Search Results

Search found 25718 results on 1029 pages for 'external hard drive'.

Page 121/1029 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

  • HDDs randomly falling off raid

    - by michael
    I really need help on this it's Saturday long weekend.No customer service help:( .I recently build new server/light duty desktop.Main purpose is only file sharing.Raid configuration :Adaptec 6805 ,8x 3TB HDD WD Red,Intel RES2SV240 expander,Raid 6,set in Intel mobo DZ 77GA-70K.I upgraded firmwares, but I'm having strange problem. During Build Verify segment 7 got missing.I just reinsert drive into hot swap bay and it started to rebuild Array.After rebuild was done another segments 0 and 5 gone missing while build/verify.I reinserted drives and now I'm praying that raid is going to rebuild successfully from remaining 6 drives,because i already transfer some data on it(I know it was bad idea).I checked S.M.A.R.T on missing drives , it only says link failure and aborted commands on one of them.No Errors on HDDs.Connections and cables are good.I added 2 fans blowing on RAID controller because it was getting too hot, so I guess overheating shouldn't be issue.What can be possibly wrong? Thank you for help.

    Read the article

  • Windows XP drives not opening

    - by SpiXel
    I had a PC which operating system was Windows XP , I reinstalled the Windows , formatting just the C drive , and had my new version of XP installed there , but when it was installed and I tried to open the other drives (meaning for example D , E , .. ) I got this error : i9wjpqc.exe has encountered a problem and needs to close I trying googling it , and I ended up with knowing it's a malware, so my guess is that my previous OS had this malware on its other drives and the source was located in C , now that I've formatted C , other drives still have the malware, so they can't be opened :( and suggestion to get the drives to open ?

    Read the article

  • Three disk (possibly RAID) data recovery

    - by Martin
    I have on my desk three 160 GB disks that were once part of an HP Proliant Windows 2003 Server. They may have been part of a RAID configuration of some sort. They may or may not be damaged in some way. When I interface them via USB, one of them shows up as a drive, but unformatted. The others show up as uninitialized disks in manager. An alternative explanation is that the two drives were simply not unused. What's my first step? I've recovered data off damaged drives before but never had anything to do with RAID configs. How can I even tell if any type of RAID was used?

    Read the article

  • Question about getting information off an old HD...

    - by user37983
    Ok so my old cpu was a sony vaio. its kinda old and had xp on it. My gf thrashed it - the cd drive went and she tried fixing it by messing with the configurations bios etc. the actual laptop is really fried the keyboard doesnt work, etc. However the harddrive is still intact. I tried putting the HD in my new cpu (toshiba runnig win7) and it looks like its gonna boot up it goes to the screen with the logo and the status bar starts to load. then it flashes a blue screen for a split second, and goes to the black screen where it says windows did not shut down properly and gives options to (start windows normally, safe mode, safe mode with networking, safe mode with prompts) ive tried every option but it always goes back to this screen. I need to get into the hd cuz i have very important files. is there anyway?

    Read the article

  • USB port not working

    - by sharza
    Everytime I put pendrive in the USB port(all ports in my computer) it doesnt work especially when plug the USB Flash Drive, but after several hours it work again. But When I try to open this pen drive data on other computers, I'm able to open & work ... So definitely there is no problem with my pen drive. and I've enabled USB keyboard & mouse in Bios. I using windows xp and using USB 2.0 Please help ...

    Read the article

  • I suspect that my HDD is causing hardlocks, as all other components have been replaced. How can I check this theory and solve the potential cause?

    - by user867814
    I have had this problem over quite a while now, thorough multiple Linux kernel versions and distributions, as well as replacement of all components, aside from my main HDD - RAM, GPU(twice), mother board, CPU, power supply. What happens is, at one point during the operation of the PC, it will hardlock - everything stops working, external HDD is not shut down correctly and continues to spin until I plug it out and in, there are no system/kernel logs of any kind, and no otherwise nothing that would suggest a cause. Another reason for my suspicion is that the failures happen almost exclusively during HDD read/write activity - shutdown(happens nearly 1/3 of the time so far, it's only been few days though), launching programs, and once during operation of apt. I hope the post is descriptive enough, if you need any additional info, ask(and tell me how to prepare/obtain it), and I will provide. If I'm wrong, point me in the right direction. Thanks in advance.

    Read the article

  • USB Permission - Write protection

    - by dekhadmai
    I have an external harddisk and my friends asked for it. The point is I don't trust in his anti-virus software. Is there anyway to allow some folders (I prepare hdd space for him) to write-able and all others is read-only ? or is there a software that can do like this ? And it would be great if I can have full access on my computer ONLY (may be with some specific software on my PC) and without having to modify anything. I don't ask for hdd-encryption since I only want to limit the area of write-able folder (and allow my friend to read through all my data), later I can scan for virus myself only in that area ... scanning entire hdd with 500gb/friend is not fun at all ! Sorry if this doesn't seems like the programming questions. Any help would be appreciate, Thank you.

    Read the article

  • How do I restore a Windows 8 iso image to a USB disk in OS X?

    - by duci9y
    I am on OS X and have a Windows 8 Consumer Preview x64 image. My computer doesn’t have a CD drive (MacBook Air). I have a 4 GB USB drive. I want to restore that image to the USB drive. There are many tools to do that on Windows, but I can’t finger out how to do it in OS X. Please note that I can’t run a VM, as my Air is a limited use machine. What I’ve tried: Simply restore to USB. Convert the image to img and use dd. These don’t work. How do I go about doing this?

    Read the article

  • Uninstalling hard deleted application from Windows7

    - by Gnanasuriyan A
    Unfortunately, I have hard deleted the microsoft sql server folder present in program files folder. So now I need to uninstall the MSSQL server from my machine. I have tried but I got an error something like "The source folder is missing". For resolving this issue, I have manually deleted the MS SQL services using "sc delete" command and I have deleted the MSSQL entry from regedit file also. But still MS SQL server entry available in "Programs and Features" list. Please guide me for solving this issue even I can't able to re install the MSSQL server once again. Thank you guys... Gnanasuriyan A.

    Read the article

  • How to copy data (clone) from one partition to another in Windows XP?

    - by Martin
    I have installed a new hard drive in our PC running Windows XP and I wonder how to transfer the data from the old (small) data partition to the new (large) one. My question concerns only a data partition containing files and folders (not the boot partition with the Operating System files!) Is it ok to just copy the folders in the Windows XP Explorer to the new partition? Could anything be lost this way (hidden folders, metadata, ..)? What is the best way to clone a data partition in Windows XP?

    Read the article

  • how to recover data from my disk - I accidentally copied with dd an iso on it

    - by sijoune
    I wanted to create a bootable usb from an iso image and i accidentally put as the output of the dd, instead of my usb drive, one of my hard disks. The iso was 3,3 GB and my disk is 1TB! And it was almost full. Can i at least restore the data that has not been overwritten? Right now i can't even mount it. I get this error: Error mounting /dev/sdd1 at /media/main/UDF Volume: Command-line `mount -t "udf" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,iocharset=utf8,umask=0077" "/dev/sdd1" "/media/main/UDF Volume"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdd1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Also since i know which filesystem my disk used if i reformat it to this filesystem is there any chance i can mount it and retrieve the rest of the files?

    Read the article

  • Have two partitions in RAID1

    - by mateikav
    The answers are unclear wherever I look. I have two 2TB drives for a RAID1 and I want to mirror them while having two partitions on the drives. One partition will be 100GB and contain programs, the other partition will be 1.8TB and contain personal files. Some may ask why? The answer is that my programs are currently on another older drive and I want to save time and pain uninstalling and re-installing critical programs while merely copying them to the new drives via Shadowcopy. When I create the RAID1, will both partitions be mirrored? Is this possible? I am sorry if I am being confusing or unclear.

    Read the article

  • Recover snap server data

    - by Ugg
    Hi I have a snap server 110 the machine powers on ok and the healthcheck passes but unable to connect no responce on the assigned ip or any ability to reach the device via the snap server manager. Believe the device is powering on but not loading the OS. Tried pulling the disk running and hooking up to a windows PC via USB, and using disk internals linux reader I am unable to access two of the partitions. ( one of which is the large data partition). There are three partitions on the the drice only one is accessible via Linux reader. I am looking to recover the data of the drive can anyone suggest a DIY option please?

    Read the article

  • Restoring a backup SQL Server 2005 where is the data stored?

    - by sc_ray
    I have two Sql Server database instances on two different machines across the network. Lets call these servers A and B. Due to some infrastructural issues, I had to make a complete backup of the database on server A and robocopy the A.bak over to a shared drive accessible by both A and B. What I want is to restore the database on B. My first issue is to restore the backup on server B but the backup location does not display my shared drive. My next issue is that server B's C: drive has barely any space left and there are some additional partitions that have more space and can house my backup file but I am not sure what happens to the data after I restore the database on B. Would the backup data fill up all the available space on C:? It will be great if somebody explain how the data is laid out after the restore database is initiated on a target database server? Thanks

    Read the article

  • How to Create Shortcuts to Programs on USB Drives

    - by Lori Kaufman
    If you work on multiple computers, you probably use a USB drive to take your favorite portable software with you. Portable application suites like PortableApps.com, CodySafe, or Lupo PenSuite, each have a main menu providing access to the programs installed into the suite. However, there may be reasons why you need to create shortcuts to programs on your USB drive. You may be using a program that does not integrate into the suite’s main menu. Or, you may not be using an official portable application suite at all, and just placing portable software in a folder on your USB drive. Maybe you prefer using shortcuts on the root of the USB drive, like a portable desktop. Whatever your reason, you can’t just create a shortcut to an application on the USB drive and place it in the root of the drive. The shortcut will always refer to the full path of the application, including the drive letter. Different computers assign different drive letters to USB flash drives, so you would have to change the drive letter for your shortcuts when it changes. You can assign a static drive letter to the USB drive. However, if you would rather not do that, there is a way to create shortcuts to programs on a USB drive using relative paths. Because Windows does not support relative paths in shortcuts, we will show you how to create a “shortcut” on the root of a USB drive by creating a batch (.bat) file and converting it to an executable (.exe) file. What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS How To Be Your Own Personal Clone Army (With a Little Photoshop)

    Read the article

  • httpd.conf configuration - for internal/external access

    - by tom smith
    hey. after a lot of trail/error/research, i've decided to post here in the hopes that i can get clarification on what i've screwed up... i've got a situation where i have multiple servers behind a router/firewall. i want to be able to access the sites i have from an internal and external url/address, and get the same site. i have to use portforwarding on the router, so i need to be able to use proxyreverse to redirect the user to the approriate server, running the apache/web app... my setup the external urls joomla.gotdns.com forge.gotdns.com both of these point to my router's external ip address (67.168.2.2) (not really) the router forwards port 80 to my server lserver6 192.168.1.56 lserver6 - 192.168.1.56 lserver9 - 192.168.1.59 lserver6 - joomla app lserver9 - forge app i want to be able to have the httpd process (httpd.conf) configured on lserver6 to be able to allow external users accessing the system (foo.gotdns.com) be able to access the joomla app on lserver6 and the same for the forge app running on lserver9 at the same time, i would also like to be able to access the apps from the internal servers, so i'd need to be able to somehow configure the vhost setup/proxyreverse setup to handle the internal access... i've tried setting up multiple vhosts with no luck.. i've looked at the different examples online.. so there must be something subtle that i'm missing... the section of my httpd.conf file that deals with the vhost is below... if there's something else that's needed, let me know and i can post it as well.. thanks -tom ##joomla - file /etc/httpd/conf.d/joomla.conf Alias /joomla /var/www/html/joomla <Directory /var/www/html/joomla> </Directory> # Use name-based virtual hosting. #NameVirtualHost *:80 # NOTE: NameVirtualHost cannot be used without a port specifier # (e.g. :80) if mod_ssl is being used, due to the nature of the # SSL protocol. # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for requests without a known # server name. #<VirtualHost *:80> # ServerAdmin [email protected] # DocumentRoot /www/docs/dummy-host.example.com # ServerName dummy-host.example.com # ErrorLog logs/dummy-host.example.com-error_log # CustomLog logs/dummy-host.example.com-access_log common #</VirtualHost> NameVirtualHost 192.168.1.56:80 <VirtualHost 192.168.1.56:80> #ServerAdmin [email protected] #DocumentRoot /var/www/html #ServerName lserver6.tmesa.com #ServerName fforge.tmesa.com ServerName fforge.gotdns.com:80 #ErrorLog logs/dummy-host.example.com-error_log #CustomLog logs/dummy-host.example.com-access_log common #ProxyRequests Off ProxyPass / http://192.168.1.81:80/ ProxyPassReverse / http://192.168.1.81:80/ </VirtualHost> <VirtualHost 192.168.1.56:80> #ServerAdmin [email protected] DocumentRoot /var/www/html/joomla #ServerName lserver6.tmesa.com #ServerName fforge.tmesa.com ServerName 192.168.1.56:80 #ErrorLog logs/dummy-host.example.com-error_log #CustomLog logs/dummy-host.example.com-access_log common #ProxyRequests Off </VirtualHost>

    Read the article

  • dvd drive I/O error?

    - by bobby
    i get dis error evry time i burn a cd/dvd thru my dvd drive...!! Nero Burning ROM bobby 4C85-200E-4005-0004-0000-7660-0800-35X3-0000-407M-MX37-**** (*) Windows XP 6.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.11.3. Internal Version: 7, 11, 3, (Nero Express) Recorder: Version: UL01 - HA 1 TA 1 - 7.11.3.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: Version: 52PP - HA 1 TA 0 - 7.11.3.0 Adapter driver: HA 1 === Scsi-Device-Map === === CDRom-Device-Map === ATAPI-CD ROM-DRIVE-52MAX F: CdRom0 HL-DT-ST DVDRAM GSA-H12N G: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 958MB (981560kB) Free physical memory: 309MB (317024kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.6.2010 CD Image 10:43:02 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:43:02 AM #2 Text 0 File Burncd.cpp, Line 3186 HL-DT-ST DVDRAM GSA-H12N Buffer underrun protection activated 10:43:02 AM #3 Text 0 File Burncd.cpp, Line 3500 Turn on Disc-At-Once, using CD-R/RW media 10:43:02 AM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 318783 ( 70:52.33) 10:43:02 AM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 10:43:02 AM #6 Text 0 File DlgWaitCD.cpp, Line 2988 Recorder: HL-DT-ST DVDRAM G SA-H12N; CDR co de: 00 97 27 18; O SJ entry from: Pla smon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A ( LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 0 0 00 (invalid) 10:43:02 AM #7 Text 0 File DlgWaitCD.cpp, Line 493 Protocol of DlgWaitCD activities: TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318784 blo cks [G: HL-DT-ST DVDRAM GSA-H12N] -------------------------------------------------------------- 10:43:02 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [G: HL-DT-ST DVDRAM GSA-H12N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Se ssion Clo sed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next T rk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 6531768 32, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 318784 | 318784 | 0x00 318784 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:43:02 AM #10 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 10:43:02 AM #11 Text 0 File Burncd.cpp, Line 4286 Caching options: cache CDRom or Network-Yes, small files-Yes ( ON 10:43:03 AM #19 Text 0 File MMC.cpp, Line 18034 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 46 34 22 10:43:03 AM #20 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 83836800 10:43:16 AM #21 Text 0 File Cdrdrv.cpp, Line 1405 10:43:16.806 - G: HL-DT-ST DVDRAM GSA-H12N : Queue again later 10:43:42 AM #22 SPTI -1502 File SCSIPassThrough.cpp, Line 181 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1502) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Nero Report 2 Nero Burning ROM Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 4D 00 00 00 20 00 00 00 Sense Area: 0x70 00 04 00 00 00 00 10 53 29 A1 80 08 03 Buffer x0c7d9a40: Len x10000 0xDC 87 EB 41 6E AC 61 5A 07 B2 DB 78 B5 D4 D9 24 0x8D BC 51 38 46 56 0F EE 16 15 5C 5B E3 B0 10 16 0x14 B1 C3 6E 30 2B C4 78 15 AB D5 92 09 B7 81 23 10:43:42 AM #23 CDR -1502 File Writer.cpp, Line 306 DMA-driver error, CRC error G: HL-DT-ST DVDRAM GSA-H12N 10:43:55 AM #24 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 48x (7,200 KB/s) 10:43:55 AM #25 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:44:01 AM #26 Text 0 File Cdrdrv.cpp, Line 11412 DriveLocker: UnLockVolume completed 10:44:01 AM #27 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon Nero Report 3

    Read the article

  • Can I run Ubuntu Live from a USB flash-drive without destroying the data on it?

    - by Lucian
    I already have a number of files on a flash drive (8 gb) that I would prefer to keep, but I would like to try Ubuntu even if merely for the aesthetics. I use Windows XP. I know that it's definitely possible to run Ubuntu from a bootable drive like my flash drive to try Ubuntu but I would much rather keep my files intact not only on my flash drive but also my hard drive, if that's possible. I also want to know if it's entirely possible that while running Ubuntu from the USB if I can switch back to Windows while my computer is still on. If I'm missing something, please let me know. I'm very grateful for any assistance in this matter.

    Read the article

  • 2-Bay External HDD Enclosure in JBOD mode fails to detect both drives (Linux & Windows)

    - by mgc8888
    I recently purchased a couple of USB 3.0 External HDD Enclosures to use for storage and backup; the idea was to have one act as backup to the other, with 4 x 3TB drives in total. However, the second drive in each is not accessible in either Linux nor Windows, and I could not determine the reason. 1. Situation The two enclosures are slightly different (couldn't find them in stock at the same time) yet from many little details appear to be the same Chinese base design with a tweaked outer shell. The models are: Sharkoon 2-Bay RAID Box Fantec MR-35DU3 The drives are Seagate 3TB Barracuda ST33000651AS, firmware CC44, all identical. From reading manuals and online sources, I determined that JBOD would be the optimal setup for my needs -- addressing the two drives separately in each enclosure would be important, making it easy to swap drives and mix&match them if needed; all the other modes implied the controller doing a combination of the drives. The software used was Debian GNU/Linux - testing/wheezy - kernel 2.6.39-2 and Windows 7 Ultimate. 2. Description of the problem Now, here comes the problem: every time I connect either of the enclosures to a PC using the supplied cable (tried a different one as well), only the HDD in the top bay is readable, the one below is detected yet errors out in various ways. According to the manuals, it should not happen: in JBOD, the system should be able to "see" two separate drives upon connection. This happens with both enclosures and any combination of HDDs (i.e. if I swap them, the same thing happens), so the HDDs are good and I think so are the enclosures (two different companies making similar products that failed in an identical fashion would be very unlikely). The top HDD can be used fine every time, I actually tried a speed test from Linux and got about 150MiB/s reads, so all is working as it should; the one below refuses to work every time. So the failure is consistent. To make sure this was not some obscure Linux bug, I tried the same under Windows 7, and the system also only created one drive letter for a drive of 3TB size (so it was only seeing one instead of both). Placing an older, known good, 2TB drive in the top bay made that the one recognised, so we have the same issue under Windows as well. Log entries under Linux (tested here with a 3TB and a 2TB drive so I could differentiate them; either one works in the top enclosure, in the test setup the 3TB one is on top). You can see them being detected, the top one is ok, but for the bottom one only errors: Jul 19 23:28:15 media kernel: [260150.582436] usb 6-1: New USB device found, idVendor=1ca1, idProduct=18ae Jul 19 23:28:15 media kernel: [260150.582440] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jul 19 23:28:15 media kernel: [260150.582442] usb 6-1: Product: Usb Sata Bridge Jul 19 23:28:15 media kernel: [260150.582444] usb 6-1: Manufacturer: SYMWAVE Jul 19 23:28:15 media kernel: [260150.582446] usb 6-1: SerialNumber: 39584B304C4E3441 Jul 19 23:28:15 media kernel: [260150.870412] scsi11 : usb-storage 6-1:1.0 Jul 19 23:28:16 media kernel: [260151.882087] scsi 11:0:0:0: Direct-Access SYMWAVE ST33000651AS CC44 PQ: 0 ANSI: 4 Jul 19 23:28:16 media kernel: [260151.882242] scsi 11:0:0:1: Direct-Access SYMWAVE ST32000641AS CC12 PQ: 0 ANSI: 4 Jul 19 23:28:16 media kernel: [260151.882677] sd 11:0:0:0: Attached scsi generic sg2 type 0 Jul 19 23:28:16 media kernel: [260151.882774] sd 11:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). Jul 19 23:28:16 media kernel: [260151.882857] sd 11:0:0:1: Attached scsi generic sg3 type 0 Jul 19 23:28:16 media kernel: [260151.882893] sd 11:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Jul 19 23:28:16 media kernel: [260151.883085] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.883582] sd 11:0:0:0: [sdb] Write Protect is off Jul 19 23:28:16 media kernel: [260151.883961] sd 11:0:0:1: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Jul 19 23:28:16 media kernel: [260151.884145] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.884570] sd 11:0:0:1: [sdc] Write Protect is off Jul 19 23:28:16 media kernel: [260151.884855] sd 11:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). Jul 19 23:28:16 media kernel: [260151.885286] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.885807] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.909595] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.910159] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.910163] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.910167] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.910169] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.910172] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.910182] quiet_error: 2 callbacks suppressed Jul 19 23:28:16 media kernel: [260151.910570] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.911153] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.911156] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.911159] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.911161] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.911164] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.911385] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.911902] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.911905] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.911908] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.911910] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.911913] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.912128] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.912650] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.912653] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.912656] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.912657] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.912660] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.912876] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.913439] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.913442] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.913445] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.913446] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.913449] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.945227] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.945863] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.945866] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.945870] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.945871] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.945875] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 (...) and so on for like 10 seconds until it gives up (...) 3. Question So, my question would be: what is causing this? Am I missing something, should I configure things differently, is this a known limitation? Searching online for more information did not yield any useful results... Thank you in advance for any help!

    Read the article

  • Hard Disk DRDY error: is it a crash

    - by pranjal
    I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

    Read the article

  • AS3 - Loader class: Resize external swf to it's original stage size

    - by Rob
    Hi there! Here is my problem (unfortunatelly didn't find solution @google): I'm loading external swf[AS2] into main swf[AS3] using Loader class. The main swf is 800 x 600 and the external swf is 300 x 200. After adding the external swf to the main swf the external swf expands it's size from 300 x 200 to the main swf's size: 800 x 600. How can i prevent this? I want the loaded swf to save it's original size. Cheers Rob

    Read the article

  • Routing an ActiveMq topic to an external broker.

    - by chillitom
    Hi All, I have an ActiveMq topic which I wish to transform and share with an external broker. At present I have the following which performs the transformation: <camelContext id="camel" xmlns="http://activemq.apache.org/camel/schema/spring"> <route> <from uri="activemq:topic:OriginalTopic"/> <to uri="xslt:file:///xslt/transformation.xsl"/> <to uri="activemq:topic:NewTopic"/> </route> </camelContext> However this just sends the message to the current broker network. I'd like to pass the NewTopic messages to an external broker only. I don't want to join the external broker using a <networkConnector .. > as only this topic should be send to the external broker and no others. Is there a simple way to route messages to an external broker? Many thanks.

    Read the article

  • Error launching external scanner info generator (sh -c 'g++ -E -P -v -dD )

    - by kranthikumar
    Error launching external scanner info generator (sh -c 'g++ -E -P -v -dD ) (Cannot run program "make": Launching failed) More precisely, the error messages are: Error Launching external scanner info generator - gcc link problem on MingGW Error launching external scanner info generator (sh -c 'g++ -E -P -v -dD C:/Documents and Settings/user1/workspace123/.metadata/.plugins/org.eclipse.cdt.make.core/specs.cpp ') Error launching external scanner info generator (sh -c 'gcc -E -P -v -dD C:/Documents and Settings/user1/workspace123/.metadata/.plugins/org.eclipse.cdt.make.core/specs.c ') This problem is occurring in eclipse-SDK-3.2.2-win32 with CDT. Can anyone solve this problem? Did anyone have any solution to this problem? Please help to me to solve this problem . Yours faithfully. Anilkumar.k

    Read the article

  • VB Script - Unmount USB drive

    - by user736887
    I have tedious project coming up. I need to insert a usb flash drive into a computer, then copy over three files to that drive, and then unmount it and repeat 3000 times (literally). I was hoping to come up with some VB Script that can reduce my input to just 1.) insert the usb and 2.) double click on the .vbs file and remove the usb flash drive. I figure it isnt too difficult to come up with the copy and paste part of the code as long as I am inserting the usb into the same port every time. Is this assumption correct? However, the real problem is unmounting/ejecting the usb drive. Is there any simple VB Script code that can accomplish this? Thank you, -Corey

    Read the article

  • Did a recent WinXP update break CD/DVD read speeds? SP2/SP3

    - by quack quixote
    I have two systems with fresh installations of Windows XP Pro SP3 (SP3 slipstreamed into the installer; fully updated after install). One's a refurbished 2.4GHz Pentium4 system; the other is a new 1.6GHz Atom330 build. Both have brand-new dual-layer CD/DVD burners (one's a LiteOn IDE, the other an LG SATA). Both take a really looooong time to read a single-layer DVD in Windows with Cygwin tools. Specifically, 40 minutes or more. I burn backup data to single-layer DVD+/-R and use MD5 hashes for data verification (made with the standard md5sum tool in Unix or Cygwin). The hashes are burned to disc with the data files, and I use this command to verify: $ cd /path/to/disc/mountpoint ; time md5sum -c < md5.txt Here's how long that takes to run on a full single-layer DVD+/-R disc: Old system (WinXP SP2, 1.8GHz Athlon 2500+, last summer): ~10 minutes Old system (Ubuntu 9.04, 1.8GHz Athlon 2500+): ~10 minutes Old system (Debian 5, dual 550MHz P3): ~10 minutes New Pentium4 system (running Ubuntu 9.04): ~5 minutes New Pentium4 system (running WinXP SP3, file copy from Win Explorer): ~6 minutes New Atom330 system (running WinXP SP3, file copy from Win Explorer): ~6 minutes Now the weird stuff: Old system (WinXP SP2, 1.8GHz Athlon 2500+, today): ~25 minutes New Pentium4 system (running WinXP SP3, read from Cygwin): ~40-50 minutes (?!!) New Atom330 system (running WinXP SP3, read from Cygwin): ~40 minutes (can do it in ~30 minutes ...if i have another program spin up the drive first) Since both systems will copy files in 6 minutes using Windows Explorer, I know it's not a hardware problem. Windows just never spins up the drive during the Cygwin read, so it stays super-slow the whole time. Other programs like EAC and DVD Decrypter seem to spin up the disc just fine during their processing. DMA is enabled on both systems. (Can confirm in Windows' Device Manager on the Atom330, not on the P4.) Nero's DriveSpeed tool doesn't seem to have any effect. Copy times are comparable from commandline with Windows' xcopy. Copying with Cygwin's cp looks more like the problem state -- it will spin up the drive for a short time, never reaches full speed, and lets it spin back down again for most of the copy. What I need is to get full read speeds from Cygwin. Is this a known issue with SP3 or some other recent Windows update? Any other ideas? Update: More testing; Windows will spin up the drive when data is copied with Windows tools, but not when read in place or copied with Cygwin tools. It doesn't make sense to me that Windows spins up the drive for copying, but not for other reads. Might be more of a Cygwin problem? Update 2: GUI activity is sluggish during the problem state -- during the Cygwin verifies, there's a slight but noticable delay when dragging windows or icons around on the desktop, switching windows, Alt-Tabbing through open applications, opening new windows, etc. It reminds me of the delay when opening a Windows Explorer window on My Computer just after inserting a DVD. I've tried updating Cygwin (from 1.5.x to 1.7.x), but no change in the problem behavior. I've also noticed this issue occurs on WinXP SP2, but it's not exactly the same -- some spin-up occurs, so the read happens in ~25-30 minutes instead of 40+. The SP2 system used to run the verifies in ~10 minutes, and when it first changed (not sure exactly when, maybe in late November or early December 2009) I thought it was dying hardware. This is why I suspect an official update of breaking this functionality; this has worked for years on that SP2 box.

    Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >