Search Results

Search found 14961 results on 599 pages for 'mac clients'.

Page 121/599 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

  • Blocking ports in Airport Express

    - by gok
    I want to block torrent and other file sharing apps from Airport Express. How could I achieve this? I am not asking the port numbers. It's so sad that Airport Express is a very closed system. I miss my old Alcatel router in which every setting was possible.

    Read the article

  • Why does my MacBook Pro have long ping times over Wi-Fi?

    - by randynov
    I have been having problems connecting with my Wi-Fi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10 seconds before slowly coming back down. You can see the trend below. I'm on a MacBook Pro and have done the normal stuff (reset the PRAM and SMC, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 and 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

    Read the article

  • OS X not booting after upgrading LibXML2

    - by Federico
    I tried upgrading the version of LibXML2 in my machine to run some propietary software. Compiled as 32-bit (-arch i386) and restarted to see if it worked. Now when I try to boot I can only get into the spinning screen and it just sits there. Restarting in verbose mode (Cmd-V) does not show any error in the process, it just freezes after "AppleIntelCPUPowerManagement: initialization complete". I can't from any CD either (if I press c on startup it just spins the disk around and then stops in the same spinner screen). I've also reset the PRAM/NVRAM to discard any problems with that and it´s still not fixed. Any pointers of what might´ve gone wrong? (Latest gen MBP, running 10.6.3)

    Read the article

  • Powering-down USB Powered Devices on laptop sleep

    - by Carl
    I recently purchased a Targus Lap Chill Mat, which is a USB powered device, but doesn't have any interface/storage/etc function. I'd like it to power-down when my (macbook) laptop sleeps (since the fan obviously doesn't need to be running when the laptop is idle) without having to unplug it. Any suggestions?

    Read the article

  • Can I delete EFI System Partition without harming other data on drive?

    - by Andy
    I have three external HDD's in a USB enclosure. After a recent upgrade to Win7, during which these three drives were actually installed inside the PC tower, two of the three drives now have a 200MB EFI partition, and the two drives do not show up as usable drives under either Win7 or Snow Leopard. One of the drives is empty; the other one, however, has a bunch of stuff on it that I want to save if possible. My question is, how can I get back to this data? Can I simply delete the EFI partition, and all will be well? Or do I have to do something trickier? Or am I just hosed?

    Read the article

  • Backup Gmail using Mail.app and IMAP without redundancy

    - by Cawas
    I don't care for actually using mail app, I use mostly the gmail interface and mail app just for offline, for quickly reading and eventually replying. Everything is working fine, I think I've followed every guide out there... Here's a great one. But I could find nothing about avoiding redundancy. Well, I can manually do that either by using POP or by checking off most of my labels out of IMAP. But I do use a lot of labels and I often label messages with more than 1 label. And I want them on mail app. Is there anyway to make it keep just 1 copy of repeated messages? Maybe there's a message id or checksum that could be used... If there isn't a way to do it, be assured I still prefer having the extra messages and "wasting" space rather than not having any. edit: I've came across many solutions for finding duplicate files, but they just delete the files. That just make things worst: Mail will just sync it all again. I've realized it's probably better to keep two accounts setup, POP for backup and IMAP for everything else with removing the "All Mail" from it. That's because if the "All Mail" on the server is deleted for any reason, my "All Mail" local will also get deleted, while POP will keep all files regardless of the server. This doesn't solve the redundancy issue at all, but it doesn't create any new issue as well, and I can even use the search properly, without duplicated results, if I search just on the POP. So it helps optimizing a little bit. But I still think the best way to solve this issue would be having something such as aamann's Mail Scripts tweaked to hardlinking the duplicates rather than deleting, and optimized to not need to scan everything every time. I'm trying to contact him and see what we can do. At any pace, I'm still looking for an answer!

    Read the article

  • MAMP Pro Uninstaller Throws "The privileged action failed." Error Even After Entering Password

    - by BigM
    I have followed, and successfully completed, every step in this SO article to remove MAMP Pro in favor of installing the free version as I only need it for one site anyway. However, when I run the uninstaller I still get "The privileged action failed." after providing the password. Can anybody shed a little light on this maybe? I'm just trying to get MAMP Pro uninstalled so I can install the free MAMP stack.

    Read the article

  • Bash on Snow Leopard doesn't obey terminal colours

    - by karbassi
    With the new version of Snow Leopard, OSX upgraded the bash version to GNU bash, version 3.2.48(1)-release (x86_64-apple-darwin10.0). Now, my .bashrc sets the following settings: # Colors export TERM=xterm-color export GREP_OPTIONS='--color=auto' GREP_COLOR='1;32' export CLICOLOR=1 export LSCOLORS=ExGxFxDxCxHxHxCbCeEbEb # Setup some colors to use later in interactive shell or scripts export COLOR_NC='\e[0m' # No Color export COLOR_WHITE='\e[1;37m' export COLOR_BLACK='\e[0;30m' export COLOR_BLUE='\e[0;34m' export COLOR_LIGHT_BLUE='\e[1;34m' export COLOR_GREEN='\e[0;32m' export COLOR_LIGHT_GREEN='\e[1;32m' export COLOR_CYAN='\e[0;36m' export COLOR_LIGHT_CYAN='\e[1;36m' export COLOR_RED='\e[0;31m' export COLOR_LIGHT_RED='\e[1;31m' export COLOR_PURPLE='\e[0;35m' export COLOR_LIGHT_PURPLE='\e[1;35m' export COLOR_BROWN='\e[0;33m' export COLOR_YELLOW='\e[1;33m' export COLOR_GRAY='\e[1;30m' export COLOR_LIGHT_GRAY='\e[0;37m' The colours are used later on for output. This used to work in previous version of OSX but not my output is as such: Some ideas that have not worked. Switching Terminal.app from 64-bit to 32-bit.

    Read the article

  • Default Text Color in Apple Mail.app

    - by Axeva
    Is there any way to set the default font color for new messages in Mail.app? It's trivial to set the actual font, and text size. I cannot seem to get the application to change the text color though. It always defaults to black. After 5 or 6 major revisions of OS X, surely someone has thought of this, right?

    Read the article

  • Ad-hoc connection between iPhone and Macbook Pro

    - by Phil Nash
    I sometimes find it useful to connect my iPhone to my Macbook Pro by creating an ad-hoc wireless network from the MBP and connecting to that from the iPhone. However, what I find is that sometimes this works and sometimes it doesn't. When it's not working the symptoms are usually that I see the ad-hoc SSID in the list of available networks on the iPhone, can connect to it from there (including entering my WEP key), and it shows up as the wifi network in use. However I don't get the wifi symbol in the taskbar (it remains as 3G) and attempting to use the connection (e.g. trying to connect to iTunes or Keynote using their respective Remote apps) fails saying that there is so wifi connection. I've tried rebooting both the iPhone and the MBP, recreating networks with different SSIDs and tried different channels - all to no avail! I'm especially puzzled that (a) sometimes it works just fine first time and (b) the Settings app seems to think its all connected fine. Is there anything else I should be trying?

    Read the article

  • What’s the password for my FileVault 2 boot volume?

    - by cbowns
    Apple’s support document for FileVault 2 (a.k.a. “full disk encryption” or “FDE”) has lots of information about enabling FDE and what it means for booting the machine. However, it doesn’t cover one very important thing I’m trying to do: mount the drive in the Recovery HD environment to reinstall OS X on it. The Recovery HD environment asks me for the volume passphrase so it can mount my drive and try to install OS X onto it. If this were an external drive which I’d manually enabled FDE on with diskutil, or an external Time Machine volume, I’d know it because it makes you pick one (just like a regular login password), but FileVault 2 never asked me for a volume passphrase (I assume it selects one behind the scenes). I’ve tried my main user’s password, but that doesn’t work, and neither does the recovery key set for the volume. Keychain Access doesn’t have anything that I could find. How do I unlock this volume?

    Read the article

  • PECL install error after upgrading to OSX 10.8

    - by Clive
    I've just upgraded my OS to Mountain Lion and PECL is no longer working (it's on a test drive so no drama, but I'd like to get it working so I can upgrade the OS on my shiny new SSD as well). I'm using the native PHP installation, no macports/homebrew or anything like that. Running sudo pecl install uploadprogress (for example) produces the following terminal output: downloading uploadprogress-1.0.3.1.tgz ... Starting to download uploadprogress-1.0.3.1.tgz (9,040 bytes) .....done: 9,040 bytes 4 source files, building running: phpize grep: /usr/include/php/main/php.h: No such file or directory grep: /usr/include/php/Zend/zend_modules.h: No such file or directory grep: /usr/include/php/Zend/zend_extensions.h: No such file or directory Configuring for: PHP Api Version: Zend Module Api No: Zend Extension Api No: autom4te: need GNU m4 1.4 or later: /usr/bin/m4 ERROR: `phpize' failed I'm guessing the problem is the 3 grep lines. I've found several threads that suggest this is caused by XCode not being installed...but XCode is installed, and updated to the latest version (4.4). All the relevant symlinks to /Developer/usr/bin/* also exist as they should. m4 is currently at version: m4 (GNU M4) 1.4.13, so even though the output above contains a line pertaining to it, I don't think that can be the problem. I'm sure it's just a simple issue, anyone got any clues?

    Read the article

  • how to upgrade OSX?

    - by abc
    i have 10.5.8 OS X rite now.. i want it to be 10.6.3 .. i have downloaded the update but its ttelling u need 10.6 to update to 10.6.3 ] ] so how to update from 10.5.8 to 10.6.3 ?

    Read the article

  • TextMate GetBundle stopped working in Snow Leopard

    - by Jauder Ho
    It seems that I am no longer able to Get Bundles using TextMate after upgrading to Snow Leopard. I get the following error message. Googling shows no solutions. I have updated to the latest GetBundle via svn to no avail. /Applications/TextMate.app/Contents/SharedSupport/Support/lib/osx/plist.bundle: dlopen(/Applications/TextMate.app/Contents/SharedSupport/Support/lib/osx/plist.bundle, 9): no suitable image found. Did find: (LoadError) /Applications/TextMate.app/Contents/SharedSupport/Support/lib/osx/plist.bundle: no matching architecture in universal wrapper - /Applications/TextMate.app/Contents/SharedSupport/Support/lib/osx/plist.bundle from /Users/jauderho/Library/Application Support/TextMate/Bundles/GetBundles.tmbundle/Support/getBundles.rb:4

    Read the article

  • Stop a runaway launchd process on OS X Leopard

    - by Skylarking
    I created a launchd .plist file to in order to have a python script run every hour. I ended up editing and later deleting the .plist file ( in /Library/LaunchDaemons )... but somehow launchd is still trying to run the script.. The file that the original .plist was calling is also no longer present ( it was in /usr/bin ).. Now every 10 seconds launchd is still attempting to run the script, fails, and respawns... I tried fixing this with Lingon.... to no avail.. Is there a way to kill this process for good? I tried logging out and restarting as well... Machine is running 10.5.8

    Read the article

  • Why does my macbook pro have long ping times over wifi?

    - by randynov
    I have been having problems connecting with my wifi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10s before slowly coming back down. You can see the trend below. I'm on a macbook pro and have done the normal stuff (reset the pram and smc, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 & 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? TIA! Randall PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

    Read the article

  • How do I make dashboard widgets active on logon?

    - by CharlesB
    There are a few dashboard widget that are useful even when not going in Dashboard. For example, SVN Notifier sends a Growl notification when commits are made to a repository you want to watch. Or, Delivery Status does the same for status update on tracked packages. The thing is when I log into OS X, those status updates won't happen until the first time I actually enter into Dashboard, so it looks like they are not initialized at startup. How to fix this?

    Read the article

  • Can I change the "From" name and address without going into Mail.app's preferences?

    - by Arjan van Bentem
    Can I somehow add an editable "From" field to Mail.app, a bit like Virtual Identity for Thunderbird, just like I could change the "Reply To" address on the fly? In Mail.app, one can set up multiple email addresses for a single account by just entering a comma-seperated list like [email protected], [email protected]. Next, when composing a message, Mail offers a dropdown to select a "From" address. And when replying†, it automatically selects the right address if it can find a match: Nice, but I'd like to be able to change the "From" on the fly, without going into the Account Information. Also, in previous versions of Mail one could even specify multiple Full Names for a single account: Email Address: Arjan <[email protected]>, Arjan on SU <[email protected]> But nowadays, Mail only uses the setting of Full Name, and even ignores names in the Email Address field when no value for Full Name is set at all. Hence, it would be great if I could change the Full Name on the fly as well. I had no luck finding a plugin for Mail yet. † When using sub-addressing, anything that is sent to [email protected] is simply delivered to [email protected]. I'd then like to reply with the same full address, rather than just [email protected] if Mail cannot find a match, without going into the Account Information first. I sometimes also want to compose a new message with a new sub-addressing-address.

    Read the article

  • Local area network computer to computer backup software

    - by thegreyspot
    Hi! I would like to back up my other computers on my local home network to my computer. What software would you suggest? I liked crashplan, however their confusing UI, and its ability not to sync, turned me away. But it has the right idea. A bonus would be if the software did not compile everything in to one file, but its ok if it does. Also I would like it to be free

    Read the article

  • What is the Apple Mikey HID Driver for?

    - by Ivan Vucica
    Cheers, does anyone know what component in Macbook identifies itself as "Apple Mikey HID Driver"? Joystick and Gamepad Tester detected my gamepad, the keyboard (with each key as a separate axis/button/whatever) and this mysterious device (with single axis/button identified as 'Page: 0x6, Usage: 0x22' which doesn't update). This is in white Unibody Macbook '09. Remark: While Googling for the component, I stumbled upon this mailing list post mentioning Apple IR?

    Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >