Search Results

Search found 2967 results on 119 pages for 'accounts'.

Page 116/119 | < Previous Page | 112 113 114 115 116 117 118 119  | Next Page >

• heimdal kerberos in openldap issue

  - by Brian

  I think I posted this on the wrong 'sister site', so here it is. I'm having a bit of trouble getting Kerberos (Heimdal version) to work nicely with OpenLDAP. The kerberos database is being stored in LDAP itself. The KDC uses SASL EXTERNAL authentication as root to access the container ou. I created the database in LDAP fine using kadmin -l, but it won't let me use kadmin without the -l flag: root@rds0:~# kadmin -l kadmin> list * krbtgt/REALM kadmin/changepw kadmin/admin changepw/kerberos kadmin/hprop WELLKNOWN/ANONYMOUS WELLKNOWN/org.h5l.fast-cookie@WELLKNOWN:ORG.H5L default brian.empson brian.empson/admin host/rds0.example.net ldap/rds0.example.net host/localhost kadmin> exit root@rds0:~# kadmin kadmin> list * brian.empson/admin@REALM's Password: <----- With right password kadmin: kadm5_get_principals: Key table entry not found kadmin> list * brian.empson/admin@REALM's Password: <------ With wrong password kadmin: kadm5_get_principals: Already tried ENC-TS-info, looping kadmin> I can get tickets without a problem: root@rds0:~# klist Credentials cache: FILE:/tmp/krb5cc_0 Principal: brian.empson@REALM Issued Expires Principal Nov 11 14:14:40 2012 Nov 12 00:14:37 2012 krbtgt/REALM@REALM Nov 11 14:40:35 2012 Nov 12 00:14:37 2012 ldap/rds0.example.net@REALM But I can't seem to change my own password without kadmin -l: root@rds0:~# kpasswd brian.empson@REALM's Password: <---- Right password New password: Verify password - New password: Auth error : Authentication failed root@rds0:~# kpasswd brian.empson@REALM's Password: <---- Wrong password kpasswd: krb5_get_init_creds: Already tried ENC-TS-info, looping kadmin's logs are not helpful at all: 2012-11-11T13:48:33 krb5_recvauth: Key table entry not found 2012-11-11T13:51:18 krb5_recvauth: Key table entry not found 2012-11-11T13:53:02 krb5_recvauth: Key table entry not found 2012-11-11T14:16:34 krb5_recvauth: Key table entry not found 2012-11-11T14:20:24 krb5_recvauth: Key table entry not found 2012-11-11T14:20:44 krb5_recvauth: Key table entry not found 2012-11-11T14:21:29 krb5_recvauth: Key table entry not found 2012-11-11T14:21:46 krb5_recvauth: Key table entry not found 2012-11-11T14:23:09 krb5_recvauth: Key table entry not found 2012-11-11T14:45:39 krb5_recvauth: Key table entry not found The KDC reports that both accounts succeed in authenticating: 2012-11-11T14:48:03 AS-REQ brian.empson@REALM from IPv4:192.168.72.10 for kadmin/changepw@REALM 2012-11-11T14:48:03 Client sent patypes: REQ-ENC-PA-REP 2012-11-11T14:48:03 Looking for PK-INIT(ietf) pa-data -- brian.empson@REALM 2012-11-11T14:48:03 Looking for PK-INIT(win2k) pa-data -- brian.empson@REALM 2012-11-11T14:48:03 Looking for ENC-TS pa-data -- brian.empson@REALM 2012-11-11T14:48:03 Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ 2012-11-11T14:48:03 sending 294 bytes to IPv4:192.168.72.10 2012-11-11T14:48:03 AS-REQ brian.empson@REALM from IPv4:192.168.72.10 for kadmin/changepw@REALM 2012-11-11T14:48:03 Client sent patypes: ENC-TS, REQ-ENC-PA-REP 2012-11-11T14:48:03 Looking for PK-INIT(ietf) pa-data -- brian.empson@REALM 2012-11-11T14:48:03 Looking for PK-INIT(win2k) pa-data -- brian.empson@REALM 2012-11-11T14:48:03 Looking for ENC-TS pa-data -- brian.empson@REALM 2012-11-11T14:48:03 ENC-TS Pre-authentication succeeded -- brian.empson@REALM using aes256-cts-hmac-sha1-96 2012-11-11T14:48:03 ENC-TS pre-authentication succeeded -- brian.empson@REALM 2012-11-11T14:48:03 AS-REQ authtime: 2012-11-11T14:48:03 starttime: unset endtime: 2012-11-11T14:53:00 renew till: unset 2012-11-11T14:48:03 Client supported enctypes: aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-cbc-sha1, arcfour-hmac-md5, using aes256-cts-hmac-sha1-96/aes256-cts-hmac-sha1-96 2012-11-11T14:48:03 sending 704 bytes to IPv4:192.168.72.10 2012-11-11T14:45:39 AS-REQ brian.empson/admin@REALM from IPv4:192.168.72.10 for kadmin/admin@REALM 2012-11-11T14:45:39 Client sent patypes: REQ-ENC-PA-REP 2012-11-11T14:45:39 Looking for PK-INIT(ietf) pa-data -- brian.empson/admin@REALM 2012-11-11T14:45:39 Looking for PK-INIT(win2k) pa-data -- brian.empson/admin@REALM 2012-11-11T14:45:39 Looking for ENC-TS pa-data -- brian.empson/admin@REALM 2012-11-11T14:45:39 Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ 2012-11-11T14:45:39 sending 303 bytes to IPv4:192.168.72.10 2012-11-11T14:45:39 AS-REQ brian.empson/admin@REALM from IPv4:192.168.72.10 for kadmin/admin@REALM 2012-11-11T14:45:39 Client sent patypes: ENC-TS, REQ-ENC-PA-REP 2012-11-11T14:45:39 Looking for PK-INIT(ietf) pa-data -- brian.empson/admin@REALM 2012-11-11T14:45:39 Looking for PK-INIT(win2k) pa-data -- brian.empson/admin@REALM 2012-11-11T14:45:39 Looking for ENC-TS pa-data -- brian.empson/admin@REALM 2012-11-11T14:45:39 ENC-TS Pre-authentication succeeded -- brian.empson/admin@REALM using aes256-cts-hmac-sha1-96 2012-11-11T14:45:39 ENC-TS pre-authentication succeeded -- brian.empson/admin@REALM 2012-11-11T14:45:39 AS-REQ authtime: 2012-11-11T14:45:39 starttime: unset endtime: 2012-11-11T15:45:39 renew till: unset 2012-11-11T14:45:39 Client supported enctypes: aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-cbc-sha1, arcfour-hmac-md5, using aes256-cts-hmac-sha1-96/aes256-cts-hmac-sha1-96 2012-11-11T14:45:39 sending 717 bytes to IPv4:192.168.72.10 I wish I had more detailed logging messages, running kadmind in debug mode seems to almost work but it just kicks me back to the shell when I type in the correct password. GSSAPI via LDAP doesn't work either, but I suspect it's because some parts of kerberos aren't working either: root@rds0:~# ldapsearch -Y GSSAPI -H ldaps:/// -b "o=mybase" o=mybase SASL/GSSAPI authentication started ldap_sasl_interactive_bind_s: Other (e.g., implementation specific) error (80) additional info: SASL(-1): generic failure: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information () root@rds0:~# ldapsearch -Y EXTERNAL -H ldapi:/// -b "o=mybase" o=mybase SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 # extended LDIF <snip> Would anyone be able to point me in the right direction?

  Read the article

• MySQL is hogging my server resources

  - by Reacen

  Does anyone have any idea of what can cause this weird behaviour and how I go about fixing it? This is all coming from MySQL only (both RAM and CPU usage), for about 10 minutes after I reboot my Java game server (that has a pool of 256 connections). There are not that many queries and I think it may be more of a MySQL misconfiguration problem. My server: 3.20 GHz * 6 core / 24 GB RAM / 64 bit Windows Server 2003. My game server: Java server, with 256 MySQL connections pool (MyISAM engine), about 500,000 accounts, and 9 million rows of game items in database and about 3,000 players are connected. After about 15 minutes of the game server reboot, the server resumes its stability and CPU usage drop down to 1% ~ 5% and memory to 6 GB. Here is a copy of my MySQL configuration. Also, any advice about my MySQL configuration will be appreciated. I really set it up almost at random. # Example MySQL config file for very large systems. # # This is for a large system with memory of 1G-2G where the system runs mainly # MySQL. # # You can copy this file to # /etc/my.cnf to set global options, # mysql-data-dir/my.cnf to set server-specific options (in this # installation this directory is C:\mysql\data) or # ~/.my.cnf to set user-specific options. # # In this file, you can use all long options that a program supports. # If you want to know which options a program supports, run the program # with the "--help" option. # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /tmp/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] #log=c:\mysql.log port = 3306 socket = /tmp/mysql.sock skip-locking key_buffer_size = 2572M max_allowed_packet = 64M table_open_cache = 512 sort_buffer_size = 128M read_buffer_size = 128M read_rnd_buffer_size = 128M myisam_sort_buffer_size = 500M thread_cache_size = 32 query_cache_size = 1948M # Try number of CPU's*2 for thread_concurrency thread_concurrency = 12 max_connections = 5000 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # #skip-networking # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 # Replication Slave (comment out master section to use this) # # To configure this host as a replication slave, you can choose between # two methods : # # 1) Use the CHANGE MASTER TO command (fully described in our manual) - # the syntax is: # # CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, # MASTER_USER=<user>, MASTER_PASSWORD=<password> ; # # where you replace <host>, <user>, <password> by quoted strings and # <port> by the master's port number (3306 by default). # # Example: # # CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, # MASTER_USER='joe', MASTER_PASSWORD='secret'; # # OR # # 2) Set the variables below. However, in case you choose this method, then # start replication for the first time (even unsuccessfully, for example # if you mistyped the password in master-password and the slave fails to # connect), the slave will create a master.info file, and any later # change in this file to the variables' values below will be ignored and # overridden by the content of the master.info file, unless you shutdown # the slave server, delete master.info and restart the slaver server. # For that reason, you may want to leave the lines below untouched # (commented) and instead use CHANGE MASTER TO (see above) # # required unique id between 2 and 2^32 - 1 # (and different from the master) # defaults to 2 if master-host is set # but will not function as a slave if omitted #server-id = 2 # # The replication master for this slave - required #master-host = <hostname> # # The username the slave will use for authentication when connecting # to the master - required #master-user = <username> # # The password the slave will authenticate with when connecting to # the master - required #master-password = <password> # # The port the master is listening on. # optional - defaults to 3306 #master-port = <port> # # binary logging - not required for slaves, but recommended #log-bin=mysql-bin # # binary logging format - mixed recommended #binlog_format=mixed # Point the following paths to different dedicated disks #tmpdir = /tmp/ #log-update = /path-to-dedicated-directory/hostname # Uncomment the following if you are using InnoDB tables #innodb_data_home_dir = C:\mysql\data/ #innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend #innodb_log_group_home_dir = C:\mysql\data/ # You can set .._buffer_pool_size up to 50 - 80 % # of RAM but beware of setting memory usage too high #innodb_buffer_pool_size = 384M #innodb_additional_mem_pool_size = 20M # Set .._log_file_size to 25 % of buffer pool size #innodb_log_file_size = 100M #innodb_log_buffer_size = 8M #innodb_flush_log_at_trx_commit = 1 #innodb_lock_wait_timeout = 50 [mysqldump] quick max_allowed_packet = 64M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [myisamchk] key_buffer_size = 256M sort_buffer_size = 256M read_buffer = 8M write_buffer = 8M [mysqlhotcopy] interactive-timeout

  Read the article

• LDAP query on linux against AD returns groups with no members

  - by SethG

  I am using LDAP+kerberos to authenticate against Active Directory on Windows 2003 R2. My krb5.conf and ldap.conf appear to be correct (according to pretty much every sample I found on the 'net). I can login to the host with both password and ssh keys. When I run getent passwd, all my ldap user accounts are listed with all the important attributes. When I run getent group, all the ldap groups and their gid's are listed, but no group members. If I run ldapsearch and filter on any group, the members are all listed with the "member" attribute. So the data is there for the taking, it's just not being parsed properly. It would appear that I simply am using an incorrect mapping in ldap.conf, but I can't see it. I've tried several variations and all give the same result. Here is my current ldap.conf: host <ad-host1-ip> <ad-host2-ip> base dc=my,dc=full,dc=dn uri ldap://<ad-host1> ldap://<ad-host2> ldap_version 3 binddn <mybinddn> bindpw <mybindpw> scope sub bind_policy hard nss_reconnect_tries 3 nss_reconnect_sleeptime 1 nss_reconnect_maxsleeptime 8 nss_reconnect_maxconntries 3 nss_map_objectclass posixAccount User nss_map_objectclass posixGroup Group nss_map_attribute uid sAMAccountName nss_map_attribute gidNumber msSFU30GidNumber nss_map_attribute uidNumber msSFU30UidNumber nss_map_attribute cn cn nss_map_attribute gecos displayName nss_map_attribute homeDirectory msSFU30HomeDirectory nss_map_attribute loginShell msSFU30LoginShell nss_map_attribute uniqueMember member pam_filter objectcategory=User pam_login_attribute sAMAccountName pam_member_attribute member pam_password ad Here's the kicker: this config works 100% fine on a different linux box with a different distro. It does not work on the distro I am planning on switching to. I have installed from source the versions of pam_ldap and nss_ldap on the new box to match the old box, which fixed another problem I was having with this setup. Other relevant info is the original AD box was Windows 2003. It's mirror died a horrible hardware death so I'm trying to add two more 2003-R2 servers to the mirror tree and ultimately drop the old 2003 box. The new R2 boxes appear to have joined the DC forest properly. What do I need to do to get groups working? I've exhausted all the resources I could find and need a different angle. Any input is appreciated. Status update, 7/31/09 I have managed to tweak my config file to get full info from the AD and performance is nice and snappy. I replaced the back-rev'd copies of pam_ldap and nss_ldap with the current ones for the distro I'm using, so it's back to a standard out-of-the-box install. Here's my current config: host <ad-host1-ip> <ad-host2-ip> base dc=my,dc=full,dc=dn uri ldap://<ad-host1> ldap://<ad-host2> ldap_version 3 binddn <mybinddn> bindpw <mybindpw> scope sub bind_policy soft nss_reconnect_tries 3 nss_reconnect_sleeptime 1 nss_reconnect_maxsleeptime 8 nss_reconnect_maxconntries 3 nss_connect_policy oneshot referrals no nss_map_objectclass posixAccount User nss_map_objectclass posixGroup Group nss_map_attribute uid sAMAccountName nss_map_attribute gidNumber msSFU30GidNumber nss_map_attribute uidNumber msSFU30UidNumber nss_map_attribute cn cn nss_map_attribute gecos displayName nss_map_attribute homeDirectory msSFU30HomeDirectory nss_map_attribute loginShell msSFU30LoginShell nss_map_attribute uniqueMember member pam_filter objectcategory=CN=Person,CN=Schema,CN=Configuration,DC=w2k,DC=cis,DC=ksu,DC=edu pam_login_attribute sAMAccountName pam_member_attribute member pam_password ad ssl off tls_checkpeer no sasl_secprops maxssf=0 The remaining problem now is when you run the groups command, not all subscribed groups are listed. Some are (one or two), but not all. Group memberships are still honored, such as file and printer access. getent group foo still shows that the user is a member of group foo. So it appears to be a presentation bug, and does not interfere with normal operation. It also appears that some (I have not determined exactly how many) group searches do not resolve correctly, even though the group is listed. eg, when you run "getent group bar", nothing is returned, but if you run "getent group|grep bar" or "getent group|grep <bar_gid>" you can see that it indeed listed and your group name and gid are correct. This still seems like an LDAP search or mapping error, but I can't figure out what it is. I'm a heckuva lot closer than earlier in the week, but I'd really like to get this last detail ironed out.

  Read the article

• Intermittent Connection Issues to SQL Server 2008 R2 RTM

  - by Chandan Jha

  The problem I am facing is a very complex one and inspite of trying to gather a root cause of the problem, I am standing at the same place after 2 months with just bits and pieces of information.Here is a scenario: There is a windows 2003 server which uses an system DSN ODBC connection. I looked into the driver properties and it is as follows: Name Version File SQL Server 2000.86.3959.00 SQLSRV32.DLL Now, this system DSN has been given configured with TCP\IP in Network Libraries and 'determine port dynamically' is checked. Now, lets come to the database destination. It is hosted on Windows 2008 having SQL 2008 R2 RTM version 64-bit. Now, I will give you a an overview about the events that happen and whatever troubleshooting I could perform: I get an email saying 'blah blah' failed and the only message their application gets is 'cannot connect to database' I go the SQL Server logs and find the following information: Login failed for user ''. Reason: An attempt to login using SQL authentication failed. Server is configured for Windows authentication only. [CLIENT: 10.0.0.xx Error: 18456, Severity: 14, State: 58.] A quick search shows that this error may come when an SQL Server is configured with windows authentication but its not true. We have mixed mode and connection issue is intermittent. This SQL Server is configured to run on a local system account but since we use only SQL Server accounts to connect to this, there should not be any Kerberos errors. When I run a profiler trace and see only 'existing connections', i see a lot of them coming from my client server displaying the sql user but NO hostname is shown. Textdata field shows TCP\IP information along with some arithabort and ansi-null settings. Now, I tried looking into ring connectivity buffer by using following: SELECTCAST(record AS XML) FROM sys.dm_os_ring_buffers WHERE ring_buffer_type = 'RING_BUFFER_CONNECTIVITY' One sample output is: <ConnectivityTraceRecord> <RecordType>Error</RecordType> <RecordSource>Tds</RecordSource> <Spid>118</Spid> <SniConnectionId>5124905D-D1EC-460E-AD78-201050B78C67</SniConnectionId> <OSError>0</OSError> <SniConsumerError>18452</SniConsumerError> <SniProvider>7</SniProvider> <State>1</State> <RemoteHost>10.0.0.21</RemoteHost> <RemotePort>5008</RemotePort> <LocalHost>10.1.0.38</LocalHost> <LocalPort>1433</LocalPort> <RecordTime>6/6/2012 21:14:57.527</RecordTime> <TdsBuffersInformation> <TdsInputBufferError>0</TdsInputBufferError> <TdsOutputBufferError>0</TdsOutputBufferError> <TdsInputBufferBytes>120</TdsInputBufferBytes> </TdsBuffersInformation> <TdsDisconnectFlags> <PhysicalConnectionIsKilled>0</PhysicalConnectionIsKilled> <DisconnectDueToReadError>0</DisconnectDueToReadError> <NetworkErrorFoundInInputStream>0</NetworkErrorFoundInInputStream> <ErrorFoundBeforeLogin>0</ErrorFoundBeforeLogin> <SessionIsKilled>0</SessionIsKilled> <NormalDisconnect>0</NormalDisconnect> </TdsDisconnectFlags> </ConnectivityTraceRecord> <Stack> <frame id="0">0X000000000174C34B</frame> <frame id="1">0X0000000001748FDD</frame> <frame id="2">0X0000000002461001</frame> <frame id="3">0X0000000000C47E98</frame> <frame id="4">0X00000000008015AD</frame> <frame id="5">0X0000000000801492</frame> <frame id="6">0X00000000003CBBD8</frame> <frame id="7">0X00000000003CB8BA</frame> <frame id="8">0X00000000003CB6FF</frame> <frame id="9">0X00000000008E8FB6</frame> <frame id="10">0X00000000008E9175</frame> <frame id="11">0X00000000008E9839</frame> <frame id="12">0X00000000008E9502</frame> <frame id="13">0X0000000074E437D7</frame> <frame id="14">0X0000000074E43894</frame> <frame id="15">0X00000000775A652D</frame> Somehow all the errors show error number 18452 whereas I never found this error in my SQL logs where I see only 18456. I am just stuck on a dead end because this connection issue appears intermittently. Sorry for a long question but I hope if you read this, you can make out that I tried a lot at my end before giving up.

  Read the article

• All downloads being interrupted

  - by Jake

  System: Windows 7 Professional 64bit. 8GB RAM, Intel i5-2400 CPU, +300GB free on the hard drive. AVG Internet Security 2012 (enabled & disabled, with firewall enabled and disabled - no effect for either). This computer is less than a year old. Network: This problem is occurring on a single computer on a network with multiple computers. The router is a Motorola Netopia 3347-02 (DSL Modem/Wireless Router combined). The computer is plugged in directly to the modem, other computers are using the wireless successfully. The router has been reset. The only thing odd about the connection between the router and computer is that it is configured to allow RDP through, so it is assigned a static IP by the router and port forwarding is enabled for port 3389. Also, though I doubt it matters, a second wireless router is active behind this router providing a second network that some computers in the area use without issues. Details: All downloads initiated on this specific computer eventually fail, this includes streaming from youtube, specialized downloads (itunes), downloads from websites, FTP downloads, etc. Failure occurs with all browsers, but in chrome this is the process it takes: 1) Download begins normally, 2) At some point between (observed) 7MBs and 229MBs the download stops progressing (at this point, if watching chrome's task manager, you can see the network activity for the downloading tab drop to 0kps), 3) for some time the download sits there still attempting to complete, but will eventually display "123,049,871/0 B, Interrupted" (where the number is whatever it actually got to). The file I am using to test this is a very large .zip file located on a server I control, but the problem seems to occur on any site. The amount downloaded is completely random, and seems to be more time-based than anything (if I start a download immediately after the last one fails, it tends to get further than the last one). Small files can get through for this reason, though they can fail as well. In a test where I simultaneously downloaded the same file via HTTP (chrome) and FTP (windows explorer), both downloads failed at the same instant, though explorer displayed "Connection timed out" several minutes before chrome finally showed the download as interrupted. Other things I have tried based on advice given to people with similar/identical problems: Setting my MTU to 1492 (as described here: http://blog.thecompwiz.com/2011/08/networking-issues.html) Disabling write caching to the hard drive storing the download on an external device successfully transmitted +1GB file from one computer on the same network to this computer disabling indexing in the folder the download was being stored in disabling all security software checked to make sure all drivers were up to date read about 50 accounts with nearly exact descriptions of what I'm experiencing, none of which had a solution given Running Processes: Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 104,836 K smss.exe 332 Services 0 1,276 K csrss.exe 764 Services 0 5,060 K wininit.exe 820 Services 0 4,748 K csrss.exe 844 Console 1 23,764 K services.exe 876 Services 0 11,856 K lsass.exe 892 Services 0 14,420 K lsm.exe 900 Services 0 7,820 K winlogon.exe 944 Console 1 7,716 K svchost.exe 428 Services 0 12,744 K svchost.exe 796 Services 0 12,240 K svchost.exe 1036 Services 0 22,372 K svchost.exe 1084 Services 0 174,132 K svchost.exe 1112 Services 0 56,144 K svchost.exe 1288 Services 0 18,640 K svchost.exe 1404 Services 0 29,616 K spoolsv.exe 1576 Services 0 25,924 K svchost.exe 1616 Services 0 12,788 K AppleMobileDeviceService. 1728 Services 0 9,796 K avgwdsvc.exe 1820 Services 0 8,268 K mDNSResponder.exe 1844 Services 0 5,832 K w3dbsmgr.exe 1108 Services 0 43,760 K QBCFMonitorService.exe 1336 Services 0 16,408 K svchost.exe 2404 Services 0 28,240 K taskhost.exe 3020 Console 1 12,372 K dwm.exe 2280 Console 1 5,968 K explorer.exe 2964 Console 1 152,476 K WUDFHost.exe 3316 Services 0 6,740 K svchost.exe 3408 Services 0 5,556 K RAVCpl64.exe 3684 Console 1 13,864 K igfxtray.exe 3700 Console 1 7,804 K hkcmd.exe 3772 Console 1 7,868 K igfxpers.exe 3788 Console 1 10,940 K sidebar.exe 3836 Console 1 84,400 K chrome.exe 3964 Console 1 19,640 K pptd40nt.exe 4068 Console 1 5,156 K acrotray.exe 3908 Console 1 14,676 K avgtray.exe 3872 Console 1 9,508 K jusched.exe 4076 Console 1 4,412 K iTunesHelper.exe 1532 Console 1 87,308 K SearchIndexer.exe 3492 Services 0 36,948 K iPodService.exe 4136 Services 0 7,944 K BrccMCtl.exe 4276 Console 1 18,132 K splwow64.exe 4380 Console 1 32,600 K qbupdate.exe 4836 Console 1 24,236 K svchost.exe 4288 Services 0 20,700 K wmpnetwk.exe 3112 Services 0 9,516 K FNPLicensingService.exe 5248 Services 0 5,852 K QBW32.EXE 5508 Console 1 127,068 K QBDBMgrN.exe 5600 Services 0 42,252 K EXCEL.EXE 2512 Console 1 99,100 K LMS.exe 3188 Services 0 5,616 K UNS.exe 1600 Services 0 7,308 K axlbridge.exe 5260 Console 1 5,132 K chrome.exe 5888 Console 1 200,336 K chrome.exe 3536 Console 1 26,076 K chrome.exe 1952 Console 1 20,168 K chrome.exe 4596 Console 1 24,696 K chrome.exe 4292 Console 1 48,096 K chrome.exe 2796 Console 1 23,520 K Acrobat.exe 1240 Console 1 87,252 K 123w.exe 4892 Console 1 22,728 K calc.exe 1700 Console 1 12,636 K chrome.exe 1328 Console 1 28,888 K chrome.exe 3696 Console 1 47,012 K rundll32.exe 6320 Console 1 7,104 K chrome.exe 4928 Console 1 44,248 K AVGIDSAgent.exe 260 Services 0 12,940 K avgfws.exe 6052 Services 0 26,912 K avgnsa.exe 5064 Services 0 2,496 K avgrsa.exe 3088 Services 0 2,200 K avgcsrva.exe 2596 Services 0 380 K avgcsrva.exe 6948 Services 0 408 K StikyNot.exe 452 Console 1 14,772 K chrome.exe 4580 Console 1 28,200 K chrome.exe 4016 Console 1 57,756 K svchost.exe 7140 Services 0 4,500 K chrome.exe 6264 Console 1 56,824 K chrome.exe 7008 Console 1 56,896 K chrome.exe 2224 Console 1 38,032 K taskhost.exe 612 Console 1 7,228 K chrome.exe 6000 Console 1 10,928 K chrome.exe 2568 Console 1 43,052 K chrome.exe 272 Console 1 75,988 K chrome.exe 7328 Console 1 53,240 K PaprPort.exe 7976 Console 1 137,152 K pplinks.exe 7500 Console 1 14,052 K ppscanmg.exe 5744 Console 1 18,996 K taskeng.exe 7388 Console 1 6,308 K SearchProtocolHost.exe 8024 Services 0 8,804 K SearchFilterHost.exe 7232 Services 0 7,848 K chrome.exe 8016 Console 1 37,440 K cmd.exe 7692 Console 1 3,096 K conhost.exe 7516 Console 1 5,872 K tasklist.exe 8160 Console 1 5,772 K WmiPrvSE.exe 7684 Services 0 6,400 K Any help with this would be greatly appreciated, I've been beating my head against a wall over this all day. This computer serves dual purpose as the main company document server and the Owner's work computer, it's fairly important it be fully functional and I cannot figure this out.

  Read the article

• Postfix configuration - Uing virtual min but server is bouncing back my mail.

  - by brodiebrodie

  I have no experience in setting up postfix, and thought virtualmin minght do the legwork for me. Appears not. When I try to send mail to the domain (either [email protected] [email protected] or [email protected]) I get the following message returned This is the mail system at host dedq239.localdomain. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to <postmaster> If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <[email protected]> (expanded from <[email protected]>): User unknown in virtual alias table Final-Recipient: rfc822; [email protected] Original-Recipient: rfc822;[email protected] Action: failed Status: 5.0.0 Diagnostic-Code: X-Postfix; User unknown in virtual alias table How can I diagnose the problem here? It seems that the mail gets to my server but the server fails to locally deliver the message to the correct user. (This is a guess, truthfully I have no idea what is happening). I have checked my virtual alias table and it seems to be set up correctly (I can post if this would be helpful). Can anyone give me a clue as to the next step? Thanks alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = no local_recipient_maps = $virtual_mailbox_maps mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination smtpd_sasl_auth_enable = yes soft_bounce = no unknown_local_recipient_reject_code = 550 virtual_alias_maps = hash:/etc/postfix/virtual My mail log file (the last entry) Sep 30 15:13:47 dedq239 postfix/cleanup[7237]: 207C6B18158: message-id=<[email protected]> Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 207C6B18158: from=<[email protected]>, size=1805, nrcpt=1 (queue active) Sep 30 15:13:47 dedq239 postfix/error[7238]: 207C6B18158: to=<[email protected]>, orig_to=<[email protected]>, relay=none, delay=0.64, delays=0.61/0.01/0/0.02, dsn=5.0.0, status=bounced (User unknown in virtual alias table) Sep 30 15:13:47 dedq239 postfix/cleanup[7237]: 8DC13B18169: message-id=<[email protected]> Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 8DC13B18169: from=<>, size=3691, nrcpt=1 (queue active) Sep 30 15:13:47 dedq239 postfix/bounce[7239]: 207C6B18158: sender non-delivery notification: 8DC13B18169 Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 207C6B18158: removed Sep 30 15:13:48 dedq239 postfix/smtp[7240]: 8DC13B18169: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[209.85.216.55]:25, delay=1.3, delays=0.02/0.01/0.58/0.75, dsn=2.0.0, status=sent (250 2.0.0 OK 1254348828 36si15082901pxi.91) Sep 30 15:13:48 dedq239 postfix/qmgr[7177]: 8DC13B18169: removed Sep 30 15:14:17 dedq239 postfix/smtpd[7233]: disconnect from mail-bw0-f228.google.com[209.85.218.228] etc.aliases file below I have not touched this file - myvirtualdomain is a replacement for my real domain name # Aliases in this file will NOT be expanded in the header from # Mail, but WILL be visible over networks or from /bin/mail. # # >>>>>>>>>> The program "newaliases" must be run after # >> NOTE >> this file is updated for any changes to # >>>>>>>>>> show through to sendmail. # # Basic system aliases -- these MUST be present. mailer-daemon: postmaster postmaster: root # General redirections for pseudo accounts. bin: root daemon: root adm: root lp: root sync: root shutdown: root halt: root mail: root news: root uucp: root operator: root games: root gopher: root ftp: root nobody: root radiusd: root nut: root dbus: root vcsa: root canna: root wnn: root rpm: root nscd: root pcap: root apache: root webalizer: root dovecot: root fax: root quagga: root radvd: root pvm: root amanda: root privoxy: root ident: root named: root xfs: root gdm: root mailnull: root postgres: root sshd: root smmsp: root postfix: root netdump: root ldap: root squid: root ntp: root mysql: root desktop: root rpcuser: root rpc: root nfsnobody: root ingres: root system: root toor: root manager: root dumper: root abuse: root newsadm: news newsadmin: news usenet: news ftpadm: ftp ftpadmin: ftp ftp-adm: ftp ftp-admin: ftp www: webmaster webmaster: root noc: root security: root hostmaster: root info: postmaster marketing: postmaster sales: postmaster support: postmaster # trap decode to catch security attacks decode: root # Person who should get root's mail #root: marc abuse-myvirtualdomain.com: [email protected] My etc/postfix/virtual file is below - again myvirtualdomain is a replacement. I think this file was generated by Virtualmin and I have tried messing around with is with no success... This is the version without my changes. myunixusername@myvirtualdomain .com myunixusername myvirtualdomain .com myvirtualdomain.com [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected]

  Read the article

• Windows DNS Server 2008 R2 fallaciously returns SERVFAIL

  - by Easter Sunshine

  I have a Windows 2008 R2 domain controller which is also a DNS server. When resolving certain TLDs, it returns a SERVFAIL: $ dig bogus. ; <<>> DiG 9.8.1 <<>> bogus. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 31919 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;bogus. IN A I get the same result for a real TLD like com. when querying the DC as shown above. Compare to a BIND server that is working as expected: $ dig bogus. @128.59.59.70 ; <<>> DiG 9.8.1 <<>> bogus. @128.59.59.70 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 30141 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;bogus. IN A ;; AUTHORITY SECTION: . 10800 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2012012501 1800 900 604800 86400 ;; Query time: 18 msec ;; SERVER: 128.59.59.70#53(128.59.59.70) ;; WHEN: Wed Jan 25 14:09:14 2012 ;; MSG SIZE rcvd: 98 Similarly, when I query my Windows DNS server with dig . any, I get a SERVFAIL but the BIND servers return the root zone as expected. This sounds similar to the issue described in http://support.microsoft.com/kb/968372 except I am using two forwarders (128.59.59.70 from above as well as 128.59.62.10) and falling back to root hints so the preconditions to expose the issue are not the same. Nevertheless, I also applied the MaxCacheTTL registry fix as described and restarted DNS and the whole server as well but the problem persists. The problem occurs on all domain controllers in this domain and has occurred since half a year ago, even though the servers are getting automatic Windows updates. EDIT Here is a debug log. The client is 160.39.114.110, which is my workstation. 1/25/2012 2:16:01 PM 0E08 PACKET 000000001EA6BFD0 UDP Rcv 160.39.114.110 2e94 Q [0001 D NOERROR] A (5)bogus(0) UDP question info at 000000001EA6BFD0 Socket = 508 Remote addr 160.39.114.110, port 49710 Time Query=1077016, Queued=0, Expire=0 Buf length = 0x0fa0 (4000) Msg length = 0x0017 (23) Message: XID 0x2e94 Flags 0x0100 QR 0 (QUESTION) OPCODE 0 (QUERY) AA 0 TC 0 RD 1 RA 0 Z 0 CD 0 AD 0 RCODE 0 (NOERROR) QCOUNT 1 ACOUNT 0 NSCOUNT 0 ARCOUNT 0 QUESTION SECTION: Offset = 0x000c, RR count = 0 Name "(5)bogus(0)" QTYPE A (1) QCLASS 1 ANSWER SECTION: empty AUTHORITY SECTION: empty ADDITIONAL SECTION: empty 1/25/2012 2:16:01 PM 0E08 PACKET 000000001EA6BFD0 UDP Snd 160.39.114.110 2e94 R Q [8281 DR SERVFAIL] A (5)bogus(0) UDP response info at 000000001EA6BFD0 Socket = 508 Remote addr 160.39.114.110, port 49710 Time Query=1077016, Queued=0, Expire=0 Buf length = 0x0fa0 (4000) Msg length = 0x0017 (23) Message: XID 0x2e94 Flags 0x8182 QR 1 (RESPONSE) OPCODE 0 (QUERY) AA 0 TC 0 RD 1 RA 1 Z 0 CD 0 AD 0 RCODE 2 (SERVFAIL) QCOUNT 1 ACOUNT 0 NSCOUNT 0 ARCOUNT 0 QUESTION SECTION: Offset = 0x000c, RR count = 0 Name "(5)bogus(0)" QTYPE A (1) QCLASS 1 ANSWER SECTION: empty AUTHORITY SECTION: empty ADDITIONAL SECTION: empty Every option in the debug log box was checked except "filter by IP". By contrast, when I query, say, accounts.google.com, I can see the DNS server go out to its forwarder (128.59.59.70, for example). In this case, I didn't see any packets going out from my DNS server even though bogus. was not in the cache (the debug log was already running and this is the first time I queried this server for bogus. or any TLD). It just returned SERVFAIL without consulting any other DNS server, as in the Microsoft KB article linked above.

  Read the article

• NetApp erroring with: STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT

  - by Sobrique

  Since a sitewide upgrade to Windows 7 on desktop, I've started having a problem with virus checking. Specifically - when doing a rename operation on a (filer hosted) CIFS share. The virus checker seems to be triggering a set of messages on the filer: [filerB: auth.trace.authenticateUser.loginTraceIP:info]: AUTH: Login attempt by user server-wk8-r2$ of domain MYDOMAIN from client machine 10.1.1.20 (server-wk8-r2). [filerB: auth.dc.trace.DCConnection.statusMsg:info]: AUTH: TraceDC- attempting authentication with domain controller \\MYDC. [filerB: auth.trace.authenticateUser.loginRejected:info]: AUTH: Login attempt by user rejected by the domain controller with error 0xc0000199: STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT. [filerB: auth.trace.authenticateUser.loginTraceMsg:info]: AUTH: Delaying the response by 5 seconds due to continuous failed login attempts by user server-wk8-r2$ of domain MYDOMAIN from client machine 10.1.1.20. This seems to specifically trigger on a rename so what we think is going on is the virus checker is seeing a 'new' file, and trying to do an on-access scan. The virus checker - previously running as LocalSystem and thus sending null as it's authentication request is now looking rather like a DOS attack, and causing the filer to temporarily black list. This 5s lock out each 'access attempt' is a minor nuisance most of the time, and really quite significant for some operations - e.g. large file transfers, where every file takes 5s Having done some digging, this seems to be related to NLTM authentication: Symptoms Error message: System error 1808 has occurred. The account used is a computer account. Use your global user account or local user account to access this server. A packet trace of the failure will show the error as: STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT (0xC0000199) Cause Microsoft has changed the functionality of how a Local System account identifies itself during NTLM authentication. This only impacts NTLM authentication. It does not impact Kerberos Authentication. Solution On the host, please set the following group policy entry and reboot the host. Network Security: Allow Local System to use computer identity for NTLM: Disabled Defining this group policy makes Windows Server 2008 R2 and Windows 7 function like Windows Server 2008 SP1. So we've now got a couple of workaround which aren't particularly nice - one is to change this security option. One is to disable virus checking, or otherwise exempt part of the infrastructure. And here's where I come to my request for assistance from ServerFault - what is the best way forwards? I lack Windows experience to be sure of what I'm seeing. I'm not entirely sure why NTLM is part of this picture in the first place - I thought we were using Kerberos authentication. I'm not sure how to start diagnosing or troubleshooting this. (We are going cross domain - workstation machine accounts are in a separate AD and DNS domain to my filer. Normal user authentication works fine however.) And failing that, can anyone suggest other lines of enquiry? I'd like to avoid a site wide security option change, or if I do go that way I'll need to be able to supply detailed reasoning. Likewise - disabling virus checking works as a short term workaround, and applying exclusions may help... but I'd rather not, and don't think that solves the underlying problem. EDIT: Filers in AD ldap have SPNs for: nfs/host.fully.qualified.domain nfs/host HOST/host.fully.qualified.domain HOST/host (Sorry, have to obfuscate those). Could it be that without a 'cifs/host.fully.qualified.domain' it's not going to work? (or some other SPN? ) Edit: As part of the searching I've been doing I've found: http://itwanderer.wordpress.com/2011/04/14/tread-lightly-kerberos-encryption-types/ Which suggests that several encryption types were disabled by default in Win7/2008R2. This might be pertinent, as we've definitely had a similar problem with Keberized NFSv4. There is a hidden option which may help some future Keberos users: options nfs.rpcsec.trace on (This hasn't given me anything yet though, so may just be NFS specific). Edit: Further digging has me tracking it back to cross domain authentication. It looks like my Windows 7 workstation (in one domain) is not getting Kerberos tickets for the other domain, in which my NetApp filer is CIFS joined. I've done this separately against a standalone server (Win2003 and Win2008) and didn't get Kerberos tickets for those either. Which means I think Kerberos might be broken, but I've no idea how to troubleshoot further. Edit: A further update: It looks like this may be down Kerberos tickets not being issued cross domain. This then triggers NTLM fallback, which then runs into this problem (since Windows 7). First port of call will be to investigate the Kerberos side of things, but in neither case do we have anything pointing at the Filer being the root cause. As such - as the storage engineer - it's out of my hands. However, if anyone can point me in the direction of troubleshooting Kerberos spanning two Windows AD domains (Kerberos Realms) then that would be appreciated. Options we're going to be considering for resolution: Amend policy option on all workstations via GPO (as above). Talking to AV vendor about the rename triggering scanning. Talking to AV vendor regarding running AV as service account. investigating Kerberos authentication (why it's not working, whether it should be).

  Read the article

• IIS7 FTP Setup - An error occured during the authentication process. 530 End Login failed

  - by robmzd

  I'm having a problem very similar to IIS 7.5 FTP IIS Manager Users Login Fail (530) on Windows Server 2008 R2 Standard. I have created an FTP site and IIS Manager user but am having trouble logging in. I could really do with getting this working with the IIS Manager user rather than by creating a new system user since I'm fairly restricted with those accounts. Here is the output when connecting locally through command prompt: C:\Windows\system32>ftp localhost Connected to MYSERVER. 220 Microsoft FTP Service User (MYSERVER:(none)): MyFtpLogin 331 Password required for MyFtpLogin. Password: *** 530-User cannot log in. Win32 error: Logon failure: unknown user name or bad password. Error details: An error occured during the authentication process. 530 End Login failed. I have followed the guide to configure ftp with iis manager authentication in iis 7 and Adding FTP Publishing to a Web Site in IIS 7 Things I have done and checked: The FTP Service is installed (along with FTP Extensibility). Local Service and Network Service have been given access to the site folder Permission has been given to the config files Granted read/write permissions to the FTP Root folder The Management Service is installed and running Enable remote connections is ticked with 'Windows credentials or IIS manager credentials' selected The IIS Manager User has been added to the server (root connection in the IIS connections branch) The new FTP site has been added IIS Manager Authentication has been added to the FTP authentication providers The IIS Manager user has been added to the IIS Manager Permissions list for the site Added Read/Write permissions for the user in the FTP Authorization Rules Here's a section of the applicationHost config file associated with the FTP site <site name="MySite" id="8"> <application path="/" applicationPool="MyAppPool"> <virtualDirectory path="/" physicalPath="D:\Websites\MySite" /> </application> <bindings> <binding protocol="http" bindingInformation="*:80:www.mydomain.co.uk" /> <binding protocol="ftp" bindingInformation="*:21:www.mydomain.co.uk" /> </bindings> <ftpServer> <security> <ssl controlChannelPolicy="SslAllow" dataChannelPolicy="SslAllow" /> <authentication> <basicAuthentication enabled="true" /> <customAuthentication> <providers> <add name="IisManagerAuth" enabled="true" /> </providers> </customAuthentication> </authentication> </security> </ftpServer> </site> ... <location path="MySite"> <system.ftpServer> <security> <authorization> <add accessType="Allow" users="MyFtpLogin" permissions="Read, Write" /> </authorization> </security> </system.ftpServer> </location> If I connect to the Site (not FTP) from my local IIS Manager using the same IIS Manager account details then it connects fine, I can browse files and change settings as I would locally (though I don't seem to have an option to upload files). Trying to connect via FTP though either through the browser or FileZilla etc... gives me: Status: Resolving address of www.mydomain.co.uk Status: Connecting to 123.456.12.123:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER MyFtpLogin Response: 331 Password required for MyFtpLogin. Command: PASS ********* Response: 530 User cannot log in. Error: Critical error Error: Could not connect to server I have tried collecting etw traces for ftp sessions, in the logs I get a FailBasicLogon followed by a FailCustomLogon, but no other info: FailBasicLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | ErrorCode=0x8007052E StartCustomLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | LogonProvider=IisManagerAuth StartCallProvider SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | provider=IisManagerAuth EndCallProvider SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} EndCustomLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} FailCustomLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | ErrorCode=0x8007052E FailFtpCommand SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | ReturnValue=0x8007052E | SubStatus=ERROR_DURING_AUTHENTICATION In the normal FTP logs I just get: 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 ControlChannelOpened - - 0 0 e2d4e935-fb31-4f2c-af79-78d75d47c18e - 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 USER MyFtpLogin 331 0 0 e2d4e935-fb31-4f2c-af79-78d75d47c18e - 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 PASS *** 530 1326 41 e2d4e935-fb31-4f2c-af79-78d75d47c18e - 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 ControlChannelClosed - - 0 0 e2d4e935-fb31-4f2c-af79-78d75d47c18e - If anyone has any ideas than I would be very grateful to hear them. Many thanks.

  Read the article

• Server being used to send spam mail. How do I investigate?

  - by split_account

  Problem I think my server is being used to send spam with sendmail, I'm getting a lot of mail being queued up that I don't recognize and my mail.log and syslog are getting huge. I've shutdown sendmail, so none of it is getting out but I can't work out where it's coming from. Investigation so far: I've tried the solution in the blog post below and also shown in this thread. It's meant to add a header from wherever the mail is being added and log all all mail to file, so I changed the following lines in my php.ini file: mail.add_x_header = On mail.log = /var/log/phpmail.log But nothing is appearing in the phpmail.log. I used the command here to investigate cron jobs for all users, but nothing is out of place. The only cron being run is the cron for the website. And then I brought up all php files which had been modified in the last 30 days but none of them look suspicious. What else can I do to find where this is coming from? Mail.log reports Turned sendmail back on for second. Here is a small sample of the reports: Jun 10 14:40:30 ubuntu12 sm-mta[13684]: s5ADeQdp013684: from=<>, size=2431, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jun 10 14:40:30 ubuntu12 sm-msp-queue[13674]: s5ACK1cC011438: to=www-data, delay=01:20:14, xdelay=00:00:00, mailer=relay, pri=571670, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s5ADeQdp013684 Message accepted for delivery) Jun 10 14:40:30 ubuntu12 sm-mta[13719]: s5ADeQdp013684: to=<[email protected]>, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=32683, dsn=2.0.0, stat=Sent Jun 10 14:40:30 ubuntu12 sm-mta[13684]: s5ADeQdr013684: from=<[email protected]>, size=677, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jun 10 14:40:31 ubuntu12 sm-msp-queue[13674]: s5AC0gpi011125: to=www-data, ctladdr=www-data (33/33), delay=01:39:49, xdelay=00:00:01, mailer=relay, pri=660349, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s5ADeQdr013684 Message accepted for delivery) Jun 10 14:40:31 ubuntu12 sm-mta[13721]: s5ADeQdr013684: to=<[email protected]>, ctladdr=<[email protected]> (33/33), delay=00:00:01, xdelay=00:00:00, mailer=local, pri=30946, dsn=2.0.0, stat=Sent Jun 10 14:40:31 ubuntu12 sm-mta[13684]: s5ADeQdt013684: from=<[email protected]>, size=677, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jun 10 14:40:31 ubuntu12 sm-msp-queue[13674]: s5ACF2Nq011240: to=www-data, ctladdr=www-data (33/33), delay=01:25:29, xdelay=00:00:00, mailer=relay, pri=660349, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s5ADeQdt013684 Message accepted for delivery) Jun 10 14:40:31 ubuntu12 sm-mta[13723]: s5ADeQdt013684: to=<[email protected]>, ctladdr=<[email protected]> (33/33), delay=00:00:00, xdelay=00:00:00, mailer=local, pri=30946, dsn=2.0.0, stat=Sent Ju Further Investigation Spotted 4 spam accounts registered in the past day, which is suspicious however all have normal user privileges. There are no contact forms on the site, there are a number of forms and they take either filtered text input or plain text input. Mail is still being queued up having switched the website to maintenance mode, which blocks out everyone but the admin. Ok more investigation, it looks like the email is being send by my websites cron which runs every 5 minutes. However there are no cron jobs I've set-up which run more than once an hour and show on the website log so presumably someone has managed to edit my cron somehow. Copy of email: V8 T1402410301 K1402411201 N2 P120349 I253/1/369045 MDeferred: Connection refused by [127.0.0.1] Fbs $_www-data@localhost ${daemon_flags}c u Swww-data [email protected] MDeferred: Connection refused by [127.0.0.1] C:www-data rRFC822; [email protected] RPFD:www-data H?P?Return-Path: <?g> H??Received: (from www-data@localhost) by ubuntu12.pcsmarthosting.co.uk (8.14.4/8.14.4/Submit) id s5AEP13T015507 for www-data; Tue, 10 Jun 2014 15:25:01 +0100 H?D?Date: Tue, 10 Jun 2014 15:25:01 +0100 H?x?Full-Name: CronDaemon H?M?Message-Id: <[email protected]> H??From: root (Cron Daemon) H??To: www-data H??Subject: Cron <www-data@ubuntu12> /usr/bin/drush @main elysia-cron H??Content-Type: text/plain; charset=ANSI_X3.4-1968 H??X-Cron-Env: <PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin> H??X-Cron-Env: <COLUMNS=80> H??X-Cron-Env: <SHELL=/bin/sh> H??X-Cron-Env: <HOME=/var/www> H??X-Cron-Env: <LOGNAME=www-data>

  Read the article

• Windows 7 cannot join samba domain

  - by Antonis Christofides

  I have a 3.5.6 samba server with a LDAP backend (both on Debian 6.0). I've been successfully adding Windows XP machines to the domain for years. I now try to add Windows 7. I have made the recommended registry changes, but I don't have any success so far. Here is what happens: 1. I go to computer name, select "Domain" instead of "Workgroup", type in the domain name, click OK. It asks me for the username and password of an account that can add computers to the domain; I enter them. After about 40 seconds, I get the following message: The following error occurred attempting to join the domain "ITIA": The specified computer account could not be found. Contact an administrator to verify the account is in the domain. If the account has been deleted unjoin, reboot, and rejoin the domain. Despite this, the samba server successfully creates the computer account. 2. Therefore, if I try again a second time, without deleting the already created computer account, I get a different error: The following error occurred attempting to join the domain "ITIA": The specified account already exists. (Note that until a while ago samba wasn't configured to automatically create computer accounts. What I did whenever I wanted an XP to join was to manually create it. When I first attempted to solve the Windows 7 join problem, I setup samba to do this automatically, as this is what most people do, as I understand, and I thought that it might be related. I haven't attempted to add an XP since I made this change, so I don't know if it works, but whether it works or not, the problem remains.) Update 1: Here are the relevant parts of smb.conf: [global] panic action = /usr/share/samba/panic-action %d workgroup = ITIA server string = Itia file server announce as = NT interfaces = 147.102.160.1 volume = %h passdb backend = ldapsam:ldap://ldap.itia.ntua.gr:389 ldap admin dn = uid=samba,ou=daemons,dc=itia,dc=ntua,dc=gr ldap ssl = off ldap suffix = dc=itia,dc=ntua,dc=gr ldap user suffix = ou=people ldap group suffix = ou=groups ldap machine suffix = ou=computers unix password sync = no add machine script = smbldap-useradd -w -i %u log file = /var/log/samba/samba-log.all log level = 3 max log size = 5000 syslog = 2 socket options = SO_KEEPALIVE TCP_NODELAY encrypt passwords = true password level = 1 security = user domain master = yes local master = no wins support = yes domain logons = yes idmap gid = 1000-2000 Update 2: The server has a single network interface eth1 (also an unused eth0 that shows up only in the kernel boot messages) and two ip addresses; the main, 147.102.160.1, and an additional one, 147.102.160.37, that comes up with "ip addr add 147.102.160.37/32 dev eth1" (used only for a web site that has a different certificate than other web sites served from the same machine). One of the problems I recently faced was that samba was using the latter IP address. I fixed that by adding the "interfaces = 147.102.160.1" statement in smb.conf. Now: acheloos:/etc/apache2# tcpdump host 147.102.160.40 and not port 5900 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:13:56.549048 IP lithaios.itia.civil.ntua.gr.netbios-dgm > 147.102.160.255.netbios-dgm: NBT UDP PACKET(138) 13:13:56.549056 ARP, Request who-has acheloos2.itia.civil.ntua.gr tell lithaios.itia.civil.ntua.gr, length 46 13:13:56.549091 ARP, Reply acheloos2.itia.civil.ntua.gr is-at 00:10:4b:b4:9e:59 (oui Unknown), length 28 13:13:56.549324 IP acheloos.itia.civil.ntua.gr.netbios-dgm > lithaios.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.549608 IP lithaios.itia.civil.ntua.gr.netbios-dgm > acheloos2.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.549741 IP acheloos.itia.civil.ntua.gr.netbios-dgm > lithaios.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.550364 IP lithaios.itia.civil.ntua.gr.netbios-dgm > acheloos.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.550468 IP acheloos.itia.civil.ntua.gr.netbios-dgm > lithaios.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) (acheloos2 is the second IP address, 147.102.160.37). The above dump occurs when I click "OK" (to join the domain), until it asks me for the username and password of a user that can join the domain. I don't know why the client is contacting the second IP address. I tried temporarily deactivating it, but I still had some related ARP traffic (though I think not IP traffic).

  Read the article

• CSC folder data access AND roaming profiles issues (Vista with Server 2003, then 2008)

  - by Alex Jones

  I'm a junior sysadmin for an IT contractor that helps small, local government agencies, like little towns and the like. One of our clients, a public library with ~ 50 staff users, was recently migrated from Server 2003 Standard to Server 2008 R2 Standard in a very short timeframe; our senior employee, the only network engineer, had suddenly put in his two weeks notice, so management pushed him to do this project before quitting. A bit hasty on management's part? Perhaps. Could we do anything about that? Nope. Do I have to fix this all by myself? Pretty much. The network is set up like this: a) 50ish staff workstations, all running Vista Business SP2. All staff use MS Outlook, which uses RPC-over-HTTPS ("Outlook Anywhere") for cached Exchange access to an offsite location. b) One new (virtualized) Server 2008 R2 Standard instance, running atop a Server 2008 R2 host via Hyper-V. The VM is the domain's DC, and also the site's one and only file server. Let's call that VM "NEWBOX". c) One old physical Server 2003 Standard server, running the same roles. Let's call it "OLDBOX". It's still on the network and accessible, but it's been demoted, and its shares have been disabled. No data has been deleted. c) Gigabit Ethernet everywhere. The organization's only has one domain, and it did not change during the migration. d) Most users were set up for a combo of redirected folders + offline files, but some older employees who had been with the organization a long time are still on roaming profiles. To sum up: the servers in question handle user accounts and files, nothing else (eg, no TS, no mail, no IIS, etc.) I have two major problems I'm hoping you can help me with: 1) Even though all domain users have had their redirected folders moved to the new server, and loggin in to their workstations and testing confirms that the Documents/Music/Whatever folders point to the new paths, it appears some users (not laptops or anything either!) had been working offline from OLDBOX for a long time, and nobody realized it. Here's the ugly implication: a bunch of their data now lives only in their CSC folders, because they can't access the share on OLDBOX and sync with it finally. How do I get this data out of those CSC folders, and onto NEWBOX? 2) What's the best way to migrate roaming profile users to non-roaming ones, without losing vital data like documents, any lingering PSTs, etc? Things I've thought about trying: For problem 1: a) Reenable the documents share on OLDBOX, force an Offline Files sync for ALL domain users, then copy OLDBOX's share's data to the equivalent share on NEWBOX. Reinitialize the Offline Files cache for every user. With this: How do I safely force a domain-wide Offline Files sync? Could I lose data by reenabling the share on OLDBOX and forcing the sync? Afterwards, how can I reinitialize the Offline Files cache for every user, without doing it manually, workstation by workstation? b) Determine which users have unsynced changes to OLDBOX (again, how?), search each user's CSC folder domain-wide via workstation admin shares, and grab the unsynched data. Reinitialize the Offline Files cache for every user. With this: How can I detect which users have unsynched changes with a script? How can I search each user's CSC folder, when the ownership and permissions set for CSC folders are so restrictive? Again, afterwards, how can I reinitialize the Offline Files cache for every user, without doing it manually, workstation by workstation? c) Manually visit each workstation, copy the contents of the CSC folder, and manually copy that data onto NEWBOX. Reinitialize the Offline Files cache for every user. With this: Again, how do I 'break into' the CSC folder and get to its data? As an experiment, I took one workstation's HD offsite, imaged it for safety, and then tried the following with one of our shop PCs, after attaching the drive: grant myself full control of the folder (failed), grant myself ownership of the folder (failed), run chkdsk on the whole drive to make sure nothing's messed up (all OK), try to take full control of the entire drive (failed), try to take ownership of the entire drive (failed) MS KB articles and Googling around suggests there's a utility called CSCCMD that's meant for this exact scenario...but it looks like it's available for XP, not Vista, no? Again, afterwards, how can I reinitialize the Offline Files cache for every user, without doing it manually, workstation by workstation? For problem 2: a) Figure out which users are on roaming profiles, and where their profiles 'live' on the server. Create new folders for them in the redirected folders repository, migrate existing data, and disable the roaming. With this: Finding out who's roaming isn't hard. But what's the best way to disable the roaming itself? In AD Users and Computers, or on each user's workstation? Doing it centrally on the server seems more efficient; that said, all of the KB research I've done turns up articles on how to go from local to roaming, not the other way around, so I don't have good documentation on this. In closing: we have good backups of NEWBOX and OLDBOX, but not of the workstations themselves, so anything drastic on the client side would need imaging and testing for safety. Thanks for reading along this far! Hopefully you can help me dig us out of this mess.

  Read the article

• Forms Authentication works on dev server but not production server (same SQL db)

  - by Desmond

  Hi, I have the same problem as a previously solved question however, this solution did not help me. I have posted the previous question and answer below: http://stackoverflow.com/questions/2215963/forms-authentication-works-on-dev-server-but-not-production-server-same-sql-db/2963985#2963985 Question: I've never had this problem before, I'm at a total loss. I have a SQL Server 2008 database with ASP.NET Forms Authentication, profiles and roles created and is functional on the development workstation. I can login using the created users without problem. I back up the database on the development computer and restore it on the production server. I xcopy the DLLs and ASP.NET files to the server. I make the necessary changes in the web.config, changing the SQL connection strings to point to the production server database and upload it. I've made sure to generate a machine key and it is the same on both the development web.config and the production web.config. And yet, when I try to login on the production server, the same user that I'm able to login successfully with on the development computer, fails on the production server. There is other content in the database, the schema generated by FluentNHibernate. This content is able to be queried successfully on both development and production servers. This is mind boggling, I believe I've verified everything, but obviously it is still not working and I must have missed something. Please, any ideas? Answer: I ran into a problem with similar symptoms at one point by forgetting to set the applicationName attribute in the web.config under the membership providers element. Users are associated to a specific application. Since I didn't set the applicationName, it defaulted to the application path (something like "/MyApplication"). When it was moved to production, the path changed (for example to "/WebSiteFolder/SomeSubFolder /MyApplication"), so the application name defaulted to the new production path and an association could not be made to the original user accounts that were set up in development. Could your issues possibly be the same as mine? I have this already in my web.config but still get the issue. Any ideas? <membership> <providers> <clear/> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" passwordStrengthRegularExpression="" applicationName="/"/> </providers> </membership> <profile> <providers> <clear/> <add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" applicationName="/"/> </providers> </profile> <roleManager enabled="false"> <providers> <clear/> <add connectionStringName="ApplicationServices" applicationName="/" name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> <add applicationName="/" name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> </providers> </roleManager> Any help is greatly appriciated.

  Read the article

• Google App Engine - Secure Cookies

  - by tponthieux

  I'd been searching for a way to do cookie based authentication/sessions in Google App Engine because I don't like the idea of memcache based sessions, and I also don't like the idea of forcing users to create google accounts just to use a website. I stumbled across someone's posting that mentioned some signed cookie functions from the Tornado framework and it looks like what I need. What I have in mind is storing a user's id in a tamper proof cookie, and maybe using a decorator for the request handlers to test the authentication status of the user, and as a side benefit the user id will be available to the request handler for datastore work and such. The concept would be similar to forms authentication in ASP.NET. This code comes from the web.py module of the Tornado framework. According to the docstrings, it "Signs and timestamps a cookie so it cannot be forged" and "Returns the given signed cookie if it validates, or None." I've tried to use it in an App Engine Project, but I don't understand the nuances of trying to get these methods to work in the context of the request handler. Can someone show me the right way to do this without losing the functionality that the FriendFeed developers put into it? The set_secure_cookie, and get_secure_cookie portions are the most important, but it would be nice to be able to use the other methods as well. #!/usr/bin/env python import Cookie import base64 import time import hashlib import hmac import datetime import re import calendar import email.utils import logging def _utf8(s): if isinstance(s, unicode): return s.encode("utf-8") assert isinstance(s, str) return s def _unicode(s): if isinstance(s, str): try: return s.decode("utf-8") except UnicodeDecodeError: raise HTTPError(400, "Non-utf8 argument") assert isinstance(s, unicode) return s def _time_independent_equals(a, b): if len(a) != len(b): return False result = 0 for x, y in zip(a, b): result |= ord(x) ^ ord(y) return result == 0 def cookies(self): """A dictionary of Cookie.Morsel objects.""" if not hasattr(self,"_cookies"): self._cookies = Cookie.BaseCookie() if "Cookie" in self.request.headers: try: self._cookies.load(self.request.headers["Cookie"]) except: self.clear_all_cookies() return self._cookies def _cookie_signature(self,*parts): self.require_setting("cookie_secret","secure cookies") hash = hmac.new(self.application.settings["cookie_secret"], digestmod=hashlib.sha1) for part in parts:hash.update(part) return hash.hexdigest() def get_cookie(self,name,default=None): """Gets the value of the cookie with the given name,else default.""" if name in self.cookies: return self.cookies[name].value return default def set_cookie(self,name,value,domain=None,expires=None,path="/", expires_days=None): """Sets the given cookie name/value with the given options.""" name = _utf8(name) value = _utf8(value) if re.search(r"[\x00-\x20]",name + value): # Don't let us accidentally inject bad stuff raise ValueError("Invalid cookie %r:%r" % (name,value)) if not hasattr(self,"_new_cookies"): self._new_cookies = [] new_cookie = Cookie.BaseCookie() self._new_cookies.append(new_cookie) new_cookie[name] = value if domain: new_cookie[name]["domain"] = domain if expires_days is not None and not expires: expires = datetime.datetime.utcnow() + datetime.timedelta( days=expires_days) if expires: timestamp = calendar.timegm(expires.utctimetuple()) new_cookie[name]["expires"] = email.utils.formatdate( timestamp,localtime=False,usegmt=True) if path: new_cookie[name]["path"] = path def clear_cookie(self,name,path="/",domain=None): """Deletes the cookie with the given name.""" expires = datetime.datetime.utcnow() - datetime.timedelta(days=365) self.set_cookie(name,value="",path=path,expires=expires, domain=domain) def clear_all_cookies(self): """Deletes all the cookies the user sent with this request.""" for name in self.cookies.iterkeys(): self.clear_cookie(name) def set_secure_cookie(self,name,value,expires_days=30,**kwargs): """Signs and timestamps a cookie so it cannot be forged""" timestamp = str(int(time.time())) value = base64.b64encode(value) signature = self._cookie_signature(name,value,timestamp) value = "|".join([value,timestamp,signature]) self.set_cookie(name,value,expires_days=expires_days,**kwargs) def get_secure_cookie(self,name,include_name=True,value=None): """Returns the given signed cookie if it validates,or None""" if value is None:value = self.get_cookie(name) if not value:return None parts = value.split("|") if len(parts) != 3:return None if include_name: signature = self._cookie_signature(name,parts[0],parts[1]) else: signature = self._cookie_signature(parts[0],parts[1]) if not _time_independent_equals(parts[2],signature): logging.warning("Invalid cookie signature %r",value) return None timestamp = int(parts[1]) if timestamp < time.time() - 31 * 86400: logging.warning("Expired cookie %r",value) return None try: return base64.b64decode(parts[0]) except: return None uid=1234|1234567890|d32b9e9c67274fa062e2599fd659cc14 Parts: 1. uid is the name of the key 2. 1234 is your value in clear 3. 1234567890 is the timestamp 4. d32b9e9c67274fa062e2599fd659cc14 is the signature made from the value and the timestamp

  Read the article

• What precautions should you take when a senior employee leaves?

  - by Mahin

  EDIT : I agree one should check the reasons, why a senior level employee is leaving. But I am interested in knowing the official/management/technical/legal steps one should take after its decided that he is leaving, so that the life after him is smooth. What are the steps management should take when a senior programmer/team lead leaves your company. Some of them which I have thought about are : 1) If He used to manage hosting and domains stuff, change passwords of domain control panels and hosting panels. 2) If your published web sites have maintenance account and he is aware of credentials of that account then change this details also. 3) Suspend mail account for some time and forward all eMails of that account to some ex-employee account. After some time close that account. What are the other things one should check. I am expecting the answer to be a general check list one should follow. It should include both technical scenarios and management scenarios. Notable Suggestions so far : Effectively transfer the responsibilities of that employee to another one without causing any potential delay in your work. Protect your source code. If possible Make them to sign something to say that they don't have copies of source code.. You can also consider NDA here. Use the Notice Period to train his replacement. Now any new code to the project will be done by replacement with the help of Guy who is leaving. Ask him to create a document of things he thinks you should know. Make sure he checks everything in now and then any checkout will only be done by the replacement. Emails, copy off his email account to a pst.file (this assumes Outlook), Make this file available to his replacement. the employee should probably be given a chance to scrub the email. if you are going to keep his account open for whatever reason, check that no rules are created that forward incoming emails to an alternate address. Copy the hard drive of his computer to a network location and have someone senior go through and see if there are any files (drafts of performance reviews or other sensitive issues ) on it that someone else might need. Clearance from Accounts,Finance,Security,Library etc departments.Obtain all company property, laptops, keys, etc. If there is no reason not to, you should reward a departing person for their many years of service. Write them letters of recommendation (even if they already have a new job lined up).Say goodbye, and keep the door open. Make sure any outside clients know that the departing employee is not their main contact anymore. Never neglect the exit interview/debriefing. Confirm the last day of employment so that there is no misunderstanding Inform H/R if the employee is on H1B status, there is paperwork required to notify the government when an H1B employee leaves. Depending on how senior / what position, you might spend some time convincing him not to take the rest of the engineering staff with him. Make sure he spends his last days on a good note, because if he is not leaving on a good note, he can easily pollute the mind of his colleagues. Best Regards, Mahin Gupta EDIT : Now offered a bounty on it to get more detailed responses and practical suggestions.

  Read the article

• Xcode - "Preference Pane" project - how to access bundle?

  - by Nippysaurus

  I have created a "Preference Pane" project. In this project I would like to load an image from my bundles resources folder. This seems difficult because "[NSBundle mainBundle]" seems to return the following: 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </Applications/System Preferences.app> (loaded) Iterating through "[NSBundle allBundles]" reveals that my projects bundle appears, but does not appear to be loaded: 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Mouse.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Sound.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Spotlight.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/TimeMachine.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </Library/PreferencePanes/DivX.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Trackpad.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/UniversalAccessPref.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Dock.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/DateAndTime.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Keyboard.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/MobileMe.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/FibreChannel.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Appearance.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/DigiHubDiscs.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Ink.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Security.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/EnergySaver.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Speech.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </Users/michael/Library/PreferencePanes/MyPrefPane.prefPane> (loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </Users/michael/Code/MyPrefPane/build/Debug/MyPrefPane.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/SharingPref.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Expose.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/SoftwareUpdate.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/ParentalControls.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/PrintAndFax.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Accounts.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/DesktopScreenEffectsPref.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Bluetooth.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Localization.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/StartupDisk.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Network.prefPane> (not yet loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </Applications/System Preferences.app> (loaded) 27/12/10 9:24:18 PM System Preferences[5076] NSBundle </System/Library/PreferencePanes/Displays.prefPane> (not yet loaded) I'm not sure whats going on here. How can I access my prefpane bundle?

  Read the article

• How do I explain this to potential employers?

  - by ReferencelessBob

  Backstory: TL;DR: I've gained a lot of experience working for 5 years at one startup company, but it eventually failed. The company is gone and the owner MIA. When I left sixth-form college I didn't want to start a degree straight away, so when I met this guy who knew a guy who was setting up a publishing company and needed a 'Techie' I thought why not. It was a very small operation, he sent mailings to schools, waited for orders to start arriving, then ordered a short run of the textbooks to be printed, stuck them in an envelope posted them out. I was initially going to help him set up a computerized system for recording orders and payments, printing labels, really basic stuff and I threw it together in Access in a couple of weeks. He also wanted to start taking orders online, so I set up a website and a paypal business account. While I was doing this, I was also helping to do the day-to-day running of things, taking phone orders, posting products, banking cheques, ordering textbooks, designing mailings, filing end of year accounts, hiring extra staff, putting stamps on envelopes. I learned so much about things I didn't even know I needed to learn about. Things were pretty good, when I started we sold about £10,000 worth of textbooks and by my 4th year there we sold £250,000 worth of text books. Things were looking good, but we had a problem. Our best selling product had peaked and sales started to fall sharply, we introduced add on products through the website to boost sales which helped for a while, but we had simply saturated the market. Our plan was to enter the US with our star product and follow the same, slightly modified, plan as before. We setup a 1-866 number and had the calls forwarded to our UK offices. We contracted a fulfillment company, shipped over a few thousand textbooks, had a mailing printed and mailed, then sat by the phones and waited. Needless to say, it didn't work. We tried a few other things, at home and in the US, but nothing helped. We expanded in the good times, moving into bigger offices, taking on staff to do administrative and dispatch work, but now cashflow was becoming a problem and things got tougher. We did the only thing we could and scaled things right back, the offices went, the admin staff went, I stopped taking a wage and started working from home. Nothing helped. The business was wound up about about 2 years ago. In the end it turned out that the owner had built up considerable debt at the start of business and had not paid them off during good years, which left him in a difficult position when cashflow had started to dry up. I haven't been able to contact the owner since I found out. It took me a while to get back on my feet after that, but I'm now at University and doing a Computer Science degree. How do I show the experience I have without having to get into all the gory details of what happened?

  Read the article

• Is this PHP/MySQL login script secure?

  - by NightMICU

  Greetings, A site I designed was compromised today, working on damage control at the moment. Two user accounts, including the primary administrator, were accessed without authorization. Please take a look at the log-in script that was in use, any insight on security holes would be appreciated. I am not sure if this was an SQL injection or possibly breach on a computer that had been used to access this area in the past. Thanks <?php //Start session session_start(); //Include DB config require_once('config.php'); //Error message array $errmsg_arr = array(); $errflag = false; //Connect to mysql server $link = mysql_connect(DB_HOST, DB_USER, DB_PASSWORD); if(!$link) { die('Failed to connect to server: ' . mysql_error()); } //Select database $db = mysql_select_db(DB_DATABASE); if(!$db) { die("Unable to select database"); } //Function to sanitize values received from the form. Prevents SQL injection function clean($str) { $str = @trim($str); if(get_magic_quotes_gpc()) { $str = stripslashes($str); } return mysql_real_escape_string($str); } //Sanitize the POST values $login = clean($_POST['login']); $password = clean($_POST['password']); //Input Validations if($login == '') { $errmsg_arr[] = 'Login ID missing'; $errflag = true; } if($password == '') { $errmsg_arr[] = 'Password missing'; $errflag = true; } //If there are input validations, redirect back to the login form if($errflag) { $_SESSION['ERRMSG_ARR'] = $errmsg_arr; session_write_close(); header("location: http://tapp-essexvfd.org/admin/index.php"); exit(); } //Create query $qry="SELECT * FROM user_control WHERE username='$login' AND password='".md5($_POST['password'])."'"; $result=mysql_query($qry); //Check whether the query was successful or not if($result) { if(mysql_num_rows($result) == 1) { //Login Successful session_regenerate_id(); //Collect details about user and assign session details $member = mysql_fetch_assoc($result); $_SESSION['SESS_MEMBER_ID'] = $member['user_id']; $_SESSION['SESS_USERNAME'] = $member['username']; $_SESSION['SESS_FIRST_NAME'] = $member['name_f']; $_SESSION['SESS_LAST_NAME'] = $member['name_l']; $_SESSION['SESS_STATUS'] = $member['status']; $_SESSION['SESS_LEVEL'] = $member['level']; //Get Last Login $_SESSION['SESS_LAST_LOGIN'] = $member['lastLogin']; //Set Last Login info $qry = "UPDATE user_control SET lastLogin = DATE_ADD(NOW(), INTERVAL 1 HOUR) WHERE user_id = $member[user_id]"; $login = mysql_query($qry) or die(mysql_error()); session_write_close(); if ($member['level'] != "3" || $member['status'] == "Suspended") { header("location: http://members.tapp-essexvfd.org"); //CHANGE!!! } else { header("location: http://tapp-essexvfd.org/admin/admin_main.php"); } exit(); }else { //Login failed header("location: http://tapp-essexvfd.org/admin/index.php"); exit(); } }else { die("Query failed"); } ?>

  Read the article

• Is the Unix Philosophy still relevant in the Web 2.0 world?

  - by David Titarenco

  Introduction Hello, let me give you some background before I begin. I started programming when I was 5 or 6 on my dad's PSION II (some primitive BASIC-like language), then I learned more and more, eventually inching my way up to C, C++, Java, PHP, JS, etc. I think I'm a pretty decent coder. I think most people would agree. I'm not a complete social recluse, but I do stuff like write a virtual machine for fun. I've never taken a computer course in college because I've been in and out for the past couple of years and have only been taking core classes; never having been particularly amazing at school, perhaps I'm missing some basic tenet that most learn in CS101. I'm currently reading Coders at Work and this question is based on some ideas I read in there. A Brief (Fictionalized) Example So a certain sunny day I get an idea. I hire a designer and hammer away at some C/C++ code for a couple of months, soon thereafter releasing silvr.com, a website that transmutes lead into silver. Yep, I started my very own start-up and even gave it a clever web 2.0 name with a vowel missing. Mom and dad are proud. I come up with some numbers I should be seeing after 1, 2, 3, 6, 9, 12 months and set sail. Obviously, my transmuting server isn't perfect, sometimes it segfaults, sometimes it leaks memory. I fix it and keep truckin'. After all, gdb is my best friend. Eventually, I'm at a position where a very small community of people are happily transmuting lead into silver on a semi-regular basis, but they want to let their friends on MySpace know how many grams of lead they transmuted today. And they want to post images of their lead and silver nuggets on flickr. I'm losing out on potential traffic unless I let them log in with their Yahoo, Google, and Facebook accounts. They want webcam support and live cock fighting, merry-go-rounds and Jabberwockies. All these things seem necessary. The Aftermath Of course, I have to re-write the transmuting server! After all, I've been losing money all these months. I need OAuth libraries and OpenID libraries, JSON support, and the only stable Jabberwocky API is for Java. C++ isn't even an option anymore. I'm just one guy! The Java binary just grows and grows since I need some legacy Apache include for the JSON library, and some antiquated Sun dependency for OAuth support. Then I pick up a book like Coders at Work and read what people like jwz say about complexity... I think to myself.. Keep it simple, stupid. I like simple things. I've always loved the Unix Philosophy but even after trying to keep the new server source modular and sleek, I loathe having to write one more line of code. It feels that I'm just piling crap on top of other crap. Maybe I'm naive thinking every piece of software can be simple and clever. Maybe it's just a phase.. or is the Unix Philosophy basically dead when it comes to the current state of (web) development? I'm just kind of disheartened :(

  Read the article

• Error data: line 2 column 1 when using pycurl with gzip stream

  - by Sagar Hatekar

  Thanks for reading. Background: I am trying to read a streaming API feed that returns data in JSON format, and then storing this data to a pymongo collection. The streaming API requires a "Accept-Encoding" : "Gzip" header. What's happening: Code fails on json.loads and outputs - Extra data: line 2 column 1 - line 4 column 1 (char 1891 - 5597) (Refer Error Log below) This does NOT happen while parsing every JSON object - it happens at random. My guess is I am encountering some weird JSON object after every "x" proper JSON objects. I did reference how to use pycurl if requested data is sometimes gzipped, sometimes not? and Encoding error while deserializing a json object from Google but so far have been unsuccessful at resolving this error. Could someone please help me out here? Error Log: Note: The raw dump of the JSON object below is basically using the repr() method. '{"id":"tag:search.twitter.com,2005:207958320747782146","objectType":"activity","actor":{"objectType":"person","id":"id:twitter.com:493653150","link":"http://www.twitter.com/Deathnews_7_24","displayName":"Death News 7/24","postedTime":"2012-02-16T01:30:12.000Z","image":"http://a0.twimg.com/profile_images/1834408513/deathnewstwittersquare_normal.jpg","summary":"Crashes, Murders, Suicides, Accidents, Crime and Naturals Death News From All Around World","links":[{"href":"http://www.facebook.com/DeathNews724","rel":"me"}],"friendsCount":56,"followersCount":14,"listedCount":1,"statusesCount":1029,"twitterTimeZone":null,"utcOffset":null,"preferredUsername":"Deathnews_7_24","languages":["tr"]},"verb":"post","postedTime":"2012-05-30T22:15:02.000Z","generator":{"displayName":"web","link":"http://twitter.com"},"provider":{"objectType":"service","displayName":"Twitter","link":"http://www.twitter.com"},"link":"http://twitter.com/Deathnews_7_24/statuses/207958320747782146","body":"Kathi Kamen Goldmark, Writers\xe2\x80\x99 Catalyst, Dies at 63 http://t.co/WBsNlNtA","object":{"objectType":"note","id":"object:search.twitter.com,2005:207958320747782146","summary":"Kathi Kamen Goldmark, Writers\xe2\x80\x99 Catalyst, Dies at 63 http://t.co/WBsNlNtA","link":"http://twitter.com/Deathnews_7_24/statuses/207958320747782146","postedTime":"2012-05-30T22:15:02.000Z"},"twitter_entities":{"urls":[{"display_url":"nytimes.com/2012/05/30/boo\xe2\x80\xa6","indices":[52,72],"expanded_url":"http://www.nytimes.com/2012/05/30/books/kathi-kamen-goldmark-writers-catalyst-dies-at-63.html","url":"http://t.co/WBsNlNtA"}],"hashtags":[],"user_mentions":[]},"gnip":{"language":{"value":"en"},"matching_rules":[{"value":"url_contains: nytimes.com","tag":null}],"klout_score":11,"urls":[{"url":"http://t.co/WBsNlNtA","expanded_url":"http://www.nytimes.com/2012/05/30/books/kathi-kamen-goldmark-writers-catalyst-dies-at-63.html?_r=1"}]}}\r\n{"id":"tag:search.twitter.com,2005:207958321003638785","objectType":"activity","actor":{"objectType":"person","id":"id:twitter.com:178760897","link":"http://www.twitter.com/Mobanu","displayName":"Donald Ochs","postedTime":"2010-08-15T16:33:56.000Z","image":"http://a0.twimg.com/profile_images/1493224811/small_mobany_Logo_normal.jpg","summary":"","links":[{"href":"http://www.mobanuweightloss.com","rel":"me"}],"friendsCount":10272,"followersCount":9698,"listedCount":30,"statusesCount":725,"twitterTimeZone":"Mountain Time (US & Canada)","utcOffset":"-25200","preferredUsername":"Mobanu","languages":["en"],"location":{"objectType":"place","displayName":"Crested Butte, Colorado"}},"verb":"post","postedTime":"2012-05-30T22:15:02.000Z","generator":{"displayName":"twitterfeed","link":"http://twitterfeed.com"},"provider":{"objectType":"service","displayName":"Twitter","link":"http://www.twitter.com"},"link":"http://twitter.com/Mobanu/statuses/207958321003638785","body":"Mobanu: Can Exercise Be Bad for You?: Researchers have found evidence that some people who exercise do worse on ... http://t.co/mTsQlNQO","object":{"objectType":"note","id":"object:search.twitter.com,2005:207958321003638785","summary":"Mobanu: Can Exercise Be Bad for You?: Researchers have found evidence that some people who exercise do worse on ... http://t.co/mTsQlNQO","link":"http://twitter.com/Mobanu/statuses/207958321003638785","postedTime":"2012-05-30T22:15:02.000Z"},"twitter_entities":{"urls":[{"display_url":"nyti.ms/KUmmMa","indices":[116,136],"expanded_url":"http://nyti.ms/KUmmMa","url":"http://t.co/mTsQlNQO"}],"hashtags":[],"user_mentions":[]},"gnip":{"language":{"value":"en"},"matching_rules":[{"value":"url_contains: nytimes.com","tag":null}],"klout_score":12,"urls":[{"url":"http://t.co/mTsQlNQO","expanded_url":"http://well.blogs.nytimes.com/2012/05/30/can-exercise-be-bad-for-you/?utm_medium=twitter&utm_source=twitterfeed"}]}}\r\n' json exception: Extra data: line 2 column 1 - line 4 column 1 (char 1891 - 5597) Header Output: HTTP/1.1 200 OK Content-Type: application/json; charset=UTF-8 Vary: Accept-Encoding Date: Wed, 30 May 2012 22:14:48 UTC Connection: close Transfer-Encoding: chunked Content-Encoding: gzip get_stream.py: #!/usr/bin/env python import sys import pycurl import json import pymongo STREAM_URL = "https://stream.test.com:443/accounts/publishers/twitter/streams/track/Dev.json" AUTH = "userid:passwd" DB_HOST = "127.0.0.1" DB_NAME = "stream_test" class StreamReader: def __init__(self): try: self.count = 0 self.buff = "" self.mongo = pymongo.Connection(DB_HOST) self.db = self.mongo[DB_NAME] self.raw_tweets = self.db["raw_tweets_gnip"] self.conn = pycurl.Curl() self.conn.setopt(pycurl.ENCODING, 'gzip') self.conn.setopt(pycurl.URL, STREAM_URL) self.conn.setopt(pycurl.USERPWD, AUTH) self.conn.setopt(pycurl.WRITEFUNCTION, self.on_receive) self.conn.setopt(pycurl.HEADERFUNCTION, self.header_rcvd) while True: self.conn.perform() except Exception as ex: print "error ocurred : %s" % str(ex) def header_rcvd(self, header_data): print header_data def on_receive(self, data): temp_data = data self.buff += data if data.endswith("\r\n") and self.buff.strip(): try: tweet = json.loads(self.buff, encoding = 'UTF-8') self.buff = "" if tweet: try: self.raw_tweets.insert(tweet) except Exception as insert_ex: print "Error inserting tweet: %s" % str(insert_ex) self.count += 1 if self.count % 10 == 0: print "inserted "+str(self.count)+" tweets" except Exception as json_ex: print "json exception: %s" % str(json_ex) print repr(temp_data) stream = StreamReader()

  Read the article

• Code golf: Word frequency chart

  - by ChristopheD

  The challenge: Build an ASCII chart of the most commonly used words in a given text. The rules: Only accept a-z and A-Z (alphabetic characters) as part of a word. Ignore casing (She == she for our purpose). Ignore the following words (quite arbitary, I know): the, and, of, to, a, i, it, in, or, is Clarification: considering don't: this would be taken as 2 different 'words' in the ranges a-z and A-Z: (don and t). Optionally (it's too late to be formally changing the specifications now) you may choose to drop all single-letter 'words' (this could potentially make for a shortening of the ignore list too). Parse a given text (read a file specified via command line arguments or piped in; presume us-ascii) and build us a word frequency chart with the following characteristics: Display the chart (also see the example below) for the 22 most common words (ordered by descending frequency). The bar width represents the number of occurences (frequency) of the word (proportionally). Append one space and print the word. Make sure these bars (plus space-word-space) always fit: bar + [space] + word + [space] should be always <= 80 characters (make sure you account for possible differing bar and word lenghts: e.g.: the second most common word could be a lot longer then the first while not differing so much in frequency). Maximize bar width within these constraints and scale the bars appropriately (according to the frequencies they represent). An example: The text for the example can be found here (Alice's Adventures in Wonderland, by Lewis Carroll). This specific text would yield the following chart: _________________________________________________________________________ |_________________________________________________________________________| she |_______________________________________________________________| you |____________________________________________________________| said |____________________________________________________| alice |______________________________________________| was |__________________________________________| that |___________________________________| as |_______________________________| her |____________________________| with |____________________________| at |___________________________| s |___________________________| t |_________________________| on |_________________________| all |______________________| this |______________________| for |______________________| had |_____________________| but |____________________| be |____________________| not |___________________| they |__________________| so For your information: these are the frequencies the above chart is built upon: [('she', 553), ('you', 481), ('said', 462), ('alice', 403), ('was', 358), ('that ', 330), ('as', 274), ('her', 248), ('with', 227), ('at', 227), ('s', 219), ('t' , 218), ('on', 204), ('all', 200), ('this', 181), ('for', 179), ('had', 178), (' but', 175), ('be', 167), ('not', 166), ('they', 155), ('so', 152)] A second example (to check if you implemented the complete spec): Replace every occurence of you in the linked Alice in Wonderland file with superlongstringstring: ________________________________________________________________ |________________________________________________________________| she |_______________________________________________________| superlongstringstring |_____________________________________________________| said |______________________________________________| alice |________________________________________| was |_____________________________________| that |______________________________| as |___________________________| her |_________________________| with |_________________________| at |________________________| s |________________________| t |______________________| on |_____________________| all |___________________| this |___________________| for |___________________| had |__________________| but |_________________| be |_________________| not |________________| they |________________| so The winner: Shortest solution (by character count, per language). Have fun! Edit: Table summarizing the results so far (2012-02-15) (originally added by user Nas Banov): Language Relaxed Strict ========= ======= ====== GolfScript 130 143 Perl 185 Windows PowerShell 148 199 Mathematica 199 Ruby 185 205 Unix Toolchain 194 228 Python 183 243 Clojure 282 Scala 311 Haskell 333 Awk 336 R 298 Javascript 304 354 Groovy 321 Matlab 404 C# 422 Smalltalk 386 PHP 450 F# 452 TSQL 483 507 The numbers represent the length of the shortest solution in a specific language. "Strict" refers to a solution that implements the spec completely (draws |____| bars, closes the first bar on top with a ____ line, accounts for the possibility of long words with high frequency etc). "Relaxed" means some liberties were taken to shorten to solution. Only solutions shorter then 500 characters are included. The list of languages is sorted by the length of the 'strict' solution. 'Unix Toolchain' is used to signify various solutions that use traditional *nix shell plus a mix of tools (like grep, tr, sort, uniq, head, perl, awk).

  Read the article

• Failure in Yahoo Authentication in Android

  - by Jayson Tamayo

  I'm trying to integrate Yahoo into my application. I want them to login using their Yahoo accounts because I will be needing their names later in the application. But whenever I request for a token, I receive the following errors: getRequestToken() Exception: oauth.signpost.exception.OAuthCommunicationException: Communication with the service provider failed: Service provider responded in error: 400 (Bad Request) Here is my code (Request_Token_Activity.java): import oauth.signpost.OAuth; import oauth.signpost.OAuthConsumer; import oauth.signpost.OAuthProvider; import oauth.signpost.commonshttp.CommonsHttpOAuthConsumer; import oauth.signpost.commonshttp.CommonsHttpOAuthProvider; import oauth.signpost.signature.HmacSha1MessageSigner; import android.app.Activity; import android.content.Intent; import android.content.SharedPreferences; import android.content.SharedPreferences.Editor; import android.net.Uri; import android.os.Bundle; import android.preference.PreferenceManager; import android.util.Log; public class Request_Token_Activity extends Activity { private OAuthConsumer consumer; private OAuthProvider provider; private SharedPreferences prefs; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); try { consumer = new CommonsHttpOAuthConsumer("my consumer key", "my consumer secret"); consumer.setMessageSigner(new HmacSha1MessageSigner()); provider = new CommonsHttpOAuthProvider( "http://api.login.yahoo.com/oauth/v2/get_request_token", "http://api.login.yahoo.com/oauth/v2/get_token", "http://api.login.yahoo.com/oauth/v2/request_auth"); } catch (Exception e) { Log.e("", "onCreate Exception: " + e.toString()); } getRequestToken(); } private void getRequestToken() { try { String url = provider.retrieveRequestToken(consumer, "yahooapi://callback"); Log.i("", "Yahoo URL: " + url); Intent intent = new Intent(Intent.ACTION_VIEW, Uri.parse(url)).setFlags(Intent.FLAG_ACTIVITY_SINGLE_TOP | Intent.FLAG_ACTIVITY_NO_HISTORY | Intent.FLAG_FROM_BACKGROUND); this.startActivity(intent); } catch (Exception e) { Log.i("", "getRequestToken() Exception: " + e.toString()); } } @Override public void onNewIntent(Intent intent) { super.onNewIntent(intent); prefs = PreferenceManager.getDefaultSharedPreferences(this); final Uri uri = intent.getData(); if (uri != null && uri.getScheme().equals("yahooapi")) { getAccessToken(uri); } } private void getAccessToken(Uri uri) { final String oauth_verifier = uri.getQueryParameter(OAuth.OAUTH_VERIFIER); try { provider.retrieveAccessToken(consumer, oauth_verifier); final Editor edit = prefs.edit(); edit.putString("YAHOO_OAUTH_TOKEN", consumer.getToken()); edit.putString("YAHOO_OAUTH_TOKEN_SECRET", consumer.getTokenSecret()); edit.commit(); String token = prefs.getString("YAHOO_OAUTH_TOKEN", ""); String secret = prefs.getString("YAHOO_OAUTH_TOKEN_SECRET", ""); consumer.setTokenWithSecret(token, secret); Log.i("", "Yahoo OAuth Token: " + token); Log.i("", "Yahoo OAuth Token Secret: " + token); } catch (Exception e) { Log.i("", "getAccessToken Exception: " + e.toString()); } } } And this is a snapshot of my AndroidManifest.xml: <activity android:name="Request_Token_Activity" android:launchMode="singleTask"> <intent-filter> <action android:name="android.intent.action.VIEW" /> <category android:name="android.intent.category.DEFAULT" /> <category android:name="android.intent.category.BROWSABLE" /> <data android:scheme="yahooapi" android:host="callback" /> </intent-filter> </activity> I have set-up my Yahoo Project as a Web Application and put Read and Write access to Social and Contacts. What am I doing wrong?

  Read the article

• MySQL: Creating table with FK error (errno 150)

  - by Peter Bailey

  I've tried searching on this error and nothing I've found helps me, so I apologize in advance if this is a duplicate and I'm just too dumb to find it. I've created a model with MySQL Workbench and am now attempting to install it to a mysql server. Using File Export Forward Engineer SQL CREATE Script... it outputs a nice big file for me, with all the settings I ask for. I switch over to MySQL GUI Tools (the Query Browser specifically) and load up this script (note that I'm going form one official MySQL tool to another). However, when I try to actually execute this file, I get the same error over and over SQLSTATE[HY000]: General error: 1005 Can't create table './srs_dev/location.frm' (errno: 150) "OK", I say to myself, something is wrong with the location table. So I check out the definition in the output file. SET @OLD_UNIQUE_CHECKS=@@UNIQUE_CHECKS, UNIQUE_CHECKS=0; SET @OLD_FOREIGN_KEY_CHECKS=@@FOREIGN_KEY_CHECKS, FOREIGN_KEY_CHECKS=0; SET @OLD_SQL_MODE=@@SQL_MODE, SQL_MODE='TRADITIONAL'; -- ----------------------------------------------------- -- Table `state` -- ----------------------------------------------------- DROP TABLE IF EXISTS `state` ; CREATE TABLE IF NOT EXISTS `state` ( `state_id` INT NOT NULL AUTO_INCREMENT , `iso_3166_2_code` VARCHAR(2) NOT NULL , `name` VARCHAR(60) NOT NULL , PRIMARY KEY (`state_id`) ) ENGINE = InnoDB; -- ----------------------------------------------------- -- Table `brand` -- ----------------------------------------------------- DROP TABLE IF EXISTS `brand` ; CREATE TABLE IF NOT EXISTS `brand` ( `brand_id` INT UNSIGNED NOT NULL AUTO_INCREMENT , `name` VARCHAR(45) NOT NULL , `domain` VARCHAR(45) NOT NULL , `manager_name` VARCHAR(100) NULL , `manager_email` VARCHAR(255) NULL , PRIMARY KEY (`brand_id`) ) ENGINE = InnoDB; -- ----------------------------------------------------- -- Table `location` -- ----------------------------------------------------- DROP TABLE IF EXISTS `location` ; CREATE TABLE IF NOT EXISTS `location` ( `location_id` INT UNSIGNED NOT NULL AUTO_INCREMENT , `name` VARCHAR(255) NOT NULL , `address_line_1` VARCHAR(255) NULL , `address_line_2` VARCHAR(255) NULL , `city` VARCHAR(100) NULL , `state_id` TINYINT UNSIGNED NULL DEFAULT NULL , `postal_code` VARCHAR(10) NULL , `phone_number` VARCHAR(20) NULL , `fax_number` VARCHAR(20) NULL , `lat` DECIMAL(9,6) NOT NULL , `lng` DECIMAL(9,6) NOT NULL , `contact_url` VARCHAR(255) NULL , `brand_id` TINYINT UNSIGNED NOT NULL , `summer_hours` VARCHAR(255) NULL , `winter_hours` VARCHAR(255) NULL , `after_hours_emergency` VARCHAR(255) NULL , `image_file_name` VARCHAR(100) NULL , `manager_name` VARCHAR(100) NULL , `manager_email` VARCHAR(255) NULL , `created_date` TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP , PRIMARY KEY (`location_id`) , CONSTRAINT `fk_location_state` FOREIGN KEY (`state_id` ) REFERENCES `state` (`state_id` ) ON DELETE NO ACTION ON UPDATE NO ACTION, CONSTRAINT `fk_location_brand` FOREIGN KEY (`brand_id` ) REFERENCES `brand` (`brand_id` ) ON DELETE NO ACTION ON UPDATE NO ACTION) ENGINE = InnoDB; CREATE INDEX `fk_location_state` ON `location` (`state_id` ASC) ; CREATE INDEX `fk_location_brand` ON `location` (`brand_id` ASC) ; CREATE INDEX `idx_lat` ON `location` (`lat` ASC) ; CREATE INDEX `idx_lng` ON `location` (`lng` ASC) ; Looks ok to me. I surmise that maybe something is wrong with the Query Browser, so I put this file on the server and try to load it this way ] mysql -u admin -p -D dbname < path/to/create_file.sql And I get the same error. So I start to Google this issue and find all kinds of accounts that talk about an error with InnoDB style tables that fail with foreign keys, and the fix is to add "SET FOREIGN_KEY_CHECKS=0;" to the SQL script. Well, as you can see, that's already part of the file that MySQL Workbench spat out. So, my question is then, why is this not working when I'm doing what I think I'm supposed to be doing? Version Info: # MySQL: 5.0.45 GUI Tools: 1.2.17 Workbench: 5.0.30

  Read the article

• How to debug SITE.MASTER ASPX file?

  - by salvationishere

  I am developing a C#/SQL VS 2008 website application and I'm trying to set breakpoints in my site.master file--is there a way to do this? The contents of this file are: <%@ Master Language="C#" AutoEventWireup="true" CodeFile="Site.master.cs" Inherits="Site" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head id="Head1" runat="server"> <title>Forms Authentication, Authorization, and User Accounts</title> <link href="Styles.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="wrapper"> <form id="form1" runat="server"> <div id="header"> <span class="title">User Account Tutorials</span><br /> <span class="breadcrumb"> <asp:SiteMapPath ID="SiteMapPath1" runat="server"> </asp:SiteMapPath> </span> </div> <div id="content"> <asp:ContentPlaceHolder ID="MainContent" runat="server"> <!-- Page-specific content will go here... --> </asp:ContentPlaceHolder> </div> <div id="navigation"> <asp:ContentPlaceHolder ID="LoginContent" runat="server"> <asp:LoginView ID="LoginView1" runat="server"> <LoggedInTemplate> Welcome back,<asp:LoginName ID="LoginName1" runat="server" /> </LoggedInTemplate> <AnonymousTemplate> Hello, stranger! </AnonymousTemplate> </asp:LoginView> <br /> <br /> </asp:ContentPlaceHolder> <asp:LoginStatus ID="LoginStatus1" runat="server" LogoutAction="Redirect" LogoutPageUrl="~/Logout.aspx" /> <ul> <li> <asp:HyperLink runat="server" ID="lnkHome" NavigateUrl="~/Default.aspx">Home</asp:HyperLink> </li> <asp:Repeater runat="server" ID="menu" DataSourceID="SiteMapDataSource1"> <ItemTemplate> <li> <asp:HyperLink ID="lnkMenuItem" runat="server" NavigateUrl='<%# Eval("Url") %>'><%# Eval("Title") %></asp:HyperLink> <asp:Repeater ID="submenu" runat="server" DataSource="<%# ((SiteMapNode) Container.DataItem).ChildNodes %>"> <HeaderTemplate> <ul> </HeaderTemplate> <ItemTemplate> <li> <asp:HyperLink ID="lnkMenuItem" runat="server" NavigateUrl='<%# Eval("Url") %>'><%# Eval("Title") %></asp:HyperLink> </li> </ItemTemplate> <FooterTemplate> </ul> </FooterTemplate> </asp:Repeater> </li> </ItemTemplate> </asp:Repeater> </ul> <asp:SiteMapDataSource ID="SiteMapDataSource1" runat="server" ShowStartingNode="false" /> </div> </form> </div> </body> </html>

  Read the article

• How can I provide maximum integration between a calendar-like webapp and desktop calendar applicatio

  - by Joshua Carmody

  I've been assigned to upgrade/rewrite a webapp that my company uses to schedule conference calls. One of the goals of the upgrade is to improve integration between the application and our user's Outlook calendars (and ideally other calendar programs as well). At present, when a user is viewing the details of a scheduled conference call on the webapp, they can click an "Add to Outlook calendar" link, which points them to a dynamically generated .ical file. On most of our users' systems, Outlook opens the file by default, bringing up the "create calendar appointment" window with the concall information pre-populated. This link creates a 1-time appointment only, and has to be clicked on for each occurrence of the call. So if a call happened every Monday in June, you would have to click 4 links to add all the appointments to your calendar. This is the full extent of our current level of integration. Ideally, we will be able to upgrade the system so that users can "subscribe" to a con call, which would mean not just the current call, but all calls in a reoccurring series would appear in the user's calendar with a single click. If one call in a series was cancelled, or rescheduled, that call's appointment would change in the users' calendar, without the user having to do anything, and without upsetting the rest of the series' appointments. Also, any changes to the call's info (say, the phone number was changed) would automatically be updated in the Outlook calendars of anyone who subscribed, without them having to come back to the webapp to double-check that their information is up to date. Ideally this would also work with other popular calendar programs, as well as Google Calendar. I don't know if we'll be able to achieve that level of integration, but I'd like to get as close to that as we can. Additional details and challenges: We aren't running Exchange on a public server, and I'm not likely to be able to get that changed Assume that our users are basically "the general internet public". Our users are not members of our office's network, nor can they be. We can't set up network logins or Exchange accounts for them. Some of our users are not using Outlook, but some other calendar program. Of the ones that are using Outlook, not all are using the same version. We have users in more than 50 countries that are using this webapp. Synchronization would be one-directional. Nobody can make changes in their own calendars and expect the server to reflect them/replicate them to other users Current conference calling application is written in ColdFusion. Rewrite will probably be in ASP.NET, but I haven't confirmed that yet. Solutions that work with either or both technologies are appreciated. I know that .ical files can theoretically contain more than one event, but in my own experiments I haven't had success in getting Outlook (2003) to add more than one event at a time using the .ical file method. Maybe someone knows how to set up a multi-event .ical file that Outlook will accept? Could a link to such an .ical file be "subscribed" to? Is there such thing as a calendar RSS feed? Could I simulate running an exchange server? Any other ideas? Thanks everyone!

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119  | Next Page >