Search Results

Search found 19000 results on 760 pages for 'boot tool'.

Page 120/760 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

  • Windows boots to Black Screen of Death — Is my HDD faulty?

    - by Flynn1179
    My wife's PC suddenly stopped booting up properly. It gets as far as the Windows 'loading' screen with the bar scrolling away, but that's as far as it gets for some time, then suddenly flashes up a BSoD barely long enough to see, then the display cuts out. We've got identical PCs, and after swapping components, I established that my PC suffers the same problem if I swap in the HDD. Even if I plug hers in as a second HDD on my machine, it still does the same thing, even though it's booting from mine. I can't even boot her machine from CD or DVD either, so I couldn't even use a recovery disc. I did manage to partially boot my PC into safe mode with the other HDD attached, and it got as far as loading 'crcdisk.sys' and froze. Anybody know what could be wrong with it, or at least how I can get the data off the disk? I'm assuming there's still data on the disk, given that it at least shows me the vista 'loading' screen.

    Read the article

  • Enabling Session Directory under Terminal Server Configuration Tool and Server Settings

    - by LPE
    Yello, I'm trying to add up a Terminal Server Session Directory client to an already fully functional Session Directory cluster which today runs two clients as well as the server. I've been reading up on both Google, Microsoft KB's as well as old documentation from an earlier employee but to no avail. The step I'm stuck at is when I open up Terminal Server Configuration Tool (tscc.msc), chooses ServerSettings. I know there should be an option saying "Session Directory" on the right hand side along with Active Desktop, Licensing and whatnot, but it's not there. I've logged on to both the other already functional clients and checked the same list and there the Session Directory option sure is both visible as well as working good with the specified information. This picture is the same view that I'm looking at at the moment, but mine is missing the bottom option that says "Session Directory" http://www.inetnj.com/doc/images/TerminalServerConfiguration.jpg Any help would be greatly appriciated. Regards LPE

    Read the article

  • How to make a pxe bootable 10MegaByte or larger dos image?

    - by rjt
    Would like to make a "massive" DOS floppy disk image, say 10MegaBytes or more containing all the firmware updates i need for any system, harddrive, BIOS. i do not need the DOS image to be networkable as everything will be on the PXE booted image, but networking would be nice. Since ZipDisks were attached to the floppy disk controller and were over 100MegaBytes, this should be possible. i tried a long time ago to do this and spent too much time on it only to have it fail to boot. So if someone has reliable instructions on how to create such a nightmarish beast and edit it, please let me know. One image that can used for PXE and copied to a USB stick would be a plus. Too bad manufacturers don't supply a single bootable Linux ISO containing all their firmware updates, that would be easy to boot over-the-lan and have networking. HP servers do this and it is awesome.

    Read the article

  • udev: waiting for uevents to be processed on my Gentoo

    - by stan31337
    During the startup I see machine executing this thing for about 30 seconds: udev: waiting for uevents to be processed Then I get a quick message which says something like: devfs: timeout (50 seconds) I can't see the whole thing because after that system starts up very fast including Xfce. What logs and configs do I need to provide for further investigation? $uname -a Linux genta 3.6.6-gentoo #1 SMP Sun Nov 11 11:02:23 NOVT 2012 i686 Genuine Intel(R) CPU T2300 @ 1.66GHz GenuineIntel GNU/Linux Thank you! UPD: rc-status genta / # rc-status sysinit Runlevel: sysinit dmesg [ started ] udev [ started ] devfs [ started ] genta / # rc-status boot Runlevel: boot hwclock [ started ] modules [ started ] fsck [ started ] root [ started ] mtab [ started ] localmount [ started ] sysctl [ started ] bootmisc [ started ] hostname [ started ] termencoding [ started ] keymaps [ started ] net.lo [ started ] swap [ started ] urandom [ started ] procfs [ started ]

    Read the article

  • Workaround for starting zabbix agent on Ubuntu. update-rc.d LSB mismatch

    - by bryan kennedy
    I am trying to run the zabbix-agent (1.8.1) on boot on Ubuntu (lucid 10.04). Zabbix is installed just fine, and it manually starts just fine with /etc/init.d/zabbix-agent start However it doesn't start on boot, because when I run: sudo update-rc.d zabbix-agent default I get: update-rc.d: warning: zabbix-agent start runlevel arguments (none) do not match LSB Default-Start values (2 3 4 5) update-rc.d: warning: zabbix-agent stop runlevel arguments (none) do not match LSB Default-Stop values (0 1 6) After googling around I found some cryptic information about this being a possible bug with Zabbix's startup scripts, but I can't find a workaround. I'm trying to understand how the update-rc.d system works, but I'm not getting very far. How can I modify this setup to start the zabbix-agent on startup?

    Read the article

  • Windows 7 EFI Partition Deleted

    - by Sam Clark
    I converted my Windows 7 GPT disk to dynamic, which resulted in it being unable to boot. So I used EaseUs Partition Master on my second Win 7 installation to convert the disk back to basic. Now, I have one partition, which is my C: drive, and I can't figure out how to recovery my EFI partition. I no longer see the "Windows" entry in my EFI boot menu. The Windows 7 repair on the install DVD doesn't see my installation. Please let me know how to restore the EFI partition.

    Read the article

  • Is the motherboard the cause of these errors?

    - by ianfuture
    Motherboard is : ASUS A7N8X-E Deluxe, Rev1.01, On start up get: "cmos checksum error - defaults loaded" error BIOS is reset everytime and can't boot to Windows off HDD. POST report is ok once I tell it there is no Floppy drive attached and not to seek it. The boot sequence starts then just as get to load windows safe mode options whole PC shuts down. BIOS is reset to defaults again. I've checked the battery and jumpers. Tried a known working battery. Changed Graphics card, changed memory, changed HD to one without an OS. Disconnected DVD drive. PSU is known to be ok. IN BIOS CPU is recognised correctly and memory is also recognised ok. So is it likely to be a bad motherboard or corrupted BIOS or something else? Thanks :)

    Read the article

  • Tool to monitor file size, file existence, parse xml, etc

    - by Artur Carvalho
    I'm trying to find some tool that helps me monitor several things. What are some requirements: Shows results on a web page. Checks existence of files/folders Checks sizes of files/folders Can parse xml files Can have several status depending if it's for instance, after 9pm Ping workstations/Servers to ensure they are on or off create daily/weekly/monthly reports (pdf, html, csv) show daily/weekly/monthly scheduled tasks check if specific users are logged in a machine check which users are logged in in a machine I've looked into some solutions but could not find what I wanted. Usually tools like nagios are more focused in servers, and spiceworks is not so specific. At this point I'm using a little powershell script that does several of these items, but before losing more time probably reinventing the wheel, what tools are out there? Thank you in advance.

    Read the article

  • Tool to check if XML is valid in my VS2012 comments

    - by davidjr
    I am writing the documentation for our companies software developed with vs2012. I need to add xml examples to the summary of each class, due to xml instantiation of objects. We are using sandcastle to create the documentation (company choice), and I want to be able to review my xml comments without building the help file every time. Is there an application that anyone would recommend where I can view how the xml renders before I build the help file? Here is my example: /// <summary> /// Performs DFT on a data array, writes output in a CSV file. /// </summary> /// <example> /// <para>XML declaration</para> /// <code lang="xml" xml:space="preserve"> /// %lt;DataProvider name="DftDP" description="Computes DFT" etc... I want to check the XML to make sure it is valid, maybe by copy and pasting it into a tool of some sort?

    Read the article

  • Needs free/ opensource network monitoring tool for office LAN

    - by Amit Ranjan
    I know there must be a lot similar questions on SU. Let me explain my setup first. I have 4-5 PC, Laptops and Few Android Phones in my office. To get them on a network , I have a UTStarCom, WA3002G1 ADSL2+ router with a landline broadband connection which has nothing to do with any PC except the configuration settings. Broadband channel is always on, we need to switch on the router and the internet is ready for us. No Internet Connection sharing is done via any PC. I have a limited 20GB monthly plan, which is consumed in 10-20 days, depending upon the download requirements. So in the above case, i need some suggestions from you: How do I monitor my Internet Bandwidth along-with the connected systems, realtime? Any free opensource tool available? Tweaks / Changes in PC to save bandwidth as my ISP do not have any Unlimited plan. PC and Laptops are Windows XP and/Or windows 7. Either of the platform tools are welcome.

    Read the article

  • Freezing with black screen after booting OS with AMD Catalyst driver

    - by Oleg
    I have ATI Mobility Radeon HD 5470 on my HP laptop. A few weeks ago I was confused with a weird trouble in proprietary drivers for my graphics card. When I start X server (or just boot Windows) system sometimes totally hangs up with black screen. The most annoying thing is that issue appearing is absolutely random (2 success, 3 fails, 1 success, 7 fails, etc.). It appears both on Linux (Arch, Debian 7) and Windows XP. I've tried reinstalling OS, drivers, etc. I've also tried updating BIOS. Then boot was successful for the next few times and issue appeared again (probably it was just a coincidence, because another BIOS updates gave no results). I really don't know what to do. Any ideas?

    Read the article

  • Mac Air Bootcamp Windows 7 Installation and USB3 Hurdles

    - by Casey
    I am trying to load windows 7 on a new Mac Air(OS X 10.9 Mavericks) using Boot camp, a downloaded windows 7 iso file, and USB3 flash drive. No obvious issues with stepping through the initial phases of boot camp and disc partition, but when the system reboots to load windows setup/install from the USB3 flash, it stalls after a few screens and gives a "missing cd/dvd drive" error. I have read similar posts regarding this fail that imply there is possibly a windows 7 compatibility concern with USB3, and that if a USB2 port is available....or if you can change your BIOS to make your USB3 look like USB2...then you can get around this error. Unfortunately I only have USB3 ports on this system, and it appears accessing the PC equivalent "BIOS" on the new Macs is very difficult....and if you screw it up you can ruin the system. Does anyone have any suggestions? I should also mention that there is NOT a CD/DVD drive on the Mac Air....and I can't migrate to Windows8 (for various reasons). Any help is much appreciated!!

    Read the article

  • Can I turn my Mac Mini into a Wi-Fi Hotspot without additional tool

    - by user262325
    Hello everyone I have an app need to test via wifi. I just wonder if there is a way to turn my Mac Mini into a Wi-Fi Hotspot without additional tool. I try to setup airport new network name is"mymacmini'. My iPod Touch also can recognize the network "mymacmini". I set my iPod wifi as "mymacmini" But if I try to connect to Internet, Safari always reports failure and connnection with Wifi. I hope to know if I need purchase a wireless router for MAc Mini or there are something wrong I did above? Thanks interdev

    Read the article

  • Windows command line built-in compression/decompression tool?

    - by Will Marcouiller
    I need to write a batch file to unzip files to their current folder from a given root folder. Folder 0 |----- Folder 1 | |----- File1.zip | |----- File2.zip | |----- File3.zip | |----- Folder 2 | |----- File4.zip | |----- Folder 3 |----- File5.zip |----- FileN.zip So, I wish that my batch file is launched like so: ocd.bat /d="Folder 0" Then, make it iterate from within the batch file through all of the subfolders to unzip the files exactly where the .zip files are located. So here's my question: Does the Windows (from XP at least) have a command line for its embedded zip tool? Otherwise, shall I stick to another third-party util?

    Read the article

  • DVD ROM is not working

    - by Cyril N.
    (note: I don't know in which StackExchange site to put this question, I'll thank the moderator that will move it to a more appropriate place, if there is a S.E. available for my question). I have a DVD RW drive that is well listed in the bios, and if no CD is in, it is also present in the "My Computer" of my Fedora 16. But when I put a disc on it, the icon disapear from "My Computer", and I can not do anything with this ! (Like erasing a RW disc). I'd like to boot a Fedora 17 Live CD image. I burned it on an other computer but when I try to run it in bios, nothing is done and I'm redirected to Grub of my HD. The command cdrecord -scanbus shows this : wodim: Warning: controller returns wrong size for CD capabilities page. wodim: Cannot get CD capabilities data. 6,1,0 601) 'HD-DT%ST' 'DVD%RAM G@22NP20' '1&04' Removable CD-ROM And when I try to mount manually the disc, I got this error : mount: block device /dev/sr0 is write-protected, mounting read-only mount: /dev/sr0: can't read superblock Here's a paste of dmesg | grep sr0 : [ 5.161265] sr0: scsi-1 drive [ 5.161621] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 834.545978] sr0: Hmm, seems the drive doesn't support multisession CD's [ 841.731194] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 842.021640] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 842.021652] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 842.021662] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 842.021672] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 842.021688] end_request: I/O error, dev sr0, sector 0 [ 842.021697] Buffer I/O error on device sr0, logical block 0 [ 842.023715] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.048203] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.048211] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.048219] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.048234] end_request: I/O error, dev sr0, sector 0 [ 843.048274] EXT4-fs (sr0): unable to read superblock [ 843.063155] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.075904] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.220512] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.220522] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.220530] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.220538] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.220553] end_request: I/O error, dev sr0, sector 0 [ 843.220609] FAT-fs (sr0): unable to read boot sector The lines from Sense Key .. (line 6) to DRIVER_SENSE (line 11) are repeating a lot. I then changed my DVD player with an other spare one I had, and the disc didn't boot neither. I then changed the IDE cable, but still no success. What can I do to make it work? Thanks for your help.

    Read the article

  • I'm looking for a monitor tool to test Jitter, ICMP, Traceroute and other network issues

    - by Elad Dotan
    I'm looking for a monitor tool to test Jitter, ICMP, Traceroute and other network issues. it could be an application I run from my company Network in NY and London or a SAAS service that have a service that can do it for me. I have a problem in my Data Center that I would like to fix. it happens in different times of the day. I want to run the monitor for few days and save the results so we can analyze them. any idea? Thanks!! Elad.

    Read the article

  • Computer cannot detect hard disk

    - by Nrew
    Details: BIOS: AMI Bios, set primary master to Auto OS: Windows XP Sp2 Memory: 384 Mb Processor: Pentium 3 yeah this one is really very old. And some of the capacitors in the motherboard are already bulging. It detected the hdd yesterday when were trying to fix it and install xp. But today it cannot boot and said: Boot failure. What can you suggest that I would do to revive this old machine. What would be the problem, is it the hdd, the ide cable or the motherboard.

    Read the article

  • HP proliant dl360 g5 fails to reboot

    - by user1039384
    Some history of this also available here. As of my latest update on the forum linked above, now cold reboot as well as hard reset and following boot for my proliant dl360 g5 works as expected and successfully boot the system. However, soft-reboot results in internal health indicator turning RED on the front and long beeps every around 6seconds until I either cold reboot or press and hold the power button. A summary of system state when this happens: Internal Health led indicator: RED External Health led indicator: Green No led next to any component is red or amber No POST message neither on the video output nor on IML logs (verified both at the time issue occures and after cold reboot that boots the system successfully). Any thoughts please share. I hope we can knock this issue down together with your help!

    Read the article

  • How can I create an encrypted, bootable thumbdrive containing Linux?

    - by Hanno Fietz
    I want to have a bootable flash drive that's fully encrypted. I have not tested, but seem to like, TrueCrypt, which provides a fully encrypted system and has lots of other features I like (for instance, hidden volumes). Unfortunately, it seems, system encryption is only supported for Windows, although I'm not sure why. The crux here, I guess, is that you need a boot loader that is capable of asking for your password and decrypt the disk, at least the part that contains kernel and initrd. An alternative might be to have an unencrypted boot partition containing a more powerful system which will decrypt and mount the main partition. However, this brings up the question of whether you're introducing data leaks. Depending on the specific scenario, I may lack the experience to assess if this is a problem. So I'd strongly prefer a fully encrypted disk or a similarly straightforward alternative.

    Read the article

  • How to install OSX into VirtualBox on a Macbook Air using Apple's Reinstall USB

    - by eug
    I'm currently dual-booting OSX and Ubuntu on my Macbook Air, but it'd be nice to run OSX within Ubuntu via VirtualBox. This seems possible using VirtualBox and is legal - there's even a post on an Oracle blog describing this: http://blogs.oracle.com/karim/entry/installing_mac_os_x_in. Actually, I've read elsewhere that it's only legal with OSX Server, but can't find a reason why it'd be illegal with normal OSX - please let me know if you think otherwise. The problem I have is that a MacBook Air doesn't come with a bootable DVD, but with a "Reinstall Drive" which is a USB stick that comes up as a CDROM drive. It doesn't seem to be ISO9660-formatted though but has an Apple partition table, with OSX installed on an HFS partition. refit says that it has a "boot.efi" as well. I don't know Apple booting/partitioning very well and would really appreciate some advice on how to convert this USB into an ISO or boot it in VirtualBox some other way.

    Read the article

  • install grub on disk image

    - by Dima
    I have disk image with 2 partitions: Partition 1 has cramfs file system (read only). This partition contains all system files of the OS Partition 2 has ext3 file system. This partition has only configuration files that may be changed. How can I install GRUB1 boot loader on MBR. I tried to copy first 446 bytes of my hard disk and copy GRUB files to the /boot directory on the 1st (cramfs) partition. I cannot use grub-install because I have disk image and not disk itself. Any ideas?

    Read the article

  • gcc sandboxing tool - AppArmor / CHROOT jail on Ubuntu 12.04

    - by StuR
    We have a Node application as the front end to a C++ sandboxing tool, which compiles code using gcc and outputs the result to the browser. e.g. exec("gcc -o /tmp/test /tmp/test.cpp", function (error, stdout, stderr) { if(!stderr) { execFile('/tmp/test', function(error, stdout, stderr) {}); } }); This works fine. However, as you can imagine this is a security nightmare if it were to be made public - so I was thinking of two options to protect my stack: 1) A CHROOT jail - but this in itself wouldn't be enough to prevent directory traversal / file access. 2) AppArmor ? So my question is really, how could I protect my stack from any nasties that could come from: A) Compiling unknown code using gcc B) Executing the compiled code

    Read the article

  • Reliable procedure/tool for removing print drivers in Windows 7 (domain environment)

    - by ultrasawblade
    One of the troubleshooting steps in resolving printer-related issues with any version of Windows is to remove installed print drivers and then reinstall the drivers. This is a domain environment and drivers are pulled from a print server. I've had occasion to need to do this on a user's system running Windows 7 Enterprise 64-bit. These procedures don't work: Removing the printer from Devices and Printers (doesn't remove driver obviously) Doing the above, going into Server Properties, and attempting to remove the driver (fails with a "driver in use" error) Opening an empty mmc, adding the Print Management snap-in, and attempting to do the above. Doing sc stop spooler and sc start spooler before doing both of the above Now I know it's possible to remove drivers with the spooler service stopped and then going into the spool directory, as well as deleting registry entries. I'm asking if a tool exists to do this where I can just select the driver in question and it be removed.

    Read the article

  • How to create an UEFI bootable USB stick from an ISO

    - by shiin
    I have an ISO image of my backup solution's recovery cd. When I burn the image to a CD-ROM, I can boot from it in UEFI or normal mode without problems. Unfortunately, this is no solution for my laptop, as it does not have an optical drive. Thus, I tried to create a bootable USB stick that can also boot in UEFI mode, but so far I have not been successful (note that the laptop has UEFI and boots Windows 7 in UEFI mode). So my question is, if anyone knows how I can get said ISO on my USB stick so that it boots as if I would use a CD-ROM?

    Read the article

  • Wake up and record in Windows Media Center on a Mac Mini

    - by Sir Code-A-Lot
    I'm currently considering buying a Mac Mini to use as a media center. I plan to install Windows 7 (or 8) on it, using Boot Camp. Will it be able to go into standby or hibernate (S3, S4?) and wake up to record TV scheduled in Windows Media Center? I haven't been able to find concrete information on supported standby types when running Windows under boot camp, and if Windows will even be able to wake when a recording should start. I just want to be clear on any limitations in this area before I buy anything.

    Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >