Search Results

Search found 10169 results on 407 pages for 'port'.

Page 119/407 | < Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >

  • Unable to ping inside or outside network with default gateway 0.0.0.0

    - by agentroadkill
    I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

    Read the article

  • The Internet Key Wave MW833UP is not recognized in Ubuntu

    - by gio900
    I can't use my Onda MW833UP... :( Any advice? Here is something that someone else may understand: ~$: lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric ~$: lsusb Bus 001 Device 005: ID 1ee8:0012 ~$: dmesg [ 22.709475] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 22.714856] usbcore: registered new interface driver cdc_acm [ 22.714866] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 23.520490] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 24.244530] usbcore: registered new interface driver usbserial [ 24.244575] USB Serial support registered for generic [ 24.244673] usbcore: registered new interface driver usbserial_generic [ 24.244681] usbserial: USB Serial Driver core [ 24.265879] USB Serial support registered for GSM modem (1-port) [ 24.285680] usbcore: registered new interface driver option [ 24.285691] option: v0.7.2:USB Driver for GSM modems [ 24.425878] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=600 [ 24.736540] EXT4-fs (sda8): re-mounted. Opts: commit=600 [ 35.705796] Easy slow down manager: checking for SABI support. [ 35.706002] Easy slow down manager: SABI is supported (f5189) [ 36.060099] usbcore: deregistering interface driver uvcvideo [ 139.508061] CE: hpet increased min_delta_ns to 20113 nsec [ 6798.378917] usb 1-1: USB disconnect, device number 5 [ 6809.108232] usb 1-1: new high speed USB device number 6 using ehci_hcd [ 6809.242692] scsi5 : usb-storage 1-1:1.0 [ 6810.241257] scsi 5:0:0:0: CD-ROM Onda Datacard CD-ROM 0001 PQ: 0 ANSI: 0 [ 6810.241841] scsi 5:0:0:1: Direct-Access Onda Storage 0001 PQ: 0 ANSI: 0 [ 6810.271410] sr0: scsi3-mmc drive: 0x/0x caddy [ 6810.272099] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 6810.272852] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 6810.279954] sd 5:0:0:1: [sdb] Attached SCSI removable disk [ 6810.281210] sd 5:0:0:1: Attached scsi generic sg2 type 0 [ 6810.380591] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.380617] sr: Sense Key : Hardware Error [current] [ 6810.380625] sr: Add. Sense: No additional sense information [ 6810.613937] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.613972] sr: Sense Key : Hardware Error [current] [ 6810.613984] sr: Add. Sense: No additional sense information [ 6810.673716] usb 1-1: USB disconnect, device number 6 [ 6815.572142] usb 1-1: new high speed USB device number 7 using ehci_hcd [ 6815.706828] cdc_acm 1-1:1.0: ttyACM0: USB ACM device The last 3 lines are where I inserted the Internet key, then reconnected it. usb-device T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1ee8 ProdID=0012 Rev=00.01 S: Manufacturer=Onda S: Product=MW833UP S: SerialNumber=9230B35D870F9CB7AE684EACC5C12BE5EC33B26E C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm Then there is /dev/ttyACM0. When the key is connected to the USB port, everything that will meant...

    Read the article

  • Webmin - Setting up multiple virtual hosts - Subdomains

    - by Aaron
    Can someone please help me in using WEBMIN to setup virtual hosts. My current domain www.MYDOMAINLOLFAKE.com currently functions. Settings are as follows - Apache - Handles the name-based server www.MYDOMAINLOLFAKE.com on all addresses Address Any Port 80 Server Name www.MYDOMAINLOLFAKE.com Document Root /var/www/html BIND DNS Server - Master Zone MYDOMAINLOLFAKE.com ns1.mydomainlolfake.com IPHERE - works ns2.mydomainlolfake.com IPHERE - works mydomainlolfake.com IPHERE - works www.mydomainlolfake.com IPHERE -works mail.mydomainlolfake.com IPHERE - works ftp.mydomainlolfake.com IPHERE - works What I need - something.mydomainlolfake.com -- CANT GET THIS TO WORK What I tried - Create new virtual host Handles the name-based server something.mydomainlolfake.com on something.mydomainlolfake.com Address Any Port 81 Document Root: /var/www/vhosts/something What happens - I create the new VHOST and then ALL address try to go to that new Document root. I need different addresses to go to their respective folders. Can someone please give me better instructions on how to set that up using webmin? TLDR# How do I make a something.mydomainlolfake.com subdomain work in webmin on my CENTOS 6 web server?

    Read the article

  • How to change the IP address on my Ubuntu virtual NIC

    - by DextrousDave
    I have a physical windows system, on which I run Vmware Workstation. Now on VMware I run Ubuntu 12.10. I am running a webserver on Ubuntu via LAMP, inside VMware. Problem: Now my local IP address for my virtual NIC (the one Ubuntu is using) has an address of 192.168.159.7, and my home router only issues IP addresses of the range 10.0.0.x. So if I want to port forward to the virtual NIC, which has a 192.168 address, I cannot, so my LAMP webserver cannot be accessed externally since the router does not know to send the packets on port 80 to the virtual NIC... How do I fix that? The only way I guess is to assign a 10.0.0.x ip address to the virtual NIC?? But how do I do that? I tried to do it on the host Windows machine with 'Get my IP address automatically' but it issues a 192.168 address every time... Thank you

    Read the article

  • Simpler Times

    - by Simon Moon
    Does anyone else out there long for the simpler days where you needed to move a jumper in the jumper block to set your modem card to use IRQ7 so it would not conflict with the interrupts used by other boards in your PC and your modem card came with a 78 page manual telling you everything you would need to know to write your own driver for the board including a full schematic along with the board layout showing every chip, capacitor, and resistor?  Ahhhhh, the simplicity!I am wrestling with UserPnp issues for a USB software licensing dongle that is needed by some third party software in one of our production applications. Of course, every machine in production is virtual, so it could be anything in the chain of the software application library to the device driver running on the VM to the configuration of the simulated USB port to the implementation of the USB connection and transport in the virtual host to the physical electrical connections in the USB port on the hypervisor.If only there were the virtual analog to a set of needle-nose pliers to move a virtual jumper.Come to think of it, I always used to drop those damn things such that they would land in an irretrievable position under the motherboard anyway.

    Read the article

  • Are there any alternative JS ports of Box2D?

    - by Petteri Hietavirta
    I have been thinking about creating a top down 2D car game for HTML5. For my first game I wrote the physics and collisions my self but for this one I would like to use some ready made library. I found out Box2D and its JS port. http://box2d-js.sourceforge.net It seems to be quite old port, made in 2008. Is it lacking many features of current Box2D or does it have major issues with it? And are there any alternatives for it?

    Read the article

  • DVC101 Video Capture Device on USB hub - Ubuntu Server 12.04

    - by John
    I have a Dell Inspiron 8600 laptop I use as a media server/video capture system. It only has 2 USB ports and I have a total of 3 devices I need to connect. The DVC101 works perfectly while plugged directly into the USB port in back of the laptop. Unfortunately it does not get recognized when plugged into a passive or powered USB hub. Questions: Is there something I am missing on the Ubuntu side? Something I need to do that will allow the device to be recognized through the hub? If not, will the extra USB ports on a dell laptop dock (port replicator) act the same as the aftermarket hubs? I know this one is off topic of Ubuntu but any input appreciated.

    Read the article

  • Multicasting and VMWare

    - by John Breakwell
    Cracked a Multicasting problem this evening for one of my Canadian Tweeple. They wanted to mulitcast some MSMQ messages to another machine but nothing was arriving in the listening queue. A local queue could be configured to listen to the particular IP address/port in use and messages would arrive, though. Looking at the network traffic, nothing was going onto the wire for the IP address/port pair until they looked at traffic to the VMWare adapter. The machine had a virtual machine to simulate a remote computer and when they changed the setup from NAT to Bridge, multicasting burst into life.

    Read the article

  • I was stuck in implementing Simple Ftp with Winsock [migrated]

    - by user67449
    I want to implement a SimpleFtp with Winsock. But I was stuck in the maybe the file stream reading and writing. This is the Server. #include <WinSock2.h> #include <memory.h> #include <stdio.h> #include <iostream> using namespace std; #pragma comment(lib, "ws2_32.lib") #define MAX_FILE_NAME 100 #define DATA_PACK_SIZE 80*1000 // ??DataPack?????80KB #define SOCKKET_BUFFER_SIZE 80*1000 // socket??? #define FILE_BUFFER_SIZE DATA_PACK_SIZE-MAX_FILE_NAME-4*sizeof(int)-sizeof(u_long) //?????,??,??????content????? #define CONTENT_SIZE FILE_BUFFER_SIZE // DataPack?????content??? // Define a structure to hold the content of a file typedef struct FilePack{ char fName[MAX_FILE_NAME]; // File's name int fLen; // File's length int packNum; // Number of the DataPack int packLen; // DataPack's length int packCount; int contenLen; // the content length the DataPack actually holds u_long index; // ?????????? char content[CONTENT_SIZE]; // DataPack?????? }DataPack, *pDataPack; void WinsockInitial(){ WSADATA wsaData; WORD wVersionRequested; int err; wVersionRequested=MAKEWORD(2,2); err=WSAStartup(wVersionRequested, &wsaData); if(err!=0){ cout<<"Error at WSAStartup()."<<endl; exit(0); } if( LOBYTE(wsaData.wVersion)!=2 || HIBYTE(wsaData.wVersion)!=2 ){ cout<<"Error at version of Winsock. "<<endl; WSACleanup(); exit(0); } } void SockBind(SOCKET sock, int port, sockaddr_in &addrsock){ addrsock.sin_family=AF_INET; addrsock.sin_port=htons(port); addrsock.sin_addr.S_un.S_addr=htonl(INADDR_ANY); if( bind(sock, (sockaddr*)&addrsock, sizeof(addrsock)) == SOCKET_ERROR ){ cout<<"Error at bind(). Error: "<<GetLastError()<<endl; closesocket(sock); WSACleanup(); exit(0); } } void SockListen(SOCKET sock, int bak){ int err=listen(sock, bak); if(err==SOCKET_ERROR){ cout<<"Error at listen()."<<WSAGetLastError()<<endl; closesocket(sock); WSACleanup(); exit(0); } } int SockSend(DataPack &dataPack, SOCKET sock, char *sockBuf){ int bytesLeft=0, bytesSend=0; int idx=0; bytesLeft=sizeof(dataPack); // ?DataPack?????sockBuf??? memcpy(sockBuf, &dataPack, sizeof(dataPack)); while(bytesLeft>0){ bytesSend=send(sock, &sockBuf[idx], bytesLeft, 0); if(bytesSend==SOCKET_ERROR){ cout<<"Error at send()."<<endl; return 1; } bytesLeft-=bytesSend; idx+=bytesSend; } return 0; } int GetFileLen(FILE *fp){ // ?????? if(fp==NULL){ cout<<"Invalid argument. Error at GetFileLen()."<<endl; exit(0); } fseek(fp, 0, SEEK_END); int tempFileLen=ftell(fp); fseek(fp, 0, SEEK_SET); return tempFileLen; } int main(){ int err; sockaddr_in addrServ; int port=8000; // Initialize Winsock WinsockInitial(); // Create a socket SOCKET sockListen=socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); if(sockListen==INVALID_SOCKET){ cout<<"Error at socket()."<<endl; WSACleanup(); return 1; } // Bind the socket. SockBind(sockListen, port, addrServ); // Listen for incoming connection requests cout<<"Waiting for incoming connection requests..."<<endl; SockListen(sockListen, 5); // Accept the connection request. sockaddr_in addrClient; int len=sizeof(addrClient); SOCKET sockConn=accept(sockListen, (sockaddr*)&addrClient, &len); if(sockConn!=INVALID_SOCKET){ cout<<"Connected to client successfully."<<endl; } // Set the buffer size of socket char sockBuf[SOCKKET_BUFFER_SIZE]; int nBuf=SOCKKET_BUFFER_SIZE; int nBufLen=sizeof(nBuf); err=setsockopt(sockConn, SOL_SOCKET, SO_SNDBUF, (char*)&nBuf, nBufLen); if(err!=0){ cout<<"Error at setsockopt(). Failed to set buffer size for socket."<<endl; exit(0); } //??????????? err = getsockopt(sockConn, SOL_SOCKET, SO_SNDBUF, (char*)&nBuf, &nBufLen); if( SOCKKET_BUFFER_SIZE != nBuf){ cout<<"Error at setsockopt(). ?socket????????"<<endl; closesocket(sockListen); closesocket(sockConn); WSACleanup(); exit(0); } //------------------------------------------------------------------------// DataPack dataPackSend; memset(&dataPackSend, 0, sizeof(dataPackSend)); int bytesRead; int bytesLeft; int bytesSend; int packCount; // Counts how many DataPack needed FILE *frp; // Used to read if(strcpy_s(dataPackSend.fName, "music.mp3")!=0){ cout<<"Error at strcpy_s()."<<endl; return 1; } // Open the file in read+binary mode err=fopen_s(&frp, dataPackSend.fName, "rb"); if(err!=0){ cout<<"Error at fopen_s()."<<endl; return 1; } char fileBuf[FILE_BUFFER_SIZE]; // Set the buffer size of File if(setvbuf(frp, fileBuf, _IONBF, FILE_BUFFER_SIZE)!=0){ cout<<"Error at setvbuf().Failed to set buffer size for file."<<endl; closesocket(sockListen); closesocket(sockConn); WSACleanup(); exit(0); } // Get file's length int fileLen=GetFileLen(frp); cout<<"File ???:"<<fileLen<<" bytes."<<endl; // Calculate how many DataPacks needed packCount=ceil( (double)fileLen/CONTENT_SIZE ); cout<<"File Length: "<<fileLen<<" "<<"Content Size: "<<CONTENT_SIZE<<endl; cout<<"???"<<packCount<<" ?DataPack"<<endl; int i=0; for(i=0; i<packCount; i++){ //?????dataPackSend????? memset(&dataPackSend, 0, sizeof(dataPackSend)); // Fill the dataPackSend if(strcpy_s(dataPackSend.fName, "abc.txt")!=0){ cout<<"Error at strcpy_s()."<<endl; return 1; } dataPackSend.packLen=DATA_PACK_SIZE; dataPackSend.fLen=fileLen; dataPackSend.packCount=packCount; if( packCount==1 ){ //??DataPack??? bytesRead=fread(fileBuf, 1, dataPackSend.fLen, frp); dataPackSend.contenLen=dataPackSend.fLen; memcpy(dataPackSend.content, fileBuf, bytesRead); dataPackSend.packNum=0; //???????DataPack // ?????dataPackSend?Client? if( SockSend(dataPackSend, sockConn, sockBuf)==0 ){ cout<<"??? "<<dataPackSend.packNum<<" ?DataPack"<<endl; } }else if( packCount>1 && i<(packCount-1) ){ // ???(???????) bytesRead=fread(fileBuf, 1, CONTENT_SIZE, frp); dataPackSend.contenLen=CONTENT_SIZE; memcpy(dataPackSend.content, fileBuf, bytesRead); dataPackSend.packNum=i; //?dataPackSend??????Client? if( SockSend(dataPackSend, sockConn, sockBuf)==0 ){ cout<<"??? "<<dataPackSend.packNum<<" ?DataPack."<<endl; } }else{ // ????? bytesRead=fread(fileBuf, 1, (dataPackSend.fLen-i*CONTENT_SIZE), frp); dataPackSend.contenLen=dataPackSend.fLen-i*CONTENT_SIZE; memcpy(dataPackSend.content, fileBuf, bytesRead); dataPackSend.packNum=i; //?dataPackSend???Client? if( SockSend(dataPackSend, sockConn, sockBuf)==0 ){ cout<<"??? "<<dataPackSend.packNum<<" ?DataPack."<<endl; } } } fclose(frp); closesocket(sockListen); closesocket(sockConn); WSACleanup(); return 0; } And this is Client. #include <WinSock2.h> #include <memory.h> #include <stdio.h> #include <iostream> using namespace std; #pragma comment(lib, "ws2_32.lib") #define MAX_FILE_NAME 100 #define DATA_PACK_SIZE 80*1000 // ??DataPack?????80KB #define SOCKKET_BUFFER_SIZE 80*1000 // socket??? #define FILE_BUFFER_SIZE DATA_PACK_SIZE-MAX_FILE_NAME-4*sizeof(int)-sizeof(u_long) //?????,??,??????content????? #define CONTENT_SIZE FILE_BUFFER_SIZE // DataPack?????content??? // Define a structure to hold the content of a file typedef struct FilePack{ char fName[MAX_FILE_NAME]; // File's name int fLen; // File's length int packNum; // Number of the DataPack int packLen; // DataPack's length int packCount; //DataPack??? int contenLen; // the content length the DataPack actually holds u_long index; // ?????????? char content[CONTENT_SIZE]; // DataPack?????? }DataPack, *pDataPack; void WinsockInitial(){ WSADATA wsaData; WORD wVersionRequested; int err; wVersionRequested=MAKEWORD(2,2); err=WSAStartup(wVersionRequested, &wsaData); if(err!=0){ cout<<"Error at WSAStartup()."<<endl; exit(0); } if( LOBYTE(wsaData.wVersion)!=2 || HIBYTE(wsaData.wVersion)!=2 ){ cout<<"Error at version of Winsock. "<<endl; WSACleanup(); exit(0); } } int SockRecv(SOCKET sock, char *sockBuf){ int bytesLeft, bytesRecv; int idx=0; bytesLeft=DATA_PACK_SIZE; while(bytesLeft>0){ bytesRecv=recv(sock, &sockBuf[idx], bytesLeft, 0); if(bytesRecv==SOCKET_ERROR){ cout<<"Error at recv()."<<endl; return 1; } bytesLeft-=bytesRecv; idx+=bytesRecv; } return 0; } int main(){ int err; sockaddr_in addrServ; int port=8000; // Initialize Winsock WinsockInitial(); // Create a socket SOCKET sockClient=socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); if(sockClient==INVALID_SOCKET){ cout<<"Error at socket()."<<endl; WSACleanup(); return 1; } // Set the buffer size of socket char sockBuf[SOCKKET_BUFFER_SIZE]; int nBuf=SOCKKET_BUFFER_SIZE; int nBufLen=sizeof(nBuf); err=setsockopt(sockClient, SOL_SOCKET, SO_RCVBUF, (char*)&nBuf, nBufLen); if(err!=0){ cout<<"Error at setsockopt(). Failed to set buffer size for socket."<<endl; exit(0); } //??????????? err = getsockopt(sockClient, SOL_SOCKET, SO_RCVBUF, (char*)&nBuf, &nBufLen); if( SOCKKET_BUFFER_SIZE != nBuf){ cout<<"Error at getsockopt(). ?socket????????"<<endl; closesocket(sockClient); WSACleanup(); exit(0); } // Connect to the Server addrServ.sin_family=AF_INET; addrServ.sin_port=htons(port); addrServ.sin_addr.S_un.S_addr=inet_addr("127.0.0.1"); err=connect(sockClient, (sockaddr*)&addrServ, sizeof(sockaddr)); if(err==SOCKET_ERROR){ cout<<"Error at connect()."<<GetLastError()<<endl; closesocket(sockClient); WSACleanup(); return 1; }else{ cout<<"Connected to the FTP Server successfully."<<endl; } /* int i=0; int bytesRecv, bytesLeft, bytesWrite; int packCount=0, fLen=0; DataPack dataPackRecv; //?????? SockRecv(sockClient, sockBuf); memcpy(&dataPackRecv, sockBuf, sizeof(dataPackRecv)); cout<<"???? "<<dataPackRecv.packNum<<" ?DataPack."<<endl; cout<<"?DataPack??fName????: "<<dataPackRecv.fName<<endl; //??????? packCount=dataPackRecv.packCount; cout<<"?? "<<packCount<<" ?DataPack."<<endl; fLen=dataPackRecv.fLen; // Create a local file to write into FILE *fwp; err=fopen_s(&fwp, dataPackRecv.fName, "wb"); if(err!=0){ cout<<"Error at creat fopen_s(). Failed to create a local file to write into."<<endl; return 1; } // Set the buffer size of File char fileBuf[FILE_BUFFER_SIZE]; if(setvbuf(fwp, fileBuf, _IONBF, FILE_BUFFER_SIZE)!=0){ cout<<"Error at setvbuf().Failed to set buffer size for file."<<endl; memset(fileBuf, 0, sizeof(fileBuf)); closesocket(sockClient); WSACleanup(); exit(0); } //???????content???? memcpy(fileBuf, dataPackRecv.content, sizeof(dataPackRecv.content)); bytesWrite=fwrite(fileBuf, 1, sizeof(fileBuf), fwp); if(bytesWrite<sizeof(fileBuf)){ cout<<"Error at fwrite(). Failed to write the content of dataPackRecv to local file."<<endl; } //?????packCount-1????????????????? for(int i=1; i<packCount; i++){ // ????????? memset(sockBuf, 0, sizeof(sockBuf)); memset(&dataPackRecv, 0, sizeof(dataPackRecv)); memset(fileBuf, 0, sizeof(fileBuf)); SockRecv(sockClient, sockBuf); memcpy(&dataPackRecv, sockBuf, sizeof(dataPackRecv)); cout<<"???? "<<dataPackRecv.packNum<<" ?DataPack."<<endl; //???? memcpy(fileBuf, dataPackRecv.content, dataPackRecv.contenLen); bytesWrite=fwrite(fileBuf, 1, dataPackRecv.contenLen, fwp); if(bytesWrite<dataPackRecv.contenLen){ cout<<"Error at fwrite(). Failed to write the content of dataPackRecv to local file."<<endl; } } if( (i+1)==packCount ){ cout<<"??DataPack????????!"<<endl; } fclose(fwp); closesocket(sockClient); WSACleanup(); return 0;*/ }

    Read the article

  • Second monitor not coming back on after going into hibernate

    - by dabraude
    10 and a new problem has come up. When I my machine hibernates the second monitor does not come back on. I did not have this problem in 11.04. The main monitor is plugged into a vga port, and the second plugged into a display port then an adapter to vga the system is a Dell Optiplex 790 and the graphics card is (according to lspci) a VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) I am running the classic Gnome desktop though the problem occurs in Unity as well.

    Read the article

  • How to start vnc server on-demand (not on boot)

    - by QRohlf
    I have a vps which has the basic xfce environment & tightvncserver installed. I would like to have tightvncserver automatically start whenever I initiate a connection to the port it runs on (in my case, 5901). I've seen posts about using inetd or xinetd to do this, but I've also seen lots of posts saying that (x)inetd is not included in Ubuntu for a reason, and that it's a bad idea to use it. Anyways, I'm looking for a way to auto-start tightvncserver whenever there's an incoming connection to port 5901, preferably with as few dependencies as possible

    Read the article

  • URL rewriting via forward proxy

    - by Biggroover
    I have an app that runs inside my firewall and talks out to multiple end points via HTTP/HTTPS on a non-standard port e.g. http://endpoint1.domain.com:7171, http://endpoint2.domain.com:7171 What I want to do is route these requests through a forward proxy that then rewrites the URL to something like http://allendpoints.domain.com/endpoint1 (port 80 or 443) then on the other end have a reverse proxy that unwinds what I did on the forward proxy to reach the specific endpoints. The result being that I can route existing app requests through to specific endpoints across the internet without having to change my app software. My questions are: is this even possible? is it a good idea, are their better ways to do this? Can this be done with IIS and Apache as the proxies?

    Read the article

  • How to setup VPN as Proxy

    - by Nicolas Nox
    I have an PerfectPrivacy VPN connected via the OpenVPN-Network-Manger-Plugin (Ubuntu 12.04.1) and I want to assign a system wide proxy over that VPN. I have tried proxydriver that should do that automatically, but it works partially. The browser says that I have the IP of the VPN, but when I tried to send an eMail over SMTP (Port 25), I can´t connect to the mail server. In our company the smtp server port is closed, but that should be not a problem, when I do that over a VPN, shouldn´t it? greetings

    Read the article

  • Simple Hierarchical Clustering Implementations for C#?

    - by Joshua Smith
    I need a C# library that can do hierarchical single/complete link clustering. It's for a BSc final year project and I can't find any free implementations. I'd be happy to port a small(ish) Java project to C#, but most of the Java implementations are contained within huge libraries that have 30+ algorithms. The problem with large libraries is that one has to port 50% of the entire library due to dependency fanout. I'd be extremely grateful if anyone knows of any free single/complete link clustering implementations for C# or a small Java implementation of either! By the way, as I am a student, it may be possible to ask for an academic/research license from commercial companies.

    Read the article

  • To same computer Remote desktop thrue WRT54G router

    - by Kangarooo
    Can't access from my Same comp to same comp to test if all is ok. Tried all mentioned posibilities. Tryd my ip xxx.xxx.xxx.xxx / localhost with / without :5900 added with / without in "Remote desktop" checked "Configure network automatically to accept connection" with / without in router WRT54G enabled port 5900 forwardet to my comp 192.168.1.3 UPNP is enabled. I can connect to one other comp whitch isn't using router and checked "Configure network automatically to accept connection" and to one through TENDA W311R+ router where i've put port forwarding to 5900 and there works xxx.xxx.xxx.xxx:5900 What's wrong? What have i missed?

    Read the article

  • How do I configure multiple domain names on my IIS server? [closed]

    - by Dillie-O
    We have a few websites that we are running on one instance of IIS that need to be mapped for each of their domain names. For example. Site A has the domain name coolness.com Site B has the domain name 6to8Weeks.com Site C has the domain name PhatTech.com When I look at the "Web Site Identification" section of the IIS configuration window, I notice that I can specify an IP address and port, but if I click the Advanced button, I can also configure the site based on host header values as well. How do I configure each site in IIS? Ideally I would like them to all be able to listen to port 80, so I don't have weird URLs, but I'm not sure if I do this using headers, IP addresses, both, or something else.

    Read the article

  • How can I use a CanoScan N640Pex scanner over a USB/parallel cable?

    - by detly
    I have an old CanoScan N640Pex flat bed scanner and a USB-to-parallel port cable through which I can connect it to my PC. Unfortunately neither Simple Scan nor XSane detect the scanner. I'm running Ubuntu 12.04 (plus updates and backports) with kernel 3.2.0-31-generic. dmesg tells me this when I plus the cable in: [256411.641910] usb 7-1: new full-speed USB device number 10 using uhci_hcd [256411.872392] usblp0: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [256411.872417] usbcore: registered new interface driver usblp lsusb shows this device for my cable: Bus 007 Device 010: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port The device node created is /dev/usb/lp0 crw-rw---- 1 root lp 180, 0 Sep 9 17:46 /dev/usb/lp0 There is no extra information from any of these commands when I attach the scanner to the cable and power it on, though. I suspect I might need to change something in /etc/sane.d/canon_pp.conf, but I have no idea what to put for the ieee1284 line, since there is pretty much zero documentation for that parameter. So how can I get it to work?

    Read the article

  • Need to setup and access web disk for a hosting account

    - by mtk
    I am on linux(ubuntu 12.04) and have purchased a hosting space. In the cpanel, I selected nautilus for accessing web-disk and I was given a note: Note: In order for the Web Disk to work, you will need to allow port 2078 (SSL) or 2077 (non-SSL) on your computer's firewall. As, I am unable to connect to this, i.e. on entering the given url in Nautilus address bar, it says 'Connection closed'. So, I believe the above this quoted is not correctly configured. Please let me know, how to configure this? How to allow the given port access?

    Read the article

  • Adding a 'network' USB printer

    - by AndrewK
    I have a HP Deskjet 1050a printer, hence the 'network' in the title. Its a bog standard USB home printer. I have it attached to my router (has a USB port in it). I have got it connected and working to with Win8 PC and also a MacBook Air. Can't seem to get it to add as a printer to my Xubuntu laptop(s). It doesn't get detected automatically (not an actual network printer) and i've tried multiple options to get it working. It seems to add it but when printing a test page its saying the printer isn't connected. Ping works fine so it can see it, just can't add it as a printer. With Win8 I had to create a port with the IP of the printer (192.168.1.253 in this case), is there an Ubuntu alternative to do this?

    Read the article

  • How best to look up objects by label?

    - by dsollen
    I am writing the server backed by a pre-written API. I'm going to get a number of strings representing ports, signals, paths, etc etc etc. I need to look up the object associated with a given label, these objects are all in memory (no sql magic to do this for me). My question is, how best do I associate a given unique label with the mutable object it represents? I have enough objects that looking through every signal or every port to find the one that matches is possible, but may be slightly too slow. To be honest the direct 'look at every object' method is probably good enough for so small a body of objects and anything else is premature optimization, but I still am curious what the proper solution would be if I thought my signals were going to grow a bit larger. As I see it there are two options available. First would be to to create a 'store' that is a simple map between object and label. I could have it so that every time I call addObject the object is automatically saved into a hashmap or the like. This works, but relies on my properly adding and deleting each object so the map doesn't grow indefinitely. The biggest issue to me is that this involves having some hidden static map in my ModelObject class that just feels...wrong somehow. The other option is to have some method that can interpret the labels. All of these labels are derived from the underlying objects. So I can look at the signal label, for instance, and say "these 20 characters are the port" to figure out what port I need. This would allow me to quickly figure out what I need. However, if the label method is changed the translateLabelToObject method needs to be updated as well or everything breaks. Which solution is cleaner, or possibly a cleaner solution than either of above? For the record I'm working with sufficient number of variables to make direct comparison a little slow, but not enough to be concerned about memory overhead, written in java. All objects that have labels I need to look up extend the same parent class.

    Read the article

  • Problems in detecting pen drive

    - by Mzk
    First of all, I don't have an issue with detecting my pen drive on 32-bit ubuntu 12.04. It can detect my pen drive very fast when plug in. Then, I bought a laptop installed with windows 7 64-bit operating system. I have decided to installed ubuntu alongside with win7. To be precise, I installed uBuntu 12.04.3 64-bit. It appears that every time I plug in my pen drive, it is either very slow automatically mount. It is even worst that the pen drive won't mount when plug in to usb 3.0 port. Anyone? UPDATE: My laptop can detect pen drive now either 3.0 or 2.0 port. The question is why the pen drive very slow shows up?

    Read the article

  • How do I ensure all of the ports on my machine are open or reachable?

    - by Rev3rse
    I was testing port connectivity on my machine because WoW (which uses TCP ports 3724, 6112, and 6881-6999) couldn't connect to the Internet. So I downloaded PFPortChecker application and ran it using Wine (v1.3). After I tried to check every port, it seems like they're not reachable/closed. Why is that? My firewall is disabled so why is this happening? How can I open these ports and how can I see if these ports are opened or not? Also, how can I determine which application is using them?

    Read the article

  • Ubuntu 11.10 USB 3.0 HDD

    - by Chazm
    I have a problem with my external HDD (WD My Book Essential 1TB) working on USB 3.0 port. I'm using dual boot setup with Windows 7 and Ubuntu 11.10, both 64 bit. While I'm running Windows and rebooting back to Windows everything works well. When I'm switchin to ubuntu everything works great as well. But after 1st reboot from ubuntu neither windows nor ubuntu mount the external drive. I have to reboot the device manually. I suspect that the problem is with unmounting the device on shutdown on ubuntu. The case concern only usb 3.0. When i plug the same device into usb 2 port the problem doesn't persist. Does any1 hit the same problem or have a clue what might goin wrong?

    Read the article

  • Wifi problems with Ubuntu 13.10

    - by Sparrowhawk4
    I should probably say straight off that I am brand new to Ubuntu. I installed 13.10 alongside Windows 7 a couple of days ago and I've managed to clear up all the little problems, apart from with the wifi. My internet is fine using an ethernet cable. I can connect to the wifi, and it tells me that the signal is good, but for the vast majority of the time I can't load anything, and system monitor tells me that I am sending and receiving nothing. The problem is somewhere in Ubuntu. It works fine on Windows 7, my Android phone and all of my flatmates laptops. I know I'm not the only one with this problem, but the fixes I've seen either don't work or I don't understand them enough to carry them out. Help? EDIT: from lspci command as requested 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

    Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >