Search Results

Search found 4161 results on 167 pages for 'desmond lost'.

Page 115/167 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

  • Windows 8 Doesn't Shutdown Properly With Fast Start-Up Enabled

    - by Patrick
    While Fast start-up is enabled, on turning the computer off (shutdown) the computer idles for about 5min after logging out/screen turning off. It then turns off. On returning into Windows I receive the error message saying Windows didn't shut down properly. Hibernate works fine, and I am told this shouldn't be the case - If one doesn't work, neither should. It works when both Fast start-up is enabled and disabled, as does restart and sleep. Windows is installed under UEFI. The UEFI ultra fast boot option for my motherboard cannot be enabled as my GPU doesn't support some UEFI GOP tech. As far as I know, not related to windows fast start-up, but thought it was worth mentioning. To clarify, if this: http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html is enabled, the computer does not shut down properly. EDIT: Some more information on the matter: Formatting didn't fix the issue. Still fails regardless of drivers installed. Hardware was purchased ~6months ago. Running a good SSD. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Upon installing WPT as suggested below to figure out what was happening during shutdown, and running the cmd xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP Windows fast start-up is now working consistently. Still works upon uninstalling WPT. This is the only change to occur on the computer. Nothing else has bee installed/uninstalled, no Windows Updates, nothing. Windows fast start-up did not work prior to installing WPT and running the cmd (made sure I tested).

    Read the article

  • Is there a POSIX pathname that can't name a file?

    - by Charles Stewart
    Are there any legal paths in POSIX that cannot be associated with a file, regular or irregular? That is, for which test -e "$LEGITIMATEPOSIXPATHNAME" cannot succeed? Clarification #1: pathnames By "legal paths in POSIX", I mean ones that POSIX says are allowed, not ones that POSIX doesn't explicitly forbid. I've looked this up, and the are POSIX specification calls them character strings that: Use only characters from the portable filename character set [a-zA-Z0-9._-] (cf. http://www.opengroup.org/onlinepubs/009695399/basedefs/xbd_chap03.html#tag_03_276); Do not begin with -; and Have length between 1 and NAME_MAX, a number unspecified for POSIX that is not less than 14. POSIX also allows that filesystems will probably be more relaxed than this, but it forbids the characters NUL and / from appearing in filenames. Note that such a paradigmatically UNIX filename as lost+found isn't FPF, according to this def. There's another constant PATH_MAX, whose use needs no further explanation. The ideal answer will use FPFs, but I'm interested in any example with filenames that POSIX doesn't expressly forbid. Clarification #2: impossibility Obviously, pathnames normally could be bound to a file. But UNIX semantics will tell you that there are special places that couldn't normally have arbitrary files created, like in the /dev directory. Are any such special places stipulated in POSIX? That is what the question is getting after.

    Read the article

  • Guest can't access host windows network share

    - by Asteroza
    HI folks, I've recently run into a strange problem after upgrading to VMware player 3. Certain virtual machines (currently an XP and a VIsta VM) seem to have lost the ability to access the host (XP) network shared folders (SMB). Both VM machines are bridged networking, firewall is up. Host firewall is up. Host and guests use DHCP. All OS are workgroup connected. The Vista VM I am not completely sure, but the XP VM did have access to the host's network shared folders after the player upgrade. Then today it wouldn't work, network path can't be found. Now here's the wierd part. The host's network shared folders can be accessed properly by other PC's on the network (and as far as I know, no settings have been changed). The host is pingable from the guests, and name resolution works. The guests can access network shares on other PC's in the network, and access the internet. My Network Places shows the host PC, but double clicking on it takes a long time before it finally times out with an error. Doing a wireshark packet capture, the guest is sending out the protocol negotiation, and the host is sending a response, but after that the guest behaves like it didn't receive anything and is doing TCP retransmissions. Anybody have any idea what could be wrong? Yes I know I can drag and drop files or setup the special VMware shared folders, but I want to access the host just like any other network accessible shared folder. It just seems really odd when any other computer works, just not between the guest and host.

    Read the article

  • Network card very slow, only on Windows

    - by J Penguin
    This only happens to 1 of my machine, and only when booting into Windows 7. No matter what network card I put in, Windows would default its mode to 10Mbps full duplex. Transfer speed is approximately 1 MB/s. If I set it to 100Mbps, the transfer drops to 100-200K/s. If I set it to 1000Mbps, the connection is lost completely. I've tried swapping in different cards, both PCI-E and PCI. I'v etried update the windows, I've tried reinstalling the drivers... On this very same machine, if I boot into Fedora, it can use the card at its full capacity 1000Mbps transfering 80+ MB/s And all the cards work just fine when plugging into other machines on the same network. I'm very curious. What could be the reason for this? The only different software that this machine has is virtual box with a VPN emulator, but disabling that VPN doesn't seem to do anything. I would like to get this fixed, hopefully, without reinstalling windows _< Will that be possible?

    Read the article

  • What is /etc/apache2/sites-available used for and is it necessary?

    - by Mariane
    I have 3 sites, each with a specific IP, running on apache2 (up-to-date Ubuntu). To put a site online, I just created a file in: /etc/apache2/sites-enabled and in this file I told apache which directory was the root directory for this site, and to which IP it should correspond. So I have 000-default 001-www.lapf.eu 002-www.felkin.info 003-www.seidhr.fr in this directory. My first site, lapf suddenly lost contact with its database after the domain name was transferred from another registrar unto the registrar who is also hosting the site's data. Then I did an update, and I reinstalled mysql-server and mysql-common, and I did I-have-forgotten-what to reinstall the locales (uft8 and such) which had vanished for some reason. This fixed my first site. Now I noticed that the other 2 sites are offline. Pointing a browser to them just hangs until timeout. They used to function, and their domain names did not move, they are still registered at the same place. The files are still in /etc/apache2/sites-enabled I noticed another directory: /etc/apache2/sites-available with just defaut and default.ssl in it. Why are there 2 directories, sites-enabled and sites-available? Should I copy the files from "sites-enabled" into "sites-available"? Or should I put a modified version of each in "sites-available"? command: "apache2ctl -S" VirtualHost configuration: 92.243.20.169:80 Charlotte (/etc/apache2/sites-enabled/001-www.lapf.eu:1) 92.243.21.141:80 xvm-21-141.ghst.net (/etc/apache2/sites-enabled/002-www.felkin.info:1) 92.243.4.114:80 xvm-4-114.ghst.net (/etc/apache2/sites-enabled/003-www.seidhr.fr:1) wildcard NameVirtualHosts and default servers: *:80 is a NameVirtualHost default server Charlotte (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost Charlotte (/etc/apache2/sites-enabled/000-default:1) Syntax OK

    Read the article

  • few basic questions on webhosting (namservers & dns records)

    - by claws
    I bought a domain name on name.com & I want to use free webhosting on 110mb.com By default name.com integrates services of Google apps. Name server entries are ns1.name.com ns2.name.com ns3.name.com ns4.name.com When I registered on 110mb.com it gave me two addresses ns1.110mb.com ns2.110mb.com This is where I'm lost. The concept is that "Domain name should point to an address of the server where the website is hosted" right? Then why are these 4 entires by default. How exactly is it working? should I remove these 4 and then add 110mb.com servers or just append 110mb.com server addresses to name.com ones. I would like to use google apps. If I change these name server addresses would that remove google apps? I especially want to use email service of google. And I really don't understand what is CNAME, MX, or something something. I want to learn about these stuff & how it exactly works. When I search for webhost tutorial. I'm unable to find any fruitful results.

    Read the article

  • My processor is running slower than usually it has to run

    - by Soham
    I've Core2Duo E7400 2.80GHz processor on my Intel D945gcnl mobo. From CPU-Z, I've get to know that my processor speed is 1596MHz with X6 multiplier and 266MHz Bus Speed on each core. Why my processor is being operated at 1596 MHz rather than 2.80GHz...!!???? From my side I've tried to disable SpeedStep from my bios by setting EIST to 'Disable' and also tried to change Power Option to 'High Performance' in Windows 7. And also done like suggested in this question:http://superuser.com/questions/119176/processor-not-running-at-max-speed But it gains me nothing. I've also tried to run few massive applications together to check whether it was increasing at that time or not, but it remains same. Should I have to increase my multiplier or overclock to gain that lost speed...??? Should I have to check my power supply for any problem..??? or anything else...??? Please help me on this.... And yeah I've desktop computer so no problem causing by battery. Here's my CPU-Z Screenshot: http://i56.tinypic.com/2lk4mqc.jpg

    Read the article

  • Monitoring whether Google Apps email address is reachable

    - by Acorn
    Backstory: I bungled things a bit the other day, and inadvertantly deleted the DNS overrides for my domain including the MX records that point to Google Apps, causing 2 days of lost emails. What I want: I want to be able to monitor the email address/account so that I can be alerted if for any reason something has gone wrong and emails aren't arriving. Thoughts: I was thinking there might be a way to test the email without having to send an actual message. Does this exist? This wouldn't help if the DNS has reset itself to a different mailserver would it? The other idea was sending periodic emails to check the address it working. How would you automate this? You'd need to somehow check that the email address had arrived as well as checking if it had bounced. Are there any scripts that exist that would do something like this? What would be the best method? Maybe a combination of checking that the MX records for the domain are set to what they're supposed to be set to, and sending automatic test emails to check that things are still functioning on the Google Apps end?

    Read the article

  • Ubuntu Laptop as a wireless hotspot on bridge mode

    - by nixnotwin
    I have a wired router to which my ubuntu laptop connects via ethernet. The wierless NIC of the laptop acts as a wireless hotspot on master mode. I use hostapd fo this. I have bridged eth0 and wlan0, so my wireless clients that connect to my laptop over wifi get ip from the wired router via dhcp, so the devices get registered at the wired router ( and the laptop is just an access point). I use the following commands to get my laptop+accesspoint working: sudo brctl addbr br0 sudo brctl addif br0 eth0 sudo hostapd /etc/hostapd/hostapd.conf & sudo dhclient -d br0 & sudo ifconfig wlan0 192.168.1.15 netmask 255.255.255.0 up sudo brctl addif br0 wlan0 These commands enable me to access internet on my wireless clients and also on the laptop which is acting as wireless accesspoint. But if I reboot the wired router (without rebooting the laptop that is acting as accesspoint), Internet access on the laptop+accesspoint gets lost, but on wireless clients it works fine. Even I have not been able to figure out a command which will reset the laptop interfaces to default settings, so everytime the router reboots, I have to reboot the laptop too to get into default settings so that I can re-enter the above mentioned commands. My first question is How can I have my bridge+accesspoint up and running even-though the router reboots? And is there a command to set the interfaces to a default state? (ifdown -a doesn't work, after issuing the command the bridge still remained).

    Read the article

  • Ubuntu Laptop as a wireless hotspot on bridge mode

    - by nixnotwin
    I have a wired router to which my ubuntu laptop connects via ethernet. The wierless NIC of the laptop acts as a wireless hotspot on master mode. I use hostapd fo this. I have bridged eth0 and wlan0, so my wireless clients that connect to my laptop over wifi get ip from the wired router via dhcp, so the devices get registered at the wired router ( and the laptop is just an access point). I use the following commands to get my laptop+accesspoint working: sudo brctl addbr br0 sudo brctl addif br0 eth0 sudo hostapd /etc/hostapd/hostapd.conf & sudo dhclient -d br0 & sudo ifconfig wlan0 192.168.1.15 netmask 255.255.255.0 up sudo brctl addif br0 wlan0 These commands enable me to access internet on my wireless clients and also on the laptop which is acting as wireless accesspoint. But if I reboot the wired router (without rebooting the laptop that is acting as accesspoint), Internet access on the laptop+accesspoint gets lost, but on wireless clients it works fine. Even I have not been able to figure out a command which will reset the laptop interfaces to default settings, so everytime the router reboots, I have to reboot the laptop too to get into default settings so that I can re-enter the above mentioned commands. My first question is How can I have my bridge+accesspoint up and running even-though the router reboots? And is there a command to set the interfaces to a default state? (ifdown -a doesn't work, after issuing the command the bridge still remained).

    Read the article

  • How to configure networking on an appliance such that it can plug and play on any corporate network?

    - by Joshua Lim
    I had a chance to configure a Moxa NPort device server appliance on my client's network, it was very easy to do so, done in just 2 minutes. Here's what I did:- The Moxa device server had a preset IP address of 192.168.127.254 and subnet mask 255.255.255.0 - http://www.moxa.com/doc/manual/nport/5400/NPort_5400_Series_Users_Manual_v4.pdf Moxa provides a Windows software which I used to "scan" for the device server. It worked like magic! The software returns a list of device servers found. Each device server is identified by MAC address, and by selecting the device server using the software, I can reset the default IP address and subnet mask of that device server! In comparison, during an earlier project, I spent 2 hours trying to get KVM to work for a Windows 7 embedded appliance I'm trying to install in my client's network - http://superuser.com/questions/380305/how-to-configure-windows-7-professional-appliance-pc-on-my-clients-network-usin Prior to that, I have already tried pre-configuring the IP address and subnet mask to the one which my client provided, yet the appliance still can't connect to the client's network! I've also tried cross cable, didn't work either. After KVM worked, I discovered that the network settings were "lost" after I plug the machine into the client's network. Now my question is what can I do to setup my Windows 7 embedded appliance so that it can connect to any network like that the Moxa device server? I tried experimenting this on my network using a Windows machine configured to an IP address of 192.168.127.254 and subnet mask 255.255.255.0, but it doesn't connect to my network that uses 192.168.0.*. :( EDIT: I would like to point out that the Moxa Windows configuration software seems to be able to connect to any Moxa device connected to the network even if it is on a different subnet, as long as the network adapter shows "connected". This is important because the Moxa device has no VGSM port or interface to configure the IP address.

    Read the article

  • MSSQL error: consistency-based I/O error - can it be caused by an MSSQL or OS problem?

    - by Philipp Keller
    This is what I saw in the windows error log: SQL Server detected a logical consistency-based I/O error: incorrect checksum (expected: 0x19fedd20; actual: 0x19fed5e3). It occurred during a read of page (1:1764) in database ID 6 at offset 0x00000000dc8000 in file 'D:\mssql\local_repository_pbdiffimport.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. I ran dbcc checkdb which told me I should restore with option REPAIR_ALLOW_DATA_LOSS, so I eventually ran DBCC CHECKDB (my_db_name, REPAIR_ALLOW_DATA_LOSS) WITH NO_INFOMSGS But that resulted in about 2'000 rows being lost. I restored a backup but now I'm afraid this will happen again since we already had a consistency problem in the same database about 2 weeks ago but then it happened in an index (recreated indexes solved the problem). We have investigated the discs - RAID5 looks good, no errors, and also none of the disc-check-utilities have revealed any hardware problem. Can this be caused by OS (Windows Server 2003) or by MSSQL (MSSQL Server 2005)?

    Read the article

  • Create a partition table on a hardware RAID1 drive with [c]fdisk

    - by Lev Levitsky
    My question is, is there a reason for this not to work? Details: I have two 500 Gb drives, and my motherboard RAID support, so I created a RAID1 array and booted from a Linux live medium. I then listed the disks and, apart from the obvious /dev/sda, /dev/sdb, etc. there was /dev/md126 which, I figured, was the mirrored "virtual" drive. Its size was 475 Gb; I had seen that the size of the array would be smaller than 500 Gb when I was creating it, so no surprise there. I did cfdisk /dev/md126, created the necessary partitions and chose write. It's been about half an hour now, I think. It doesn't seem like it's ever going to finish. The only thing about cfdisk in dmesg is that it's "blocked for more than 120 seconds". Doing fdisk -l /dev/md126 in another terminal I see all three partitions I created and a note that "Partition 1 does not start on a physical sector boundary". The table is lost after reboot, though. I tried to partition /dev/sda individually, and it worked, the table was written in about a second. The "not on a physical sector boundary" message is there, too. EDIT: I tried fdisk on /dev/sda, then there were no messages about sector boundaries. After a reboot, I am able to use mkfs on /dev/dm126p1, etc. fdisk shows that /dev/md126 has the same partitions as /dev/sda (but /dev/sdb doesn't have any). But at some point ("writing superblock and filesystem accounting information") mkfs is also blocked. Using it on sda1 results in a "partition is used by the system" error. What can be the problem? EDIT 2: I booted a freshly updated system from a pendrive and was able to create partition table and filesystems on /dev/md126 without any apparent problems. Was it an issue with the support of the hardware? My MB is Asus P9X79.

    Read the article

  • SSH sometimes screws up connection when terminal overflows?

    - by SeveQ
    I've got a problem with SSH on a Debian Lenny based server (it's a vHost within a Xen environment, booted on a Xen kernel). I hope someone can help me with this. The SSH connection seems somehow getting screwed up frequently when the terminal overflows (new lines beyond the bottom of the terminal, usually forcing it to scroll). The connection gets lost but not regularly disconnected. It nearly always happens when I do the following: an existing SSH connection gets disconnected (regularly) I order putty to reestablish the connection login-prompt appears at the very bottom of the putty terminal window I enter my login-name, press the enter key I'm asked for the password, I enter it, press the enter key and BOOM! Nothing more happens. I have to reconnect again. So it is reproducable. I'm not totally sure if the connection crashes before or after I enter the password. Furthermore it also happens when there is much text to be displayed (for example when I compile something or do an ls -l on a directory with many entries). Using 'screen', however, helps to reduces the frequency of occurence but doesn't solve the problem completely. It's occurence is independent from which terminal software I use. I mostly use putty but it also happens with other clients. I certainly hope somebody can help me solving this problem. Thanks in advance! //edit: I've just made a Wireshark trace of the ssh connection and there is nothing, I repeat, nothing different between the working and the failing connection (at least aside from frame numbers, ports and times that obviously can't be equal). This leads me to the assumption that the error has to happen on the server's side.

    Read the article

  • Sonicwall NSA 240, Configured for LAN and DMZ, X0 and X2 on same switch - ping issues

    - by Klaptrap
    Our Sonicwall vendor supplied and networked the NSA240 when we required a DMZ in our infrastructure. This was configured and appeared correct although VPN users periodically dropped DNS and Terminal Services. The vendor could not resolve and so the call was escalated to Sonicwall. The Sonicwall support engineer took a look and concluded that the X0 (LAN) and X2 (DMZ) intefaces were cabled to the same switch and so this is the issue. What he observed is a ping request to the LAN Domain Controller, from a connected VPN user, is forwarded (x0) from the VPN client IP to the DC IP but the ping response from the DC IP to the VPN client IP is on X2, a copy of the log is detailed below:- 02/02/2011 10:47:49.272 X1*(hc) X0 192.168.1.245 192.168.1.8 IP ICMP -- FORWARDED 02/02/2011 10:47:49.272 -- X0* 192.168.1.245 192.168.1.8 IP ICMP -- FORWARDED 02/02/2011 10:47:49.272 X2*(i) -- 192.168.1.8 192.168.1.245 IP ICMP -- Received X0 - LAN X1 - WAN X2 - DMZ The Sonicwall engineer concluded that we either need a seperate switch for X2 or we use a VLAN switch for both. I am the companies software engineer and we have yet to have heard back from the vendor, so I am lost at sea at the moment. Do we need to buy this additional equipment or is there another configuration on the NSA240 we can use?

    Read the article

  • Is timeout in tracertoutput an indication of an error?

    - by nitramk
    TCP/IP packages sent from my computer to a remote server does not always reach destination and ends up being retransmitted sometimes several times before they succeed. To troubleshoot this, I'm running a tracert to the server: Tracing route to <site> [<address>] Over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms mymachine 2 <1 ms <1 ms <1 ms gw.levonline.com [217.70.32.30] 3 <1 ms <1 ms <1 ms 81.201.213.218 4 <1 ms <1 ms <1 ms bmf1-hmf1.driften.net [81.201.213.12] 5 <1 ms <1 ms <1 ms 10ge-2-4-cr2.a1.sth.ownit.se [84.246.88.157] 6 <1 ms * <1 ms netnod-ix-ge-b-sth-4470.microsoft.com [195.69.11.181] 7 26 ms * * ge-3-0-0-0.ams-64cb-1a.ntwk.msn.net [207.46.42.1] 8 48 ms 57 ms 56 ms ten9-1.lts-76e-1.ntwk.msn.net [207.46.42.133] 9 * * * Request timed out. In step 6 and 7, I'm seeing timeouts while waiting for the reply from the server (as seen above). Running the same tracert many times gives varying output, sometimes the response is fine, but sometimes I get this timeout 1, 2 and sometimes for all 3 packets. The timeout always starts at the same server, netnod-ix-ge-b-sth-4470.microsoft.com. I've tried setting the tracert timeout to 10 seconds, but am still getting the timeout. Running tracert towards other servers does not give me the same timeout. Microsoft network technicians tells me that the problem is not on "their" side. Are these timeouts an indicator of a lost packet on the specific node which did not respond? Are the timeouts an indication of there being a problem, or is it normal?

    Read the article

  • All commands stopped working in centos 6.5

    - by Michael
    I have made a big mistake while removing some duplicate packages as it appears to be broken. yum 1036 rpm -e --nodeps glibc-2.12-1.132.el6_5.2.x86_64 1037 rpm -e --nodeps nscd-2.12-1.132.el6_5.2.x86_64 1038 rpm -e --nodeps glibc-common-2.12-1.132.el6_5.2.x86_64 1040 rpm -e --nodeps glibc-common-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6.x86_64 glibc-headers-2.12-1.132.el6.x86_64 1041 rpm -e glibc.x86_64 1042 rpm -e --nodeps glibc.x86_64 The issue happened after doing 1042 step. None of commands work(including yum, rpm, ls, cp etc) and getting error /lib64/ld-linux-x86-64.so.2: bad ELF interpreter: No such file or directory I thought that installing glibc after removing all the current ones would help to resolve the duplicate package error :( Now I realised that it is used as the C library in the GNU system and most systems with the Linux kernel. It defines the "system calls" and other basic facilities such as open, malloc, printf, exit, etc. Is there any possible solutions other than reinstall? I have lost ssh access. Maybe anything can be done using rescue cd? Thanks

    Read the article

  • Can a pool of memcache daemons be used to share sessions more efficiently?

    - by Tom
    We are moving from a 1 webserver setup to a two webserver setup and I need to start sharing PHP sessions between the two load balanced machines. We already have memcached installed (and started) and so I was pleasantly surprized that I could accomplish sharing sessions between the new servers by changing only 3 lines in the php.ini file (the session.save_handler and session.save_path): I replaced: session.save_handler = files with: session.save_handler = memcache Then on the master webserver I set the session.save_path to point to localhost: session.save_path="tcp://localhost:11211" and on the slave webserver I set the session.save_path to point to the master: session.save_path="tcp://192.168.0.1:11211" Job done, I tested it and it works. But... Obviously using memcache means the sessions are in RAM and will be lost if a machine is rebooted or the memcache daemon crashes - I'm a little concerned by this but I am a bit more worried about the network traffic between the two webservers (especially as we scale up) because whenever someone is load balanced to the slave webserver their sessions will be fetched across the network from the master webserver. I was wondering if I could define two save_paths so the machines look in their own session storage before using the network. For example: Master: session.save_path="tcp://localhost:11211, tcp://192.168.0.2:11211" Slave: session.save_path="tcp://localhost:11211, tcp://192.168.0.1:11211" Would this successfully share sessions across the servers AND help performance? i.e save network traffic 50% of the time. Or is this technique only for failovers (e.g. when one memcache daemon is unreachable)? Note: I'm not really asking specifically about memcache replication - more about whether the PHP memcache client can peak inside each memcache daemon in a pool, return a session if it finds one and only create a new session if it doesn't find one in all the stores. As I'm writing this I'm thinking I'm asking a bit much from PHP, lol... Assume: no sticky-sessions, round-robin load balancing, LAMP servers.

    Read the article

  • raid 0 data recovery?

    - by Fred
    HI All, I have two identical seagate 7200.9 500Gb drives confiured as a RAID 0 spanned disk in windows. One of the drives has lost power and wont spin up at all. I know this normally means death for the data on both drives but i have a cunning plan.. DISK 1 - NO POWER RAID 0 DISK DISK 2 - FULLY FUNCTIONAL RAID 0 DISK DISK 3 - FULLY FUNCTIONAL SPARE DISK Copy the working drive (disk 2) data to a third 500GB DISK (disk 3), remove the logic board from the working disk (disk 2) and replace it with the non working logic board on the broken drive (disk 1) , then hopefully recreate the RAID 0 with disk 1 and disk 3, just long enough to get the data off it. Hope this makes sense, here are my questions: Windows disk manager atm recognises disk 2 but wont let me access it in anyway, therefore copying the data off it (or getting a disk image) cant be done in windows. Does anyone know of any software (in linux or self booting) that would allow me to access this disk? Anyone know of any software that will recreate the spanned drive off two disk images Am i missing any key information that means i definitely shouldn't even bother starting this, i know its a long shot anyway but its worth a try unless i definitely cant do it. The irritating thing is that i am sure its a logic board failure on disk 1 as it simply wont power up at all, suddenly no signs of life, so i am sure the data is intact! Any help would be really appreciated! Thanks

    Read the article

  • Windows 7 restarts while being idle

    - by Ondrej Slinták
    My Windows 7 almost always restarts when I keep it idle for ~20-30mins. It happened randomly before, but lately, if I leave the computer I can be sure it's gonna restart after those 30mins. It never happens when I play games or work tho, just when it's idle. It's a fresh install of Windows 7 64bit. I had also problems while installing it, it always crashed while finalizing the install and I had to reinstall again. Eventually it installed on 3rd or 4th try after I deleted all of my partitions and added them again. I thought it might have been a hardware problem, but temperatures seem to be okay and I have no idea how to track what might have been causing it. Any ideas? I'm running Windows 7 64bit on: Gigabyte EX58-UD4P Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz NVIDIA GeForce GTX 260 6GB of DDR3 1066Mhz RAM WDC WD1001FALS-00J7B0 1TB SATA II I have a very bad feeling it might be something with HDD and its compatibility with Windows 7 as I haven't had those problems for 1 year while I had Vista. Edit: I checked Event Viewer critical errors from this night. PC restarted first time at 11:12pm, then at 3:06am and since then every ~20min until I came back to it. Error message is: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Source: Kernel-Power

    Read the article

  • Notebook Operating System with extreme support cycles/security updates

    - by leto
    Hello there, after reading the announcements about Mac OS X "Lion" and Apples political decision, I've had enough. I'm a longtime Apple User since 1992, have always felt at home there, but am trying to switch to alternative Operating System since a year. I've also been working with Unix machines since 2001, so I'm looking in one of the free Unices or a Linux. Since I last looked at the desktop in 2002 choke much has changed, it seems. So I'm lost once more in the war between desktop environments and software. To be honest: I don't care what it's name is, I want to get my job done. Here's what I set me as landmark for an operating system/software to be considered: Has to be atleast four years old Has to supply security updates for current release for atleast a year Production quality stability for the whole desktop environment (!) No f****g commercial stuff that tends to supply me with privacy invading App Store or Cloud space So far I'm running a MacBook from 2007, 4 Gig memory, 250 Gig disk and I need: IMAPs for Mail since 1995 Webbrowser sic Shell Keeping current with Updates/Upgrades with no more than 5 Minutes spent in entering commands (makes it hard for OpenBSD ;-) ) A desktop filemanger would be nice, but is a bonus. What can you suggest as operating system? The one with the longest support cycles and best chance to survive the next 10 years will win a new user, even sending patches when needed :-) Greets

    Read the article

  • Restricting Access to Application(s) on Point of Sale system

    - by BSchlinker
    I have a customer with two point of sale systems, a few workstations and a Windows 2003 SBS Server. The point of sale systems are typically running QuickBooks Point of Sale and are logged in with a user who has restricted permissions / access (via Group Policy). Occasionally, one of the managers needs to be able to run a few additional applications -- including some accounting software. I have created an additional user for this manager, allowing them to login and access the accounting software. The problem is, it can be problematic to switch users on the system, as QuickBooks takes a few minutes to close (on POSUser) and then reopen (on ManagerUser). If customers are waiting, this slows things down drastically. Since the accounting software is stored on a network drive, it would be easiest if the manager could simply double click something, authenticate against the network drive / domain controller and then the program would launch. When they close the program, the session to the network drive would be lost and the program would no longer be accessible. Is there any easy way to do this? Both users are on a domain and the system is Windows 7. I just don't want to require the user to switch back and forth. In a worst case scenario, they forget to switch back and leave the accounting software wide open.

    Read the article

  • MySQL partition "full"?

    - by gdea73
    I have a server that runs Debian 6.2, with Apache, PHP5, and MySQL. Well, I hadn't done anything with MySQL at all so far, just Apache and PHP; I must have installed it (mysql-server) at some point along the line, and I decided to login to the database for the first time a couple days ago as I was considering using the database for a future website project. I noticed that the "root" user had a password, and I didn't recall having set one. My usual root password was incorrect. So I attempted to reset the password. sudo service mysql stop (stopped successfully) sudo /usr/bin/mysqld_safe --skip-grant-tables --skip-networking & started successfully, from what I can tell. However, mysql itself returns "Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld,sock' (2)", and additionally sudo service mysql start returns "/etc/init.d/mysql: ERROR: The partition with /var/lib/mysql is too full! ... failed!" df -h tells me that / is 26% used, a 20GB partition, and /home, roughly 900GB, has only 5% usage. On a potentially related note, I've been experiencing random hangs since I noticed this problem, my tty2 randomly froze several times while idle, and the entire system is suddenly unstable. gnome-terminal also does not open. (Gnome-terminal apparently works now, disregard that part, but the server is still being somewhat unstable, I randomly lost connection when I was SSHed into it from my laptop, twice now.)

    Read the article

  • Centos/Postfix able to send mail but not receive it

    - by Dan Hastings
    I have set up postfix and used the mail command to test and an email was successfully sent and delivered. The email arrived in my yahoo inbox BUT the sender also recieved an email in the Maildir directory saying "I'm sorry to have to inform you that your message could not be delivered to one or more recipients", even though the message was delivered. I tried replying from yahoo to the email but it never arrived. I have 1 MX record added to godaddy which i did last week. Priority0 Host @ Points to mail.domain.com TTL1 Hour Postfix main.cf has the following added to it myhostname = mail.domain.com mydomain = domain.com myorigin = $mydomain inet_interfaces = all mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mynetworks = 192.168.0.0/24, 127.0.0.0/8 relay_domains = home_mailbox = Maildir/ I checked var/logs/maillog and found the following errors occuring postfix/anvil[18714]: statistics: max connection rate 1/60s for (smtp:unknown) at Jun 3 09:30:15 postfix/anvil[18714]: statistics: max connection count 1 for (smtp:unknown) at Jun 3 09:30:15 postfix/anvil[18714]: statistics: max cache size 1 at Jun 3 09:30:15 postfix/smtpd[18772]: connect from unknown[unknown] postfix/smtpd[18772]: lost connection after CONNECT from unknown[unknown] postfix/smtpd[18772]: disconnect from unknown[unknown] output of postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = domain.com myhostname = mail.domain.com mynetworks = 168.100.189.0/28, 127.0.0.0/8 myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relay_domains = sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550

    Read the article

  • How does it hurt to use Linux (Ubuntu) as a guest OS for all my tasks?

    - by sauparna
    I have a machine running Windows, where the disk has two partitions C (50 GB) and D (250GB). I do research in Information Retrieval and need to work with a large corpus (more than 50 GB) and in Linux. So if I want to install Linux on the existing system, keeping the Windows installation intact, will it be fine to run it in a virtual box? (say, QEMU, VMWare, etc.) An alternative is using Wubi. In that case the Linux installation has to be on drive C. Then, if I keep a small Linux installation (say 5GB) on C, and my corpus on D (mounted in Linux), how will it affect the performance of my programs which would be accessing the mounted Windows drive D. Is it feasible to use Linux this way? Which of the above is better if at all they are a way out? Note : Since my post in July 2010, I have been using and have tried several ways of maintaining a disk-image that I can mount in Linux. I had a 100GB qcow2 disk and a 100GB raw disk, both formatted to an EXT3 file system. I was mounting and connecting to the qcow2 disk using qemu-nbd. The problem was that every now and then, the connection to the disk would get lost and the running programs would throw disk I/O errors. The raw disk would mount and work fine as a loop mounted device, but when writing data to it, the mount.ntfs program would hog the CPU and the process would take an enormous amount of time. I was in fact running make on a piece of software located on this raw disk, and after a point of time make was waiting while mount.ntfs would show 100% CPU usage.

    Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >