Search Results

Search found 4248 results on 170 pages for 'adsl router'.

Page 120/170 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

• Tunnel into Sonicwall VPN while on Sonicwall wifi?

  - by Patrick Harrington

  Hey all, I am able to hit my company's VPN while I am at home using a dedicated IP with no issue. When I am at work, the VPN we use (a Sonicwall router/VPN/wifi access point), I can get outside internet fine, but am unable to connect to the VPN. I know that the wifi puts me on a different subnet, and when I try to connect to the normal VPN IP it won't work, and a traceroute just times out. Any suggestions? Might there be an internal IP I need to hit while here at work?

  Read the article

• Mac Mini Wake on Lan

  - by ILMV

  My Mac Mini has a setting in the Energy Saver category called Wake for Ethernet network access. Now the way I read this option is that any network access to the Mac whilst it is asleep will wake it up, but it doesn't. I have read that I have to send it the magic packet to wake it up, but what I really want to do is be able to simply attempt to access the Mini over the network and it wake up on demand without sending a magic packet. Can this be done? If it helps I am using a Netgear router.

  Read the article

• Openswan + xl2tpd connections time out after a while

  - by Halfgaar

  I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

  Read the article

• Sonicwall SSL VPN: Unable to reconnect once connection drops

  - by Jeffrey Hantin

  One of my users is having problems with his NetExtender connection. After installing NetExtender from the portal, it connects fine -- ONCE. After that, attempting to reconnect gives Verifying user...authentication fail! and the log on the router shows: [timestamp] | Info | SSLVPN | Auth Failed: No user name in http request (message id: 1079) This seems odd to me because the user name, password and domain are entered on the NetExtender client. After this error occurs, the only way to connect again is to uninstall, reboot, and reinstall NetExtender. He can connect fine to the Sonicwall SSLVPN demo site, and a different user can connect fine to this site from a different PC. Any clues?

  Read the article

• Cannot Connect to internet in windows 7 (No Internet Connection)

  - by user22062

  I have an airport express and Win 7 pro. My router is a Trendnet TEW-423PI G. The problem is everytime i try to connect it says it is unsuccessful and can't find ip address. I have tried everything. WPA2, WPA, WEP, Messing with the registry, Manually Inputting the ip address, Reinstalling drivers. I have two Macs that connect perfectly and are both running Snow Leopard that is why I am able to post this. What Should I do. I'm Going Crazy

  Read the article

• How to Route Traffic in Case PPTP Remote Client is on Same Subnet as Server

  - by Marcus Cole

  I've a PPTP server setup on my local home network (192.168.1.0/24, pfSense). Now sometimes when I'm away and want to connect remotely my client (Windows 7) is also on the same network because e.g. the hotel has set it up the same way. Thus the connection works, but I can't reach any PC on my home network because everything is routed directly to the client local router which is in the same subnet. Is there a way to work around this by messing with a configuration or adapting Windows routing table, i.e. without modifying either network?

  Read the article

• Port Forwarding on 80 vs. 8080

  - by Chadworthington

  I am able to access this url (Don't bother clicking on it, it's just an example): http://my.url.com/ This web site works: http://localhost:8080/tfs/web/ I setup my router to forward port 80 to the PC hosting the web site. I also forward port 8080 to the same box. But when I try to access this url I get the eror "Page Cannot be displayed:" http://my.url.com:8080/tfs/web/ I fwded port 8080 the same way I fwded port 80. I also turned off Windows Firewall, in case it was blocking port 8080. Any theories why port 80 works but 8080 does not?

  Read the article

• Dynamic DNS at freedns.afraid.org using a Fritz!Box

  - by kai

  I am having some trouble setting up Dynamic DNS with my Fritz!Box 7360. I have set up the Dynamic DNS page with (this is translated from German, so might be worded a bit differently): [x] Use dynamic DNS Dynamic DNS Provider: User defined Update-URL: https://freedns.afraid.org/dynamic/update.php?MY-DIRECT-URL-KEY Domain Name: mydomain.crabdance.com User Name: myusername Password: mypassword Now on the FritzBox status page, it says: Dynamic DNS: activated, mydomain.crabdance.com, Status: Account temprarily deactivated When I check back on http://freedns.afraid.org, my IP address never changes. Is there any way to fix this? Note my router is on an IPv6 network (m-net), with IPv4 only through DS-Lite. I'm not sure whether this affects anything. Update: Following the guide here (putting myusername instead of MY-DIRECT-URL-KEY) hasn't given any succes. However, the status field has changed slightly: Dynamic DNS: activated, mydomain.crabdance.com, Status: unknown

  Read the article

• Problems with wireless file copy - hangs during copy

  - by Eran Kampf

  I have this problem on my home network where when I try to copy files via wireless connection, at some point the copy fails and the machine doing the copy loses connection to the network. I'm pretty much lost as to figuring out the source for the problem... Some more details that might help: It's not OS related. I have Windows 7 machines and Leopard machines and this occurs on both I'm using a 3com OfficeConnect router Wired transfer works fine Other programs that require heavy wireless traffic work just fine:streaming large HD movies, Xbox Live! ... I'm lost as to how to even begin trying to diagnose the problem so any tips are welcome...

  Read the article

• OpenVPN slow with Firewall enabled on Zyxel ZyWall USG-100

  - by aleroot

  I have an OpenVPN server on a Linux machine, after installing a ZyWall USG-100 I'm experiencing extremely slowness navigating web servers on my remote LAN through the VPN connection, while accessing the web interface of the ZyWall is fast. I have configured everything : the Virtual Server for the OpenVPN Server, the static route as with the replaced router that I had before installing the ZyWall Today. I even added a rule to the firewall that allows connection to the OpenVPN Server machine : but navigation on the LAN through the VPN still slow, it seems that the Firewall is blocking packages, since if I disable the firewall on the USG-100 everything works fast as usual, while with the firewall enabled it is extremely slow. Why ? Do I need to add some other rule to the firewall to speed up ?

  Read the article

• WAMP, DD-WRT, Using DNSMasq to access multiple virtual hosts via aliases on local network

  - by christian

  I've updated my question to coincide with my progress I am attempting to configure WAMP on my development machine. I would like to use it in conjunction with DD-WRT's DNSMasq feature to access multiple virtual hosts via aliases (dev1.local,dev2.local,etc.) over my local wireless network. I have followed the following tutorial which allows me to setup virtual hosts and access on local network by ip addresses. http://www.logicspot.com/web-development-2/viewing-a-locally-hosted-website-with-your-smartphone/ I've got this up and running. For simplicity sake I'd still like to setup DNSMasq to connect via aliases. I have followed the following tutorial http://www.question-defense.com/2008/12/29/add-static-dns-entries-to-dd-wrt-router-firmware And the aliases load on my development machine, but I can not access via the aliases on my mobile devices connected to the local network. I can however access via IPs. Thanks for any help you can provide

  Read the article

• What are industry standards and professional best practices in network hosts naming? [closed]

  - by Ivan

  Possible Duplicate: Naming convention for computers It seems an important and difficult dilemma for me how to name network hosts (routers, servers (while a server can be a router and host diverse services at the same time), virtual machines (while they host important services and can migrate), workstations and notebooks (using pc-username is not the best idea as users may change), printers & MFUs, surveillance IP cameras, etc). Are there known and accepted best practices for this task? Excuse me if there already was a similar question here (I think it probably was), I haven't found it.

  Read the article

• Mac OS X: How do I disable SSID Broadcasting with Internet Sharing over Airport?

  - by Jack Chu

  I'm currently using Internet Sharing from my Ethernet over Airport on my Macbook Pro, however I don't want my SSID broadcasted†. There doesn't seem to be an option in Sharing/System Preferences to hide my ssid or prevent broadcasting. Any ideas? † My parent's restaurant has a wifi router, but it's on the roof level where the cable was installed. The signal it gets is weak, but works for the macbook. Their iPhones and 802.11G based computers can't get the wifi connection, maybe 802.11N on the macbook gets better penetration. I figure they could use the airport sharing from the laptop. For a restaurant type setting I don't think having WPA or WPA2 is super important. There's nothing sensitive or insecure on the network, so I figure hiding the SSID would be good enough for their purposes. It's not even active 100% of the time.

  Read the article

• Unidentified Connection in Compaq CQ61Windows7 OS on DSL cable network connection

  - by Mohammed Thouseef

  I have Dell studio with shared DSL internet connection my router is "NETGEAR DG834" & Network connection discription is "Broadcom netlink tm gigabit ethernet" this connection is working fine with dell laptop with Vista homepremium OS. My Question is? If i connect HPcompaq presario CQ61 in this connection it will automatically select Public network and display unidentified connection i tried several times but not suceeded its OS is Win7 home premium. but wireless networking is working fine only this problem is faceing with DSL cable connection when i diagnos the connection an error will generate "Local Area Connection does not have a valid IP configuration" in LAN Connection status window i noticed IPV4 & IPV6 Connectivity is showing "No Network Access" please can you clarify whats the problem.

  Read the article

• Loadbalancing outbound traffic while using openbgpd on freebsd

  - by Rajkumar S

  Hi, I am using openbgpd in freeBSD with 2 ISP connections. I have my own AS number and a /22 network. Currently I am advertising entire /22 to both networks. Inbound traffic comes in But my outbound traffic goes via a single link. I would like to either distribute my outbound traffic via both links so that outbound traffic is also load balanced. How to configure this using openbgpd in freebsd? My current openbgpd config is attached for reference. AS 00my-as listen on xx.xx.xx.x router-id xx.xx.xx.x network aa.aa.aa.0/22 group "ISP1" { remote-as 11remoteas-1 neighbor bb.bb.bb.1 { descr "ISP1" announce all } } group "ISP2" { remote-as 22remoteas-2 neighbor cc.cc.cc.37 { descr "ISP2" announce all } } deny from any deny to any allow from bb.bb.bb.1 allow to bb.bb.bb.1 allow from cc.cc.cc.37 allow to cc.cc.cc.37

  Read the article

• dns service on OS X Snow Leopard Server

  - by Sorin Buturugeanu

  Hello all, I have a Mac Mini (1.83GHz, 1.5 RAM) with a fresh install of OS X Snow Leopard Server and I want to use it for DNS and web hosting. What I have done so far is to go to the domain registrar and configure a new nameserver (ns.domain.tld) to point to my static IP. This Mac Mini is behind a DI-524 router and I have forwarded ports 53 and 80 to the Mini. I have also added the domain name to the DNS configuration pannel (as in the attachment), but intodns.com gives the following error (among others, and obviously the site is not working): "Mismatched NS records WARNING: One or more of your nameservers did not return any of your NS records." I don't know where to go from here .. Thank you to anyone willing to take the time to give me a hint!! seems that I can't post images but here's the link: http://i.imgur.com/zWI7Y.png

  Read the article

• How to hack airport extreme to support USB 3G modem?

  - by Mike Caron

  Has anyone out there ever tried to hack the Airport Extreme, specifically with regard to the USB port? There are many cellular routers available that provide WiFi sharing of a USB modem link. However, instead of buying yet another router, I'd like to use my expensive Airport Extreme with it. The AE has a USB port on the back, but it's been said that it only talks to printers. Is there a way to hack the USB driver on the AE to allow it to recognize a USB modem, then use that as the connectivity instead of the LAN? I would imagine that one could use OpenFirmware to boot something on the AE. If one can boot it, then one could provide access using SSH across the lan. Once access is granted, then let the hacking begin... but I don't know how to (a) get the mini-osx on to USB (is it the same as the ATV without a UI?) or (b) how to load up certain things once boot has begun.

  Read the article

• Can't ping host from vmware guest using bridged networking

  - by user199421

  Host is Windows 7 Guest is Ubuntu 11.04 Network adapter is wireless I can ping other computers on the network but not the host. No firewall are involved. Sniffing the traffic with wireshark it looks like both the host and the guest are using the same MAC address. My guest simply doesn't receive a reply when asking for 192.168.1.101 (the host) My router has no problem giving both of them different IP addresses but maybe duplicate MAC address is the problem? It seems logical that both will have the same MAC address (from the host point of view) but it strange that there is no work around for this because otherwise I don't see how the host and guess are supposed to communicate.

  Read the article

• Cisco PIX 515 internet connection

  - by Steve

  We have a ASDL modem connected to a Cisco PIX 515 to a switch. We have managed to get the PIX setup with ethernet1 (inside) with our IP range 192.168.5.1-192.168.5.254 and the internal network is working fine. We are having difficulty getting a connection from the PIX through the router on ethernet0 (outside). We have managed to ping external networks by setting up IMCP echo/echo-reply but are unable to setup any other protocols in a similar manner. Can any one help with a few lines that could be typed into the console that will allow this connection?

  Read the article

• Issues in getting Synergy setup

  - by chris

  For some reason I cannot get things working when the Linux box is the server and the macbook pro is the client. However I can get things working just fine in the inverse, unfortunately since the macbook is not the primary machine, and not powered on all the time, the later setup won't work. Here is the error that I am getting: started client connecting to '10.0.1.4': 10.0.1.4:24800 The only firewall that I have is the one on the router, so since things work with the macbook as the server I am pretty sure that is not where the problem is. Here is the .synergy.conf file section: screens Chris-MacBook-Pro: # I have tried this with the .local as well chris-archlinux.local: end section: links Chris-MacBook-Pro: right = chris-archlinux.local chris-archlinux.local: left = Chris-MacBook-Pro.local end ** Update: I should also add that I can ping the linux machine from the mac. To try get things working, I have also prevented the hosts.deny/.allow files from blocking anything. An ideas to where the problem could be?

  Read the article

• Campus Network Design - Firewalls

  - by user3081239

  I am designing a campus network, and the design looks like this: LINX is The London Internet Exchange and JANET is Joint Academic Network. My goal is an almost-fully redundant with high availability, because it will have to support about 15k people, including academic staff, administrative staff and students. I have read some documents in the process , but I am still not sure about some aspects. I want to dedicate this one to firewalls: what are the driving factors in deciding to employ a dedicated firewall, instead of an embedded firewall in the border router? From what I can see, an embedded firewall has these advantages: Easier to maintain Better integration One less hop Less space requirement Cheaper Dedicated firewall has the advantage of being modular. Is there anything else? What am I missing?

  Read the article

• Issues configuring CUPS print server for Ubuntu Server 9.10

  - by Tone

  I have a 9.10 Ubuntu Server installed and I want to make it a print server and am trying to get access to the cups browser admin page from a windows client machine. I installed cups: sudo apt-get install cups then I edited the /etc/cups/cupsd.conf file and tried several different listen cominbations: Listen 192.168.1.109:631 #ip my router gives it3 Listen /var/run/cups/cups.sock #already in conf file Listen fileserver:631 #hostname of server Port 631 #listen for all incoming requests on 631? samba is also installed (which I think is necessary to share the printer out? and finally I added my user to the lpadmin group: sudo adduser tone lpadmin but when I try to navigate any of the following I get 403 forbidden http://fileserver:631/admin http://fileserver:631 http://192.168.1.109:631/admin http://192.168.1.109:631 What did I miss?

  Read the article

• DYNDNS setup with TightVNC on Windows Server 2008 R2

  - by StealthRT

  Hey all, i seem to be having a problem with getting ports to forward on my Windows Server 2008 R2 PC. I already set all my port forwarding for 5900/5800 on my router for my PC's IP address (192.168.1.22) but when i try to use the TightVNC PFPortChecker on port 5900 it tells me its not opened! I can not even connect to my DYNDNS server name (xxxxxxx.dyndns.org). As a side note, i am running Windows XP SP3 within a VirtaulBox inside Windows Server 2008 R2 but running the PFPortChecker in Windows 2008 R2 brings the same results as it does in the VM. I also added them to the Windows Firewall Advanced Security form to add those inbound ports for full access. What could i possibly be missing? Thanks for your time! David

  Read the article

• How to stop intermittent playback on airtunes (iTunes + Airport Express)?

  - by Alex B

  Is there a definitive answer for how to stop intermittent "skips" or pauses while playing music from iTunes to an airport express connected to my home stereo? When I read other forums I see a wealth of posts that say "I did XYZ and it's fixed" followed by "I tried XYZ and it didn't work." This does not appear to be signal strength related. The green light on the Airport Express does not turn to yellow/orange. Other wireless devices have no trouble connecting at the same or greater distances from the wireless router.

  Read the article

• WAN interface responds as LAN when request comes from LAN, is that correct?

  - by Eugenio Miró

  Hi Everyone! I have a problem with my router/modem. I've published an HTTP service from one of my internal computers and when I access the service from the internal lan using the external IP address the modem responds instead of redirecting the call to the forwarded port. I can access the service from outside however, but from the internal network the modem responds to my calls. I'm using a ZTE ZXDSL 831 Series modem with ZXDSL 831IIV7.5.1e_E09_BR1 firmware. Thanks in advance!

  Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >