * listed below. * * Any CSS and SCSS file within this directory, lib/assets/stylesheets, vendor/assets/stylesheets, * or vendor/assets/stylesheets of plugins, if any, can be referenced here using a relative path. * * You're free to add application-wide styles to this file and they'll appear at the top of the * compiled file, but it's generally better to create a new file per style scope. * *= require_self */ @import "_shared.scss"; @import "baseline.scss"; @import "global.scss"; @import "normalize.scss"; @import "print.scss"; @import "desktop.scss"; @import "tablet.scss"; @import "home.css.scss"; I am also using rails server and not compass watcher. However when I browse to the page at localhost:3000/assets/application.css, I get the following error: body:before { font-weight: bold; content: "\000a TypeError: can't convert nil into String\000a (in c:\002f RangerRomOnRails\002f RangerRom\002f app\002f assets\002f stylesheets\002f desktop.scss)"; } body:after { content: "\000a C:\002f RailsInstaller\002f Ruby1.9.3\002f lib\002f ruby\002f gems\002f 1.9.1\002f gems\002f compass-0.12.2\002f lib\002f compass\002f sass_extensions\002f functions\002f image_size.rb:17:in `extname'"; } Here is the full stack trace: compass (0 .12.2) lib/compass/sass_extensions/functions/image_size.rb:17:in `extname' compass (0.12.2) lib/compass/sass_extensions/functions/image_size.rb:17:in `initialize' compass (0.12.2) lib/compass/sass_extensions/functions/image_size.rb:50:in `new' compass (0.12.2) lib/compass/sass_extensions/functions/image_size.rb:50:in `image_dimensions' compass (0.12.2) lib/compass/sass_extensions/functions/image_size.rb:4:in `image_width' sass (3.2.9) lib/sass/script/funcall.rb:112:in `_perform' sass (3.2.9) lib/sass/script/node.rb:40:in `perform' sass (3.2.9) lib/sass/tree/visitors/perform.rb:298:in `visit_prop' sass (3.2.9) lib/sass/tree/visitors/base.rb:37:in `visit' sass (3.2.9) lib/sass/tree/visitors/perform.rb:100:in `visit' sass (3.2.9) lib/sass/tree/visitors/base.rb:53:in `block in visit_children' sass (3.2.9) lib/sass/tree/visitors/base.rb:53:in `map' sass (3.2.9) lib/sass/tree/visitors/base.rb:53:in `visit_children' sass (3.2.9) lib/sass/tree/visitors/perform.rb:109:in `block in visit_children' sass (3.2.9) lib/sass/tree/visitors/perform.rb:121:in `with_environment' sass (3.2.9) lib/sass/tree/visitors/perform.rb:108:in `visit_children' sass (3.2.9) lib/sass/tree/visitors/base.rb:37:in `block in visit' sass (3.2.9) lib/sass/tree/visitors/perform.rb:320:in `visit_rule' sass (3.2.9) lib/sass/tree/visitors/base.rb:37:in `visit' sass (3.2.9) lib/sass/tree/visitors/perform.rb:100:in `visit' sass (3.2.9) lib/sass/tree/visitors/base.rb:53:in `block in visit_children' sass (3.2.9) lib/sass/tree/visitors/base.rb:53:in `map' sass (3.2.9) lib/sass/tree/visitors/base.rb:53:in `visit_children' sass (3.2.9) lib/sass/tree/visitors/perform.rb:109:in `block in visit_children' sass (3.2.9) lib/sass/tree/visitors/perform.rb:121:in `with_environment' sass (3.2.9) lib/sass/tree/visitors/perform.rb:108:in `visit_children' sass (3.2.9) lib/sass/tree/visitors/base.rb:37:in `block in visit' sass (3.2.9) lib/sass/tree/visitors/perform.rb:320:in `visit_rule' sass (3.2.9) lib/sass/tree/visitors/base.rb:37:in `visit' sass (3.2.9) lib/sass/tree/visitors/perform.rb:100:in `visit' sass (3.2.9) lib/sass/tree/visitors/base.rb:53:in `block in visit_children' sass (3.2.9) lib/sass/tree/visitors/base.rb:53:in `map' sass (3.2.9) lib/sass/tree/visitors/base.rb:53:in `visit_children' sass (3.2.9) lib/sass/tree/visitors/perform.rb:109:in `block in visit_children' sass (3.2.9) lib/sass/tree/visitors/perform.rb:121:in `with_environment' sass (3.2.9) lib/sass/tree/visitors/perform.rb:108:in `visit_children' sass (3.2.9) lib/sass/tree/visitors/base.rb:37:in `block in visit' sass (3.2.9) lib/sass/tree/visitors/perform.rb:362:in `visit_media' sass (3.2.9) lib/sass/tree/visitors/base.rb:37:in `visit' sass (3.2.9) lib/sass/tree/visitors/perform.rb:100:in `visit' sass (3.2.9) lib/sass/tree/visitors/base.rb:53:in `block in visit_children' sass (3.2.9) lib/sass/tree/visitors/base.rb:53:in `map' sass (3.2.9) lib/sass/tree/visitors/base.rb:53:in `visit_children' sass (3.2.9) lib/sass/tree/visitors/perform.rb:109:in `block in visit_children' sass (3.2.9) lib/sass/tree/visitors/perform.rb:121:in `with_environment' sass (3.2.9) lib/sass/tree/visitors/perform.rb:108:in `visit_children' sass (3.2.9) lib/sass/tree/visitors/base.rb:37:in `block in visit' sass (3.2.9) lib/sass/tree/visitors/perform.rb:128:in `visit_root' sass (3.2.9) lib/sass/tree/visitors/base.rb:37:in `visit' sass (3.2.9) lib/sass/tree/visitors/perform.rb:100:in `visit' sass (3.2.9) lib/sass/tree/visitors/perform.rb:7:in `visit' sass (3.2.9) lib/sass/tree/root_node.rb:20:in `render' sass (3.2.9) lib/sass/engine.rb:315:in `_render' sass (3.2.9) lib/sass/engine.rb:262:in `render' sass-rails (3.2.6) lib/sass/rails/template_handlers.rb:106:in `evaluate' tilt (1.4.1) lib/tilt/template.rb:103:in `render' sprockets (2.2.2) lib/sprockets/context.rb:193:in `block in evaluate' sprockets (2.2.2) lib/sprockets/context.rb:190:in `each' sprockets (2.2.2) lib/sprockets/context.rb:190:in `evaluate' sprockets (2.2.2) lib/sprockets/processed_asset.rb:12:in `initialize' sprockets (2.2.2) lib/sprockets/base.rb:249:in `new' sprockets (2.2.2) lib/sprockets/base.rb:249:in `block in build_asset' sprockets (2.2.2) lib/sprockets/base.rb:270:in `circular_call_protection' sprockets (2.2.2) lib/sprockets/base.rb:248:in `build_asset' sprockets (2.2.2) lib/sprockets/index.rb:93:in `block in build_asset' sprockets (2.2.2) lib/sprockets/caching.rb:19:in `cache_asset' sprockets (2.2.2) lib/sprockets/index.rb:92:in `build_asset' sprockets (2.2.2) lib/sprockets/base.rb:169:in `find_asset' sprockets (2.2.2) lib/sprockets/index.rb:60:in `find_asset' sprockets (2.2.2) lib/sprockets/processed_asset.rb:111:in `block in resolve_dependencies' sprockets (2.2.2) lib/sprockets/processed_asset.rb:105:in `each' sprockets (2.2.2) lib/sprockets/processed_asset.rb:105:in `resolve_dependencies' sprockets (2.2.2) lib/sprockets/processed_asset.rb:97:in `build_required_assets' sprockets (2.2.2) lib/sprockets/processed_asset.rb:16:in `initialize' sprockets (2.2.2) lib/sprockets/base.rb:249:in `new' sprockets (2.2.2) lib/sprockets/base.rb:249:in `block in build_asset' sprockets (2.2.2) lib/sprockets/base.rb:270:in `circular_call_protection' sprockets (2.2.2) lib/sprockets/base.rb:248:in `build_asset' sprockets (2.2.2) lib/sprockets/index.rb:93:in `block in build_asset' sprockets (2.2.2) lib/sprockets/caching.rb:19:in `cache_asset' sprockets (2.2.2) lib/sprockets/index.rb:92:in `build_asset' sprockets (2.2.2) lib/sprockets/base.rb:169:in `find_asset' sprockets (2.2.2) lib/sprockets/index.rb:60:in `find_asset' sprockets (2.2.2) lib/sprockets/bundled_asset.rb:38:in `init_with' sprockets (2.2.2) lib/sprockets/asset.rb:24:in `from_hash' sprockets (2.2.2) lib/sprockets/caching.rb:15:in `cache_asset' sprockets (2.2.2) lib/sprockets/index.rb:92:in `build_asset' sprockets (2.2.2) lib/sprockets/base.rb:169:in `find_asset' sprockets (2.2.2) lib/sprockets/index.rb:60:in `find_asset' sprockets (2.2.2) lib/sprockets/environment.rb:78:in `find_asset' sprockets (2.2.2) lib/sprockets/base.rb:177:in `[]' actionpack (3.2.13) lib/sprockets/helpers/rails_helper.rb:126:in `asset_for' actionpack (3.2.13) lib/sprockets/helpers/rails_helper.rb:44:in `block in stylesheet_link_tag' actionpack (3.2.13) lib/sprockets/helpers/rails_helper.rb:43:in `collect' actionpack (3.2.13) lib/sprockets/helpers/rails_helper.rb:43:in `stylesheet_link_tag' app/views/layouts/application.html.erb:16:in `_app_views_layouts_application_html_erb___824639613_33845076' actionpack (3.2.13) lib/action_view/template.rb:145:in `block in render' activesupport (3.2.13) lib/active_support/notifications.rb:125:in `instrument' actionpack (3.2.13) lib/action_view/template.rb:143:in `render' actionpack (3.2.13) lib/action_view/renderer/template_renderer.rb:59:in `render_with_layout' actionpack (3.2.13) lib/action_view/renderer/template_renderer.rb:45:in `render_template' actionpack (3.2.13) lib/action_view/renderer/template_renderer.rb:18:in `render' actionpack (3.2.13) lib/action_view/renderer/renderer.rb:36:in `render_template' actionpack (3.2.13) lib/action_view/renderer/renderer.rb:17:in `render' actionpack (3.2.13) lib/abstract_controller/rendering.rb:110:in `_render_template' actionpack (3.2.13) lib/action_controller/metal/streaming.rb:225:in `_render_template' actionpack (3.2.13) lib/abstract_controller/rendering.rb:103:in `render_to_body' actionpack (3.2.13) lib/action_controller/metal/renderers.rb:28:in `render_to_body' actionpack (3.2.13) lib/action_controller/metal/compatibility.rb:50:in `render_to_body' actionpack (3.2.13) lib/abstract_controller/rendering.rb:88:in `render' actionpack (3.2.13) lib/action_controller/metal/rendering.rb:16:in `render' actionpack (3.2.13) lib/action_controller/metal/instrumentation.rb:40:in `block (2 levels) in render' activesupport (3.2.13) lib/active_support/core_ext/benchmark.rb:5:in `block in ms' C:/RailsInstaller/Ruby1.9.3/lib/ruby/1.9.1/benchmark.rb:295:in `realtime' activesupport (3.2.13) lib/active_support/core_ext/benchmark.rb:5:in `ms' actionpack (3.2.13) lib/action_controller/metal/instrumentation.rb:40:in `block in render' actionpack (3.2.13) lib/action_controller/metal/instrumentation.rb:83:in `cleanup_view_runtime' activerecord (3.2.13) lib/active_record/railties/controller_runtime.rb:24:in `cleanup_view_runtime' actionpack (3.2.13) lib/action_controller/metal/instrumentation.rb:39:in `render' actionpack (3.2.13) lib/action_controller/metal/implicit_render.rb:10:in `default_render' actionpack (3.2.13) lib/action_controller/metal/implicit_render.rb:5:in `send_action' actionpack (3.2.13) lib/abstract_controller/base.rb:167:in `process_action' actionpack (3.2.13) lib/action_controller/metal/rendering.rb:10:in `process_action' actionpack (3.2.13) lib/abstract_controller/callbacks.rb:18:in `block in process_action' activesupport (3.2.13) lib/active_support/callbacks.rb:414:in `_run__956028316__process_action__416811168__callbacks' activesupport (3.2.13) lib/active_support/callbacks.rb:405:in `__run_callback' activesupport (3.2.13) lib/active_support/callbacks.rb:385:in `_run_process_action_callbacks' activesupport (3.2.13) lib/active_support/callbacks.rb:81:in `run_callbacks' actionpack (3.2.13) lib/abstract_controller/callbacks.rb:17:in `process_action' actionpack (3.2.13) lib/action_controller/metal/rescue.rb:29:in `process_action' actionpack (3.2.13) lib/action_controller/metal/instrumentation.rb:30:in `block in process_action' activesupport (3.2.13) lib/active_support/notifications.rb:123:in `block in instrument' activesupport (3.2.13) lib/active_support/notifications/instrumenter.rb:20:in `instrument' activesupport (3.2.13) lib/active_support/notifications.rb:123:in `instrument' actionpack (3.2.13) lib/action_controller/metal/instrumentation.rb:29:in `process_action' actionpack (3.2.13) lib/action_controller/metal/params_wrapper.rb:207:in `process_action' activerecord (3.2.13) lib/active_record/railties/controller_runtime.rb:18:in `process_action' actionpack (3.2.13) lib/abstract_controller/base.rb:121:in `process' actionpack (3.2.13) lib/abstract_controller/rendering.rb:45:in `process' actionpack (3.2.13) lib/action_controller/metal.rb:203:in `dispatch' actionpack (3.2.13) lib/action_controller/metal/rack_delegation.rb:14:in `dispatch' actionpack (3.2.13) lib/action_controller/metal.rb:246:in `block in action' actionpack (3.2.13) lib/action_dispatch/routing/route_set.rb:73:in `call' actionpack (3.2.13) lib/action_dispatch/routing/route_set.rb:73:in `dispatch' actionpack (3.2.13) lib/action_dispatch/routing/route_set.rb:36:in `call' journey (1.0.4) lib/journey/router.rb:68:in `block in call' journey (1.0.4) lib/journey/router.rb:56:in `each' journey (1.0.4) lib/journey/router.rb:56:in `call' actionpack (3.2.13) lib/action_dispatch/routing/route_set.rb:612:in `call' actionpack (3.2.13) lib/action_dispatch/middleware/best_standards_support.rb:17:in `call' rack (1.4.5) lib/rack/etag.rb:23:in `call' rack (1.4.5) lib/rack/conditionalget.rb:25:in `call' actionpack (3.2.13) lib/action_dispatch/middleware/head.rb:14:in `call' actionpack (3.2.13) lib/action_dispatch/middleware/params_parser.rb:21:in `call' actionpack (3.2.13) lib/action_dispatch/middleware/flash.rb:242:in `call' rack (1.4.5) lib/rack/session/abstract/id.rb:210:in `context' rack (1.4.5) lib/rack/session/abstract/id.rb:205:in `call' actionpack (3.2.13) lib/action_dispatch/middleware/cookies.rb:341:in `call' activerecord (3.2.13) lib/active_record/query_cache.rb:64:in `call' activerecord (3.2.13) lib/active_record/connection_adapters/abstract/connection_pool.rb:479:in `call' actionpack (3.2.13) lib/action_dispatch/middleware/callbacks.rb:28:in `block in call' activesupport (3.2.13) lib/active_support/callbacks.rb:405:in `_run__360878605__call__248365880__callbacks' activesupport (3.2.13) lib/active_support/callbacks.rb:405:in `__run_callback' activesupport (3.2.13) lib/active_support/callbacks.rb:385:in `_run_call_callbacks' activesupport (3.2.13) lib/active_support/callbacks.rb:81:in `run_callbacks' actionpack (3.2.13) lib/action_dispatch/middleware/callbacks.rb:27:in `call' actionpack (3.2.13) lib/action_dispatch/middleware/reloader.rb:65:in `call' actionpack (3.2.13) lib/action_dispatch/middleware/remote_ip.rb:31:in `call' actionpack (3.2.13) lib/action_dispatch/middleware/debug_exceptions.rb:16:in `call' actionpack (3.2.13) lib/action_dispatch/middleware/show_exceptions.rb:56:in `call' railties (3.2.13) lib/rails/rack/logger.rb:32:in `call_app' railties (3.2.13) lib/rails/rack/logger.rb:16:in `block in call' activesupport (3.2.13) lib/active_support/tagged_logging.rb:22:in `tagged' railties (3.2.13) lib/rails/rack/logger.rb:16:in `call' actionpack (3.2.13) lib/action_dispatch/middleware/request_id.rb:22:in `call' rack (1.4.5) lib/rack/methodoverride.rb:21:in `call' rack (1.4.5) lib/rack/runtime.rb:17:in `call' activesupport (3.2.13) lib/active_support/cache/strategy/local_cache.rb:72:in `call' rack (1.4.5) lib/rack/lock.rb:15:in `call' actionpack (3.2.13) lib/action_dispatch/middleware/static.rb:63:in `call' railties (3.2.13) lib/rails/engine.rb:479:in `call' railties (3.2.13) lib/rails/application.rb:223:in `call' rack (1.4.5) lib/rack/content_length.rb:14:in `call' railties (3.2.13) lib/rails/rack/log_tailer.rb:17:in `call' rack (1.4.5) lib/rack/handler/webrick.rb:59:in `service' C:/RailsInstaller/Ruby1.9.3/lib/ruby/1.9.1/webrick/httpserver.rb:138:in `service' C:/RailsInstaller/Ruby1.9.3/lib/ruby/1.9.1/webrick/httpserver.rb:94:in `run' C:/RailsInstaller/Ruby1.9.3/lib/ruby/1.9.1/webrick/server.rb:191:in `block in start_thread'

  Read the article

• DirectAccess client can't connect

  - by odd parity

  I've set up a DirectAccess server on Windows Server 2012 at my workplace. I'm using a Windows 8 Enterprise client to connect to it. It works fine over a mobile connection, but it fails when connecting from home. I've ruled out the firewall/router as the culprit as the issues persist when connecting the laptop directly to the cable modem. I'm not sure where to begin to debug this, does anyone have any pointers? Both Teredo and IPHTTPS interfaces are up (although as the server is behind a NAT and we only have 1 public IP I understand that IPHTTPS is the only protocol that will be used). The IPHTTPS tunnel also seems to be connected: netsh interface httpstunnel show interfaces Interface IPHTTPSInterface (Group Policy) Parameters ------------------------------------------------------------ Role : client URL : https://redacted:443/IPHTTPS Last Error Code : 0x0 Interface Status : IPHTTPS interface active however the DirectAccess link can't be activated - get-daconnectionstatus cycles between Status : Error Substatus : CouldNotContactDirectAccessServer and Status : Error Substatus : RemoteNetworkAuthenticationFailure Any suggestions on how to attack this are appreciated!

  Read the article

• Name resolution for the name <name> timed out after none of the configured DNS servers responded.

  - by Paul Brown

  Installed Windows 7 (previously ran XP and Vista with no problems) a couple of weeks ago and I'm at least once a day getting the above error show up in the event logs and losing all internet connection. The only current way to resolve it is to reboot my cable modem. My ISP have been running diagnostics on it and tell me there is no problem whatsoever. I've configured my router (and PC on occasion) to point at OpenDNS - still occurs. I've had the PC directly connected to the modem - still occurs. If I can give more info that might of use please ask thanks Update: After moaning at my ISP for a couple of weeks (VirginMedia) they agreed to send me out a new cable modem ... and I've not had the issue since.

  Read the article

• Can't get the L2TP IPSEC up and running

  - by Maciej Swic

  i have an Ubuntu 11.10 (oneiric) server running on a ReadyNAS. Im planning to use this to accept ipsec+l2tp connections through a router. However, the connection is failing somewhere half through. Using Openswan IPsec U2.6.28/K3.0.0-12-generic and trying to connect with an iOS 5 iPhone 4S. This is how far i can get: auth.log: Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "PSK" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-NAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-noNAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "passthrough-for-non-l2tp" Jan 19 13:54:11 ubuntu pluto[1990]: listening for IKE messages Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying new style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying old style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo ::1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 2001:470:28:81:a00:27ff:* Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/etc/ipsec.secrets" Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/var/lib/openswan/ipsec.secrets.inc" Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [RFC 3947] method set to=109 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] method set to=110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [8f8d83826d246b6fc7a8a6a428c11de8] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [4d1e0e136deafa34c4f3ea9f02ec7285] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [80d0bb3def54565ee84645d4c85ce3ee] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [9909b64eed937c6573de52ace952fa6b] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [Dead Peer Detection] Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: responding to Main Mode from unknown peer 95.*.*.233 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R1: sent MR1, expecting MI2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R2: sent MR2, expecting MI3 Jan 19 14:05:03 ubuntu pluto[1990]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 95.*.*.233 port 500, complainant 95.*.*.233: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Router config UDP 500, 1701 and 4500 forwarded to 192.168.19.99 (Ubuntu server for ipsec). Ipsec passthrough enabled. /etc/ipsec.conf # /etc/ipsec.conf - Openswan IPsec configuration file # This file: /usr/share/doc/openswan/ipsec.conf-sample # # Manual: ipsec.conf.5 version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes #charonstart=yes #plutostart=yes protostack=netkey conn PSK authby=secret forceencaps=yes pfs=no auto=add keyingtries=3 dpdtimeout=60 dpdaction=clear rekey=no left=192.168.19.99 leftnexthop=192.168.19.1 leftprotoport=17/1701 right=%any rightprotoport=17/%any rightsubnet=vhost:%priv,%no dpddelay=10 #dpdtimeout=10 #dpdaction=clear include /etc/ipsec.d/l2tp-psk.conf /etc/ipsec.d/l2tp-psk.conf conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT # # PreSharedSecret needs to be specified in /etc/ipsec.secrets as # YourIPAddress %any: "sharedsecret" authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=192.168.19.99 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "0" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port, but propose "0" instead of their port. rightprotoport=17/%any dpddelay=10 dpdtimeout=10 dpdaction=clear conn passthrough-for-non-l2tp type=passthrough left=192.168.19.99 leftnexthop=192.168.19.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/ipsec.secrets include /var/lib/openswan/ipsec.secrets.inc %any %any: PSK "my-key" 192.168.19.99 %any: PSK "my-key" /etc/xl2tpd/xl2tpd.conf [global] debug network = yes debug tunnel = yes ipsec saref = no listen-addr = 192.168.19.99 [lns default] ip range = 192.168.19.201-192.168.19.220 local ip = 192.168.19.99 require chap = yes refuse chap = no refuse pap = no require authentication = no ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd pcp-accept-local ipcp-accept-remote noccp auth crtscts idle 1800 mtu 1410 mru 1410 defaultroute debug lock proxyarp connect-delay 5000 ipcp-accept-local /etc/ppp/chap-secrets # Secrets for authentication using CHAP # client server secret IP addresses maciekish * my-secret * * maciekish my-secret * I can't seem to find the problem. Other ipsec connections to other hosts work from the network im currently at.

  Read the article

• Cisco VPN Client connects but unable to ping or RDP

  - by bryanroth

  I'm a developer and don't have much networking expertise, so bare with me. I'm using the Cisco VPN Client 5.0.02.0090 to connect to my work's VPN that way I can RDP into my work computer. Once connected, I can't ping anything on the local network once connected to the VPN thus I am unable to access my work's network. This used to work about two weeks ago but abruptly stopped working today. However, I have the Cisco VPN Client installed on my laptop and I am able to ping and RDP into my work computer from there. Both my desktop and laptop computers are connected to the same router at home. I have tried the following so far: Rebooted my computer Reinstalled VPN client Updated NIC drivers Disabled firewall Opened up ports 500, 4500, and 10000 Any help would be much appreciated. Thanks!

  Read the article

• How to fix error with "class" when creating a dhcp split-scope on Windows 2008?

  - by Jonas Stensved

  I'm trying to split a dhcp scope between a existing domain controller TTP01 and the new DC TTP02 to provide failover. I'm using the the wizard in DHCP [my scope] Advanced Split-scope. In the final step I get an error saying: Migration of Scope Options on Added DHCP Server: Failed Error: 0x00004E4C - The class name being used is unknown or incorrect. I can't find anything that seems to be wrong with my Scope Options settings, they are: Option Name Vendor Value Class 003 Router Standard 192.168.137.1 None 006 DNS Server Standard 192.168.137.2 None 015 DNS Domain Name Standard ttp.local None 060 PXEClient Standard PXEClient None I can't find any information about this error except this msdn article when searching. How do make it work?

  Read the article

• Exchange 2007 Email Error 451 4.7.0 Timeout waiting for client input

  - by HK1

  Our SBS 2008 server with Exchange 2007 started rejecting some (most) emails starting about 3 or 4 days ago. The return failure message looks something like this: The error that the other server returned was: 451 451 4.7.0 Timeout waiting for client input (state 18) I've rebooted our Sonicwall TZ-210 router and that doesn't make any difference. I think this problem has something to do with MTU (packet size) but I don't understand why the problem just started now. We haven't made any changes to our network infrastructure for weeks. If I ping our SonicWall (DSL connection, bridge mode) forcing unfragmented packets, I start getting packet dropouts at packet size 1320 or so. Maybe this is completely normal, I'm not sure. I haven't tried rebooting the DSL modem yet because I'm not on site. That's one of the next things I'll try.

  Read the article

• Home networking problem between power line communication and Ethernet

  - by pixeline

  My network runs through the electrical wiring of the house and is organised as such: Groundfloor: an ADSL+network switch, using DHCP (address : 172.19.3.1) (Mac) PCs connected via an electrical adapter (model: D-Link DHP-200) (1 per PC) First Floor: 1 switch (8 ports) connected via an electrical adapter (model: D-Link DHP-200) (address unknown) 2 Mac PCs connected (via RJ45 network wires) to that router using DHCP The Problem On the first floor, file tranfers between PCs are fast and perfect. But if I try to transfer files from or to a computer on the ground floor, the speed is slow and eventually the transfer dies out. The Question So I suspect the 1st floor switch is creating some kind of barrier (firewall?) preventing external PCs from accessing the PCs it is connected to? Am I right and if so, how could I disable that barrier?

  Read the article

• Tunnel into Sonicwall VPN while on Sonicwall wifi?

  - by Patrick Harrington

  Hey all, I am able to hit my company's VPN while I am at home using a dedicated IP with no issue. When I am at work, the VPN we use (a Sonicwall router/VPN/wifi access point), I can get outside internet fine, but am unable to connect to the VPN. I know that the wifi puts me on a different subnet, and when I try to connect to the normal VPN IP it won't work, and a traceroute just times out. Any suggestions? Might there be an internal IP I need to hit while here at work?

  Read the article

• Mac Mini Wake on Lan

  - by ILMV

  My Mac Mini has a setting in the Energy Saver category called Wake for Ethernet network access. Now the way I read this option is that any network access to the Mac whilst it is asleep will wake it up, but it doesn't. I have read that I have to send it the magic packet to wake it up, but what I really want to do is be able to simply attempt to access the Mini over the network and it wake up on demand without sending a magic packet. Can this be done? If it helps I am using a Netgear router.

  Read the article

• Openswan + xl2tpd connections time out after a while

  - by Halfgaar

  I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

  Read the article

• Sonicwall SSL VPN: Unable to reconnect once connection drops

  - by Jeffrey Hantin

  One of my users is having problems with his NetExtender connection. After installing NetExtender from the portal, it connects fine -- ONCE. After that, attempting to reconnect gives Verifying user...authentication fail! and the log on the router shows: [timestamp] | Info | SSLVPN | Auth Failed: No user name in http request (message id: 1079) This seems odd to me because the user name, password and domain are entered on the NetExtender client. After this error occurs, the only way to connect again is to uninstall, reboot, and reinstall NetExtender. He can connect fine to the Sonicwall SSLVPN demo site, and a different user can connect fine to this site from a different PC. Any clues?

  Read the article

• Cannot Connect to internet in windows 7 (No Internet Connection)

  - by user22062

  I have an airport express and Win 7 pro. My router is a Trendnet TEW-423PI G. The problem is everytime i try to connect it says it is unsuccessful and can't find ip address. I have tried everything. WPA2, WPA, WEP, Messing with the registry, Manually Inputting the ip address, Reinstalling drivers. I have two Macs that connect perfectly and are both running Snow Leopard that is why I am able to post this. What Should I do. I'm Going Crazy

  Read the article

• How to Route Traffic in Case PPTP Remote Client is on Same Subnet as Server

  - by Marcus Cole

  I've a PPTP server setup on my local home network (192.168.1.0/24, pfSense). Now sometimes when I'm away and want to connect remotely my client (Windows 7) is also on the same network because e.g. the hotel has set it up the same way. Thus the connection works, but I can't reach any PC on my home network because everything is routed directly to the client local router which is in the same subnet. Is there a way to work around this by messing with a configuration or adapting Windows routing table, i.e. without modifying either network?

  Read the article

• Port Forwarding on 80 vs. 8080

  - by Chadworthington

  I am able to access this url (Don't bother clicking on it, it's just an example): http://my.url.com/ This web site works: http://localhost:8080/tfs/web/ I setup my router to forward port 80 to the PC hosting the web site. I also forward port 8080 to the same box. But when I try to access this url I get the eror "Page Cannot be displayed:" http://my.url.com:8080/tfs/web/ I fwded port 8080 the same way I fwded port 80. I also turned off Windows Firewall, in case it was blocking port 8080. Any theories why port 80 works but 8080 does not?

  Read the article

• Dynamic DNS at freedns.afraid.org using a Fritz!Box

  - by kai

  I am having some trouble setting up Dynamic DNS with my Fritz!Box 7360. I have set up the Dynamic DNS page with (this is translated from German, so might be worded a bit differently): [x] Use dynamic DNS Dynamic DNS Provider: User defined Update-URL: https://freedns.afraid.org/dynamic/update.php?MY-DIRECT-URL-KEY Domain Name: mydomain.crabdance.com User Name: myusername Password: mypassword Now on the FritzBox status page, it says: Dynamic DNS: activated, mydomain.crabdance.com, Status: Account temprarily deactivated When I check back on http://freedns.afraid.org, my IP address never changes. Is there any way to fix this? Note my router is on an IPv6 network (m-net), with IPv4 only through DS-Lite. I'm not sure whether this affects anything. Update: Following the guide here (putting myusername instead of MY-DIRECT-URL-KEY) hasn't given any succes. However, the status field has changed slightly: Dynamic DNS: activated, mydomain.crabdance.com, Status: unknown

  Read the article

• Problems with wireless file copy - hangs during copy

  - by Eran Kampf

  I have this problem on my home network where when I try to copy files via wireless connection, at some point the copy fails and the machine doing the copy loses connection to the network. I'm pretty much lost as to figuring out the source for the problem... Some more details that might help: It's not OS related. I have Windows 7 machines and Leopard machines and this occurs on both I'm using a 3com OfficeConnect router Wired transfer works fine Other programs that require heavy wireless traffic work just fine:streaming large HD movies, Xbox Live! ... I'm lost as to how to even begin trying to diagnose the problem so any tips are welcome...

  Read the article

• OpenVPN slow with Firewall enabled on Zyxel ZyWall USG-100

  - by aleroot

  I have an OpenVPN server on a Linux machine, after installing a ZyWall USG-100 I'm experiencing extremely slowness navigating web servers on my remote LAN through the VPN connection, while accessing the web interface of the ZyWall is fast. I have configured everything : the Virtual Server for the OpenVPN Server, the static route as with the replaced router that I had before installing the ZyWall Today. I even added a rule to the firewall that allows connection to the OpenVPN Server machine : but navigation on the LAN through the VPN still slow, it seems that the Firewall is blocking packages, since if I disable the firewall on the USG-100 everything works fast as usual, while with the firewall enabled it is extremely slow. Why ? Do I need to add some other rule to the firewall to speed up ?

  Read the article

• WAMP, DD-WRT, Using DNSMasq to access multiple virtual hosts via aliases on local network

  - by christian

  I've updated my question to coincide with my progress I am attempting to configure WAMP on my development machine. I would like to use it in conjunction with DD-WRT's DNSMasq feature to access multiple virtual hosts via aliases (dev1.local,dev2.local,etc.) over my local wireless network. I have followed the following tutorial which allows me to setup virtual hosts and access on local network by ip addresses. http://www.logicspot.com/web-development-2/viewing-a-locally-hosted-website-with-your-smartphone/ I've got this up and running. For simplicity sake I'd still like to setup DNSMasq to connect via aliases. I have followed the following tutorial http://www.question-defense.com/2008/12/29/add-static-dns-entries-to-dd-wrt-router-firmware And the aliases load on my development machine, but I can not access via the aliases on my mobile devices connected to the local network. I can however access via IPs. Thanks for any help you can provide

  Read the article

• What are industry standards and professional best practices in network hosts naming? [closed]

  - by Ivan

  Possible Duplicate: Naming convention for computers It seems an important and difficult dilemma for me how to name network hosts (routers, servers (while a server can be a router and host diverse services at the same time), virtual machines (while they host important services and can migrate), workstations and notebooks (using pc-username is not the best idea as users may change), printers & MFUs, surveillance IP cameras, etc). Are there known and accepted best practices for this task? Excuse me if there already was a similar question here (I think it probably was), I haven't found it.

  Read the article

• Mac OS X: How do I disable SSID Broadcasting with Internet Sharing over Airport?

  - by Jack Chu

  I'm currently using Internet Sharing from my Ethernet over Airport on my Macbook Pro, however I don't want my SSID broadcasted†. There doesn't seem to be an option in Sharing/System Preferences to hide my ssid or prevent broadcasting. Any ideas? † My parent's restaurant has a wifi router, but it's on the roof level where the cable was installed. The signal it gets is weak, but works for the macbook. Their iPhones and 802.11G based computers can't get the wifi connection, maybe 802.11N on the macbook gets better penetration. I figure they could use the airport sharing from the laptop. For a restaurant type setting I don't think having WPA or WPA2 is super important. There's nothing sensitive or insecure on the network, so I figure hiding the SSID would be good enough for their purposes. It's not even active 100% of the time.

  Read the article

• Unidentified Connection in Compaq CQ61Windows7 OS on DSL cable network connection

  - by Mohammed Thouseef

  I have Dell studio with shared DSL internet connection my router is "NETGEAR DG834" & Network connection discription is "Broadcom netlink tm gigabit ethernet" this connection is working fine with dell laptop with Vista homepremium OS. My Question is? If i connect HPcompaq presario CQ61 in this connection it will automatically select Public network and display unidentified connection i tried several times but not suceeded its OS is Win7 home premium. but wireless networking is working fine only this problem is faceing with DSL cable connection when i diagnos the connection an error will generate "Local Area Connection does not have a valid IP configuration" in LAN Connection status window i noticed IPV4 & IPV6 Connectivity is showing "No Network Access" please can you clarify whats the problem.

  Read the article

• VPN for a small organization

  - by user24091

  I am in charge of a small office network that has < 10 users. I want to be able to offer them access to the network from their home internet connections. At the moment we have a regular ADSL-router-firewall to provide local network access and a fixed IP address. I know there are enterprise-level VPN solutions, but these obviously won't be available to us because of the cost and complexity. What small-scale solutions are around that you could recommend, what would we need to deploy on the client side, and what would the clients need to do to access the VPN? Simplicity and low cost need to be the keys here. Thanks

  Read the article

• Loadbalancing outbound traffic while using openbgpd on freebsd

  - by Rajkumar S

  Hi, I am using openbgpd in freeBSD with 2 ISP connections. I have my own AS number and a /22 network. Currently I am advertising entire /22 to both networks. Inbound traffic comes in But my outbound traffic goes via a single link. I would like to either distribute my outbound traffic via both links so that outbound traffic is also load balanced. How to configure this using openbgpd in freebsd? My current openbgpd config is attached for reference. AS 00my-as listen on xx.xx.xx.x router-id xx.xx.xx.x network aa.aa.aa.0/22 group "ISP1" { remote-as 11remoteas-1 neighbor bb.bb.bb.1 { descr "ISP1" announce all } } group "ISP2" { remote-as 22remoteas-2 neighbor cc.cc.cc.37 { descr "ISP2" announce all } } deny from any deny to any allow from bb.bb.bb.1 allow to bb.bb.bb.1 allow from cc.cc.cc.37 allow to cc.cc.cc.37

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >