Search Results

Search found 5643 results on 226 pages for 'machines'.

Page 118/226 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• What is the old AIX & RS/6000 console font?

  - by Xepoch

  I'm sick of Lucida Console font on my putty sessions. I used to love whatever font was employed on IBM rs/6000 consoles. Does anyone know the name of that font and if it is available (and usable) from anywhere? Sorry, I need to clarify the "consoles" to which I refer were not the serial consoles but rather smaller stand-alone X-Window systems. They could be setup without XDM and would start in text screen. I'm searching like crazy to find the actual machines I remember (there were hundreds of them at Uni) but I don't have the IBM #s in front of me. It looked amazingly similar to the PS/2 like this:

  Read the article

• How to persist changes to instances in the cloud.

  - by Peter NUnn

  Hi folks, I must be missing something here, but can someone clue me in on how to persist changes (such as software installs etc) on machines in the cloud (either EC2 or my own Eucalyptus cloud). I have instances running.. can attach extra disks to them etc., but every time I terminate the instance, all of my changes are lost the next time I run them. Now, this sort of makes sense in that the instances are virtual, but, there must be some way to make these changes persist. I'm just missing how its done. Thanks. Peter.

  Read the article

• Stable MSN messenger for mac?

  - by Console

  I use Adium in my mac as a client for MSN messenger. (I have also tried the "official" live messenger for mac for a while but it had even worse issues than what I am experiencing with Adium). Everything works fine for the first 5-10 minutes, perhaps until the first automatic "away", then suddenly any message I send is followed by a dozen or so messages saying: "Message could not be sent because a connection error occurred:" and Message may have not been sent because a timeout occurred: If I send a few messages, they usually eventually arrive (all at once) after a long delay. Windows machines on the same network running live messenger work fine. Any ideas why this might be, or suggestions for a client that might work when both Adium and Microsofts own messenger for mac seem to disconnect?

  Read the article

• SNMPD - passing values in a trap

  - by ethrbunny

  Im trying to create an SNMP setup to monitor 500-1K machines. Each will be joined to the SNMPTRAPD server via a VPN. When the client system sends its messages, it's sending its internal address instead of the VPN address even though the 'trapsync' command is using the VPN. This will be a problem as many of these system will have DHCP addresses based on location so there will be overlap. What I'd like to figure out is how to pass extra values with the trap so I can identify which system a given trap comes from.

  Read the article

• VPN using Zywall

  - by Rune FS

  I've played around with a certificate based VPN (normally I don't do hardware) we've manged to setup the connection and the tunnel between the routers is working correctly. We now need the last step. There's no connection to the computers on the other end. What could we have forgotten? (we're testing with two standard configured Win7 machines) EDIT: Just to clarify the tunnel is working I can ping the router on the other end. I can't access the computers on the other side of that router and vice versa. (It's also possible to access the remotemangement console of the remote router on the LAN IP)

  Read the article

• Prevent Server Restart after Windows Updates

  - by eidylon

  we have a number of servers in our office, as a small hosting company, and these servers are critical to business, ... web server, mail server, db server, etc. On a semi-regular basis, when the machines get automatic updates, they just automagically reboot themselves in the middle of the night. A number of them have software which must be running on the console session (bad practice, I know, but out of my control). When they reboot themselves, these programs obviously shut down, leaving customers upset and services interrupted. How do you set a Windows Server 2003 R2 machine to NEVER automagically reboot itself after updates? And perhaps, if possible, to instead email someone so that they are aware it needs a pending reboot and can schedule it for the best time? Thanks in advance!

  Read the article

• Sharing internet connection over VPN in Windows XP

  - by Nigel Hawthorne

  How can I share my internet connection with VPN clients using the Windows XP built-in VPN server? I want to be able to use my home internet connection (on an XP machine) from my anywhere using my laptop (Windows 7 machine). The built-in VPN server in XP and the VPN client in Windows 7 seem to do a great job of giving me access to both machines securely over the internet, but I cannot find a way to use ICS in conjunction with the incoming connection to give access to my home internet connection to my laptop remotely. Is there a way to do this? or is there an alternative VPN server software that is not limited to only local access?

  Read the article

• Limit download usage for clients

  - by Kumar P

  i am maintaining few windows xp machines under rhel 5 . i want to set quota for download file size. How to do it ? I mean, in lan usar A's maximum donload file size is 300 MB , and user B's maximum download file size in 200 MB. I want to block downloading when user try to download more than 300 MB file.User should not allow to download 300MB file at a time. Or how to set quota for maximum download per day, is there possible to do it ? How can i do this ?

  Read the article

• Should I replace libapache2-mod-php5-filter with libapache2-mod-php5 on Debian 6 Apache 2.2.16?

  - by luison

  Upgrading various virtual machines we are having an issue with the Debian package upgrade to version 2.2.16 The upgrade (surprisingly) seems to remove libapache2-mod-php5 replacing it with libapache2-mod-php5-filter. This gave us some headache as the php.ini was pointing to the "old" one and some of the apache.conf conditional module rules stopped working. We can fix all those but we can't figure out if there would be any issues if we just "reversed" this and simply install libapache2-mod-php5 again and load that module instead of the "filter" one or in there is anyway to "alias" a module. I tend to think that the change "has a reason" but after reading apache2 and php5: module or filter I understand the module differences are to do with post delivery security issues.

  Read the article

• server 2008 sp2 hung not responding with kvm reset as well

  - by dasko

  using server 2008 sp2 64bit os standard edition with all updates from ms site. server was hung this morning, resetting kvm did nothing, plugging in another usb mouse on the back did not let the mouse light up red on it's optic end. other machines on the kvm worked fine including the mouse. server is rack mounted 4u supermicro systems or superserver. had to hard power off and restart. any thoughts? i burnt this system in well for a couple of weeks before deploying so it is kind of odd that this happened. any help is greatly appreciated, or if anyone can suggest software to install that can maybe send out the email when something like that goes down. i looked for the minidump but nothing. nothing in the event viewers either. gd

  Read the article

• Multi-Domain Root Administrator

  - by Brent Pabst

  We have a new domain structure we are planning on rolling out in the next few months. Essentially there is a single top level and forest domain controller "mydomain.lan" and two children "us.mydomain.lan" and "pl.mydomain.lan". We want to configure an administrator account or two at the top level domain that then has full administrator permissions on the sub domains. By default the top level administrator cannot access or login to machines on the sub-domains. Running W2K8R2. Ideas?

  Read the article

• Custom kernel with NFS client support

  - by Vaibhav

  I'm trying to build a custom Linux kernel using this link I have successfully built the kernel and booted into it. Now I want to mount NFS share on it. I have enabled NFS client support from menuconfig . Update : I'm trying to mount a NFS share from newly built kernel. I have tried adding a NFS client support to the kernel. Following command shows (From newly built kernel) #cat /proc/filesystems nodev nfs nodev usbfs ext3 vfat .... Which shows that kernel support NFS filesystem but, mount command fails to mount NFS share, which is working fine on other machines. Help will be appreciated.

  Read the article

• Automatic Remote REGEDIT?

  - by SUPER MARIO BROTHERS

  I've got a lot of computers on the domain here that do not have remote desktop enabled. I can open the command prompt and do this command: REG.exe ADD \\[the machine im doing this to]\HKLM\SYSTEM\CurrentControlSet\ Control\\"Terminal Server" /v fDenyTSConnections /t REG_DWORD /d 0 and it works perfectly fine, except for one thing - it makes a prompt asking if I'm sure I want to do this, Yes/No. How would I go about having a batch file auto-answer YES to this, so I don't have to type it every time? It wouldn't be a problem if it was just a couple hundred machines, but there's plenty more than that and it would take a while to do this by hand. Not to mention I might have to sweep a few times to make sure every computer is turned on and is affected by this.

  Read the article

• hardware leasing vs purchase

  - by musoNic80

  I'm wanting to get a new laptop and desktop. I'm self-employed and so both bits of kit are primarily for business use. I've been looking into leasing both computers as an alternative to purchasing outright. Does anyone have any experience of this? I'm UK based and have found a company called hardsoft which seem to offer a good service. I'm particularly attracted by the upgrade after 18 months option and the fact that the machines are under warranty for the lift of the lease. I'd be really grateful for general thoughts, especially if there are any UK users or hardsoft clients.

  Read the article

• Multicast accross the subnets

  - by Hasan Khan

  My application sends some UDP packets on a multicast address. In our office we have 3 subnets connected via routers. Sitting in my subnet I'm able to ping the IP of the other subnet. Will multicast packets cross my subnet and reach the machines of other subnets? Or router will need some configuration? Or do I have to program a bridge for it? Please note that I do not know anything about Networking. Kindly tell me something that I can ask my network admin to do.

  Read the article

• Network connectivity logs on OSX

  - by Stephen

  I'm trying to determine whether or not Macs store a log of network connectivity. Specifically, I'm trying to find out if one of my machines (Mac Tower, OSX 10.7.4, 2-2.26 GHz, 16 GB DDR3) lost connection to pinpoint an issue. This machine is on an external network where and the IT staff is not very helpful, so I'm trying to ensure that there were network issues rather than some other local issue on that particular machine. Can you pull network logs thru Console that show when a network connection was established and was disconnected?

  Read the article

• How can I share a Windows 7 library with anonymous access without using a Homegroup?

  - by Triynko

  The "homegroup" feature is useless, because it requires a password, and therefore doesn't support anonymous, no-hassle access to shares from devices such as my Sony Bravia TV and non-Windows7 machines. So I turned off homegroup and reverted to the standard shared folders protocol. I'd like to share my Music "Library", so I can play files from my TV through the Surround Sound System, but there seems to be no option to share a library folder other than through a homegroup. I don't want to have to individually share the folders that belong to the library, because that would defeat the purposes of the library, which is to manage which folders are included in the library while also providing an easily accessible view of them all at once. Does anyone know how to share a Windows 7 library without that useless homegroup feature?

  Read the article

• Sharing external storage between different operating systems?

  - by CT

  I just received a Lacie 1TB external usb/firewire/esata drive. I have 2 machines. A macbook running osx 10.6 and a desktop running windows 7. I would like to rip my dvd collection to iso and store on my external. Right now I use my macbook's disk utility to rip dvds to iso. However my desktop is what is connected to my hdtv. I mainly just use the desktop for media. I'd like to format the external with a 200 GB partition for time machine backups and have the rest for storage. DVD iso are often above 8GB so that sort of eliminates FAT file systems correct? Do I have any options to be able to have my mac and pc both see the drive?

  Read the article

• Import a puppet manifest from the node itself?

  - by bobinabottle

  I have a somewhat unique situation. Our systems team manages our main puppet master, and the development team is fine with everything however they are thinking of using it to control some elements on their desktop machines, whilst still being connected to our central puppet master. Since we don't want the changes they make to go into our puppet master.. is there a way of puppet importing a manifest from the node directly? As in.. on the developer machine, they put a file "/root/development.pp" or something, and then on our puppet master we put something like node { "developermachine": # Do the majority of normal things # import "/root/development.pp" } We have a few different options we can take about security of write access to the puppet manifests, but if puppet were to support something like this it would probably be the cleanest for us. Any help is appreciated :)

  Read the article

• Vista Remote Desktop Mouse Drag Not Working

  - by Paul Lynch

  I've been using Remote Desktop to connect from a Windows Vista machine to a Windows XP machine. Everything used to work fine, but a few weeks ago I found that I could not drag things with my mouse. I can click on things just fine, but I cannot move or resize windows or select text with the mouse. I did some experimenting, and it seems that the remote machine behaves as though it gets a mouse up event shortly after it gets the mouse down event, even though I am still holding the button down. On both machines, things work fine outside of Remote Desktop. I did reinstall the OS and software on my Windows Vista machine a couple of months ago, and that might have been about the same time that this problem appeared. I don't frequently use Remote Desktop, so I can't be sure. Does anyone have any suggestions?

  Read the article

• Ubuntu Karmic - Net connection unusually laggy

  - by bguiz

  Hi, I've just installed Ubuntu 9.10 and fired up Firefox, what I have noticed is that the Internet is slower than it is with the other machines that I have with identical connection. In particular, it takes it a long time for it to look up a server. Once downloading has begun, the speeds are normal, but it is very very laggy prior to starting the download: Firefox's status bar reports Looking up <server>... for up to 15 seconds, where it would usually just flicker for a fraction of a second. Any ideas on what could be causing this and suggested fixes? Thanks!

  Read the article

• RAID0 array of USB 2 disks, both connected to a single hub. Any benefit?

  - by Josh

  I have two unused USB 2 drives. I wanted to stripe them in a RAID0 configuration for fast disk access for virtual machines. (I find running a VMware virtual machine off a USB2 drive to be painfully slow. Especially Windows Vista) If I have both USB drives attached to the same USB2 hub, will that negate any benefit I gain by creating a RAID0 array? That is to say, is the speed of USB2 the limiting factor or is the speed of the drives? Would I get better performance by attaching one or both drives directly to my computer?

  Read the article

• Converting a Full HD Inspiron 9400 laptop LCD to a standalone monitor

  - by jhaukur

  Has anyone tried converting a LCD laptop monitor (17" full HD in this instance) to a stand-alone monitor? Are there any converters that one can buy to send DVI or VGA signals to the plug that is used to connect said LCD to the laptop motherboard? My laptop is the infamous Dell Inspiron 9400 (1705) model. They can have awesome monitors but if you check out ebay, there are many there for sale for little to nothing since the graphic cards fault unsually often in those machines. I'd like to be able to use the LCD and just scrap the rest.

  Read the article

• How is my password sent across when I check gmails/access bank site [closed]

  - by learnerforever

  What encryption is used when my password is sent across in gmails/when I do online banking? RSA? DSA? Public-private key encryption?. In key encryption, which entity is assigned a public/private key? Does each unique machine with unique MAC address has a unique public/private key? Does each instance of browser have unique key? Does each user have unique private/public key? How does session key come into picture? How do machines receive their keys?

  Read the article

• Mixed network, Linux-to-Linux hostname resolution issues

  - by James

  At work we have an WinSBS domain at the heart of our network, which is all Windows PCs. The domain controller is acting as a DNS for these computers. I have recently added some personal use Linux machines to the network, without joining them to the domain. I have set up Samba with "wins server" pointing to the domain controller, which lets the Windows boxes resolve the Linux hostnames just fine. I also have resolvconf set up with the domain controller as a nameserver and the local domain as a searched domain, which lets the Linux boxes resolve the Windows hostnames just fine. However, the Linux boxes will not resolve other Linux hostnames at all. Given that I don't have control over the DNS server (I am not the network admin) and that at least one of the Linux boxes is not an always-on machine and is likely to change its LAN IP frequently (via DHCP), what service am I missing to make their hostnames visible to each other?

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >