Search Results

Search found 3342 results on 134 pages for 'wish you all peace'.

Page 117/134 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Clean up after Visual Studio

  - by psheriff

  As programmer’s we know that if we create a temporary file during the running of our application we need to make sure it is removed when the application or process is complete. We do this, but why can’t Microsoft do it? Visual Studio leaves tons of temporary files all over your hard drive. This is why, over time, your computer loses hard disk space. This blog post will show you some of the most common places where these files are left and which ones you can safely delete..NET Left OversVisual Studio is a great development environment for creating applications quickly. However, it will leave a lot of miscellaneous files all over your hard drive. There are a few locations on your hard drive that you should be checking to see if there are left-over folders or files that you can delete. I have attempted to gather as much data as I can about the various versions of .NET and operating systems. Of course, your mileage may vary on the folders and files I list here. In fact, this problem is so prevalent that PDSA has created a Computer Cleaner specifically for the Visual Studio developer.  Instructions for downloading our PDSA Developer Utilities (of which Computer Cleaner is one) are at the end of this blog entry.Each version of Visual Studio will create “temporary” files in different folders. The problem is that the files created are not always “temporary”. Most of the time these files do not get cleaned up like they should. Let’s look at some of the folders that you should periodically review and delete files within these folders.Temporary ASP.NET FilesAs you create and run ASP.NET applications from Visual Studio temporary files are placed into the <sysdrive>:\Windows\Microsoft.NET\Framework[64]\<vernum>\Temporary ASP.NET Files folder. The folders and files under this folder can be removed with no harm to your development computer. Do not remove the "Temporary ASP.NET Files" folder itself, just the folders underneath this folder. If you use IIS for ASP.NET development, you may need to run the iisreset.exe utility from the command prompt prior to deleting any files/folder under this folder. IIS will sometimes keep files in use in this folder and iisreset will release the locks so the files/folders can be deleted.Website CacheThis folder is similar to the ASP.NET Temporary Files folder in that it contains files from ASP.NET applications run from Visual Studio. This folder is located in each users local settings folder. The location will be a little different on each operating system. For example on Windows Vista/Windows 7, the folder is located at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\WebsiteCache. If you are running Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\Microsoft\WebsiteCache. Check these locations periodically and delete all files and folders under this directory.Visual Studio BackupThis backup folder is used by Visual Studio to store temporary files while you develop in Visual Studio. This folder never gets cleaned out, so you should periodically delete all files and folders under this directory. On Windows XP, this folder is located at <sysdrive>:\Documents and Settings\<UserName>\My Documents\Visual Studio 200[5|8]\Backup Files. On Windows Vista/Windows 7 this folder is located at <sysdrive>:\Users\<UserName>\Documents\Visual Studio 200[5|8]\.Assembly CacheNo, this is not the global assembly cache (GAC). It appears that this cache is only created when doing WPF or Silverlight development with Visual Studio 2008 or Visual Studio 2010. This folder is located in <sysdrive>:\ Users\<UserName>\AppData\Local\assembly\dl3 on Windows Vista/Windows 7. On Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\assembly. If you have not done any WPF or Silverlight development, you may not find this particular folder on your machine.Project AssembliesThis is yet another folder where Visual Studio stores temporary files. You will find a folder for each project you have opened and worked on. This folder is located at <sysdrive>:\Documents and Settings\<UserName>Local Settings\Application Data\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies on Windows XP. On Microsoft Vista/Windows 7 you will find this folder at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies.Remember not all of these folders will appear on your particular machine. Which ones do show up will depend on what version of Visual Studio you are using, whether or not you are doing desktop or web development, and the operating system you are using.SummaryTaking the time to periodically clean up after Visual Studio will aid in keeping your computer running quickly and increase the space on your hard drive. Another place to make sure you are cleaning up is your TEMP folder. Check your OS settings for the location of your particular TEMP folder and be sure to delete any files in here that are not in use. I routinely clean up the files and folders described in this blog post and I find that I actually eliminate errors in Visual Studio and I increase my hard disk space.NEW! PDSA has just published a “pre-release” of our PDSA Developer Utilities at http://www.pdsa.com/DeveloperUtilities that contains a Computer Cleaner utility which will clean up the above-mentioned folders, as well as a lot of other miscellaneous folders that get Visual Studio build-up. You can download a free trial at http://www.pdsa.com/DeveloperUtilities. If you wish to purchase our utilities through the month of November, 2011 you can use the RSVP code: DUNOV11 to get them for only $39. This is $40 off the regular price.NOTE: You can download this article and many samples like the one shown in this blog entry at my website. http://www.pdsa.com/downloads. Select “Tips and Tricks”, then “Developer Machine Clean Up” from the drop down list.Good Luck with your Coding,Paul Sheriff** SPECIAL OFFER FOR MY BLOG READERS **We frequently offer a FREE gift for readers of my blog. Visit http://www.pdsa.com/Event/Blog for your FREE gift!

  Read the article

• Open Source but not Free Software (or vice versa)

  - by TRiG

  The definition of "Free Software" from the Free Software Foundation: “Free software” is a matter of liberty, not price. To understand the concept, you should think of “free” as in “free speech,” not as in “free beer.” Free software is a matter of the users' freedom to run, copy, distribute, study, change and improve the software. More precisely, it means that the program's users have the four essential freedoms: The freedom to run the program, for any purpose (freedom 0). The freedom to study how the program works, and change it to make it do what you wish (freedom 1). Access to the source code is a precondition for this. The freedom to redistribute copies so you can help your neighbor (freedom 2). The freedom to distribute copies of your modified versions to others (freedom 3). By doing this you can give the whole community a chance to benefit from your changes. Access to the source code is a precondition for this. A program is free software if users have all of these freedoms. Thus, you should be free to redistribute copies, either with or without modifications, either gratis or charging a fee for distribution, to anyone anywhere. Being free to do these things means (among other things) that you do not have to ask or pay for permission to do so. The definition of "Open Source Software" from the Open Source Initiative: Open source doesn't just mean access to the source code. The distribution terms of open-source software must comply with the following criteria: Free Redistribution The license shall not restrict any party from selling or giving away the software as a component of an aggregate software distribution containing programs from several different sources. The license shall not require a royalty or other fee for such sale. Source Code The program must include source code, and must allow distribution in source code as well as compiled form. Where some form of a product is not distributed with source code, there must be a well-publicized means of obtaining the source code for no more than a reasonable reproduction cost preferably, downloading via the Internet without charge. The source code must be the preferred form in which a programmer would modify the program. Deliberately obfuscated source code is not allowed. Intermediate forms such as the output of a preprocessor or translator are not allowed. Derived Works The license must allow modifications and derived works, and must allow them to be distributed under the same terms as the license of the original software. Integrity of The Author's Source Code The license may restrict source-code from being distributed in modified form only if the license allows the distribution of "patch files" with the source code for the purpose of modifying the program at build time. The license must explicitly permit distribution of software built from modified source code. The license may require derived works to carry a different name or version number from the original software. No Discrimination Against Persons or Groups The license must not discriminate against any person or group of persons. No Discrimination Against Fields of Endeavor The license must not restrict anyone from making use of the program in a specific field of endeavor. For example, it may not restrict the program from being used in a business, or from being used for genetic research. Distribution of License The rights attached to the program must apply to all to whom the program is redistributed without the need for execution of an additional license by those parties. License Must Not Be Specific to a Product The rights attached to the program must not depend on the program's being part of a particular software distribution. If the program is extracted from that distribution and used or distributed within the terms of the program's license, all parties to whom the program is redistributed should have the same rights as those that are granted in conjunction with the original software distribution. License Must Not Restrict Other Software The license must not place restrictions on other software that is distributed along with the licensed software. For example, the license must not insist that all other programs distributed on the same medium must be open-source software. License Must Be Technology-Neutral No provision of the license may be predicated on any individual technology or style of interface. These definitions, although they derive from very different ideologies, are broadly compatible, and most Free Software is also Open Source Software and vice versa. I believe, however, that it is possible for this not to be the case: It is possible for software to be Open Source without being Free, or to be Free without being Open Source. Questions Is my belief correct? Is it possible for software to fall into one camp and not the other? Does any such software actually exist? Please give examples. Clarification I've already accepted an answer now, but I seem to have confused a lot of people, so perhaps a clarification is in order. I was not asking about the difference between copyleft (or "viral", though I don't like that term) and non-copyleft ("permissive") licenses. Nor was I asking about your personal idiosyncratic definitions of "Free" and "Open". I was asking about "Free Software as defined by the FSF" and "Open Source Software as defined by the OSI". Are the two always the same? Is it possible to be one without being the other? And the answer, it seems, is that it's impossible to be Free without being Open, but possible to be Open without being Free. Thank you everyone who actually answered the question.

  Read the article

• Games to Vista Game explorer with Inno Setup

  - by Kraemer

  Ok, i'm trying to force my inno setup installer to add a shortcut of my game to Vista Games Explorer. Theoretically this should do the trick: [Files] Source: "GameuxInstallHelper.dll"; DestDir: "{app}"; Flags: ignoreversion overwritereadonly; [Registry] Root: HKLM; Subkey: SOFTWARE\dir\dir; Flags: uninsdeletekeyifempty Root: HKLM; Subkey: SOFTWARE\dir\dir; ValueName: Path; ValueType: String; ValueData: {app}; Flags: uninsdeletekey Root: HKLM; Subkey: SOFTWARE\dir\dir; ValueName: AppFile; ValueType: String; ValueData:{app}\executable.exe ; Flags: uninsdeletekey [CustomMessages] en.Local=en en.removemsg=Do you wish to remove game saves and settings? en.taskentry=Play [Code] const PlayTask = 0; AllUsers = 2; Current = 3; type TGUID = record Data1: Cardinal; Data2, Data3: Word; Data4: array [0..7] of char; end; var GUID: TGUID; function GetDC(HWND: DWord): DWord; external '[email protected] stdcall'; function GetDeviceCaps(DC: DWord; Index: Integer): Integer; external '[email protected] stdcall'; function ReleaseDC(HWND: DWord;DC: DWord): Integer; external '[email protected] stdcall'; function ShowWindow(hWnd: DWord; nCmdShow: Integer): boolean; external '[email protected] stdcall'; function SetWindowLong(hWnd: DWord; nIndex: Integer; dwNewLong: Longint):Longint; external '[email protected] stdcall'; function GenerateGUID(var GUID: TGUID): Cardinal; external 'GenerateGUID@files:GameuxInstallHelper.dll stdcall setuponly'; function AddToGameExplorer(Binary: String; Path: String; InstallType: Integer; var GUID: TGUID): Cardinal; external 'AddToGameExplorerW@files:GameuxInstallHelper.dll stdcall setuponly'; function CreateTask(InstallType: Integer; var GUID: TGUID; TaskType: Integer; TaskNumber: Integer; TaskName: String; Binary: String; Parameters: String): Cardinal; external 'CreateTaskW@files:GameuxInstallHelper.dll stdcall setuponly'; function RetrieveGUIDForApplication(Binary: String; var GUID: TGUID): Cardinal; external 'RetrieveGUIDForApplicationW@{app}\GameuxInstallHelper.dll stdcall uninstallonly'; function RemoveFromGameExplorer(var GUID: TGUID): Cardinal; external 'RemoveFromGameExplorer@{app}\GameuxInstallHelper.dll stdcall uninstallonly'; function RemoveTasks(var GUID: TGUID): Cardinal; external 'RemoveTasks@{app}\GameuxInstallHelper.dll stdcall uninstallonly'; function InitializeSetup(): Boolean; var appath: string; ResultCode: Integer; begin if RegKeyExists(HKEY_LOCAL_MACHINE, 'SOFTWARE\dir\dir') then begin RegQueryStringValue(HKEY_LOCAL_MACHINE, 'SOFTWARE\dir\dir', 'Path', appath) Exec((appath +'\unins000.exe'), '', '', SW_SHOW, ewWaitUntilTerminated, ResultCode) end else begin Result := TRUE end; end; procedure CurUninstallStepChanged(CurUninstallStep: TUninstallStep); begin if CurUninstallStep = usUninstall then begin if GetWindowsVersion shr 24 > 5 then begin RetrieveGUIDForApplication(ExpandConstant('{app}\AWL_Release.dll'), GUID); RemoveFromGameExplorer(GUID); RemoveTasks(GUID); UnloadDll(ExpandConstant('{app}\GameuxInstallHelper.dll')); end; end; if CurUninstallStep = usPostUninstall then begin if MsgBox(ExpandConstant('{cm:removemsg}'), mbConfirmation, MB_YESNO)=IDYES then begin DelTree(ExpandConstant('{app}'), True, True, True); end; end; end; procedure CurStepChanged(CurStep: TSetupStep); begin if GetWindowsVersion shr 24 > 5 then begin if CurStep = ssInstall then GenerateGUID(GUID); if CurStep = ssPostInstall then begin AddToGameExplorer(ExpandConstant('{app}\AWL_Release.dll'), ExpandConstant('{app}'), Current, GUID); CreateTask(3, GUID, PlayTask, 0, ExpandConstant('{cm:taskentry}'), ExpandConstant('{app}\executable.exe'), ''); CreateTask(3, GUID, 1, 0, 'Game Website', 'http://www.gamewebsite.com/', ''); end; end; end; The installer works just fine, but it doesn't place a shortcut of my game to Games explorer. Since i believe that the problem is on the binary file i guess for that part i should ask for some help. So, can anyone please give me a hand here?

  Read the article

• How to Automate your Database Documentation

  - by Jonathan Hickford

  In my previous post, “Automating Deployments with SQL Compare command line” I looked at how teams can automate the deployment and post deployment validation of SQL Server databases using the command line versions of Red Gate tools. In this post I’m looking at another use for the command line tools, namely using them to generate up-to-date documentation with every database change. There are many reasons why up-to-date documentation is valuable. For example when somebody new has to work on or administer a database for the first time, or when a new database comes into service. Having database documentation reduces the risks of making incorrect decisions when making changes. Documentation is very useful to business intelligence analysts when writing reports, for example in SSRS. There are a couple of great examples talking about why up to date documentation is valuable on this site:  Database Documentation – Lands of Trolls: Why and How? and Database Documentation Using SQL Doc. The short answer is that it can save you time and reduce risk when you need that most! SQL Doc is a fast simple tool that automatically generates database documentation. It can create documents in HTML, Word or pdf files. The documentation contains information about object definitions and dependencies, along with any other information you want to associate with each object. The SQL Doc GUI, which is included in Red Gate’s SQL Developer Bundle and SQL Toolbelt, allows you to add additional notes to objects, and customise which objects are shown in the docs.  These settings can be saved as a .sqldoc project file. The SQL Doc command line can use this project file to automatically update the documentation every time the database is changed, ensuring that documentation that is always up to date. The simplest way to keep documentation up to date is probably to use a scheduled task to run a script every day. However if you have a source controlled database, or are using a Continuous Integration (CI) server or a build server, it may make more sense to use that instead. If  you’re using SQL Source Control or SSDT Database Projects to help version control your database, you can automatically update the documentation after each change is made to the source control repository that contains your database. To get this automation in place,  you can use the functionality of a Continuous Integration (CI) server, which can trigger commands to run when a source control repository has changed. A CI server will also capture and save the documentation that is created as an artifact, so you can always find the exact documentation for a specific version of the database. This forms an always up to date data dictionary. If you don’t already have a CI server in place there are several you can use, such as the free open source Jenkins or the free starter editions of TeamCity. I won’t cover setting these up in this article, but there is information about using CI servers for automating database tasks on the Red Gate Database Delivery webpage. You may be interested in Red Gate’s SQL CI utility (part of the SQL Automation Pack) which is an easy way to update a database with the latest changes from source control. The PowerShell example below shows how to create the documentation from a database. That database might be your integration database or a shared development database that is always up to date with the latest changes. $serverName = "server\instance" $databaseName = "databaseName" # If you want to document multiple databases use a comma separated list $userName = "username" $password = "password" # Path to SQLDoc.exe $SQLDocPath = "C:\Program Files (x86)\Red Gate\SQL Doc 3\SQLDoc.exe" $arguments = @( "/server:$($serverName)", "/database:$($databaseName)", "/username:$($userName)", "/password:$($password)", "/filetype:html", "/outputfolder:.", # "/project:$args[0]", # If you already have a .sqldoc project file you can pass it as an argument to this script. Values in the project will be overridden with any options set on the command line "/name:$databaseName Report", "/copyrightauthor:$([Environment]::UserName)" ) write-host $arguments & $SQLDocPath $arguments There are several options you can set on the command line to vary how your documentation is created. For example, you can document multiple databases or exclude certain types of objects. In the example above, we set the name of the report to match the database name, and use the current Windows user as the documentation author. For more examples of how you can customise the report from the command line please see the SQL Doc command line documentation If you already have a .sqldoc project file, or wish to further customise the report by including or excluding specific objects, you can use this project on the command line. Any settings you specify on the command line will override the defaults in the project. For details of what you can customise in the project please see the SQL Doc project documentation. In the example above, the line to use a project is commented out, but you can uncomment this line and then pass a path to a .sqldoc project file as an argument to this script.  Conclusion Keeping documentation about your databases up to date is very easy to set up using SQL Doc and PowerShell. By using a CI server to run this process you can trigger the documentation to be run on every change to a source controlled database, and keep historic documentation available. If you are considering more advanced database automation, e.g. database unit testing, change script generation, deploying to large numbers of targets and backup/verification, please email me at [email protected] for further script samples or if you have any questions.

  Read the article

• Preview and Purchase Ebooks with Kindle for PC

  - by Matthew Guay

  Want to look over a new book, or buy it immediately in ebook format?  Here’s how you can preview and purchase most new books from your PC the easy way. Most new books, including almost all New York Times Bestsellers, are available in ebook format from Amazon’s Kindle store.  The Kindle store also includes numerous free ebooks, including out-of-print classics and a surprising amount of recent books.  With the free Kindle for PC reader, you can read any of these ebooks without having to purchase a Kindle device. Preview Ebooks Before you Purchase Sometimes, it can be hard to know if you want to purchase a new book without reading some of it first.  With Kindle for PC, however, you can download a sample of any ebook available for free.  The sample usually includes the table of contents, forward or introduction, and often part or all of the first chapter. To get an ebook sample, find the book you want in the Kindle store (link below). Now, under the Try it free box, select the correct computer or device to send the sample to, and click Send Sample now. Amazon will thank you for your order, even though this is only a free preview.  Click the Go to Kindle for PC button to open Kindle and read your ebook preview.   Or, if Kindle is already running, press the Refresh button in the top right corner to check for new ebooks and previews. Kindle will synchronize and download the previews you selected. The most recently downloaded items show up on the top left.  All sample books have a red “Sample” bar on the bottom of their cover, and they also include links to Buy or view more info about it on it’s cover.  Double-click your sample to start reading it. Your ebook sample will usually open at the introduction or beginning of the first chapter, but you can also view the index, cover, and more. When you reach the end of the sample book, you can click a link to buy the book or view more details about it.  Strangely, both of these links currently take you to the ebook’s page on Amazon.com, but perhaps in the future the Buy link will directly let you purchase the book. Or, you can also click Buy Now on a sample book directly from your Kindle library. If you clicked one of these links, you will be returned to the ebook’s page on Amazon.  Choose the PC or Kindle you want the book delivered to, and this time, select Buy Now with 1-Click. Add your payment info if you’re not already setup for 1-Click Shopping, and then you’ll be shown the same Thank you page as before.  Refresh Kindle for PC, and your new ebook will automatically download.  Strangely, the sample ebook is not automatically removed, so you can right-click on the sample and select Delete this Book.  Additionally, your last-read page in the sample is not synced to the purchased book, so you may have to find your place again. Now, enjoy your full ebook! Download Free Books for Kindle The Kindle Store has an amazing amount of free ebooks.  Some free books may only be free for a limited time as a promotion, while others, such as old classics, may always be free.  Either which way, once you download it, you can keep it forever. When you find a free ebook you want, select the Kindle or PC you want to download it to and click “Buy now with 1-Click”.  Notice that this book shows it’s price is $0.00, but the button still says Buy now.  Rest assured, if the book’s price show up as $0.00, you will not be charged anything for downloading it. Your ebook will download as usual after your next refresh.  Note that you can still download the sample first if you want, but since the book is free, just download the whole thing and delete it if you don’t want it. Redownload your Purchased or Free Books If you install Kindle on a new PC or delete a book from your library, you can always re-download it from your Amazon account.  Browse to the Manage your Kindle page on Amazon (link below) sign in with your Amazon account, and scroll down to the list of your purchased content. Select the book you wish to download, then choose the Kindle or PC you want to download it to and press Go. Note: There is a “Delete this title” button right below this.  If you press the Delete button, you will not ever be able to re-download it. Or, you can download the book directly from the Archived Items tab in Kindle on your other PC. And, if you have your Kindle content on multiple computers, your reading will be synced via Whispersync.  You can start reading on your desktop, and then resume where you left off from your laptop. Conclusion With these tips and tricks, it is much easier to preview and purchase new books, find and download free ebooks, and re-download any you’ve deleted from your PC.  Have fun filling up your digital library! Links Manage your Kindle account Similar Articles Productive Geek Tips Read Mobi eBooks on Kindle for PCRead Kindle Books On Your Computer with Kindle for PCHow to See Where a TinyUrl Is Really Linking ToEdit Microsoft Word 2007 Documents in Print PreviewWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides

  Read the article

• Guest Post: Instantiate SharePoint Workflow On Item Deleted

  - by Brian Jackett

  In this post, guest author Lucas Eduardo Silva will walk you through the steps of instantiating a workflow using an item event receiver from a custom list.  The ItemDeleting event will require approval via the workflow. Foreword     As you may have read recently, I injured my right hand and have had it in a cast for the past 3 weeks.  Due to this I planned to reduce my blogging while my hand heals.  As luck would have it, I was actually approached by someone who asked if they could be a guest author on my blog.  I’ve never had a guest author, but considering my injury now seemed like as good a time as ever to try it out. About the Guest Author     Lucas Eduardo Silva (email) works for CPM Braxis, a sibling company to my employer Sogeti in the CapGemini family.  Lucas and I exchanged emails a few times after one of my  recent posts and continued into various topics.  When I posted that I had injured my hand, Lucas mentioned that he had a post idea that he would like to publish and asked if it could be published on my blog.  The below content is the result of that collaboration. The Problem     Lucas has a big problem.  He has a workflow that he wants to fire every time an item is deleted from a custom list. He has already created the association in the "item deleting event", but needs to approve the deletion but the workflow is finishing first. Lucas put an onWorkflowItemChanged wait for the change of status approval, but it is not being hit. The Solution Note: This solution assumes you have the Visual Studio Extensions for Windows SharePoint Services (VSeWSS) installed to access the SharePoint project templates within VIsual Studio. 1 - Create a workflow that will be activated by ItemEventReceiver. 2 - Create the list by Visual Studio clicking in File -> New -> Project. Select SharePoint, then List Definition. 3 - Select the type of document to be created. List, Document Library, Wiki, Tasks, etc.. 4 - Visual Studio creates the file ItemEventReceiver.cs with all possible events in a list. 5 – In the workflow project, open the workflow.xml and copy the ID. 6 - Uncomment the ItemDeleting and insert the following code by replacing the ID that you copied earlier.   //Cancel the Exclusion properties.Cancel = true;   //Activating Exclusion Workflow SPWorkflowManager workflowManager = properties.ListItem.Web.Site.WorkflowManager;   SPWorkflowAssociation wfAssociation = properties.ListItem.ParentList.WorkflowAssociations. GetAssociationByBaseID(new Guid("37b5aea8-792a-4ded-be25-d283d9fe1f9d"));   workflowManager.StartWorkflow(properties.ListItem, wfAssociation, wfAssociation.AssociationData, true);   properties.Status = SPEventReceiverStatus.CancelNoError;   7 - properties.Cancel cancels the event being activated and executes the code that is inside the event. In the example, it cancels the deletion of the item to start the workflow that will be active as an association list with the workflow ID. 8 - Create and deploy the workflow and the list for SharePoint. 9 - Create a list through the model that was created. 10 - Enable the workflow in the list and Congratulations! Every time you try to delete the item the workflow is activated. TIP: If you really want to delete the item after the workflow is done you will have to delete the item by the workflow.   this.workflowProperties.Site.AllowUnsafeUpdates = true; this.workflowProperties.Item.Delete(); this.workflowProperties.List.Update();   Conclusion     In this guest post Lucas took you through the steps of creating an item deletion approval workflow with an event receiver.  This was also the first time I’ve had a guest author on this blog.  Many thanks to Lucas for putting together this content and offering it.  I haven’t decided how I’d handle future guest authors, mostly because I don’t know if there are others who would want to submit content.  If you do have something that you would like to guest author on my blog feel free to drop me a line and we can discuss.  As a disclaimer, there are no guarantees that it will be published though.  For now enjoy Lucas’ post and look for my return to regular blogging soon.         -Frog Out   <Update 1> If you wish to contact Lucas you can reach him at [email protected] </Update 1>

  Read the article

• SQL SERVER – Parsing SSIS Catalog Messages – Notes from the Field #030

  - by Pinal Dave

  [Note from Pinal]: This is a new episode of Notes from the Field series. SQL Server Integration Service (SSIS) is one of the most key essential part of the entire Business Intelligence (BI) story. It is a platform for data integration and workflow applications. The tool may also be used to automate maintenance of SQL Server databases and updates to multidimensional cube data. In this episode of the Notes from the Field series I requested SSIS Expert Andy Leonard to discuss one of the most interesting concepts of SSIS Catalog Messages. There are plenty of interesting and useful information captured in the SSIS catalog and we will learn together how to explore the same. The SSIS Catalog captures a lot of cool information by default. Here’s a query I use to parse messages from the catalog.operation_messages table in the SSISDB database, where the logged messages are stored. This query is set up to parse a default message transmitted by the Lookup Transformation. It’s one of my favorite messages in the SSIS log because it gives me excellent information when I’m tuning SSIS data flows. The message reads similar to: Data Flow Task:Information: The Lookup processed 4485 rows in the cache. The processing time was 0.015 seconds. The cache used 1376895 bytes of memory. The query: USE SSISDB GO DECLARE @MessageSourceType INT = 60 DECLARE @StartOfIDString VARCHAR(100) = 'The Lookup processed ' DECLARE @ProcessingTimeString VARCHAR(100) = 'The processing time was ' DECLARE @CacheUsedString VARCHAR(100) = 'The cache used ' DECLARE @StartOfIDSearchString VARCHAR(100) = '%' + @StartOfIDString + '%' DECLARE @ProcessingTimeSearchString VARCHAR(100) = '%' + @ProcessingTimeString + '%' DECLARE @CacheUsedSearchString VARCHAR(100) = '%' + @CacheUsedString + '%' SELECT operation_id , SUBSTRING(MESSAGE, (PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1)) - (PATINDEX(@StartOfIDSearchString, MESSAGE) + LEN(@StartOfIDString) + 1))) AS LookupRowsCount , SUBSTRING(MESSAGE, (PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1)) - (PATINDEX(@ProcessingTimeSearchString, MESSAGE) + LEN(@ProcessingTimeString) + 1))) AS LookupProcessingTime , CASE WHEN (CONVERT(numeric(3,3),SUBSTRING(MESSAGE, (PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1)) - (PATINDEX(@ProcessingTimeSearchString, MESSAGE) + LEN(@ProcessingTimeString) + 1))))) = 0 THEN 0 ELSE CONVERT(bigint,SUBSTRING(MESSAGE, (PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1)) - (PATINDEX(@StartOfIDSearchString, MESSAGE) + LEN(@StartOfIDString) + 1)))) / CONVERT(numeric(3,3),SUBSTRING(MESSAGE, (PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1)) - (PATINDEX(@ProcessingTimeSearchString, MESSAGE) + LEN(@ProcessingTimeString) + 1)))) END AS LookupRowsPerSecond , SUBSTRING(MESSAGE, (PATINDEX(@CacheUsedSearchString,MESSAGE) + LEN(@CacheUsedString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@CacheUsedSearchString,MESSAGE) + LEN(@CacheUsedString) + 1)) - (PATINDEX(@CacheUsedSearchString, MESSAGE) + LEN(@CacheUsedString) + 1))) AS LookupBytesUsed ,CASE WHEN (CONVERT(bigint,SUBSTRING(MESSAGE, (PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1)) - (PATINDEX(@StartOfIDSearchString, MESSAGE) + LEN(@StartOfIDString) + 1)))))= 0 THEN 0 ELSE CONVERT(bigint,SUBSTRING(MESSAGE, (PATINDEX(@CacheUsedSearchString,MESSAGE) + LEN(@CacheUsedString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@CacheUsedSearchString,MESSAGE) + LEN(@CacheUsedString) + 1)) - (PATINDEX(@CacheUsedSearchString, MESSAGE) + LEN(@CacheUsedString) + 1)))) / CONVERT(bigint,SUBSTRING(MESSAGE, (PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1)) - (PATINDEX(@StartOfIDSearchString, MESSAGE) + LEN(@StartOfIDString) + 1)))) END AS LookupBytesPerRow FROM [catalog].[operation_messages] WHERE message_source_type = @MessageSourceType AND MESSAGE LIKE @StartOfIDSearchString GO Note that you have to set some parameter values: @MessageSourceType [int] – represents the message source type value from the following results: Value     Description 10           Entry APIs, such as T-SQL and CLR Stored procedures 20           External process used to run package (ISServerExec.exe) 30           Package-level objects 40           Control Flow tasks 50           Control Flow containers 60           Data Flow task 70           Custom execution message Note: Taken from Reza Rad’s (excellent!) helper.MessageSourceType table found here. @StartOfIDString [VarChar(100)] – use this to uniquely identify the message field value you wish to parse. In this case, the string ‘The Lookup processed ‘ identifies all the Lookup Transformation messages I desire to parse. @ProcessingTimeString [VarChar(100)] – this parameter is message-specific. I use this parameter to specifically search the message field value for the beginning of the Lookup Processing Time value. For this execution, I use the string ‘The processing time was ‘. @CacheUsedString [VarChar(100)] – this parameter is also message-specific. I use this parameter to specifically search the message field value for the beginning of the Lookup Cache  Used value. It returns the memory used, in bytes. For this execution, I use the string ‘The cache used ‘. The other parameters are built from variations of the parameters listed above. The query parses the values into text. The string values are converted to numeric values for ratio calculations; LookupRowsPerSecond and LookupBytesPerRow. Since ratios involve division, CASE statements check for denominators that equal 0. Here are the results in an SSMS grid: This is not the only way to retrieve this information. And much of the code lends itself to conversion to functions. If there is interest, I will share the functions in an upcoming post. If you want to get started with SSIS with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SSIS

  Read the article

• Windows Azure End to End Examples

  - by BuckWoody

  I’m fascinated by the way people learn. I’m told there are several methods people use to understand new information, from reading to watching, from experiencing to exploring. Personally, I use multiple methods of learning when I encounter a new topic, usually starting with reading a bit about the concepts. I quickly want to put those into practice, however, especially in the technical realm. I immediately look for examples where I can start trying out the concepts. But I often want a “real” example – not just something that represents the concept, but something that is real-world, showing some feature I could actually use. And it’s no different with the Windows Azure platform – I like finding things I can do now, and actually use. So when I started learning Windows Azure, I of course began with the Windows Azure Training Kit – which has lots of examples and labs, presentations and so on. But from there, I wanted more examples I could learn from, and eventually teach others with. I was asked if I would write a few of those up, so here are the ones I use. CodePlex CodePlex is Microsoft’s version of an “Open Source” repository. Anyone can start a project, add code, documentation and more to it and make it available to the world, free of charge, using various licenses as they wish. Microsoft also uses this location for most of the examples we publish, and sample databases for SQL Server. If you search in CodePlex for “Azure”, you’ll come back with a list of projects that folks have posted, including those of us at Microsoft. The source code and documentation are there, so you can learn using actual examples of code that will do what you need. There’s everything from a simple table query to a full project that is sort of a “Corporate Dropbox” that uses Windows Azure Storage. The advantage is that this code is immediately usable. It’s searchable, and you can often find a complete solution to meet your needs. The disadvantage is that the code is pretty specific – it may not cover a huge project like you’re looking for. Also, depending on the author(s), you might not find the documentation level you want. Link: http://azureexamples.codeplex.com/site/search?query=Azure&ac=8    Tailspin Microsoft Patterns and Practices is a group here that does an amazing job at sharing standard ways of doing IT – from operations to coding. If you’re not familiar with this resource, make sure you read up on it. Long before I joined Microsoft I used their work in my daily job – saved a ton of time. It has resources not only for Windows Azure but other Microsoft software as well. The Patterns and Practices group also publishes full books – you can buy these, but many are also online for free. There’s an end-to-end example for Windows Azure using a company called “Tailspin”, and the work covers not only the code but the design of the full solution. If you really want to understand the thought that goes into a Platform-as-a-Service solution, this is an excellent resource. The advantages are that this is a book, it’s complete, and it includes a discussion of design decisions. The disadvantage is that it’s a little over a year old – and in “Cloud” years that’s a lot. So many things have changed, improved, and have been added that you need to treat this as a resource, but not the only one. Still, highly recommended. Link: http://msdn.microsoft.com/en-us/library/ff728592.aspx Azure Stock Trader Sometimes you need a mix of a CodePlex-style application, and a little more detail on how it was put together. And it would be great if you could actually play with the completed application, to see how it really functions on the actual platform. That’s the Azure Stock Trader application. There’s a place where you can read about the application, and then it’s been published to Windows Azure – the production platform – and you can use it, explore, and see how it performs. I use this application all the time to demonstrate Windows Azure, or a particular part of Windows Azure. The advantage is that this is an end-to-end application, and online as well. The disadvantage is that it takes a bit of self-learning to work through.  Links: Learn it: http://msdn.microsoft.com/en-us/netframework/bb499684 Use it: https://azurestocktrader.cloudapp.net/

  Read the article

• Passing the CAML thru the EY of the NEEDL

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Passing the CAML thru the EY of the NEEDL Definitions: CAML (Collaborative Application Markup Language) is an XML based markup language used in Microsoft SharePoint technologies  Anonymous: A camel is a horse designed by committee  Dov Trietsch: A CAML is a HORS designed by Microsoft  I was advised against putting any Camel and Sphinx rhymes in here. Look it up in Google!  _____ Now that we have dispensed with the dromedary jokes (BTW, I have many more, but they are not fit to print!), here is an interesting problem and its solution.  We have built a list where the title must be kept unique so I needed to verify the existence (or absence) of a list item with a particular title. Two methods came to mind:  1: Span the list until the title is found (result = found) or until the list ends (result = not found). This is an algorithm of complexity O(N) and for long lists it is a performance sucker. 2: Use a CAML query instead. Here, for short list we’ll encounter some overhead, but because the query results in an SQL query on the content database, it is of complexity O(LogN), which is significantly better and scales perfectly. Obviously I decided to go with the latter and this is where the CAML s--t hit the fan.   A CAML query returns a SPListItemCollection and I simply checked its Count. If it was 0, the item did not already exist and it was safe to add a new item with the given title. Otherwise I cancelled the operation and warned the user. The trouble was that I always got a positive. Most of the time a false positive. The count was greater than 0 regardles of the title I checked (except when the list was empty, which happens only once). This was very disturbing indeed. To solve my immediate problem which was speedy delivery, I reverted to the “Span the list” approach, but the problem bugged me, so I wrote a little console app by which I tested and tweaked and tested, time and again, until I found the solution. Yes, one can pass the proverbial CAML thru the ey of the needle (e’s missing on purpose).  So here are my conclusions:  CAML that does not work:  Note: QT is my quote:  char QT = Convert.ToChar((int)34); string titleQuery = "<Query>><Where><Eq>"; titleQuery += "<FieldRef Name=" + QT + "Title" + QT + "/>"; titleQuery += "<Value Type=" + QT + "Text" + QT + ">" + uniqueID + "</Value></Eq></Where></Query>"; titleQuery += "<ViewFields><FieldRef Name=" + QT + "Title" + QT + "/></ViewFields>";  Why? Even though U2U generates it, the <Query> and </Query> tags do not belong in the query that you pass. Start your query with the <Where> clause.  Also the <ViewFiels> clause does not belong. I used this clause to limit the returned collection to a single column, and I still wish to do it. I’ll show how this is done a bit later.   When you use the <Query> </Query> tags in you query, it’s as if you did not specify the query at all. What you get is the all inclusive default query for the list. It returns evey column and every item. It is expensive for both server and network because it does all the extra processing and eats plenty of bandwidth.   Now, here is the CAML that works  string titleQuery = "<Where><Eq>"; titleQuery += "<FieldRef Name=" + QT + "Title" + QT + "/>"; titleQuery += "<Value Type=" + QT + "Text" + QT + ">" + uniqueID + "</Value></Eq></Where>";  You’ll also notice that inside the unusable <ViewFields> clause above, we have a <FieldRef> clause. This is what we pass to the SPQuery object. Here is how:  SPQuery query = new SPQuery(); query.Query = titleQuery; query.ViewFields = "<FieldRef Name=" + QT + "Title" + QT + "/>"; query.RowLimit = 1; SPListItemCollection col = masterList.GetItems(query);  Two thing to note: we enter the view fields into the SPQuery object and we also limited the number of rows that the query returns. The latter is not always done, but in an existence test, there is no point in returning hundreds of rows. The query will now return one item or none, which is all we need in order to verify the existence (or non-existence) of items. Limiting the number of columns and the number of rows is a great performance enhancer. That’s all folks!!

  Read the article

• 2012 Oracle Fusion Innovation Awards - Part 2

  - by Michelle Kimihira

  Author: Moazzam Chaudry Continuing from Friday's blog on 2012 Oracle Fusion Innovation Awards, this blog (Part 2) will provide more details around the customers. It was a tremendous honor to be in single room of winners. We only wish we could have had more time to share stories from all the winners.  We received great insight from all the innovative solutions that our customers deploy and would like to share them broadly, so that others can benefit from best practices. There was a customer panel session joined by Ingersoll Rand, Nike and Motability and here is what was discussed: Barry Bonar, Enterprise Architect from Ingersoll Rand shared details around their solution, comprised of Oracle Exalogic, Oracle WebLogic Server and Oracle SOA Suite. This combined solutoin enabled their business transformation to increase decision-making, speed and efficiency, resulting in 40% reduced IT spend, 41X Faster response time and huge cost savings. Ashok Balakrishnan, Architect from Nike shared how they leveraged Oracle Coherence to analyze their digital "footprint" of activities. This helps them compete, collaborate and compare athletic data over time. Lastly, Ashley Doodly, Head of IT from Motability shared details around their solution compromised of Oracle SOA Suite, Service Bus, ADF, Coherence, BO and E-Business Suite. This solution helped Motability achieve 100% ROI within the first few months, performance in seconds vs. 10's of minutes and tremendous improvement in throughput that increased up to 50%.  This year's winners by category are: Oracle Exalogic Customer Results using Fusion Middleware Netshoes ATG on Exalogic: 6X Reduced H/W foot print, 6.2X increased throughput and 3 weeks time to market Claro Part of America Movil, running mission critical Java Application on Exalogic with 35X Faster Java response time, 5X Throughput Underwriters Laboratories Exalogic as an Apps Consolidation platform to power tremendous growth Ingersoll Rand EBS on Exalogic: Up to 40% Reduction in overall IT budget, 3x reduced foot print Oracle Cloud Application Foundation Customer Results using Fusion Middleware  Mazda Motor Corporation Tuxedo ART Batch runtime environment to migrate their batch apps on new open environment and reduce main frame cost. HOTELBEDS Technology Open Source to WebLogic transformation Globalia Corporation Introduced Oracle Coherence to fully reengineer DTH system and provide multiple business and technical benefits Nike Nike+, digital sports platform, has 8M users and is expecting an 5X increase in users, many of who will carry multiple devices that frequently sync data with the Digital Sport platform Comcast Corporation The solution is expected to increase availability, continuity, performance, and simplify and make the code at the application layer more flexible. Oracle SOA and Oracle BPM Customer Results using Fusion Middleware NTT Docomo Network traffic solution based on Oracle event processing and coherence - massive in scale: 12M users (50M in future) - 800,000 events/sec. Schneider National, Inc. SOA/B2B/ADF/Data Integration to orchestrate key order processes across Siebel, OTM & EBS.  Platform runs 60M trans/day and  50 million composite SOA instances per day across 10G and 11G Amadeus Oracle BPM solution: Business Rules and processes vary across local (80), regional (~10) and corporate approval process. Up to 10 levels of approval. Plans to deploy across 20+ markets Navitar SOA solution integrates a fully non-Oracle legacy application/ERP environment using Oracle’s SOA Suite and Oracle AIA Foundation Pack. Motability Uses SOA Suite to synchronize data across the systems and to manage the vehicle remarketing process Oracle WebCenter Customer Results using Fusion Middleware  News Limited Single platform running websites for 50% of Australia's newspapers University of Louisville “Facebook for Medicine”: Oracle Webcenter platform and Oracle BIEE to analyze patient test data and uncover potential health issues. Expecting annualized ROI of 277% China Mobile Jiangsu Company portal (25k users) to drive collaboration & productivity Life Technologies Portal for remotely monitoring & repairing biotech instruments LA Dept. of Water & Power Oracle WebCenter Portal to power ladwp.com on desktop and mobile for 1.6million users Oracle Identity Management Customer Results using Fusion Middleware Education Testing Service Identity Management platform for provisioning & SSO of 6 million GRE, GMAT, TOEFL customers Avea Oracle Identity Manager allowing call center personnel to quickly change Identity Profile to handle varying call loads based on a user self service interface. Decreased Admin Cost by 30% Oracle Data Integration Customer Results using Fusion Middleware Raymond James Near real-time integration for improved systems (throughput & performance) and enhanced operational flexibility in a 24 X 7 environment Wm Morrison Supermarkets Electronic Point of Sale integration handling over 80 million transactions a day in near real time (15 min intervals) Oracle Application Development Framework and Oracle Fusion Development Customer Results using Fusion Middleware Qualcomm Incorporated Solution providing  immediate business value enabling a self-service model necessary for growing the new customer base, an increase in customer satisfaction, reduced “time-to-deliver” Micros Systems, Inc. ADF, SOA Suite, WebCenter  enables services that include managing distribution of hotel rooms availability and rates to channels such as Hotel Web-site, Expedia, etc. Marfin Egnatia Bank A new web 2.0 UI provides a much richer experience through the ADF solution with the end result being one of boosting end-user productivity    Business Analytics (Oracle BI, Oracle EPM, Oracle Exalytics) Customer Results using Fusion Middleware INC Research Self-service customer portal delivering 5–10% of the overall revenue - expected to grow fast with the BI solution Experian Reduction in Time to Complete the Financial Close Process Hologic Inc Solution, saving months of decision-making uncertainty! We look forward to seeing many more innovative nominations. The nominatation process for 2013 begins in April 2013.    Additional Information: Blog: Oracle WebCenter Award Winners Blog: Oracle Identity Management Winners Blog: Oracle Exalogic Winners Blog: SOA, BPM and Data Integration will be will feature award winners in its respective areas this week Subscribe to our regular Fusion Middleware Newsletter Follow us on Twitter and Facebook

  Read the article

• Replication - between pools in the same system

  - by Steve Tunstall

  OK, I fully understand that's it's been a LONG time since I've blogged with any tips or tricks on the ZFSSA, and I'm way behind. Hey, I just wrote TWO BLOGS ON THE SAME DAY!!! Make sure you keep scrolling down to see the next one too, or you may have missed it. To celebrate, for the one or two of you out there who are still reading this, I got something for you. The first TWO people who make any comment below, with your real name and email so I can contact you, will get some cool Oracle SWAG that I have to give away. Don't get excited, it's not an iPad, but it pretty good stuff. Only the first two, so if you already see two below, then settle down. Now, let's talk about Replication and Migration.  I have talked before about Shadow Migration here: https://blogs.oracle.com/7000tips/entry/shadow_migrationShadow Migration lets one take a NFS or CIFS share in one pool on a system and migrate that data over to another pool in the same system. That's handy, but right now it's only for file systems like NFS and CIFS. It will not work for LUNs. LUN shadow migration is a roadmap item, however. So.... What if you have a ZFSSA cluster with multiple pools, and you have a LUN in one pool but later you decide it's best if it was in the other pool? No problem. Replication to the rescue. What's that? Replication is only for replicating data between two different systems? Who told you that? We've been able to replicate to the same system now for a few code updates back. These instructions below will also work just fine if you're setting up replication between two different systems. After replication is complete, you can easily break replication, change the new LUN into a primary LUN and then delete the source LUN. Bam. Step 1- setup a target system. In our case, the target system is ourself, but you still have to set it up like it's far away. Go to Configuration-->Services-->Remote Replication. Click the plus sign and setup the target, which is the ZFSSA you're on now. Step 2. Now you can go to the LUN you want to replicate. Take note which Pool and Project you're in. In my case, I have a LUN in Pool2 called LUNp2 that I wish to replicate to Pool1.  Step 3. In my case, I made a Project called "Luns" and it has LUNp2 inside of it. I am going to replicate the Project, which will automatically replicate all of the LUNs and/or Filesystems inside of it.  Now, you can also replicate from the Share level instead of the Project. That will only replicate the share, and not all the other shares of a project. If someone tells you that if you replicate a share, it always replicates all the other shares also in that Project, don't listen to them.Note below how I can choose not only the Target (which is myself), but I can also choose which Pool to replicate it to. So I choose Pool1.  Step 4. I did not choose a schedule or pick the "Continuous" button, which means my replication will be manual only. I can now push the Manual Replicate button on my Actions list and you will see it start. You will see both a barber pole animation and also an update in the status bar on the top of the screen that a replication event has begun. This also goes into the event log.  Step 5. The status bar will also log an event when it's done. Step 6. If you go back to Configuration-->Services-->Remote Replication, you will see your event. Step 7. Done. To see your new replica, go to the other Pool (Pool1 for me), and click the "Replica" area below the words "Filesystems | LUNs" Here, you will see any replicas that have come in from any of your sources. It's a simple matter from here to break the replication, which will change this to a "Local" LUN, and then delete the original LUN back in Pool2. Ok, that's all for now, but I promise to give out more tricks sometime in November !!! There's very exciting stuff coming down the pipe for the ZFSSA. Both new hardware and new software features that I'm just drooling over. That's all I can say, but contact your local sales SC to get a NDA roadmap talk if you want to hear more.   Happy Halloween,Steve 

  Read the article

• User is trying to leave! Set at-least confirm alert on browser(tab) close event!!

  - by kaushalparik27

  This is something that might be annoying or irritating for end user. Obviously, It's impossible to prevent end user from closing the/any browser. Just think of this if it becomes possible!!!. That will be a horrible web world where everytime you will be attacked by sites and they will not allow to close your browser until you confirm your shopping cart and do the payment. LOL:) You need to open the task manager and might have to kill the running browser exe processes.Anyways; Jokes apart, but I have one situation where I need to alert/confirm from the user in any anyway when they try to close the browser or change the url. Think of this: You are creating a single page intranet asp.net application where your employee can enter/select their TDS/Investment Declarations and you wish to at-least ALERT/CONFIRM them if they are attempting to:[1] Close the Browser[2] Close the Browser Tab[3] Attempt to go some other site by Changing the urlwithout completing/freezing their declaration.So, Finally requirement is clear. I need to alert/confirm the user what he is going to do on above bulleted events. I am going to use window.onbeforeunload event to set the javascript confirm alert box to appear.    <script language="JavaScript" type="text/javascript">        window.onbeforeunload = confirmExit;        function confirmExit() {            return "You are about to exit the system before freezing your declaration! If you leave now and never return to freeze your declaration; then they will not go into effect and you may lose tax deduction, Are you sure you want to leave now?";        }    </script>See! you are halfway done!. So, every time browser unloads the page, above confirm alert causes to appear on front of user like below:By saying here "every time browser unloads the page"; I mean to say that whenever page loads or postback happens the browser onbeforeunload event will be executed. So, event a button submit or a link submit which causes page to postback would tend to execute the browser onbeforeunload event to fire!So, now the hurdle is how can we prevent the alert "Not to show when page is being postback" via any button/link submit? Answer is JQuery :)Idea is, you just need to set the script reference src to jQuery library and Set the window.onbeforeunload event to null when any input/link causes a page to postback.Below will be the complete code:<head runat="server">    <title></title>    <script src="jquery.min.js" type="text/javascript"></script>    <script language="JavaScript" type="text/javascript">        window.onbeforeunload = confirmExit;        function confirmExit() {            return "You are about to exit the system before freezing your declaration! If you leave now and never return to freeze your declaration; then they will not go into effect and you may lose tax deduction, Are you sure you want to leave now?";        }        $(function() {            $("a").click(function() {                window.onbeforeunload = null;            });            $("input").click(function() {                window.onbeforeunload = null;            });        });    </script></head><body>    <form id="form1" runat="server">    <div></div>    </form></body></html>So, By this post I have tried to set the confirm alert if user try to close the browser/tab or try leave the site by changing the url. I have attached a working example with this post here. I hope someone might find it helpful.

  Read the article

• MVVM Light V4 preview 2 (BL0015) #mvvmlight

  - by Laurent Bugnion

  Over the past few weeks, I have worked hard on a few new features for MVVM Light V4. Here is a second early preview (consider this pre-alpha if you wish). The features are unit-tested, but I am now looking for feedback and there might be bugs! Bug correction: Messenger.CleanupList is now thread safe This was an annoying bug that is now corrected: In some circumstances, an exception could be thrown when the Messenger’s recipients list was cleaned up (i.e. the “dead” instances were removed). The method is called now and then and the exception was thrown apparently at random. In fact it was really a multi-threading issue, which is now corrected. Bug correction: AllowPartiallyTrustedCallers prevents EventToCommand to work This is a particularly annoying regression bug that was introduced in BL0014. In order to allow MVVM Light to work in XBAPs too, I added the AllowPartiallyTrustedCallers attribute to the assemblies. However, we just found out that this causes issues when using EventToCommand. In order to allow EventToCommand to continue working, I reverted to the previous state by removing the AllowPartiallyTrustedCallers attribute for now. I will work with my friends at Microsoft to try and find a solution. Stay tuned. Bug correction: XML documentation file is now generated in Release configuration The XML documentation file was not generated for the Release configuration. This was a simple flag in the project file that I had forgotten to set. This is corrected now. Applying EventToCommand to non-FrameworkElements This feature has been requested in order to be able to execute a command when a Storyboard is completed. I implemented this, but unfortunately found out that EventToCommand can only be added to Storyboards in Silverlight 3 and Silverlight 4, but not in WPF or in Windows Phone 7. This obviously limits the usefulness of this change, but I decided to publish it anyway, because it is pretty damn useful in Silverlight… Why not in WPF? In WPF, Storyboards added to a resource dictionary are frozen. This is a feature of WPF which allows to optimize certain objects for performance: By freezing them, it is a contract where we say “this object will not be modified anymore, so do your perf optimization on them without worrying too much”. Unfortunately, adding a Trigger (such as EventTrigger) to an object in resources does not work if this object is frozen… and unfortunately, there is no way to tell WPF not to freeze the Storyboard in the resources… so there is no way around that (at least none I can see. In Silverlight, objects are not frozen, so an EventTrigger can be added without problems. Why not in WP7? In Windows Phone 7, there is a totally different issue: Adding a Trigger can only be done to a FrameworkElement, which Storyboard is not. Here I think that we might see a change in a future version of the framework, so maybe this small trick will work in the future. Workaround? Since you cannot use the EventToCommand on a Storyboard in WPF and in WP7, the workaround is pretty obvious: Handle the Completed event in the code behind, and call the Command from there on the ViewModel. This object can be obtained by casting the DataContext to the ViewModel type. This means that the View needs to know about the ViewModel, but I never had issues with that anyway. New class: NotifyPropertyChanged Sometimes when you implement a model object (for example Customer), you would like to have it implement INotifyPropertyChanged, but without having all the frills of a ViewModelBase. A new class named NotifyPropertyChanged allows you to do that. This class is a simple implementation of INotifyPropertyChaned (with all the overloads of RaisePropertyChanged that were implemented in BL0014). In fact, ViewModelBase inherits NotifyPropertyChanged. ViewModelBase does not implement IDisposable anymore The IDisposable interface and the Dispose method had been marked obsolete in the ViewModelBase class already in V3. Now they have been removed. Note: By this, I do not mean that IDisposable is a bad interface, or that it shouldn’t be used on viewmodels. In the contrary, I know that this interface is very useful in certain circumstances. However, I think that having it by default on every instance of ViewModelBase was sending a wrong message. This interface has a strong meaning in .NET: After Dispose has been executed, the instance should not be used anymore, and should be ready for garbage collection. What I really wanted to have on ViewModelBase was rather a simple cleanup method, something that can be executed now and then during runtime. This is fulfilled by the ICleanup interface and its Cleanup method. If your ViewModels need IDisposable, you can still use it! You will just have to implement the interface on the class itself, because it is not available on ViewModelBase anymore. What’s next? I have a couple exciting new features implemented already but that need more testing before they go live… Just stay tuned and by MIX11 (12-14 April 2011), we should see at least a major addition to MVVM Light Toolkit, as well as another smaller feature which is pretty cool nonetheless More about this later! Happy Coding Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• SQL Server devs–what source control system do you use, if any? (answer and maybe win free stuff)

  - by jamiet

  Recently I noticed a tweet from notable SQL Server author and community dude-at-large Steve Jones in which he asked how many SQL Server developers were putting their SQL Server source code (i.e. DDL) under source control (I’m paraphrasing because I can’t remember the exact tweet and Twitter’s search functionality is useless). The question surprised me slightly as I thought a more pertinent question would be “how many SQL Server developers are not using source control?” because I have been doing just that for many years now and I simply assumed that use of source control is a given in this day and age. Then I started thinking about it. “Perhaps I’m wrong” I pondered, “perhaps the SQL Server folks that do use source control in their day-to-day jobs are in the minority”. So, dear reader, I’m interested to know a little bit more about your use of source control. Are you putting your SQL Server code into a source control system? If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? Why did you make those particular software choices? Any interesting anecdotes to share in regard to your use of source control and SQL Server? To encourage you to contribute I have five pairs of licenses for Red Gate SQL Source Control and Red Gate SQL Connect to give away to what I consider to be the five best replies (“best” is totally subjective of course but this is my blog so my decision is final ), if you want to be considered don’t forget to leave contact details; email address, Twitter handle or similar will do. To start you off and to perhaps get the brain cells whirring, here are my answers to the questions above: Are you putting your SQL Server code into a source control system? As I think I’ve already said…yes. Always. If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? I move around a lot between many clients so it changes on a fairly regular basis; my current client uses Team Foundation Server (aka TFS) and as part of a separate project is trialing the use of Team Foundation Service. I have used SVN extensively in the past which I am a fan of (I generally prefer it to TFS) and am trying to get my head around Git by using it for ObjectStorageHelper. What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? On my current project, Team Explorer. In the past I have used Tortoise to connect to SVN. Why did you make those particular software choices? I generally use whatever the client uses and given that I work with SQL Server I find that the majority of my clients use TFS, I guess simply because they are Microsoft development shops. Any interesting anecdotes to share in regard to your use of source control and SQL Server? Not an anecdote as such but I am going to share some frustrations about TFS. In many ways TFS is a great product because it integrates many separate functions (source control, work item tracking, build agents) into one whole and I’m firmly of the opinion that that is a good thing if for no reason other than being able to associate your check-ins with a work-item. However, like many people there are aspects to TFS source control that annoy me day-in, day-out. Chief among them has to be the fact that it uses a file’s read-only property to determine if a file should be checked-out or not and, if it determines that it should, it will happily do that check-out on your behalf without you even asking it to. I didn’t realise how ridiculous this was until I first used SVN about three years ago – with SVN you make any changes you wish and then use your source control client to determine which files have changed and thus be checked-in; the notion of “check-out” doesn’t even exist. That sounds like a small thing but you don’t realise how liberating it is until you actually start working that way. Hoping to hear some more anecdotes and opinions in the comments. Remember….free software is up for grabs! @jamiet 

  Read the article

• SQL SERVER – TechEd India 2012 – Content, Speakers and a Lots of Fun

  - by pinaldave

  TechEd is one event which every developers and IT professionals are looking forward to attend. It is opportunity of life time and no matter how many time one gets chance to engage with it, it is never enough. I still remember every single moment of every TechEd I have attended so far. We are less than 100 hours away from TechEd India 2012 event.This event is the one must attend event for every Technology Enthusiast. Fourth time in the row I am going to attend this event and I am equally excited as the first time of the event. There are going to be two very solid SQL Server track this time and I will be attending end of the end both the tracks. Here is my view on each of the 10 sessions. Each session is carefully crafted and leading exeprts from industry will present it. Day 1, March 21, 2012 T-SQL Rediscovered with SQL Server 2012 – This session is going to bring some of the lesser known enhancements that were brought with SQL Server 2012. When I learned that Jacob Sebastian is going to do this session my reaction to this is DEMO, DEMO and DEMO! Jacob spends hours and hours of his time preparing his session and this will be one of those session that I am confident will be delivered over and over through out the next many events. Catapult your data with SQL Server 2012 Integration Services – Praveen is expert story teller and one of the wizard when it is about SQL Server and business intelligence. He is surely going to mesmerize you with some interesting insights on SSIS performance too. Processing Big Data with SQL Server 2012 and Hadoop – There are three sessions on Big Data at TechEd India 2012. Stephen is going to deliver one of the session. Watching Stephen present is always joy and quite entertaining. He shares knowledge with his typical humor which captures ones attention. I wrote about what is BIG DATA in a blog post. SQL Server Misconceptions and Resolutions – I will be presenting this Session along with Vinod Kumar. READ MORE HERE. Securing with ContainedDB in SQL Server 2012 – Pranab is expert when it is about SQL Server and Security. I have seen him presenting and he is indeed very pleasant to watch. A dry subject like security, he makes it much lively. A Contained Database is a database which contains all the necessary settings and metadata, making database easily portable to another server. This database will contain all the necessary details and will not have to depend on any server where it is installed for anything. You can take this database and move it to another server without having any worries. Day 3, March 23, 2012 Peeling SQL Server like an Onion: Internals Demystified – Vinod Kumar has been writing about this extensively on his other blog post. In recent conversation he suggested that he will be creating very exclusive content for this presentation. I know Vinod for long time and have worked with him along many community activities. I am going to pay special attention to the details. I know Vinod has few give-away planned now for attending the session now only if he shares with us. Speed Up – Parallel Processes and unparalleled Performance – Performance tuning is my favorite subject. I will be discussing effect of parallelism on performance in this session. Here me out, there will be lots of quiz questions during this session and if you get the answers correct – you can win some really cool goodies – I Promise! READ MORE HERE. Keep your database available – AlwaysOn – Balmukund is like an army man. He is always ready to show and prove that he has coolest toys in terms of SQL Server and he knows how to keep them running AlwaysON. Availability groups, Listener, Clustering, Failover, Read-Only replica etc all will be demo’ed in this session. This is really heavy but very interesting content not to be missed. Lesser known facts about SQL Server Backup and Restore – Amit Banerjee – this name is known internationally for solving SQL Server problems in 140 characters. He has already blogged about this and this topic is going to be interesting. A successful restore strategy for applications is as good as their last good known backup. I have few difficult questions to ask to Amit and I am very sure that his unique style will entertain people. By the way, his one of the slide may give few in audience a funny heart attack. Top 5 reasons why you want SQL Server 2012 BI – Praveen plans to take a tour of some of the BI enhancements introduced in the new version. Business Insights with SQL Server is a critical building block and this version of SQL Server is no exception. For the matter of the fact, when I saw the demos he was going to show during this session, I felt like that I wish I can set up all of this on my machine. If you miss this session – you will miss one of the most informative session of the day. Also TechEd India 2012 has a Live streaming of some content and this can be watched here. The TechEd Team is planning to have some really good exclusive content in this channel as well. If you spot me, just do not hesitate to come by me and introduce yourself, I want to remember you! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

  Read the article

• Windows Azure End to End Examples

  - by BuckWoody

  I’m fascinated by the way people learn. I’m told there are several methods people use to understand new information, from reading to watching, from experiencing to exploring. Personally, I use multiple methods of learning when I encounter a new topic, usually starting with reading a bit about the concepts. I quickly want to put those into practice, however, especially in the technical realm. I immediately look for examples where I can start trying out the concepts. But I often want a “real” example – not just something that represents the concept, but something that is real-world, showing some feature I could actually use. And it’s no different with the Windows Azure platform – I like finding things I can do now, and actually use. So when I started learning Windows Azure, I of course began with the Windows Azure Training Kit – which has lots of examples and labs, presentations and so on. But from there, I wanted more examples I could learn from, and eventually teach others with. I was asked if I would write a few of those up, so here are the ones I use. CodePlex CodePlex is Microsoft’s version of an “Open Source” repository. Anyone can start a project, add code, documentation and more to it and make it available to the world, free of charge, using various licenses as they wish. Microsoft also uses this location for most of the examples we publish, and sample databases for SQL Server. If you search in CodePlex for “Azure”, you’ll come back with a list of projects that folks have posted, including those of us at Microsoft. The source code and documentation are there, so you can learn using actual examples of code that will do what you need. There’s everything from a simple table query to a full project that is sort of a “Corporate Dropbox” that uses Windows Azure Storage. The advantage is that this code is immediately usable. It’s searchable, and you can often find a complete solution to meet your needs. The disadvantage is that the code is pretty specific – it may not cover a huge project like you’re looking for. Also, depending on the author(s), you might not find the documentation level you want. Link: http://azureexamples.codeplex.com/site/search?query=Azure&ac=8    Tailspin Microsoft Patterns and Practices is a group here that does an amazing job at sharing standard ways of doing IT – from operations to coding. If you’re not familiar with this resource, make sure you read up on it. Long before I joined Microsoft I used their work in my daily job – saved a ton of time. It has resources not only for Windows Azure but other Microsoft software as well. The Patterns and Practices group also publishes full books – you can buy these, but many are also online for free. There’s an end-to-end example for Windows Azure using a company called “Tailspin”, and the work covers not only the code but the design of the full solution. If you really want to understand the thought that goes into a Platform-as-a-Service solution, this is an excellent resource. The advantages are that this is a book, it’s complete, and it includes a discussion of design decisions. The disadvantage is that it’s a little over a year old – and in “Cloud” years that’s a lot. So many things have changed, improved, and have been added that you need to treat this as a resource, but not the only one. Still, highly recommended. Link: http://msdn.microsoft.com/en-us/library/ff728592.aspx Azure Stock Trader Sometimes you need a mix of a CodePlex-style application, and a little more detail on how it was put together. And it would be great if you could actually play with the completed application, to see how it really functions on the actual platform. That’s the Azure Stock Trader application. There’s a place where you can read about the application, and then it’s been published to Windows Azure – the production platform – and you can use it, explore, and see how it performs. I use this application all the time to demonstrate Windows Azure, or a particular part of Windows Azure. The advantage is that this is an end-to-end application, and online as well. The disadvantage is that it takes a bit of self-learning to work through.  Links: Learn it: http://msdn.microsoft.com/en-us/netframework/bb499684 Use it: https://azurestocktrader.cloudapp.net/

  Read the article

• Bring Office 2003 Menus Back to 2010 with UBitMenu

  - by Matthew Guay

  Are you having trouble getting used to the Ribbon interface in Office 2010?  Here’s how you can roll back the clock a bit and bring back the familiar menus and toolbars from 2003. The Office 2007 Ribbon was both praised and criticized.  While many users felt they were more productive with the new interface, others felt frustrated searching for commands they had memorized in older versions of Office.  Now, with Office 2010, the ribbon interface has been brought to every app in the Office suite, and is integrated into many newer programs from Microsoft. If you’re moving from Office 2003, using UBitMenu allows you to add the old familiar menus back along with the new Ribbon interface for an easier learning curve. Also, with the customizability of Office 2010, we can strip away the extra Ribbon tabs to make it more like 2003. Get the 2003 Menus and Toolbars Back in Office 2010 Download UBitMenu (link below), and install as normal.  Make sure all of your Office programs are closed during the installation.  This handy utility is very small, and installed amazingly quick. Open Word, Excel, or PowerPoint and there’s now a new Menu tab beside Home in the Ribbon.  Now you can access all of your favorite old Office commands in the familiar menus, and access many of the newer Office features such as SmartArt.   Here’s a close-up of the toolbar.  Notice that the layout is very similar to that of Word 2003. You can access all of the new Transitions in PowerPoint 2010 from the menu bar.   The menu in Excel even included support for the new PivotTable and PivotCharts Wizard. One problem we noticed was that the toolbars were condensed to a drop-down menu if the Office window was less than 870px wide.  This may be a frustration to users with low-resolution displays, and you might want to use the Office Apps maximized. Get Rid of the Ribbon Now that you’ve got the old menus back, you can get rid of the extra ribbon tabs if you’d like.  Office 2010 lets you customize your ribbon and remove tabs, so let’s get rid of all the other tabs except for our new Menu tab.  In our example we’re using Word, but you can do it in Excel or PowerPoint the same way. Click the File tab and select Options. Alternately, in the Menu tab, select Tools and then Word Options. Select Customize Ribbon on the left sidebar, then uncheck the boxes beside all the ribbon tabs you want to hide on the right.  Click Ok when you’re finished. While you’re at it, you can change the default color scheme as well. Note: The color change will automatically change the color scheme in all of the Office apps, so you’ll only need to do that once. Now the ribbon only has 2 tabs…the File tab for the new Backstage View, and the UBitMenu tab we just installed.  It almost has the appearance Word 2003, but with the new features of Word 2010!  You’ll need to repeat these steps in Excel and PowerPoint if you want to customize their ribbon the same.   Conclusion If you’ve been having a hard time getting used to Office 2010, UBitMenu is a great way to get familiar with the new interface, or simply stay productive with your old tricks.  We do wish it supported the other Office applications like OneNote and Outlook. That doesn’t make it a deal breaker though, it can make the learning curve easier in Word, PowerPoint, and Excel. UBitMenu is free for personal use, and available at a very reasonable price for businesses. If you’re using Office 2007 and not a fan of the Ribbon, UBitMenu works for it as well. Download UBitMenu Similar Articles Productive Geek Tips How To Bring Back the Old Menus in Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideHow to Find Office 2003 Commands in Office 2010Make Word 2007 Always Save in Word 2003 FormatMake Excel 2007 Always Save in Excel 2003 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets

  Read the article

• T-SQL Tuesday #21 - Crap!

  - by Most Valuable Yak (Rob Volk)

  Adam Machanic's (blog | twitter) ever popular T-SQL Tuesday series is being held on Wednesday this time, and the topic is… SHIT CRAP. No, not fecal material.  But crap code.  Crap SQL.  Crap ideas that you thought were good at the time, or were forced to do due (doo-doo?) to lack of time. The challenge for me is to look back on my SQL Server career and find something that WASN'T crap.  Well, there's a lot that wasn't, but for some reason I don't remember those that well.  So the additional challenge is to pick one particular turd that I really wish I hadn't squeezed out.  Let's see if this outline fits the bill: An ETL process on text files; That had to interface between SQL Server and an AS/400 system; That didn't use SSIS (should have) or BizTalk (ummm, no) but command-line scripting, using Unix utilities(!) via: xp_cmdshell; That had to email reports and financial data, some of it sensitive Yep, the stench smell is coming back to me now, as if it was yesterday… As to why SSIS and BizTalk were not options, basically I didn't know either of them well enough to get the job done (and I still don't).  I also had a strict deadline of 3 days, in addition to all the other responsibilities I had, so no time to learn them.  And seeing how screwed up the rest of the process was: Payment files from multiple vendors in multiple formats; Sent via FTP, PGP encrypted email, or some other wizardry; Manually opened/downloaded and saved to a particular set of folders (couldn't change this); Once processed, had to be placed BACK in the same folders with the original archived; x2 divisions that had to run separately; Plus an additional vendor file in another format on a completely different schedule; So that they could be MANUALLY uploaded into the AS/400 system (couldn't change this either, even if it was technically possible) I didn't feel so bad about the solution I came up with, which was naturally: Copy the payment files to the local SQL Server drives, using xp_cmdshell Run batch files (via xp_cmdshell) to parse the different formats using sed, a Unix utility (this was before Powershell) Use other Unix utilities (join, split, grep, wc) to process parsed files and generate metadata (size, date, checksum, line count) Run sqlcmd to execute a stored procedure that passed the parsed file names so it would bulk load the data to do a comparison bcp the compared data out to ANOTHER text file so that I could grep that data out of the original file Run another stored procedure to import the matched data into SQL Server so it could process the payments, including file metadata Process payment batches and log which division and vendor they belong to Email the payment details to the finance group (since it was too hard for them to run a web report with the same data…which they ran anyway to compare the emailed file against…which always matched, surprisingly) Email another report showing unmatched payments so they could manually void them…about 3 months afterward All in "Excel" format, using xp_sendmail (SQL 2000 system) Copy the unmatched data back to the original folder locations, making sure to match the file format exactly (if you've ever worked with ACH files, you'll understand why this sucked) If you're one of the 10 people who have read my blog before, you know that I love the DOS "for" command.  Like passionately.  Like fairy-tale love.  So my batch files were riddled with for loops, nested within other for loops, that called other batch files containing for loops.  I think there was one section that had 4 or 5 nested for commands.  It was wrong, disturbed, and completely un-maintainable by anyone, even myself.  Months, even a year, after I left the company I got calls from someone who had to make a minor change to it, and they called me to talk them out of spraying the office with an AK-47 after looking at this code.  (for you Star Trek TOS fans) The funniest part of this, well, one of the funniest, is that I made the deadline…sort of, I was only a day late…and the DAMN THING WORKED practically unchanged for 3 years.  Most of the problems came from the manual parts of the overall process, like forgetting to decrypt the files, or missing/late files, or saved to the wrong folders.  I'm definitely not trying to toot my own horn here, because this was truly one of the dumbest, crappiest solutions I ever came up with.  Fortunately as far as I know it's no longer in use and someone has written a proper replacement.  Today I would knuckle down and do it in SSIS or Powershell, even if it took me weeks to get it right. The real lesson from this crap code is to make things MAINTAINABLE and UNDERSTANDABLE.  sed scripting regular expressions doesn't fit that criteria in any way.  If you ever find yourself under pressure to do something fast at all costs, DON'T DO IT.  Stop and consider long-term maintainability, not just for yourself but for others on your team.  If you can't explain the basic approach in under 5 minutes, it ultimately won't succeed.  And while you may love to leave all that crap behind, it may follow you anyway, and you'll step in it again.   P.S. - if you're wondering about all the manual stuff that couldn't be changed, it was because the entire process had gone through Six Sigma, and was deemed the best possible way.  Phew!  Talk about stink!

  Read the article

• How to UEFI install Ubuntu 12.10?

  - by Geezanansa

  Running a newer FM1 motherboard which is using an AMD 3870k APU with a new 1TB HDD. Following the advice in the motherboard manual and https://help.ubuntu.com/community/UEFI have now got to grub option screen for UEFI install. see http://imgur.com/VW5vz The dvd.iso being used is Ubuntu 12.10 desktop amd64 from ubuntu .com. The hdd has had a gpt partition table made for, by using gparted when in a live desktop session when booted in bios mode. (*edit/update: Although the old cd updates on running it is an old kernel and it did make a gpt but that version of gparted uses fdisk whereas gdisk is required to make gpt. Think am going to have to spend more time here http://www.dedoimedo.com/computers/gparted.html lol Using the gparted from 12.10 live session to make partitions; following the guidance regarding this at https://help.ubuntu.com/community/UEFI#Creating_an_EFI_partition, but can only boot to grub option screen http://imgur.com/VW5vz when 12.10 options to "try ubuntu" or "install ubuntu" are selected they give errors as described below*) but after making the gpt decided to leave it unformatted/unallocated space with the intention of using installer to set up partitions. update-originally but gparted now sees hdd as http://imgur.com/hFIvm as described above. *Booting live dvd in EFI mode gives "Secure Boot not installed" just before grub kernel option list with the option to "install ubuntu" but get "can not read cd/0" and "the kernel must be loaded first" errors; when that option is selected. Any pointers on how to get installer going for UEFI install would be good. Thanks in advance. update: Hopefully these screenshots can help better highlight where i am going wrong or if there is something else going on http://imgur.com/g30RB, http://imgur.com/VW5vz, http://imgur.com/31E0q, http://imgur.com/bnuaG, http://imgur.com/y4KGu, http://imgur.com/3u2QE, http://imgur.com/n9lN3, http://imgur.com/FEKvz, http://imgur.com/hFIvm, update: Thank you fernando garcia for pointing me in the right direction to start the process of elimantion. What i have done since asking question is a little home work starting here http://askubuntu.com/faq#bounty and here http://askubuntu.com/questions/how-to-ask. Looking at other similar questions was good fun and found this 12.10 UEFI Secure Boot install the most relative in helping getting ubuntu to uefi install on my system. In response to wolverine's question this article was referred to http://web.dodds.net/~vorlon/wiki/blog/SecureBoot_in_Ubuntu_12.10/ This article in the first sentence gives a link to http://www.ubuntu.com/download which is where i downloaded the 12.10 desktop amd64 .iso(and others) but have been unable to do a efi install of ubuntu on this system and as this is a new system have ended up just going with bios installer running which at least puts my mind at ease that i have not bricked my new mobo.(had to do a clrcmos and flash to latest bios version) So it possibly could be the bios settings or the bios version being used that is problem. To try and eliminate bios version i can not get to post screen in order to id bios version being used. Pressing tab to show post instead of logo and trying to pausebreak to catch post is proving difficult. If logo screen in bios is disabled just get black screen no post shown and pressing tab does not show post. Appreciate using appropriate bios settings and latest 12.10 release should simply get uefi installer running when selected from the grub list (nice graphic details in Identifying if computer boots the cd in efi mode section at https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_CD_in_EFI_mode) And to confirm the hdd is booting in efi mode https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_HDD_in_EFI_mode running the command [ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD" gave Legacy boot on HDD This is as expected because i allowed the bios installer (which was 12.04 desktop amd64 after trying 12.10 desktop amd64 in efi mode) to run to get a working installation. Which is not what was intended or wished for but wanted to get a working os to bench test new mobo i.e. prove it is working. There are other options as in installing other bootmanagers/loaders but do not wish to do so as shim should get grub2 going that is after secure boot has been signed.(Now got rough idea what should happen just it aint happening. Is it possible ahci drivers are required?) Will post boot info script url of the updated config/setup. The original question asked seems irrelevant to what is being said in this update but as the problem is not resolved will keep on trying efi installing! i.e the problem is same as when question asked just trying to update. Have tried to edit and update the best i can!

  Read the article

• Create Advanced Panoramas with Microsoft Image Composite Editor

  - by Matthew Guay

  Do you enjoy making panoramas with your pictures, but want more features than tools like Live Photo Gallery offer?  Here’s how you can create amazing panoramas for free with the Microsoft Image Composite Editor. Yesterday we took a look at creating panoramic photos in Windows Live Photo Gallery. Today we take a look at a free tool from Microsoft that will give you more advanced features to create your own masterpiece. Getting Started Download Microsoft Image Composite Editor from Microsoft Research (link below), and install as normal.  Note that there are separate version for 32 & 64-bit editions of Windows, so make sure to download the correct one for your computer. Once it’s installed, you can proceed to create awesome panoramas and extremely large image combinations with it.  Microsoft Image Composite Editor integrates with Live Photo Gallery, so you can create more advanced panoramic pictures directly.  Select the pictures you want to combine, click Extras in the menu bar, and select Create Image Composite. You can also create a photo stitch directly from Explorer.  Select the pictures you want to combine, right-click, and select Stitch Images… Or, simply launch the Image Composite Editor itself and drag your pictures into its editor.  Either way you start a image composition, the program will automatically analyze and combine your images.  This application is optimized for multiple cores, and we found it much faster than other panorama tools such as Live Photo Gallery. Within seconds, you’ll see your panorama in the top preview pane. From the bottom of the window, you can choose a different camera motion which will change how the program stitches the pictures together.  You can also quickly crop the picture to the size you want, or use Automatic Crop to have the program select the maximum area with a continuous picture.   Here’s how our panorama looked when we switched the Camera Motion to Planar Motion 2. But, the real tweaking comes in when you adjust the panorama’s projection and orientation.  Click the box button at the top to change these settings. The panorama is now overlaid with a grid, and you can drag the corners and edges of the panorama to change its shape. Or, from the Projection button at the top, you can choose different projection modes. Here we’ve chosen Cylinder (Vertical), which entirely removed the warp on the walls in the image.  You can pan around the image, and get the part you find most important in the center.  Click the Apply button on the top when you’re finished making changes, or click Revert if you want to switch to the default view settings. Once you’ve finished your masterpiece, you can export it easily to common photo formats from the Export panel on the bottom.  You can choose to scale the image or set it to a maximum width and height as well.  Click Export to disk to save the photo to your computer, or select Publish to Photosynth to post your panorama online. Alternately, from the File menu you can choose to save the panorama as .spj file.  This preserves all of your settings in the Image Composite Editor so you can edit it more in the future if you wish.   Conclusion Whether you’re trying to capture the inside of a building or a tall tree, the extra tools in Microsoft Image Composite Editor let you make nicer panoramas than you ever thought possible.  We found the final results surprisingly accurate to the real buildings and objects, especially after tweaking the projection modes.  This tool can be both fun and useful, so give it a try and let us know what you’ve found it useful for. Works with 32 & 64-bit versions of XP, Vista, and Windows 7 Link Download Microsoft Image Composite Editor Similar Articles Productive Geek Tips Change or Set the Greasemonkey Script Editor in FirefoxNew Vista Syntax for Opening Control Panel Items from the Command-lineTune Your ClearType Font Settings in Windows VistaChange the Default Editor From Nano on Ubuntu LinuxMake MSE Create a Restore Point Before Cleaning Malware TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor

  Read the article

• Using Hadooop (HDInsight) with Microsoft - Two (OK, Three) Options

  - by BuckWoody

  Microsoft has many tools for “Big Data”. In fact, you need many tools – there’s no product called “Big Data Solution” in a shrink-wrapped box – if you find one, you probably shouldn’t buy it. It’s tempting to want a single tool that handles everything in a problem domain, but with large, complex data, that isn’t a reality. You’ll mix and match several systems, open and closed source, to solve a given problem. But there are tools that help with handling data at large, complex scales. Normally the best way to do this is to break up the data into parts, and then put the calculation engines for that chunk of data right on the node where the data is stored. These systems are in a family called “Distributed File and Compute”. Microsoft has a couple of these, including the High Performance Computing edition of Windows Server. Recently we partnered with Hortonworks to bring the Apache Foundation’s release of Hadoop to Windows. And as it turns out, there are actually two (technically three) ways you can use it. (There’s a more detailed set of information here: http://www.microsoft.com/sqlserver/en/us/solutions-technologies/business-intelligence/big-data.aspx, I’ll cover the options at a general level below)  First Option: Windows Azure HDInsight Service  Your first option is that you can simply log on to a Hadoop control node and begin to run Pig or Hive statements against data that you have stored in Windows Azure. There’s nothing to set up (although you can configure things where needed), and you can send the commands, get the output of the job(s), and stop using the service when you are done – and repeat the process later if you wish. (There are also connectors to run jobs from Microsoft Excel, but that’s another post)   This option is useful when you have a periodic burst of work for a Hadoop workload, or the data collection has been happening into Windows Azure storage anyway. That might be from a web application, the logs from a web application, telemetrics (remote sensor input), and other modes of constant collection.   You can read more about this option here:  http://blogs.msdn.com/b/windowsazure/archive/2012/10/24/getting-started-with-windows-azure-hdinsight-service.aspx Second Option: Microsoft HDInsight Server Your second option is to use the Hadoop Distribution for on-premises Windows called Microsoft HDInsight Server. You set up the Name Node(s), Job Tracker(s), and Data Node(s), among other components, and you have control over the entire ecostructure.   This option is useful if you want to  have complete control over the system, leave it running all the time, or you have a huge quantity of data that you have to bulk-load constantly – something that isn’t going to be practical with a network transfer or disk-mailing scheme. You can read more about this option here: http://www.microsoft.com/sqlserver/en/us/solutions-technologies/business-intelligence/big-data.aspx Third Option (unsupported): Installation on Windows Azure Virtual Machines  Although unsupported, you could simply use a Windows Azure Virtual Machine (we support both Windows and Linux servers) and install Hadoop yourself – it’s open-source, so there’s nothing preventing you from doing that.   Aside from being unsupported, there are other issues you’ll run into with this approach – primarily involving performance and the amount of configuration you’ll need to do to access the data nodes properly. But for a single-node installation (where all components run on one system) such as learning, demos, training and the like, this isn’t a bad option. Did I mention that’s unsupported? :) You can learn more about Windows Azure Virtual Machines here: http://www.windowsazure.com/en-us/home/scenarios/virtual-machines/ And more about Hadoop and the installation/configuration (on Linux) here: http://en.wikipedia.org/wiki/Apache_Hadoop And more about the HDInsight installation here: http://www.microsoft.com/web/gallery/install.aspx?appid=HDINSIGHT-PREVIEW Choosing the right option Since you have two or three routes you can go, the best thing to do is evaluate the need you have, and place the workload where it makes the most sense.  My suggestion is to install the HDInsight Server locally on a test system, and play around with it. Read up on the best ways to use Hadoop for a given workload, understand the parts, write a little Pig and Hive, and get your feet wet. Then sign up for a test account on HDInsight Service, and see how that leverages what you know. If you're a true tinkerer, go ahead and try the VM route as well. Oh - there’s another great reference on the Windows Azure HDInsight that just came out, here: http://blogs.msdn.com/b/brunoterkaly/archive/2012/11/16/hadoop-on-azure-introduction.aspx  

  Read the article

• SQL SERVER – Beginning New Weekly Series – Memory Lane – #002

  - by pinaldave

  Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Query to Find ByteSize of All the Tables in Database This was my second blog post and today I do not remember what was the business need which has made me build this query. It was built for SQL Server 2000 and it will not directly run on SQL Server 2005 or later version now. It measured the byte size of the tables in the database. This can be done in many different ways as well for example SP_HELPDB as well SP_HELP. I wish to build similar script in 2005 and later version. 2007 This week I had completed my – 1 Year (365 blogs) and very first 1 Million Views. I was pretty excited at that time with this new achievement. SQL SERVER Versions, CodeNames, Year of Release When I started with SQL Server I did not know all the names correctly for each version and I often used to get confused with this. However, as time passed by I started to remember all the codename as well. In this blog post I have not included SQL Server 2012′s code name as it was not released at the time. SQL Server 2012′s code name is Denali. Here is the question for you – anyone know what is the internal name of the SQL Server’s next version? Searching String in Stored Procedure I have already started to work with 2005 by this time and I was personally converting each of my stored procedures to SQL Server 2005 compatible. As we were upgrading from SQL Server 2000 to SQL Server 2005 we had to search each of the stored procedures and make sure that we remove incompatible code from it. For example, syscolumns of SQL Server 2000 was now being replaced by sys.columns of SQL Server 2005. This stored procedure was pretty helpful at that time. Later on I build few additional versions of the same stored procedure. Version 1: This version finds the Stored Procedures related to Table Version 2: This is specific version which works with SQL Server 2005 and later version 2008 Clear Drop Down List of Recent Connection From SQL Server Management Studio It happens to all of us when we connected to some remote client server and we never ever have to connect to it again. However, it keeps on bothering us that the name shows up in the list all the time. In this blog post I covered a quick tip about how we can remove the same. I also wrote a small article about How to Check Database Integrity for all Databases and there was a funny question from a reader requesting T-SQL code to refresh databases. 2009 Stored Procedure are Compiled on First Run – SP is taking Longer to Run First Time A myth is quite prevailing in the industry that Stored Procedures are pre-compiled and they should always run faster. It is not true. Stored procedures are compiled on very first execution of it and that is the reason why it takes longer when it executes first time. In this blog post I had a great time discussing the same concept. If you do not agree with it, you are welcome to read this blog post. Removing Key Lookup – Seek Predicate – Predicate – An Interesting Observation Related to Datatypes Performance Tuning is an interesting concept and my personal favorite one. In many blog posts I have described how to do performance tuning and how to improve the performance of the queries. In this quick quick tip I have explained how one can remove the Key Lookup and improve performance. Here are very relevant articles on this subject: Article 1 | Article 2 | Article 3 2010 Recycle Error Log – Create New Log file without a Server Restart During one of the consulting assignments I noticed DBA restarting server to create new log file. This is absolutely not necessary and restarting server might have many other negative impacts. There is a common sp_cycle_errorlog which can do the same task efficiently and properly. Have you ever used this SP or feature? Additionally I had a great time presenting on SQL Server Best Practices in SharePoint Conference. 2011 SSMS 2012 Reset Keyboard Shortcuts to Default It is very much possible that we mix up various SQL Server shortcuts and at times we feel like resetting it to default. In SQL Server 2012 it is not easy to do it, there is a process to follow and I enjoyed blogging about it. Fundamentals of Columnstore Index Columnstore index is introduced in SQL Server 2012 and have been a very popular subject. It increases the speed of the server dramatically as well can be an extremely useful feature with Datawharehousing. However updating the columnstore index is not as simple as a simple UPDATE statement. Read in a detailed blog post about how Update works with Columnstore Index. Additionally, you can watch a Quick Video on this subject. SQL Server 2012 New Features I had decided to explore SQL Server 2012 features last year and went through pretty much every single concept introduced in separate blog posts. Here are two blog posts where I describe how SQL Server 2012 functions works. Introduction to CUME_DIST – Analytic Functions Introduction to FIRST _VALUE and LAST_VALUE – Analytic Functions OVER clause with FIRST_VALUE and LAST_VALUE – Analytic Functions I indeed enjoyed writing about SQL Server 2012 functions last year. Have you gone through all the new features which are introduced in SQL Server 2012? If not, it is still not late to go through them. Reference: Pinal Dave (http://blog.sqlauthority.com)   Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Modifying Service URLs with LINQ to Twitter

  - by Joe Mayo

  It’s funny that two posts so close together speak about flexibility with the LINQ to Twitter provider.  There are certain things you know from experience on when to make software more flexible and when to save time.  This is another one of those times when I got lucky and made the right choice up front. I’m talking about the ability to switch URLs. It only makes sense that Twitter should begin versioning their API as it matures.  In fact, most of the entire API has moved to the v1 URL at “https://api.twitter.com/1/”, except for search and trends.  Recently, Twitter introduced the available and local trends, but hung them off the new v1, and left the rest of the trends API on the old URL. To implement this, I muscled my way into the expression tree during CreateRequestProcessor to figure out which trend I was dealing with; perhaps not elegant, but the code is in the right place and that’s what factories are for.  Anyway, the point is that I wouldn’t have to do this kind of stuff (as much fun as it is), if Twitter would have more consistency. Having went to Chirp last week and seeing the evolution of the API, it looks like my wish is coming true.  …now if they would just get their stuff together on the mess they made with geo-location and places… but again, that’s all transparent if your using LINQ to Twitter because I pulled all of that together in a consistent way so that you don’t have to. Normally, when Twitter makes a change, code breaks and I have to scramble to get the fixes in-place.  This time, in the case of a URL change, the adjustment is easy and no-one has to wait for me.  Essentially, all you need to do is change the URL passed to the TwitterContext constructor.  Here’s an example of instantiating a TwitterContext now: using (var twitterCtx = new TwitterContext(auth, "https://api.twitter.com/1/", "https://search.twitter.com/")) The third parameter constructor is the SearchUrl, which is used for Search and Trend APIs. You probably know what’s coming next; another constructor, but with the SearchUrl parameter set to the new URL as follows: using (var twitterCtx = new TwitterContext(auth, "https://api.twitter.com/1/", "https://api.twitter.com/1/")) One consequence of setting the URL this way is that you set the URL for both Trends and Search.  Since Search is still using the old URL, this is going to break for Search queries. You could always instantiate a special TwitterContext instance for Search queries, with the old URL set. Alternatively, you can use the TwitterContext’s SearchUrl property. Here’s an example: twitterCtx.SearchUrl = "https://api.twitter.com/1/"; var trends = (from trend in twitterCtx.Trends where trend.Type == TrendType.Daily && trend.Date == DateTime.Now.AddDays(-2).Date select trend) .ToList(); Notice how I set the SearchUrl property just-in-time for the query. This allows you to target the URL for each specific query. Whichever way you prefer to configure the URL, it’s your choice. So, now you know how to set the URL to be used for Trend queries and how to prevent whacking your Search queries. I’ll be updating the Trend API to use same URL as all other APIs soon, so the only API left to use the SearchUrl will be Search, but for the short term, it’s Trends and Search. Until I make this change, you’ll have a viable work-around by setting the URL yourself, as explained above. These were the Search and Trend URLs, but you might be curious about the second parameter of the TwitterContext constructor; that’s the URL for all other APIs (the BaseUrl), except for Trend and Search. Similarly, you can use the TwitterContext’s BaseUrl property to set the BaseUrl. Setting the BaseUrl can be useful when communicating with other services. In addition to Twitter changing URLs, the Twitter API has been adopted by other companies, such as Identi.ca, Tumblr, and  WordPress.  This capability lets you use LINQ to Twitter with any of these services.  This is a testament to the success of the Twitter API and it’s popularity. No doubt we’ll have hills and valleys to traverse as the Twitter API matures, but hopefully there will be enough flexibility in LINQ to Twitter to make these changes as transparent as possible for you. @JoeMayo

  Read the article

• Introducing sp_ssiscatalog (v1.0.0.0)

  - by jamiet

  Regular readers of my blog may know that over the last year I have made available a suite of SQL Server Reporting Services (SSRS) reports that provide visualisations of the data in the SQL Server Integration Services (SSIS) 2012 Catalog. Those reports are available at http://ssisreportingpack.codeplex.com. As I have built these reports and used them myself on a real life project a couple of things have dawned on me: As soon as your SSIS Catalog gets a significant amount of data in it the performance of the reports degrades rapidly. This is hampered by the fact that there are limitations as to the SQL statements that I can embed within a SSRS report. SSIS professionals are data guys at heart and those types of people feel more comfortable in a query environment rather than having to go through the rigmarole of standing up a reporting server (well, I know I do anyway) Hence I have decided to take a different tack with the reporting pack. Taking my lead from Adam Machanic’s sp_whoisactive and Brent Ozar’s sp_blitz I have produced sp_ssiscatalog, a stored procedure that makes it easy to get at the crucial data in the SSIS Catalog. I will spend the rest of this blog explaining exactly what sp_ssiscatalog does and how to use it but if you would rather just download the bits yourself and start to play you can download v1.0.0.0 from DB v1.0.0.0. Usage Scenarios Most Recent Execution I find that the most frequent information that one needs to get from the SSIS Catalog is information pertaining to the most recent execution. Hence if you execute sp_ssiscatalog with no parameters, that is exactly what you will get. EXEC [dbo].[sp_ssiscatalog] This will return up to 5 resultsets: EXECUTION - Summary information about the execution including status, start time & end time EVENTS - All events that occurred during the execution OnError,OnTaskFailed - All events where event_name is either OnError or OnTaskFailed OnWarning - All events where event_name is OnWarning EXECUTABLE_STATS - Duration and execution result of every executable in the execution All 5 resultsets will be displayed if there is any data satisfying that resultset. In other words, if there are no (for example) OnWarning events then the OnWarning resultset will not be displayed. The display of these 5 resultsets can be toggled respectively by these 5 optional parameters (all of which are of type BIT): @exec_execution @exec_events @exec_errors @exec_warnings @exec_executable_stats Any Execution As just explained the default behaviour is to supply data for the most recent execution. If you wish to specify which execution the data should return data for simply supply the execution_id as a parameter: EXEC [dbo].[sp_ssiscatalog] 6 All Executions sp_ssiscatalog can also return information about all executions: EXEC [dbo].[sp_ssiscatalog] @operation_type='execs' The most recent execution will appear at the top. sp_ssiscatalog provides a number of parameters that enable you to filter the resultset: @execs_folder_name @execs_project_name @execs_package_name @execs_executed_as_name @execs_status_desc Some typical usages might be: //Return all failed executions EXEC [dbo].[sp_ssiscatalog] @operation_type='execs',@execs_status_desc='failed' //Return all executions for a specified folder EXEC [dbo].[sp_ssiscatalog] @operation_type='execs',@execs_folder_name='My folder' //Return all executions of a specified package in a specified project EXEC [dbo].[sp_ssiscatalog] @operation_type='execs',@execs_project_name='My project', @execs_package_name='Pkg.dtsx' Installing sp_ssicatalog Under the covers sp_ssiscatalog actually calls many other stored procedures and functions hence creating it on your server is not simply a case of running a CREATE PROCEDURE script. I maintain the code in an SQL Server Data Tools (SSDT) database project which means that you have two ways of obtaining it. Download the source code You can download the latest (at the time of writing) source code from http://ssisreportingpack.codeplex.com/SourceControl/changeset/view/70192. Hit the download button to download all the source code in a zip file. The contents of that zip file will include an SSDT database project which you can open up in SSDT and publish just like any other SSDT database project. You can publish to a new database or any existing database, even [SSISDB] if you prefer. Download a dacpac Maintaining the code in an SSDT database project means that it can all get packaged up into a dacpac that you can then publish to your SQL Server. That dacpac is available from DB v1.0.0.0: Ordinarily a dacpac can be deployed to a SQL Server from SSMS using the Deploy Dacpac wizard however in this case there is a limitation. Due to sp_ssiscatalog referring to objects in the SSIS Catalog (which it has to do of course) the dacpac contains a SqlCmd variable to store the name of the database that underpins the SSIS Catalog; unfortunately the Deploy Dacpac wizard in SSMS has a rather gaping limitation in that it cannot deploy dacpacs containing SqlCmd variables. Hence, we can use the command-line tool, sqlpackage.exe, instead. Don’t worry if reverting to the command-line sounds a little daunting, I assure you it is not. Simply open a Visual Studio command-prompt and cd to the folder containing the downloaded dacpac: Type: "%PROGRAMFILES(x86)%\Microsoft SQL Server\110\DAC\bin\sqlpackage.exe" /action:Publish /TargetDatabaseName:SsisReportingPack /SourceFile:SSISReportingPack.dacpac /Variables:SSISDB=SSISDB /TargetServerName:(local) or the shortened form: "%PROGRAMFILES(x86)%\Microsoft SQL Server\110\DAC\bin\sqlpackage.exe" /a:Publish /tdn:SsisReportingPack /sf:SSISReportingPack.dacpac /v:SSISDB=SSISDB /tsn:(local) remembering to set your server name appropriately (here mine is set to “(local)” ). If everything works successfully you will see this: And you’re done! You’ll have a new database called [SsisReportingPack] which contains sp_ssiscatalog:   Good luck with sp_ssiscatalog. I have been using it extensively on my own projects recently and it has proved to be very useful indeed. Rest-assured however, I will be adding many new capabilities in the future. Feedback is welcome. @Jamiet

  Read the article

• Beginner Guide to User Styles for Firefox

  - by Asian Angel

  While the default styles for most websites are nice there may be times when you would love to tweak how things look. See how easy it can be to change how websites look with the Stylish Extension for Firefox. Note: Scripts from Userstyles.org can also be added to Greasemonkey if you have it installed. Getting Started After installing the extension you will be presented with a first run page. You may want to keep it open so that you can browse directly to the Userstyles.org website using the link in the upper left corner. In the lower right corner you will have a new Status Bar Icon. If you have used Greasemonkey before this icon works a little differently. It will be faded out due to no user style scripts being active at the moment. You can use either a left or right click to access the Context Menu. The user style script management section is also added into your Add-ons Management Window instead of being separate. When you reach the user style scripts homepage you can choose to either learn more about the extension & scripts or… Start hunting for lots of user style script goodness. There will be three convenient categories to get you jump-started if you wish. You could also conduct a search if you have something specific in mind. Here is some information directly from the website provided for your benefit. Notice the reference to using these scripts with Greasemonkey… This section shows you how the scripts have been categorized and can give you a better idea of how to search for something more specific. Finding & Installing Scripts For our example we decided to look at the Updated Styles Section”first. Based on the page number listing at the bottom there are a lot of scripts available to look through. Time to refine our search a little bit… Using the drop-down menu we selected site styles and entered Yahoo in the search blank. Needless to say 5 pages was a lot easier to look through than 828. We decided to install the Yahoo! Result Number Script. When you do find a script (or scripts) that you like simply click on the Install with Stylish Button. A small window will pop up giving you the opportunity to preview, proceed with the installation, edit the code, or cancel the process. Note: In our example the Preview Function did not work but it may be something particular to the script or our browser’s settings. If you decide to do some quick editing the window shown above will switch over to this one. To return to the previous window and install the user style script click on the Switch to Install Button. After installing the user style the green section in the script’s webpage will actually change to this message… Opening up the Add-ons Manager Window shows our new script ready to go. The script worked perfectly when we conducted a search at Yahoo…the Status Bar Icon also changed from faded out to full color (another indicator that everything is running nicely). Conclusion If you prefer a custom look for your favorite websites then you can have a lot of fun experimenting with different user style scripts. Note: See our article here for specialized How-To Geek User Style Scripts that can be added to your browser. Links Download the Stylish Extension (Mozilla Add-ons) Visit the Userstyles.org Website Install the Yahoo! Result Number User Style Similar Articles Productive Geek Tips Spice Up that Boring about:blank Page in FirefoxExpand the Add Bookmark Dialog in Firefox by DefaultEnjoy How-To Geek User Style Script GoodnessAuto-Hide Your Cluttered Firefox Status Bar ItemsBeginner Geek: Delete User Accounts in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >