Search Results

Search found 11618 results on 465 pages for 'rescue mode'.

Page 117/465 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Reading bmp file for encrypting and decrypting txt file into it

  - by Shantanu Gupta

  I am trying to read a bmp file in C++(Turbo). But i m not able to print binary stream. I want to encode txt file into it and decrypt it. How can i do this. I read that bmp file header is of 54 byte. But how and where should i append txt file in bmp file. ? I know only Turbo C++, so it would be helpfull for me if u provide solution or suggestion related to topic for the same. int main() { ifstream fr; //reads ofstream fw; // wrrites to file char c; int random; clrscr(); char file[2][100]={"s.bmp","s.txt"}; fr.open(file[0],ios::binary);//file name, mode of open, here input mode i.e. read only if(!fr) cout<<"File can not be opened."; fw.open(file[1],ios::app);//file will be appended if(!fw) cout<<"File can not be opened"; while(!fr) cout<<fr.get(); // error should be here. but not able to find out what error is it fr.close(); fw.close(); getch(); } This code is running fine when i pass txt file in binary mode

  Read the article

• Pymedia video encoding failed

  - by user1474837

  I am using Python 2.5 with Windows XP. I am trying to make a list of pygame images into a video file using this function. I found the function on the internet and edited it. It worked at first, than it stopped working. This is what it printed out: Making video... Formating 114 Frames... starting loop making encoder Frame 1 process 1 Frame 1 process 2 Frame 1 process 2.5 This is the error: Traceback (most recent call last): File "ScreenCapture.py", line 202, in <module> makeVideoUpdated(record_files, video_file) File "ScreenCapture.py", line 151, in makeVideoUpdated d = enc.encode(da) pymedia.video.vcodec.VCodecError: Failed to encode frame( error code is 0 ) This is my code: def makeVideoUpdated(files, outFile, outCodec='mpeg1video', info1=0.1): fw = open(outFile, 'wb') if (fw == None) : print "Cannot open file " + outFile return if outCodec == 'mpeg1video' : bitrate= 2700000 else: bitrate= 9800000 start = time.time() enc = None frame = 1 print "Formating "+str(len(files))+" Frames..." print "starting loop" for img in files: if enc == None: print "making encoder" params= {'type': 0, 'gop_size': 12, 'frame_rate_base': 125, 'max_b_frames': 90, 'height': img.get_height(), 'width': img.get_width(), 'frame_rate': 90, 'deinterlace': 0, 'bitrate': bitrate, 'id': vcodec.getCodecID(outCodec) } enc = vcodec.Encoder(params) # Create VFrame print "Frame "+str(frame)+" process 1" bmpFrame= vcodec.VFrame(vcodec.formats.PIX_FMT_RGB24, img.get_size(), # Covert image to 24bit RGB (pygame.image.tostring(img, "RGB"), None, None) ) print "Frame "+str(frame)+" process 2" # Convert to YUV, then codec da = bmpFrame.convert(vcodec.formats.PIX_FMT_YUV420P) print "Frame "+str(frame)+" process 2.5" d = enc.encode(da) #THIS IS WHERE IT STOPS print "Frame "+str(frame)+" process 3" fw.write(d.data) print "Frame "+str(frame)+" process 4" frame += 1 print "savng file" fw.close() Could somebody tell me why I have this error and possibly how to fix it? The files argument is a list of pygame images, outFile is a path, outCodec is default, and info1 is not used anymore. UPDATE 1 This is the code I used to make that list of pygame images. from PIL import ImageGrab import time, pygame pygame.init() f = [] #This is the list that contains the images fps = 1 for n in range(1, 100): info = ImageGrab.grab() size = info.size mode = info.mode data = info.tostring() info = pygame.image.fromstring(data, size, mode) f.append(info) time.sleep(fps)

  Read the article

• Is it possible to navigate to the parent node of a matched node during XSLT processing?

  - by Darin

  I'm working with an OpenXML document, processing the main document part with some XSLT. I've selected a set of nodes via <xsl:template match="w:sdt"> </xsl:template> In most cases, I simply need to replace that matched node with something else, and that works fine. BUT, in some cases, I need to replace not the w:sdt node that matched, but the closest w:p ancestor node (ie the first paragraph node that contains the sdt node). The trick is that the condition used to decide one or the other is based on data derived from the attributes of the sdt node, so I can't use a typical xslt xpath filter. I'm trying to do something like this <xsl:template match="w:sdt"> <xsl:choose> <xsl:when test={first condition}> {apply whatever templating is necessary} </xsl:when> <xsl:when test={exception condition}> <!-- select the parent of the ancestor w:p nodes and apply the appropriate templates --> <xsl:apply-templates select="(ancestor::w:p)/.." mode="backout" /> </xsl:when> </xsl:choose> </xsl:template> <!-- by using "mode", only this template will be applied to those matching nodes from the apply-templates above --> <xsl:template match="node()" mode="backout"> {CUSTOM FORMAT the node appropriately} </xsl:template> This whole concept works, BUT no matter what I've tried, It always applies the formatting from the CUSTOM FORMAT template to the w:p node, NOT it's parent node. It's almost as if you can't reference a parent from a matching node. And maybe you can't, but I haven't found any docs that say you can't Any ideas?

  Read the article

• iPad3 HD Black Screen in Portrait Orientation

  - by Jason Brooks

  I'm currently updating my game using XCode 4.3.1 and an iPad3. WHen iPAD HD mode is selected, I get a black screen when I change the scene from the AppDelegate. I'm using COCOS2d v1.0.1 My Game is portrait only mode, and I think I've tracked the problem down. If you create a new project with the default HelloWorld Layer, it works on the iPad3 and it's simulator in HD. However if you change the following code :- -(BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { ... #elif GAME_AUTOROTATION == kGameAutorotationUIViewController // // EAGLView will be rotated by the UIViewController // // Sample: Autorotate only in landscpe mode // // return YES for the supported orientations //return ( UIInterfaceOrientationIsLandscape( interfaceOrientation ) ); return ( UIInterfaceOrientationIsPortrait ( interfaceOrientation ) ); //return NO; ... } In RootViewController.m You see a black screen for the iPad3 real device and simulator. It works as expected on all devices, iPhone/iPod Touch, and iPad 1 and 2. If I change the statement back to return ( UIInterfaceOrientationIsLandscape( interfaceOrientation ) ); I get the Hello World rendered to the screen, but it is in landscape only on iPad3. Has anyone else encountered this and have any suggestions for a fix? The project is quite large to upgrade to the latest V1 Beta code.

  Read the article

• Manually changing keyboard orientation for a view that's on top of a camera view

  - by XKR

  I'm basically trying to reproduce the core functionality of the "At Once" app. I have a camera view and another view with a text view on it. I add both views to the window. All is well so far. [window addSubview:imagePicker.view]; [window addSubview:textViewController.view]; I understand that the UIImagePickerController does not support autorotation, so I handle it manually by watching UIDeviceOrientationDidChangeNotifications and applying the necessary transforms to the textViewController.view. Now, the problem here is the keyboard. If I do nothing, it just stays in portrait mode. I can get it to rotate by adding the following code to the notification handler. [[UIApplication sharedApplication] setStatusBarOrientation:interfaceOrientation]; [textView resignFirstResponder]; [textView becomeFirstResponder]; However, the following simple test produces weird behavior. Start the app in portrait mode. Rotate the device 90 degrees clockwise. Rotate the device 90 degrees counterclockwise (back to the initial position). Rotate the device 90 degrees clockwise. After step 4, instead of the landscape-mode keyboard, the portrait-style keyboard is shown, skewed to fit in the landscape keyboard frame. Perhaps my approach is wrong from the start. I was wondering if anyone has been able to reliably make the keyboard change its orientation in response to setStatusBarOrientation.

  Read the article

• Strange behaviour of CheckBox and TwoWay bound property

  - by walkor

  Hello, everyone. I fell in the following situation: I have a main UserControl with a DataGrid (which contains List). I need to show different panels depending on properties of the selected row(object). So i've created 2 controls and included them into this main control. Main control has 2 public properties - public List<ComplexObject> SourceList { get; set; } and public ComplexObject CurrentObject { get; set; } Pseudo-code: <UserControl x:Name="Main"> <DataGrid ItemsSource="{Binding SourceList}" SelectedItem="{Binding CurrentObject, Mode=TwoWay}"/> <Controls:RightPanelFirst Visibility="condition2"/> <Controls:RightPanelSecond Visibility="condition2"/> </UserControl> RightPanelFirst and RightPanelSecond have the following xaml: <UserControl> <... content here...> <CheckBox IsChecked="{Binding CurrentObject.ComplexProperty.SimpleProperty1, Mode=TwoWay}"> <CheckBox IsChecked="{Binding CurrentObject.ComplexProperty.SimpleProperty2, Mode=TwoWay}" x:Name="cbSecond"> <TextBox IsEnabled="{Binding IsChecked, ElementName=cbSecond}"/> </UserControl> So, my actual steps: Check both checkboxes (object values are set to true) Make other actions in code behind which modify CurrentObject. Then i want UI to reflect the changes, so I call NotifyPropertyChanged("CurrentObject"); SimpleProperty1 remains the same, but SimpleProperty2 resets to false I have no idea why this happens, can anyone help me please? Silverlight drives me mad.

  Read the article

• Force orientation change in testcase with fragments

  - by user1202032

  I have an Android test project in which I wish to programatically change the orientation. My test: public class MainActivityLandscapeTest extends ActivityInstrumentationTestCase2<MainActivity> { public MainActivityLandscapeTest() { super(MainActivity.class); } private MainActivity mActivity; private Fragment mDetailFragment; private Fragment mListFragment; private Solo mSolo; @Override protected void setUp() throws Exception { super.setUp(); mSolo = new Solo(getInstrumentation(), getActivity()); mSolo.setActivityOrientation(Solo.LANDSCAPE); mActivity = getActivity(); mListFragment = (Fragment) mActivity.getSupportFragmentManager() .findFragmentById(R.id.listFragment); mDetailFragment = (Fragment) mActivity.getSupportFragmentManager() .findFragmentById(R.id.detailFragment); } public void testPreConditions() { assertTrue(mActivity != null); assertTrue(mSolo != null); assertTrue(mListFragment != null); assertTrue(getActivity().getResources().getConfiguration().orientation == Configuration.ORIENTATION_LANDSCAPE); } /** * Only show detailFragment in landscape mode */ public void testOrientation() { assertTrue(mListFragment.isVisible()); assertTrue(mDetailFragment.isVisible()); } } The layouts for the activity is in seperate folders, layout-port and layout-land layout-port fragment_main.xml layout-land fragment_main.xml In landscape mode, the layout contains 2 fragments (Detail and list) while in portrait it contains 1(List only). If the device/emulator is already in landscape mode before testing begins, this test passes. If in portrait, it fails with a NullPointerException on mListFragment and mDetailFragment. Adding a delay (waitForIdleSync() and/or waitForActivity()) did NOT seem to solve my problem. How do i force the orientation to landscape in my test, while still being able to find the fragments using findFragmentById()?

  Read the article

• iBatis not populating object when there are no rows found.

  - by Omnipresent

  I am running a stored procedure that returns 2 cursors and none of them have any data. I have the following mapping xml: <resultMap id="resultMap1" class="HashMap"> <result property="firstName" columnIndex="2"/> </resultMap> <resultMap id="resultMap2" class="com.somePackage.MyBean"> <result property="unitStreetName" column="street_name"/> </resultMap> <parameterMap id="parmmap" class="map"> <parameter property="id" jdbcType="String" javaType="java.lang.String" mode="IN"/> <parameter property="Result0" jdbcType="ORACLECURSOR" javaType="java.sql.ResultSet" mode="OUT" resultMap="resultMap1"/> <parameter property="Result1" jdbcType="ORACLECURSOR" javaType="java.sql.ResultSet" mode="OUT" resultMap="resultMap2"/> </parameterMap> <procedure id="proc" parameterMap="parmmap"> { call my_sp (?,?,?) } </procedure> First result set is being put in a HashMap...second resultSet is being put in a MyBean class. code in my DAO follows: HashMap map = new HashMap() map.put("id", "1234"); getSqlMapClientTemplate().queryForList("mymap.proc", map); HashMap result1 = (HashMap)((List)parmMap.get("Result0")).get(0); MyBean myObject = (MyBean)((List)parmMap.get("Result1")).get(0);//code fails here in the last line above..my code fails. It fails because second cursor has no rows and thats why nothing is put into the list. However, first cursor returns nothing as well but since results are being put into a HashMap the list for first cursor atleast has HashMap object inside it.. Why this difference? is there a way to make iBatis put an object of MyBean inside the list even if there are no rows returned? Or should I be handling this in my DAO...I want to avoid handling it in the DAO because I have whole bunch of DAO's like these.

  Read the article

• Mysterious HttpSession and session-config dependency

  - by OneMoreVladimir

  Good day. I'm developing a Java web app with Servlets\JSP using Tomcat 7.0. During request from client I put and object into the session and use forward. After the forward processing the same request the object can be retreived if the secure parameter is false otherwise it is not stored in session. <session-config> <session-timeout>15</session-timeout> <cookie-config> <http-only>true</http-only> <secure>true</secure> </cookie-config> <tracking-mode>COOKIE</tracking-mode> </session-config> I've figured out that "...cookies can be created with the 'secure' flag, which ensures that the browser will never transmit the specified cookie over non-SSL...". I've configured Tomcat to use SSL, but that haven't helped. Changing the tracking mode to SSL haven't helped as well. How do session-config and HttpSession object correlate in this case? What could be the problem?

  Read the article

• IE8, XHTML, position: fixed; and z-index.

  - by Joel

  I have an XHTML 1.0 transitional Doctype. I have a <div> that is position: fixed; bottom: 0px; left: 0px; width: 100%; z-index: 200;. Inside that <div> I have two buttons which are position relative, aligned right, with a set z-index of 201; In Firefox the bar at the bottom and the two buttons are correctly located at the bottom. In IE8 however, the bar is visible and the z-index appears to be overlaying the other content, but the buttons are hidden behind the main div, despite being children and having their z-index set. I'm using the following meta tag; <meta http-equiv="X-UA-Compatible" content="IE=edge" /> to force the document into IE8 mode. If I emulate IE7 (put on compatability mode), the bar and buttons work just fine. I don't understand how IE7's rendering is better than IE8. I don't want to have to force compatability mode due to other things that IE7 cannot render and IE8 can. Is there another solution, or have I missed something? Thanks.

  Read the article

• Force screen size when testing embedded DOS app in Windows 7 command window

  - by tomlogic

  I'm doing some embedded DOS development with OpenWatcom (great Windows-hosted compiler for targeting 16-bit DOS applications). The target hardware has a 24x16 character screen (that supposedly emulates CGA to some degree), and I'm trying to get the CMD.EXE window on my Windows 7 machine to stay at a fixed 24x16 without any scroll bars. I've used both the window properties and MODE CON: COLS=24 LINES=16 to get the screen size that I wanted, but as soon as my application uses an INT10 BIOS calls to clear the screen, the mode jumps back to 80x24. Here's what I'm using to clear the screen: void cls(void) { // Clear screen and reset cursor position to (0,0) union REGS regs; regs.w.cx = 0; // Upper left regs.w.dx = 0x1018; // Lower right (of 16x24) regs.h.bh = 7; // Blank lines attribute (white text on black) regs.w.ax = 0x0600; // 06 = scroll up, AL=00 to clear int86( 0x10, &regs, &regs ); } Any ideas? I can still do my testing at 80x24 (or 80x25), but it doesn't entirely behave like the 24x16 mode.

  Read the article

• Linking Error Building 64bit Qt app on 32bit XP machine.

  - by photo_tom

  I'm trying to build a 64 bit version of my application (and yes I really do need the memory) on my 32bit xp dev box for production testing on our Vista64 server. Previously, I have built w/o any errors the Qt 4.6.2 DLL's in 64 bit mode. That step went vary smooth. Just to get started in building production, I'm trying to rebuild Qt's Star Delegate demo in 64bit mode. I converted the 32bit to 64bit app by changing the application configuration and adjusting the library's to the 64bit venisons. Now, when I go to link, I'm getting the following error when I link 1>------ Build started: Project: stardelegate, Configuration: Release x64 ------ 1>Linking... 1>MSVCRT.lib(crtexew.obj) : error LNK2001: unresolved external symbol WinMain 1>release64\stardelegate.exe : fatal error LNK1120: 1 unresolved externals Suggestions? edit - After some more searching, discovered if I link as a console app it will work and run. But not as a windows app. And I don't have this problem in 32 bit mode.

  Read the article

• c# combobox autocomplete like method

  - by Willem T

  Ihave been looking for an LIKE autocompletion mode. can anyone help me with this. When i enter a text in the combobox, the database should be asked for the data. all that goes well. But then i want my combobox to behave like the Suggest mode, but it doesn't work. I Tried this: cursorPosition = txtNaam.SelectionStart; string query = "SELECT bedr_naam FROM tblbedrijf WHERE bedr_naam LIKE '%" + txtNaam.Text + "%'"; DataTable table = Global.db.Select(query); txtNaam.Items.Clear(); for (int i = 0; i < table.Rows.Count; i++) { txtNaam.Items.Add(table.Rows[i][0].ToString()); } Cursor.Current = Cursors.Default; txtNaam.Select(cursorPosition, 0); But the behavior that this function creates is off it doesnt work like the suggest mode its a bit buggy. Can anyone help me to get it working properly Thanks

  Read the article

• Disable home button in android toddler app?

  - by cmerrell

  I've developed and app that is a slide show of pictures which each play a sound when you tap them. It's like a picture book for ages 2-4. The problem is, since android won't let you capture a home button press and essentially disable it, when parents give the phone to their child to play with unattended (brave parent), the child can inadvertenly exit the app and then make calls or otherwise tweak the phone. There are two other apps that currently have a psuedo fix for this issue. The apps are Toddler Lock and ToddlePhone. I've tried contacting the developers of these apps for some guidance but they haven't been willing to disclose anything, which if fine, but does anyone here have any suggestions? It looks like both of those other apps are acting like a home screen replacement app. When you enable the "childproof mode" on those apps the user is prompted to chose and app for the action and the choices are "Launcher, LauncherPro, etc." plus the toddler app. You then have to make the toddler app the default and voila, the phone is "locked" and can only be "unlocked" using a key combination or touching the four corners of the screen, etc. when you "unlock" the phone. your normal home screen app default restored. You don't even have to make the toddler app the default the next time you enable the "childproof mode". I have read that these two apps have problems with Samsung phones and they can cause an an infinite crash-and-restart-loop that requires a factory reset to fix. Obviously this is not the ideal solution to the problem but it looks like the only one availiable at this point. Does anyone have any ideas on how to implement a "childproof mode"?

  Read the article

• Huge burst of memory in c# service, what could be the cause?

  - by Daniel

  I'm working on a c# service application and i have this problem where out of no where and for no obvious reason, the memory for the process will climb from 150mb to almost 2gb in about 5 seconds and then back to 150mb. But nothing in our system should be using any where near that amount of memory (so its probably a bug somewhere). It might be a tight while true loop somewhere but the cpu usage at the time was very low so i thought i'd look for other ideas. Now the weirder thing is when i compile the service for 64bit, the same massive burst will occur except it exceeded 10gb of ram (paging most of it) and it just caused lots of problems with the computer and everything running on it. After a while it shuts down but it looks like windows is still willing to give it more memory. Would you have any ideas or tools that i can use in order to find this? Yes it has lots of logging however nothing in the logs stand out as to why this is happening. I can run the service in a console app mode, so my next test was going to be running it in visual studio debugger and see if i can find anything. It only happens occasionally but usually about 10-20 minutes after startup. On 32bit mode it cleans up and continues on like normally. 64bit mode it crashes after a while and uses stupid amounts of memory. But i'm really stumped as to why this is happening!!!

  Read the article

• Hide annoying VMware hint "To release input, press Ctrl+Alt"

  - by EMP

  I'm running VMWare Workstation 7 on Windows 7 x64. In the guest OS (also Windows 7 x64) I have VMWare Tools installed, but the VMWare Tools service is disabled. I run the VM in full screen mode and the VMWare toolbar at the top often displays this tooltip: To release input, press Ctrl+Alt This tooltip obscures a part of the VM (often the menu of a program I'm using) and it's annoying as hell. Going out of full screen mode and into it again gets rid of it, but only until I mouse over that toolbar and then it reappears! How do I get rid of it, once and for all? I tried adding hints.hideAll = "TRUE" to the .vmx file for the VM and to preferences.ini and neither of those helped.

  Read the article

• Stretch VMWare Player guest OS to fullscreen

  - by Synetech

  I’m using VMWare Player to play an old 16-bit Windows game. Unfortunately the game uses only 640x480 and I cannot figure out how to stretch the VM window to full-screen on the host. I set the guest OS to 640x480, but the screen is still small, in the middle of the screen as seen in figure 1. I even tried setting the compatibility mode to Windows 95 and 640x480, but it has no effect (figure 2) and looks exactly the same as when I set the VM to full-screen (1366x768 on the laptop) and start the game normally. There are few references to stretching a VM. One page mentions setting a Stretch Guest option, but there is no such option, at least not in VMWare Player 4.0.3. I know that VirtualBox has a stretching option, but I’m trying to find a solution for VMWare (Player, not Workstation). Figure 1: Guest OS is pillar-boxed Figure 2: Using compatibility mode

  Read the article

• How to prevent question mark cursor issue cause be Insert key when doing VNC to a mac?

  - by Sorin Sbarnea

  I found out that when I press the Insert key on the client I will block the OS X VNC server by putting it in a "help mode" where you get the question mark mouse cursor. The mouse works but I cannot use the keyboard anymore. Details: Reconnecting using VNC does not help Normal keyboard is working fine on the mac The only solution in addition to relogin was to stop the VNC server on mac using: killall OSXvnc-server After few seconds it will restart by itself and it will work. I don't like current workaround and looking for something better. Tested with these versions of the VNC client and all put the VNC server in the question mark mode, requiring service restart: Ultr@VNC 1.0.8.2 RealVNC 4.1.3 I know that the problem is caused by the different/bad implementation of the VNC protocol in the server but do you need an workaround?

  Read the article

• Setting up a VPN connection to Amazon VPC - routing

  - by Keeno

  I am having some real issues setting up a VPN between out office and AWS VPC. The "tunnels" appear to be up, however I don't know if they are configured correctly. The device I am using is a Netgear VPN Firewall - FVS336GV2 If you see in the attached config downloaded from VPC (#3 Tunnel Interface Configuration), it gives me some "inside" addresses for the tunnel. When setting up the IPsec tunnels do I use the inside tunnel IP's (e.g. 169.254.254.2/30) or do I use my internal network subnet (10.1.1.0/24) I have tried both, when I tried the local network (10.1.1.x) the tracert stops at the router. When I tried with the "inside" ips, the tracert to the amazon VPC (10.0.0.x) goes out over the internet. this all leads me to the next question, for this router, how do I set up stage #4, the static next hop? What are these seemingly random "inside" addresses and where did amazon generate them from? 169.254.254.x seems odd? With a device like this, is the VPN behind the firewall? I have tweaked any IP addresses below so that they are not "real". I am fully aware, this is probably badly worded. Please if there is any further info/screenshots that will help, let me know. Amazon Web Services Virtual Private Cloud IPSec Tunnel #1 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Your Customer Gateway must be configured with a tunnel interface that is associated with the IPSec tunnel. All traffic transmitted to the tunnel interface is encrypted and transmitted to the Virtual Private Gateway. The Customer Gateway and Virtual Private Gateway each have two addresses that relate to this IPSec tunnel. Each contains an outside address, upon which encrypted traffic is exchanged. Each also contain an inside address associated with the tunnel interface. The Customer Gateway outside IP address was provided when the Customer Gateway was created. Changing the IP address requires the creation of a new Customer Gateway. The Customer Gateway inside IP address should be configured on your tunnel interface. Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.42 Inside IP Addresses - Customer Gateway : 169.254.254.2/30 - Virtual Private Gateway : 169.254.254.1/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: To route traffic between your internal network and your VPC, you will need a static route added to your router. Static Route Configuration Options: - Next hop : 169.254.254.1 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. IPSec Tunnel #2 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.46 Inside IP Addresses - Customer Gateway : 169.254.254.6/30 - Virtual Private Gateway : 169.254.254.5/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: Static Route Configuration Options: - Next hop : 169.254.254.5 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. EDIT #1 After writing this post, I continued to fiddle and something started to work, just not very reliably. The local IPs to use when setting up the tunnels where indeed my network subnets. Which further confuses me over what these "inside" IP addresses are for. The problem is, results are not consistent what so ever. I can "sometimes" ping, I can "sometimes" RDP using the VPN. Sometimes, Tunnel 1 or Tunnel 2 can be up or down. When I came back into work today, Tunnel 1 was down, so I deleted it and re-created it from scratch. Now I cant ping anything, but Amazon AND the router are telling me tunnel 1/2 are fine. I guess the router/vpn hardware I have just isnt up to the job..... EDIT #2 Now Tunnel 1 is up, Tunnel 2 is down (I didn't change any settings) and I can ping/rdp again. EDIT #3 Screenshot of route table that the router has built up. Current state (tunnel 1 still up and going string, 2 is still down and wont re-connect)

  Read the article

• Why do I start at privilege level 1 when logging into a Cisco ASA 5510?

  - by Alain O'Dea

  I have created a test user that is set to privilege 15 in the config: username test password **************** encrypted privilege 15 When I log in to the ASA 5510 I am in privilege 1 according to sh curpriv: login as: test [email protected]'s password: Type help or '?' for a list of available commands. asa> sh curpriv Username : test Current privilege level : 1 Current Mode/s : P_UNPR Attempting enable fails even though I know I have the correct enable password: asa> en Password: ************************* Password: ************************* Password: ************************* Access denied. Logging in from unprivileged puts me on privilege 15 and I can do as a please: asa> login Username : test Pasword: ************************* asa> sh curpriv Current privilege level : 15 Current Mode/s : P_PRIV asa> The only thing I can track this to is a configuration change I made where I removed a VPN user we no longer needed. Why do I start at privilege level 1 when logging into a Cisco ASA 5510?

  Read the article

• IIS 7.5 FTPS external access - 534 Policy requires SSL

  - by markmnl

  I have setup a FTP site that requires SSL but when I try connect to it externally I get the error: 220 Microsoft FTP Service 534 Policy requires SSL. I know - I set it so! Why doesnt it fetch the SSL cert from the site and allow me to logon?! (Incidentally beware of all the tutorials that Allow but do not Require SSL - while that will solve the problem it will be because SSL is not being used!). I suspect it may be I need a client that supports FTPS (FTP over SSL) and Windows explorer just uses IE which does not. But trying FileZilla and WinSCP I get a little further but then it hangs on TLS/SSL negotiation expecting a response from the server.... UPDATE: I have tried (from: http://learn.iis.net/page.aspx/309/configuring-ftp-firewall-settings/): Configure the Passive Port Range for the FTP Service. Configure the external IPv4 Address for a Specific FTP Site. Configure the firewall to allow the FTP service to listen on all ports that it opens. Disabling stateful FTP filtering so that Windows Firewall will not block FTP traffic. And still I get (in FileZilla trying both Active and Passive): Status: Connecting to 203.x.x.x:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: AUTH TLS Response: 234 AUTH command ok. Expecting TLS Negotiation. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server The Windows firewall logs unhelpfully have nothing to say.. UPDATE2: Turning the firewall off does not resolve the problem. I cannot believe how difficult it is to get something so simple to work and even once following the documentation it does not work. UPDATE3: Running FileZilla locally connecting through the loopback works in Active mode, in Passive mode I get up to: Command: LIST Response: 150 Opening BINARY mode data connection. Error: GnuTLS error -53: Error in the push function. Turning the firewall off at both ends I can still not connect the client and get the same error as above.

  Read the article

• Most basic, low power home surveillance system

  - by cbp

  I am thinking of setting up a simple but effective surveillance system for my house that is: Very low powered (preferably no PCs left running out of stand-by mode) Cheap. When motion (or sound) is detected, I would like it to: Send an email/phone alert to me Record and upload video to the web (in case they steal the camera) So I imagine a system where I leave a netbook PC in stand-by mode and have it woken up by a motion detector. This initiates software to send alerts and periodically upload recorded video to the web. The software part is easy for me, but I'm not really a gadget-man so I'd like some advice on using a motion sensor of some sort to wake up the PC. Does anyone have some good advice? I know there are a couple of questions dealing with this topic already (see here: http://superuser.com/questions/3054/looking-for-a-moderately-priced-home-surveillance-setup, and here: http://superuser.com/questions/2929/can-you-suggest-a-great-home-security-setup-anti-burglars-e-t-c) - I am seeking more specific information with this question.

  Read the article

• Cisco SR520w FE - WAN Port Stops Working

  - by Mike Hanley

  I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

  Read the article

• SSRS 2008 & MOSS 2007 Alternate Access Mapping Problem

  - by Mauro

  I have a MOSS Server with SSRS 2008 Ent Ed configured in Sharepoint Integrated mode. It all works well as http://servername:88/ on the default host header. MOSS works fine using the external host name too on the intranet AAM field (http://site.domain.com/) however SSRS fails on the same url with the message: An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. I think the issue is further complicated by our Windows 2008 infrastructure in which we've never been able to get SPN's working for Kerberos. SQL Server however, is on the same machine so I dont think it is a kerberos double hop issue. Extra info MOSS/SSRS are on a VM running Windows 2003 R2 VM is hosted on Win2008 HyperV DC is on Windows 2008 SBS

  Read the article

• Accidentally Removed Permissions for the XP SP3 Registry key HKEY_CLASSES_ROOT! Workaround Please!

  - by Praveen Kumar

  This is Praveen and I am using Microsoft Windows XP SP3 Build 2600. I had problems with using Microsoft Office 2010. It was keeping on saying, "Please wait while windows configures Microsoft Office Professional Plus 2010". After seeing this link: http://social.answers.microsoft.com/Forums/en-US/outlookcontact/thread/6e9c3f2e-010a-4b74-b433-0c41548ee468?prof=required I thought of giving the Registry Key: HKEY_CLASSES_ROOT, full access permissions for Everyone. I went to the registry, right-clicked on HKEY_CLASSES_ROOT and clicked on Permissions. I added Everyone and gave Full Control to the ACL and clicked on Apply. Also I checked "Replace permission entries on all child objects with entries shown here that apply to child objects." After a long time, it said with an error, cannot replace for few entries. Now, the key, HKEY_CLASSES_ROOT has no access to any user. My system is not starting up. Some of my friends asked me to try the Last Known Good Configuration. Even that did not work out. When I tried to open in the Safe Mode, I got only one driver to load and even that didn't load well. Another friend suggested me to put the Setup disk and reinstall the OS. I tried that and after completing the "Installing Device Drivers" part, when it started "Installing Network", the system is getting restarted. Now, the setup is also half way through and even if I open in Safe Mode to try System Restore, it popped up a message saying, "Setup cannot run under Safe Mode. Setup will restart now." and the system is restarting. All my official files and my software, which I developed for Registry Security, resides in my system now. I am unable to access the system and I want it to be working to submit the project, as the deadline is this week. I had no better solutions from elsewhere. Can anyone please help me out with this issue. If it is possible to open the registry editor's stored file from another system and restore the access permissions, I hope it would solve the problem. Please do help me. Thanking You, Praveen.

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >