Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 121/1213 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

• HDMI with Intel Mobile 4 Graphics Controller

  - by roel

  When connecting my TV over HDMI, it shows up in display settings and xrandr: Aspire1825PTZ:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) Aspire1825PTZ:~$ xrandr Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected (normal left inverted right x axis y axis) 720x576 50.0 720x480 59.9 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) DP3 disconnected (normal left inverted right x axis y axis) TV1 disconnected (normal left inverted right x axis y axis) However, the resolution is way too low and the screen remains black. Everything works fine in Windows, but I'd rather not reboot just to watch a film... Could anyone help me please?

  Read the article

• How do I get TV out working on an ATI X800 GTO²?

  - by Liran

  Is there any way to make my graphics card (ATI x800) work with tvout? I know there are no proprietary drivers for this card only the opensource ones. It uses this cable for video out: http://warningdang.dynalias.com/magento/media/catalog/product/cache/1/image/265x265/9df78eab33525d08d6e5fb8d27136e95/a/3/a31b_1.jpg Personally I use the yellow RCA for tvout (in windows). I hope there is a way to work it out because it's a really important feature for me and one of the only reasons I boot windows. Thanks ahead!

  Read the article

• Issues running commands

  - by Joel

  Every time I run a command I get this back. E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied) E: Unable to lock directory /var/lib/apt/lists/ E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root? christopher@christopher:~$ This didn't start happening until I changed my device name.

  Read the article

• Deleted some files from home folder

  - by narendra shah

  I have recently installed Ubuntu for the first time in my life. So I am fairly new to it. I have deleted some files from my home folder. But now the problems have started. The system volume automatically reduces to zero. Further, as soon as I restarted my system, my panel settings we restored to default. When I right click in my home folder, it gives an option of 'restore missing files' but I am not able to restore them. Please guide me how to restore them. Thanks Narendra

  Read the article

• Subversion 1.7 on 12.04 precise: libsasl error, compiling from source?

  - by Andrew Mao

  Background: I am a longtime Gentoo user, and this is my first time using Ubuntu (installed on a VM to avoid compiling everything from scratch). I am familiar with a Linux environment but somewhat unfamiliar with Ubuntu. I am trying to install Subversion 1.7 on Ubuntu and saw this post: Where can I find a Subversion 1.7 binary? The above post recommends using the PPA ppa:dominik-stadler/subversion-1.7. I also found the PPA ppa:svn/ppa from another link. They both cause problems for me. The issue is that any svn operation using the remote server causes the following error: svn: E170001: Unable to connect to a repository at URL 'svn+ssh://my_repo' svn: E170001: Could not create SASL context: generic failure: No such file or directory This seems to arise from a recent bug involving SVN dependency on the libsasl library, as documented by Debian users here: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=683555 and also Mac users here: https://trac.macports.org/ticket/34861 Resolution seems to involve either updating the cyrus-sasl or libsasl library to a newer version (neither of which is in the latest apt packages), or compiling subversion without SASL support. As a Gentoo user I started looking into how to compile svn from source, but it looks way more complicated on Ubuntu than I'm used to and I'm not sure what the canonical way is. My questions: Is there an obvious fix for this problem that I am overlooking? Is there a way to update the dependencies for SVN to something that works through using synaptic or apt-get? If I want to compile from scratch, how do I use the sources in the PPA instead of downloading my own source copy (i.e. the PPA has both binary and sources?)

  Read the article

• How to get the native version of Spotify running?

  - by Dante Ashton

  A while ago Spotify (the streaming music service) came out with a preview for Linux of their client. I had succesfully run it throughout 10.04. Now I'm on 10.10, I can't seem to find it in the package manager, let alone install it. Software Sources gives me this; Failed to fetch http://repository.spotify.com/dists/stable/Release Unable to find expected entry non-free/source/Sources in Meta-index file (malformed Release file?) Some index files failed to download, they have been ignored, or old ones used instead. So...as I'm paying for Spotify what...umm...do I do? :P

  Read the article

• How to make bash quit tab autocompleting hidden directories

  - by Kristopher Micinski

  Most of the time, I don't need autocompletes for my hidden directories. In fact, that's the point of them being hidden! However, annoyingly, bash takes these directories into account when considering tab autocompletion. This is particularly annoying when I have the following scenario: a .svn foler along with a single folder that I want to traverse into by simply pushing tab. (This typically comes up with deep Java packages...) Is there any way to change the default behavior? Worst case scenario I have to type '.' before tab, which seems like a no brainer for my usability.

  Read the article

• Ubuntu 13.10 gives "Package 'libapache2-mod-auth-mysql' has no installation candidate" error

  - by John Crawford

  I'm trying to install my LAMP environment on Ubuntu 13.10 using my script file that can be found here. That script worked for Ubuntu 12.04, Ubuntu 13.04 but when I try it on Ubuntu 13.10 it gives the following error: E: Package 'libapache2-mod-auth-mysql' has no installation candidate Any idea on how to fix this? Note, I do want this package to be installed. EDIT: I've found out now that the reason this could not be installed was because it needed the following two packages that were missing: libmysqlclient16 and apache2.2-common. Do I just need to install these packages or were they removed for a reason?

  Read the article

• Networking- Wireless and Wired not working

  - by JJ White

  So everything in Ubuntu has been working great until networking stopped working. I've spent the better part of two days scouring for a fix with no luck. Here is my info...your help would so be appreciated. grep -i eth /var/log/syslog | tail Sep 25 16:31:59 jj-laptop NetworkManager[970]: <info> (eth0): cleaning up... Sep 25 16:31:59 jj-laptop NetworkManager[970]: <info> (eth0): taking down device. Sep 25 16:31:59 jj-laptop kernel: [23403.998837] sky2 0000:02:00.0: eth0: disabling interface Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): now managed Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): bringing up device. Sep 25 16:35:54 jj-laptop kernel: [23413.629424] sky2 0000:02:00.0: eth0: enabling interface Sep 25 16:35:54 jj-laptop kernel: [23413.635703] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): preparing device. Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): deactivating device (reason 'managed') [2] and then ifconfig -a eth0 Link encap:Ethernet HWaddr 00:17:42:14:e9:e1 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:4605 errors:0 dropped:0 overruns:0 frame:0 TX packets:287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:315161 (315.1 KB) TX bytes:63680 (63.6 KB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:13018 errors:0 dropped:0 overruns:0 frame:0 TX packets:13018 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:880484 (880.4 KB) TX bytes:880484 (880.4 KB) wlan0 Link encap:Ethernet HWaddr 00:13:02:d0:ee:13 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) also iwconfig lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. and of course sudo lshw -C network *-network description: Ethernet interface product: 88E8055 PCI-E Gigabit Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 12 serial: 00:17:42:14:e9:e1 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A latency=0 link=no multicast=yes port=twisted pair speed=1Gbit/s resources: irq:44 memory:f0000000-f0003fff ioport:2000(size=256) memory:c0a00000-c0a1ffff *-network DISABLED description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d0:ee:13 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.2.0-31-generic firmware=15.32.2.9 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:45 memory:c0100000-c0100fff last but not least lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 dm_crypt 22528 0 rfcomm 38139 0 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 snd_hda_codec_idt 60251 1 pcmcia 39791 0 joydev 17393 0 snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 yenta_socket 27428 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event pcmcia_rsrc 18367 1 yenta_socket wacom_w8001 12906 0 irda 185517 0 arc4 12473 2 iwl3945 73111 0 iwl_legacy 71134 1 iwl3945 mac80211 436455 2 iwl3945,iwl_legacy cfg80211 178679 3 iwl3945,iwl_legacy,mac80211 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq dm_multipath 22710 0 pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc psmouse 96619 0 apanel 12718 0 serport 12808 1 serio_raw 13027 0 crc_ccitt 12595 1 irda mac_hid 13077 0 snd 62064 15 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_t imer,snd_seq_device input_polldev 13648 1 apanel soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm lp 17455 0 fujitsu_laptop 18504 0 parport 40930 3 parport_pc,ppdev,lp dm_raid45 76451 0 xor 25987 1 dm_raid45 dm_mirror 21822 0 dm_region_hash 16065 1 dm_mirror dm_log 18193 3 dm_raid45,dm_mirror,dm_region_hash sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci sky2 49545 0 i915 414939 3 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915

  Read the article

• Cannot connect to postgresql on port 5432

  - by Assaf Lavie

  I installed the Bitnami Django stack which included PostgreSQL 8.4. When I run psql -U postgres I get the following error: psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? PG is definitely running and the pg_hba.conf file looks like this: # TYPE DATABASE USER CIDR-ADDRESS METHOD # "local" is for Unix domain socket connections only local all all md5 # IPv4 local connections: host all all 127.0.0.1/32 md5 # IPv6 local connections: host all all ::1/128 md5 What gives? "Proof" that pg is running: root@assaf-desktop:/home/assaf# ps axf | grep postgres 14338 ? S 0:00 /opt/djangostack-1.3-0/postgresql/bin/postgres -D /opt/djangostack-1.3-0/postgresql/data -p 5432 14347 ? Ss 0:00 \_ postgres: writer process 14348 ? Ss 0:00 \_ postgres: wal writer process 14349 ? Ss 0:00 \_ postgres: autovacuum launcher process 14350 ? Ss 0:00 \_ postgres: stats collector process 15139 pts/1 S+ 0:00 \_ grep --color=auto postgres root@assaf-desktop:/home/assaf# netstat -nltp | grep 5432 tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN 14338/postgres tcp6 0 0 ::1:5432 :::* LISTEN 14338/postgres root@assaf-desktop:/home/assaf#

  Read the article

• Trying to do a batch rename, can't figure out the proper RegEx

  - by trezy

  I'm trying to rename my movie collection. All of the files are currently named using dots instead of spaces, i.e. Men.in.Black.avi. I want to replace all of the dots with spaces which isn't terribly difficult, but I need to preserve the last dot for the file extension, i.e. .avi, .mp4, .ogg, etc. My Googling has provided no solutions. I'm also a Javascript developer and could see some snazzy applications for it. So, any suggestions?

  Read the article

• Flashing screen during videos and games

  - by Collif

  I recently switched from Vista to Ubuntu 12.10 on my HP laptop and I've been having issues with my graphics. Everything is fine till I watch a video/play a game or (sometimes) when I visit the software centre. At that point large portions of the screen start flashing and everything gets rather slow. I'm looking for a way to remedy this. For reference I'm using Firefox and I'm unsure what my video card is because it's listed as unknown when I check my system settings.

  Read the article

• Cannot install mysql-server on ubuntu 11.10 by either synaptic or terminal

  - by roopunk

  I've been facing this problem with installing some other packages too. Inside terminal I type: sudo apt-get install mysql-server and I get the following: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libhtml-template-perl mysql-server-5.1 mysql-server-core-5.1 Suggested packages: libipc-sharedcache-perl tinyca mailx The following NEW packages will be installed: libhtml-template-perl mysql-server mysql-server-5.1 mysql-server-core-5.1 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 6,260 kB/11.0 MB of archives. After this operation, 25.8 MB of additional disk space will be used. Do you want to continue [Y/n]? Y Err http://ubuntu.oss.eznetsols.org/ubuntu/ oneiric-updates/main mysql-server-5.1 i386 5.1.63-0ubuntu0.11.10.1 Connection failed Err http://ubuntu.oss.eznetsols.org/ubuntu/ oneiric-security/main mysql-server-5.1 i386 5.1.63-0ubuntu0.11.10.1 Connection failed Failed to fetch http://ubuntu.oss.eznetsols.org/ubuntu/pool/main/m/mysql-5.1/mysql-server-5.1_5.1.63-0ubuntu0.11.10.1_i386.deb Connection failed E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? On trying to install with synaptic package manager, I get the following screenshot I am bascially trying to setup LAMP. Any help/suggestion would be great. Thanks.

  Read the article

• Unity 3d support for multiple X-screens

  - by stewbond

  I've installed Ubuntu 12.04 this weekend and have had problems getting Unity3d to work with my triple monitor set-up. I've installed the latest nVidia drivers for my 2 nVidia video cards and have used NVIDIA X Server Settings to configure everything. If I stick each monitor on a separate X screen, all but the primary X screen will appear white and the cursor will be a black X. I can start a terminal on this screen but cannot drag other windows to it. If I kill the "Nautilus" process, the white background disappears and I see my desktop background, but my cursor is still an X and I still cannot drag windows to it. If I enable TwinView, I can get one screen on two monitors to work properly, but the white screen remains on my third monitor. In addition, I don't like using TwinView because my full-screen applications get stretched. My current solution is to "Enable Xinerama", use all separate X screens and revert to Unity2d. I'd love a solution to this as Ubuntu 12.10 is not planned to support Unity-2d and prefer the aesthetics of 3d anyways. I can provide Xorg.conf for all configurations and any other suggested diagnostic information. Below is my closest-to-working xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" RightOf "Screen2" Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Microvitec PLC MV191" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "Microvitec PLC MV191" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Unknown" ModelName "Microvitec PLC MV191" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTS 450" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9500 GT" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTS 450" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device3" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTS 450" BusID "PCI:1:0:0" Screen 2 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-2: 1280x1024_75 +0+0; DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Device3" Monitor "Monitor3" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Other people have had similar issues. I haven't been successful at any of the few suggestions submitted. Can not get Dual Monitors to work on Different GPUs http://askubuntu.com/questions/30412/3-monitors-with-2-video-cards-not-working?rq=1 How to get second display to work alongside primary display? http://askubuntu.com/questions/148007/multiple-monitors-only-work-with-unity-2d/201086#201086 xorg.conf and Unity3D?

  Read the article

• error while loading shared libraries; cannot open shared object file: No such file or directory

  - by glitchyme

  The program evince complains that it can't find libfreetype.so.6; however I clearly have the file and its included in my LD_LIBRARY_PATH; furthermore I have another program which uses libfreetype6 and is able to run just fine. What's going on here? jbud@jb-pc ~> evince evince: error while loading shared libraries: libfreetype.so.6: cannot open shared object file: No such file or directory jbud@jb-pc ~> ldd /usr/bin/evince | grep freetype libfreetype.so.6 => /usr/local/lib/libfreetype.so.6 (0x00007f912179d000) jbud@jb-pc ~> file /usr/local/lib/libfreetype.so.6 /usr/local/lib/libfreetype.so.6: symbolic link to `libfreetype.so.6.11.1' jbud@jb-pc ~> file /usr/local/lib/libfreetype.so.6.11.1 /usr/local/lib/libfreetype.so.6.11.1: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, BuildID[sha1]=0x21a4b8005e0c9a42af001b35fb984f4e25efc71c, not stripped jbud@jb-pc ~> echo $LD_LIBRARY_PATH /usr/lib/:/usr/lib64/:/usr/lib/x86_64-linux-gnu/:/usr/local/lib/ jbud@jb-pc ~> ldd jdrive/jstuff/work/personal/noengine/client | grep freetype libfreetype.so.6 => /usr/local/lib/libfreetype.so.6 (0x00007feb5ac89000)

  Read the article

• Macbook Pro 13" Retina (10,2): Keyboard and Touchpad don't work correcltly

  - by Dirk

  I'm dealing with Ubuntu since about 5 years and installed it on several laptops. Now I'm stuck when trying to install Ubuntu 12.04.1 on a brand new Macbook Pro 13" Retina (10,2). I sucessfully can start Ubuntu from an USB stick, the Ubuntu desktop is visible, a mouse cursor is visible. But there is no respond to keyboard or touchpad input. So I cannot really install Ubuntu on the Macbook. The details of my approach: Prepare an empty USB stick Download "ISO 2 USB EFI Booter for Mac" and copy the file bootX64.efi to the USB drive as /efi/boot/bootX64.efi. Download Ubuntu 12.04.1 Desktop for Mac from http://cdimage.ubuntu.com/releases/1-amd64+mac.iso and copy the iso the USB drive as /efi/boot/boot.iso Put the USB stick into the Macbook Press and hold the "alt" button while switching the Macbook on Select "EFI Boot" from the boot menu that appears and press the Return / Enter key Immediately a black terminal screen appears with the headline "Welcome to the Ubuntu ISO << - EFI booter". 30 seconds later the familiar Ubuntu startup graphics screen is showing. Further 20 seconds later Ubuntu has started and the desktop is visible - in wonderfully fine resolution Now the computer does not respond to any actions on the touchpad nor the keyboard Who did install Ubuntu on this Macbook Pro 13" Retina (10,2) successfully? On this site https://help.ubuntu.com/community/MacBookPro this unit is not listed yet, anyway. Any help would be greatly appreciated! Dirk PS: I could now install ubuntu with an external USB Keyboard/Mouse Set. But now, after showing the grub menu, a kernel panic error appears and booting stops :-/ Seems that the ubuntu images fit not to a macbook pro retina 13" (10,2) yet. PPS: Ok, there are new facts: If I edit the boot options and enter " nomodeset noapic" ubuntu starts and Keyboard and Touchpad work! Now I have to enable WiFi... PPPS: After installing Broadcom firmware from USB Live stick as described in other posts, WiFi was enabled. Then I could update ubuntu normally to 12.10. After this, I must not enter "nomodeset noapic" in the grub menu anymore. Last Thing now is the Touchpad. The driver seems not to be there. The touch pad is only showing as mouse. t.b.c.

  Read the article

• Port listening on localhost:8000 but not on ip:8000

  - by Marionette

  Hello I'm running a web application on port 8000. When I access it from the host server localhost:8000 it responds ok, 127.0.0.1:8000 also works, but 192.168.1.7:8000 does not work. 192.168.1.7 is the ip of my server. Also if i try to go to another web application running on port 80 it works 192.168.1.7 I enabled ufw firewall and set ufw default allow. I am using ubuntu server 12.04 Any suggestions on why I can't get to my app on port 8000 using the ip-address:8000? Thanks in advance!

  Read the article

• Terminal Errors/Package Erros

  - by Bryan

  After running some updates a week ago or so, I've noticed that after any installations via the Ubuntu Software Center or any installed in the GUI have given an error message stating that there was a package error. Also any installations done through the terminal have given the E: Sub-process /usr/bin/dpkg returned an error code (1) message at the end of each install. Oddly, the software is still installed and seems to function properly. Is there any way to get rid of this? I've tried to run apt-get autoclean as recommended on another site, but this doesn't seem to work. I'm fairly new to Linux/Ubuntu, just FYI.

  Read the article

• Unity 3D (with Nvidia driver) becomes very slow and laggy

  - by Graham

  How can I prevent my Unity 3D desktop from becoming slow after a while, given that I have an Nvidia Quadro NVS 290 graphics in TwinView mode? The desktop starts out fast on login, but becomes slow / lagging / hesitant / high latency after a while, symptoms being spikes in CPU usage by /usr/bin/X whenever I cause any graphical activity with the mouse or keyboard (e.g. typing, changing tabs, dragging windows). The desktop remains slow even with all windows (except htop in Terminal) and extraneous processes killed. Detail: Changing tabs in Terminal takes about a second, and X spikes to 76% CPU. As I type into Firefox, X spikes to 95% CPU. Dragging Termiinal window, X goes to 70% CPU. Basically, every graphical action sends CPU usage of X through the roof. Device: Nvidia Quadro NVS 290 Driver package: binary driver nvidia-current-updates (280.13-0ubuntu5) Dual Monitors: Pair of DELL UltraSharp 1908FP in TwinView (X screen 2560x1024) OS: Fresh install of Ubuntu 11.10 amd64 Desktop with all updates. Hardware: Dell Precision T5400 Workstation Pastebin of Xorg.0.log Pastebin of xorg.conf Pastebin of nvidia-xconfig -t output (easier to read than xorg.conf) Output of /usr/lib/nux/unity_support_test -p: To obtain the following htop screenshow I typed "asdf" several times in in this text box, alt-tabbed to Terminal and took a screenshot of the high X CPU usage. This also happens when firefox is not running: Quadro NVS 290 has "No" thermal sensor according to sensors-detect: Next adapter: NVIDIA i2c adapter 0 at 2:00.0 (i2c-0) Do you want to scan it? (YES/no/selectively): Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No P robing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) I tried the nouveau driver by disabling the nvidia-current-updates under Additional Drivers, but Ubuntu and xrandr -q fail to detect the second monitor. This may be issue 737349. Funniest thing is that Nouveau wiki says that XRandR 1.2 dual-monitor is supported so it should work with a second monitor.

  Read the article

• ath9k driver does not weak up

  - by shantanu

  I know this is common question but i found no suitable answer, so i am asking this again. I installed ubuntu 11.10. I found the bug for ath9k, so set first network boot from BIOS menu. That's worked. I have upgraded to 12.04 yesterday. Now ath9k is creating problem again. First network boot is still enable. ath9k works at start. But failed(connect again and again) after couple of minutes. dmesg show error that it can not weak up in 500us. So i tried #compat-wireless-3.5.1-1. But result is same. I have also added #nohwcrypt=1 option in /etc/modeprob.d/ath9k.conf. Still no luck. I tried #rmmod and then modprobe sudo modprobe ath9k nohwcrypt=1 dmesg shows me error: [ 400.690086] ath9k: Driver unloaded [ 406.214329] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 406.214348] ath9k 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 406.214368] ath9k 0000:06:00.0: setting latency timer to 64 [ 406.428517] ath9k 0000:06:00.0: Failed to initialize device [ 406.428852] ath9k 0000:06:00.0: PCI INT A disabled [ 406.428887] ath9k: probe of 0000:06:00.0 failed with error -5 dmesg error when driver fail: 355.023521] ath: Chip reset failed [ 355.023524] ath: Unable to reset channel, reset status -22 [ 355.023556] ath: Unable to set channel [ 355.088569] ath: Failed to stop TX DMA, queues=0x10f! [ 355.122708] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff [ 355.122714] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up [ 355.263962] ath: Chip reset failed [ 355.263966] ath: Unable to reset channel (2437 MHz), reset status -22 [ 358.996063] ath: Failed to wakeup in 500us [ 364.004182] ath: Failed to wakeup in 500us I can not install fresh ubuntu because i have lots of application installed. System : Acer Aspire 4250 AMD dual core 1.6GHZ Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) EDITED Now i am in serious problem. No wifi device is not showing in ifconfig or lshw commands. Only ether-net interface shows. I tried (FN + WIFI) several times to enable the device but nothing helps. Now I have installed fresh ubuntu 12.04. Please help lshw -c network: *-network description: Ethernet interface product: 82566DC Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 02 serial: 00:19:d1:7a:8e:f9 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.0.0-k duplex=full firmware=1.1-0 ip=192.168.1.114 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:90300000-9031ffff memory:90324000-90324fff ioport:20c0(size=32) rfkill command does not show anything but no error.

  Read the article

• Mounting with Nautilus works but fstab gives "Host is down" error?

  - by Annan

  I'm connecting to my university's VPN so I can connect to the network drive. The VPN seems to be working fine and I can connect to the drive by typing the address into Nautilus and entering my login details: smb://139.___.___.140/home However, this fstab entry doesn't work: //139.___.___.140/home /media/___ cifs domain=CS,username==___,password=___,uid=sai,gid=sai 0 0 Nor does manually mounting it: sudo mount -t cifs //139.___.___.140/home /media/___ -o domain=CS,username=___,password=___,uid=sai,gid=sai,user The only error it gives is: mount error(112): Host is down Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) It's obvious the host isn't down since I can view the share from Nautilus. Why is Nautilus mounting it fine but not the normal mount command? What could cause this error?

  Read the article

• Difference between LiveCD, LiveUSB, full-install, and persistence?

  - by Jay

  I am currently running Ubuntu as a guest vm on a Win 7 host via VirtualBox, but I would like to have a portable version of Ubuntu when I am not using my laptop. I am unsure as to the difference between the following: 1)LiveCD with persistence; 2)LiveCD without persistence; 3)LiveUSB with persistence; 4)LiveUSB without persistence; 5)Full-install. I have a USB flash drive (32GB), and I also have empty DVDs lying around. I know that persistence means that data can be saved, but I am unsure as to which option to choose. What is the difference between a LiveUSB and a full-install on a USB thumbdrive and why would I want to pick one over the other? Thanks for any help.

  Read the article

• Ubuntu One Installation error - W:Failed to fetch cdrom://Ubunto 12.04.2 LTS_Precise

  - by Chuck J

  W:Failed to fetch cdrom://Ubunto 12.04.2 LTS_Precise Pangolin_-Release amd64(20130213)/dists/precise/main/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT.apt-get update cannont be used to add new CD-ROMs, W:Failed to fetch cdrom://Ubuntu 12.04.02 LTS_Precise Pangolin_-Release amd64(201302213)/dists/precise/restriced binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT.-get update connot be used to add new CD-ROMs, E:Some index files failed to download they have been ignored, or old ones used instead. Yes my laptop CD-ROM is not working, and I ASSUME that has something to do with this install not working. I don't want to have to fix my CD-ROM drive to get this to install, and my BIOS does not support disabling it... Any idea's?

  Read the article

• How does the PPA fit into the scenario of publishing an application to the Ubuntu Software Center?

  - by Mridang Agarwalla

  I've been going through docs for the past couple of hours but I haven't understood what the PPA is? I have a cross-platform Java application that I'd like to publish to the Ubuntu Software Center. My application is open-source and I'm using Github. Apparently, publishing applications to the store isn't as simple as uploading a deb package - am I right? I need to create an account on Launchpad and put all my code there. I don't intend to move from Git to Bzr merely for the sake of publishing to the app store but luckily, one is able to set up source-code mirroring from Github to Launchpad. Since my application is still very premature, it'll have updates fairly often. When I build my application on my machine, do I simply go my Ubuntu App Developer page and upload the new DEB package or do they build my application from source? What exactly is the PPA for? I don't think I'll need too many of the Launchpad features so I'd like to stick to Github if possible. (Publishing for Ubuntu really isn't trivial. I can see why there are so many developers out there who haven't published their applications to the Ubuntu Software Center. Publishing an Android applications has been the easiest so far.)

  Read the article

• Winetricks fails to find program files directory

  - by EgyptLovesUbuntu

  I installed a fresh copy of Ubuntu 12 desktop then: Installed WINE from the Ubuntu Software Center. Installed WineTricks from the Ubuntu Software Center. When I type the following commands in the terminal: sudo winetricks dotnet40 I get this error message: wine cmd.exe /c echo '%ProgramFiles%' returned empty string If i try the command without sudo winetricks dotnet40 The output is as follows Executing w_do_call dotnet40 Executing load_dotnet40 ------------------------------------------------------ dotnet40 does not yet fully work or install on wine. Caveat emptor. ------------------------------------------------------ Executing mkdir -p /home/vectoruser/.cache/winetricks/dotnet40 mkdir: cannot create directory `/home/vectoruser/.cache/winetricks/dotnet40': Permission denied ------------------------------------------------------ Note: command 'mkdir -p /home/vectoruser/.cache/winetricks/dotnet40' returned status 1. Aborting. ------------------------------------------------------ My current user is vectoruser which i use to logon to Ubuntu The output of ls -ld /home/vectoruser /home/vectoruser/.cache /home/vectoruser/.cache/winetricks Gives: drwxr-xr-x 32 vectoruser vectoruser 4096 Aug 2 19:26 /home/vectoruser drwx------ 19 vectoruser vectoruser 4096 Aug 2 19:25 /home/vectoruser/.cache drwxr-xr-x 2 root root 4096 Aug 2 18:09 /home/vectoruser/.cache/winetricks

  Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >