Search Results

Search found 2615 results on 105 pages for 'dell inspiron 1525'.

Page 12/105 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Dedicated GPU in Dell PowerEdge C1100

  - by Eli Gundry

  We recently purchased a Dell PowerEdge C1100 off lease with the initention of using it for graphics processing. We installed an AMD HD 7000 series GPU in it that runs off of board power and it sends video to the display. That said, the video is very choppy, leading us to belive that the onboard video is doing all the processing and sending it to the card. Is there any way to either disable the VGA on this server or tell the OS to only use the dedicated card. More info: The server is running REHL 6.4 The graphics running the proprietary AMD drivers The video card only works in OS and does not show the BIOS on boot (we know that it's impossible to change this) Any ideas, guys? Update We are now thinking that the GPU is doing the graphics processing, but not working at the full speed of the PCI bus. Which is odd, because it is an x16 slot, but probably optimized to use a RAID card (if that makes any sense). Is there any way to remedy the choppy graphics on this server?

  Read the article

• off-the-shelf HDD in Dell Optiplex 755 - Invalid Replacement - Press F1 when rebooting

  - by Eric Liprandi

  I recently put an SSD into my work Optiplex 755. Since then, every time the system boots or reboots, I get prompted to hit F1 to continue with a message like HDD replacement is not valid. The system works just fine. What I am gathering from Dell's website is that I left the original drive internally as a data drive. And apparently the Optiplex does not support 2 drives in the configuration we purchased originally and complains. Any suggestions on how to get rid of this message? some suggested the MEBx or whatever from Intel and to turn it off, but I did not succeed earlier. It's not a big deal 80% of the time, but I regularly work from home and occasionally need to fire a reboot and well, you don't get the BIOS screen remotely :) Regards, Eric.

  Read the article

• Dell SC1435 always requires F1 at boot

  - by David Mackintosh

  I have a Dell PowerEdge SC1435 that has come back after doing duty at a partner site. I am trying to configure it for local use. The only problem I have with it is that every time it boots it always requres a manual F1 press after the POST sequence. The last thing it does is give me the opportunity to configure the BMC, and then it says: Press F1 to continue or press F2 for Setup It will wait there forever (well, at least an hour). Pressing F1 starts the OS booting. I can't see the setting in the BIOS which controls this and I can't find it in the documentation. What am I missing?

  Read the article

• Dell Dimension 2400 problem

  - by murgatroid99

  I have a new problem with a Dell Dimension 2400 PC. Until yesterday or the day before, it was working fine, but today when I press the power button the light on the power button turns yellow instead of green, the fan behind the processor increases speed until it sounds like a jet engine, and the computer does not boot up. I cleaned out the dust in the computer so that is not the problem. Also, the fan was blowing cold air. Do any of you know what might be causing this and how I might be able to fix it?

  Read the article

• Very slow disk performance on Dell PowerEdge 2950 w/ PERC 6/i running RAID 10

  - by vocoder

  I recently set up a server running Ubuntu 10.04 LTS on a Dell PowerEdge 2950 server - it has 6 500 gb 7200RPM SATA drives setup in a RAID 10 config. I am seeing extremely poor disk performance - the RAID array reports all disks are normal and using MegaCLI, it looks like the BBU is fine. hdparm -tT /dev/sda reports: Timing cached reads: 90 MB in 2.05 seconds = 43.96 MB/sec Timing buffered disk reads: 24 MB in 3.11 seconds = 7.72 MB/sec So as you can see, it takes forever to something as simple as an apt-get upgrade and even logging into the server. How do I go about troubleshooting what is causing this? I upgraded the firmware on the PERC 6i RAID controller to the latest, but didn't see any improvements.

  Read the article

• Getting packets from one port to another on a Dell PowerConnect 2824 switch

  - by Arvo Bowen

  I have a dell PowerConnect 2824 and I have a cat 5 cable connected from port 1 to port 23. Port 1 is reserved for VLAN 1 (the only VLAN that can manage the switch) and port 18-23 belong to VLAN 112. I currently have the switch setup with ip 10.71.3.5/27 and a test machine plugged into port 22 with IP address 10.71.3.30/27. For some reason I can not ping 10.71.3.5 from my test machine (10.71.3.30). Note: When I try to ping the server plugged into port 21 (IP: 10.71.3.7/27) also VLAN 112, I get responses just fine. Note: When I plug my test machine directly into port 1, I can ping 10.71.3.5 just fine. Quick Recap: Switch IP: 10.71.3.5 Port 1 - dedicated to management - (VLAN1) Port 21 - SERVER (10.71.3.7/27) - (VLAN112) Port 22 - test machine (10.71.3.30/27) - (VLAN112) Port 23 - dedicated to management (to hop over to VLAN 1 from VLAN 112) - (VLAN112)

  Read the article

• How to set up Dell OMSA tools on Debian 6 (Squeeze) (PE2950)

  - by javano

  I assume I have set up them up incorrectly or am missing a library or dependency. When I log into the OMSA web interface I can't see anything Also, omreport tells me nothing; root@box:~# omreport storage controller No controllers found I assume these two will use the same source of information so what ever is wrong will fix them both. I set up OMSA as per these instructions. Also I have compiled MegaCLI (as this is a PowerEdge 2950 with a Perc 6/i controller) and I have used that to update the RAID firmware, so that works, but the Dell tools aren't. What have I missed during set up? root@kvm1:~# cat /etc/issue Debian GNU/Linux 6.0 \n \l root@kvm1:~# uname -a Linux kvm1.mivoice.cust.vostron.net 3.4.9 #1 SMP Wed Aug 22 19:08:46 BST 2012 x86_64 GNU/Linux

  Read the article

• Removing RAID on a DELL power-edge server

  - by Simon Callan

  We have a Dell Power-edge T110 server, with either a PERC S100 or S300 raid controller (I suspect S100), and 2 x 500GB SATA hard discs. These discs are running in RAID-1 configuration, (either 1 or 2 virtual discs), and on top of this, we have the C and D drives. As we are running low on disc space, we are looking at dropping the RAID to get some disc space back. Is it possible to split the discs back into 2 seperate hards discs that the OS can see, without losing all the data on the drives? Even better, would it be possible to split the D: drive, leaving the OS C: drive in RAID1 configuration?

  Read the article

• Dell poweredge 1850's - wont install os

  - by user1326789

  I have 3 of these dell 1850 rack servers. 1 has 3GB RAM and 2 73GB HDD's. 2 have 6GB RAM and each of them has 2 73GB HDD's. I am currently trying to install an os on them but when i boot with windows xp setup, it gives me an error saying no partition found. Now i have set these drives up in RAID on the server and i put them "online" so it should be working fine but they're not. Please assist me in installing an operating system on these, i have no clue as to if it's the BIOS or the RAID controller within it. Thanks in advance, -Matt.

  Read the article

• Installing W2K8 R2 on a Dell Poweredge 2850

  - by DerekT

  I'm a server novice and have been given a Dell 2850 (PERC 4e/Di). It has 3 blank HDs that I think are configured as RAID 5. I am trying to install W2K8 R2 SP1 on it. It doesn't have a DVD reader so I created an install USB. This works fine until it's time to copy files to the HD. It can't see a HD. There is an option to browse for drivers at this stage. Any idea what drivers I need and where to download them? I downloaded this driver RAID_DRVR_WIN_R227150.EXE but this failed with invalid signature. Thanks to dyasny for the link to LSI-LOGIC_MULTI-DEVICE_A00_R227150.exe.

  Read the article

• Dell U271 monitor DisplayPort suddenly not working

  - by Amir Latif

  My new(ish) Dell U271 took a bit of a knock and it now suddenly doesn't recognise the Macbook plugged into it via DisplayPort - this had been working great for several months up until now. When I "Scan Sources", it doesn't find anything on DisplayPort. However, one suspicious behaviour leads me to think all might not be lost. When the Mac is woken from sleep, this used to kick the monitor in (as an monitor would) and while it no longer does that, the light on the monitor does go from standby orange to blue briefly, then the monitor says it's going into "power save" mode. It seems like it gets some kinda signal. Any ideas on how I can diagnose the problem? I'm trying to find another mac but no one near me has one ...

  Read the article

• Dell 620 display is too bright to use

  - by keith

  I have a Dell D620 with a display problem. In windows 7 the display seems to be too bright, the text is broken up, the only way to see the mouse is at a very oblique angle. Changing the brightness with fn and brightness control has little/no effect. When I put it in high contrast mode I can see all the colors, but any windows pictures etc are still useless. I cannot get it to connect to an external monitor via VGA port or via a USB-VGA connector.

  Read the article

• dell vostro 1310 with nVidia 8400M display problem

  - by Arthur

  Hi everyone, i hope someone can help me with this problem. I have a Dell vostro 1310 Laptop with 32 bit vista and a 8400M nVidia chip. Recently i have noticed performance issues when my girlfriend was playing Sims 3, and then one day i turned it on and all i got was a thick white line at the bottom of the screen. i heard the OS start up so automatically i thought it was a damaged screen, but i had doubts so i plugged it into an external display via the vga port. it worked but everything appart worm the OS choice menu looks distorted beyond belief. even the bios screen had multicoloured lines running down the screen. The resolution is non existant, the screen only shows a 256 colour pallette and is heavily distorted. i barely managed to get to the device manager where i found the gfx card with an exclamation mark. does anybody have suggestions? should i buy a new mobo or are repairs possible? thanks in advance

  Read the article

• Dell EqualLogic vs. EMC VNXe [closed]

  - by Untalented

  We've been looking into SMB SANs and based on the competitive pricing I've been getting we're really liking these two array's. There are some pro's to both solutions, but I've unable to really decide which to choose. The EMC offers better expandability since you can buy an additional shelf (roughly $1200) and can add drives then to the array. However, the Dell unit is still very nice. Can anyone comment on their experiences with the two and thoughts on this? Also, to get the VMware Storage API support you need VMware Enterprise. How much additional performance does this provide? It's roughly $15k more than the Essentials Plus bundle we're looking at (this is a small environment [3 Hosts 1 Array].

  Read the article

• Dell Studio XPS 16 Runs Hot

  - by dtbarne

  Specs: 1920x1080 i7 1.6 GHz quad core 6GB RAM 1GB ATI Radeon HD 6570M/5700 Series 500GB 7200rpm Hard Drive Love this laptop for many reasons, but it constantly runs hot (CPU is low 70s with basic tasks and often 80+ is not uncommon) and I'm finding it too much to deal with. The laptop feels very hot (almost too hot for a lap) and often gets so hot that the OS slows down or freezes altogether. I've tried cleaning it out and even replacing the thermal paste. I often use an external cooler, but it only helps 3-5 degrees and it's a pain to have to use. I've come to the conclusion that it just runs hot. I have two questions: What is to blame? The i7 processor, the gfx card, or is it just that this laptop has poor cooling? Does the Dell XPS 15 run cooler? I'm looking at replacing my current laptop, but I don't want to run into the same problem.

  Read the article

• Dell docking station / Windows 7 not detecting HannsG JC199D via DVI

  - by user27150

  I have a laptop running Win7 that I use with a Dell docking station. I'd used it with XP for a couple years running dual monitors from the docking station, one from the VGA and one from the DVI. After upgrading to Win7, the monitor that's on the DVI out is not detected, using "rigorous detection" or otherwise. I've switched the cables to verify that it's not the monitor at fault-- but I can't find any info on why the monitor wouldn't be detected. I've got the latest and greatest Nvidia drivers installed (at least, as far as Windows update is aware). Leaving the laptop lid partly open does allow Windows to detect the laptop's native screen as well as the VGA monitor, but never the DVI. The monitors are HannsG JC199Ds. Any ideas? Thanks!

  Read the article

• Remote RAID Control in ESXi on a Dell PowerEdge 2950 Using OpenManage

  - by yoyomommy

  I was wondering how one can add a drive into an existing RAID array while ESXi is still running. I have read that you are able to use Dell OpenManage to do this. I have installed OMSA 7.0 on the VMWare ESXi host (5.0 and fully updated) and I've installed OpenManage Essentials on a Windows Server 2008 R2 guest. The issue that I'm having is that OpenManage is unable to see my RAID controller. I have seen videos and photos as parts of guides on how to do this online, so I would assume that the functionality exists and I just have it set up wrong.

  Read the article

• Connect Lenovo Thinkpad Edge e120 to WQHD display (such as Dell U2711) through HDMI

  - by Fulvio

  On paper, the HDMI version of the Lenovo Thinkpad Edge e120 is 1.3, which supports WQHD. Does it actually work? I want to connect the e120 to a WQHD display, such as the Dell U2711 or an Apple Cinema Display. I run Windows 7 Ultimate and latest drivers. The e120 I think has the Intel HD Graphics 3000 onboard chipset. I don't have the chance to test out the e120 with neither of these displays, so I'm seeking for an opinion from those who have tried. Thank you

  Read the article

• Dell XPS 710 - Boot Device Not Available

  - by WilliamKF

  Recently I was gifted a Dell XPS 710 tower running WinXP SP3. It was running fine until today when I restarted and received a blue screen and the error "unmountable boot volume". In order to fix this issue I've attempted to boot from the Windows XP CD and run chkdsk. However when I attempt to boot from the CD drive I get a "Boot Device not Available" error. Next I made a bootable USB flash drive, but receive the same error as the CD drive. The BIOS recognizes the CD and flash drives, and they appear in the boot device list, but neither will boot. I've attempted to resolve this by re-arranging the boot order in the BIOS and switching IDE channels/setting jumpers on the drives themselves, to no effect. I cannot move the hard drive to another machine because the XPS is the only one that supports SATA drives.

  Read the article

• Is Lojack preinstalled on Dell's laptops?

  - by Blorgbeard

  I'm looking at buying a Dell Studio 15 or similar. Unfortunately, they all seem to come with Lojack software included and no option to take it out of the build. I really do not want this software installed on my laptop. It sounds really abusable, and hard to get rid of once installed - it hides in your BIOS and survives reinstalls, etc. Does anyone know whether Lojack comes preinstalled on this machine, or if they just ship you a disc, which could subsequently be broken in half and/or microwaved into submission?

  Read the article

• Configuring NVIDIA Quadro with Dell Precision M4600

  - by vsecades

  After a frustrating couple of weeks when I recently bought my Dell Precision laptop, I managed to fix an issue where Ubuntu (yes, was NOT using Windows, get serious) would not recognize the video card and would cause all sorts of problems all over the place. I ended up one Saturday morning nearly throwing this thing away, when I managed to find a post about NVIDIA Optimus technology... ( http://www.pcmag.com/article2/0,2817,2358963,00.asp ). Now I am a huge advocate of disruptive new stuff, as long as we keep the broader audience in mind. Anyhow, disabling this (which as the BIOS settings state only work on Windows 7 or later), effectively allow the NVIDIA based Ubuntu driver to kick in full force. No need for a trash can anymore thankfully. As I saw multiple posts all over the place about this, check your BIOS, disable and try the video again to see if this corrects your issues. Best of luck!

  Read the article

• Dell Vostro 1510 slow boot

  - by pkswatch

  I have an old Dell Vostro 1510 with Ubuntu and Windows 7 on it. When it is switched on, it shows the following message: NO TPM OR TPM HAS ERROR SYSTEM BIOS SHADOWED VIDEO BIOS SHADOWED Then it waits on the same screen for about 70-80 seconds before showing up the grub. I read about tpm problems but did not get anything about shadowed problems. So my guess is tpm isn't the reason for this slow booting (am I right?) But then what is it exactly? Please help..

  Read the article

• Dell D630 - Touchpad does not move the mouse cursor

  - by Dean McKenzie

  Windows XP - Dell D630 - Synaptics Touch Pad driver installed. The system tray icon that shows the movement of your finger on the touchpad registeres movement. The scroll feature of the touchpad works on any window with a scroll bar. The double click works even. But it never actually moves the cursor on the screen. An external mouse works with out problems, and I've replaced the palm-rest/touchpad and it continues to happen. The touch stick in the middle of the keyboard works without problems. Does anyone have any ideas?

  Read the article

• dell studio 1558 multi touchpad multi finger problem

  - by christian130

  Recently I bought an Intel Core i7 Dell laptop fully integrated. I have an ATi Radeon 1 gb ram graphic card and so on. Everything works fine even the brightness, but when I try the multi touch multi finger(touchpad which enables two or more finger) the pointer jump and go there and go here and so It's very annoying because when I'm trying to write this question I cannot let the pointer be cool! when I accidentally the touchpad it is very annoying. How can I fix this ?

  Read the article

• iPad USB Charging Utility for Dell Optiplex

  - by BreakPhreak

  As you probably know already, an iPad requires a certain power on USB port to be charged from. Thus, some motherboard manufacturers (such as ASUS, Gigabyte etc) had released a special driver that recognizes that an iPad is connected to the port and adjust the USB power accordingly. On one of my computers (Gigabyte motherboard) it works fine. But other one is Dell Optiplex 780 and the regular googling by "<motherboard type> + iPad charging" doesn't seem to bring encouraging results. Just for completeness: no, the iPad is not being charged without any special driver installed (out of the box) either. Any suggestions will be welcomed.

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >