Search Results

Search found 13608 results on 545 pages for 'performance dashboard'.

Page 12/545 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Benchmarking a file server

  - by Joel Coel

  I'm working on building a new file server... a simple Windows Server box with a few terabytes of disk space to share on the LAN. Pain for current hard drive prices aside :( -- I would like to get some benchmarks for this device under load compared to our old server. The old server was installed in 2005 and had 5 136GB 10K disks in RAID 5. The new server has 8 1TB disks in two RAID 10 volumes (plus a hot spare for each volume), but they're only 7.2K rpm, and of course with a much larger cache size. I'd like to get an idea of the performance expectations of the new server relative to the old. Where do I get started? I'd like to know both raw potential under different kinds of load for each server, as well an idea of what our real-world load looks like and how it will translate. Will disk load even matter, or will performance be more driven by the network connection? I could probably fumble through some disk i/o and wait counters in performance monitor, but I don't really know what to look for, which counters to watch, or for how long and when. FWIW, I'm expecting a nice improvement because of the benefits of having two different volumes and the better RAID 10 performance vs RAID 5, in spite of using slower disks... but I'd like to get an idea of how much.

  Read the article

• How can dev teams prevent slow performance in consumer apps?

  - by Crashworks

  When I previously asked what's responsible for slow software, a few answers I've received suggested it was a social and management problem: This isn't a technical problem, it's a marketing and management problem.... Utimately, the product mangers are responsible to write the specs for what the user is supposed to get. Lots of things can go wrong: The product manager fails to put button response in the spec ... The QA folks do a mediocre job of testing against the spec ... if the product management and QA staff are all asleep at the wheel, we programmers can't make up for that. —Bob Murphy People work on good-size apps. As they work, performance problems creep in, just like bugs. The difference is - bugs are "bad" - they cry out "find me, and fix me". Performance problems just sit there and get worse. Programmers often think "Well, my code wouldn't have a performance problem. Rather, management needs to buy me a newer/bigger/faster machine." The fact is, if developers periodically just hunt for performance problems (which is actually very easy) they could simply clean them out. —Mike Dunlavey So, if this is a social problem, what social mechanisms can an organization put into place to avoid shipping slow software to its customers?

  Read the article

• Openfiler iSCSI performance

  - by Justin

  Hoping someone can point me in the right direction with some iSCSI performance issues I'm having. I'm running Openfiler 2.99 on an older ProLiant DL360 G5. Dual Xeon processor, 6GB ECC RAM, Intel Gigabit Server NIC, SAS controller with and 3 10K SAS drives in a RAID 5. When I run a simple write test from the box directly the performance is very good: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 4.64468 s, 226 MB/s So I created a LUN, attached it to another box I have running ESXi 5.1 (Core i7 2600k, 16GB RAM, Intel Gigabit Server NIC) and created a new datastore. Once I created the datastore I was able to create and start a VM running CentOS with 2GB of RAM and 16GB of disk space. The OS installed fine and I'm able to use it but when I ran the same test inside the VM I get dramatically different results: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 26.8786 s, 39.0 MB/s [root@localhost ~]# Both servers have brand new Intel Server NIC's and I have Jumbo Frames enabled on the switch, the openfiler box as well as the VMKernel adapter on the ESXi box. I can confirm this is set up properly by using the vmkping command from the ESXi host: ~ # vmkping 10.0.0.1 -s 9000 PING 10.0.0.1 (10.0.0.1): 9000 data bytes 9008 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=0.533 ms 9008 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.736 ms 9008 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=0.570 ms The only thing I haven't tried as far as networking goes is bonding two interfaces together. I'm open to trying that down the road but for now I am trying to keep things simple. I know this is a pretty modest setup and I'm not expecting top notch performance but I would like to see 90-100MB/s. Any ideas?

  Read the article

• Terminal server performance over high latency links

  - by holz

  Our datacenter and head office is currently in Brisbane, Australia, and we have a branch office in the UK. We have a private WAN with a 768k link to our UK office and the latency is at about 350ms. The terminal server performance is reeeeealy bad. Applications that don't have too much animation or any images seem to be okay. But as soon as they do, the session is almost unusable. Powerpoint and internet explorer are good examples of apps that make it run slow. And if there is an image in your email signature, outlook will hang for about 10 seconds each time a new line is inserted, while the image gets moved down a few pixels. We are currently running server 2003. I have tried Server 2008 R2 RDS, and also a third party solution called Blaze by a company called Ericom, but it is still not too much better. We currently have a 5 levels dynamic class of service with the priority in the following order. VoIP Video Terminal Services Printing Everything else When testing the terminal server performance, the link monitored using net-flows, and have plenty we of bandwidth available, so I believe that it is a latency issue rather than bandwidth. Is there anything that can be done to improve performance. Would citrix help at all?

  Read the article

• mysql medium int vs. int performance?

  - by aviv

  Hi, I have a simple users table, i guess the maximum users i am going to have is 300,000. Currently i am using: CREATE TABLE users ( id INT UNSIGEND AUTOINCEREMENT PRIMARY KEY, .... Of course i have many other tables that the users(id) is a FOREIGN KEY in them. I read that since the id is not going to use the full maximum of INT it is better to use: MEDIUMINT and it will give better performance. Is it true? (I am using mysql on Windows Server 2008) Thanks.

  Read the article

• Performance monitoring on Linux/Unix

  - by ervingsb

  I run a few Windows servers and (Debian and Ubuntu) Linux and AIX servers. I would like to continously monitor performance on these systems in order to easily identify bottlenecks as well as to have an overview of the general activity on the servers. On Windows, I use Windows Performance Monitor (perfmon) for this. I set up these counters: For bottlenecks: Processor utilization : System\Processor Queue Length Memory utilization : Memory\Pages Input/Sec Disk Utilization : PhysicalDisk\Current Disk Queue Length\driveletter Network problems: Network Interface\Output Queue Length\nic name For general activity: Processor utilization : Processor\% Processor Time_Total Memory utilization : Process\Working Set_Total (or per specific process) Memory utilization : Memory\Available MBytes Disk Utilization : PhysicalDisk\Bytes/sec_Total (or per process) Network Utilization : Network Interface\Bytes Total/Sec\nic name (More information on the choice of these counters on: http://itcookbook.net/blog/windows-perfmon-top-ten-counters ) This works really well. It allows me to look in one place and identify most common bottlenecks. So my question is, how can I do something equivalent (or just very similar) on Linux servers? I have looked a bit on nmon (http://www.ibm.com/developerworks/aix/library/au-analyze_aix/) which is a free performance monitoring tool developed for AIX but also availble for Linux. However, I am not sure if nmon allows me to set up the above counters. Maybe it is because Linux and AIX does not allow monitoring these exact same measures. Is so, which ones should I choose and why? If nmon is not the tool to use for this, then what do you recommend?

  Read the article

• SQL Server: One 12-drive RAID-10 array or 2 arrays of 8-drives and 4-drives

  - by ben

  Setting up a box for SQL Server 2008, which would give the best performance (heavy OLTP)? The more drives in a RAID-10 array the better performance, but will losing 4 drives to dedicate them to the transaction logs give us more performance. 12-drives in RAID-10 plus one hot spare. OR 8-drives in RAID-10 for database and 4-drives RAID-10 for transaction logs plus 2 hot spares (one for each array). We have 14-drive slots to work with and it's an older PowerVault that doesn't support global hot spares.

  Read the article

• Read only array, deep copy or retrieve copies one by one? (Performance and Memory)

  - by Arthur Wulf White

  In a garbage collection based system, what is the most effective way to handle a read only array if such a structure does not exist natively in the language. Is it better to return a copy of an array or allow other classes to retrieve copies of the objects stored in the array one by one? @JustinSkiles: It is not very broad. It is performance related and can actually be answered specifically for two general cases. You only need very few items: in this situation it's more effective to retrieve copies of the objects one by one. You wish to iterate over 30% or more objects. In this cases it is superior to retrieve all the array at once. This saves on functions calls. Function calls are very expansive when compared to reading directly from an array. A good specific answer could include performance, reading from an array and reading indirectly through a function. It is a simple performance related question.

  Read the article

• Performance monitor visualization tool

  - by MK

  I'm looking for a tool to display data from performance monitor counters. I'm looking for something that would be visually appealing (look like a dashboard) and it should be able to aggregate (sum up) over multiple counters. No thresholds/alarming needed, we are using Nagios for that.

  Read the article

• Performance problems when running Java desktop applications on Citrix Metaframe

  - by demetriusnunes

  We have a desktop Java application running within a Citrix Metaframe server farm and the performance, specially while starting up the app, is very unreliable. Sometimes it takes 15 seconds and sometimes it takes over a minute. It's really unpredicatable. Is there any way to optimize running Java desktop applications within Citrix Metaframe Terminal server sessions to a more reliable performance level? Are there any optimization directed specifically toward Java, such as pre-load JVMs or something like that? Any help would be greatly appreciated.

  Read the article

• Need help diagnosing network performance issues

  - by tokes

  I am currently working in a developing country as a system analyst for a government department. My area of expertise is software projects, but I've come across a few issues with the network setup in my office. (Unfortunately, being a developing country, there's not a lot of professional help available for this sort of thing.) Most recently, I am trying to diagnose a problem with slowness on the network. Our office is connected to the internet via an ADSL wireless modem/router (called Router). The modem is connected via ethernet to a switch (called Switch). The modem also acts as a wireless access point (called Wireless1), though because it is in a room at the end of the floor, it's range is limited. There are ethernet ports installed around the office. The cables of these all lead back to the same switch. In closer vicinity to the bulk of the client computers, there is another wireless router that acts as an access point for those clients (called Wireless2). That router is connected via ethernet to a wall port, and therefore to Switch. There is also a Windows server which acts as a DNS server (called DNSBox) which is located in the same room and is connected directly to Switch. ---Internet----------| Router/Wireless1 192.168.10.1 ---------------| |----|=========| DNSBox | |-------------------- 192.168.10.4 --------------------| Switch |---Other clients---- | |-------------------- |----|=========| Wireless2 ------------------| 192.168.10.198 One final thing to mention about the network setup. All clients are configured with manual IP addresses. Their router/gateway is set to the IP address of Router, and their DNS server is set to the IP address of DNSBox (with a secondary IP set to an external IP - that of our ISP's DNS server). Here are the symptoms we are experiencing: Clients connected to Wireless2 AP experience slow and unstable connections to the internet. (Slow here is defined as speeds of ~1KB/s, though ping response times seem to be as normal.) Clients connected via ethernet to Switch also experience the same slowness. Clients connected to Wireless1 AP (i.e. connecting via wireless directly to the ADSL modem) experience normal connections to the internet. Clients connected via ethernet to Router (i.e. connecting via ethernet directly to the ADSL modem) also experience normal connections to the internet. I also tried to gauge the connection performance between two machines on the network via ethernet: A file transfer between two clients who were both directly connected to Switch was the fastest; A file transfer between one client directly connected to Switch, and one client directly connected to Router (which is directly connected to Switch) performed much slower; A file transfer between two clients directly connected to Router also performed slowly. Things I have attempted to diagnose the problem: Restarted Switch -- no change. We tried unplugging ethernet jacks from Switch 4 at a time and testing the internet connection. The thought here was that perhaps a client on the network has contracted a virus, and is possibly spamming the network with traffic? (Not very technical, I know.) Unfortunately we couldn't get any significant increases in performance using this method. There were a couple of times when it seemed to be better, but then the connection speed quickly dropped back to slow/dead pace. I didn't want to unplug all jacks from Switch because I was concerned that users might be affected or that I would re-plug in the jacks incorrectly (should I even be worried about that? a port is a port on a switch, right?) I tried swapping the ethernet cable used to connect Router to Switch -- no change in performance. I tried swapping the port used on Switch for Router -- no change in performance. Anyone got any ideas on what this could be? Should I be mentioning specific brand names/models of the hardware used? Virii outbreaks are common in this country/office -- what could I be doing to figure out if a virus is at fault? If it is a virus, it doesn't seem to be generating a lot of traffic to/from the internet, because a) I can still get a good speed if I am directly connected to Router / Wireless1 and b) our ISP data usage has not risen suspiciously. Thanks for your help! Update #1 Here are the specs of some of the hardware: Switch is an Edimax ES3132RL 32-Port 10/100 Rackmount Switch Router is a D-Link DSL-G604T Update #2 I just tried unplugging everything except a laptop and Router from Switch. Speeds are still slow. I guess that means that Router / Switch are not being flooded? It seems more and more likely that the cause is something to do with the interaction between Router and Switch. However, I still can't find any useful resources on setting the LAN speed for either (and I'm not well-versed in these advanced networking configurations).

  Read the article

• Slow performance by PHP directory operations on virtual machine (Ubuntu libvirt)

  - by thonixx

  Some days ago I installed an Ubuntu server and two running virtual machines with libvirt. Everything works fine except one performance problem. Everytime when I call a PHP script with directory operations the operations are very slow and not performant. Here is an example: http://zother.white-tiger.ch/ And here you see an example without a directory operation and how fast it is: http://michaeltanner.ch/ It's all on the same virtual server. The virtual machine uses 6 cores (8 are available) and 7500 megabytes RAM (8 Gigabyte are available). The disk image format is qcow2. How can I improve the performance?

  Read the article

• Performance Alert Writing to event Log but not running program

  - by TooFat

  I followed the instructions here How to create and configure performance alerts in Windows Server 2003 to set up an alert if the available logical disk space on one of my drives goes below a certain number. I selected the option to write to the application event log and select the "run this program" option and put in the path to a script that sends me an email. If I copy the path to the script and run it everything works and I get the email. When I start the alert I can see that the limit I set is being exceeded and the logs are being written to the application log, but the email is never being sent. I have the runas user and pword set to a Domain Admin. If I make the "run this program path" to C:\Windows\System32\calc.exe" it also doesn't start up the calculator. The Performance Logs and alerts services is running as Local Admin with allow to interact with desktop. What am I doing wrong?

  Read the article

• How to troubleshoot performance issues of PHP, MySQL and generic I/O

  - by jbx

  I have a WordPress based website running on a shared hosting. Its response time is very decent (around 2s to retrieve the HTML page and 5s to load all the resources). I was planning to move it to a dedicated virtual server (Ubuntu 12.04 LTS), which should theoretically improve things and make them more consistent given its not shared. However I observed severe performance degredation, with the page taking 10seconds to be generated. I ruled out network issues by editing /etc/hosts on the server and mapping the domain to 127.0.0.1. I used the Apache load tester ab to get the HTML, so JS, CSS and images are all excluded. It still took 10 seconds. I have Zpanel installed on the server which also uses MySQL, and its pages come up quite fast (1.5s) and also phpMyAdmin. Performing some queries on the wordpress database directly through phpMyAdmin returns them quite fast too, with query times in the 10 to 30 millisecond region. Memory is also sufficient, with only 800Mb being used of the 1Gb physical memory available, so it doesn't seem to be a swap issue either. I have also installed APC to try to improve the PHP performance, but it didn't have any effect. What else should I look for? What could be causing this degradation in performance? Could it be some kind of I/O issue since I am running on a cloud based virtual server? I wish to be able to raise the issue with my provider but without showing actual data from some diagnosis I am afraid he will just blame my application. UPDATE with sar output (every second) when I did an HTTP request: 02:31:29 CPU %user %nice %system %iowait %steal %idle 02:31:30 all 0.00 0.00 0.00 0.00 0.00 100.00 02:31:31 all 2.22 0.00 2.22 0.00 0.00 95.56 02:31:32 all 41.67 0.00 6.25 0.00 2.08 50.00 02:31:33 all 86.36 0.00 13.64 0.00 0.00 0.00 02:31:34 all 75.00 0.00 25.00 0.00 0.00 0.00 02:31:35 all 93.18 0.00 6.82 0.00 0.00 0.00 02:31:36 all 90.70 0.00 9.30 0.00 0.00 0.00 02:31:37 all 71.05 0.00 0.00 0.00 0.00 28.95 02:31:38 all 14.89 0.00 10.64 0.00 2.13 72.34 02:31:39 all 2.56 0.00 0.00 0.00 0.00 97.44 02:31:40 all 0.00 0.00 0.00 0.00 0.00 100.00 02:31:41 all 0.00 0.00 0.00 0.00 0.00 100.00 My suspicion that this comes from I/O related issue is also because a caching plugin I use to reduce the amount of queries to the database, by precompiling PHP pages is actually making things worse instead of better. It seems that file access is making things worse instead.

  Read the article

• VMWare Workstation Performance

  - by tekiegreg

  Hi there, awhile ago I upgraded my laptop to Windows 7 x64 from Windows XP 32 bit edition. However not before virtualizing the physical installation and I continue to run it under VMWare Workstation today. The performance on the resulting VM is just absolutely atrocious! I've done a lot of uninstalling stuff that's not longer needed since the machine is virtual in an effort to reduce RAM, but in general the responsiveness seems sluggish. I also run the Virtual Machine on it's own separate HD that is seldom used by the host OS. I'm just hoping for some general tips in increasing VMWare performance anywhere, thoughts? EDIT: Both of the below answers were excellent starting points for me. However I did like the selected answer's strategies on disk management. I am running the Virtual Machine in a separate external hard disk, likely I'm going to have to reconfigure somehow. Thanks all!

  Read the article

• Optimizing PHP<>MySQL performance

  - by BarsMonster

  I am trying to optimize my PHP<MySQL on this test script: <? for($i=0;$i<100;$i++)//Itterations count $res.= var_dump(loadRow("select body_ru from articles where id>$i*50 limit 100")); print_r($res); ?> I have APC, and article table have an index on id. Also, all these queries are hitting query cache, so sole MySQL performance if great. But when I am using ab -c 10 -t 10 to bench this scipt, I am getting: 100 itterations: ~100req/sec (~10'000 MySQL queries per second) 5 itteration: ~200req/sec 1 itteration: ~380req/sec 0 itteration: ~580req/sec I've tried to disable persistent connections in PHP - it made it slower a bit. So, how can I make it work faster, provided that MySQL is not limiting performance here?

  Read the article

• Performance affects of compressing Program Files on Windows / NTFS

  - by SRobertJames

  What are the performance affects of compressing Program Files on Windows NTFS? On a fast, multicore machine, the overhead of decompression is minimal. Machines are generally disk bound, and if you can reduce the disk load by compression, you often speed things up. (Microsoft says that the built in compression of Windows Search indexes actually improves speed for this reason.) On the other hand, Windows' virtual memory is complicated. Perhaps if files are compressed, they can't be paged out simply. And there may be other issues. In short: On a fast, multicore machine with a relatively slow disk, what performance affects will compressing Program Files have?

  Read the article

• Skyrim: Heavy Performance Issues after a couple of location changes

  - by Derija

  Okay, I've tried different solutions: ENB Series, removing certain mods, checking my FPS Rate, monitoring my resources, .ini tweaks. It's all just fine, I don't see what I'm missing. A couple of days ago, I bought Skyrim. Before I bought the game, I admit I had a pirated copy because my girlfriend actually wanted to buy me the game as a present, then said she didn't have enough money. Sick of waiting, I decided to buy the game by myself. The ridiculous part is, it worked better cracked than it does now uncracked. As the title suggests, after entering and leaving houses a couple of times, my performance obviously drops extremely. My build is just fine, Intel i5 quad core processor, NVIDIA GTX 560 Ti from Gigabyte, actually stock-OC, but manually downclocked to usual settings using appropriate Gigabyte software. This fixed the CTD issues I had before with both Skyrim and BF3. I have 4GB RAM. A website about Game Tweaks suggested that my HDD may be too slow. A screenshot of a Windows Performance Index sample with the subscription "This is likely to cause issues" showed the HDD with a performance index of 5.9, the exact same mine has, so I was playing with the thought to purchase an SSD instead, load games onto it that really need it like Skyrim, and hope it'd do the trick. Unfortunately, SSDs are likewise expensive, compared to "normal" HDDs... I'm really getting desperate about it. My save is gone because the patches made it impossible to load saves of the unpatched version and I already saved more than 80 times despite being only level 8, just because every time I interact with a door leading me to another location I'm scared the game will drop again. I can't even play for 30 mins straight anymore, it's just no fun at all. I've researched for a couple of days before I decided to post my question here. Any help is appreciated, I don't want to regret having bought the game... Since it actually is the best game I've played possibly for ever. Sincerely. P.S.: I don't think it's necessary to say, but still, of course I'm playing on PC. P.P.S.: After monitoring both my PC resources including CPU usage and HDD usage as well as the GPU usage, I don't see any changes even after the said event. P.P.P.S.: Original question posted here where I've been advised to ask here.

  Read the article

• Good book for building high performance web sites?

  - by Arne Evertsson

  Any recommendations for a book about building and running high performance, high-availability web sites on Linux?

  Read the article

• Tips to increase performance of a Windows computer

  - by Niyaz

  What are some general guidelines to increase the speed/performance of my Windows machine?

  Read the article

• General video performance affected on Mac OSX 10.5 (PowerBook G4)

  - by r0ca

  Hi all, I'm quite new to Mac and I just got a PowerBook G4 for free. I installed OSX 10.5 on it and for the first two weeks, everything was going kinda smooth even if this is similar to a P3. I'm not expecting awsome video performance but at least be able to watch some videos from Youtube. Yesterday night, I installed Office 2008 for mac and this morning, even after a reboot, my computer is way much slower that I used to know. I watched a youtube video and the framerate was 1:1. I also noticed it on flash adds, it's way slower! Is there anything that I can do to increase video performance, see what's the process list running and taking more GPU or CPU, what's taking more ram and stuff like that?! What do you guys, Mac pros, would do on an old laptop with OSX 10.5 Thanks!

  Read the article

• Verify server performance

  - by George Kesler

  I'm looking for a quick and SIMPLE way to verify that new servers are performing as expected. The most important metric is disk performance, second is network performance. I’m trying to prevent problems caused by misconfiguration of RAID arrays, NIC teaming etc. The solution should work with both physical and virtual servers. I don’t need sophisticated analysis with different workloads, just one set of benchmarks which I would run against a reference server and later compare to new ones. One problem is that most benchmarks are not giving accurate results when running on a VM.

  Read the article

• RAID10 without write-back cache = horrible write performance?

  - by Harry Mexican

  I have just provisioned a dedicated server on singlehop. I'm running it through some tests to know what to expect performance-wise. On the I/O side (with 4 1TB disks in RAID 10) I get: write-cache disabled 200 MB/s read throughput 30 MB/s write throughput I thought that was really low compared to my desktop HD which gets 150-150 or so. So I had a chat with them and they suggested enabling the write cache. New results: write-cache enabled 280 MB/s read 260 MB/s write which is great and all but means I'd have to add a BBU for an additional monthly cost. Is it normal for the write throughput to be 1/4 of a regular drive on RAID10, if you don't have write cache? It almost feels like its intentionally bad to force you to pony up for the BBU. I'd be happy with normal non-raid performance of 150/150.

  Read the article

• Analyzing Linux NFS server performance

  - by Kamil Kisiel

  I'd like to do some analysis of our NFS server to help track down potential bottlenecks in our applications. The server is running SUSE Enterprise Linux 10. The kind of things I'm looking to know are: Which files are being accessed by which clients Read/write throughput on a per-client basis Overhead imposed by other RPC calls Time spent waiting on other NFS requests, or disk I/O, to service a client I already know about the statistics available in /proc/net/rpc/nfsd and in fact I wrote a blog post describing them in depth. What I'm looking for is a way to dig deeper and help understand what factors are contributing to the performance seen by a particular client. I want to analyze the role the NFS server plays in the performance of an application on our cluster so that I can think of ways to best optimize it.

  Read the article

• performance block countries using iptables /netfilter

  - by markus

  It's easy to block IPs from country using iptables (e.g. like http://www.cyberciti.biz/faq/block-entier-country-using-iptables/). However I read that the performance can go down if the deny list get too large. An alternative is installing the iptables geoip patch or using ipset ( http://www.jsimmons.co.uk/2010/06/08/using-ipset-with-iptables-in-ubuntu-lts-1004-to-block-large-ip-ranges/) instead of iptables. Does anyone have experience with the various approaches and can say something about the performance differences ? Are there are other ways to block country IPs in linux which I did't mentioned above?

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >