Search Results

Search found 14157 results on 567 pages for 'drive failure'.

Page 115/567 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• Computer hanged in the middle of bios flashing process

  - by Stalker

  I have a laptop: Toshiba Satellite c660-17j, today I decided to update BIOS. I've downloaded bios updater from manufacturer's web site, and in the middle of flashing process computer hanged. I was waiting more than 30 minutes, but nothing was changed on the screen, i've tryed to PRESS MORE BUTTONS, but there were no reactions, so i've turned it off by removing battery (all other methods failed, even pressing power button for ~10 secs). After that computer can't start. I understand, that there's MESS in BIOS chip, and it's possible to re-flash it with hardware programmer, but I don't have it. I remember, that on some PCs (even on my eeepc) there was possibility to re-flash bios by inserting usb flash-disk (with .dat file on it, which contained BIOS), and power on PC, while holding some keys combination, then PC was switching to BIOS programming mode and re-flashed BIOS, after that it was possible to boot up normaly. Is there a way to recover computer without hardware programming BIOS chip? p.s. sorry for my english.

  Read the article

• I recently converted my ex HDD from FAT32 to NTFS. now my pc doesn't find or pick up my NTFS HDD

  - by Jason Haniball

  I recently converted my external hard drive from FAT32 to NTFS using the Command Prompt. Everything was working fine, I copied a 7GB file to it and everything worked. The next day I switched on my PC, I couldn't and still can't find my external 1.5TB hard drive by my computer. I have about 500 to 800 GB of data on it that I really don't want to lose. Its a Iomega Seagate Freeagent HDD. Has no switch, it switched on automatically, don't know if that helps.

  Read the article

• HP Pavillion dv6 laptop - 15 beeps on startup and a black screen?

  - by dunc

  Usual story - girlfriend's step-brother's laptop is broken. I don't know a huge amount about what occurred before it broke, but I do know the following: When you try to turn the laptop on, it beeps 15 times exactly. The screen remains black. The LED on the Caps Lock key flashes continuously. If left on, the laptop never boots - as far as I can see. If left on, on a stable surface with decent ventilation for a relatively short period of time, the laptop (below keyboard, but not where the RAM/HDD are) gets very hot. I've tried doing what most websites appear to recommend for similar problems, which is to disconnect AC and battery then hold the power button down for a minute before reconnecting the AC and trying to turn the laptop on - no difference. EDIT I've also tried re-seating the RAM, to no avail. Any ideas? Thanks in advance,

  Read the article

• WD: UDMA CRC Errors and Reallocated Sector

  - by Leo White

  I got a WD Caviar Black 1TB (WD1001FALS) and according to SMART, I got: one "Reallocated Sector" one "Reallocated Event" 26 UDMA CRC Errors in my drive but it's a "Pass" for the "SMART overall-health self assessment test". I think it's because of these, I'm having problems with Grub, and thus can't boot into any OS at all. Are these problems serious? According to "Warranty Services", my drive is still "In Limited Warranty". Would I be eligible for a replacement? FYI: I'm running Ubuntu 11.10. Any help will be appreciated. Thanks

  Read the article

• How to automount a Truecrypt volume before login in Windows 7?

  - by nonoitall

  I have an external hard drive containing all my documents, and it is encrypted with a password via Truecrypt. I'd like my desktop computer at home to automatically mount the volume prior to my logging in (so that it can be used as my user folder) without asking me for a password. (Yes, the password can be saved in plain text on my desktop's hard drive - that's okay.) For the life of me, I can't figure out a way to do this that actually works though. Tried using the Task Scheduler to schedule a mount when the computer starts up, and it works, but the volume is only accessible by my user account after I log in. (Haven't tried every combination of users/options for the scheduled task, so maybe there's something else there I need to try.) Also tried adding a startup script for my user account that runs on login, which evidently is too late to set up the user's profile folder. Anybody ever successfully achieve this or something like it?

  Read the article

• How to add password in a USB Stick?

  - by Shail

  Can anyone suggest a free and simple software application that adds a password to the Flash Drive?

  Read the article

• Can software operation damage an SD card?

  - by Borek

  My SD card has a broken boot sector and the tools I've tried say that it's not repairable (I've tried TestDisk, DriveRestore Pro and Easeus Partition Recovery). The card was in my Android phone and at one point, it simply shut down and I had to reboot it. After I rebooted it, the SD card was not recognized and since then I've tried to recover it (I don't want to format the card as it contains some data I'd like not to lose although it's nothing critical). My question is, can some software error in Android, or a sudden crash of a system, damage the SD card? Or was it the other way around, the card first died and it brought the system down?

  Read the article

• How much data does windows write on boot

  - by soandos

  This question was inspired by Bob's comment to my answer here. On boot, windows writes files to the hard drive (I imagine this to be the case, as it has a way of detecting if the boot was previously interrupted by a hard power-off, and I am sure many other things). But assuming that there is a "smooth" boot, where there are no error, etc, and no logon scripts that run, and things like that, about how much (a few KB, a few MB, a few GB) data gets written to the drive? For simplicity's sake, assume that: hibernation is turned off windows 7 pagefile is turned off (does this matter right at boot, or only later?) How could one go about measuring this? Are there resources that have this information?

  Read the article

• My monitor made a noise and is now dimmer - can I repair this myself?

  - by Ross

  I have a Samsung SyncMaster T190 LCD monitor which I've had for about 5 years. It hissed slightly then went dim (readable but the top half of the screen is less bright). I'm pretty sure that after 5 years of service it's just got to the point where something's burned out, so my question is can I repair this myself, or should I just get a new monitor. I'm currently a student so self repair would be a better option if cost effective.

  Read the article

• Notebook display not working properly

  - by jfcfar

  I have an old Acer TM4001 notebook. If the laptop is powered-off, with the lid closed, when I power it on, it generally works. Then, without touching anything, if I reboot the computer the internal display wil not work anymore. To make it working again I need to shut down the pc, close and reopen the lid and then turn it on. If I close and reopen the lid if it is not working after power the pc on, it won't work. When the screen is working, closing and opening it has no effect (the data cable seems ok). The external monitor always works as expected: If the internal display is not detected, the external will be the main (and only) display. This is not OS-related. When the screen is not working I cannot see the POST. What could be the cause for this?

  Read the article

• How do you monitor and react when some scheduled job fails? - general question

  - by Dzida

  Hi, In many projects my team faced problems with 'silent fails' of some important components. There are lot of tasks executed behind the scenes and if somethings fails (either by errors in logic or hardware problems) in most cases responsible person is not notified (or not notified instantly). I know about heavy-weight monitoring tools that could solve some of that problems but there over-complicated and too expensive for our team. I am interested what are your solutions for such problems.

  Read the article

• Acer Aspire 5532 crashes with no warning

  - by keenan

  I have an Acer Aspire 5532. I don't have more specs off the top of my head but from what I've looked up it has all the factory stock stuff in. My keyboard is completely shot and doesn't work at all. It was working fine for quite a while, however I go to get on it Thanksgiving night and all of a sudden it just crashes with no warning. I try to restart it and it beeps 3 times with about 15 seconds in between each beep. After that it will go to start up and get to the log in screen, and about 3 minutes later it will crash again with absolutely no warning. The same thing happens every time I try to start it up. I've taken it completely apart and cleaned the fan and all the airways. I made sure all the connections are good (or at least all the ones that I can get to above the mother board), put it back together and I get the same problem.

  Read the article

• When should I use SATA 6gb/s?

  - by Gili

  I purchased a Baraccuda hard-drive (model ST3000DM001) that supports a maximum read transfer rate of 210 MB/s and SATA 1.5/3/6 Gb/s. My motherboard has a limited number of 6 Gb/s ports so I'd like to reserve them for when it's really necessary. When does a hard-drive benefit from a SATA 6 Gb/s port? Doesn't it require a transfer speed of at least 375 MB/s to surpass the limit of SATA 3 Gb/s? Are there any other benefits of SATA 6 Gb/s vs 3 Gb/s ports?

  Read the article

• Windows update on netbook requires CD (hint, there's no CD drive)

  - by bwooceli

  An "Important" update for Microsoft Works (via Windows Update) on a Dell netbook gets about halfway through and then pops up with the super-awesome "Please insert Microsoft Works 9.0 disc" message. Of course, the netbook has no CD rom drive, there is no handy folder (that i can find) containing "Works9.msi", and I have no Works9 disc. It wouldn't be so bad, except the update keeps coming up everytime WU runs. Any suggestions?

  Read the article

• Survive a Software Audit

  - by rosepost1150

  I received a letter from Autodesk asking for a "License Assessment". I understand it as a software audit. They plan to do it remotely. The thing is, I'm a freelancer, I don't use any Software Asset Mangment software, and I just recently swap out my hard drive for a new one, and did a complete clean install, and then I received this request from Autodesk. There is almost nothing on my hard drive now. What do software auditors do when they experience this? Will they (are they allowed) to contact my clients (that info is all over the web..) to get information since they found nothing here?

  Read the article

• Asus ux31e zenbook SSD non-standard / cant upgrade hdd?

  - by FstaRocka

  I bought a ux31e asus zenbook, and the drive crashed last week. I just cancelled an mSata ssd order because I fear asus has used a non standard ssd!!! what a bunch of crooks, ive lost all my respect for this company! Can anyone confirm what and why? My SSD model is xm11 128gb - it looks like a ram chip and only has two tongues with 12 and 6 pins respectively. The drive I was about to order mSata had 8 where mine had 6 - i never bothered counting the rest. This article seems to confirm! UX31 UX21 Zenbook Article "It looks like SSD uses a non-standard format"

  Read the article

• Windows XP Map drive failed

  - by bajohns

  Greetings, I have a Windows Web Server 2008 VPS and two client machines. One is a Windows 7 box and the other XP. I configured one folder as a share on the 2008 box and attempted to mount it on each of the clients. The catch is it won't work with XP. Same username/password but I get Access granted on the Win 7 but for XP I get: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Any ideas? If this duplicates any other question please refer me but I cannot seem to find the answer.

  Read the article

• Automatically copy files to USB drive when connected

  - by Daphna

  I am looking for a solution for copying all the files from a specific directory on the hard drive, to a specific directory on a USB memory device, once this device is connected. I have a program that downloads podcast episodes for me. I would like these files to be automatically moved (or at least copied) to my mp3 player once I connect it to the computer. I have both windows xp and linux machines, so a solution for any of them will work for me.

  Read the article

• How does one dismantle the ThinkPad Mini Dock Series 3 (model 4337)?

  - by Whaa

  I have a ThinkPad Mini Dock Series 3 with a spring that is too stiff, causing problems with the connectivity when a computer is docked. I tried to open it so that I can soften the spring, but hit a brick wall. I removed all the screws I could find at the the bottom and the back panel of the docking station, but the bottom part of the plastic case would still not part from the top of the plastic case. I even looked under some of the various stickers for more screws, but found nothing. Can anyone please help with pointers on dismantling this docking station?

  Read the article

• Get extra hard drive space from windows 7

  - by abhinole

  I am using Ubuntu 12.04 and Windows 7 (dual-boot) on my laptop.For some reasons I want some more space in my Ubuntu partition.I have installed gParted in Ubuntu.Now is it recommended to get this required extra space from Windows 7 drive (*where my linux is installed *) directly using gParted? Will it cause damage to my boot loader or my data on the partition from where I wish to grab some space? Any help will be appreciated. Thanks in advance.

  Read the article

• Installed Ubuntu 11.10, getting hard disk health warnings

  - by Brad

  I'm getting hard disk health problem warnings... When I click the "examine" button the disk utility pops up. None of my drives are reporting any major issues, and the very first drive doesn't even have a SMART button. I don't really care if one of the drives is crashing, I've got everything backed up, but I just want to know how to stop these god forsaken message boxes from popping up randomly. I have already gone into the Disk Utility and checked "do not notify me if this drive is failing" on all of them except the one that doesn't have the SMART button. I've googled about as much as I can for one day.

  Read the article

• How to image an fresh hard drive

  - by JoelHess

  I'm looking for something that can drop an image of Windows onto an uninitialized Hard Drive. I have new units that haven't even had the partition table created on them, and I'm trying to come up with a one (or two) step process for getting a disk image onto them. I've tried clonezilla, but that doesn't seem to like the lack of partition table, and as far as I can tell, Acronis doesn't work either.

  Read the article

• recovering vm data from crashed XenServer install

  - by user58983

  We're using xenserver 5.6 from citrix to run our virtual machines. The box is old and creaky, and the hard drive went. (We had a super limited budget of $0 at the time). Turns out the only machine on there we actually needed, was the only one not backed up... anyway, we've replace the hard drive, and reinstalled xensever. however while trying to find our old vm disk images, i have no idea where they sit, and i'm beginning to think they're on a lvm partition? is there anyway to access the disk images from the old vm's on this hard disk, which is attached to the xenserver machine via a usb-sata converter?

  Read the article

• My PC suddenly reboots

  - by ChocoDeveloper

  Yesterday I opened my PC hub (after like, 5 years) to add more RAM and a new HDD. It was full of dust and balls of fluff, so I cleaned it a bit by blowing. I also removed the fan that was attached to the motherboard (I think it's there to cool the processor) and I cleaned it also by blowing and with a paintbrush, then put it back where it was (it had 4 weird plastic screws, it wasn't easy). Then I added 2 x 2Gib of RAM (Kingston 1333MHz), and the new HDD (Western Digital Caviar Blue 1TB SATA 3). I couldn't find another wire like the one my first disk had, which was thicker, but there was one that was more flat, so I plugged it and it worked fine (I also plugged the wire that I think is for the data, which looks like many little wires glued together). I'm running Ubuntu 12.04, and in the new disk I've just installed Windows 7. Between yesterday and today, two reboots ocurred while working on Ubuntu. I haven't used Windows 7 that much so I don't know if it will happen there too. So where can I begin to debug this?

  Read the article

• Would SSD drives benefit from a non-default allocation unit size?

  - by davebug

  The default allocation unit size recommended when formatting a drive in our current set-up is 4096 bytes. I understand the basics of the pros and cons of larger and smaller sizes (performance boost vs. space preservation) but it seems the benefits of a solid state drive (seek times massively lower than hard disks) may create a situation where a much smaller allocation size is not detrimental. Were this the case it would at least partially help to overcome the disadvantage of SSD (massively higher prices per GB). Is there a way to determine the 'cost' of smaller allocation sizes specifically related to seek times? Or are there any studies or articles recommending a change from the default based on this newer tech? (Assume the most average scattering of sizes program files, OS files, data, mp3s, text files, etc.)

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >