Search Results

Search found 6108 results on 245 pages for 'entry'.

Page 118/245 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• Word to GIMP pasted image too small

  - by Marcelo Cantos

  I paste an image from Microsoft Word 2010 into GIMP 2.6.10 using Edit ? Paste as ? New Image, but the pasted image is less than half-size (1280×800 down to 553×347). Pasting into an existing blank 1280×800 image makes no difference. On the other hand, pasting exactly the same clipboard entry into Windows Paint works beautifully, producing a razor-sharp 1280×800 image, and furthermore, pressing Ctrl+C in Paint, then going to Gimp and pressing Shift+Ctrl+V in Gimp produces the correct full-size image in Gimp too. Why does pasting an image directly from Word to Gimp reduce the image size? How can I make it paste the correct image size without having to go via Paint? UPDATE: I just noticed that cutting the image from Word and pasting back into the same document also loses definition. Paint must be magical.

  Read the article

• ssmtp for windows

  - by reox

  I have the following problem with a software that should do mail notification for a biometric entry system: the software does currently only support SMTP over port 25 without TLS/SSL. Which is bad because port 25 is blocked in our network due spam reason and our mailserver only support TLS / SSL logins. so i need a solution to connect to a localhost smtp server which just relays to my ssl host on port 587. i know there is ssmtp for linux, but i need it for windows, because the server app for this biometric stuff only runs on windows... edit: i know there is the IIS SMTP Server, but maybe something different?

  Read the article

• Windows XP/Firewall -- Can't open UDP port 9100 for JetDirect sharing

  - by Barton Chittenden

  I'm setting up my Dad's laptop (Vista) to print to an HP Deskjet printer attached to a Windows XP Desktop box. The XP box is running Windows firewall. Laptop sits on 192.168.1.66, Desktop 192.168.1.65. I set up logging in the firewall, and determined that it is dropping inbound packets on TCP port 9100, used by JetDirect, the printing protocol. I set up an exception on TCP port 9100, allowing access to the local subnet. There's also an entry under the 'allow applications' tab which was marked for the exact printer model. I selected this as well, then tried to print again... I see more dropped packets from 192.168.1.66 to 192.168.1.65 for TCP port 9100. What do I try next?

  Read the article

• PDF form created in Libre Office - trouble with form fields and font sizing

  - by soawesomejohn

  I am trying to create a PDF Form using LibreOffice. I can create the form elements and export as PDF. However, the form fields are giving me problems. The text in these fields always centers on the bottom, and often the text you input is cut off at the bottom. I found that if I make the fields larger, the text no longer cuts off, but the field is exceptionally large with lots of space above the text. I have made an odt (source) and a pdf (export) file to show what I'm running into. I tried a number of different fonts and sizes, but to make things easier, I made the field names all "field1" so that once you fill out one entry, all fields show as filled in. http://ytnoc.net/files/sampleapp.odt http://ytnoc.net/files/sampleapp.pdf My main question is how do I make form fields that don't cut off the text without having to make the fields way oversized? Made with LibreOffice 3.3.0

  Read the article

• VM clients can not access WAN

  - by Saariko

  I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

  Read the article

• In vim, prevent caret moving back when I leave edit mode?

  - by romkyns

  In vim, if I enter and leave edit mode without doing anything, the caret ends up one character to the left. And if I enter and leave append mode, the caret moves forwards and then backwards. Any way to configure vim to leave the caret alone in these cases? Ideally I just want to always enter append mode, but without moving the caret when I enter or exit the mode. (Currently I usually use insert mode because it doesn't mess up my caret position upon entry. That is, except when I need to append to the end of the line, in which case I swear at vim for behaving in such an archaic fashion, press Esc and enter append mode.)

  Read the article

• How to debug old initd script under systemd?

  - by Gene Vincent

  I have an older initd script to start my application. It worked fine under older versions of SuSE, but fails on Open SuSE 12.3. The strange thing is cd /etc/init.d ; ./script start works fine. /etc/init.d/script start shows a redirection to systemctl, but doesn't start my application (and also doesn't show any output from the initd script). I don't see any log entries showing me what goes wrong. The only entry I see is in /var/log/messages saying the application was started. How do I debug this ?

  Read the article

• Server downtime - are these APC warnings the cause?

  - by DisgruntledGoat

  Yesterday I had a problem with my dedicated server (Ubuntu 10.04, LAMP). It wasn't down per se, but running incredibly slowly as if we had a massive overload of visitors (though I don't think we did). It's running smoothly again now. I've been checking through log files etc to see if I can find any issues, the only strange thing is a bunch of these errors, occurring at about the same time as the downtime: [apc-warning] Unable to allocate memory for pool. in [file] on line 49. And a bit later on: [apc-warning] GC cache entry '[file1]' (dev=2056 ino=8988092) was on gc-list for 3601 seconds in [file2] on line 746. Could these errors indicate the cause of the server slowdown, or are they simply a result of the server being slow in the first place? What would be the solution?

  Read the article

• lighttpd not reliable

  - by schneck

  Hi there, I have a lighttpd running which serves a django-based webservice. It was running well for some months, but from today on, it returns a 410 sometimes, and sometimes fails silently. To test, I make a curl-call, which most time runs fine; it returns some json test-data. Some times. however, it does not return any data, but the call seems to have run well, since I don't get an error code. When I post to my webservice via third-party-packaged like boto, I sometimes get a "410 gone" - but I do not find any entry in the lighttpd error log. Any ideas what the problem could be or how to avoid this? Thanks a lot

  Read the article

• How do I route traffic to website using a spcified network connection on Windows 7

  - by rwetzeler

  I want to route all traffic to a website over my wireless connection while the rest of the traffic using my lan. What I tried was first finding out the IP address of the website I want to go to. For example, lets say pandora.com. I found it resolves to 208.85.40.20. I have entered that entry into my hosts file. I then added that route using route add 208.85.40.20 mask 255.255.255.255 WirelessIP. It doesn't seem to work however. Instead of using the IP address, is there a way that I can just say.. this URL to route over that connection? Does anyone know of a program that I can install that will do this.. possibly some sort of proxy or a software load balancer that can do this?

  Read the article

• SSH: one user logs in, other don't

  - by Co Lega

  Some users can ssh correctly, others don't. I have an admin user, which is in wheel. I used vsftpd for allowing FTP. I created a nologin user for FTP. Call this user "ftpuser". Now I want to allow sftp. It allows me to connect using admin user. I remove the nologin, by giving the user a shell via usermod -s /bin/bash ftpuser. It still doesn't allow me to connect from the ftpuser via sftp. The content of /home/ftpuser/.ssh is just the known_hosts file which contains "localhost" entry only. User permissions are (in theory) ok: ls -la /home working (admin) : drwx------ 18 admin admin 4096 Feb 6 15:33 admin non-working(ftpuser): drwx------ 3 ftpuser ftp 4096 Mar 26 15:25 ftpuser I haven't configured anything special on openssh. Does the ftpuser need anything extra than shell to enter via ssh?

  Read the article

• Cisco access list logging. Why is there a difference between IPv4 and IPv6?

  - by growse

  I've got a Cisco 877 router. I've got an IPv4 access list and an IPv6 access list set up and configured similar to this: interface Dialer1 ... ip access-group INTERET-IN ipv6 traffic-filter IPV6-IN Each of these access lists has a final rule of deny ip/ipv6 any any log. However, in my syslog I notice that there's a difference in formatting between the two types of entries. IPv4 will say: %SEC-6-IPACCESSLOGP: list INTERNET-IN denied udp 88.89.209.63(137) -> 1.2.3.4(137), 1 packet Whereas the IPv6 list will say %IPV6_ACL-6-ACCESSLOGNP: list IPV6-IN/240 denied 59 2001:0:5EF5:79FD:14F9:B773:3EBA:3EE3 (Dialer1) -> 2001:800:1000:0::1, 8 packets Both have broadly the same information, but the IPv6 log entry is missing the protocol type and port, both of which are very useful if I'm trying to troubleshoot connectivity. Why is this? How do I get IPv6 deny logs to display the protocol and port used, if any?

  Read the article

• some keys don't appear in xev

  - by sazary

  i can't change my screen brightness by pressing brightness keys on the keyboard, but they change through /sys/class/backlight/acpi_video0/brightness. so i started to diagnose the issue, ran xev and trying to see what happens when i press Fn+F5 or Fn+F6 which are brightness controls, and xev didn't show anything. i must note that it notifies my when i press volume controls, for example. are F5 and F6 keys working? yes, but not when i press them with Fn key. do i have any entry in xmodmap for brightness? yes: keycode 232 = XF86MonBrightnessDown NoSymbol XF86MonBrightnessDown keycode 233 = XF86MonBrightnessUp NoSymbol XF86MonBrightnessUp what's happening? and what should i do to correct it? i'm using vaio s series laptop with kubuntu precise on it. thanx ;)

  Read the article

• ts_block.vbs and mac intosh

  - by Eric Le breton

  I am using your excellent ts_blocker, release 20120530, on my server 2008 R2 Enterprise. it works very fine, i use the vbs script, launched with wscript. The only problem is that is does not work for users attempting to connect RDP from a mac intosh. With this machine the distant IP seems to be not recognized when the login fails. The IP is visible when the login is good (event ID 4624) but not when it fails (Audit failure event ID 4625) : then the IP is not to be seen in the event log ! In the "network information" of the event log entry is nothing given. Have you already been told of that and is there something to do ?

  Read the article

• Trying to get a new user up on pfSense IPSec VPN; Config file import failed, now getting gateway err

  - by Chris

  Caveat: I am not a sysadmin, so please forgive the n00bness of the query. We have a new user and I'm trying to get them up on VPN. We use pfsense as an IPSEC endpoint. This person is using Shrewsoft for the client. I had created an entry in pfsense for them and then edited a previous user's config file. Shrewsoft didn't import the config file very well and I had to hand edit the information. Now we are getting gateway errors. One thing I've noticed is that there is a different between the values of the preshared key stored on the firewall and the psk stored in the config file. I assume it has something to do with a hash, but I've no idea if that's the case and whether that might be what's causing the problem. Any suggestions greatly appreciated! Tangentially, is there some software used to generate these config files?

  Read the article

• Deleting sender from Outlook Safe Senders using GPO?

  - by Hutch

  We're having an external company do a mailshot to our users. The message contains images that are linked rather than embedded in the image (bandwidth isn't an issue). So of course on recent versions of Outlook you're prompted to download the images, not the end of the world, but it would be nice if that didn't happen. There's a bug in the Office/Outlook ADM/ADMX templates that means that a custom list of Safe Senders won't import unless you follow this: http://support.microsoft.com/kb/2252421 Thing is, if I remove an entry from the Safe Senders file, it doesn't seem to remove it from Outlook, which seems odd?

  Read the article

• solaris + EMC + power-path

  - by yael

  please advice - when I run powercf command on my Solaris machine , which changes this command do on the EMC storage , or on Solaris file system ? from maanual page: DESCRIPTION During system boot on Solaris hosts, the powercf utility configures PowerPath devices by scanning the HBAs for both single-ported and multiported storage system logical dev- ices. (A multiported logical device shows up on two or more HBAs with the same storage system subsystem/device identity. The identity comes from the serial number for the logical device.) For each storage system logical device found in the scan of the HBAs, powercf creates a corresponding emcpower device entry in the emcp.conf file, and it saves a primary path and an alternate primary path to that device.

  Read the article

• How can I specify multiple rules for a particular log file(s) with logrotate?

  - by Ether

  I have a logrotate.d config file that looks something like this: /home/myapp/log/* { daily compress dateext ifempty delaycompress olddir /home/myapp/baklog } There are a few particular log files where I want to apply additional rules, such as "mail". How can I apply additional rules to just some files? If I add another rule above that matches the additional files (e.g. /home/myapp/log/warning.log { ... }, I get an error like error: /etc/logrotate.d/myapp:3 duplicate log entry for /home/myapp/log/warning.log. How can I specify multiple rules that match particular files in an overlapping kind of way?

  Read the article

• Logs being flooded from Squid for having intercepted and authentication enabled together

  - by Horace

  I have done some hefty Google'ing and I can't seem to find a single solution to this issue that I cam currently experiencing. Here is a sample configuration from squid that I have: # # DIGEST Auth # auth_param digest program /usr/sbin/digest_file_auth /etc/squid/digpass auth_param digest children 8 auth_param digest realm LHPROJECTS.LAN Network Proxy auth_param digest nonce_garbage_interval 10 minutes auth_param digest nonce_max_duration 45 minutes auth_param digest nonce_max_count 100 auth_param digest nonce_strictness on # Squid normally listens to port 3128 # Squid normally listens to port 3128 http_port 192.168.10.2:3128 transparent https_port 192.168.10.2:3128 intercept http_port 192.168.10.2:3130 As noted above, I have three ports defined, 2 of them are transparent/intercept and one is a regular http port (which I use for authentication). Which works rather well in this configuration however my logs are getting flooded of this entry authentication not applicable on intercepted requests whenever a transparent connection is made. So far, I can't seem to find any documentation that would describe how to suppress these messages ?

  Read the article

• How can HAProxy improve availibility, or "how can I prevent my site from going down"? [closed]

  - by Joe Hopfgartner

  I am aware of what HAProxy does, but what if my HAproxy goes down? Or what if my DNS servers go down? Yes, dns is less the problem. However dns only solves to an IP and an IP is announced via BGP to be routed over some router. What if that router goes down? Of course if I have complicated application servers that are likely to fail HAProxy can significantly improve uptime. But my application isnt. In fact my application may very well just be delivering a small static html file via HTTP. Basically if any user anywhere types in MYDOMAIN.COM, I want the user to get SOMETHING on the screen other than a timeout or DNS resolution error. How can I do that? The point of entry is difficult. The so called "initial closure mechanism".

  Read the article

• CMD: Append to path without duplicating it?

  - by Horst Walter

  For one CMD session I can easily set a new path: SET PATH=%PATH%;"insert custom path here" Doing so in a batch file does not consider whether the custom path is already included. How do I avoid duplicating it (i.e. check whether it is already contained in the PATH "string"). Remarks: Related: How do I append user-defined environment variables to the system variable PATH in Windows 7? Related: How can I permanently append an entry into the system's PATH variable, via command line? Same question for UNIX: Add directory to $PATH if it's not already there

  Read the article

• Problem with php and apache

  - by user47587

  I am having trouble using the php module with apache2. At the moment, testing with a phpinfo script, only php code is displayed as though it were text, no output at all. I have the line LoadModule php5_module libphp5.so, with an absolute path. Yet, when I do apache2 -t -D DUMP_MODULES |grep php, nothing is reported I have my error level set to warn, and the last entry in my logfile after apache starts is [notice] Apache/2.2.15 (Unix) PHP/5.2.12 mod_ssl/2.2.15 OpenSSL/0.9.8g configured -- resuming normal operations Which implies there is php support?

  Read the article

• USB Device With Embedded Fileserver

  - by Richard Martinez

  I'm attempting to access logs from a proprietary hardware box with no reasonable hope of modifying the software. There is a process on the device to dump log files to a flash drive on the USB port after entering a code sequence. Currently, analysis of the logs requires the following: Physical presence at the device Manual entry of the code sequence Removal of USB device Insertion of USB device into a normal Linux box I'm hoping there is some sort of device that can act as a USB mass storage device but simultaneously make it's contents available as a network file share (wired preferred). Does such a device currently exist? A combo hardware/software solution would also work.

  Read the article

• Web server replica not working in other server

  - by user761076

  I have a Drupal installation (php+mysql) in a server, and I'm trying to copy this installation to another server with the same configuration, same physical and virtual path, same db configuration, etc. The thing is, in my new server I get the homepage to work, but not the inner pages, so I guess has something to do with rewrite (mod_rewrite is installed) (both .htaccess are the same). When I access http://localhost/myweb/content/mypage I get a 404 or a "Forbidden" if I uncomment this in httpd.conf (original httpd.conf does not have this entry): <Directory path/to/docs"> DirectoryIndex index.php index.html Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> Any clue? Thank you

  Read the article

• How to make local apache server public/visible ?

  - by George

  Hello. I am running an Apache2 server on a Fedora 13. I'd like to make it publicly accessible(visible).For example I'd like when somebody types http://my.ip.numbes/ that they would see what I have in my document root folder. Just for a presentation of a course work at university. Permissions are set to 755. User owning the document root is apache. SELinux is temporarily disabled. But port 80 is closed. I tried to open it by adding an entry to iptables and restarting them, no change. I guess I am missing something big here. Help would be greatly appreciated. Note: I have a static (public, real) IP address.

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >