Search Results

Search found 15595 results on 624 pages for 'ip forward'.

Page 117/624 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Lots of strange IP addresses in my Windows Firewall logs. Concern?

  - by gmoore

  Was trying to debug a Samba sharing issue with Mac OS X so I turned on logging for my Windows Firewall. I didn't expect a lot of conections but the thing filled up quickly. Here's a sample: 2009-12-21 08:49:32 OPEN-INBOUND TCP 192.168.0.4 192.168.0.3 56335 139 - - - - - - - - - 2009-12-21 08:49:33 OPEN-INBOUND TCP 192.168.0.4 192.168.0.3 56337 139 - - - - - - - - - 2009-12-21 08:50:02 OPEN UDP 192.168.0.3 68.87.73.242 1389 53 - - - - - - - - - 2009-12-21 08:50:02 CLOSE TCP 192.168.0.3 212.96.161.238 1391 80 - - - - - - - - - 2009-12-21 08:50:02 OPEN UDP 192.168.0.3 68.87.71.226 60290 53 - - - - - - - - - 2009-12-21 08:50:02 OPEN TCP 192.168.0.3 212.96.161.238 1391 80 - - - - - - - - - 2009-12-21 08:50:02 OPEN TCP 192.168.0.3 212.96.161.238 1393 80 - - - - - - - - - 2009-12-21 08:50:04 CLOSE TCP 192.168.0.3 212.96.161.238 1393 80 - - - - - - - - - 2009-12-21 08:50:41 CLOSE UDP 192.168.0.3 192.168.0.4 137 50300 - - - - - - - - - I can pick out the local IP addresses (192.168.0.3 is my Windows XP machine, 192.169.0.4 is Mac OS X) as I debug the Samba issue. But some of the others resolve to Comcast (my ISP) and others resolve to weird hosts like van-dns.com and navisite.net. It doesn't look like any connection sent/received any bytes. I used the reference here: http://technet.microsoft.com/en-us/library/cc758040%28WS.10%29.aspx. Is it a cause for concern?

  Read the article

• Pinging computer name in LAN results in public IP?

  - by Bob

  Hi, I recently introduced a new machine to my LAN. The computer name for this machine is 'server'. Historically I've been able to access machines from my home network (from a web browser or RDP) using the machine name and it resolves to a local IP address just fine. However, I can't seem to do this anymore. When I ping the computer name, I get the following: C:\Users\Robert>ping server Pinging server.router [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=24ms TTL=54 Reply from 67.215.65.132: bytes=32 time=23ms TTL=54 Reply from 67.215.65.132: bytes=32 time=24ms TTL=54 Reply from 67.215.65.132: bytes=32 time=24ms TTL=54 I notice also that it appends the 'router' suffix to my domain name for some reason. 'router' is the name of my router, obviously. I'm also using OpenDNS as my DNS provider (configured through my router so it gets passed down through DHCP). Why is this not working for me? Can someone explain how the DNS resolution should take place? For LAN resolution, it shouldn't go straight to OpenDNS. I thought that each Windows machine kept it's own sort of "mini DNS server" that knows about all machines on the local network and it first tries to resolve using that. Please let me know what I can do to get this working!

  Read the article

• Host couldn't be reached by domain name, only by IP: Apache's fault?

  - by MaxArt

  I have this Windows Server 2003 R2 32 bit machine running Apache 2.4.2 with OpenSSL 1.0.1c and PHP 5.4.5 via mod_fcgid 2.3.7. This config worked just fine for some hours, but then the site couldn't be reached with its domain name, say www.example.com, but it could be still reached by its IP address. In particular, while https://www.example.com/ yielded a connection error, http://123.1.2.3/ worked just fine. Yes, first https then http. Error and access logs were clean, i.e. they showed no signs of problems. Just the usual messages, that were interrupted while the site couldn't be reached. After some investigation, a simple restart of Apache solved the problem. Unfortunately, I didn't have the chance to test if https://123.1.2.3/ worked as well, or if http://www.example.com/ was still redirected to https as usual. So, has anyone have any idea of what happened? Before I get tired of Apache and ditch it in favor of Nginx? Edit: Some log informations. The last line of sslerror.log is from 90 minutes before the problem occurred, so I guess it's not important. ssl_request.log shows nothing interesting, too: these are the last two lines before the problem: [28/Aug/2012:17:47:54 +0200] x.x.x.x TLSv1.1 ECDHE-RSA-AES256-SHA "GET /login HTTP/1.1" 1183 [28/Aug/2012:17:47:45 +0200] y.y.y.y TLSv1 ECDHE-RSA-AES256-SHA "POST /upf HTTP/1.1" 73 The previous lines are all the same and don't seem interesting, except 4 lines like these 30-40 seconds before the problem: [28/Aug/2012:17:47:14 +0200] z.z.z.z TLSv1 ECDHE-RSA-AES256-SHA "-" - These are the corrisponding lines from sslaccess.log: z.z.z.z - - [28/Aug/2012:17:47:14 +0200] "-" 408 - ... x.x.x.x - - [28/Aug/2012:17:47:54 +0200] "GET /login HTTP/1.1" 200 1183 y.y.y.y - - [28/Aug/2012:17:47:45 +0200] "POST /upf HTTP/1.1" 200 73

  Read the article

• How to set static ip address on vmware for NAT guest vms from an ubuntu Host dhcp server?

  - by javadba

  I need to configure various linux flavor NAT'ed guest vm's to have static ip addresses provided by the Ubuntu host. The vmware documentation punts on this topic, deferring to "see the man pages for your linux distribution". But the generic pages for "my linux distro" do not know about the special stuff for vmware e.g. vmnet8. Pointers from someone who just knows how to do this would be much appreciated. Here is the /etc/vmware/vmnet8/dhcpd/dhcpd.conf: allow unknown-clients; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours subnet 192.168.238.0 netmask 255.255.255.0 { range 192.168.238.128 192.168.238.254; option broadcast-address 192.168.238.255; option domain-name-servers 192.168.238.2; option domain-name localdomain; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours option netbios-name-servers 192.168.238.2; option routers 192.168.238.2; } host vmnet8 { hardware ethernet 00:50:56:C0:00:08; fixed-address 192.168.238.1; option domain-name-servers 0.0.0.0; option domain-name ""; option routers 0.0.0.0; } Fromt the dhcpd.conf documentation, we are supposed to add an entry for static hosts similar to the following: host mystatichostonee { hardware ethernet 00:20:6B:C7:9B:E4; fixed-address 192.168.238.101; } host mystatichosttwo { hardware ethernet 00:23:7a:C7:9c:F2; fixed-address 192.168.238.102; } But notice that the vmnet8 entry in the vmware-generated dhcpd.conf already is set to fixed-address. I don't know how to add the specifics for my hosts to that vmnet8 entry: do they become nested?

  Read the article

• dynamic 404.jsp using struts

  - by Kapsh

  I would like to display an intelligent 404 page with some application data. Currently, there is a 'dumb' jsp, so I just forward to the view and I am done with it. But now I guess I really need to forward to an action so that I can set some more data to display on the error.jsp. How do I do it through configuration via struts-config? I need congifuration because I do not want to touch any individual files that might be forwarding to the existing view. I tried doing the fol, but I get an error and I dont see anything in the log. So currently, <forward name="ErrorView" path="/Error404.jsp" type="org.apache.struts.action.ActionForward"> </forward> What I want: <forward name="ErrorView" path="/errorAction.do" type="org.apache.struts.action.ActionForward"> </forward>

  Read the article

• Windows 7 / TCP/IP network share guide - looking for to resolve failure to mount lacie network drive but works on XP,Linux,Mac.

  - by Rob

  Can anyone advise me of a really good, readable, Windows 7 TCP/IP network share guide, book, or reference. I want this because I cannot mount my Lacie 2big ethernet network drive in Windows 7 (32 bit home), but I can mount it in Windows XP Home 32bit, Ubuntu Linux 10.04 and Apple MacOS X. This drive is being mounted via the accompanying Lacie Ethernet Agent in XP (which I believe uses "Bonjour" protocol), on Mac and Linux it works without further need for software. Another Super User user has the same problem, but no answer: Trouble accessing network drives in Windows 7 I hope my take on the question shows a better willingness to investigate and do some digging - and therefore invite some suggestions to help with this. The drive is detected by Windows 7 (i.e. speech bubble "network drive found") but on trying to open an Explorer window, this remains blank with the Windows busy pointer. I'd prefer not to reinstall Windows 7 to see if that cures the problem, I'd rather understand what is happening/not happening, perhaps even compare differences with Windows XP. Suggestions, please for such guides or even the original problem itself. Update Edit Rewrote question more comprehensively here: Mhttp://superuser.com/questions/304209/looking-for-definitive-answer-to-accessing-a-network-share-via-windows-7-home-and

  Read the article

• How to change the mail domain server so it's not displaying IP? Changing [email protected] to [email protected]

  - by Pavel

  Hi guys. I'm kinda a noob as a server admin so please bear with me. I've installed postfix mail server and everything is working fine but the 'from' box is displaying [email protected]. I want to set it up so it displays domainname.com instead of IP. I just hope you know what I mean. My main.cf in postfix folder looks like this: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mail.thevinylfactory alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = mail.thevinylfactory.com, thevinylfactory, localhost.localdomain, localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all Can anyone help me with this one? If you need any more details please let me know. Thanks in advance!

  Read the article

• How to get the computer name (hostname in a web aplication)?

  - by Filipe

  Hi, how can I get the client's computer name in a web application. The user in a network. Regards // Already tryed this option string IP = System.Web.HttpContext.Current.Request.UserHostAddress; string compName = DetermineCompName(IP); System.Net.IPHostEntry teste = System.Net.Dns.GetHostEntry(IP); ssresult = IP + " - " + teste.HostName; // TODO: Write implementation for action private static string DetermineCompName(string IP) { IPAddress myIP = IPAddress.Parse(IP); IPHostEntry GetIPHost = Dns.GetHostEntry(myIP); string[] compName = GetIPHost.HostName.ToString().Split('.'); return compName[0]; } All of that, gives me only the IP :/

  Read the article

• Centos VM serving multiple public IP: how to configure network interface?

  - by Glasnhost

  I have a Centos 5.6 VM (Vsphere client) already responding to two different public IPs on eth0 and eth0:1 and I'm trying to add eth0:2. I copied the eth0 config file and restarted the network service. I don't understand which other steps are needed... ifconfig eth0 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.10 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:163371837 errors:77 dropped:0 overruns:0 frame:0 TX packets:168210961 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1891221045 (1.7 GiB) TX bytes:855899500 (816.2 MiB) Interrupt:59 Base address:0x2000 eth0:1 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.11 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:59 Base address:0x2000 eth0:2 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.12 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:59 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:188976973 errors:0 dropped:0 overruns:0 frame:0 TX packets:188976973 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2015642664 (1.8 GiB) TX bytes:2015642664 (1.8 GiB) more /etc/resolv.conf nameserver 10.1.12.1 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.1.12.1 0.0.0.0 UG 0 0 0 eth0

  Read the article

• streaming to correct network interface

  - by robin hood

  I have IP cam that supports RTSP streaming. It's connected to router with 2 network cards with IP1 and IP2 addresses. I make 2 connections to IP cam by IP1 and IP2 addresses from the same IP and I need to receive corresponding streams thru correct network card, but both streams (RTP over UDP) go thru IP1. How this can be resolved? I don't know if RTSP server binds UDP sockets to corresponding IP and I don't know what IP stack is in IP cam (weak end system or strong end system). I haven't found anything interesting in router configuration. As I understand, routing table cannot help me cos I'm connected from the same IP, is it right? Also Sorry for incomplete info but it's all I have at the moment. Thanks for your time.

  Read the article

• Clone a 'link' in SWT

  - by Steve

  I have a table of information that includes a username, an ip address, and a timestamp. What I wanted to do was to have the ip address contained within a link object that when the link is clicked it utilizes bgp.he.net to get information about the host/IP address. I have tried creating threads to resolve the IP addresses but it is often a large amount of IP addresses and I read that InetAddress#getByName isn't non-blocking, so I figured having links that go to this site is the next best thing. Question is: Is it possible to have links for each of my IP addresses in the table without creating a new link object for each row? I don't know how bad that would be on memory usage which is why I'm inquiring about cloning an instance of an IP and having the link open bgp.he.net/link.getText()

  Read the article

• What's a way for a client to automatically resolve the ip address of a server?

  - by zooropa

  The project I am working on is a client/server architecture. In a LAN environment, I want the client's to be able to automatically determine the server's address. I want to avoid having to manually configure each client with the ip address of the server. What is the best way to do this? Some alternatives I have thought about doing are: The server could listen for broadcast packets from the clients. The message from the client would be a request for the IP address of the server. The server would respond with its address. The machine running my project's server could also have a bind server running. The LAN's router could be configured to use it as one of its DNS servers. I think I saw that there is a bind library. Does that mean I can build the bind service into my server so that bind doesn't have to be installed on the server? Any other ideas? What have you done in the past? What are the pros/cons of these approaches and others that might be suggested? Thanks for your help!

  Read the article

• How to ensure nginx serves a request from an external IP?

  - by Matt

  I have a strange situation, where my nginx setup stopped handling external requests. I'm pretty stuck. If I hit the domain without a subdomain, I properly get redirected, however, if I request the full url, that fails and doesn't log anything, anywhere. I am able to curl localhost on the server itself, however when I attempt to curl from an external machine, it fails with: curl: (7) couldn't connect to host I've also noticed that bots can get through, I've seen Google hit the log every now and then. My nginx.conf file: upstream mongrels { server 127.0.0.1:5000; } server { listen 80; server_name culini.com; rewrite ^/(.*) http://www.culini.com/$1 permanent; } # the server directive is nginx's virtual host directive. server { # port to listen on. Can also be set to an IP:PORT listen 80; # Set the max size for file uploads to 50Mb client_max_body_size 50M; # sets the domain[s] that this vhost server requests for server_name www.culini.com; # doc root root /var/www/culini/current/public; log_format app '$remote_addr - $remote_user [$time_local] ' '"$request" $status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for" [$upstream_addr $upstream_response_time $upstream_status]'; # vhost specific access log access_log /var/www/culini/current/log/nginx.access.log app; error_log /var/www/culini/current/log/nginx.error.log debug; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect false; proxy_max_temp_file_size 0; proxy_intercept_errors on; proxy_ignore_client_abort on; if (-f $request_filename) { break; } if (!-f $request_filename) { proxy_pass http://mongrels; break; } } } Please, please, any help would be greatly appreciated.

  Read the article

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• How to know the source of certain TCP traffic on AIX

  - by A.Rashad

  We have two AIX boxes, one for production system and another for testing. both systems are running ATM machine switches, where the ATM device is connected via TCP socket. we had an issue on production system where the machine would power off or get disconnected but the netstat -na | grep <IP of machine > would still mention that the socket is up when simulated that case on the UAT environment, the problem did not happen, where the socket would terminate in 3 to 5 minutes. when sniffed on the traffic between the machine and ATM we found that no traffic takes place on production while there is some sort of heartbeat on UAT. but it is not initiated by the application. $>tcpdump | grep -v "10.2.2.71" | grep -v "HSRP" | grep "10.3.1.30" tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on en6, link-type 1, capture size 96 bytes 09:08:13.323421 IP server073.afs3-callback > 10.3.1.30.impera: . 278204201:278204202(1) ack 3307884029 win 164 09:08:13.335334 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:08:23.425771 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:08:23.425789 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 09:09:13.628985 IP server073.afs3-callback > 10.3.1.30.impera: . 0:1(1) ack 1 win 164 09:09:13.633900 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:09:23.373634 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:09:23.373647 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 while on production, that traffic is not there. we want to know where this traffic is initiated from to implement on production to sense disconnection our comms parameters are: tcp_keepcnt = 2 tcp_keepidle = 100 tcp_keepinit = 150 tcp_keepintvl = 150 tcp_finwait2 = 1200 can anyone help? Editing Question: One point I missed because I was rushing to a meeting. the difference between the Production and UAT in setup is that in Production we have an application called F5 working as load balancer between the ATMs and the AIX box, while it is a direct connection through MPLS in case of UAT. note: we had one MPLS and one GPRS connected ATMs on UAT, and both connections terminated when unplugged in about 4 minutes Edit 2 the no -o tcp_timewait command returns 1 in both Production and UAT

  Read the article

• Linux: setting up an elite/high-anonimity Web proxy on a dedicated server

  - by YellowSquirrel

  I'm renting a dedicated server which I'd like to use to "surf the Web": basically I want to always surf the Web from the same static IP (the one of my dedicated server). I can do it by running Xvnc/FreeNX on the dedicated server, but this is kinda slow and clumsy (I tried it). What are the steps needed to install an "elite/high-anonimity" Web proxy on a dedicated (Debian) Linux server knowing that my two requirements are: I'm the only person that needs access to the proxy all I want is that my broadband (dynamic) IP is completely hidden (I want to always surf from my dedicated server's IP). Note that using the static IP people can find my domains and my real name and I'm perfectly fine with that (actually it is what I want). What I don't want is people knowing from which dynamic IP (broadband) I'm connecting. What are the steps needed to do that? (basically I don't care about "anonimity", what I want is to appear to surf from a static IP and I think I need what is called an "elite" Web proxy to do that, but I'm not sure) Technical infos and sample configuration most welcome :)

  Read the article

• Multiple vlan issue with procurve switch

  - by Chris-AZ

  I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

  Read the article

• Cannot Access Web Interface on HP 2510G

  - by Stephen

  I am currently setting up a new infrastructure with HP 2510s as edge switches and an HP E5406 as the main switch. I also have a DHCP and DNS server running on the same network. When i first set up one of my 2510 switches, I gave it a static IP through the console and then went to the web interface to continue my configuration. Later, I realized that I assigned it the wrong IP address, so i went through the web interface and changed the IP address to the correct one. Now, I can't access the web interface. I can telnet to the switch on the new IP address, but the web interface will not load. If I switch from static IP to DHCP, it loads the web interface. Any ideas on what could be causing the web server in the 2510 not to load with the new static IP address?

  Read the article

• Port forwarding problem

  - by Steve

  I have a modem connecting to ADSL2 network and a router connecting to the modem. The rest of the machines all connect to the router. The modem has IP as 192.168.1.1 and the router's IP is 192.168.0.1. From the modem configuration, I can see that the modem thinks the router's IP is 192.168.1.2. I can visit the router by either using 192.168.0.1 or 192.168.1.2. Now I forward a port from the router to a private machine. It works. I can test it by typing 192.168.1.2 and it is redirected to the private machine. But if I use 192.168.0.1, it is still the router's configuration page. I also do a port forwarding on my modem. Since the modem sees only the router, I can only forward the port to the router's specific port. And I am thinking that by doing this, I can reach the private machine after two times port forwarding, once on the modem and once on the router. I also have a static public IP. I want to achieve the goal that when someone types the public IP, he will be redirected to the private machine. But when I use some online port forwarding tester, the result always says that the port is closed on the public IP. I have the questions: Why my router has two IPs? Why using one IP I can see the port forwarding result while using the other I cannot? I think the port forwarding only works when visiting from outside, rather than from both outside and inside. Otherwise, if I set port forwarding on my router/modem on port 80, I will never be able to see its original configuration page again. Everything is forwarded. Am I right? How can I achieve my goal described above? By achieve this, I will have a dedicated server of my own and the users can visit from the public IP. Anyone can correct me on any mistakes I made? I am using Netconn modem and D-Link DIR-300 router. Thank you very much for any help. Edit: Consider I have correctly setup the whole thing. Now I want to test my website by using public IP to visit it, but the port forwarding doesn't work. Does it consider that I am inside the local network and not using the port forwarding? If so, how can I do it? I ask my friends (outside my local network) to have a try and they can see the website. What should I do so that from the inside, I can do the testing? Thank you very much.

  Read the article

• Automatic allocation(not Dynamic Allocation) on Windows DHCP server

  - by Kazoom

  DHCP supports three different mechanisms for IP address allocation: Manual allocation: the server's administrator creates a configuration for the server that includes the MAC address and IP address of each DHCP client that will be able to get an address: functionally equivalent to BOOTP though the protocol is incompatible. Automatic allocation: the server's administrator creates a configuration for the server that includes only IP addresses, which it gives out to clients. An IP address, once associated with a MAC address, is permanently associated with it until the server's administrator intervenes. Dynamic allocation: like automatic allocation except that the server will track leases and give IP addresses whose lease has expired to other DHCP clients How can i configure the automatic allocation on Windows 2000 or XP DHCP server? i can think of setting the lease to unlimited period, but i m not sure if the computer shutsdown gracefully it will make the ip address available to other machine.

  Read the article

• Relay thru external SMTP server on Exchange 2010

  - by MadBoy

  My client has dynamic IP on which he hosts Exchange 2010 with POP3 Connector running and gathering emails from his current hosting. Until he gets static IP he wants to send emails out. This will work most of the time but some servers won't accept such email sent by Exchange (from dynamic ip due to multiple reasons) so I would like to make a relay thru external SMTP server which hosts current mailboxes. Normally SMTP server could be set up to allow relay thru it but this would require static IP to be allowed on that server so it would know which IP is allowed to relay thru it. Or is there a way to setup relay in Exchange 2010 so it can use dynamic IP and kinda authenticates with user/password itself on the hosted server?

  Read the article

• SVN Checkout URL - fresh install

  - by Webnet

  I just setup SVN on a server that is running Ubuntu server as a fresh install. I've got it up and running but am having difficult determining how to connect to it. I'm trying to do an import using the local IP address: http://IP/RepositoryName but it's saying it can't resolve the IP. I'm wondering if there's something on the server I need to setup. I have not modified dav_svn.conf because there is another server here that is running SVN (I'm migrating it to a new server) and it's dav_svn.conf is not modified. The current working SVN has a subdomain associated with the IP location of the server but doesn't do anything special with the ports as far as I can tell. I'm getting this error via RapidSVN when I try to import... Error: Error while performing action: OPTIONS of 'http://IP/RepositoryName': could not connect to server (http://IP) Any help would be appreciated

  Read the article

• Routing for IPSec tunnel

  - by Emre A

  For Juniper NetScreen-NS25, I configured a site-to-site IPSec tunnnel. For the outside interface of remote site, I also needed to go through tunnel which has the same IP as IPSec gateway. Now, when I add static route to route that outside interface IP through tunnel while tunnel is up, there would be no problem at all but if the tunnel is down for some reason, it cannot be re-established as the routing for the IPSec gateway IP which is the same as outside interface IP is set to go through tunnel which it needed to re-etablish at that time. So, packets won't hit that IP. I tried adding another routing entry which has metric 2 through other gateway but it did'nt succeeded. So, what type of routing should I configure to reach that IP when tunnel is down. Thanks in advance.

  Read the article

• Routing for IPSec tunnel

  - by Emre A

  Hello. For Juniper NetScreen-NS25, I configured a site-to-site IPSec tunnnel. For the outside interface of remote site, I also needed to go through tunnel which has the same IP as IPSec gateway. Now, when I add static route to route that outside interface IP through tunnel while tunnel is up, there would be no problem at all but if the tunnel is down for some reason, it cannot be re-established as the routing for the IPSec gateway IP which is the same as outside interface IP is set to go through tunnel which it needed to re-etablish at that time. So, packets won't hit that IP. I tried adding another routing entry which has metric 2 through other gateway but it did'nt succeeded. So, what type of routing should I configure to reach that IP when tunnel is down. Thanks in advance.

  Read the article

• Connect to virtual host computer from within virtualbox

  - by Nicky De Maeyer

  I'm currently developing on an ubuntu karmic. For this I've installed lampp with a virtual host on apache so http://myproject/ is mapped to my project's root directory. Now to test the website in IE I've installed an XP machine on a virtualBox OSE. Ive managed to get the virtual host working on the XP by adding its to the hostfile, like this: 255.255.255.255 myproject where 255.255.255.255 is the ip adress of the host computer (my ubuntu). Now every day when I come to work and plug in my computer to the network, my IP has changed. so When i boot the XP I have to change the IP in the hostfile to my new IP. Is there any way where I can set the ip to somthing the XP will recognise as the host machine? I've tried replacing the IP in the hostfile by the host computer name, but that does not seem to work... This would make my like a bit easier :)

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >