Search Results

Search found 3166 results on 127 pages for 'git p4'.

Page 120/127 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

• Confirm disk is broken when it passes all diagnostics

  - by Halfgaar

  I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

  Read the article

• ASP.NET MVC tries to load older version of Owin assembly

  - by d_mcg

  As a bit of context, I'm developing an ASP.NET MVC 5 application that uses OAuth-based authentication via Microsoft's OWIN implementation, for Facebook and Google only at this stage. Currently (as of v3.0.0, git-commit 4932c2f), the FacebookAuthenticationOptions and GoogleOAuth2AuthenticationOptions don't provide any property to force Facebook nor Google respectively to reauthenticate users (via appending the appropriate query string parameters) when signing in. Initially, I set out to override the following classes: FacebookAuthenticationOptions GoogleOAuth2AuthenticationOptions FacebookAuthenticationHandler (specifically AuthenticateCoreAsync()) GoogleOAuth2AuthenticationHandler (specifically AuthenticateCoreAsync()) yet discovered that the ~AuthenticationHandler classes are marked as internal. So I pulled a copy of the source for the Katana project (http://katanaproject.codeplex.com/) and modified the source accordingly. After compiling, I found that there are several dependencies that needed updating in order to use these updated assemblies (Microsoft.Owin.Security.Facebook and Microsoft.Owin.Security.Google) in the MVC project: Microsoft.Owin Microsoft.Owin.Security Microsoft.Owin.Security.Cookies Microsoft.Owin.Security.OAuth Microsoft.Owin.Host.SystemWeb This was done by replacing the existing project references to the 3.0.0 versions and updating those in web.config. Good news: the project compiles successfully. In debugging, I received an exception on startup: An exception of type 'System.IO.FileLoadException' occurred in [MVC web assembly].dll but was not handled in user code Additional information: Could not load file or assembly 'Microsoft.Owin.Security, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) The underlying exception indicated that Microsoft.AspNet.Identity.Owin was trying to load v2.1.0 of Microsoft.Owin.Security when calling app.UseExternalSignInCookie() from Startup.ConfigureAuth(IAppBuilder app) in Startup.Auth.cs. Unfortunately that assembly (and its other dependency, Microsoft.AspNet.Identity.Owin) aren't part of the Project Katana solution, and I can't find any accessible repository for these assemblies online. Are the Microsoft.AspNet.Identity assemblies open source, like the Katana project? Is there a way to fool those assemblies to use the referenced v3.0.0 assemblies instead of v2.1.0? The /bin folder contains the 3.0.0 versions of the Owin assemblies. I've upgraded the NuGet packages for Microsoft.AspNet.Identity.Owin, and this is still an issue. Any ideas on how to resolve this issue?

  Read the article

• W3WP crashes when initializing a collection

  - by asbjornu

  I've created an ASP.NET MVC application that has an initializer attached to the PreApplicationStartMethodAttribute. When initializing, a collection is instantiated that implements an interface I've defined. When I instantiate this collection, w3wp.exe crashes with the following two incomprehensible entries in the event log: Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb Faulting module name: clr.dll, version: 4.0.30319.1, time stamp: 0x4ba21eeb Exception code: 0xc00000fd Fault offset: 0x0000000000001177 Faulting process id: 0x1348 Faulting application start time: 0x01cb0224882f4723 Faulting application path: c:\windows\system32\inetsrv\w3wp.exe Faulting module path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll Report Id: c6a0941e-6e17-11df-864d-000acd16dcdb And: Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7600.16385 P3: 4a5bd0eb P4: clr.dll P5: 4.0.30319.1 P6: 4ba21eeb P7: c00000fd P8: 0000000000001177 P9: P10: Attached files: These files may be available here: Analysis symbol: Rechecking for solution: 0 Report Id: c6a0941e-6e17-11df-864d-000acd16dcdb Report Status: 0 If I remove the instantiation of the collection, the application starts normally. If I leave the instantiation, w3wp crashes. If I modify the interface, w3wp still crashes. I've tried every variation I could come up with on the theme of keeping the instantiation but doing everything else differently, but w3wp still crashes. My biggest issue here is that I have absolutely no idea why w3wp is crashing. It's not a StackOverflowException or anything concrete like that, all I get is the unintelligent junk cited above. I've tried to use DebugDiag and IISState to debug the w3wp process, but DebugDiag is only available for post-dump analysis in x64 (I'm running on Windows 7 x64, so the w3wp process is thus 64 bit) and IISStat says the following when I try to run it: D:\Programs\iisstate>IISState.exe -p 9204 -d Symbol search path is: SRV*D:\Programs\iisstate\symbols*http://msdl.microsoft.com/download/symbols IISState is limited to processes associated with IIS. If you require a generic debugger, please use WinDBG or CDB. They are available for download from http://www.microsoft.com/ddk/debugging. This error may also occur if a debugger is already attached to the process being checked. Incorrect Process Attachment I've double-checked 10 times that the process ID of my w3wp process is correct. I'm suspecting that IISState too only can debug x86 processes. Setting a breakpoint anywhere in the application does absolutely nothing. The break point isn't hit and w3wp crashes as soon as the request comes through to IIS from the browser. Starting the application with F5 in Visual Studio 2010 or starting another application to get the w3wp process up and running and then attaching the VS2010 debugger to it and then visiting the faulting application doesn't help. I've also tried to add an HTTP module as described in KB-911816 as well as add this to my web.config file: <configuration> <runtime> <legacyUnhandledExceptionPolicy enabled="true" /> </runtime> </configuration> Needless to say, it makes absolutely no difference. So I'm left with no way to debug the w3wp process, no way to extract any information from it and complete garbage dumped in my event log. If anybody has any idea on how to debug this problem, please let me know! Update My collection was initialized based on RouteTable.Routes which might have thrown an exception (perhaps by not being initialized itself yet in such an early stage of the ASP.NET lifecycle). Postponing the communication with RouteTable.Routes until a later stage solved the problem. While I don't really need an answer to this question anymore, I still find it so obscure that I'll leave it for anyone to comment on and answer, because I found no existing posts on this problem anywhere, so it might be of good reference in the future.

  Read the article

• Wrapping malloc - C

  - by Appu

  I am a beginner in C. While reading git's source code, I found this wrapper function around malloc. void *xmalloc(size_t size) { void *ret = malloc(size); if (!ret && !size) ret = malloc(1); if (!ret) { release_pack_memory(size, -1); ret = malloc(size); if (!ret && !size) ret = malloc(1); if (!ret) die("Out of memory, malloc failed"); } #ifdef XMALLOC_POISON memset(ret, 0xA5, size); #endif return ret; } Questions I couldn't understand why are they using malloc(1)? What does release_pack_memory does and I can't find this functions implementation in the whole source code. What does the #ifdef XMALLOC_POISON memset(ret, 0xA5, size); does? I am planning to reuse this function on my project. Is this a good wrapper around malloc? Any help would be great.

  Read the article

• recent cvs cygwin newline windows problems. How to solve?

  - by user72150

  Hi all, One of our projects still uses CVS. Recently (sometime in the past year) the Cygwin cvs client (currently using 1.12.13) has given me problems when I update. I suspect the problem stems from windows/unix newline differences. It worked for years without a problem. Here are the symptoms. When I update from the command line, I see messages like these: "no such repository" messages /cvshome : no such repository False-"Modified" due to newline differences M java/com/foo/ekm/value/EkmContainerInstance.java False-"Conflicts" cvs update: Updating java/com/foo/ekm/value/XWiki cvs update: move away `java/com/foo/ekm/value/XWiki/XWikiContainerInstance.java'; it is in the way C java/com/foo/ekm/value/XWiki/XWikiContainerInstance.java Note the for the 'no such repository' error, I found that cd-ing into the 'CVS/' folder and running 'dos2unix Root' updates correctly. I'm not sure how this file (or Repository or Entries) gets whacked. I don't remember when these problems started. I have a workaround: updating from our IDE (Intellij Idea) always succeeds Yes, I know we should switch to (svn|git|mercurial), but does anyone know what causes these problems? when they were introduced? workarounds? thanks, bill

  Read the article

• emacs frustration with web development any working dot-files?

  - by Tony Cruise

  I really liked flexibility of emacs but it is really annoying to make it work. I want to use it for web development html, css, javascript, php. I first tried emacs-starter-kit . It didn't included nXhtml. Also C-g key binding does not work (they call it starter kit but basic key command does not work). I think it is mapped for git control. That's a frustration for a beginner. Then I replaced emacs-starter-kit with nXhtml. At least C-g is working. But code completion sucks, M-tab does not work. I tried code completion from nXhtml menu with no success. Also NXhtml mode did'nt colorized my file if css is mixed with html. Isn't it recommended for mixed html, css,php files. So why it doesnt work?. Why Emacs folks do not aware of convention over configuration? Dam! ship it something works! Please help me before I am getting crazy. I use Ubuntu 10.04 and emacs-snaphot-gtk 23.1.50-1. Please guide me step by step with your working dotfile url. Even I accept I am a dummy, it is really annoying and frustrating to use emacs.

  Read the article

• Fail to load NPAPI plugin in Google Chrome on Mac OS X

  - by Roman

  I have been trying to get Google Chrome (6.0.401.1 dev) on Mac OS X to load an NPAPI plugin without success so far. I have been working around the npsimple example from here: http://git.webvm.net/?p=npsimple. Using gcc on Mac and VC++ 2008 on Windows I managed to get it running on Safari and Firefox on Mac OS X and Firefox and Google Chrome on Windows, but not on Google Chrome on Mac OS X. When trying to debug Google Chrome on Mac OS X it seemed Google Chrome was briefly dyld-loading (and immediately dyld-unloading) the plugin on startup, but without actually looking-up any symbols within the plugin or calling any of the functions. It seemed to be doing that for every plugin, though. Also, when loading a page with the embed-tag for the plugin, Google Chrome did not seem to even dyld-load the plugin and no functions were called (not even NP_GetEntryPoints). Google Chrome also does not output any error message, it just simply does not load the plugin. I am not sure I caught everything with gdb because of Google Chrome using different processes, but I have also tried all the switches like --no-sandbox, --single-process and --plugin-startup-dialog (which incidentally does not seem to work at all on Mac OS X). I also made sure the architecture of the binary matches (i.e. 32-bit for Google Chrome). Has anybody had similar problems before? Is there anything I am missing here, like a gcc switch when compiling or something? Any help would be greatly appreciated.

  Read the article

• error when running mysql2psql

  - by Mateo Acebedo

  I am trying to migrate a mysql database to a psql database, and after installing, I write the running command and instead of generationg the mysql2psql.yml file, this is what is being printed on my git bash window. $ mysql2psql c:/Ruby200/lib/ruby/2.0.0/rubygems/core_ext/kernel_require.rb:45:in `require': c annot load such file -- 2.0/mysql_api (LoadError) from c:/Ruby200/lib/ruby/2.0.0/rubygems/core_ext/kernel_require.rb:45:in `require' from c:/Ruby200/lib/ruby/gems/2.0.0/gems/mysql-2.8.1-x86-mingw32/lib/mys ql.rb:7:in `rescue in ' from c:/Ruby200/lib/ruby/gems/2.0.0/gems/mysql-2.8.1-x86-mingw32/lib/mys ql.rb:2:in `' from c:/Ruby200/lib/ruby/2.0.0/rubygems/core_ext/kernel_require.rb:45:in `require' from c:/Ruby200/lib/ruby/2.0.0/rubygems/core_ext/kernel_require.rb:45:in `require' from c:/Ruby200/lib/ruby/gems/2.0.0/gems/mysql2psql-0.1.0/lib/mysql2psql /mysql_reader.rb:1:in `' from c:/Ruby200/lib/ruby/2.0.0/rubygems/core_ext/kernel_require.rb:45:in `require' from c:/Ruby200/lib/ruby/2.0.0/rubygems/core_ext/kernel_require.rb:45:in `require' from c:/Ruby200/lib/ruby/gems/2.0.0/gems/mysql2psql-0.1.0/lib/mysql2psql .rb:5:in `' from c:/Ruby200/lib/ruby/2.0.0/rubygems/core_ext/kernel_require.rb:45:in `require' from c:/Ruby200/lib/ruby/2.0.0/rubygems/core_ext/kernel_require.rb:45:in `require' from c:/Ruby200/lib/ruby/gems/2.0.0/gems/mysql2psql-0.1.0/bin/mysql2psql :5:in `' from c:/Ruby200/bin/mysql2psql:23:in `load' from c:/Ruby200/bin/mysql2psql:23:in `' Any thoughts?

  Read the article

• error with "pmem.c" compiling linux source code for android

  - by Preetam

  I am compiling linux source code for android emulator. When i execute make command(for building and cross-compiling the linux source) i get the following error "pmem.c" file. root@ubuntu:~/common# make CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm - include/asm-x86 CALL scripts/checksyscalls.sh CHK include/linux/compile.h CC drivers/misc/pmem.o drivers/misc/pmem.c:441: error: conflicting types for ‘phys_mem_access_prot’ /home/preetam/common/arch/x86/include/asm/pgtable.h:383: note: previous declaration of ‘phys_mem_access_prot’ was here drivers/misc/pmem.c: In function ‘flush_pmem_file’: drivers/misc/pmem.c:805: error: implicit declaration of function ‘dmac_flush_range’ drivers/misc/pmem.c: In function ‘pmem_setup’: drivers/misc/pmem.c:1265: error: implicit declaration of function ‘ioremap_cached’ drivers/misc/pmem.c:1266: warning: assignment makes pointer from integer without a cast make[2]: * [drivers/misc/pmem.o] Error 1 make[1]: [drivers/misc] Error 2 make: ** [drivers] Error 2 root@ubuntu:~/common# how to resolve this error. It seems that there may some problems in the "pmem.c" file and i'll have to choose different git repository. but that would be a very complex thing, as now i have already done most of the things till here. I might have to see correct version of this file. please someone tell what should i do? how to solve this errors. please help..thankyou!

  Read the article

• Fluent config not generating mapping files

  - by rboarman

  Hello, I am trying to get Fluent nHibernate to generate mappings so I can take a look at the files and the sql. My code is based on this post and on what I can glean from the documentation. http://stackoverflow.com/questions/1375146/fluent-mapping-entities-and-classmaps-in-different-assemblies I am using the latest code from git. Here’s my config code: Configuration cfg = new Configuration(); var ft = Fluently.Configure(cfg); //DbConnection by fluent ft.Database ( MsSqlConfiguration .MsSql2008 .ConnectionString("……") .ShowSql() .UseReflectionOptimizer() ); //get mapping files. ft.Mappings(m => { //set up the mapping locations m.FluentMappings.AddFromAssemblyOf<Entity>() .ExportTo(@"C:\temp"); m.Apply(cfg); }); I also tried: var sessionFactory = Fluently.Configure() .Database(MsSqlConfiguration .MsSql2008 .ShowSql() .ConnectionString(“……")) .Mappings(p => p.FluentMappings .AddFromAssemblyOf<Entity>() .ExportTo(@"c:\temp\")) .BuildSessionFactory(); I have verified that the connection string is correct. The issue is that no mapping files show up in the ExportTo folder and no sql code shows up in the output window or in the log file. No errors or exceptions are generated either. I have no idea where to go from here. Thank you in advance. Rick

  Read the article

• Which Database to choose?

  - by Sundar

  I have the following criteria Database should be protected with a username and password. It should not be possible to copy the database file and use it else were like MS Access. There will be no central database server. Each machine will run their own database server locally and user will initiate synchronization. Concept is inspired from distributed version control system like Git. So it should have good replication support. Strong consistency is not needed. Users will synchronize each other database when they need. In case of conflicts it should be possible to find the conflict and present it (from application) to the user for fixing it. Revisions of data if available it will be good. e.g. Entire history of change to a invoice. I explored document oriented database and inclined towards the same. But I dont know what to choose. Database is small it will not reach even 1GB in the next few years (say 3 years). Please feel free to suggest any database which you think might be suitable. Any pointers is highly appreciated. Thanks in advance.

  Read the article

• emacs frustration with web development

  - by Tony Cruise

  I really liked flexibility of emacs but it is really annoying to make it work. I want to use it for web development html, css, javascript, php. I first tried emacs-starter-kit . It didn't included nXhtml. Also C-g key binding does not work (they call it starter kit but basic key command does not work). I think it is mapped for git control. That's a frustration for a beginner. Then I replaced emacs-starter-kit with nXhtml. At least C-g is working. But code completion sucks, M-tab does not work. I tried code completion from nXhtml menu with no success. Also NXhtml mode did'nt colorized my file if css is mixed with html. Isn't it recommended for mixed html, css,php files. So why it doesnt work?. Why Emacs folks do not aware of convention over configuration? Dam! ship it something works! Please help me before I am getting crazy. I use Ubuntu 10.04 and emacs-snaphot-gtk 23.1.50-1. Please guide step by step with your working dotfile url. Even I accept I am a dummy it really annoying and frustrating to use emacs.

  Read the article

• rails + sheevaplug = rails home development server and more

  - by microspino

  Hello I'd like to build a "Rails Brick" using a Sheevaplug from Marvell (O.S. is Ubuntu out of the box but You can install other distributions on It). It will be a home server and a silent, low cost (99$) low energy development machine. I'd like to add rails RVM, lot of gems, git-based heroku like deployment, passenger + nginx. This way I could have a portable server with a complete development environment and maybe I could find a hosting company where I can co-locate a grid of this devices or I can sell It as a simple little server for 10 or less users offices, with some centralized rails services (I think to a CMS, a BLOG, a WIKI, calendar or whatever this little jewel could afford). The usb port could make It a print server too or a UMTS link to the web via HUAWEI like usb UMTS keys. Can you give me some hint about: Is this project a crazy-close-to-failure idea? Why? which gem would You include? which rails open source app would you suggest? I have already an Excito Bubba Server at home, I saw the TonidoPlug so It came up in my mind to build something similiar but Rails based (Bubba is PHP based, TonidoPlug I don't know but It does not seems a Rails thing).

  Read the article

• TextMate tips for Rails Development

  - by Ganesh Shankar

  Working on Rails code for a bit has started me on the spiral into obsessively customising my dev environment (I say obsessive as at the last Rails meetup I went to there was some guy who was raving about shaving milliseconds off each line of code and therefore upto half an hour a day... I hope I don't become that guy...) I spend most of my time in TextMate so it seemed like a great place to start the optimising... So far I've added a few TextMate bundles like Git Bundle, Project Plus and the theme from Railscasts. I've noticed some of the other TextMate users I've come into contact with using heaps of nifty keyboard shortcuts and other plugins to help make their dev environment more friendly. Looking around the net, I was a bit overwhelmed by the amount of shortcuts and plugins available... So I was hoping to hear from other Rails developers out there: What are some good keyboard shortcuts and plugins that I should be aware of for TextMate with specific reference to Rails Development? I've read this question on SO: http://stackoverflow.com/questions/99807/what-are-some-useful-textmate-shortcuts but I was wondering if there was something a bit more specific to Rails development.

  Read the article

• Version control for PHP Developement

  - by Vinod Mohan

  Hello, I have been hearing a lot about the advantages of using a version control system and would like to try one. I was doing freelance web development in PHP for the past 2 years, two months back I hired two more programmer to help me. I will be hiring one more person soon. We maintain 4 websites, all of which are my own, which are continuously being edited by one of us. I learned PHP by myself and have never worked in any other firms. Hence I am new to version control, unit testing and all. Currently, we have development servers on our workstations. When we edit a particular section of a site, we download the code for that particular section (say /news/ or /movies/ or /wallpapers/ ) from the production server to the dev server, makes the changes locally and uploads to the production server (no code review / testing). Because of this, our dev server is always out of date from our prod server. Occasionally, this also create problem when one of us forgets to download the latest copy from prod and overwrites the last change. I know this is very very foolish, but currently our prod server is the only copy that has all the updates and latest changes. Can anyone please suggest which is the best version control system for me? I am more interested in distributed version control, since we don't have a central backup for all our code. I read about Mercurial and Git and found that Mercurial is used in several large open source projects by Mozilla, Sun, Symbian etc. So which one do you think is better for me? Not only version control, if there are any other package that I can use to make my current setup better, please mention that too :) Thanks and Regards, Vinod Mohan

  Read the article

• Map large integer to a phrase

  - by Alexander Gladysh

  I have a large and "unique" integer (actually a SHA1 hash). I want (for no other reason than to have fun) to find an algorithm to convert that SHA1 hash to a (pseudo-)English phrase. The conversion should be reversible (i.e., knowing the algorithm, one must be able to convert the phrase back to SHA1 hash.) The possible usage of the generated phrase: the human readable version of Git commit ID, like a motto for a given program version (which is built from that commit). (As I said, this is "for fun". I don't claim that this is very practical — or be much more readable than the SHA1 itself.) A better algorithm would produce shorter, more natural-looking, more unique phrases. The phrase need not make sense. I would even settle for a whole paragraph of nonsense. (Though quality — englishness — of a paragraph should probably be better than for a mere phrase.) A variation: it is OK if I will be able to work only with a part of hash. Say, first six digits is OK. Possible approach: In the past I've attempted to build a probability table (of words), and generate phrases as Markov chains, seeding the generator (picking branches from probability tree), according to the bits I read from the SHA. This was not very successful, the resulting phrases were too long and ugly. I'm not sure if this was a bug, or the general flaw in the algorithm, since I had to abandon it early enough. Now I'm thinking about attempting to solve the problem once again. Any advice on how to approach this? Do you think Markov chain approach can work here? Something else?

  Read the article

• Version control - stubs and mocks

  - by Tesserex

  For the sake of this question, I don't care about the difference between stubs, mocks, dummies, fakes, etc. Let's say I'm working on a project with one other person. I'm working on component A and he is working on component B. They work together, so I stub out B for testing, and he stubs out A. We're working in a DVCS, let's say Git, because that's actually the case here. When it comes time to merge our components together, we need to get the "real" files from my A and his B, but throw away all the fake stuff. During development, it's likely (unless I need to learn how to properly stub things) that the fakes have the same file names and class names as the real thing. So my question is: what is the proper procedure for doing version control on the fakes, and how are the components correctly merged, making sure to grab the real thing and not the fake? I would guess that one way is just do the merge, expect it to say CONFLICT, and then manually delete all the fake code out of the half-merged files. But this sounds tedious and inefficient. Should the fake things not go under VC at all? Should they be ripped out just before merging? Sorry if the answer to this should be obvious or trivial, I'm just looking for a "suggested practice" here.

  Read the article

• How do I add programmatically-generated new files to source control?

  - by Alex Basson

  This is something I've never really understood about source control, specifically Subversion (the only source control I've ever used, which isn't saying much). I'm considering moving to git or Mercurial, so if that affects the answer to my question, please indicate as such. Ok. As I understand it, every time I create a new file, I have to tell SVN about it, so that it knows to add it to the repository and place it under control. Something like: svn add newfile That's fine if I'm the one creating the file: I know I created it, I know its name, I know where it lives, so it's easy to tell SVN about it. But now suppose I'm using a framework of some kind, like Rails, Django, Symfony, etc., and suppose I've already done the initial commit. All of these frameworks create new files programmatically, often many at once, in different directories, etc. etc. How do I tell the source control about these new files? Do I have to hunt each one of them down individually and add them? Is there an easier way? (Or am I possibly misunderstanding something fundamental about source control?)

  Read the article

• Omniauth/Devise/Facebook: Auth route is not recognized

  - by M. Cypher

  I've been working on this problem for 7 hours now, and I still have no idea. Maybe one of you can help me. I'm simply trying to integrate the OAuth feature of Devise 1.2rc, which uses Omniauth, into my Rails application. I've been using this tutorial by Devise: https://github.com/plataformatec/devise/wiki/OmniAuth%3A-Overview I have done everything they tell you to... Yes, I have added the following line to my devise.rb: config.omniauth :facebook, "APP ID", "APP SECRET" I have added :omniauthable to my user model, as well as the class function as described in the tutorial I have implemented the omniauth_callbacks controller, as well as the callback function, and I have specified the omniauth_callbacks controller in my routes.rb When I run "rake middleware" it does list the Omniauth middleware: use OmniAuth::Strategies::Facebook I have installed Devise directly from the Git repo, master branch, so it's up-to-date I have installed Omniauth 1.2.0.beta5, which is the latest version. In my Gemfile it says: gem 'oa-oauth', '0.2.0.beta5', :require = 'omniauth/oauth' I have restarted the server, obviously However, when I try to request this URL: http://localhost:3000/auth/facebook it simply says ActionController::RoutingError (No route matches "/auth/facebook"): /user/auth/facebook doesn't work either. Since I unfortunately don't have the time to take apart the entire Omniauth and Devise gems and understand every line of code in them, maybe one of you could tell me what the problem might be.

  Read the article

• Eclipse (Aptana) Typing Lag

  - by Zack

  Hello SO, I've been using Aptana for some time now, and as of recent I've been dealing with files that are really, really big (500+ lines of code, which is huge for me, being a novice developer). Whenever I deal with smaller files, I get that weird sensation that I'm "in front of" what's typing, but now I'm quite sure of it--there is a significant lag between when I type something and when I see the text appear on screen. I don't have this issue with Dreamweaver CS3, so I know my computer has the capability to edit these files without this happening, but Eclipse still lags. I also don't see when something is being deleted if I hold down backspace, I see the first few characters get deleted, but then everything "hangs." Once I release the backspace key, the characters that would've been shown deleting instantly vanish all at once. The same thing happens with the forward delete key. I'm beginning to think this is an issue with Java, since I have the same feeling that everything is slightly "behind me" when I'm using -any- Java application. The computer is an intel Pentium 4 3.2 GHz Prescott, with 2GB's of DDR400 RAM and a Radeon HD3650 graphics card. If anyone knows how to fix this lagging issue, I'm all ears (eyes?); if anyone can recommend a different IDE with capabilities similar to Aptana (I do Python, HTML, CSS and JS; I use Git for SCM), I'd be glad to give it a try. Thanks!

  Read the article

• Working with mongodb from Java

  - by demas

  I have launch mongodb server: [[email protected]][~]% mongod --dbpatmongod --dbpath /home/demas/temp/ Mon Apr 19 09:44:18 Mongo DB : starting : pid = 4538 port = 27017 dbpath = /home/demas/temp/ master = 0 slave = 0 32-bit ** NOTE: when using MongoDB 32 bit, you are limited to about 2 gigabytes of data ** see http://blog.mongodb.org/post/137788967/32-bit-limitations for more Mon Apr 19 09:44:18 db version v1.4.0, pdfile version 4.5 Mon Apr 19 09:44:18 git version: nogitversion Mon Apr 19 09:44:18 sys info: Linux arch.local.net 2.6.33-ARCH #1 SMP PREEMPT Mon Apr 5 05:57:38 UTC 2010 i686 BOOST_LIB_VERSION=1_41 Mon Apr 19 09:44:18 waiting for connections on port 27017 Mon Apr 19 09:44:18 web admin interface listening on port 28017 I have created documents by console client: [[email protected]][~]% mongo MongoDB shell version: 1.4.0 url: test connecting to: test type "help" for help > db.some.find(); { "_id" : ObjectId("4bcbef3c3be43e9b7e04ef3d"), "name" : "mongo" } { "_id" : ObjectId("4bcbef423be43e9b7e04ef3e"), "x" : 3 } Now I am trying to work with MongoDb from Java: import com.mongodb.*; import java.net.UnknownHostException; public class test1 { public static void main(String[] args) { System.out.println("Start"); try { Mongo m = new Mongo("localhost", 27017); DB db = m.getDB("test"); DBCollection coll = db.getCollection("some"); coll.insert(makeDocument(10, "James", "male")); System.out.println("Finish"); } catch (UnknownHostException ex) { ex.printStackTrace(); } catch (MongoException ex) { ex.printStackTrace(); } } public static BasicDBObject makeDocument(int id, String name, String gender) { BasicDBObject doc = new BasicDBObject(); doc.put("id", id); doc.put("name", name); doc.put("gender", gender); return doc; } } But execution stops on line coll.insert(): [[email protected]][~/dev/study/java/mongodb]% javac test1.java [[email protected]][~/dev/study/java/mongodb]% java test1 Start There are not messages from mogodb server regarding accepted connection. Why?

  Read the article

• How to build Android for Samsung Galaxy Note

  - by Tr?n Ð?i

  I'd like to modify and build my own Android for my Samsung Galaxy Note I've downloaded Android 4.1.2 from http://source.android.com and Samsung open source for my Samsung Galaxy Note. After extract Samsung open source, I get 2 folders: Kernel and Platform, and 2 README text file README_Kernel.txt 1. How to Build - get Toolchain From android git server , codesourcery and etc .. - arm-eabi-4.6 - edit build_kernel.sh edit "CROSS_COMPILE" to right toolchain path(You downloaded). EX) CROSS_COMPILE= $(android platform directory you download)/android/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi- Ex) CROSS_COMPILE=/usr/local/toolchain/arm-eabi-4.6/bin/arm-eabi- // check the location of toolchain - execute Kernel script $ ./build_kernel.sh 2. Output files - Kernel : arch/arm/boot/zImage - module : drivers/*/*.ko 3. How to Clean $ make clean README_Platform.txt [Step to build] 1. Get android open source. : version info - Android 4.1 ( Download site : http://source.android.com ) 2. Copy module that you want to build - to original android open source If same module exist in android open source, you should replace it. (no overwrite) # It is possible to build all modules at once. 3. You should add module name to 'PRODUCT_PACKAGES' in 'build\target\product\core.mk' as following case. case 1) bluetooth : should add 'audio.a2dp.default' to PRODUCT_PACKAGES case 2) e2fsprog : should add 'e2fsck' to PRODUCT_PACKAGES case 3) libexifa : should add 'libexifa' to PRODUCT_PACKAGES case 4) libjpega : should add 'libjpega' to PRODUCT_PACKAGES case 5) KeyUtils : should add 'libkeyutils' to PRODUCT_PACKAGES case 6) bluetoothtest\bcm_dut : should add 'bcm_dut' to PRODUCT_PACKAGES ex.) [build\target\product\core.mk] - add all module name for case 1 ~ 6 at once PRODUCT_PACKAGES += \ e2fsck \ libexifa \ libjpega \ libkeyutils \ bcm_dut \ audio.a2dp.default 4. In case of 'bluetooth', you should add following text in 'build\target\board\generic\BoardConfig.mk' BOARD_HAVE_BLUETOOTH := true BOARD_HAVE_BLUETOOTH_BCM := true 5. excute build command ./build.sh user What I need to do after followed 2 above files

  Read the article

• DotNetOpenAuth occasionally throws a NotImplementedException

  - by Chris Moschini

  I have DotNetOpenAuth running on a background thread making calls to Google authorized with OAuth on a regular basis. About once a day, which is about one in 10,000 calls, I get the following Exception: An unhandled exception occurred and the process was terminated. Application ID: DefaultDomain Process ID: 3316 Exception: System.NotImplementedException Message: The method or operation is not implemented. StackTrace: at DotNetOpenAuth.Messaging.ProtocolException.GetObjectData(SerializationInfo info, StreamingContext context) in c:\Users\andarno\git\dotnetopenid\src\DotNetOpenAuth\Messaging\ProtocolException.cs:line 90 at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitSerialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter, SerializationBinder binder) at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.Serialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter, SerializationBinder binder) at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Serialize(Object graph, Header[] inHeaders, __BinaryWriter serWriter, Boolean fCheck) at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Serialize(Stream serializationStream, Object graph, Header[] headers, Boolean fCheck) at System.Runtime.Remoting.Channels.CrossAppDomainSerializer.SerializeObject(Object obj, MemoryStream stm) at System.AppDomain.Serialize(Object o) at System.AppDomain.MarshalObject(Object o) If it was thrown and caught once a day I'd be fine, but this is a big one - I'm getting this in the Application Error log on the server, and it's crashing the process entirely - the site goes down and restarts. Has anyone else run into this? Something I'm clearly doing wrong?

  Read the article

• fastest SCM tool available for Embedded software development

  - by wrapperm

  Hi All, In my company, presently we are using Rational clearcase as the Software Configuration Management tool for our Embedded software development. The software is basically for Automobiles, to be specific for Engines (I dont think these information really matters). But I find Clearcase to be very slow is performing any the activities (accesing files, branching and labelling), in addition to which there are various other limitations. We have recently decided to research on some free & open source, distributed version control system which could be able to handle our large projects with speed and efficiency. This tool should be a full-fledged repository with complete history and full revision tracking capabilities, not dependent on network access or a central server. Branching and merging are fast and easy to do. It should have multisite development facility. With these above mentioned requirement, we have come up with some of the tools that are presently available in the market: GIT, Mercurial, Bazaar, Subversion, CVS, Perforce, and Visual SourceSafe. I need everybody's help in finding me an approrpiate SCM tool for me which meets the above mentioned requirements. Thanking you in Advance, Rahamath.

  Read the article

• Single developer, project organization

  - by poke

  I am looking for a good (and free) way to organize some of my personal projects. I am saying "organize" because I'm not sure, if the standard project management software solutions are exactly what I am looking for and especially something what I, as a single developer, need. In general, I just want to keep my progress of my projects organized in some way. I would like to be able to keep track of milestones and split those into multiple smaller tasks, so I can keep track of my progress. So some task/issue based system would probably be good, especially as I also want to keep track of issues/bugs with specific versions (although I alone will create those issues). I am and will be the only developer on those projects, so it doesn't matter if the software is offline or online, and I also don't need any collaboration features (like commenting on things, or assigning tasks to other developers etc). But if there is a good software that fits my needs, and in addition it has those things, I don't really care. After all it's easy enough to not use available features. Many online solutions also offer integrated code hosting. I am using git internally, but I don't plan to push any of the code, so such a feature is not needed either. In case of online solutions however I would like the projects to be closed to the public (some of the online utilities only offer open source projects for free and require payments for private projects). I have looked at some project management solutions already, I also read some similar questions here on SO. But given that I'm a single developer, my focus is probably a bit different as when others ask for a huge distributed software that supports many developers and different collaboration features. Some standard answers such as Trac (which also only supports one project), Redmine and FogBUGZ look interesting, but are a bit off my interest (although you may change my mind on that :P). Currently, I'm looking at Indefero which doesn't look too bad. But what do you think?

  Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >