kevin d white - Page 120

Add a small RAID card? Will it help overall stability and performance of my nine hard drives?

- by Ray

Hi, Will I get any extra genuine added performance and RAID stability if I insert a basic RAID card into a PCI-E x1 slot? I am considering the Adaptec 1220SA - 2 port SATA , pci-express (1x) , raid 0/1. Ok it only supports two SATA drives. Purpose is to help support the eight internal hard drives (1TB each), a DVD drive and an external e-SATA connected 2TB hard drive - by dealing with two of the internal hard drives. My current configuration of eight internal 1TB Barracuda (7200.12) SATA hard drives, one external 2TB SATA Western Digital Green Drive (e-SATA) and one DVD drive can already be supported by the Intel P55 & JMicron controllers on the ASUS motherboard : the Intel P55 (controls six HDD; configured as three x RAID 1), and the JMicron (controls two HDD as one RAID 1, as well as the DVD drive and the external SATA drive via the motherboard's e-SATA port (controlled by the JMicron)). Bigger picture details : I have an ASUS motherboard designed for the LGA1156 type processor and it includes the Intel P55 Express Chipset and JMicron. I am using the Intel Core i7-870 processor, and have 8GB DDR3 (1333) memory (four x 2GB Corsair DIMMs). Enough overall power. The power supply is more than sufficicient for the system. Corsair AX850. The system will never need the full 850 watts (future : second graphics card). The RAID card would provide hardware RAID 1 for two of the eight intrnal drives. It would either reduce the load on : the Intel P55 firmware RAID support, or replace the JMicron controller's RAID 1 set. I am busy installing the above configuration using Windows 7 Ultimate 64-bit as the OS. The RAID card is a last minute addition to the plan. Is it worth spending the extra R700 - R900 on the Adaptec 1220SA, or equivalent RAID card? I cannot afford to spend yet another R2000 - R3000 on a RAID card that would support many SATA2 hard drives, with a better RAID, example the RAID 5. My Issue & assumption : I am trusting that the Intel P55 chipset can properly handle six drives, configured as three * RAID 1. I am assuming that the JMicron can handle, using its RED SATA ports, one RAID-1 (two HDDs). The DVD drive connects to the JMicron optical SATA port 1 (white port 1). White port 2 is not used. The e-SATA connection is from the JMicron straight to, and through the motherboard - to an on-board (rear panel) e-SATA port. Am I being a little hopeful in only using the on-board Intel P55 and the JMicron? Is it a waste of money to install a RAID card that handles two SATA2 drives? OR Is it wisdom to take the pressure a little off the Intel P55? Obviously I am interested in data security, hence RAID 1, not RAID Zero. RAID 5 would be nice. The CPU, Intel Core i7-870 will provide the clout. Context to nine drives : I am using virtualisation with Windows 7 Ultimate. Bootable VMs. The operating system gets a mirror. Loaded apps gets a mirror. The current design data is kept in another mirror and Another mirror is back-up one and / or VM territory. Then the external 2TB drive (via e-SATA) is the next layer of data security and then finally, I use off-site data security. Thanks.

Read the article

10 Best Programming Podcast 2010 Edition

- by mbcrump

This list is in no particular order. Just the 10 best programming podcast that I have found so far. Stack Overflow Podcast - Jeff Atwood (of codinghorror.com) and Joel Spolsky (of joelonsoftware.com) discuss the development of their new programming community, StackOverflow.com. [This Podcast hasn’t been updated in a while, but its always great to hear more from Jeff Atwood] Hanselminutes - Hanselminutes is a weekly audio talk show with noted web developer and technologist Scott Hanselman and hosted by Carl Franklin. Scott discusses utilities and tools, gives practical how-to advice, and discusses ASP.NET or Windows issues and workarounds. [This Podcast has recently started talking about random topics like diabetes, plane travel and geek relationship tips. I am not sure if Scott is trying to move to a more mainstream audience or not] Herding Code - A weekly discussion featuring K. Scott Allen (odetocode.com), Kevin Dente, Scott Koon (lazycoder.com), and Jon Galloway. [Great all all-around podcast that I would recommend to all] Deep Fried Bytes - Deep Fried Bytes is an audio talk show with a Southern flavor hosted by technologists and developers Keith Elder and Chris Woodruff. The show discusses a wide range of topics including application development, operating systems and technology in general. Anything is fair game if it plugs into the wall or takes a battery. [This is one that just keeps getting better] Dot Net Rocks - .NET Rocks! is an Internet Audio Talk Show for Microsoft .NET Developers. [One of the first and usually very high quality content] Connected Show - Connected Show Podcast! A podcast covering new Microsoft technology for the developer community. The show is hosted by Dmitry Lyalin and Peter Laudati. [This and Polymorphic are one of my favorite podcast – Dmitry is a great host and would recommend this to all] Polymorphic Podcast - Object oriented development, architecture and best practices in .NET [Craig is a ASP.NET MVP and a great presenter. His podcast is great and it could only be better if he recorded it more often] ASP.NET Podcast - Wallace B. (Wally) McClure presents interviews and short technical talks on .NET Technologies. [Has great information on ASP.NET of course as well as iPhone Dev] Ruby on Rails Podcast - News and interviews about the Ruby language and the Rails website framework. [Even though I am not a Ruby programmer, I’ve found this podcast very interesting] Software Engineering Radio - Software Engineering Radio is a podcast targeted at the professional software developer. The goal is to be a lasting educational resource, not a newscast. Every ten days, a new episode is published that covers all topics software engineering. Episodes are either tutorials on a specific topic, or an interview with a well-known character from the software engineering world. All SE Radio episodes are original content ? we do not record conferences or talks given in other venues. Each episode comprises two speakers to ensure a lively listening experience. SE Radio is an independent and non-commercial organization. [Another excellent podcast – I would recommend any programmer add this to his/her drive home] If I have missed something, please feel free to email me and it might make the 2011 list. =)

Read the article

How can we improve overall Programmer Education & Training?

- by crosenblum

Last week, I was just viewing this amazing interview by Kevin Rose of Phillip Rosedale, of Second Life. And they had an amazing discussion about how to find, hire and identify good programmer's, and how hard it is to find good ones. Which has lead me to really think about the way we programmer's learn, are taught. For a majority of us, myself included, we are self-taught. Which is great about being a programmer, anyone can learn and develop skills. But this also means, that there is no real standards of what a good programmer is/are, and what kind of environment's encourage the growth of programming skills. This isn't so much a question, but just a desire in me, to see how we can change the culture of programming, and the manager's of programming, so that education and self-improvement is encouraged. There are a lot of avenue's for continued education, youtube videos, books, conferences, but because of the experiental nature of what we do, it isn't always clear what's important to learn and to master. Let's look at the The Joel 12 Steps. The Joel Test Do you use source control? Can you make a build in one step? Do you make daily builds? Do you have a bug database? Do you fix bugs before writing new code? Do you have an up-to-date schedule? Do you have a spec? Do programmers have quiet working conditions? Do you use the best tools money can buy? Do you have testers? Do new candidates write code during their interview? Do you do hallway usability testing? I think all of these have important value, but because of something I call the Experiential Gap, if a programmer or manager has never experienced any of the negative consequences for not having done items on the list, they will never see the need to do any of them. The Experiental Gap, is my basic theory, that each of us has different jobs and different experiences. So for some of us, that have always worked with dozens of programmer's, source control is a must have. But for people who have always been the only programmer, they can not imagine the need for source control. And it's because of this major flaw in how we learn, that we evaluate people by what best practices they do or not do, and the reason for either can start a flame war. We always evaluate people in our field by what they do, and think "Oh if this guy/gal isn't doing xyz best practice, he/she can't be a good programmer, so let's not waste time or energy talking to them." This is exactly why we have so many programming flame wars, that it becomes, because of the Experiental Gap, we can't imagine people not having made the decisions that we have had to made. So this has lead me to think, that we totally need to rethink how we train, educate and manage programmer's. For example, what percentage of you have had encouragement by your manager's to go to conferences, and even have them pay for it? For me, and a lot of people, this is extremely rare, a lot of us would love to go to conferences, to learn more, but the money ain't there to do that. So the point of this question is really to spark a lot of how can we train, learn and manage better? How can we create a new culture of learning that doesn't insult people for not having the same job experiences. Yes we all have jobs and work to do, but our ability to do our jobs well, depends on our desire, interest and support in improving our mastery of our skills. Right now, I see our culture being rather disorganized, we support the elite, but those tons of us that want to get better, just don't have enough support to learn and improve ourselves. I mean, do we as an industry, want to be perceived as just replaceable cogs? Thank you...

Read the article

Partner outreach on the Oracle Fusion Applications user experience begins

- by mvaughan

by Misha Vaughan, Architect, Applications User Experience I have been asked the question repeatedly since about December of last year: “What is the Applications User Experience group doing about partner outreach?” My answer, at the time, was: “We are thinking about it.” My colleagues and I were really thinking about the content or tools that the Applications UX group should be developing. What would be valuable to our partners? What will actually help grow their applications business, and fits within the applications user experience charter?In the video above, you’ll hear Jeremy Ashley, vice president of the Applications User Experience team, talk about two fundamental initiatives that our group is working on now that speaks straight to partners. Special thanks to Joel Borellis, Kelley Greenly, and Steve Hoodmaker for helping to make this video happen so flawlessly. Steve was responsible for pulling together a day of Oracle Fusion Applications-oriented content, including David Bowin, Director, Fusion Applications Strategy, on some of the basic benefits of Oracle Fusion Applications. Joel Borellis, Group Vice President, Partner Enablement, and David Bowin in the Oracle Studios.Nigel King, Vice President Applications Functional Architecture, was also on the list, talking about co-existence opportunities with Oracle Fusion Applications.Me and Nigel King, just before his interview with Joel. Fusion Applications User Experience 101: Basic education Oracle has invested an enormous amount of intellectual and developmental effort in the Oracle Fusion Applications user experience. Find out more about that at the Oracle Partner Network Fusion Learning Center (Oracle ID required). What you’ll learn will help you uncover how, exactly, Oracle made Fusion General Ledger “sexy,” and that’s a direct quote from Oracle Ace Director Debra Lilley, of Fujitsu. In addition, select Applications User Experience staff members, as well as our own Fusion User Experience Advocates, can provide a briefing to our partners on Oracle’s investment in the Oracle Fusion Applications user experience. Looking forward: Taking the best of the Fusion Applications UX to your customersBeyond a basic orientation to one of the key differentiators for Oracle Fusion Applications, we are also working on partner-oriented training.A question we are often getting right now is: “How do I help customers build applications that look like Fusion?” We also hear: “How do I help customers build applications that take advantage of the next-generation design work done in Fusion?”Our answer to this is training and a tool – our user experience design patterns – these are a set of user experience best-practices. Design patterns are re-usable, usability-tested, user experience components that make creating Fusion Applications-like experiences straightforward. It means partners can leverage Oracle’s investment, but also gain an advantage by not wasting time solving a problem we’ve already solved. Their developers can focus on helping customers tackle the harder development challenges. Ultan O’Broin, an Apps UX team member, and I are working with Kevin Li and Chris Venezia of the Oracle Platform Technology Services team, as well as Grant Ronald in Oracle ADF, to bring you some of the best “how-to” UX training, customized for your local area. Our first workshop will be in EMEA. Stay tuned for an assessment and feedback from the event.

Read the article

OTN ArchBeat Top 10 for September 2012

- by Bob Rhubart

The results are in... Listed below are the Top 10 most popular items shared via the OTN ArchBeat Facebook Page for the month of September 2012. The Real Architects of Los Angeles - OTN Architect Day - Oct 25 No gossip. No drama. No hair pulling. Just a full day of technical sessions and peer interaction focused on using Oracle technologies in today's cloud and SOA architectures. The event is free, but seating is limited, so register now. Thursday October 25, 2012. 8:00 a.m. – 5:00 p.m. Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048. Oracle Fusion Middleware Security: Attaching OWSM policies to JRF-based web services clients "OWSM (Oracle Web Services Manager) is Oracle's recommended method for securing SOAP web services," says Oracle Fusion Middleware A-Team member Andre Correa. "It provides agents that encapsulate the necessary logic to interact with the underlying software stack on both service and client sides. Such agents have their behavior driven by policies. OWSM ships with a bunch of policies that are adequate to most common real world scenarios." His detailed post shows how to make it happen. Oracle 11gR2 RAC on Software Defined Network (SDN) (OpenvSwitch, Floodlight, Beacon) | Gilbert Stan "The SDN [software defined network] idea is to separate the control plane and the data plane in networking and to virtualize networking the same way we have virtualized servers," explains Gil Standen. "This is an idea whose time has come because VMs and vmotion have created all kinds of problems with how to tell networking equipment that a VM has moved and to preserve connectivity to VPN end points, preserve IP, etc." H/T to Oracle ACE Director Tim Hall for the recommendation. Process Oracle OER Events using a simple Web Service | Bob Webster Bob Webster's post "provides an example of a simple web service that processes Oracle Enterprise Repository (OER) Events. The service receives events from OER and utilizes the OER REX API to implement simple OER automations for selected event types." Understanding Oracle BI 11g Security vs Legacy Oracle BI 10g | Christian Screen "After conducting a large amount of Oracle BI 10g to Oracle BI 11g upgrades and after writing the Oracle BI 11g book,"says Oracle ACE Christian Screen, "I still continually get asked one of the most basic questions regarding security in Oracle BI 11g; How does it compare to Oracle BI 10g? The trail of questions typically goes on to what are the differences? And, how do we leverage our current Oracle BI 10g security table schema in Oracle BI 11g?" OIM-OAM-OAAM integration using TAP – Request Flow you must understand!! | Atul Kumar Atul Kumar's post addresses "key points and request flow that you must understand" when integrating three Oracle Identity Management product Oracle Identity Management, Oracle Access Management, and Oracle Adaptive Access Manager. Adding a runtime LOV for a taskflow parameter in WebCenter | Yannick Ongena Oracle ACE Yannick Ongena illustrates how to customize the parameters tab for a taskflow in WebCenter. Tips on Migrating from AquaLogic .NET Accelerator to WebCenter WSRP Producer for .NET | Scott Nelson "It has been a very winding path and this blog entry is intended to share both the lessons learned and relevant approaches that led to those learnings," says Scott Nelson. "Like most journeys of discovery, it was not a direct path, and there are notes to let you know when it is practical to skip a section if you are in a hurry to get from here to there." 15 Lessons from 15 Years as a Software Architect | Ingo Rammer In this presentation from the GOTO Conference in Copenhagen, Ingo Rammer shares 15 tips regarding people, complexity and technology that he learned doing software architecture for 15 years. WebCenter Content (WCC) Trace Sections | ECM Architect ECM Architect Kevin Smith shares a detailed technical post covering WebCenter Content (WCC) Trace Sections. Thought for the Day "Eventually everything connects - people, ideas, objects. The quality of the connections is the key to quality per se." — Charles Eames (June 17, 1907 – August 21, 1978) Source: SoftwareQuotes.com

Read the article

Get the Picture: Pinterest for Marketers

- by Mike Stiles

When trying to determine on which networks to conduct social marketing, the usual suspects immediately rise to the top; Facebook & Twitter, then LinkedIn (especially if you’re B2B), then maybe some Google Plus to hedge SEO bets. So at what juncture do brands get excited about Pinterest? Pinterest has been easy for marketers to de-prioritize thanks to the perception its usage is so dominated by women. Um, what’s wrong with that? Women make an estimated 85% of all consumer purchases. So if there are indeed over 30 million US women active on it monthly, and they do 92% of the pinning, and 84% are still active on it after 4 years, when did an audience of highly engaged, very likely sales conversions become low priority? Okay, if you’re a tech B2B SaaS product like the Oracle Social Cloud, Pinterest may not be where you focus. But if you operate in the top Pinterest categories, which are truly far-reaching, it’s time to take note of Pinterest’s performance to date: 40.1 million monthly users in the US (eMarketer). Over 30 billion pins, half of which were pinned in the last 6 months. (Big momentum) 75% of usage is on their mobile app. (In solid shape for the mobile migration) Pinterest sharing grew 58% in 2013, beating Facebook, Twitter, or LinkedIn. (ShareThis) Pinterest is the 3rd most popular sharing platform overall (over email), with 48% of all sharing on tablets. Users referred by Pinterest are 10% more likely to buy on e-commerce sites and tend to spend twice that of users coming from Facebook. (Shopify) To be fair, brands haven’t had any paid marketing opportunities on that platform…until recently. Users are seeing Promoted Pins in both category and search feeds from rollout brands like Gap, ABC Family, Ziploc, and Nestle. Are the paid pins annoying users? It seems more so than other social networks, they’re fitting right in to the intended user experience and being accepted, getting almost as many click-throughs as user pins. New York Magazine’s Kevin Roose laid it out succinctly; Pinterest offers a place that’s image-centric, search-friendly, makes things easy to purchase, makes things easy to share, and puts users in an aspirational mood to buy. Pinterest is very confident in the value of that combo and that audience, with CPM rates 5x that of the most expensive Facebook ad, plus (at least for now) required spending commitments and required pin review by Pinterest for quality. The latest developments; a continued move toward search and discovery with enhancements like Guided Search to help you hone in on what interests you, Custom Categories, and the rumored Visual Search that stands to be a liberation from text. And most recently, Pinterest has opened up its API so brands can get access to deeper insights into the best search terms and categories in which to play ball, as well as what kinds of pins stand to perform best in those areas. As we learned in our rundown this week of Social Media Examiner’s Social Media Marketing Industry Report, around 50% of marketers specifically intend on upping their use of Pinterest. If you’re a big believer in fishing where the fish are, that’s probably an efficient position to take. @mikestiles @oraclesocialPhoto: Adam Lambert_Gorwyn, freeimages.com

Read the article

Oracle at ARM TechCon

- by Tori Wieldt

ARM TechCon is a technical conference for hardware and software engineers, Oct. 30-Nov 1 in Santa Clara, California. Days two and three of the conference will be geared towards systems designers and software developers, those interested in building ARM processor-based modules, boards, and systems. It will cover all of the hardware and software, tools, ranging from low-power design, networking and connectivity, open source software, and security. Oracle is a sponsor of ARM TechCon, and will present three Java sessions and a hands-on-lab: "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi" - The Raspberry Pi, an ARM-powered single board computer running a full Linux distro off an SD card has caused a huge wave of interest among developers. This session looks at how Java can be used on a device such as this. Using Java SE for embedded devices and a port of JavaFX, the presentation includes a variety of demonstrations of what the Raspberry Pi is capable of. The Raspberry Pi also provides GPIO line access, and the session covers how this can be used from Java applications. Prepare to be amazed at what this tiny board can do. (Angela Caicedo, Java Evangelist) "Modernizing the Explosion of Advanced Microcontrollers with Embedded Java" - This session explains why Oracle Java ME Embedded is the right choice for building small, connected, and intelligent embedded solutions, such as industrial control applications, smart sensing, wireless connectivity, e-health, or general machine-to-machine (M2M) functionality---extending your business to new areas, driving efficiency, and reducing cost. The new Oracle Java ME Embedded product brings the benefits of Java technology to microcontroller platforms. It is a full-featured, complete, compliant software runtime with value-add features targeted to the embedded space and has the ability to interface with additional hardware components, remote manageability, and over-the-air software updates. It is accompanied by a feature-rich set of tools free of charge. (Fareed Suliman, Java Product Manager) "Embedded Java in Smart Energy and Healthcare" - This session covers embedded Java products and technologies that enable smart and connect devices in the Smart Energy and Healthcare/Medical industries. (speaker Kevin Lee) "Java SE Embedded Development on ARM Made Easy" - This Hands-on Lab aims to show that developers already familiar with the Java develop/debug/deploy lifecycle can apply those same skills to develop Java applications, using Java SE Embedded, on embedded devices. (speaker Jim Connors) In the Oracle booth #603, you can see the following demos: Industry Solutions with JavaThis exhibit consists of a number of industry solutions and how they can be powered by Java technology deployed on embedded systems. Examples in consumer devices, home gateways, mobile health, smart energy, industrial control, and tablets all powered by applications running on the Java platform are shown. Some of the solutions demonstrate the ability of Java to connect intelligent devices at the edge of the network to the datacenter or the cloud as a total end-to-end platform.Java in M2M with QualcommThis station will exhibit a new M2M solutions platform co-developed by Oracle and Qualcomm that enables wireless communications for embedded smart devices powered by Java, and share the types of industry solutions that are possible. In addition, a new platform for wearable devices based on the ARM Cortex M3 platform is exhibited.Why Java for Embedded?Demonstration platforms will show how traditional development environments, tools, and Java programming skills can be used to create applications for embedded devices. The advantages that Java provides because of the runtime's abstraction of software from hardware, modularity and scalability, security, and application portability and manageability are shared with attendees. Drop by and see why Java is an optimal applications platform for embedded systems.

Read the article

java.lang.IllegalAccessException during Ant jwsc webservice build

- by KevB

Hi. I have a large application, part of which relies on a set of 3 webservices. I'm currently in the process of writing an Ant build script to build and package the application into an EAR file. When building the web sub-project for this application I use the <jwsc> task in Ant to compile the webservices. This causes an IllegalAccessException, as outlined in the stack trace below: [jwsc] warning: 'includeantruntime' was not set, defaulting to build.sysclasspath=last; set to false for repeatable builds [jwsc] JWS: processing module weboutput [jwsc] Parsing source files [jwsc] Parsing source files [jwsc] 3 JWS files being processed for module weboutput [jwsc] JWS: C:\dev\ir\irWeb\src\webservices\DailyRun.java Validated. [jwsc] JWS: C:\dev\ir\irWeb\src\webservices\PendingRegistrationsSweep.java Validated. [jwsc] JWS: C:\dev\ir\irWeb\src\webservices\RegistrationsGoLive.java Validated. [jwsc] Compiling 6 source files to C:\DOCUME~1\KEVIN~1.BRE\LOCALS~1\Temp\_5l950r [jwsc] An exception has occurred in the compiler (1.6.0_23). Please file a bug at the Java Developer Connection (http://java.sun.com/webapps/bugreport) after checking the Bug Parade for duplicates. Include your program and the following diagnostic in your report. Thank you. [jwsc] java.lang.IllegalAccessError: tried to access class com.sun.tools.javac.jvm.ClassReader$AnnotationDefaultCompleter from class com.sun.tools.javac.jvm.ClassReader [jwsc] at com.sun.tools.javac.jvm.ClassReader.attachAnnotationDefault(ClassReader.java:1128) [jwsc] at com.sun.tools.javac.jvm.ClassReader.readMemberAttr(ClassReader.java:906) [jwsc] at com.sun.tools.javac.jvm.ClassReader.readMemberAttrs(ClassReader.java:1027) [jwsc] at com.sun.tools.javac.jvm.ClassReader.readMethod(ClassReader.java:1490) [jwsc] at com.sun.tools.javac.jvm.ClassReader.readClass(ClassReader.java:1586) [jwsc] at com.sun.tools.javac.jvm.ClassReader.readClassFile(ClassReader.java:1658) [jwsc] at com.sun.tools.javac.jvm.ClassReader.fillIn(ClassReader.java:1845) [jwsc] at com.sun.tools.javac.jvm.ClassReader.complete(ClassReader.java:1777) [jwsc] at com.sun.tools.javac.code.Symbol.complete(Symbol.java:386) [jwsc] at com.sun.tools.javac.code.Symbol$ClassSymbol.complete(Symbol.java:763) [jwsc] at com.sun.tools.javac.jvm.ClassReader.loadClass(ClassReader.java:1951) [jwsc] at com.sun.tools.javac.comp.Resolve.loadClass(Resolve.java:842) [jwsc] at com.sun.tools.javac.comp.Resolve.findIdentInPackage(Resolve.java:1011) [jwsc] at com.sun.tools.javac.comp.Attr.selectSym(Attr.java:1921) [jwsc] at com.sun.tools.javac.comp.Attr.visitSelect(Attr.java:1835) [jwsc] at com.sun.tools.javac.tree.JCTree$JCFieldAccess.accept(JCTree.java:1522) [jwsc] at com.sun.tools.javac.comp.Attr.attribTree(Attr.java:360) [jwsc] at com.sun.tools.javac.comp.Attr.attribType(Attr.java:390) [jwsc] at com.sun.tools.javac.comp.MemberEnter.attribImportType(MemberEnter.java:681) [jwsc] at com.sun.tools.javac.comp.MemberEnter.visitImport(MemberEnter.java:545) [jwsc] at com.sun.tools.javac.tree.JCTree$JCImport.accept(JCTree.java:495) [jwsc] at com.sun.tools.javac.comp.MemberEnter.memberEnter(MemberEnter.java:387) [jwsc] at com.sun.tools.javac.comp.MemberEnter.memberEnter(MemberEnter.java:399) [jwsc] at com.sun.tools.javac.comp.MemberEnter.visitTopLevel(MemberEnter.java:512) [jwsc] at com.sun.tools.javac.tree.JCTree$JCCompilationUnit.accept(JCTree.java:446) [jwsc] at com.sun.tools.javac.comp.MemberEnter.memberEnter(MemberEnter.java:387) [jwsc] at com.sun.tools.javac.comp.MemberEnter.complete(MemberEnter.java:819) [jwsc] at com.sun.tools.javac.code.Symbol.complete(Symbol.java:386) [jwsc] at com.sun.tools.javac.code.Symbol$ClassSymbol.complete(Symbol.java:763) [jwsc] at com.sun.tools.javac.comp.Enter.complete(Enter.java:464) [jwsc] at com.sun.tools.javac.comp.Enter.main(Enter.java:442) [jwsc] at com.sun.tools.javac.main.JavaCompiler.enterTrees(JavaCompiler.java:819) [jwsc] at com.sun.tools.javac.main.JavaCompiler.compile(JavaCompiler.java:727) [jwsc] at com.sun.tools.javac.main.Main.compile(Main.java:353) [jwsc] at com.sun.tools.javac.main.Main.compile(Main.java:279) [jwsc] at com.sun.tools.javac.main.Main.compile(Main.java:270) [jwsc] at com.sun.tools.javac.Main.compile(Main.java:69) [jwsc] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) [jwsc] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.taskdefs.compilers.Javac13.execute(Javac13.java:56) [jwsc] at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:1097) [jwsc] at weblogic.wsee.tools.anttasks.DelegatingJavacTask$ExposingJavac.compile(DelegatingJavacTask.java:343) [jwsc] at weblogic.wsee.tools.anttasks.DelegatingJavacTask.compile(DelegatingJavacTask.java:286) [jwsc] at weblogic.wsee.tools.anttasks.JwscTask.javac(JwscTask.java:335) [jwsc] at weblogic.wsee.tools.anttasks.JwsModule.compile(JwsModule.java:390) [jwsc] at weblogic.wsee.tools.anttasks.JwsModule.build(JwsModule.java:262) [jwsc] at weblogic.wsee.tools.anttasks.JwscTask.execute(JwscTask.java:227) [jwsc] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291) [jwsc] at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.Task.perform(Task.java:348) [jwsc] at org.apache.tools.ant.Target.execute(Target.java:390) [jwsc] at org.apache.tools.ant.Target.performTasks(Target.java:411) [jwsc] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1397) [jwsc] at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38) [jwsc] at org.apache.tools.ant.Project.executeTargets(Project.java:1249) [jwsc] at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:442) [jwsc] at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:105) [jwsc] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291) [jwsc] at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.Task.perform(Task.java:348) [jwsc] at org.apache.tools.ant.Target.execute(Target.java:390) [jwsc] at org.apache.tools.ant.Target.performTasks(Target.java:411) [jwsc] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1397) [jwsc] at org.apache.tools.ant.Project.executeTarget(Project.java:1366) [jwsc] at com.bea.workshop.cmdline.antlib.AntExTask.execute(AntExTask.java:406) [jwsc] at com.bea.workshop.cmdline.antlib.AntCallExTask.execute(AntCallExTask.java:118) [jwsc] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291) [jwsc] at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.Task.perform(Task.java:348) [jwsc] at org.apache.tools.ant.Target.execute(Target.java:390) [jwsc] at org.apache.tools.ant.Target.performTasks(Target.java:411) [jwsc] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1397) [jwsc] at org.apache.tools.ant.Project.executeTarget(Project.java:1366) [jwsc] at com.bea.workshop.cmdline.antlib.AntExTask.execute(AntExTask.java:406) [jwsc] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291) [jwsc] at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.Task.perform(Task.java:348) [jwsc] at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:68) [jwsc] at net.sf.antcontrib.logic.IfTask.execute(IfTask.java:217) [jwsc] at sun.reflect.GeneratedMethodAccessor44.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.TaskAdapter.execute(TaskAdapter.java:154) [jwsc] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291) [jwsc] at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.Task.perform(Task.java:348) [jwsc] at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:68) [jwsc] at net.sf.antcontrib.logic.IfTask.execute(IfTask.java:197) [jwsc] at sun.reflect.GeneratedMethodAccessor44.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.TaskAdapter.execute(TaskAdapter.java:154) [jwsc] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291) [jwsc] at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.Task.perform(Task.java:348) [jwsc] at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:68) [jwsc] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291) [jwsc] at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.Task.perform(Task.java:348) [jwsc] at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.java:398) [jwsc] at net.sf.antcontrib.logic.ForTask.doSequentialIteration(ForTask.java:259) [jwsc] at net.sf.antcontrib.logic.ForTask.doToken(ForTask.java:268) [jwsc] at net.sf.antcontrib.logic.ForTask.doTheTasks(ForTask.java:299) [jwsc] at net.sf.antcontrib.logic.ForTask.execute(ForTask.java:244) [jwsc] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291) [jwsc] at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.Task.perform(Task.java:348) [jwsc] at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:68) [jwsc] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291) [jwsc] at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.Task.perform(Task.java:348) [jwsc] at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.java:398) [jwsc] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291) [jwsc] at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.Task.perform(Task.java:348) [jwsc] at org.apache.tools.ant.Target.execute(Target.java:390) [jwsc] at org.apache.tools.ant.Target.performTasks(Target.java:411) [jwsc] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1397) [jwsc] at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38) [jwsc] at org.apache.tools.ant.Project.executeTargets(Project.java:1249) [jwsc] at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:442) [jwsc] at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:105) [jwsc] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291) [jwsc] at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) [jwsc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [jwsc] at java.lang.reflect.Method.invoke(Method.java:597) [jwsc] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [jwsc] at org.apache.tools.ant.Task.perform(Task.java:348) [jwsc] at org.apache.tools.ant.Target.execute(Target.java:390) [jwsc] at org.apache.tools.ant.Target.performTasks(Target.java:411) [jwsc] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1397) [jwsc] at org.apache.tools.ant.Project.executeTarget(Project.java:1366) [jwsc] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41) [jwsc] at org.apache.tools.ant.Project.executeTargets(Project.java:1249) [jwsc] at org.apache.tools.ant.Main.runBuild(Main.java:801) [jwsc] at org.apache.tools.ant.Main.startAnt(Main.java:218) [jwsc] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280) [jwsc] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109) [AntUtil.deleteDir] Deleting directory C:\DOCUME~1\KEVIN~1.BRE\LOCALS~1\Temp_5l950r The Ant target that uses the <jwsc> task is this: <target name="webservice.build" depends="init,generated.root.init"> <path id="jwsc.srcpath"> <path path="${java.sourcepath}" /> <pathelement path="build/assembly/.src" /> </path> <taskdef name="jwsc" classname="weblogic.wsee.tools.anttasks.JwscTask" > <classpath> <path refid="weblogic.jar.classpath" /> </classpath> </taskdef> <property name="jwsc.module.root" value="${project.dir}/build/weboutput"/> <property name="jwsc.contextpath" value="irWeb"/> <property name="jwsc.srcpath.prop" refid="jwsc.srcpath"/> <path id="jwsc.classpath"> <path refid="weblogic.jar.classpath" /> <path refid="java.classpath" /> <pathelement path="${java.outpath}" /> </path> <jwsc destdir="${project.dir}/build" classpathref="jwsc.classpath"> <module name="weboutput" explode="true" contextPath="${jwsc.contextpath}" > <jwsFileSet srcdir="${webservices.dir}" type="JAXRPC"> <include name="**/*.java"/> </jwsFileSet> <descriptor file="${jwsc.module.root}/WEB-INF/web.xml" /> <descriptor file="${jwsc.module.root}/WEB-INF/weblogic.xml" /> </module> </jwsc> </target> I have no idea what could be causing the compiler to throw this error at build time, and a day of google searching has turned up other instances of this error caused by different triggers, and solutions for those propblems didn't work for me. I also found a single report on the Oracle forums that seemed to be a carbon copy of this issue, but there were no replies. The application is written in Weblogic Workshop 10, runs on Weblogic Server 10.3, and uses Beehive / NetUI. Not sure if that would make a difference or not though. The build scripts were automatically generated by Weblogic Workshop, with some tweaks and fixes made to other aspects of the files by myself to fix other compatability issues. I am using Java 1.6.0_23 from Sun, and Ant 1.8.1 Any help or advice would be greatly appreciated.

Read the article

jBPM 4.3 Task Notification tag being ignored

- by user291780

I have a task with a notification entry but no emails are being generated and no entries in logs. Emails from mail node work fine. What am I doing wrong? Do I have to do anything special to my custom AssignmentHandler impl for notifications? <mail g="216,156,80,40" name="Send email"> <to addresses="[email protected]" /> <subject>Testing the mail activity</subject> <text>This message was sent by the jBPM mail activity tester</text> <transition g="-78,-18" to="User Review" /> </mail> <task g="210,250,92,52" name="User Review"> <description>User Review Task Description</description> <assignment-handler class="com.kevinmoodley.BPMTaskAssignmentHandler"> <description>Review AI Process Failure Assignment Handler</description> </assignment-handler> <notification> <to addresses="[email protected]" /> <subject>Testing from task</subject> <text>This message was sent by the jBPM User Review task</text> </notification> <transition g="-42,-18" name="CANCEL" to="end1" /> <transition g="-42,-18" name="RESTART" to="end2" /> </task> Thanks Kevin

Read the article

Append to a webpage in javascript

- by Lily

What I want to do is that: a webpage with continuously updating content. (In my case is updating every 2s) New content is appended to the old one instead of overwriting the old one. Here is the code I have: var msg_list = new Array( "<message>Hello, Clare</message>", "<message>Hello,Lily</message>", "<message>Hello, Kevin</message>", "<message>Hello, Bill</message>" ); var number = 0; function send_msg() { document.write(number + " " + msg_list[number%4]+'<br/>'); number = number + 1; } var my_interval = setInterval('send_msg()', 2000); However, in both IE and Firefox, only one line is printed out, and the page will not be updated anymore. Interestingly in Chrome, the lines being printed out continuously, which is what I am looking for. I know that document.write() is called when the page is loaded according to this. So it's definitely not the way to update the webpage continuously. What will be the best way to achieve what I want to do? Totally newbie in Javascript. Thank you. Lily

Read the article

Question about using adaptive layout + print style sheet

- by Michael

Hey everyone, In my web design class, we looked at creating different style sheets for different window sizes and using a javascript that detects the window size and loads the right style sheet. In the head, I'm linking to three external style sheets, as well as a link to the javascript file. So the adaptive layout works fine. However... I also need to be able to use a print style sheet with this particular webpage (it's the requirement for this project). The problem is this that the way the javascript was written makes it so that it ignores the print style sheet. When I go to print preview, it ignores the print style sheet and the preview shows me all of my webpage unstyled. It looks like just the html when opened in a browser. I am using the javascript by Kevin Hale at ParticleTree, and I'm sure there are those familiar with this :] http://particletree.com/examples/dynamiclayouts/ I would like to know what needs to be changed so that the print style sheet isn't ignored. I've shown this to my professor. However, her email wasn't clear enough, but I understand that somehow the script is ignoring the print.css and that's why the print preview shows a css-less preview. Since it's the weekend, I won't be able to get an answer until Monday, and I was hoping someone can help me out. Thank you very much! Michael

Read the article

Bind a list to silverlight datagrid/datafrom columns

- by nilarya

There must be something I am missing, I want to do a very simple thing, for example, I have a class like the following: public class Person { public int ID { get; set; } public string FirstName { get; set; } public string LastName { get; set; } public DateTime DateOfBirth { get; set; } public List<string> phoneNumbers { get; set; } } I want to bind it to a dataform by something like this: public Person person { get; set; } List<string> lst = new List<string>(); lst.Add("123445"); lst.Add("2345345"); lst.Add("4576345"); lst.Add("456784"); lst.Add("789067"); person = new Person() { ID = 1, FirstName = "Kevin", LastName = "Dockx", DateOfBirth = new DateTime(1981, 5, 5), Lookup = lst }; and then dataForm1.CurrentItem = person; What I am doing wrong?

Read the article

print friendly version of floated list

- by Brad

I have a list of phone extensions that I want to print a friendly version of it. I have a print css for it to print appropriately onto paper, the extensions are located within an unordered list, which are floated to the left. <ul> <li>Larry Hughes <span class="ext">8291</span></li> <li>Chuck Davis <span class="ext">3141</span></li> <li>Kevin Skillis <span class="ext">5115</span></li> </ul> I float it left, and when it prints the second page, it leaves off the name part of the list (in Firefox, works fine in Google Chrome and IE), see here: http://cl.ly/de965aea63f66c13ba32 I am referring to this: http://www.alistapart.com/articles/goingtoprint/ - they mentioned something about applying a float:none; to the content part of the page. If I do that, how should I go about making the list show up in 4 columns? It is a dynamic list, pulled from a database. Any help is appreciated.

Read the article

Perl: How do I capture Chinese input via SCIM with STDIN?

- by KCArpe

Hi, I use SCIM on Linux for Chinese and Japanese language input. Unfortunately, when I try to capture input using Perl's STDIN, the input is crazy. As roman characters are typed, SCIM tries to guess the correct final characters. ^H (backspace) codes are used to delete previously suggested chars on the command line. (As you type, SCIM tries to guess final Asian chars and displays them.) However, these backspace chars are shown literally as ^H and not interpreted correctly. Example one-liner: perl -e 'print "Chinese: "; my $s = <STDIN>; print $s' When I enable SCIM Chinese or Japanese language input, as I type, e.g., nihao = ??, here is the result: ?^H?^H?^H?^H?^H??^H^H??^H^H??^H^H??^H^H??^H^H??^H^H??^H^H??^H^H??^H^H?? At the very end of this string, you can see "??" (nihao/hello). At a normal bash prompt, if I type nihao (with Chinese enabled), the results is perfect. This has something to do with interpretation of backspace chars (or control chars) during Perl's STDIN. The same thing happens when using command 'read' in Bash. Witness: read -p 'Chinese: ' s && echo $s Cheers, Kevin

Read the article

What do I do about a Java program that spawned two instaces of itself?

- by user288915

I have a java JAR file that is triggered by a SQL server job. It's been running successfully for months. The process pulls in a structured flat file to a staging database then pushes that data into an XML file. However yesterday the process was triggered twice at the same time. I can tell from a log file that gets created, it looks like the process ran twice simultaneously. This caused a lot of issues and the XML file that it kicked out was malformed and contained duplicate nodes etc. My question is, is this a known issue with Java JVM's spawning multiple instances of itself? Or should I be looking at sql server as the culprit? I'm looking into 'socket locking' or file locking to prevent multiple instances in the future. This is the first instance of this issue that I've ever heard of. More info: The job is scheduled to run every minute. The job triggers a .bat file that contains the java.exe - jar filename.jar The java program runs, scans a directory for a file and then executes a loop to process if the file if it finds one. After it processes the file it runs another loop that kicks out XML messages. I can provide code samples if that would help. Thank you, Kevin

Read the article

Parallelism in .NET – Part 10, Cancellation in PLINQ and the Parallel class

- by Reed

Many routines are parallelized because they are long running processes. When writing an algorithm that will run for a long period of time, its typically a good practice to allow that routine to be cancelled. I previously discussed terminating a parallel loop from within, but have not demonstrated how a routine can be cancelled from the caller’s perspective. Cancellation in PLINQ and the Task Parallel Library is handled through a new, unified cooperative cancellation model introduced with .NET 4.0. Cancellation in .NET 4 is based around a new, lightweight struct called CancellationToken. A CancellationToken is a small, thread-safe value type which is generated via a CancellationTokenSource. There are many goals which led to this design. For our purposes, we will focus on a couple of specific design decisions: Cancellation is cooperative. A calling method can request a cancellation, but it’s up to the processing routine to terminate – it is not forced. Cancellation is consistent. A single method call requests a cancellation on every copied CancellationToken in the routine. Let’s begin by looking at how we can cancel a PLINQ query. Supposed we wanted to provide the option to cancel our query from Part 6: double min = collection .AsParallel() .Min(item => item.PerformComputation()); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } We would rewrite this to allow for cancellation by adding a call to ParallelEnumerable.WithCancellation as follows: var cts = new CancellationTokenSource(); // Pass cts here to a routine that could, // in parallel, request a cancellation try { double min = collection .AsParallel() .WithCancellation(cts.Token) .Min(item => item.PerformComputation()); } catch (OperationCanceledException e) { // Query was cancelled before it finished } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, if the user calls cts.Cancel() before the PLINQ query completes, the query will stop processing, and an OperationCanceledException will be raised. Be aware, however, that cancellation will not be instantaneous. When cts.Cancel() is called, the query will only stop after the current item.PerformComputation() elements all finish processing. cts.Cancel() will prevent PLINQ from scheduling a new task for a new element, but will not stop items which are currently being processed. This goes back to the first goal I mentioned – Cancellation is cooperative. Here, we’re requesting the cancellation, but it’s up to PLINQ to terminate. If we wanted to allow cancellation to occur within our routine, we would need to change our routine to accept a CancellationToken, and modify it to handle this specific case: public void PerformComputation(CancellationToken token) { for (int i=0; i<this.iterations; ++i) { // Add a check to see if we've been canceled // If a cancel was requested, we'll throw here token.ThrowIfCancellationRequested(); // Do our processing now this.RunIteration(i); } } With this overload of PerformComputation, each internal iteration checks to see if a cancellation request was made, and will throw an OperationCanceledException at that point, instead of waiting until the method returns. This is good, since it allows us, as developers, to plan for cancellation, and terminate our routine in a clean, safe state. This is handled by changing our PLINQ query to: try { double min = collection .AsParallel() .WithCancellation(cts.Token) .Min(item => item.PerformComputation(cts.Token)); } catch (OperationCanceledException e) { // Query was cancelled before it finished } PLINQ is very good about handling this exception, as well. There is a very good chance that multiple items will raise this exception, since the entire purpose of PLINQ is to have multiple items be processed concurrently. PLINQ will take all of the OperationCanceledException instances raised within these methods, and merge them into a single OperationCanceledException in the call stack. This is done internally because we added the call to ParallelEnumerable.WithCancellation. If, however, a different exception is raised by any of the elements, the OperationCanceledException as well as the other Exception will be merged into a single AggregateException. The Task Parallel Library uses the same cancellation model, as well. Here, we supply our CancellationToken as part of the configuration. The ParallelOptions class contains a property for the CancellationToken. This allows us to cancel a Parallel.For or Parallel.ForEach routine in a very similar manner to our PLINQ query. As an example, we could rewrite our Parallel.ForEach loop from Part 2 to support cancellation by changing it to: try { var cts = new CancellationTokenSource(); var options = new ParallelOptions() { CancellationToken = cts.Token }; Parallel.ForEach(customers, options, customer => { // Run some process that takes some time... DateTime lastContact = theStore.GetLastContact(customer); TimeSpan timeSinceContact = DateTime.Now - lastContact; // Check for cancellation here options.CancellationToken.ThrowIfCancellationRequested(); // If it's been more than two weeks, send an email, and update... if (timeSinceContact.Days > 14) { theStore.EmailCustomer(customer); customer.LastEmailContact = DateTime.Now; } }); } catch (OperationCanceledException e) { // The loop was cancelled } Notice that here we use the same approach taken in PLINQ. The Task Parallel Library will automatically handle our cancellation in the same manner as PLINQ, providing a clean, unified model for cancellation of any parallel routine. The TPL performs the same aggregation of the cancellation exceptions as PLINQ, as well, which is why a single exception handler for OperationCanceledException will cleanly handle this scenario. This works because we’re using the same CancellationToken provided in the ParallelOptions. If a different exception was thrown by one thread, or a CancellationToken from a different CancellationTokenSource was used to raise our exception, we would instead receive all of our individual exceptions merged into one AggregateException.

Read the article

Parallelism in .NET – Part 18, Task Continuations with Multiple Tasks

- by Reed

In my introduction to Task continuations I demonstrated how the Task class provides a more expressive alternative to traditional callbacks. Task continuations provide a much cleaner syntax to traditional callbacks, but there are other reasons to switch to using continuations… Task continuations provide a clean syntax, and a very simple, elegant means of synchronizing asynchronous method results with the user interface. In addition, continuations provide a very simple, elegant means of working with collections of tasks. Prior to .NET 4, working with multiple related asynchronous method calls was very tricky. If, for example, we wanted to run two asynchronous operations, followed by a single method call which we wanted to run when the first two methods completed, we’d have to program all of the handling ourselves. We would likely need to take some approach such as using a shared callback which synchronized against a common variable, or using a WaitHandle shared within the callbacks to allow one to wait for the second. Although this could be accomplished easily enough, it requires manually placing this handling into every algorithm which requires this form of blocking. This is error prone, difficult, and can easily lead to subtle bugs. Similar to how the Task class static methods providing a way to block until multiple tasks have completed, TaskFactory contains static methods which allow a continuation to be scheduled upon the completion of multiple tasks: TaskFactory.ContinueWhenAll. This allows you to easily specify a single delegate to run when a collection of tasks has completed. For example, suppose we have a class which fetches data from the network. This can be a long running operation, and potentially fail in certain situations, such as a server being down. As a result, we have three separate servers which we will “query” for our information. Now, suppose we want to grab data from all three servers, and verify that the results are the same from all three. With traditional asynchronous programming in .NET, this would require using three separate callbacks, and managing the synchronization between the various operations ourselves. The Task and TaskFactory classes simplify this for us, allowing us to write: var server1 = Task.Factory.StartNew( () => networkClass.GetResults(firstServer) ); var server2 = Task.Factory.StartNew( () => networkClass.GetResults(secondServer) ); var server3 = Task.Factory.StartNew( () => networkClass.GetResults(thirdServer) ); var result = Task.Factory.ContinueWhenAll( new[] {server1, server2, server3 }, (tasks) => { // Propogate exceptions (see below) Task.WaitAll(tasks); return this.CompareTaskResults( tasks[0].Result, tasks[1].Result, tasks[2].Result); }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This is clean, simple, and elegant. The one complication is the Task.WaitAll(tasks); statement. Although the continuation will not complete until all three tasks (server1, server2, and server3) have completed, there is a potential snag. If the networkClass.GetResults method fails, and raises an exception, we want to make sure to handle it cleanly. By using Task.WaitAll, any exceptions raised within any of our original tasks will get wrapped into a single AggregateException by the WaitAll method, providing us a simplified means of handling the exceptions. If we wait on the continuation, we can trap this AggregateException, and handle it cleanly. Without this line, it’s possible that an exception could remain uncaught and unhandled by a task, which later might trigger a nasty UnobservedTaskException. This would happen any time two of our original tasks failed. Just as we can schedule a continuation to occur when an entire collection of tasks has completed, we can just as easily setup a continuation to run when any single task within a collection completes. If, for example, we didn’t need to compare the results of all three network locations, but only use one, we could still schedule three tasks. We could then have our completion logic work on the first task which completed, and ignore the others. This is done via TaskFactory.ContinueWhenAny: var server1 = Task.Factory.StartNew( () => networkClass.GetResults(firstServer) ); var server2 = Task.Factory.StartNew( () => networkClass.GetResults(secondServer) ); var server3 = Task.Factory.StartNew( () => networkClass.GetResults(thirdServer) ); var result = Task.Factory.ContinueWhenAny( new[] {server1, server2, server3 }, (firstTask) => { return this.ProcessTaskResult(firstTask.Result); }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, instead of working with all three tasks, we’re just using the first task which finishes. This is very useful, as it allows us to easily work with results of multiple operations, and “throw away” the others. However, you must take care when using ContinueWhenAny to properly handle exceptions. At some point, you should always wait on each task (or use the Task.Result property) in order to propogate any exceptions raised from within the task. Failing to do so can lead to an UnobservedTaskException.

Read the article

Microsoft TypeScript : A Typed Superset of JavaScript

- by shiju

JavaScript is gradually becoming a ubiquitous programming language for the web, and the popularity of JavaScript is increasing day by day. Earlier, JavaScript was just a language for browser. But now, we can write JavaScript apps for browser, server and mobile. With the advent of Node.js, you can build scalable, high performance apps on the server with JavaScript. But many developers, especially developers who are working with static type languages, are hating the JavaScript language due to the lack of structuring and the maintainability problems of JavaScript. Microsoft TypeScript is trying to solve some problems of JavaScript when we are building scalable JavaScript apps. Microsoft TypeScript TypeScript is Microsoft's solution for writing scalable JavaScript programs with the help of Static Types, Interfaces, Modules and Classes along with greater tooling support. TypeScript is a typed superset of JavaScript that compiles to plain JavaScript. This would be more productive for developers who are coming from static type languages. You can write scalable JavaScript apps in TypeScript with more productive and more maintainable manner, and later you can compiles to plain JavaScript which will be run on any browser and any OS. TypeScript will work with browser based JavaScript apps and JavaScript apps that following CommonJS specification. You can use TypeScript for building HTML 5 apps, Node.JS apps, WinRT apps. TypeScript is providing better tooling support with Visual Studio, Sublime Text, Vi, Emacs. Microsoft has open sourced its TypeScript languages on CodePlex at http://typescript.codeplex.com/ Install TypeScript You can install TypeScript compiler as a Node.js package via the NPM or you can install as a Visual Studio 2012 plug-in which will enable you better tooling support within the Visual Studio IDE. Since TypeScript is distributed as a Node.JS package, and it can be installed on other OS such as Linux and MacOS. The following command will install TypeScript compiler via an npm package for node.js npm install –g typescript TypeScript provides a Visual Studio 2012 plug-in as MSI file which will install TypeScript and also provides great tooling support within the Visual Studio, that lets the developers to write TypeScript apps with greater productivity and better maintainability. You can download the Visual Studio plug-in from here Building JavaScript apps with TypeScript You can write typed version of JavaScript programs with TypeScript and then compiles it to plain JavaScript code. The beauty of the TypeScript is that it is already JavaScript and normal JavaScript programs are valid TypeScript programs, which means that you can write normal JavaScript code and can use typed version of JavaScript whenever you want. TypeScript files are using extension .ts and this will be compiled using a compiler named tsc. The following is a sample program written in TypeScript greeter.ts 1: class Greeter { 2: greeting: string; 3: constructor (message: string) { 4: this.greeting = message; 5: } 6: greet() { 7: return "Hello, " + this.greeting; 8: } 9: } 10: 11: var greeter = new Greeter("world"); 12: 13: var button = document.createElement('button') 14: button.innerText = "Say Hello" 15: button.onclick = function() { 16: alert(greeter.greet()) 17: } 18: 19: document.body.appendChild(button) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The above program is compiling with the TypeScript compiler as shown in the below picture The TypeScript compiler will generate a JavaScript file after compiling the TypeScript program. If your TypeScript programs having any reference to other TypeScript files, it will automatically generate JavaScript files for the each referenced files. The following code block shows the compiled version of plain JavaScript for the above greeter.ts greeter.js 1: var Greeter = (function () { 2: function Greeter(message) { 3: this.greeting = message; 4: } 5: Greeter.prototype.greet = function () { 6: return "Hello, " + this.greeting; 7: }; 8: return Greeter; 9: })(); 10: var greeter = new Greeter("world"); 11: var button = document.createElement('button'); 12: button.innerText = "Say Hello"; 13: button.onclick = function () { 14: alert(greeter.greet()); 15: }; 16: document.body.appendChild(button); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Tooling Support with Visual Studio TypeScript is providing a plug-in for Visual Studio which will provide an excellent support for writing TypeScript programs within the Visual Studio. The following screen shot shows the Visual Studio template for TypeScript apps The following are the few screen shots of Visual Studio IDE for TypeScript apps. Summary TypeScript is Microsoft's solution for writing scalable JavaScript apps which will solve lot of problems involved in larger JavaScript apps. I hope that this solution will attract lot of developers who are really looking for writing maintainable structured code in JavaScript, without losing any productivity. TypeScript lets developers to write JavaScript apps with the help of Static Types, Interfaces, Modules and Classes and also providing better productivity. I am a passionate developer on Node.JS and would definitely try to use TypeScript for building Node.JS apps on the Windows Azure cloud. I am really excited about to writing Node.JS apps by using TypeScript, from my favorite development IDE Visual Studio. You can follow me on twitter at @shijucv

Read the article

Simplify your Ajax code by using jQuery Global Ajax Handlers and ajaxSetup low-level interface

- by hajan

Creating web applications with consistent layout and user interface is very important for your users. In several ASP.NET projects I’ve completed lately, I’ve been using a lot jQuery and jQuery Ajax to achieve rich user experience and seamless interaction between the client and the server. In almost all of them, I took advantage of the nice jQuery global ajax handlers and jQuery ajax functions. Let’s say you build web application which mainly interacts using Ajax post and get to accomplish various operations. As you may already know, you can easily perform Ajax operations using jQuery Ajax low-level method or jQuery $.get, $.post, etc. Simple get example: $.get("/Home/GetData", function (d) { alert(d); }); As you can see, this is the simplest possible way to make Ajax call. What it does in behind is constructing low-level Ajax call by specifying all necessary information for the request, filling with default information set for the required properties such as data type, content type, etc... If you want to have some more control over what is happening with your Ajax Request, you can easily take advantage of the global ajax handlers. In order to register global ajax handlers, jQuery API provides you set of global Ajax methods. You can find all the methods in the following link http://api.jquery.com/category/ajax/global-ajax-event-handlers/, and these are: ajaxComplete ajaxError ajaxSend ajaxStart ajaxStop ajaxSuccess And the low-level ajax interfaces http://api.jquery.com/category/ajax/low-level-interface/: ajax ajaxPrefilter ajaxSetup For global settings, I usually use ajaxSetup combining it with the ajax event handlers. $.ajaxSetup is very good to help you set default values that you will use in all of your future Ajax Requests, so that you won’t need to repeat the same properties all the time unless you want to override the default settings. Mainly, I am using global ajaxSetup function similarly to the following way: $.ajaxSetup({ cache: false, error: function (x, e) { if (x.status == 550) alert("550 Error Message"); else if (x.status == "403") alert("403. Not Authorized"); else if (x.status == "500") alert("500. Internal Server Error"); else alert("Error..."); }, success: function (x) { //do something global on success... } }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now, you can make ajax call using low-level $.ajax interface and you don’t need to worry about specifying any of the properties we’ve set in the $.ajaxSetup function. So, you can create your own ways to handle various situations when your Ajax requests are occurring. Sometimes, some of your Ajax Requests may take much longer than expected… So, in order to make user friendly UI that will show some progress bar or animated image that something is happening in behind, you can combine ajaxStart and ajaxStop methods to do the same. First of all, add one <div id=”loading” style=”display:none;”> <img src="@Url.Content("~/Content/images/ajax-loader.gif")" alt="Ajax Loader" /></div> anywhere on your Master Layout / Master page (you can download nice ajax loading images from http://ajaxload.info/). Then, add the following two handlers: $(document).ajaxStart(function () { $("#loading").attr("style", "position:absolute; z-index: 1000; top: 0px; "+ "left:0px; text-align: center; display:none; background-color: #ddd; "+ "height: 100%; width: 100%; /* These three lines are for transparency "+ "in all browsers. */-ms-filter:\"progid:DXImageTransform.Microsoft.Alpha(Opacity=50)\";"+ " filter: alpha(opacity=50); opacity:.5;"); $("#loading img").attr("style", "position:relative; top:40%; z-index:5;"); $("#loading").show(); }); $(document).ajaxStop(function () { $("#loading").removeAttr("style"); $("#loading img").removeAttr("style"); $("#loading").hide(); }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Note: While you can reorganize the style in a more reusable way, since these are global Ajax Start/Stop, it is very possible that you won’t use the same style in other places. With this way, you will see that now for any ajax request in your web site or application, you will have the loading image appearing providing better user experience. What I’ve shown is several useful examples on how to simplify your Ajax code by using Global Ajax Handlers and the low-level AjaxSetup function. Of course, you can do a lot more with the other methods as well. Hope this was helpful. Regards, Hajan

Read the article

Using Teleriks new LINQ implementation to create OData feeds

This week Telerik released a new LINQ implementation that is simple to use and produces domain models very fast. Built on top of the enterprise grade OpenAccess ORM, you can connect to any database that OpenAccess can connect to such as: SQL Server, MySQL, Oracle, SQL Azure, VistaDB, etc. While this is a separate LINQ implementation from traditional OpenAccess Entites, you can use the visual designer without ever interacting with OpenAccess, however, you can always hook into the advanced ORM features like caching, fetch plan optimization, etc, if needed. Just to show off how easy our LINQ implementation is to use, I will walk you through building an OData feed using Data Services Update for .NET Framework 3.5 SP1. (Memo to Microsoft: P-L-E-A-S-E hire someone from Apple to name your products.) How easy is it? If you have a fast machine, are skilled with the mouse, and type fast, you can do this in about 60 seconds via three easy steps. (I promise in about 2-3 weeks that you can do this in less then 30 seconds. Stay tuned for that.) Step 1 (15-20 seconds): Building your Domain Model In your web project in Visual Studio, right click on the project and select Add|New Item and select Telerik OpenAccess Domain Model as your item template. Give the file a meaningful name as well. Select your database type (SQL Server, SQL Azure, Oracle, MySQL, VistaDB, etc) and build the connection string. If you already have a Visual Studio connection string already saved, this step is trivial. Then select your tables, enter a name for your model and click Finish. In this case I connected to Northwind and selected only Customers, Orders, and Order Details. I named my model NorthwindEntities and will use that in my DataService. Step 2 (20-25 seconds): Adding and Configuring your Data Service In your web project in Visual Studio, right click on the project and select Add|New Item and select ADO .NET Data Service as your item template and name your service. In the code behind for your Data Service you have to make three small changes. Add the name of your Telerik Domain Model (entered in Step 1) as the DataService name (shown on line 6 below as NorthwindEntities) and uncomment line 11 and add a * to show all entities. Optionally if you want to take advantage of the DataService 3.5 updates, add line 13 (and change IDataServiceConfiguration to DataServiceConfiguration in line 9.) 1: using System.Data.Services; 2: using System.Data.Services.Common; 3: 4: namespace Telerik.RLINQ.Astoria.Web 5: { 6: public class NorthwindService : DataService<NorthwindEntities> 7: { 8: //change the IDataServiceConfigurationto DataServiceConfiguration 9: public static void InitializeService(DataServiceConfiguration config) 10: { 11: config.SetEntitySetAccessRule("*", EntitySetRights.All); 12: //take advantage of the "Astoria3.5 Update" features 13: config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; 14: } 15: } 16: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Step 3 (~30 seconds): Adding the DataServiceKeys You now have to tell your data service what are the primary keys of each entity. To do this you have to create a new code file and create a few partial classes. If you type fast, use copy and paste from your first entity, and use a refactoring productivity tool, you can add these 6-8 lines of code or so in about 30 seconds. This is the most tedious step, but dont worry, Ive bribed some of the developers and our next update will eliminate this step completely. Just create a partial class for each entity you have mapped and add the attribute [DataServiceKey] on top of it along with the keys field name. If you have any complex properties, you will need to make them a primitive type, as I do in line 15. Create this as a separate file, dont manipulate the generated data access classes in case you want to regenerate them again later (even thought that would be much faster.) 1: using System.Data.Services.Common; 2: 3: namespace Telerik.RLINQ.Astoria.Web 4: { 5: [DataServiceKey("CustomerID")] 6: public partial class Customer 7: { 8: } 9: 10: [DataServiceKey("OrderID")] 11: public partial class Order 12: { 13: } 14: 15: [DataServiceKey(new string[] { "OrderID", "ProductID" })] 16: public partial class OrderDetail 17: { 18: } 19: 20: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Done! Time to run the service. Now, lets run the service! Select the svc file and right click and say View in Browser. You will see your OData service and can interact with it in the browser. Now that you have an OData service set up, you can consume it in one of the many ways that OData is consumed: using LINQ, the Silverlight OData client, Excel PowerPivot, or PhP, etc. Happy Data Servicing! Technorati Tags: Telerik,Astoria,Data Services Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Silverlight for Windows Embedded Tutorial (step 5 and a bit of Windows Phone 7)

- by Valter Minute

If you haven’t spent the last week in the middle of the Sahara desert or traveling on a sled in the north pole area you should have heard something about the launch of Windows Phone 7 Series (or Windows Phone Series 7, or Windows Series Phone 7 or something like that). Even if you are in the middle of the desert or somewhere around the north pole you may have been reached by the news, since it seems that WP7S (using the full name will kill my available bandwidth!) is generating a lot of buzz in the development and IT communities. One of the most important aspects of this new platform is that it will be programmed using a new set of tools and frameworks, completely different from the ones used on older releases of Windows Mobile (or SmartPhone, or PocketPC or whatever…). WP7S applications can be developed using Silverlight or XNA. If you want to learn something more about WP7S development you can download the preview of Charles Petzold’s book about it: http://www.charlespetzold.com/phone/index.html Charles Petzold is also the author of “Programming Windows”, the first book I ever read about programming on Windows (it was Windows 3.0 at that time!). The fact that even I was able to learn how to develop Windows application is a proof of the quality of Petzold’s work. This book is up to his standards and the 150pages preview is already rich in technical contents without being boring or complicated to understand. I may be able to become a Windows Phone developer thanks to mr. Petzold. Mr. Petzold uses some nice samples to introduce the basic concepts of Silverlight development on WP7S. On this new platform you’ll use managed code to develop your application, so those samples can’t be ported on Windows CE R3 as they are, but I would like to take one of the first samples (called “SilverlightTapHello1”) and adapt it to Silverlight for Windows Embedded to show that even plain old native code can be used to develop “cool” user interfaces! The sample shows the standard WP7S title header and a textbox with an hello world message inside it. When the user touches the textbox, it will change its color. When the user touches the background (Grid) behind it, its default color (plain old White) will be restored. Let’s see how we can implement the same features on our embedded device! I took the XAML code of the sample (you can download the book samples here: http://download.microsoft.com/download/1/D/B/1DB49641-3956-41F1-BAFA-A021673C709E/CodeSamples_DRAFTPreview_ProgrammingWindowsPhone7Series.zip) and changed it a little bit to remove references to WP7S or managed runtime. If you compare the resulting files you will see that I was able to keep all the resources inside the App.xaml files and the structure of MainPage.XAML almost intact. This is the Silverlight for Windows Embedded version of MainPage.XAML: <UserControl x:Class="SilverlightTapHello1.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:phoneNavigation="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone.Controls.Navigation" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignWidth="480" d:DesignHeight="800" FontFamily="{StaticResource PhoneFontFamilyNormal}" FontSize="{StaticResource PhoneFontSizeNormal}" Foreground="{StaticResource PhoneForegroundBrush}" Width="640" Height="480"> <Grid x:Name="LayoutRoot" Background="{StaticResource PhoneBackgroundBrush}"> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="*"/> </Grid.RowDefinitions>  <Grid x:Name="TitleGrid" Grid.Row="0"> <TextBlock Text="SILVERLIGHT TAP HELLO #1" x:Name="textBlockPageTitle" Style="{StaticResource PhoneTextPageTitle1Style}"/> <TextBlock Text="main page" x:Name="textBlockListTitle" Style="{StaticResource PhoneTextPageTitle2Style}"/> </Grid>  <Grid x:Name="ContentGrid" Grid.Row="1" MouseLeftButtonDown="ContentGrid_MouseButtonDown" Background="{StaticResource PhoneBackgroundBrush}"> <TextBlock x:Name="TextBlock" Text="Hello, Silverlight for Windows Embedded!" HorizontalAlignment="Center" VerticalAlignment="Center" /> </Grid> </Grid> </UserControl> If you compare it to the WP7S sample (not reported here to avoid any copyright issue) you’ll notice that I had to replace the original phoneNavigation:PhoneApplicationPage with UserControl as the root node. This make sense because there is not support for phone applications on CE 6. I also had to specify width and height of my main page (on the WP7S device this will be adjusted by the OS) and I had to replace the multi-touch event handler with the MouseLeftButtonDown event (no multitouch support for Windows CE R3, still). I also changed the hello message, of course. I used XAML2CPP to generate the boring part of our application and then added the initialization code to WinMain: int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { if (!XamlRuntimeInitialize()) return -1; HRESULT retcode; IXRApplicationPtr app; if (FAILED(retcode=GetXRApplicationInstance(&app))) return -1; XRXamlSource dictsrc; dictsrc.SetResource(hInstance,TEXT("XAML"),IDR_XAML_App); if (FAILED(retcode=app->LoadResourceDictionary(&dictsrc,NULL))) return -1; MainPage page; if (FAILED(page.Init(hInstance,app))) return -1; UINT exitcode; if (FAILED(page.GetVisualHost()->StartDialog(&exitcode))) return -1; return exitcode; } You may have noticed that there is something different from the previous samples. I added the code to load a resource dictionary. Resources are an important feature of XAML that allows you to define some values that could be replaced inside any XAML file loaded by the runtime. You can use resources to define custom styles for your fonts, backgrounds, controls etc. and to support internationalization, by providing different strings for different languages. The rest of our WinMain isn’t that different. It creates an instances of our MainPage object and displays it. The MainPage class implements an event handler for the MouseLeftButtonDown event of the ContentGrid: class MainPage : public TMainPage<MainPage> { public: HRESULT ContentGrid_MouseButtonDown(IXRDependencyObject* source,XRMouseButtonEventArgs* args) { HRESULT retcode; IXRSolidColorBrushPtr brush; IXRApplicationPtr app; if (FAILED(retcode=GetXRApplicationInstance(&app))) return retcode; if (FAILED(retcode=app->CreateObject(IID_IXRSolidColorBrush,&brush))) return retcode; COLORREF color=RGBA(0xff,0xff,0xff,0xff); if (args->pOriginalSource==TextBlock) color=RGBA(rand()&0xFF,rand()&0xFF,rand()&0xFF,0xFF); if (FAILED(retcode=brush->SetColor(color))) return retcode; if (FAILED(retcode=TextBlock->SetForeground(brush))) return retcode; return S_OK; } }; As you can see this event is generated when a used clicks inside the grid or inside one of the objects it contains. Since our TextBlock is inside the grid, we don’t need to provide an event handler for its MouseLeftButtonDown event. We can just use the pOriginalSource member of the event arguments to check if the event was generated inside the textblock. If the event was generated inside the grid we create a white brush,if it’s inside the textblock we create some randomly colored brush. Notice that we need to use the RGBA macro to create colors, specifying also a transparency value for them. If we use the RGB macro the resulting color will have its Alpha channel set to zero and will be transparent. Using the SetForeground method we can change the color of our control. You can compare this to the managed code that you can find at page 40-41 of Petzold’s preview book and you’ll see that the native version isn’t much more complex than the managed one. As usual you can download the full code of the sample here: http://cid-9b7b0aefe3514dc5.skydrive.live.com/self.aspx/.Public/SilverlightTapHello1.zip And remember to pre-order Charles Petzold’s “Programming Windows Phone 7 series”, I bet it will be a best-seller! Technorati Tags: Silverlight for Windows Embedded,Windows CE

Read the article

Shuffle tiles position in the beginning of the game XNA Csharp

- by GalneGunnar

Im trying to create a puzzlegame where you move tiles to certain positions to make a whole image. I need help with randomizing the tiles startposition so that they don't create the whole image at the beginning. There is also something wrong with my offset, that's why it's set to (0,0). I know my code is not good, but Im just starting to learn :] Thanks in advance My Game1 class: { public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; Texture2D PictureTexture; Texture2D FrameTexture; // Offset för bildgraff Vector2 Offset = new Vector2(0,0); //skapar en array som ska hålla delar av den stora bilden Square[,] squareArray = new Square[4, 4]; // Random randomeraBilder = new Random(); //Width och Height för bilden int pictureHeight = 95; int pictureWidth = 144; Random randomera = new Random(); int index = 0; MouseState oldMouseState; int WindowHeight; int WindowWidth; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; //scalar Window till 800x 600y graphics.PreferredBackBufferWidth = 800; graphics.PreferredBackBufferHeight = 600; graphics.ApplyChanges(); } protected override void Initialize() { IsMouseVisible = true; base.Initialize(); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); PictureTexture = Content.Load<Texture2D>(@"Images/bildgraff"); FrameTexture = Content.Load<Texture2D>(@"Images/framer"); //Laddar in varje liten bild av den stora bilden i en array for (int x = 0; x < 4; x++) { for (int y = 0; y < 4; y++) { Vector2 position = new Vector2(x * pictureWidth, y * pictureHeight); position = position + Offset; Rectangle square = new Rectangle(x * pictureWidth, y * pictureHeight, pictureWidth, pictureHeight); Square frame = new Square(position, PictureTexture, square, Offset, index); squareArray[x, y] = frame; index++; } } } protected override void UnloadContent() { } protected override void Update(GameTime gameTime) { if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); MouseState ms = Mouse.GetState(); if (oldMouseState.LeftButton == ButtonState.Pressed && ms.LeftButton == ButtonState.Released) { // ta reda på vilken position vi har tryckt på int col = ms.X / pictureWidth; int row = ms.Y / pictureHeight; for (int x = 0; x < squareArray.GetLength(0); x++) { for (int y = 0; y < squareArray.GetLength(1); y++) { // kollar om rutan är tom och så att indexet inte går utanför för "col" och "row" if (squareArray[x, y].index == 0 && col >= 0 && row >= 0 && col <= 3 && row <= 3) { if (squareArray[x, y].index == 0 * col) { //kollar om rutan brevid mouseclick är tom if (col > 0 && squareArray[col - 1, row].index == 0 || row > 0 && squareArray[col, row - 1].index == 0 || col < 3 && squareArray[col + 1, row].index == 0 || row < 3 && squareArray[col, row + 1].index == 0) { Square sqaure = squareArray[col, row]; Square hal = squareArray[x, y]; squareArray[x, y] = sqaure; squareArray[col, row] = hal; for (int i = 0; i < 4; i++) { for (int j = 0; j < 4; j++) { Vector2 goalPosition = new Vector2(x * pictureWidth, y * pictureHeight); squareArray[x, y].Swap(goalPosition); } } } } } } } } //if (oldMouseState.RightButton == ButtonState.Pressed && ms.RightButton == ButtonState.Released) //{ // for (int x = 0; x < 4; x++) // { // for (int y = 0; y < 4; y++) // { // } // } //} oldMouseState = ms; base.Update(gameTime); } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); WindowHeight = Window.ClientBounds.Height; WindowWidth = Window.ClientBounds.Width; Rectangle screenPosition = new Rectangle(0,0, WindowWidth, WindowHeight); spriteBatch.Begin(); spriteBatch.Draw(FrameTexture, screenPosition, Color.White); //Ritar ut alla brickorna förutom den som har index 0 for (int x = 0; x < 4; x++) { for (int y = 0; y < 4; y++) { if (squareArray[x, y].index != 0) { squareArray[x, y].Draw(spriteBatch); } } } spriteBatch.End(); base.Draw(gameTime); } } } My square class: class Square { public Vector2 position; public Texture2D grafTexture; public Rectangle square; public Vector2 offset; public int index; public Square(Vector2 position, Texture2D grafTexture, Rectangle square, Vector2 offset, int index) { this.position = position; this.grafTexture = grafTexture; this.square = square; this.offset = offset; this.index = index; } public void Draw(SpriteBatch spritebatch) { spritebatch.Draw(grafTexture, position, square, Color.White); } public void RandomPosition() { } public void Swap(Vector2 Goal ) { if (Goal.X > position.X) { position.X = position.X + 144; } else if (Goal.X < position.X) { position.X = position.X - 144; } else if (Goal.Y < position.Y) { position.Y = position.Y - 95; } else if (Goal.Y > position.Y) { position.Y = position.Y + 95; } } } }

Read the article

XNA 2D Collision with specific tiles

- by zenzero

I am new to game programming and to these sites for help. I am making a 2D game but I can't seem to get the collision between my character and certain tiles. I have a map filled with grass tiles and water tiles and I want to keep my character from walking on the water tiles. I have a Tiles class that I use so that the tiles are objects and also has the collision method in it, a TileEngine class used create the map and it also holds a list of Tiles, and the class James which is for my character. I also have a Camera class that centers the camera on my character if that has anything to do with the problem. The character's movement is intended to be restricted to 4 directions(up, down, left, right). As an extra note, the bottom right water tile does have collision, but the collision does not occur for any of the other water tiles. Here is my TileEngine class using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace Test2DGame2 { class TileEngine : Microsoft.Xna.Framework.Game { //makes a list of Tiles objects public List<Tiles> tilesList = new List<Tiles>(); public TileEngine() {} public static int tileWidth = 64; public static int tileHeight = 64; public int[,] map = { {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, {0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, {0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, }; public void drawMap(SpriteBatch spriteBatch) { for (int y = 0; y < map.GetLength(0); y++) { for (int x = 0; x < map.GetLength(1); x++) { //make a Rectangle tilesList[map[y, x]].rectangle = new Rectangle(x * tileWidth, y * tileHeight, tileWidth, tileHeight); //draw the Tiles objects spriteBatch.Draw(tilesList[map[y, x]].texture, tilesList[map[y, x]].rectangle, Color.White); } } } } } Here is my Tiles class using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace Test2DGame2 { class Tiles { public Texture2D texture; public Rectangle rectangle; public Tiles(Texture2D texture) { this.texture = texture; } //check to see if james collides with the tile from the right side public void rightCollision(James james) { if (james.GetBounds().Intersects(rectangle)) { james.position.X = rectangle.Left - james.front.Width; } } } } I have a method for rightCollision because I could only figure out how to get the collisions from specifying directions. and here is the James class for my character using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace Test2DGame2 { class James { public Texture2D front; public Texture2D back; public Texture2D left; public Texture2D right; public Vector2 center; public Vector2 position; public James(Texture2D front) { position = new Vector2(0, 0); this.front = front; center = new Vector2(front.Width / 2, front.Height / 2); } public James(Texture2D front, Vector2 newPosition) { this.front = front; position = newPosition; center = new Vector2(front.Width / 2, front.Height / 2); } public void move(GameTime gameTime) { KeyboardState keyboard = Keyboard.GetState(); float SCALE = 20.0f; float speed = gameTime.ElapsedGameTime.Milliseconds / 100.0f; if (keyboard.IsKeyDown(Keys.Up)) { position.Y -=speed * SCALE; } else if (keyboard.IsKeyDown(Keys.Down)) { position.Y += speed * SCALE; } else if (keyboard.IsKeyDown(Keys.Left)) { position.X -= speed * SCALE; } else if (keyboard.IsKeyDown(Keys.Right)) { position.X += speed * SCALE; } } public void draw(SpriteBatch spriteBatch) { spriteBatch.Draw(front, position, null, Color.White, 0, center, 1.0f, SpriteEffects.None, 0.0f); } //get the boundingbox for James public Rectangle GetBounds() { return new Rectangle( (int)position.X, (int)position.Y, front.Width, front.Height); } } }

Read the article

ASP.NET MVC 2 throws exception for ‘favicon.ico’

- by nmarun

I must be on fire or something – third blog in 2 days… awesome! Before I begin, in case you’re wondering, favicon.ico is the small image that appears to the left of your web address, once the page loads. In order to learn more about MVC or any thing for that matter, it’s better to look at the source itself. Since MVC is open source (at least some part of it is), I started looking at the source code that’s available for download. While doing so, I hit Steve Sanderson’s blog site where he explains in great detail the way to debug your app using ASP.NET MVC source code. For those who are not aware, Steve Sanderson’s book - Pro ASP.NET MVC Framework, is one of the best books to learn about MVC. Alrighty, I followed the article and I hit F5 to debug the default / unchanged MVC project. I put a breakpoint in the DefaultControllerFactory.cs, CreateController() method. To know a little more about this class and the method, read this. Sure enough, the control stopped at the breakpoint and I hit F5 again and the page rendered just fine. But then what’s this? The breakpoint was hit again, as if something else was being requested. I now hovered my mouse over the ‘controllerName’ parameter and it says – favicon.ico. This by itself was more than enough for me to raise my eye-brows, but what happened next just took the ground below my feet. Oh, oh, I’m sorry I’m just typing, no code, no image, so here are a couple of screen captures. The first one shows the request for the Home controller; I get ‘Home’ when I hover over the parameter: And here’s the one that shows the same for call for ‘favicon.ico’. So, I step through the code and when the control reaches line 91 – GetControllerInstance() method, I step in. This is when I had the ‘ground-losing’ experience. Wow, an exception is being thrown for this file and that too in RTM. For some reason MVC thinks, this as a controller and tries to run it through the MvcHandler and it hits this snag. So it seems like this will happen for any MVC 2 site and this did not happen for me in the previous version of MVC. Before I get to how to resolve it, here’s another way of reproducing this exception. Revert back all your changes that you did as mentioned in Steve’s blog above. Now, add a class to your MVC project and call it say, MyControllerFactory and let this inherit from DefaultControllerFactory class. (Read this for details on the DefaultControllerFactory class is and how it is used in a different context). Add an override for the CreateController() method and for the sake of this blog, just copy the same content from the DefaultControllerFactory class. The last step is to tell your MVC app to use the MyControllerFactory class instead of the default one. To do this, go to your Global.asax.cs file and add line 6 of the snippet below: 1: protected void Application_Start() 2: { 3: AreaRegistration.RegisterAllAreas(); 4: 5: RegisterRoutes(RouteTable.Routes); 6: ControllerBuilder.Current.SetControllerFactory(new MyControllerFactory()); 7: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now, you’re ready to reproduce the issue. Just F5 the project and when you hit the overridden CreateController() method for the second time, this is what it looks like for me: And continuing further gives me the same exception. I believe this is something that MS should fix, as not having ‘favicon.ico’ file will be common for most of the applications. So I think the when you create an MVC project, line 6 should be added by default by Visual Studio itself: 1: public class MvcApplication : System.Web.HttpApplication 2: { 3: public static void RegisterRoutes(RouteCollection routes) 4: { 5: routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); 6: routes.IgnoreRoute("favicon.ico"); 7: 8: routes.MapRoute( 9: "Default", // Route name 10: "{controller}/{action}/{id}", // URL with parameters 11: new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults 12: ); 13: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } There it is, that’s the solution to avoid the exception altogether. I tried this both IE8 and Firefox browsers and was able to successfully reproduce the error. Hope someone will look at this issue and find a fix. Just before I finish up, I found another ‘bug’, if you want to call it, with Visual Studio 2008. Remember how you could change what browser you want your application to run in by just right clicking on the .aspx file and choosing ‘Browse with…’? Seems like that’s missing when you’re working with an MVC project. In order to test the above bug in the other browser, I had to load a classic ASP.NET project, change the settings and then run my MVC project. Felt kinda ‘icky’, for lack of a better word.

Read the article

Improved Performance on PeopleSoft Combined Benchmark using SPARC T4-4

- by Brian

Oracle's SPARC T4-4 server running Oracle's PeopleSoft HCM 9.1 combined online and batch benchmark achieved a world record 18,000 concurrent users experiencing subsecond response time while executing a PeopleSoft Payroll batch job of 500,000 employees in 32.4 minutes. This result was obtained with a SPARC T4-4 server running Oracle Database 11g Release 2, a SPARC T4-4 server running PeopleSoft HCM 9.1 application server and a SPARC T4-2 server running Oracle WebLogic Server in the web tier. The SPARC T4-4 server running the application tier used Oracle Solaris Zones which provide a flexible, scalable and manageable virtualization environment. The average CPU utilization on the SPARC T4-2 server in the web tier was 17%, on the SPARC T4-4 server in the application tier it was 59%, and on the SPARC T4-4 server in the database tier was 47% (online and batch) leaving significant headroom for additional processing across the three tiers. The SPARC T4-4 server used for the database tier hosted Oracle Database 11g Release 2 using Oracle Automatic Storage Management (ASM) for database files management with I/O performance equivalent to raw devices. Performance Landscape Results are presented for the PeopleSoft HRMS Self-Service and Payroll combined benchmark. The new result with 128 streams shows significant improvement in the payroll batch processing time with little impact on the self-service component response time. PeopleSoft HRMS Self-Service and Payroll Benchmark Systems Users Ave Response Search (sec) Ave Response Save (sec) Batch Time (min) Streams SPARC T4-2 (web) SPARC T4-4 (app) SPARC T4-4 (db) 18,000 0.988 0.539 32.4 128 SPARC T4-2 (web) SPARC T4-4 (app) SPARC T4-4 (db) 18,000 0.944 0.503 43.3 64 The following results are for the PeopleSoft HRMS Self-Service benchmark that was previous run. The results are not directly comparable with the combined results because they do not include the payroll component. PeopleSoft HRMS Self-Service 9.1 Benchmark Systems Users Ave Response Search (sec) Ave Response Save (sec) Batch Time (min) Streams SPARC T4-2 (web) SPARC T4-4 (app) 2x SPARC T4-2 (db) 18,000 1.048 0.742 N/A N/A The following results are for the PeopleSoft Payroll benchmark that was previous run. The results are not directly comparable with the combined results because they do not include the self-service component. PeopleSoft Payroll (N.A.) 9.1 - 500K Employees (7 Million SQL PayCalc, Unicode) Systems Users Ave Response Search (sec) Ave Response Save (sec) Batch Time (min) Streams SPARC T4-4 (db) N/A N/A N/A 30.84 96 Configuration Summary Application Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 512 GB memory Oracle Solaris 11 11/11 PeopleTools 8.52 PeopleSoft HCM 9.1 Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level 031 Java Platform, Standard Edition Development Kit 6 Update 32 Database Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 256 GB memory Oracle Solaris 11 11/11 Oracle Database 11g Release 2 PeopleTools 8.52 Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level 031 Micro Focus Server Express (COBOL v 5.1.00) Web Tier Configuration: 1 x SPARC T4-2 server with 2 x SPARC T4 processors, 2.85 GHz 256 GB memory Oracle Solaris 11 11/11 PeopleTools 8.52 Oracle WebLogic Server 10.3.4 Java Platform, Standard Edition Development Kit 6 Update 32 Storage Configuration: 1 x Sun Server X2-4 as a COMSTAR head for data 4 x Intel Xeon X7550, 2.0 GHz 128 GB memory 1 x Sun Storage F5100 Flash Array (80 flash modules) 1 x Sun Storage F5100 Flash Array (40 flash modules) 1 x Sun Fire X4275 as a COMSTAR head for redo logs 12 x 2 TB SAS disks with Niwot Raid controller Benchmark Description This benchmark combines PeopleSoft HCM 9.1 HR Self Service online and PeopleSoft Payroll batch workloads to run on a unified database deployed on Oracle Database 11g Release 2. The PeopleSoft HRSS benchmark kit is a Oracle standard benchmark kit run by all platform vendors to measure the performance. It's an OLTP benchmark where DB SQLs are moderately complex. The results are certified by Oracle and a white paper is published. PeopleSoft HR SS defines a business transaction as a series of HTML pages that guide a user through a particular scenario. Users are defined as corporate Employees, Managers and HR administrators. The benchmark consist of 14 scenarios which emulate users performing typical HCM transactions such as viewing paycheck, promoting and hiring employees, updating employee profile and other typical HCM application transactions. All these transactions are well-defined in the PeopleSoft HR Self-Service 9.1 benchmark kit. This benchmark metric is the weighted average response search/save time for all the transactions. The PeopleSoft 9.1 Payroll (North America) benchmark demonstrates system performance for a range of processing volumes in a specific configuration. This workload represents large batch runs typical of a ERP environment during a mass update. The benchmark measures five application business process run times for a database representing large organization. They are Paysheet Creation, Payroll Calculation, Payroll Confirmation, Print Advice forms, and Create Direct Deposit File. The benchmark metric is the cumulative elapsed time taken to complete the Paysheet Creation, Payroll Calculation and Payroll Confirmation business application processes. The benchmark metrics are taken for each respective benchmark while running simultaneously on the same database back-end. Specifically, the payroll batch processes are started when the online workload reaches steady state (the maximum number of online users) and overlap with online transactions for the duration of the steady state. Key Points and Best Practices Two PeopleSoft Domain sets with 200 application servers each on a SPARC T4-4 server were hosted in 2 separate Oracle Solaris Zones to demonstrate consolidation of multiple application servers, ease of administration and performance tuning. Each Oracle Solaris Zone was bound to a separate processor set, each containing 15 cores (total 120 threads). The default set (1 core from first and third processor socket, total 16 threads) was used for network and disk interrupt handling. This was done to improve performance by reducing memory access latency by using the physical memory closest to the processors and offload I/O interrupt handling to default set threads, freeing up cpu resources for Application Servers threads and balancing application workload across 240 threads. A total of 128 PeopleSoft streams server processes where used on the database node to complete payroll batch job of 500,000 employees in 32.4 minutes. See Also Oracle PeopleSoft Benchmark White Papers oracle.com SPARC T4-2 Server oracle.com OTN SPARC T4-4 Server oracle.com OTN PeopleSoft Enterprise Human Capital Managementoracle.com OTN PeopleSoft Enterprise Human Capital Management (Payroll) oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 8 November 2012.

Search Results

Search found 5096 results on 204 pages for 'kevin d white'.

Page 120/204 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127 | Next Page >

- by Ray

- by mbcrump

- by crosenblum

- by mvaughan

- by Bob Rhubart

- by Mike Stiles

- by Tori Wieldt

- by KevB

- by user291780

- by Lily

- by Michael

- by nilarya

- by Brad

- by KCArpe

- by user288915

- by Reed

- by Reed

- by shiju

- by hajan

- by Valter Minute

- by GalneGunnar

- by zenzero

- by nmarun

- by Brian

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127 | Next Page >