Search Results

Search found 5463 results on 219 pages for 'runtime'.

Page 115/219 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122 | Next Page >

Oh snap! My RPi was upgraded to 512MB! Woo-hoo!

- by hinkmond

I ordered a Raspberry Pi Model B (256MB) over 4 months ago on backorder. When it finally came I saw it was upgraded to the new half a gig model! Woot! But, all was not perfect. Gary C. told me the shipped configuration of the new RPi models didn't have the right firmware for 512MB, and I had to upgrade the start.elf in the /boot directory to recognize all of the 512MB RAM. I did a "free" command, and sure enough saw only 240MB. Sadness. But, Gary gave me a copy of his start.elf which worked after some trail and error. For anyone ordering the new RPi Model B w/512MB, here are the steps to get you going with full 512MB RAM: sudo apt-get update --fix-missing sudo apt-get upgrade --fix-missing # NOTE: This step takes at least a couple hours on a # fast network wget https://raw.github.com/raspberrypi/firmware/\ 164b0fe2b3b56081c7510df93bc1440aebe45f7e/boot/\ arm496_start.elf sudo mv /boot/start.elf /boot/orig-start.elf sudo mv arm496_start.elf /boot/start.elf sudo reboot free total used free shared buffers cached Mem: 497768 210596 287172 0 16892 169624 -/+ buffers/cache: 24080 473688 Swap: 102396 0 102396 So of course this means... (drumroll) there is now 498MB available for the Java Embedded heap! java -Xmx400m -version java version "1.7.0_06" Java(TM) SE Embedded Runtime Environment (build 1.7.0_06-b24, headless) Java HotSpot(TM) Embedded Client VM (build 23.2-b09, mixed mode) Yeah, baby! Hinkmond

Read the article
LOD in modern games

- by Firas Assaad

I'm currently working on my master's thesis about LOD and mesh simplification, and I've been reading many academic papers and articles about the subject. However, I can't find enough information about how LOD is being used in modern games. I know many games use some sort of dynamic LOD for terrain, but what about elsewhere? Level of Detail for 3D Graphics for example points out that discrete LOD (where artists prepare several models in advance) is widely used because of the performance overhead of continuous LOD. That book was published in 2002 however, and I'm wondering if things are different now. There has been some research in performing dynamic LOD using the geometry shader (this paper for example, with its implementation in ShaderX6), would that be used in a modern game? To summarize, my question is about the state of LOD in modern video games, what algorithms are used and why? In particular, is view dependent continuous simplification used or does the runtime overhead make using discrete models with proper blending and impostors a more attractive solution? If discrete models are used, is an algorithm used (e.g. vertex clustering) to generate them offline, do artists manually create the models, or perhaps a combination of both methods is used?

Read the article
Parameterized Django models

- by mgibsonbr

In principle, a single Django application can be reused in two or more projects, providing functionality relevent to both. That implies that the same database structure (tables and relations) will be re-created identically in different databases, and most times this is not a problem (assuming the projects/databases are unrelated - for instance when someone downloads a complete app to use in their own projects). Sometimes, however, the models must be "tweaked" a little to better fit the problem needs. This can be accomplished by forking the app, but I wondered if there wouldn't be a better option in cases where the app designer can anticipate the most common customizations. For instance, if I have a model that could relate to another as one-to-one or one-to-many, I could specify the unique property as a parameter, that can be specified in the project's settings: class This(models.Model): other = models.ForeignKey(Other, unique=settings.OTHER_TO_THIS) Or if a model can relate to many others, I could create an intermediate table for each of them (thus enforcing referential integrity) instead of using generic fks: for related in settings.MODELS_RELATED_TO_OTHER: model_name = '%s_Other' % related globals()[model_name] = type(model_name, (models.Model,) { me:models.ForeignKey(find_model_class(related)), other:models.ForeignKey(Other), # Some other properties all intersection tables must have }) Etc. Let me stress out that I'm not proposing to change the models at runtime nor anything like that; once the parameters were defined and syncdb called for the first time, those parameters are not to be changed again (unless you're doing a schema migration). Is this a good design? Are there better ways to accomplish the same thing, or maybe drawbacks I coulnd't anticipate? This technique is meant to be used sparingly (only on apps meant to be reused in wildly different contexts, and only when a specific need of customization can be detected while the app model is being designed).

Read the article
Banshee doesn't like opening websites

- by Allan

I have come across two bugs (which will be added to launchpad if it's not resolved here) When I open any of the websites in Banshee Amazon or Miro Guide as soon as the site is finished loading it crashes Banshee. If I play any video local or remote it will show 1 frame maybe 0.5 sec of video then I get a black screen and audio continues in the backgound. Specs & Details I have a Fujitsu Amilo 1718 laptop with 2 gig of ram (original 1 gig) graphics is provided by ATI Radeon Xpress 200M (don't laugh it works with compiz....just) I have a link to the output of banshee --debug Here Don't have time to read? Here are the Highlights [2 Warn 11:52:34.814] Caught an exception - System.ArgumentNullException: Argument cannot be null. then abit later Debug info from gdb: Could not attach to process. If your uid matches the uid of the target process, check the setting of /proc/sys/kernel/yama/ptrace_scope, or try again as the root user. For more details, see /etc/sysctl.d/10-ptrace.conf ptrace: Operation not permitted. ================================================================= Got a SIGSEGV while executing native code. This usually indicates a fatal error in the mono runtime or one of the native libraries used by your application. ================================================================= Aborted Not music to my ears as you can expect. The version I am using is 1.9.4 from the daily ppa but these bugs happen in any version of banshee from 1.8.1 and up. So if any one has come across a fix for this problem please share!! additional info Both VLC and Miro work on my system so there isn't a system wide problem with video and I haven't mentioned mono so no trolling it will get voted down.

Read the article
Sun Java crashing, mostly with jboss

- by Joel

I'm on Ubuntu 10.10. I keep having problems with Sun Java crashing on me. I mostly have it crashing on my Jboss server, but I've had it crash MANY MANY times running ANT tasks or the IntelliJ IDE. Here's what it prints: # # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007f67e665d440, pid=21260, tid=140082772170512 # # JRE version: 6.0_22-b04 # Java VM: Java HotSpot(TM) 64-Bit Server VM (17.1-b03 mixed mode linux-amd64 ) # Problematic frame: # V [libjvm.so+0x2f2440] # # An error report file with more information is saved as: # /home/blah/blah/blah/hs_err_pid21260.log # # If you would like to submit a bug report, please visit: # http://java.sun.com/webapps/bugreport/crash.jsp # Aborted A co-worker of mine who has the same version of Ubuntu has had the same problem, but has only happened to him once. (I get this probably 2 or 3 times a day, if not more). I have another machine running Ubuntu 10.04 with Sun Java and I have yet to see this problem. 1.0.6_20 is the java version on the 10.04 machine. My machine is running 1.6.0_22. Has anyone else had this problem? Anyone know how to keep it from happening? Also: I have tried reinstalling it and I can't use OpenJDK.

Read the article
Strategies for managing use of types in Python

- by dave

I'm a long time programmer in C# but have been coding in Python for the past year. One of the big hurdles for me was the lack of type definitions for variables and parameters. Whereas I totally get the idea of duck typing, I do find it frustrating that I can't tell the type of a variable just by looking at it. This is an issue when you look at someone else's code where they've used ambiguous names for method parameters (see edit below). In a few cases, I've added asserts to ensure parameters comply with an expected type but this goes against the whole duck typing thing. On some methods, I'll document the expected type of parameters (eg: list of user objects), but even this seems to go against the idea of just using an object and let the runtime deal with exceptions. What strategies do you use to avoid typing problems in Python? Edit: Example of the parameter naming issues: If our code base we have a task object (ORM object) and a task_obj object (higher level object that embeds a task). Needless to say, many methods accept a parameter named 'task'. The method might expect a task or a task_obj or some other construct such as a dictionary of task properties - it is not clear. It is them up to be to look at how that parameter is used in order to work out what the method expects.

Read the article
Dependency error while installing WINE

- by pgrytdal

Every time I try to install "WINE" VIA the Software Center on Ubuntu 12.10, I get this error: The following packages have unmet dependencies: wine1.4: PreDepends: dpkg (>= 1.15.7.2~) but 1.16.7ubuntu6 is to be installed Depends: libc6 (>= 2.14) but 2.15-0ubuntu20 is to be installed Depends: wine1.4-amd64 (= 1.4.1-0ubuntu1) but 1.4.1-0ubuntu1 is to be installed Depends: wine1.4-i386 (= 1.4.1-0ubuntu1) but it is not going to be installed When I try installing it VIA the terminal, this is what I get: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine1.4 : Depends: wine1.4-i386 (= 1.4.1-0ubuntu1) but it is not installable Recommends: gnome-exe-thumbnailer but it is not going to be installed or kde-runtime but it is not going to be installed Recommends: ttf-droid Recommends: ttf-mscorefonts-installer but it is not going to be installed Recommends: ttf-umefont but it is not going to be installed Recommends: ttf-unfonts-core but it is not going to be installed Recommends: winbind but it is not going to be installed Recommends: winetricks but it is not going to be installed E: Unable to correct problems, you have held broken packages. how do I fix this?

Read the article
Sprite sorting issues

- by TheBroodian

I apologize for the vague title, I'm not sure how else to phrase this problem. I am using tIDE to assist me in my game's world development. To give a dynamic effect to map layers within tIDE, it has events that can be wired up to draw sprites before or after the draw of layers, to create foreground or background effects during runtime. This all works fine and well, however, the only way that I understand that this works, is by calling tIDE's internal spritebatch to create this effect. This creates a problem for me, because within tIDE's source code, its spritebatch's call block is set to SpriteSortMode.Deferred, and my characters have particle elements that I would like to draw in front of and behind themselves, via a drawdepth value. I can use a separate instance of spritebatch and call my character's draw method, and set sprite sorting there, but then my character is drawn ontop of all layers in my tIDE map. Which is even worse to me than my particles not being drawn as I want them to be. So, in summary, I want all of my crap to work, but at the moment the only way I can figure to do that is to ghetto rig the spritebatch within my characters' draw methods by calling a spritebatch.End();, then starting a new call to Begin() with SpriteSortMode.BackToFront, doing all of my characters' draw logic, and then calling another spritebatch.End(); followed once again by a new spritebatch.Begin(). Obviously that is pretty undesirable, but I don't know any other feasible alternatives. Anybody got any wisdom they could impart unto me as to how I could handle this?

Read the article
Microsoft Press Deal of the Day 11/Oct/2012 - CLR via C#, 3rd Edition

- by TATWORTH

Today's Deal of the Day from Microsoft Press at http://shop.oreilly.com/product/9780735627048.do?code=MSDEAL is CLR via C#, 3rd EditionThe deal expires probably 23:59 PT, today 11/Oct/2012. Remember to use the code MSDEAL at checkout."Dig deep and master the intricacies of the common language runtime (CLR) and the .NET Framework 4.0. Written by a highly regarded programming expert and consultant to the Microsoft® .NET team, this guide is ideal for developers building any kind of application-including Microsoft® ASP.NET, Windows® Forms, Microsoft® SQL Server®, Web services, and console applications. You'll get hands-on instruction and extensive C# code samples to help you tackle the tough topics and develop high-performance applications." This is a very through book about Dot Net that I have completed reviewing. I commend it to all C# development teams and to individual developers with at least a year's worth of C# experience. The only drawback is that there should be a VB.NET equivalent book for the benefit of the many programming shops that have chosen VB.NET.For further details about the book see: http://oreilly.com/catalog/9780735627048The author has made some useful source available athttp://www.wintellect.com/Resources/Downloads/PushPin

Read the article
Ubuntu-Java Installation-Topcoder-“Java not found”

- by hakuna121

I realized that this might be the dumbest question here, but being a total beginner as I am, I really couldn't figure it out after trying all kinds of instructions I could found on the web. Specs: Ubuntu 13.04; What I intended to do: check out the Algorithm Competition section, by clicking the second-to-left tab,located on the top-left of the page: http://community.topcoder.com/tc What I got: a pop-up saying Java not found! Java could not be automatically detected on your machine. This page will attempt to automatically install Java and Java Web Start. If the download and installation does not occur automatically, click the link below to go to the Sun website where you can download the latest version of Java. What I did: I followed instructions on this Ubuntu Documentation page: https://help.ubuntu.com/community/Java and installed OpenJDK(Java Runtime Environment/Browser plugin/SDK) through Ubuntu Software Center. Then I rebooted the system, tried the page again. But I still got the java not found pop-up described above. Question: What's missing the get this working? Thank you!

Read the article
ASP.NET Webforms developers and web designers: how to interact?

- by just_name

I'm an ASP.NET Webforms developer, and I face some problems when I deal with designers. Designers always complain about the asp.net server controls. They'd rather just have an html file and create css files along with the required images to go with those. Sometimes, if the design phase is done in advance, I get html files with related css files, but then we face many problems integrating the design with the aspx files (sever controls an telerik controls ... etc). What I want to ask about is: How do I overcome these problems? The designers prefer php- and mvc developers because of the problems with .net server controls. I need to know how to interact with the designers in the correct way. Are there any tools or applications to provide the designers with the rendered (html page) of the .aspx pages? By that I mean the page in runtime rather than the aspx in Visual Studio. They do use Web Expression but they want the rendered page in html as well.

Read the article
Cloud Computing - just get started already!

- by BuckWoody

OK - you've been hearing about "cloud" (I really dislike that term, but whatever) for over two years. You've equated it with just throwing some VM's in some vendor's datacenter - which is certainly part of it, but not the whole story. There's a whole world of - wait for it - *coding* out there that you should be working on. If you're a developer, this is just a set of servers with operating systems and the runtime layer (like.NET, Java, PHP, etc.) that you can deploy code to and have it run. It can expand in a horizontal way, allowing massive - and I really, honestly mean massive, not just marketing talk kind of scale. We see this every day. If you're not a developer, well, now's the time to learn. Explore a little. Try it. We'll help you. There's a free conference you can attend in November, and you can sign up for it now. It's all on-line, and the tools you need to code are free. Put down Facebook and Twitter for a minute - go sign up. Learn. Do. :) See you there. http://www.windowsazureconf.net/

Read the article
RasterizerState set to null after calling DrawText in Nuclex

- by ProgrammerAtWork

I have the following code in XNA: // class members Text t1; Text t2; Text t3; // init // Debugfont is size 24 vectorfont t1 = MM.DebugFont24.Fill("hello"); t1 = MM.DebugFont24.Extrude("hello"); t2 = MM.DebugFont24.Fill("hello"); t2 = MM.DebugFont24.Extrude("hello"); t3 = MM.DebugFont24.Fill("hello"); t3 = MM.DebugFont24.Extrude("hello"); // Draw TextBatch test = new TextBatch(MM.GD); test.DrawText(t1, Color.Red); test.DrawText(t2, Color.Red); test.DrawText(t3, Color.Red); test.End(); //After the second call to the TextBatch, RasterizerState of the GraphicsDevice is set to null //But I don't get any runtime errors or any indication of that something is wrong. Is this supposed to happen? Or am I doing something wrong? I've discovered that this happened because culling was set to None when I was rendering textures

Read the article
Getting the total number of processors a computer has (c#)

- by mbcrump

Here is a code snippet for getting the total number of processors a computer has without using Environment.ProcessorCount. I found out that Environment.ProcessorCount is not necessary returning the correct value on some Intel based CPU’s. using System; usingSystem.Collections.Generic; usingSystem.Linq; usingSystem.Text; usingSystem.Globalization; usingSystem.Runtime.InteropServices; namespaceConsoleApplication4 { classProgram { static voidMain(string[] args) { int c = ProcessorCount; Console.WriteLine("The computer has {0} processors", c); Console.ReadLine(); } private static classNativeMethods { [StructLayout(LayoutKind.Sequential)] internal struct SYSTEM_INFO { public ushort wProcessorArchitecture; public ushort wReserved; public uint dwPageSize; publicIntPtr lpMinimumApplicationAddress; publicIntPtr lpMaximumApplicationAddress; publicUIntPtr dwActiveProcessorMask; public uint dwNumberOfProcessors; public uint dwProcessorType; public uint dwAllocationGranularity; public ushort wProcessorLevel; public ushort wProcessorRevision; } [DllImport("kernel32.dll", CharSet = CharSet.Auto, ExactSpelling = true)] internal static extern voidGetNativeSystemInfo(refSYSTEM_INFOlpSystemInfo); } public static int ProcessorCount { get { NativeMethods.SYSTEM_INFOlpSystemInfo = newNativeMethods.SYSTEM_INFO(); NativeMethods.GetNativeSystemInfo(reflpSystemInfo); return(int)lpSystemInfo.dwNumberOfProcessors; } } } }

Read the article
Queueing up character actions

- by TheBroodian

I'm developing a 2D platformer with action-fighter elements. Currently things are working relatively smoothly but I'm having difficulty sorting something out. For the time, keeping my character's states and actions separated and preventing them from stepping on each others' toes is working out well and properly, but I would like to add a feature to my character to get him to behave a little bit more fluidly for the player. At the moment, he has numerous attacks and abilities that he can execute, all of them being executed with button presses. Here lies the problem: Being as everything is executed through button presses, while an action is in progress I flag the game to disregard further button presses until the action has completed. Therefore, consecutive actions cannot be performed until after the previous action has completed entirely. In runtime this behavior feels very icky, and very ungamelike. In games that rest most memorably at the forefront of my mind the player is able to execute button commands during the process of actions, and at the end of the current action, the following action is executed (seems like some sort of a queue system or something) Can anybody offer any guidance with this?

Read the article
Is now the right time to move to .NET 4?

- by bconlon

The reason I pose this question is that I'm looking at WPF development and so using the latest version seems sensible. However, this means rolling out the .NET 4 runtime to PCs on old versions of the framework. Windows XP is still the number one O/S (estimated 40%+ market share). To run .NET 4 on XP requires Service Pack 3, and although it is good practice to move to the latest service packs, often large companies are slow to keep up due to the extensive testing involved. In fact, .NET 4 is not installed as standard with any Windows O/S as yet - Windows 7 and 2008 Server R2 have 3.5 installed. This is not quite as big an issue as it was for .NET 3.5 as .NET 4 is significantly smaller as it doesn't include the older runtimes - .NET 3.5 SP1 included .NET 3 and .NET 2 and was 250MB, although this was reduced by doing a web install. The size is also reduced a bit if you target the .NET 4 Client Profile, which should be OK for many WPF applications, and I think this may be rolled out as part of Windows service packs soon. But still, if your application is only 4-5 MB and you need 40-50 MB of Framework it is worth consideration before jumping in and using the new shiny features. #

Read the article
How-To: Run CMSDK against a RAC cluster

- by frank.closheim

Using CMSDK in a production environment often requires a robust, reliable and failover enabled repository. When using Oracle Real Application Cluster (RAC) with your CMSDK repository you need to have a specific configuration in place to support such a setup. This post will explain the configuration steps required when running CMSDK 9.0.4.6 with Oracle WebLogic Server (WLS).In the previous CMSDK 9.0.4.2 version a RAC enabled connect string looked like this: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = rac1)(PORT = 1521))(ADDRESS = (PROTOCOL = TCP)(HOST = rac2)(PORT = 1521))(LOAD_BALANCE = NO)(FAILOVER = ON)(CONNECT_DATA =(SERVICE_NAME = rac)(failover_mode = (type=select)(method=basic)))CMSDK 9.0.4.6 makes use of data sources to connect to the underlying database. These data sources are configured inside your Application Server, such as Oracle WebLogic Server.In Oracle WebLogic Server 10.3.4, a single data source implementation has been introduced to support an RAC cluster. It responds to Fast Application Notification (FAN) events to provide Fast Connection Failover (FCF), Runtime Connection Load-Balancing (RCLB), and RAC instance graceful shutdown. XA affinity is supported at the global transaction Id level. The new feature is called WebLogic Active GridLink for RAC; which is implemented as the GridLink data source within WebLogic Server.This GridLink data source also works with Oracle Single Client Access Name (SCAN). SCAN is a feature used in RAC environments that provides a single name for clients to access any Oracle Database running in a cluster. You can think of SCAN as a cluster alias for databases in the cluster. The benefit is that the client’s connect information does not need to change if you add or remove nodes or databases in the cluster.The CMSDK 9.0.4.6 documentation describes how to create a regular JDBC data source named jdbc/OracleDS. Please refer to the following document which describes in detail how to create a GridLink data source in WLS.

Read the article
How to make a iOS plugin for Unity3d

- by DannoEterno

I've passed last 2 days reading articles and book for understand how can i make a plugin for iOS in Unity. Basically i need just a demo for understand how it work. For now i've tried to make this process (with really poor luck): I've started a new project in Unity and writed a simple script using UnityEngine; using System.Collections; using System; using System.Runtime.InteropServices; public class CallPlugin : MonoBehaviour { [DllImport ("__Internal")] private static extern int test(); void Start () { Debug.Log(test()); } } Then i've created a project in Xcode with this simple script: extern "C"{ int test() { int che = 5; return che; } } Then i've tried: to put the .mm and .h in the Assets/Plugins/iOS = nothing to build the unity project and than add the .h and .mm in the Xcode project = nothing In Unity i will always get the EntryPointNotFoundException, so unity see the file but is unable to reach the method. The problem is... how?! :) Maybe i miss something or i've done something wrong? Thanks a lot for every help that you can give me :)

Read the article
Does it make sense to write build scripts in C++?

- by Klaim

I'm using CMake to generate my projects IDE/makefiles, but I still need to call custom "scripts" to manipulate my compiled files or even generate code. In previous projects I've been using Python and it was OK, but now I'm having serious trouble managing a lot of dependencies in two very big projects I'm working on so I want to minimize the dependencies everywhere. Someone suggested to me to use C++ to write my build scripts instead of adding a language dependency just for that. The projects themeselves already use C++ so there are several advantages that I can see: to build the whole project, only a C++ compiler and CMake would be necessary, nothing else (all the other dependencies are C or C++); C++ type safety (when using modern C++) makes everything easier to get "correct"; it's also the language I know the better so I'm more at ease with it even if I'm able to write some good Python code; potential gain in execution speed (but i don't think it will really be perceptible); However, I think there might be some drawbacks and I'm not sure of the real impact as I didn't try yet: might be longer to write the code (that said I'm not sure because I'm efficient enough in C++ to write something that work quickly, so maybe for this system it wouldn't be so long to write) (compilation time shouldn't be a problem for this case); I must assume that all the text files I'll read as input are in UTF-8, I'm not sure it can be easilly checked at runtime in C++ and the language will not check it for you; libraries in C++ are harder to manage than in scripting languages; I lack experience and forsight so maybe I'm missing advantages and drawbacks. So the question is: does it make sense to use C++ for this? do you have experiences to report and do you see advantages and disadvantages that might be important?

Read the article
Structure of a .NET Assembly

- by Om Talsania

Assembly is the smallest unit of deployment in .NET Framework.When you compile your C# code, it will get converted into a managed module. A managed module is a standard EXE or DLL. This managed module will have the IL (Microsoft Intermediate Language) code and the metadata. Apart from this it will also have header information.The following table describes parts of a managed module.PartDescriptionPE HeaderPE32 Header for 32-bit PE32+ Header for 64-bit This is a standard Windows PE header which indicates the type of the file, i.e. whether it is an EXE or a DLL. It also contains the timestamp of the file creation date and time. It also contains some other fields which might be needed for an unmanaged PE (Portable Executable), but not important for a managed one. For managed PE, the next header i.e. CLR header is more importantCLR HeaderContains the version of the CLR required, some flags, token of the entry point method (Main), size and location of the metadata, resources, strong name, etc.MetadataThere can be many metadata tables. They can be categorized into 2 major categories.1. Tables that describe the types and members defined in your code2. Tables that describe the types and members referenced by your codeIL CodeMSIL representation of the C# code. At runtime, the CLR converts it into native instructions

Read the article
Problem running apt-get DPKG broken?

- by nekochan7

Problem when runing apt-get debian av # sudo dpkg --configure -a Setting up libgdata2.1-cil (2.2.0.0-2) ... mono: ../nptl/pthread_mutex_lock.c:80: __pthread_mutex_cond_lock: Assertion `mutex->__data.__owner == 0' failed. Native stacktrace: /usr/bin/mono() [0x4ac5a1] /lib/x86_64-linux-gnu/libpthread.so.0(+0xf8f0) [0x7fee2c0e88f0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37) [0x7fee2bd65407] /lib/x86_64-linux-gnu/libc.so.6(abort+0x148) [0x7fee2bd68508] /lib/x86_64-linux-gnu/libc.so.6(+0x2e516) [0x7fee2bd5e516] /lib/x86_64-linux-gnu/libc.so.6(+0x2e5c2) [0x7fee2bd5e5c2] /lib/x86_64-linux-gnu/libpthread.so.0(+0x113f6) [0x7fee2c0ea3f6] /lib/x86_64-linux-gnu/libpthread.so.0(pthread_cond_wait+0x150) [0x7fee2c0e5140] /usr/bin/mono() [0x6058b3] /usr/bin/mono() [0x5fdd25] /usr/bin/mono() [0x604077] /lib/x86_64-linux-gnu/libpthread.so.0(+0x80ca) [0x7fee2c0e10ca] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d) [0x7fee2be1605d] Debug info from gdb: ================================================================= Got a SIGABRT while executing native code. This usually indicates a fatal error in the mono runtime or one of the native libraries used by your application. ================================================================= Aborted mono: ../nptl/pthread_mutex_lock.c:80: __pthread_mutex_cond_lock: Assertion `mutex->__data.__owner == 0' failed. Native stacktrace: /usr/bin/mono() [0x4ac5a1] /lib/x86_64-linux-gnu/libpthread.so.0(+0xf8f0) [0x7fcec8eef8f0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37) [0x7fcec8b6c407] /lib/x86_64-linux-gnu/libc.so.6(abort+0x148) [0x7fcec8b6f508] /lib/x86_64-linux-gnu/libc.so.6(+0x2e516) [0x7fcec8b65516] /lib/x86_64-linux-gnu/libc.so.6(+0x2e5c2) [0x7fcec8b655c2] /lib/x86_64-linux-gnu/libpthread.so.0(+0x113f6) [0x7fcec8ef13f6] /lib/x86_64-linux-gnu/libpthread.so.0(pthread_cond_wait+0x150) [0x7fcec8eec140] /usr/bin/mono() [0x6058b3] /usr/bin/mono() [0x5fdd25] /usr/bin/mono() [0x604077] /lib/x86_64-linux-gnu/libpthread.so.0(+0x80ca) [0x7fcec8ee80ca] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d) [0x7fcec8c1d05d] Debug info from gdb:

Read the article
So what is Active GridLink for RAC?

- by Ruma Sanyal

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 I had referred to Active GridLink for RAC in my blog yesterday and since then got several questions on this topic. So I decided to re-visit Active GridLink. With the release of version 11g, Oracle WebLogic Server started to provide strong support for the Real Application Clusters (RAC) features in Oracle Database 11g, minimizing database access time while allowing transparent access to rich pooling management functions that maximizes both connection performance and availability. WebLogic is the only application server in the marketplace which has been fully integrated and certified with Oracle Database RAC 11g without losing any rich functionality. Active GridLink provides Fast Connection Failover (FCF), Runtime Connection Load-Balancing (RCLB), and RAC instance graceful shutdown. With the key foundation for providing deeper integration with Oracle RAC, this single data source implementation in Oracle WebLogic Server supports the full and unrestricted use of database services as the connection target for a data source. For more details and to understand how our customer NEC leverages this capability, read the whitepapers on this topic. Get in depth ‘how-to’ details from this youtube video from our resident expert, Frances Zhao.

Read the article
XML Rules Engine and Validation Tutorial with NIEM

- by drrwebber

Our new XML Validation Framework tutorial video is now available. See how to easily integrate code-free adaptive XML validation services into your web services using the Java CAMV validation engine. CAMV allows you to build fault tolerant content checking with XPath that optionally use SQL data lookups. This can provide warnings as well as error conditions to tailor your validation layer to exactly meet your business application needs. Also available is developing test suites using Apache ANT scripting of validations. This allows a community to share sets of conformance checking test and tools . On the technical XML side the video introduces XPath validation rules and illustrates and the concepts of XML content and structure validation. CAM validation templates allow contextual parameter driven dynamic validation services to be implemented compared to using a static and brittle XSD schema approach.The SQL table lookup and code list validation are discussed and examples presented.Features are highlighted along with a demonstration of the interactive generation of actual live XML data from a SQL data store and then validation processing complete with errors and warnings detection.The presentation provides a primer for developing web service XML validation and integration into a SOA approach along with examples and resources. Also alignment with the NIEM IEPD process for interoperable information exchanges is discussed along with NIEM rules services.The CAMV engine is a high performance scalable Java component for rapidly implementing code-free validation services and methods. CAMV is a next generation WYSIWYG approach that builds from older Schematron coding based interpretative runtime tools and provides a simpler declarative metaphor for rules definition. See: http://www.youtube.com/user/TheCAMeditor

Read the article
Use decorator and factory together to extend objects?

- by TheClue

I'm new to OOP and design pattern. I've a simple app that handles the generation of Tables, Columns (that belong to Table), Rows (that belong to Column) and Values (that belong to Rows). Each of these object can have a collection of Property, which is in turn defined as an enum. They are all interfaces: I used factories to get concrete instances of these products, depending on circumnstances. Now I'm facing the problem of extending these classes. Let's say I need another product called "SpecialTable" which in turn has some special properties or new methods like 'getSomethingSpecial' or an extended set of Property. The only way is to extend/specialize all my elements (ie. build a SpecialTableFactory, a SpecialTable interface and a SpecialTableImpl concrete)? What to do if, let's say, I plan to use standard methods like addRow(Column column, String name) that doesn't need to be specialized? I don't like the idea to inherit factories and interfaces, but since SpecialTable has more methods than Table i guess it cannot share the same factory. Am I wrong? Another question: if I need to define product properties at run time (a Table that is upgraded to SpecialTable at runtime), i guess i should use a decorator. Is it possible (and how) to combine both factory and decorator design? Is it better to use a State or Strategy pattern, instead?

Read the article
Returning a flexible datatype from a C++ function

- by GavinH

I'm developing for a legacy C++ application which uses ODBC for it's data access. Coming from a C# background, I really miss the ADO style of data access. I'm writing a wrapper (because we can't actually use ADO) to make our data access less painful. This means no char arrays, no manual text blob streaming, and no declaritive column binding. I'm struggling with how to store / return data values. In C# at least, you can declare an object and cast it to whatever (as long as the type is convertable). My current C++ solution is to use boost::any to store the data value in a custom DataColumnValue object. This class has conversion and assignment operators to the various types used in our app (more than 10). There's a bit of complexity here because if you store an int in the boost::any and try to boost::any_cast<long> you get a boost::bad_any_cast. Client objects shouldn't have to know how the value is stored internally. Does anyone have any experience trying to store / return values whose types are only known at runtime? Is there a better / cleaner way?

Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122 | Next Page >